| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI ATIS0300220-2005 | 通訊業制造商,供應商,及相關服務公司的信息交流表示法 | Representation of the Communications Industry Manufacturers, Suppliers, and Related Service Companies for Information Exchange |
| ANSI ATIS0300251-2007 | 信息交流用服務供應商的識別代碼 | Codes for Identification of Service Providers for Information Exchange |
| ANSI C37.06-2000 | 開關裝置.對稱電流限定的交流高壓斷路器.優先額定值和相應要求性能 | Switchgear – AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis – Preferred Ratings and Related Required Capabilities |
| ANSI C37.06a-1989 | 開關裝置.對稱電流限定的交流高壓斷路器.優先額定值和相應要求性能 | Switchgear - AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Preferred Ratings and Related Required Capabilities |
| ANSI C37.17-1997 | 交流和通用直流低壓電力斷路器的斷開裝置 | Trip Devices for AC and General Purpose DC Low-Voltage Power Circuit Breakers |
| ANSI C37.22-1997 | 用于金屬封閉開關設備的室內交流電中壓開關優選額定值和相關要求性能 | Preferred Ratings and Related Required Capabilities for Indoor AC Medium-Voltage Switches Used in Metal-Enclosed Switchgear |
| ANSI C37.50-1989 | 開關設備.封裝式低壓交流電力線路斷路器.試驗程序 | Switchgear – Low-Voltage AC Power Circuit Breakers Used in Enclosures – Test Procedures |
| ANSI C37.51-2003 | 金屬封裝低壓交流電力斷路器開關設備組件.合格試驗規程 | Metal-Enclosed Low-Voltage AC Power-Circuit-Breaker Switchgear Assemblies - Conformance Test Procedures |
| ANSI C37.54-2003 | 金屬封裝開關組件中作為可拆除元件的室內交流高壓斷路器的一致性試驗程序 | Conformance Test Procedures for Indoor Alternating Current High-Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear Assemblies |
| ANSI C37.58-2003 | 金屬封裝的開關設備中使用的室內交流中壓開關的一致性試驗程序 | Conformance Test Procedures for Indoor AC Medium Voltage Switches for Use in Metal-Enclosed Switchgear |
| ANSI C37.85-2002 | 電力開關用交流高壓電力真空斷路器的X射線輻射極限 | Interrupters Used in Power Switchgear, X-Radiation Limits for AC High-Voltage Power Vacuum |
| ANSI/ACCA 10Manual SPS-2010 | 游泳池和溫泉用機械系統.注:正式標題為:游泳池和溫泉用高壓交流電 | Mechanical Systems for Swimming Pools and Spas. Note: Formally Titled "HVAC for Swimming Pools and Spas" |
| ANSI/ASTM A343-1997 | 電源頻率下用瓦特計-安培計-伏特計法和25厘米艾普斯亭(EPSTEIN)機架測定材料交流電磁性能的方法 | Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-Cm Epstein Test Frame |
| ANSI/ASTM A346-1974 | 迪特利(Dieterly)電橋法測定迭片鐵芯樣品的交流電磁性能的方法 | Test Method for Alternating-Current Magnetic Performance of Laminated Core Specimens Using the Dieterly Bridge Method |
| ANSI/ASTM A697-1998 | 伏特計-安培計-瓦特計測定疊層鐵芯樣品交流電磁特性的方法 | Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using the Voltmeter-Ammeter-Wattmeter Methods |
| ANSI/ASTM A804/A 804M-1999 | 在電源頻率下用薄鋼板試樣測試材料交流磁特性的方法 | Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens |
| ANSI/ASTM A889-1997 | 低感應條件下用萬用表和25厘米艾普斯亭(Epstein)框測定材料交流磁特性的方法 | Test Method for Alternating-Current Magnetic Properties of Materials at Low Inductions Using the Wattmeter-Varmeter-Ammeter-Voltmeter Method and 25-cm (250-mm) Epstein Frame |
| ANSI/ASTM A912-1993 | 用萬用表測試非晶材料環形樣品在電源頻率下交流磁特性的方法 | Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Rodial Specimens |
| ANSI/ASTM A932-2001 | 使用萬用表在電源頻率下測試片狀試樣非晶材料交流電磁特性的方法 | Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens |
| ANSI/ASTM A966-1996 | 用交流電流檢驗鋼鍛件磁粒的試驗方法 | Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current |
| ANSI/ASTM D150-1998 | 實心電絕緣材料的交流損耗特性和電容率(介電常數)的試驗方法 | Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials |
| ANSI/ASTM F2361-2009 | 船用低壓≤1000V交流電動機調整用指南.發動機≤500馬力 | Guide for Ordering Low Voltage 1000 Vac or Less Alternating Current Electric Motors for Shipboard Service - Up to and Including Motors of 500 Horsepower |
| ANSI/EIA 454-1978 | 交流用非聚氯聯苯浸漬的固定紙介質和紙-薄膜介質電容器 | Fixed Paper and Film-Paper Dielectric Capacitors with Non-PCB Impregnants for Alternating Current Applications |
| ANSI/EIA 495-A-1989 | 交流電用帶鍍金屬紙引線薄膜介質電容器 | Film Dielectric Capacitors with Metallized Paper Electrodes for Alternating Current Applications |
| ANSI/EIA 580BA00-1997 | 空白詳細規范:固定金屬引線薄膜介電交流電容器 | Blank Detail Specification: Fixed Metallized Electrode Film Dielectric AC Capacitors |
| ANSI/EIA-463-B-2003 | 重型(1型)和輕型(2型)交流電動機起動用固定鋁電解電容器 | Electrolytic Capacitors for Alternating Current Motor Starting, Heavy Duty (Type 1) and Light Duty (Type 2), Fixed Aluminum |
| ANSI/IEEE 1067-2005 | 765kV及以下交流電壓用導電服的使用、保養、維修和試驗指南 | Guide for In-Service Use, Care, Maintenance, and Testing of Conductive Clothing for Use on Voltages up to 765 kV AC |
| ANSI/IEEE 1204-1997 | 端接在低短路容量交流系統的直流鏈路的設計指南.第1部分:交流/直流互相作用現象.第2部分:計劃指南 | Guide for Planning DC Links Terminating at AC Locations Having Low Short-Circuit Capacities, Part I: AC/DC Interaction Phenomena, Part II: Planning Guide |
| ANSI/IEEE 1247-2005 | 額定電壓大于1000伏的交流斷路開關標準 | Standard for Interrupter Switches for Alternating Current, Rated Above 1000 Volts |
| ANSI/IEEE 1312-1993 | 電力系統.標稱工作電壓在230千伏以上的交流電力系統和設備用優選電壓額定值 | Standard Preferred Voltage Ratings for Alternating-Current Electrical Systems and Equipment Operating at Voltages Above 230 kV Nominal |
| ANSI/IEEE 1453-2004 | 交流電力系統的電壓閃變測量和限值推薦規程 | Recommended Practice for Measurement and Limits of Voltage Flicker on AC Power Systems |
| ANSI/IEEE 1547.3-2007 | 分配資源與電力系統互連的監控、信息交流和控制導則 | Guide for Monitoring, Information Exchange, and Control of Distributed Resources Interconnected with Electric Power Systems |
| ANSI/IEEE 1566-2006 | 額定電壓大于等于375kW的可調速交流(AC)驅動器的性能標準 | Standard for Performance of Adjustable Speed AC Drives Rated 375 kW and Larger |
| ANSI/IEEE 1776-2009 | 采用定型纏繞的預絕緣定子線圈的交流電機密封或非密封絕緣系統的熱量評定推薦操作 | Recommended Practice for Thermal Evaluation of Unsealed or Sealed Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils for Machines Rated 15000 V and Below |
| ANSI/IEEE 275-1993 | 采用模繞預絕緣定子線圈的交流電機絕緣系統的熱量評定推薦規程 | Thermal Evaluation of Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils, Recommended Practice for |
| ANSI/IEEE 434-2006 | 交流電機額定電壓≥2300V的絕緣系統功能評估用指南 | Guide for Functional Evaluation of Insulation Systems for AC Electric Machines Rated 2300 V and Above |
| ANSI/IEEE 48-2009 | 應用在額定電壓為2.5kV到765kV層疊的或者額定電壓為2.5kV到500kV擠包絕緣屏蔽電纜的交流電纜終端用要求及試 | Standard for Test Procedures and Requirements for Alternating Current Cable Terminations Used on Shielded Cables Having Laminated Insulation Rated 2.5 kV Through 765 kV or Extruded Insulation Rated 2.5 kV Through 500 kV |
| ANSI/IEEE 522-2004 | 交流旋轉電機用模繞定子線圈的匝間絕緣試驗指南 | Guide for Testing Turn-to-Turn Insulation on Form-Wound Stator Coils for Alternating-Current Rotating Electric Machines |
| ANSI/IEEE 551-2006 | 工業和商用電力系統計算交流短路電流的推薦方法 | Recommended Methods for Calculating AC Short-Circuit Currents in Industrial and Commercial Power Systems |
| ANSI/IEEE 644-1994 | 交流電力線工頻電場和磁場的測量程序 | Procedures for Measurement of Power Frequency Electric and Magnetic Fields from AC Power Lines |
| ANSI/IEEE 80-2000 | 交流變電站接地安全性 | AC Substation Grounding, Safety in |
| ANSI/IEEE 802.15.4a-2007 | 信息技術標準.電信和系統間的信息交流.局域網和城域網.特殊要求.第15.4部分:低速率無線個人區域網(WPANs)用 | Standard for Information Technology - Telecommunications and Information Exchange Between Systems – Local and Metropolitan Area Networks - Specific Requirements – Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications f |
| ANSI/IEEE 802.17-2005 | 信息技術標準.電信和系統間的信息交流.局域網和城域網.特殊要求.第17部分:彈性分組環(RPR)訪問法和物理層規 | Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 17: Resilient Packet Ring (RPR) Access Method & Physical Layer Specifications |
| ANSI/IEEE 802.17b-2007 | 信息技術標準.電信和系統間的信息交流.局域網和城域網.特殊要求.第17部分:彈性分組環(RPR)訪問法和物理層規 | Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 17: Resilient Packet Ring (RPR) Access Method and Physical Layer Specifications - Amen |
| ANSI/IEEE 95-2002 | 帶直流高壓的交流(AC)電機(2300V及以上)的絕緣測試用推薦實施規范 | Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) with High Direct Voltage |
| ANSI/IEEE 958-2003 | 發電站中2400至13800V輔助系統上可調速交流傳動裝置的應用指南 | Guide for Application of AC Adjustable-Speed Drives on 2,400 to 13,800 Volt Auxiliary Systems in Electric Power Generating Stations |
| ANSI/IEEE C37.010-1999 | 基于對稱電流的交流高壓斷路器應用指南 | Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
| ANSI/IEEE C37.011-2005 | 交流高壓斷路器瞬時恢復電壓的應用指南 | Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers |
| ANSI/IEEE C37.012-2005 | 交流高壓斷路器用電容性電流開關的應用指南 | Application Guide for Capacitance Current Switching for AC High-Voltage Circuit Breakers |
| ANSI/IEEE C37.013-1997 | 基于對稱電流的額定交流高壓發電機斷路器用標準 | Standard for AC High-Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis |
| ANSI/IEEE C37.016-2006 | 額定電壓為15.5kV-245kV的交流電流(AC)高壓電路開關標準 | Standard for AC High-Voltage Circuit Switchers rated 15.5 kV through 245 kV |
| ANSI/IEEE C37.04 Corrigendum 1-2009 | 交流高壓斷路器的標準等級結構.勘誤表1 | Standard Rating Structure for AC High-Voltage Circuit Breakers - Corrigendum 1 |
| ANSI/IEEE C37.04-1999 | 交流高壓斷路器用標準額定結構 | Standard Rating Structure for AC High-Voltage Circuit Breakers |
| ANSI/IEEE C37.04b-2009 | 基于對稱電流的交流高壓斷路器的額定結構用IEEE標準.瞬時恢復電壓的說明改變?yōu)榕c標準IEC 62271-100一致的修 | IEEE Standard for Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Amendment to Change the Description of Transient Recovery Voltage for Harmonization with IEC 62271-100 |
| ANSI/IEEE C37.06-2009 | 基于對稱電流的額定交流高壓斷路器用標準.電壓高于1000伏特用優選額定值及其相關要求的功率 | Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Preferred Ratings and Related Required Capabilities for Voltages above 1000 Volts |
| ANSI/IEEE C37.082-1982 | 交流電流斷路器聲壓級的測量 | Standard Methods for the Measurement of Sound Pressure Levels for AC Power Circuit Breakers |
| ANSI/IEEE C37.083-1999 | 交流高壓斷路器的合成電容電路開關試驗指南 | Guide for Synthetic Capacitive Switching Tests of AC High-Voltage Circuit Breakers |
| ANSI/IEEE C37.09-1999 | 基于對稱電流的額定交流高壓斷路器用標準試驗程序 | Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis [Also C37.09a-2005 and C37.09-1999/Cor1-2007] |
| ANSI/IEEE C37.09-1999/Cor 1-2007 | 基于平衡電流的交流高壓電路斷路器的標準試驗規程.技術勘誤1 | Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Corrigendum 1 |
| ANSI/IEEE C37.09a-2005 | 基于對稱電流的交流(AC)高壓斷路器標準試驗程序.修改件1:電容電流開關 | Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Amendment 1: Capacitance Current Switching |
| ANSI/IEEE C37.102-2006 | 交流發電機保護指南 | Guide for AC Generator Protection |
| ANSI/IEEE C37.104-2002 | 交流配電線和輸電線用戶線斷路器自動重閉指南 | Guide for Automatic Reclosing of Line Circuit Breakers for AC Distribution and Transmission Lines |
| ANSI/IEEE C37.13-2008 | 外殼用低壓交流電力斷路器標準 | Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures |
| ANSI/IEEE C37.16-2009 | 低壓交流(635V及以下)和直流(3200V及以下)電力斷路器的優選額定值,相關要求和應用建議的標準 | Standard for Preferred Ratings, Related Requirements, and Application Recommendations for Low-Voltage AC (635V and Below) and DC (3200V and Below) Power Circuit Breakers |
| ANSI/IEEE C37.20.4-2001 | 金屬外殼開關設備用室內交流開關(1kV-38kV)標準 | Standard for Indoor AC Switches (1 kV - 38 kV) for Use in Metal-Enclosed Switchgear |
| ANSI/IEEE C37.27-2009 | 與單獨安裝的限流熔絲一起使用的低壓交流電源斷路器應用指南 | Application Guide for Low-Voltage AC Power Circuit Breakers Applied with Separately Mounted Current-Limiting Fuses |
| ANSI/IEEE C37.41-2008 | 交流電源盒配電系統用高壓＞1000V保險絲、保險絲和斷開斷路器、附單極空氣開關外殼的配電、保險絲斷開開關 | Standard Design Tests for High-Voltage (1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories for Use on AC Power and Distribution Systems |
| ANSI/IEEE C37.60-2003 | 交流系統用架空、座墊安裝式、干燥地下室型和浸沒式自動電路重合閘和故障斷路器的要求 | Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems, Requirements for Overhead, Pad-Mounted, Dry Vault, and Submersible |
| ANSI/IEEE C37.60-2003/Cor 1-2004 | 38kV及以下交流系統用架空底座安裝型、干燥地下室型和浸入式電路自動重合開關和故障斷路器的要求標準 | Standard Requirements for Overhead Pad-Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV - Corrigendum 1 |
| ANSI/IEEE C37.63-2005 | 交流系統用架空、底座安裝型、干拱頂和水中線路自動分段器的要求 | Line Sectionalizers for Alternating-Current Systems, Requirements for Overhead, Pad-Mounted, Dry Vault and Submersible Automatic |
| ANSI/IEEE C37.66-2005 | 交流電系統(1 to 38 kV)用電容器開關的標準要求 | Standard Requirements for Capacitor Switches for Alternating-Current Systems (1 to 38 kV) |
| ANSI/IEEE C37.71-2001 | 三相交流電系統亞層負載斷開開關手工操作要求 | Three Phase, Manually Operated Subsurface Load Interrupting Switches for Alternating-Current Systems, Requirements for |
| ANSI/IEEE C37.74-2003 | 38kv及以下的交流系統用地下、地下室及底座安裝型負載中斷開關設備和熔融中斷開關設備的標準要求 | Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kV |
| ANSI/IEEE C37.96-2000 | 交流電動機保護指南 | Guide for AC Motor Protection |
| ANSI/IEEE C62.11-2005 | 交流電源電路用金屬氧化物避雷器標準 | Standard for Metal-Oxide Surge Arresters for AC Power Circuits (> 1 kV) |
| ANSI/IEEE C62.11a-2008 | 交流電源電路(大于1kV)用金屬氧化電涌放電器的標準.修改件:電站、中間裝置和配電放電器用短路試驗 | Standard for Metal-Oxide Surge Arresters for AC Power Circuits ( 1 kV) - Amendment: Short-Circuit Tests for Station, Intermediate and Distribution Arresters |
| ANSI/IEEE C62.21 Cor 1-2008 | 交流旋轉機械≥1000伏特的電涌保護設備的應用指南.技術勘誤:替代表2和附錄A.1和A.2 | Guide for the Application of Surge Protective Equipment on AC Rotating Machinery 1000 Volts and Greater - Corrigendum 1: Replace Table 2 and Annexes A.1 and A.2 |
| ANSI/IEEE C62.21-2003 | 1000V及以上的交流旋轉電機上浪涌電壓保護設備的應用指南 | Guide for the Application of Surge Voltage Protective Equipment on AC Rotating Machinery 1000 V and Greater (including IEEE C62.21/Cor1-2008) |
| ANSI/IEEE C62.22-2009 | 交流系統中金屬氧化物電涌放電器應用指南 | Guide for the Application of Metal-Oxide Surge Arresters for Alternating-Current Systems |
| ANSI/IEEE C62.41.1-2002 | 低壓(1000V及1000V以下)交流電力電路的電涌環境指南 | Guide on the Surge Environment in Low-Voltage (1000 V and Less) AC Power Circuits |
| ANSI/IEEE C62.41.2-2002 | 低壓(1000 V和其以下)的交流電路的電涌特性推薦規范 | Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and Less) AC Power Circuits |
| ANSI/IEEE C62.45-2002 | 與低壓交流電路連接的設備的電涌試驗指南 | Recommended Practice on Surge Testing for Equipment Connected to Low-Voltage (1000 V and Less) AC Power Circuits |
| ANSI/IEEE C62.62-2000 | 低壓交流電路電涌保護裝置試驗規范 | Test Specifications for Surge-Protective Devices for Low Voltage AC Power Circuits |
| ANSI/IEEE C62.72-2007 | 低壓(1000V或1000V以下)交流電力電路用過電壓保護裝置的應用指南 | Guide for the Application of Surge Protective Devices for Low Voltage (1000 Volts or Less) AC Power Circuits |
| ANSI/SCTE 110-2005 | 混合光纖同軸室外設備狀態監控:HMS發射機應答器用發射機應答器接口總線的交流動力供應（PSTIB） | Hybrid Fiber Coax Outside Plant Status Monitoring: Alternative Power Supply to Transponder Interface Bus (PSTIB) for HMS Transponders |
| ANSI/SCTE 16-2001 | 交流聲調制的試驗程序 | Test Procedure for Hum Modulation |
| ANSI/SCTE 46-2007 | 交流和直流電源的試驗方法 | Test Method for AC to DC Power Supplies |
| ANSI/UL 347-2009 | 中壓交流接觸器,控制器及監控中心標準 | Standard for Medium-Voltage AC Contactors, Controllers, and Control Centres |
| ASNI C92.2-1987 | 標稱工作電壓大于230kV的交流電氣系統和設備用電力系統.首選電壓額定值 | for power systems-alternating-current electrical systemsand equipment operating at voltagesabove 230 kV nominal -preferred voltage ratings |
| ASTM D150-1998(2004) | 固體電絕緣材料(恒定電介質)的交流損耗特性和介電常數的標準試驗方法 | Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation |
| ASTM E2261-2007 | 用交流電場測量技術檢驗焊縫的標準實施規程 | Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique |
| IEEE 1067-1996 | 765kV以下交流電壓使用的導電衣的使用,檢修,維護和試驗指南 | (Guide for in-service use, care, maintenance, and testing of conductive clothing for use on voltages up to 765 kV ac and ?750 kV dc) |
| IEEE 1107-1996 | 交流電動機使用固定片散繞線圈用密封隔熱系統的評定 | (Thermal evaluation of sealed insulation systems for AC electric machinery employing random-wound stator coils) |
| IEEE 117-1974 | 不規則纏繞交流電機絕緣材料系統的評定試驗程序 | (Test procedure for evaluation of systems of insulation materials for random-wound ac electric machinery) |
| IEEE 1204-1997 | 端接在低短路能力交流場所的直流線路的設計指南 | (Guide for planning DC links terminating at AC locations having low short-circuit capacities) |
| IEEE 275-1992 | 交流電機絕緣系統的熱評定推薦規程.額定電壓6900V及以下電機模繞預絕緣定子線圈的使用 | (Recommended practice for thermal evaluation of insulation systems for alternating-current electric machinery; employing form-wound preinsulated stator coils for machines rated 6900 V and below) |
| IEEE 48-1996 | 2.5KV-765KV高壓交流電纜終端的試驗程序和要求 | (Test procedures and requirements for alternating-current cable terminations 2.5 kV through 765 kV) |
| IEEE 522-1992 | 交流旋轉電機模繞定子線圈匝間絕緣的試驗指南 | (Guide for testing turn-to-turn insulation on form-wound stator coils for alternating-current rotating electric machines) |
| IEEE 56-1977 | 大型交流旋轉電機(10kVA及以上)絕緣維護指南 | (Guide for insulation maintenance of large ac rotating machinery (10000 kVA and larger)) |
| IEEE 644-1994 | 交流電力線路工業頻率電場和磁場的測量方法 | (Measurement of power frequency electric and magnetic fields from AC power lines) |
| IEEE 80-2000 | 交流變電站接地安全指南 | (Guide for safety in AC substation grounding) |
| IEEE 95-2002 | 帶直流高壓的交流電動機械(2300V及以上)的絕緣試驗操作規程 | (Practice for insulation testing of AC electric machinery (2300 V and above) with high direct voltage) |
| IEEE C 37.010-1999 | 基于平衡電流的額定交流高壓斷路器應用指南 | (Application guide for AC high-voltage circuit breakers rated on a symmetrical current basis) |
| IEEE C 37.011-1994 | 基于平衡電流的額定交流高壓斷路器瞬變恢復電壓應用指南 | (Application guide for transient recovery voltage for ac high-voltage circuit breakers rated on a symmetrical current basis) |
| IEEE C 37.012-1979 | 基于平衡電流的額定交流高壓斷路器電容電流轉換的應用指南 | (Application guide for capacitance current switching for ac high-voltage circuit breakers rated on a symmetrical current basis) |
| IEEE C 37.013-1997 | 基于平衡電流的交流高壓發電機斷路器 | (AC high-voltage generator circuit breakers rated on a symmetrical current basis) |
| IEEE C 37.04-1999 | 交流高壓斷路器的額定結構 | (Rating structure for ac high-voltage circuit breakers) |
| IEEE C 37.04a-2003 | 基于平衡電流的交流高壓斷路器的額定結構.修改件1:電容電流開關 | (Rating structure for AC high-voltage circuit breakers rated on an symmetrical current basis - Amendment 1: Capacitance current switching) |
| IEEE C 37.081-1981 | 按平衡電流標定的交流高壓斷路器的綜合故障檢測指南 | (Guide for synthetic fault testing of ac high-voltage circuit breakers rated on a symmetrical current basis) |
| IEEE C 37.081a-1997 | 額定在均衡電流基礎上的交流高壓斷路器模擬故障試驗指南補充.8.3.2:終端故障恢復電壓.不平衡短路電流 | (Supplement to guide for synthetic fault testing of AC high-voltage circuit breakers rated on a symmetrical current basis - 8.3.2: Recovery voltage for terminal faults - Asymmetrical short-circuit curr) |
| IEEE C 37.082-1982 | 交流電源斷路器聲壓電平的測量方法 | (Methods for the measurement of sound pressure levels of ac power circuit breakers) |
| IEEE C 37.083-1999 | 交流高壓電路斷路器的合成電容電路開關試驗指南 | (Guide for synthetic capacitive current switching tests of AC high-voltage circuit breakers) |
| IEEE C 37.09-1999 | 基于平衡電流的額定交流高壓斷路器的試驗程序 | (Test procedure for AC high-voltage circuit breakers rated on a symmetrical current basis) |
| IEEE C 37.102-1995 | 交流發電機保護指南 | (Guide for ac generator protection) |
| IEEE C 37.104-2002 | 交流配電線和輸電線用線路斷路器的自動重閉指南 | (Guide for automatic reclosing of line circuit breakers for AC distribution and transmission lines) |
| IEEE C 37.13-1990 | 封裝的低壓交流電源斷路器 | (Low-voltage ac power circuit breakers used in enclosures) |
| IEEE C 37.20.4-2001 | 金屬封裝開關裝置中使用的室內交流開關(1kV--38kV) | (Indoor AC switches (1kV - 38kV) for use in metal-enclosed switchgear) |
| IEEE C 37.27-1987 | 低電壓交流非整體熔斷電源斷路器(使用分開安裝的限流熔斷器)的應用指南 | (Application guide for low-voltage ac nonintegrally fused power circuit breakers (using separately mounted current-limiting fuses)) |
| IEEE C 37.29-1981 | 盒裝的低壓電壓交流電源電路保護器 | (Low-voltage ac power circuit protectors used in enclosures) |
| IEEE C 37.37-1996 | 交流高壓空氣開關加載指南(超過1000V) | (Loading guide for AC high-voltage air switches (in excess of 1000 V)) |
| IEEE C 37.60-2003 | 不大于38kV的交流系統用架空、底座安裝型、干燥地下室型和浸沒式電路自動重合閘和故障斷路器的要求 | (Requirements for overhead, pad-mounted, dry vault, and submersible automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV) |
| IEEE C 37.63-1997 | 交流系統用架空,有墊,干拱頂和水中線路自動分段器的要求 | (Requirements for overhead, pad-mounted, dry-vault, and submersible automatic line sectionalizers for ac systems) |
| IEEE C 37.71-2001 | 交流系統用三相手工操作的地下負載隔離開關 | (Three-phase, manually operated subsurface and vault load-interrupting switches for alternating-current systems) |
| IEEE C 37.74-2003 | 38kv及以下的交流系統用地下、地下室及底座安裝型負載中斷開關設備和熔融負載中斷開關設備的標準要求 | (Requirements for subsurface, vault, and pad-mounted load-interrupter switchgear and fused load-interrupter switchgear for alternating current systems up to 38 kV) |
| IEEE C 37.96-2000 | 交流電動機保護指南 | (Guide for AC motor protection) |
| IEEE C 62.11-1999 | 交流電源電路金屬氧化物電涌放電器 | (Metal-oxide surge arresters for AC power circuits () |
| IEEE C 62.22-1997 | 交流系統中金屬氧化物電涌放電器應用指南 | (Guide for the application of metal-oxide surge arresters for alternating-current systems) |
| IEEE C 62.41-1991 | 低壓交流電源電路中電涌電壓推薦規程 | (Recommended practice on surge voltage in low-voltage ac power circuits) |
| IEEE C 62.41.1-2002 | 低壓(1000V及1000V以下)交流電力電路電涌環境指南 | (Guide on the surge environment in low-voltage (1000 V and less) ac power ciruits) |
| IEEE C 62.41.2-2002 | 低壓(1000V及1000V以下)交流電力網中電涌特性規程 | (Practice on characterization of surges in low-voltage (1000 V and less) ac power circuits) |
| IEEE C 62.45-2002 | 與低壓交流電路連接的設備用電涌試驗規程 | (Practice on surge testing for equipment connected to low-voltage (1000 V and less) ac power circuits) |
| IEEE C 62.62-2000 | 低電壓交流線路的電涌保護裝置的標準試驗規范 | (Standard test specifications for surge-protective devices for low-voltage AC power circuits) |
| UL 1066-1997 | 外殼內用的低壓交流和直流電力斷路器 | (Low-voltage AC and DC power circuit breakers used in enclosures ) |
| UL 1112-1997 | 船用電動機和發電機(啟動、外驅動傾角、配平片、發電機、交流發電機) | (Marine electric motors and generators (cranking, outdrive tilt, trim tab, generators, alternators) ) |
| 編號 | 中文名稱 | 英文名稱 |