| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 185 Index-1973 | 航空和航天術語詞匯.字母順序索引 | Glossary of aeronautical and astronautical terms - Alphabetical index |
| BS 185-1-1969 | 航空和航天術語詞匯.第1節:總則 | Glossary of aeronautical and astronautical terms - General |
| BS 185-10-1970 | 航空和航天術語詞匯.第10節:輔助設施 | Glossary of aeronautical and astronautical terms - Auxiliary services |
| BS 185-13-1972 | 航空和航天術語詞匯.第13節:空中交通管制和地面服務設施 | Glossary of aeronautical and astronautical terms - Air-traffic and ground services |
| BS 185-14-1972 | 航空和航天術語詞匯.第14節:無線電通訊和無線電定位 | Glossary of aeronautical and astronautical terms - Radiocommunication and radiolocation |
| BS 185-15-1972 | 航空和航天術語詞匯.第15節:氣象學 | Glossary of aeronautical and astronautical terms - Meteorology |
| BS 185-16-1973 | 航空和航天術語詞匯.第16節:人員 | Glossary of aeronautical and astronautical terms - Personnel |
| BS 185-17-1973 | 航空和航天術語詞匯.第17節:航空航天醫學 | Glossary of aeronautical and astronautical terms - Aerospace medicine |
| BS 185-18-1970 | 航空和航天術語詞匯.第18節:航天學 | Glossary of aeronautical and astronautical terms - Astronautics |
| BS 185-2-1969 | 航空和航天術語詞匯.第2節:飛行器的飛行動作 | Glossary of aeronautical and astronautical terms - Motion of aircraft |
| BS 185-3-1969 | 航空和航天術語詞匯.第3節:結構 | Glossary of aeronautical and astronautical terms - Structures |
| BS 185-4-1969 | 航空和航天術語詞匯.第4節:空氣動力學 | Glossary of aeronautical and astronautical terms - Aerodynamics |
| BS 185-5-1969 | 航空和航天術語詞匯.第5節:重于空氣的飛行器(重飛行器) | Glossary of aeronautical and astronautical terms - Heavier-than-air aircraft (aerodynes) |
| BS 185-6-1970 | 航空和航天術語詞匯.第6節:彈道導彈和制導導彈 | Glossary of aeronautical and astronautical terms - Ballistic and guided missiles |
| BS 185-7-1969 | 航空和航天術語詞匯.第7節:輕于空氣的飛行器(高空氣球) | Glossary of aeronautical and astronautical terms - Lighter-than-air aircraft (aerostats) |
| BS 185-8-1970 | 航空和航天術語詞匯.第8節:動力裝置 | Glossary of aeronautical and astronautical terms - Power plant |
| BS 185-9-1970 | .航空和航天術語詞匯.第9節:螺旋漿 | Glossary of aeronautical and astronautical terms - Propellers |
| BS 2F 127-1991 | 航空航天用天然或合成彈性體涂層尼龍織物規范 | Specification for nylon fabrics suitable for coating with natural or synthetic elastomers for aerospace purposes |
| BS 2F 128-1992 | 航空航天用的棉帶規范(標稱經紗為R310特) | Specification for cotton webbing suitable for aerospace purposes (warp yarn nominally R 310 tex) |
| BS 2F 132-2002 | 航空航天用規定了尺寸穩定性的尼龍編織繩 | Braided nylon cord with specified dimensional stability for aerospace purposes |
| BS 2F 134-2002 | 航空航天用長條聚酯縫紉細軸線 | Continuous filament polyester sewing thread suitable for aerospace purposes |
| BS 2F 142-1999 | 航空航天用抗水解的涂覆熱塑性聚合物聚氨酯彈性物的尼龍纖維 | Hydrolysis resistant, thermoplastic polyether polyurethane elastomer coated nylon fabric for aerospace purposes |
| BS 2M 52-1989 | 航空航天流體系統用軟管、管子和配件組件的脈沖試驗法 | Method for impulse testing of hydraulic hose, tubing and fitting assemblies for aerospace fluid systems |
| BS 2M 59-1993 | 航空航天流體系統用24度錐形米制連接器接口規范 | Specification for interface of metric couplings, 24 ° cone, for aerospace fluid systems |
| BS 2M 63-1993 | 航空航天流體動力系統端口連接、密封和配件端部的尺寸規范 | Specification for dimensions of aerospace fluid system port connection, seal and fitting end |
| BS 2SP 93-1974 | 航空航天用彈性保護墊圈(丙烯腈-丁二烯)規范 | Specification for elastomeric grommets (acrylonitrile-butadiene) for aerospace use |
| BS 2SP 95-1974 | 航空航天用彈性保護墊圈(氯丁橡膠)規范 | Specification for elastomeric grommets (polychloroprene) for aerospace use |
| BS 2X 27-1991 | 航空航天用纖維素表面光飾方案規范 | Specification for cellulose finishing scheme for aerospace purposes |
| BS 2X 32-1998 | 航空航天用預處理蝕刻油漆膩?zhàn)拥囊?guī)范 | Specification for pre-treatment etch primer for aerospace purposes |
| BS 2X 33-1998 | 航空航天用的兩組分環氧膩?zhàn)右?guī)范 | Specification for two component epoxy primer for aerospace purposes |
| BS 2X 34-1998 | 航空航天用的兩組分聚氨酯光度規范 | Specification for two component polyurethane finish for aerospace purposes |
| BS 2X 35-2003 | 航空航天用選擇性可除去的中間涂層 | Selectively removable intermediate coating for aerospace purposes |
| BS 3A 125 to 3A 132, 3A 136 to 3A 143, 3A 147 to 3A 168, 3A 180, 3A 181, 3A 186, 3A 187, 3A 192, 3A | 航天器用系緊螺母(統一螺紋)規范 | Specification for stiffnuts (Unified threads) for aircraft |
| BS 3F 121-1995 | 航空航天用金屬滑動緊固件規范 | Specification for metallic slide fasteners for aerospace purposes |
| BS 3F 129-2003 | 航空航天用聚酯窄織物 | Woven polyester narrow fabrics for aerospace purposes |
| BS 3F 135-2002 | 航空航天用未規定尺寸穩定性的尼龍編織繩 | Braided nylon cord with unspecified dimensional stability for aerospace purposes |
| BS 3G 231-1997 | 通用航空電纜和航空航天應用導電體規范 | Specification for conductors for general-purpose aircraft electrical cables and aerospace applications |
| BS 3SP 168-169-2002 | 航空航天用的編織橡膠繩組件的外用套管和組合金屬絲 | Ferrules and assembly wires for braided rubber cord assemblies for aerospace use |
| BS 3SP 170-171-2002 | 航空航天用編織的橡膠繩組件 | Braided rubber cord assemblies for aerospace use |
| BS 4A 100-2003 | 航空航天系列.抗拉強度不超過1249MPa的螺栓和空轉螺母的一般要求規范 | Aerospace series - Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa |
| BS 4F 111-2002 | 航天航空用亞麻帶具編織物 | Flax harness webbing for aerospace purposes |
| BS 4F 123-1996 | 航空航天用機織窄幅尼龍織物(標稱值為235分特紗)規范 | Woven nylon narrow fabrics for aerospace purposes (nominally 235 dtex yarns) |
| BS 4F 57-1990 | 航空航天用充氣設備的擦洗棉織物規范 | Specification for scoured cotton fabric for inflatable equipment for aerospace purposes |
| BS 4F 68-2002 | 航空航天設備用硫化橡膠的控制儲存 | Controlled storage of vulcanized rubbers for use in aerospace applications |
| BS 5F 120-2002 | 航空航天用長絲尼龍縫紉細軸線 | Continuous filament nylon sewing threads for aerospace purposes |
| BS 5F 54-2002 | 航天航空用重型亞麻縫紉線 | Heavy duty linen (flax) sewing thread for aerospace purposes |
| BS 5F 58-2002 | 航天航空用棉線 | Cotton thread for aerospace purposes |
| BS 5F 59-2002 | 航天航空用亞麻編織繩 | Braided linen (flax) cord for aerospace purposes |
| BS 5X 17-1998 | 航空航天用油基樹脂清漆規范 | Specification for oleoresinous varnish for aerospace purposes |
| BS 6F 100-1998 | 航空航天用織物檢驗和試驗規程 | Procedure for inspection and testing of textiles for aerospace purposes |
| BS 6F 37-1990 | 航空航天用570g/m*m和 640g/m*m棉粗帆布纖維規范 | Specification for 570 g/m2 and 640 g/m2 cotton canvas fabrics for aerospace purposes |
| BS 6F 55-1991 | 航空航天用345g/m*m和415g/m*m棉粗帆布規范 | Specification for 345 g/m2 and 415 g/m2 cotton canvas fabrics suitable for aerospace purposes |
| BS 7786-2006 | 航空航天系列.MoS2潤滑的耐熱鋼制自鎖六角螺母.等級1100 MPa (環境溫度)315℃ | Specification for unsintered PTFE tapes for general use |
| BS 7F 34-2002 | 航天航空用輕型和中型亞麻縫紉線 | Light and medium duty linen (flax) sewing thread for aerospace purposes |
| BS 7F 47-1990 | 航空航天用棉帶規范 | Specification for cotton tape for aerospace purposes |
| BS 7F 8-1992 | 航空航天用140 g/m*m絲光棉織物及有鋸齒邊的條帶規范 | Specification for 140 g /m2 mercerized cotton fabrics and serrated edge strip for aerospace purposes |
| BS 8F 35-2002 | 航天航空用編織的亞麻花邊線繩 | Braided linen (flax) lacing cord for aerospace purposes |
| BS A 311-1997 | 航空航天.強度級小于或等于1100 MPa的涂層或未涂層金屬材料標稱桿短長度或中等長度MJ螺紋的內部偏移十字形 | Aerospace - Screws, 100 ° reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions |
| BS A 313-1997 | 航空航天.強度級小于或等于1100MPa的涂層或未涂層金屬材料制節徑桿長長度MJ螺紋的內偏移十字形肋狀或非肋狀 | Areospace - Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions |
| BS A 314-1997 | 航空航天.帶MJ螺紋的高度降低和標準交叉平面的平六角頭螺母分類:450 MPa(室溫)/120℃、450 MPa(室溫)/235℃ | Aerospace - Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C, 900 MPa (at ambient temperature)/650 °C, 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/730 °C and 1250 MPa (at ambient temperature)/600 °C - Dimension" |
| BS A 315-1997 | 航空航天.帶MJ螺紋的高度降低和標稱交叉平面的有槽(齒形)六角頭螺母分類:450MPa(室溫)/120℃、450MPa(室溫) | Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C, 900 MPa (at ambient temperature)/650 °C, 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/730 °C and 1250 MPa (at ambient temperature)/60" |
| BS A 332-1999 | 航空航天用1100MPa強度的MJ螺紋鈦合金螺栓.采購規范 | Aerospace - Bolts, with MJ threads, in titanium alloys, strength class 1 100 MPa - Procurement specification |
| BS EN 12312-17-2004 | 航空航天系列.飛行器地面支持設備.特殊要求.空調設備 | Aerospace series - Aircraft ground support equipment - Specific requirements - Air conditioning equipment |
| BS EN 13290-1-1999 | 航天工程管理.一般要求.政策和規則 | Space project management - General requirements - Policy and principles |
| BS EN 13290-2-2001 | 航天項目管理.一般要求.項目分解結構 | Space project management - General requirements - Project breakdown structure |
| BS EN 13290-3-2001 | 航天項目管理.一般要求.項目組織 | Space project management - General requirements - Project organisation |
| BS EN 13290-4-2001 | 航天項目管理.一般要求.項目階段劃分和計劃 | Space project management - General requirements - Project phasing and planning |
| BS EN 13290-5-2001 | 航天項目管理.一般要求.技術狀態管理 | Space project management - General requirements - Configuration management |
| BS EN 13290-6-2001 | 航天項目管理.一般要求.信息/文件管理 | Space project management - General requirements - Information/documentation management |
| BS EN 13290-7-2001 | 航天項目管理.一般要求.費用和進度管理 | Space project management - General requirements - Cost and schedule management |
| BS EN 13291-3-2004 | 航天產品保證.一般要求.材料、機械部件和加工方法 | Space products assurance - General requirements - Materials, mechanical parts and processes |
| BS EN 13701-2001 | 航天系統.術語集 | Space systems - Glossary of terms |
| BS EN 14089-2002 | 航天產品質量保證.有限定時間的庫存材料的控制 | Space product assurance - The control of limited shelf-life materials |
| BS EN 14090-2002 | 航天產品保證.航天材料篩選的燃燒性試驗 | Space product assurance - Flammability testing for the screening of space materials |
| BS EN 14091-2002 | 航天產品保證.航天材料篩選的熱真空除氣試驗 | Space product assurance - Thermal vacuum outgassing test for the screening of space materials |
| BS EN 14092-2002 | 航天工程.航天環境 | Space engineering - Space environment |
| BS EN 14093-2002 | 航天項目管理.復查的組織和實施復查工作 | Space project management - Organization and conduct of reviews |
| BS EN 14097-2002 | 航天產品保證.不合格控制系統 | Space product assurance - Nonconformance control system |
| BS EN 14098-2002 | 航天產品保證.航天材料和工藝篩選的熱循環試驗 | Space product assurance - Thermal cycling test for the screening of space materials and processes |
| BS EN 14099-2002 | 航天產品保證.用壓敏帶測量涂層的剝離和撕開強度 | Space product assurance - Measurement of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes |
| BS EN 14100-2002 | 航天產品保證.載人航天器機組艙使用的材料和組裝器件的脫氣產品的測定 | Space product assurance - The determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment |
| BS EN 14101-2002 | 航天產品保證.應力腐蝕斷裂控制用材料的選擇 | Space product assurance - Material selection for controlling stress-corrosion cracking |
| BS EN 14160-2002 | 航天工程.軟件 | Space engineering - Software |
| BS EN 14514-2005 | 航天工程標準.功能分析 | Space engineering standards - Functional analysis |
| BS EN 14607-1-2005 | 航天工程.機械.熱控制 | Space engineering - Mechanical - Thermal control |
| BS EN 14607-2-2005 | 航天工程.機械.結構 | Space engineering - Mechanical - Structural |
| BS EN 14607-5-1-2005 | 航天工程.機械.航天器液體和電力推進器 | Space engineering - Mechanical - Liquid and electric propulsion for spacecraft |
| BS EN 14607-6-2005 | 航天工程.機械.信號彈 | Space engineering - Mechanical - Pyrotechnics |
| BS EN 14607-7-2005 | 航天工程.機械.機械部件 | Space engineering - Mechanical - Mechanical parts |
| BS EN 14607-8-2005 | 航天工程.機械.材料 | Space engineering - Mechanical - Materials |
| BS EN 14612-2004 | 航天產品保險.自動機械波焊的檢定和驗收 | Space product assurance - Verification and approval of automatic machine wave soldering |
| BS EN 14724-2004 | 航天項目管理.航天標準的設計 | Space project management - Tailoring of space standards |
| BS EN 14725-2003 | 航天工程.檢定 | Space engineering - Verification |
| BS EN 14736-2004 | 航天產品保證.試驗中心質量保證 | Space product assurance - Quality assurance for test centres |
| BS EN 14737-1-2004 | 航天工程.地面系統和操作.原理和要求 | Space engineering - Ground systems and operations - Principles and requirements |
| BS EN 14737-2-2004 | 航天工程.地面系統和操作.文件要求定義(DRDs) | Space engineering - Ground systems and operations - Documents requirements definitions (DRDs) |
| BS EN 14738-2004 | 航天產品保證.危害分析 | Space product assurance - Hazard analysis |
| BS EN 14777-2004 | 航天工程.Multipaction設計和試驗 | Space engineering - Multipaction design and test |
| BS EN 14824-2003 | 航天工程.檢驗 | Space engineering - Testing |
| BS EN 2000-1992 | 質量保證.EN航空航天產品.制造商質量體系的認可 | Quality assurance - EN aerospace products - Approval of the quality system of manufacturers |
| BS EN 2002-1-2005 | 航天航空系列.金屬材料.試驗方法.室溫下抗拉試驗 | Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature |
| BS EN 2002-2-2005 | 航天航空系列.金屬材料.試驗方法.高溫下抗拉試驗 | Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature |
| BS EN 2003-009-2007 | 航空航天系列.試驗方法.鈦和鈦合金.表面污染測定 | Aerospace series - Test methods - Titanium and titanium alloys - Determination of surface contamination |
| BS EN 2003-010-2007 | 航空航天系列.鈦和鈦合金.試驗方法.抽樣測定氫含量 | Aerospace series - Titanium and titanium alloys - Test methods - Sampling for determination of hydrogen content |
| BS EN 2044-2001 | 航空航天系列.鋁及鋁合金拉制圓棒.公差等級h11.直徑為4mm D 63mm.尺寸 | Aerospace series - Round bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm D 63 mm - Dimensions |
| BS EN 2045-2001 | 航空航天系列.鋁及鋁合金拉制方棒.公差等級h11.厚度為6mm a 50mm.尺寸 | Aerospace series - Square bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm a 50 mm - Dimensions |
| BS EN 2047-2001 | 航空航天系列.帶邊的L形鋁及鋁合金擠壓件.尺寸 | Aerospace series - Beaded L-section extruded, in aluminium and aluminium alloys - Dimensions |
| BS EN 2048-2001 | 航空航天系列.鋁合金L形擠壓型材.尺寸 | Aerospace series - Extruded L-section in aluminium alloys - Dimensions |
| BS EN 2049-2001 | 航空航天系列.U形鋁及鋁合金擠壓件.尺寸 | Aerospace series - Extruded channel section, in aluminium alloys - Dimensions |
| BS EN 2050-2001 | 航空航天系列.T形鋁及鋁合金擠壓件.尺寸 | Aerospace series - Extruded T-section, in aluminium alloys - Dimensions |
| BS EN 2066-2002 | 航空航天系列.鋁合金擠制型材.一般公差 | Aerospace series - Extruded section in aluminium alloys - General tolerances |
| BS EN 2071-2002 | 航空航天系列.鋁及鋁合金板.厚度為0.25mm a 6mm.尺寸 | Aerospace series - Sheets in aluminium and aluminium alloys - Thickness 0,25 mm a 6 mm - Dimensions |
| BS EN 2072-2005 | 航空航天系列.AL-P1050A-H14型鋁合金.薄板材和帶材.0.4mm≤a≤6mm | Aerospace series - Aluminium AL-P1050A - H14 - Sheet and strip - 0,4 mm <= a <= 6 mm |
| BS EN 2078-2002 | 航空航天系列.金屬材料.制造進度表、檢驗進度表、檢驗和試驗報告.定義、一般原則、準備和批準 | Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval |
| BS EN 2083-2001 | 航空航天系列.電纜用銅及銅合金導體.產品標準 | Aerospace series - Copper and copper alloy conductors for electrical cables - Product standard |
| BS EN 2084-2005 | 航空航天系列.單芯、通用、帶銅或銅合金導體的電纜.技術規范 | Cables, electric, single-core, general purpose, with conductors in copper or copper alloy — Technical specification |
| BS EN 2085-2005 | 航空航天系列.鋁合金AL-P2618A-T6.手鍛和模鍛件.a150 mm | Aerospace series - Aluminium alloy AL-P2618A-T6 - Hand and die forgings - a 150 mm |
| BS EN 2086-2005 | 航空航天系列.鋁合金AL-P2618A-T851.手鍛和模鍛.a150 mm | Aerospace series - Aluminium alloy AL-P2618A-T851 - Hand and die forgings - a 150 mm |
| BS EN 2087-2005 | 航空航天系列. 鋁合金ALP2014A.T6 或 T62型.0.4 mm <= a <= 6 mm的層覆薄板材和帶材 | Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheet & strip 0,4 mm <= a <= 6 mm |
| BS EN 2088-2005 | 航空航天系列.AL-P2014A-T4型或AL-P2014A-T42型鋁合金.覆層薄板材和帶材.0.4mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P2014A - T4 or T42 - Clad sheet and strip - 0,4 mm <= a <= 6 mm |
| BS EN 2092-2005 | 航空航天系列.鋁合金AL-P7075.T6或T62.覆層鋁合金板材及帶材.0.4mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip - 0,4 mm a 6 mm |
| BS EN 2130-2001 | 航空航天系列.儀器和設備用耐蝕鋼制軸承和精密滾珠.技術規范 | Aerospace Series - Bearings, precision ball in corrosion resisting steel for instruments and equipment - Technical specification |
| BS EN 2131-2002 | 航空航天系列.鋁合金板.厚度6mm < a> 160mm.尺寸 | Aerospace series - Plates in aluminium alloys - Thickness 6 mm a 160 mm - Dimensions |
| BS EN 2134-2002 | 航空航天系列.鋁及鋁合金擠制圓棒.直徑為10mm D 220mm.尺寸 | Aerospace series - Round bars, extruded in aluminium and aluminium alloys - Diameter 10 mm D 220 mm - Dimensions |
| BS EN 2243-1-2005 | 航空航天系列.非金屬材料.結構膠粘劑.試驗方法.單面搭接剪切 | Non-metallic materials - Structural adhesives - Test method - Part 1: Single lap shear |
| BS EN 2243-2-2005 | 航空航天系列.非金屬材料.結構膠粘劑.試驗方法.金屬間剝離試驗 | Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal |
| BS EN 2243-3-2005 | 航空航天系列.非金屬材料.結構膠粘劑.試驗方法.金屬蜂窩狀?yuàn)A心材料的剝離試驗 | Non-metallic materials - Structural adhesives - Test method - Part 3: Peeling test metal-honeycomb core |
| BS EN 2243-4-2005 | 航天航空系列.非金屬材料.結構膠粘劑.試驗方法.金屬蜂窩狀芯材的平面拉伸試驗 | Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 4: Metal-honeycomb core flatwise tensile test |
| BS EN 2243-5-2005 | 航空航天系列.非金屬材料.結構膠粘劑.試驗方法.老化試驗 | Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests |
| BS EN 2243-6-2005 | 航空航天系列.非金屬材料.結構膠粘劑.試驗方法.剪切應力和剪切應變量測定 | Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain |
| BS EN 2256-2005 | 航空航天系列.鋁合金AL-P2618A-T852.手鍛和模鍛.a150 mm | Aerospace series - Aluminium alloy AL-P2618A-T852 - Hand and die forgings - a 150 mm |
| BS EN 2266-003-2005 | 航空航天系列.通用電纜.操作溫度為-55 °C 到 200 °C.噴墨可印刷.產品標準 | Cables, electrical, for general purpose — Operating temperatures between -55 °C and 200 °C — Part 003: Ink jet printable — Product standard |
| BS EN 2266-005-2005 | 航空航天系列.通用電纜.操作溫度為-55 °C 到 200 °C .紫外激光可印刷.產品標準 | Cables, electrical, for general purpose — Operating temperatures between??-55 ℃ and 200 ℃ — Part 005: UV laser printable — Product standard |
| BS EN 2266-007-2005 | 航空航天系列.通用電纜.操作溫度為-55 °C 到 200 °C .紫外激光可印刷多芯裝套電纜.產品標準 | Cables, electrical, for general purpose — Operating temperatures between –55 ℃ and 200 ℃ — Part 007: UV laser printable multicore jacketed cable — Product standard |
| BS EN 2267-002-2005 | 航空航天系列.一般用途電纜.工作溫度-55℃～260℃.第002部分:總則 | Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 002: General |
| BS EN 2267-005-2006 | 航空航天系列.一般用途的電纜.工作溫度為-55℃到260℃.第005部分:UV可激光打印的產品標準 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 005: UV laser printable - Product standard |
| BS EN 2267-009-2005 | 航空航天系列.一般用途電纜.工作溫度-55℃～260℃.第009部分:DRA族、單芯和多芯電纜.產品標準 | Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 009: DRA family, single and multicore assembly — Product standard |
| BS EN 2267-010-2005 | 航空航天系列.一般用途電纜.工作溫度-55℃～260℃.第010部分:DR族、單芯電纜紫外激光印字.產品標準 | Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 010: DR family, single UV laser printable — Product standard |
| BS EN 2327-2006 | 航空航天系列.飛行操縱桿用鎘鍍金合金鋼制的徑向鋸齒鎖緊墊圈.尺寸 | Aerospace series - Washers, lock, with radial serrations in alloy steel, cadmium plated for flight control rods - Dimensions |
| BS EN 2328-2006 | 航空航天系列.飛行操縱桿用耐蝕鋼鎘鍍金調整片墊圈.尺寸 | Washers, tab in corrosion resisting steel, cadmium plated for flight control rods - Dimensions |
| BS EN 2335-2005 | 航空航天系列.無裝配槽的耐蝕鋼制球面軸承規范.尺寸和載荷 | Aerospace series — Bearings, spherical plain in corrosion resisting steel without assembly slot — Dimensions and loads |
| BS EN 2336-2005 | 航空航天系列.帶裝配槽的鋼制球面滑動軸承.尺寸和負載 | Aerospace series - Bearings, spherical plain in steel with assembly slots - Dimensions and loads |
| BS EN 2337-2006 | 航空航天系列.球面關節軸承.技術規范 | Spherical plain bearings - Technical specification |
| BS EN 2338-2001 | 航空航天系列.熱軋鈦和鈦合金薄板材.厚度為0.8mm 6mm.尺寸 | Aerospace series - Sheets, hot rolled in titanium and titanium alloys - Thickness 0,8 mm a 6 mm - Dimensions |
| BS EN 2339-2001 | 航空航天系列.冷軋鈦和鈦合金薄板材.厚度為0.2mm a 6mm.尺寸 | Aerospace series - Sheets, cold rolled in titanium and titanium alloys - Thickness 0,2 mm a 6 mm - Dimensions |
| BS EN 2344-2001 | 航空航天系列.耐熱合金制的圓形棒材.直徑大于10mm小于180mm.尺寸 | Aerospace series - Round bars, machined in heat resisting alloys - Diameter 10 mm D 180 mm - Dimensions |
| BS EN 2346-002-2006 | 航空航天系列.耐火電纜.工作溫度在-65℃ ～260℃.第002部分:總則 | Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 002: General |
| BS EN 2346-003-2006 | 航空航天系列.耐火電纜.工作溫度-65℃～260℃.第003部分:DL類單芯電纜 | Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 003: DL family, single core - Product standard |
| BS EN 2346-004-2006 | 航空航天系列.耐火電纜.工作溫度在-65℃ ～260℃.DN族單邊UV激光可打印和多芯組合電纜.輕質.產品標準 | Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 004: DN family, single UV laser printable and multicore assembly - Light weight - Product standard |
| BS EN 2349-201-2006 | 航空航天系列.繼電器和電流接觸器要求和試驗程序.第201部分:視覺檢驗 | Aerospace series — Requirements and test procedures for relays and contactors — Part 201: Visual inspection |
| BS EN 2349-202-2006 | 航空航天系列.繼電器和電流接觸器要求和試驗程序.第202部分:尺寸和質量檢驗 | Aerospace series — Requirements and test procedures for relays and contactors — Part 202: Examination of dimensions and mass |
| BS EN 2349-301-2006 | 航空航天系列.繼電器和電流接觸器要求和試驗程序.第301:部分:電壓升和電壓降 | Aerospace series — Requirements and test procedures for relays and contactors — Part 301: Pick-up and drop-out voltage |
| BS EN 2349-302-2006 | 航空航天系列.繼電器和電流接觸器要求和試驗程序.第302部分:絕緣強度 | Aerospace series — Requirements and test procedures for relays and contactors — Part 302: Insulation resistance |
| BS EN 2349-303-2006 | 航空航天系列.繼電器和電流接觸器要求和試驗程序.第303部分:電介質強度 | Aerospace series — Requirements and test procedures for relays and contactors — Part 303: Dielectric strength |
| BS EN 2349-304-2006 | 航空航天系列.繼電器和電流接觸器要求和試驗程序.第304部分:工作和電流釋放時間 | Aerospace series — Requirements and test procedures for relays and contactors — Part 304: Operate and release time |
| BS EN 2349-305-2006 | 航空航天系列.繼電器和接觸器的要求和試驗規程.釋放時間 | Aerospace series - Requirements and test procedures for relays and contactors - Bounce time |
| BS EN 2349-306-2006 | 航空航天系列.繼電器和電流接觸器要求和試驗程序.第306部分:交直流負荷 | Aerospace series — Requirements and test procedures for relays and contactors — Part 306: Overload d.c. and a.c. |
| BS EN 2349-307-2006 | 航空航天系列.繼電器和電流接觸器要求和試驗程序.第307部分:接觸電壓降 | Aerospace series — Requirements and test procedures for relays and contactors — Part 307: Contact voltage drop |
| BS EN 2349-308-2006 | 航空航天系列.繼電器和電流接觸器要求和試驗程序.第308部分:線圈電流 | Aerospace series — Requirements and test procedures for relays and contactors — Part 308: Coil current |
| BS EN 2349-309-2006 | 航空航天系列.繼電器和電流接觸器要求和試驗程序.第309部分:輸出尖峰信號 | Aerospace series — Requirements and test procedures for relays and contactors — Part 309: Exported spikes |
| BS EN 2349-310-2006 | 航空航天系列.繼電器和電流接觸器要求和試驗程序.第310部分:斷裂 | Aerospace series — Requirements and test procedures for relays and contactors — Part 310: Rupture |
| BS EN 2349-312-2006 | 航空航天系列.繼電器和電流接觸器要求和試驗程序.第312部分:電器使用壽命.混合負載 | Aerospace series — Requirements and test procedures for relays and contactors — Part 312: Electrical service life — Mixed load |
| BS EN 2349-316-2006 | 航空航天系列.繼電器和電流接觸器要求和試驗程序.第316部分:機械壽命(減負荷耐用性) | Aerospace series — Requirements and test procedures for relays and contactors — Part 316: Mechanical life (Endurance at reduced load) |
| BS EN 2349-317-2006 | 航空航天系列.繼電器和電流接觸器要求和試驗程序.第317部分:線圈開關設備使用壽命 | Aerospace series — Requirements and test procedures for relays and contactors — Part 317: Service life of coil switching device |
| BS EN 2349-318-2006 | 航空航天系列.繼電器和電流接觸器要求和試驗程序.第318部分:高溫電壓升和低溫電壓降試驗 | Aerospace series — Requirements and test procedures for relays and contactors — Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature |
| BS EN 2349-319-2006 | 航空航天系列.繼電器和電流接觸器要求和試驗程序.第319部分:失效試驗 | Aerospace series — Requirements and test procedures for relays and contactors — Part 319: Miss test |
| BS EN 2349-402-2006 | 航空航天系列.繼電器和電流接觸器要求和試驗程序.第402部分:噴霧鹽腐蝕性 | Aerospace series — Requirements and test procedures for relays and contactors — Part 402: Corrosion, salt spray |
| BS EN 2349-405-2006 | 航空航天系列.繼電器和電流接觸器要求和試驗程序.第405部分:流動阻力 | Aerospace series — Requirements and test procedures for relays and contactors — Part 405: Fluid resistance |
| BS EN 2349-407-2006 | 航空航天系列.繼電器和電流接觸器要求和試驗程序.第407部分:低溫/低壓和濕熱試驗 | Aerospace series — Requirements and test procedures for relays and contactors — Part 407: Cold/low pressure and moist heat |
| BS EN 2395-2005 | 航空航天系列.AL-P2014A-T4或T42鋁合金.0.4mm≤a≤6mm 薄板和帶材 | Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Sheet and strip - 0,4 mm a 6 mm |
| BS EN 2424-1995 | 航空航天產品標記 | Marking of aerospace products |
| BS EN 2435-002-2006 | 航空航天系列.涂料和清漆.耐腐蝕加鉻酸鹽雙組分冷固化底漆.強耐腐蝕性 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - High corrosion resistance |
| BS EN 2435-003-2006 | 航空航天系列.涂料和清漆.耐腐蝕加鉻酸鹽雙組分冷固化底漆.強耐腐蝕性和耐流動性 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - High corrosion and fluid resistance |
| BS EN 2435-004-2006 | 航空航天系列.涂料和清漆.耐腐蝕加鉻酸鹽雙組分冷固化底漆.有表面制備公差的強耐腐蝕性和耐流動性 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - High corrosion and fluid resistance with surface preparation tolerance |
| BS EN 2436-006-2006 | 航空航天系列.涂料和清漆.不含鉻酸鹽的雙組分冷固化環氧底漆的耐腐蝕性.軍用強耐腐蝕性 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing epoxy primer - High corrosion resistance for military application |
| BS EN 2437-2002 | 航空航天系列.鋁及鋁合金的鉻酸鹽轉化涂層(黃色) | Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys |
| BS EN 2469-2007 | 航空航天系列.FE-PA3901(X1CrNi18-10)型鋼.空氣熔煉.軟化的.線材.0.4mm≤D≤12.5mm.450MPa≤Rm≤650MPa | Aerospace series - Steel FE-PA3901 (X1CrNi18-10) - Air melted - Softened - Wires - 0,4 mm D 12,5 mm - 450 MPa Rm 650 MPa |
| BS EN 2486-2005 | 航天航空系列.AL-P2618A 型鋁合金.鍛坯件 | Aerospace series - Aluminium alloy AL-P2618A - Forging stock |
| BS EN 2544-1990 | 航空航天用設備圖紙的鉚釘表述規范 | Specification for representation of rivets on drawings for aerospace equipment |
| BS EN 2546-2006 | 航空航天系列.飛行操縱桿用鈍化耐蝕鋼制的徑向鋸齒鎖緊墊圈.尺寸 | Washers, lock with radial serrations in corrosion resisting steel passivated for flight control rods - Dimensions |
| BS EN 2549-2006 | 航空航天系列.二硫化鉬潤滑陽極處理的鈦制短螺紋緊公差標準螺桿標準六角頭螺栓.等級:1100MPa(室溫)/315℃ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature) / 315 °C |
| BS EN 2584-2001 | 航空航天系列.具有自潤滑軸套的球面耐蝕鋼軸承.窄系列.環境溫度下的高負荷.尺寸和負荷 | Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads |
| BS EN 2585-2001 | 航空航天系列.具有自潤滑軸套的球面耐蝕鋼軸承.寬系列.環境溫度下的高負荷.負荷和尺寸 | Aerospace series - Bearings, spherical plain in corrosion-resisting steel with self-lubricating liner - Elevated load at ambient temperature - Dimensions and loads |
| BS EN 2588-2006 | 航空航天系列.帶裝配槽的耐蝕鋼普通球面軸承.尺寸和負荷 | Bearings, spherical plain in corrosion resisting steel with assembly slots - Dimensions and loads |
| BS EN 2591-100-2005 | 航空航天系列.電器和光學連接元件.試驗方法.總則 | Elements of electrical and optical connection — Test methods — Part 100: General |
| BS EN 2591-212-2005 | 航空航天系列.電和光學連接元件.試驗方法.表面?zhèn)鬏斪杩? | Elements of electrical and optical connection — Test methods — Part 212: Surface transfer impedance |
| BS EN 2591-214-2005 | 航空航天系列.電氣和光學連接元器件.試驗方法.雷擊、電流和電壓脈沖 | Elements of electrical and optical connection — Test methods — Part 214: Lightning strike, current and voltage pulse |
| BS EN 2591-220-2005 | 航空航天系列.電和光學連接元件.試驗方法.電流和溫度周期性變化引起的觸點/導體接頭老化 | Elements of electrical and optical connection — Test methods — Part 220: Contact/conductor joint ageing by current and temperature cycling |
| BS EN 2591-423-2005 | 航空航天系列.電和光學連接元件.試驗方法.連接器背部組件的螺紋強度 | Elements of electrical and optical connection — Test methods — Part 423: Connector rear accessories thread strength |
| BS EN 2591-515-2005 | 航空航天系列.電和光學連接元件.試驗方法.液壓穩定性 | Elements of electrical and optical connection — Test methods — Part 515: Hydrolytic stability |
| BS EN 2591-606-2002 | 航空航天系列.光學和電子連接元件.試驗方法.光學元件.串音 | Aerospace series - Elements of electrical and optical connection - Test methods - Optical elements - Crosstalk |
| BS EN 2591-609-2005 | 航空航天系列.電和光學連接元件.試驗方法.光學元件.電纜附件有效性.電纜循環可撓性 | Elements of electrical and optical connection — Test methods — Part 609: Optical elements — Effectiveness of cable attachment — Cable cyclic flexing |
| BS EN 2591-614-2002 | 航空航天系列.光電連接元件.試驗方法.光學元件.連接器徑向壓縮 | Aerospace series - Elements of electrical and optical connection - Test methods - Optical elements - Connector radial compression |
| BS EN 2591-617-2002 | 航空航天系列.光學和電子連接元件.試驗方法.光學元件.溫度循環試驗 | Aerospace series - Elements of electrical and optical connection - Test methods - Optical elements - Temperature cycling |
| BS EN 2591-6321-2002 | 航空航天系列.光學和電子連接元件.試驗方法.光學元件.濕熱,循環試驗 | Aerospace series - Elements of electrical and optical connection - Test methods - Optical elements - Damp heat, cyclic test |
| BS EN 2591-6323-2002 | 航空航天系列.電氣和光學連接元件.試驗方法.光學元件.熱沖擊(密封裝置) | Aerospace series - Elements of electrical and optical connection - Test methods - Optical elements - Thermal shock (Hermetically sealed devices) |
| BS EN 2599-2001 | 航空航天系列.鋁和鋁合金帶材.厚度0.25mm,3.2mm.尺寸 | Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm a 3.2 mm - Dimensions |
| BS EN 2602-2005 | 航空航天系列.帶鎖環的螺紋適配器端口.幾何構型 | Aerospace series - Ports for adaptors, threaded, with lockring - Geometric configuration |
| BS EN 2603-2005 | 航空航天系列.帶鎖環的螺紋適配器端口端部.幾何構型 | Aerospace series - Port ends for adaptors, threaded, with lockring - Geometric configuration |
| BS EN 2604-2005 | 航空航天系列.8 °30'帶鎖環的螺紋適配器接口.幾何構型 | Aerospace series - 8 ° 30' interface for adaptors, threaded, with lockring - Geometric configuration |
| BS EN 2605-2005 | 航空航天系列.24 °帶鎖環的螺紋適配器接口.幾何構型 | Aerospace series - 24 ° interface for adaptors, threaded, with lockring - Geometric configuration |
| BS EN 2607-2005 | 航空航天系列.帶鎖緊螺紋接合器用O型密封圈.調查 | Aerospace series - O-rings for adaptors, threaded, with lockring - Survey |
| BS EN 2608-2005 | 航空航天系列.8°30'帶鎖環的螺紋適配器的安裝和移除要求 | Aerospace series - Installation and removal requirements for 8 ° 30' adaptors, threaded, with lockring |
| BS EN 2617-2001 | 航空航天系列.鈦和鈦合金板材.厚度6mm< a> 100mm.尺寸 | Aerospace Series - Plates in titanium and titanium alloys - Thickness 6 mm a 100 mm - Dimensions |
| BS EN 2622-2001 | 航空航天系列.流體用耐熱合金制的圓形管材.直徑為3.2mm 100mm.尺寸 | Aerospace Series - Circular tubes, for fluids in heat resisting alloys - Diameter 3,2 mm D 100 mm - Dimensions |
| BS EN 2624-2007 | 航空航天系列.水壓系統元件的壓力脈沖測試 | Aerospace series - Pressure impulse testing of hydraulic system components |
| BS EN 2632-2005 | 航空航天系列.鋁合金AL-P7075.T73511.擠壓棒材和型材.周邊粗晶粒控制a或 D <= 150mm | Aerospace series - Aluminim alloy AL-P7075 - T73511 - Extruded bar and section - a or D <= 150 mm with peripheral coarse grain control |
| BS EN 2635-2005 | 航空航天系列.鋁合金AL-P2014A.T6511.擠壓棒材和型材.a/D≤200mm周邊粗粒控制 | Aerospace series - Aluminium alloy AL-P2014A - T6511 - Extruded bar and section - a or D <= 200 mm with peripheral coarse grain control |
| BS EN 2645-2005 | 航空航天系列.帶鎖環的螺紋適配器的鎖環.尺寸 | Lockrings for adaptors, threaded, with lockring — Dimensions |
| BS EN 2656-2001 | 航空航天系列.管連接件.焊接的連接件端頭.幾何布局 | Aerospace series - Pipe coupling - Coupling end, welded - Geometric configuration |
| BS EN 2667-6-2002 | 航空航天系列.非金屬材料.泡沫結構粘合劑.試驗方法.吸水性的測定 | Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Determination of water absorption |
| BS EN 2680-2006 | 航空航天系列.MoS2潤滑鎘鍍層鋁合金雙耳游動自調自鎖托板螺母.等級:900MPa(室溫)/235℃ | Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 235 °C |
| BS EN 2681-2005 | 航空航天系列.鋁合金AL-P7010-T74.手鍛和模鍛.a150 mm | Aerospace series - Aluminium alloy AL-P7010-T74 - Hand and die forgings - a 150 mm |
| BS EN 2684-2005 | 航空航天系列.鋁合金AL-P7010-T7651.板材.6mma140mm | Aerospace series - Aluminium alloy AL-P7010-T7651 - Plate - 6 mm a 140 mm |
| BS EN 2687-2005 | 航空航天系列.鋁合金AL-P7010-T7451.板材.6mma160mm | Aerospace series - Aluminium alloy AL-P7010-T7451 - Plate - 6 mm a 160 mm |
| BS EN 2693-2005 | 航空航天系列.AL-P5086-H111鋁合金.0.3mm≤a≤6mm 薄板和帶材 | Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip . 0,3 mm a 6 mm |
| BS EN 2694-2005 | 航空航天系列.AL-P6061-T6或T62鋁合金.0.4mm≤a≤6mm 薄板和帶材 | Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Sheet and strip - 0,4 mm a 6 mm |
| BS EN 2695-2005 | 航空航天系列.AL-P6081-T6鋁合金.0.3mm≤a≤6mm薄板和帶材 | Aerospace series - Aluminium alloy AL-P6081-T6 - Sheet and strip . 0,3 mm a 6 mm |
| BS EN 2696-2005 | 航空航天系列.AL-P7075-T6或T62鋁合金.0.4mm≤a≤6mm 薄板和帶材 | Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Sheet and strip - 0,4 mm a 6 mm |
| BS EN 2702-2005 | 航空航天系列.鋁合金.AL-P6061.T6或T62.拉拔或擠壓棒材和型材.a/D≤200mm | Aerospace series - Aluminium alloy - AL-P6061 - T6 or T62 - Drawn or extruded bar and section - a or D <= 200 mm |
| BS EN 2713-002-2006 | 航空航天系列.通用單股和多股電纜.-55℃～200℃工作溫度.置于殼內屏蔽的.總則 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 002: Screened and jacketed - General |
| BS EN 2713-003-2005 | 航空航天系列.單芯和多芯電纜的一般用途.操作溫度在-55 °C 和200 °C之間.屏蔽式（螺旋式）和有護套的可印 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, ink jet printable - Product standard |
| BS EN 2713-004-2006 | 航空航天系列.一般用途的單股和多股電纜.-55℃～200℃工作溫度.置于殼內和屏蔽的噴墨打印的.產品標準 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 004: Screened (braided) and jacketed, ink jet printable - Product standard |
| BS EN 2713-005-2006 | 航空航天系列.通用單股和多股電纜.-55℃～200℃工作溫度.第005部分:CO2激光可打印的屏蔽和鎧裝電纜.產品標 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 005: Screened (spiral) and jacketed, CO laser printable - Product standard |
| BS EN 2713-006-2006 | 航空航天系列.一般用途的單股和多股電纜.-55℃～200℃工作溫度.置于殼內和屏蔽的CO2可激光打印的.產品標準 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 006: Screened (braided) and jacketed, CO2 laser printable - Product standard |
| BS EN 2713-007-2005 | 航空航天系列.單芯和多芯電纜的一般用途.操作溫度在-55 °C 和200 °C之間.屏蔽式（螺旋式）和有護套的可印 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, UV laser printable - Product standard |
| BS EN 2713-008-2006 | 航空航天系列.一般用途的單股和多股電纜.-55℃～200℃工作溫度.置于殼內和屏蔽的UV可激光打印的.產品標準 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 008: Screened (braided) and jacketed, UV laser printable - Product standard |
| BS EN 2713-009-2006 | 航空航天系列.通用單股和多股電纜.-55℃～200℃工作溫度.第009部分:YAG X3激光打印屏蔽和鎧裝電纜 .產品標 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable - Product standard |
| BS EN 2713-010-2006 | 航空航天系列.一般用途的單股和多股電纜.-55℃～200℃工作溫度.置于殼內和屏蔽的YAG X3可激光打印.產品標準 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 010: Screened (braided) and jacketed, YAG X3 laser printable - Product standard |
| BS EN 2713-011-2006 | 航空航天系列.通用單股和多股電纜.-55℃～200℃工作溫度.DR族.置于殼內鍍銀銅屏蔽的可UV激光打印的.產品標 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 011: Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard |
| BS EN 2714-002-2005 | 航空航天系列.通用單芯和多芯電纜.-55度和260度之間操作.屏蔽和護套電纜.總則 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 002: Screened and jacketed — General |
| BS EN 2714-003-2005 | 航空航天系列.一般用途單芯和多芯電纜 .工作溫度55℃～260℃.第003部分:屏蔽的(螺旋的)、有護套和可噴墨印 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 003: Screened (spiral) and jacketed, ink jet printable — Product standard |
| BS EN 2714-004-2006 | 航空航天系列.通用單股和多股電纜.-55℃～260℃工作溫度.第004部分:噴墨可打印的屏蔽和鎧裝電纜.產品標準 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 004: Screened (braided) and jacketed, ink jet printable - Product standard |
| BS EN 2714-005-2006 | 航空航天系列.通用單股和多股電纜.-55℃～260℃工作溫度.第005部分:CO2激光可打印屏蔽和鎧裝電纜.產品標準 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 005: Screened (spiral) and jacketed, CO laser printable - Product standard |
| BS EN 2714-006-2006 | 航空航天系列.一般用途的單股和多股電纜.工作溫度為-55℃到260℃.屏蔽的(辮成麻花狀的)和置于殼內的CO2可激 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 006: Screened (braided) and jacketed, CO laser printable - Product standard |
| BS EN 2714-007-2005 | 航空航天系列.一般用途單芯和多芯電纜.工作溫度-55℃～260℃.第007部分:屏蔽的(螺旋式)、加護套和可紫外線 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 007: Screened (spiral) and jacketed, UV laser printable — Product standard |
| BS EN 2714-008-2006 | 航空航天系列.通用單股和多股電纜.-55℃～200℃工作溫度.第008部分:UV激光打印的屏蔽和鎧裝電纜.產品標準 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 008: Screened (braided) and jacketed, UV laser printable - Product standard |
| BS EN 2714-010-2006 | 航空航天系列.通用單芯和多芯電纜.-55℃～260℃工作溫度.屏蔽(編制的)、帶外套的YAG X3可激光印字.產品標準 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Screened (braided) and jacketed, YAG X3 laser Printable - Product standard |
| BS EN 2714-011-2005 | 航空航天系列.單芯和多芯電纜的一般用途.操作溫度在-55 °C 和260 °C之間.DM族、屏蔽式（螺旋式）和有護套 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 011: DM family, screened (spiral) and jacketed, UV laser printable — Product standard |
| BS EN 2714-012-2005 | 航空航天系列.單芯和多芯電纜的一般用途.操作溫度在-55 °C 和260 °C之間.DM族、屏蔽式（麻花型）和有護套 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 012: DM family, screened (braided) and jacketed, UV laser printable — Product standard |
| BS EN 2714-013-2005 | 航空航天系列.單芯和多芯電纜的一般用途.操作溫度在-55 °C 和260 °C之間.DM族、屏蔽式（螺旋式）和有護套 | Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 013: DR family, screened (spiral) and jacketed, UV laser printable — Product standard |
| BS EN 2731-2005 | 航空航天系列.鎂合金鋼MG-C46001 - T6.砂型鑄造 | Aerospace series - Magnesium alloy MG-C46001 - T6 - Sand casting |
| BS EN 2743-2002 | 航空航天系列.纖維增強的塑料.未老化材料測試前狀態調節的標準程序 | Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials |
| BS EN 2754-2006 | 航空航天系列.沉頭不固定雙耳自鎖防松螺母.分類:1100 MPa/235℃ | Nuts, anchor, self locking, two lug, floating with counterbore - Classification: 1100 MPa/235 °C |
| BS EN 2803-2005 | 航空航天系列.鋁合金AL-P7475-T761.覆層薄板和帶材.1.0 mm≤a≤6 mm | Aerospace series - Aluminium alloy AL-P7475-T761 - Clad sheet and strip - 1,0 mm a 6 mm |
| BS EN 2809-2001 | 航空航天系列.鍍銀的耐熱鋼制公稱對邊底高度的開槽/槽頂六角螺母.分級.900MPa(室溫)/650℃ | Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, silver plated - Classification - 900 MPa (at ambient temperature)/650 °C |
| BS EN 2810-2001 | 航空航天系列.鈍化處理的耐熱鋼制標準對邊低高度的開槽/槽頂六角螺母.等級:900MPa(室溫)/650℃ | Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature)/650 °C |
| BS EN 2821-2007 | 航空航天系列.FE-PM1802(X5CrNiCu15-5)型鋼.自耗電極再熔煉.固溶處理和沉淀處理.加工棒材.a≤200mm或D≤200 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D 200 mm - Rm 1310 MPa |
| BS EN 2859-2006 | 航空航天系列.鍍鎘合金鋼短螺紋緊公差標準螺桿標準六角頭螺栓.等級:1100MPa(室溫)/235℃ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature) / 235 °C |
| BS EN 2881-2006 | 航空航天系列.耐蝕鋼制鈍化MoS2潤滑雙耳游動沉孔密封耐燃料性自鎖托板螺母.等級:900MPa(室溫)/120℃ | Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 120 °C |
| BS EN 2882-2006 | 航空航天系列.MoS2潤滑的鎘厚板鋼制沉頭自鎖六角螺母和附屬墊圈.等級1100 MPa (環境溫度)235℃ | Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature) / 235℃ |
| BS EN 2947-2006 | 航空航天系列.FE-PA3004(X10CrNi18-09)型鋼.空氣熔煉.非熱處理.冷拉制鋼絲.a或D≤2.3mm | Aerospace series. Steel FE-PA3004 (X10CrNi18-09). Air melted. Non heat treated. Cold drawn wire. a or D≤2,3 mm |
| BS EN 2995-001-2006 | 航空航天系列.額定電流1A～25A溫度補償單極斷路器.第001部分:技術規范 | Aerospace series — Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A — Part 001: Technical specification |
| BS EN 2995-004-2006 | 航空航天系列.溫度補償額定電流1A～25A單極斷路器.第004部分:信號連接器產品標準 | Aerospace series — Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A — Part 004: With signal contact — Product standard |
| BS EN 2995-005-2006 | 航空航天系列.溫度補償額定電流1A～25A單極斷路器.帶偏振信號連接器.產品標準 | Aerospace series — Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A — Part 005: With polarized signal contact — Product standard |
| BS EN 2996-001-2006 | 航空航天系列.溫度補償額定電流1A～25A三極斷路器.第001部分:技術規范 | Aerospace series — Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A — Part 001: Technical specification |
| BS EN 2996-004-2006 | 航空航天系列. 額定電流1A～25A溫度補償三極斷路器.第004部分:信號連接.產品標準 | Aerospace series — Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A — Part 004: With signal contact — Product standard |
| BS EN 2996-005-2006 | 航空航天系列.額定電流20A～50A的三極溫度補償斷路器.第005部分:帶偏振信號連接.產品標準 | Aerospace series — Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A — Part 005: With polarized signal contact — Product standard |
| BS EN 2997-001-2006 | 航空航天系列.連續工作溫度為-65℃到175℃、持續到200℃、極端溫度為260℃時耐火或不耐火的由螺紋環連接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 001: Technical specification |
| BS EN 2997-002-2006 | 航空航天系列.連續工作溫度為-65℃到175℃、持續到200℃、極端溫度為260℃時耐火或不耐火的由螺紋環連接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 002: Specification of performance and contact arrangements |
| BS EN 2997-003-2006 | 航空航天系列.連續工作溫度為-65℃到175℃、持續到200℃、極端溫度為260℃時耐火或不耐火的由螺紋環連接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 003: Square flange receptacle - Product standard |
| BS EN 2997-004-2006 | 航空航天系列.連續工作溫度為-65℃到175℃、持續到200℃、極端溫度為260℃時耐火或不耐火的由螺紋環連接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 004: Jam-nut mounted receptacle - Product standard |
| BS EN 2997-005-2006 | 航空航天系列.連續工作溫度為-65℃到175℃、持續到200℃、極端溫度為260℃時耐火或不耐火的由螺紋環連接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 005: Hermetic square flange receptacle - Product standard |
| BS EN 2997-006-2006 | 航空航天系列.連續工作溫度為-65℃到175℃、持續到200℃、極端溫度為260℃時耐火或不耐火的由螺紋環連接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 006: Hermetic jam-nut mounted receptacle - Product standard |
| BS EN 2997-007-2006 | 航空航天系列.連續工作溫度為-65℃到175℃、持續到200℃、極端溫度為260℃時耐火或不耐火的由螺紋環連接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 007: Hermetic receptacle with round flange attached by welding or brazing - Product standard |
| BS EN 2997-008-2006 | 航空航天系列.連續工作溫度為-65℃到175℃、持續到200℃、極端溫度為260℃時耐火或不耐火的由螺紋環連接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 008: Plug - Product standard |
| BS EN 2997-009-2006 | 航空航天系列.連續工作溫度為-65℃到175℃、持續到200℃、極端溫度為260℃時耐火或不耐火的由螺紋環連接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 009: Protective cover for receptacle - Product standard |
| BS EN 2997-010-2006 | 航空航天系列.連續工作溫度為-65℃到175℃、持續到200℃、極端溫度為260℃時耐火或不耐火的由螺紋環連接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 010: Protective cover for plug - Product standard |
| BS EN 2997-011-2006 | 航空航天系列.連續工作溫度為-65℃到175℃、持續到200℃、極端溫度為260℃時耐火或不耐火的由螺紋環連接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 011: Dummy receptacle - Product standard |
| BS EN 3005-2005 | 航空航天系列.自鎖緊、MJ螺紋、NI-PH1302耐熱鎳基合金(沃斯帕洛尹合金)制鍍銀或不鍍銀螺母.等級:1210MPa ( | Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoated - Classification: 1210 MPa (at ambient temperature) / 730 °C - Technical specification |
| BS EN 3014-2001 | 航空航天系列.FE-PA2601(A286)耐熱鋼制鋸齒形自鎖帶柄螺母.等級:1100MPa(室溫)/650℃ | Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) - Classification: 1100 MPa (at ambient temperature)/650 °C |
| BS EN 3015-2001 | 航空航天系列.鍍銀的FE-PA2601(A286)耐熱鋼制鋸齒形自鎖緊帶柄螺母.等級:1100MPa(室溫)/650℃ | Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 °C |
| BS EN 3059-2007 | 航空航天系列.飛機機架轉動軸承.鋼中帶法蘭定位蓋的機架用鍍鎘剛性單列滾珠軸承.尺寸和負荷 | Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel with flanged alignment housing, cadmium plated - Dimensions and loads |
| BS EN 3060-2007 | 航空航天系列.飛機機架轉動軸承.鎘板鋼中帶鎘板法蘭定位蓋的機架用剛性單列滾珠軸承.尺寸和負荷 | Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated, with flanged alignment housing, cadmium plated - Dimensions and loads |
| BS EN 3061-2007 | 航空航天系列.飛機機架轉動軸承.耐腐蝕鋼中帶法蘭定位蓋的剛性單列滾珠軸承.尺寸和負荷 | Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel, with flanged alignment housing - Dimensions and loads |
| BS EN 3081-2001 | 航空航天系列.鈦合金管連接件8°30'.帶動梁密封端頭的修理用焊接箍 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Ferrules welded, with dynamic beam seal end, for repair |
| BS EN 3082-2001 | 航空航天系列.鈦合金管連接件8°30'.修理用悶頭焊接活接頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead welded, for repair |
| BS EN 3083-2001 | 航空航天系列.鈦合金管連接件8°30'.修理用悶頭長焊接端頭活接頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead, long welded end, for repair |
| BS EN 3084-2001 | 航空航天系列.鈦合金管連接件8°30'.修理用焊接端頭螺紋活接頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, welded end threaded for repair |
| BS EN 3114-001-2006 | 航空航天系列.試驗方法.(α+β)鈦合金鍛制品的微觀結構.第001部分:一般要求 | Aerospace series - Test method - Microstructure of (α + β) titanium alloy wrought products - Part 001: General requirements |
| BS EN 3114-002-2007 | 航空航天系列.試驗方法.鈦合金鍛制品微觀結構(α+ β).棒材、型材、鍛坯和鍛件微觀結構 | Aerospace series - Test method - Microstructure of ( + ) titanium alloy wrought products - Microstructure of bars, sections, forging stock and forgings |
| BS EN 3114-003-2006 | 航空航天系列.試驗方法.(α+β)鈦合金鍛制品的微觀結構.第003部分:板材的微觀結構 | Aerospace series - Test method - Microstructure of (α + β) titanium alloy wrought products - Part 003: Microstructure of plate |
| BS EN 3114-004-2006 | 航空航天系列.試驗方法.(α+β)鈦合金鍛制品的微觀結構.第004部分:超塑性成型薄板微觀結構 | Aerospace series - Test method - Microstructure of (α + β) titanium alloy wrought products - Part 004: Microstructure of sheet for superplastic forming |
| BS EN 3138-2001 | 航空航天系列.基于英制系列的鈍化處理的FE-PA2601耐蝕鋼制圓頂形100度埋頭標準頭實心鉚釘 | Aerospace series - Rivets, solid 100 ° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series |
| BS EN 3139-2001 | 航空航天系列.基于英制系列的鈍化處理的FE-PA11耐蝕鋼制100度埋頭標準頭實心鉚釘 | Aerospace series - Rivets, solid, 100 ° countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series |
| BS EN 3140-2001 | 航空航天系列.基于英制系列的鈍化處理的FE-PA2601耐蝕鋼制100度埋頭標準頭實心鉚釘 | Aerospace series - Rivets, solid, 100 ° countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series |
| BS EN 3146-2001 | 航空航天系列.熱軋鋼制圓形棒材.緊公差.直徑6mm 250mm.尺寸 | Aerospace series - Round bars, hot rolled in steel - Close tolerances - Diameter 6mm D 250mm - Dimensions |
| BS EN 3152-2005 | 航空航天系列.自鎖緊、MJ螺紋、FE-PA2601(A286)耐熱鋼制鍍銀或不鍍銀螺母.分類:1100MPa (環境溫度下)/425 | Aerospace series - Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated or uncoated - Classification: 1100 MPa (at ambient temperature)/425 °C - Technical specification |
| BS EN 3155-002-2006 | 航空航天系列.接觸部件用電接觸器.第002部分:電接觸器的列表和應用 | Aerospace series - Electrical contacts used in elements of connection - Part 002: List and utilization of contacts |
| BS EN 3155-003-2005 | 航空航天系列.連接部件中用電連接器.第003部分: S級、壓緊、A型電連接器插座.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, female, type A, crimp, class S. Product standard |
| BS EN 3155-004-2007 | 航空航天系列.用于連接部件的電觸點.T級、卷邊、A型、陽性電觸點產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, male, type A, crimp, class T. Product standard |
| BS EN 3155-005-2006 | 航天航天系列.連接部件中用電連接器.T級、壓緊、A型電連接器插座.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard |
| BS EN 3155-008-2005 | 航空航天系列.連接部件中用電連接器.第008部分: S級、A型、壓緊、電連接器插頭.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, male, type A, crimp, class S. Product standard |
| BS EN 3155-009-2006 | 航空航天系列.用于連接部件的電接觸器.第009部分:S級、壓褶、A型電接觸器插座的產品標準 | Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S. Product standard |
| BS EN 3155-014-2006 | 航空航天系列.連接部件用電器連接器.第014部分:A型、壓接、S級插頭電連結器.產品標準 | Aerospace series — Electrical contacts used in elements of connection — Part 014: Contacts, electrical, male, type A, crimp, class S — Product standard |
| BS EN 3155-015-2006 | 航空航天系列.連接部件用電連結器.第015部分:A型、壓接、S級插座電連結器.產品標準 | Aerospace series — Electrical contacts used in elements of connection — Part 015: Contacts, electrical, female, type A, crimp, class S — Product standard |
| BS EN 3155-016-2006 | 航空航天系列.用于連接部件的電接觸器.第016部分:S級、壓褶、A型電接觸器插頭的產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 016: Contacts, electrical, male, type A, crimp, class S. Product standard |
| BS EN 3155-018-2005 | 航空航天系列.連接部件中用電連接器.第018部分: S級、壓緊、A型電連接器插頭.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 018: Contacts, electrical, male, type A, crimp, class S - Product standard |
| BS EN 3155-019-2005 | 航空航天系列.連接部件中用電連接器.第019部分: S級、壓緊、A型電連接器插座.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, female, type A, crimp, class S. Product standard |
| BS EN 3155-023-2006 | 航空航天系列.連接部件中用電連接器.第023部分: R級、壓緊、A型電連接器矩形插座.產品標準 | Electrical contacts used in elements of connection - Part 023: Contacts, electrical, rectangular, female, type A, crimp , class R. Product standard |
| BS EN 3155-024-2006 | 航空航天系列.用于連接部件的電接觸器.第024部分:S級、壓褶、D型、尺寸為8、三軸電接觸器插頭的產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 024: Contacts, electrical, triaxial, size 8, male, type D, crimp, class S. Product standard |
| BS EN 3155-025-2006 | 航空航天系列.用于連接部件的電接觸器.第025部分:S級、壓褶、D型、尺寸為8、三軸電接觸器插座的產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 025: Contacts, electrical, triaxial, size 8, female, type D, crimp, class S. Product standard |
| BS EN 3155-026-2006 | 航空航天系列.連接部件中用電連接器.第026部分:R級、壓緊、A型電連接器插頭.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 026: Contacts, electrical, male, type A, crimp, class R. Product standard |
| BS EN 3155-027-2006 | 航空航天系列.連接部件中用電連接器.第027部分:R級、壓緊、A型電連接器插座.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 027: Contacts, electrical, female, type A, crimp, class R. Product standard |
| BS EN 3155-029-2007 | 航空航天系列.用于連接部件的電觸點.R級、卷邊、D型、陰性、尺寸16、屏蔽的、同軸電觸點產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, coaxial, shielded, size 16, female , type D, crimp, class R. Product standard |
| BS EN 3155-030-2006 | 航空航天系列.部件連接用電觸點.第030部分:R級、壓接、D型、插頭、尺寸12的同軸屏蔽電觸點.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 030: Contacts, electrical, coaxial, shielded, size 12, male, type D, crimp, class R - Product standard |
| BS EN 3155-031-2006 | 航空航天系列.部件連接用電觸點.第031部分:R級、壓接、D型、插座、尺寸12的同軸屏蔽電觸點.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 031: Contacts, electrical, coaxial, shielded, size 12, female, type D, crimp, class R - Product standard |
| BS EN 3155-035-2006 | 航空航天系列.部件連接用電觸點.第035部分:R級、壓接、D型、插座、尺寸08、三軸電接點.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 035: Contacts, electrical, triaxial, size 08, female, type D, crimp, class R - Product standard |
| BS EN 3155-039-2007 | 航空航天系列.用于連接部件的電觸點.R級、焊接、D型、陰性、尺寸16、同軸電觸點產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, coaxial, size 16, female, type D, solder, class R. Product standard |
| BS EN 3155-040-2007 | 航空航天系列.用于連接部件的電觸點.R級、焊接、D型、陽性、尺寸12、同軸電觸點產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, coaxial, size 12, male, type D, solder, class R. Product standard |
| BS EN 3155-041-2007 | 航空航天系列.用于連接部件的電觸點.R級、焊接、D型、陰性、尺寸12、同軸電觸點產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, coaxial, size 12, female, type D, solder, class R. Product standard |
| BS EN 3155-042-2006 | 航空航天系列.連接部件中用電連接器.第042部分:P級、焊接、D型、042插頭、尺寸08mm三軸電連接器.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 042: Contacts, electrical, triaxial, size 08, male 042, type D, solder, class P - Product standard |
| BS EN 3155-043-2006 | 航空航天系列.連接部件中用電連接器.第043部分:P級、焊接、D型、043插座、尺寸08mm三軸電連接器.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 043: Contacts, electrical, triaxial, size 08, female 043, type D, solder, class P - Product standard |
| BS EN 3155-045-2006 | 航空航天系列.連接部件中用電連接器.第045部分:T級、雙壓緊、A型插座電連接器.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 045: Contacts, electrical, female, type A, double crimping, class T - Product standard |
| BS EN 3155-047-2007 | 航空航天系列.用于連接部件的電觸點.S級、雙卷邊、A型、陰性電觸點產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, female, type A, double crimping, class S. Product standard |
| BS EN 3155-052-2007 | 航空航天系列.連接部件用電觸點.S級、卷邊、A型、陽性052電觸點產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, male 052, type A, crimp, class S. Product standard |
| BS EN 3155-053-2007 | 航空航天系列.用于連接部件的電觸點.S級、卷邊、A型、陰性053電觸點產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, female 053, type A, crimp, class S. Product standard |
| BS EN 3155-054-2006 | 航空航天系列.用于連接部件的電接觸器.T級、壓褶、C型、NiAl熱電偶電接觸器插頭的產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, male thermocouple NiAl, type C, crimp, class T. Product standard |
| BS EN 3155-055-2006 | 航空航天系列.部件連接用電觸點.T級、壓接、C型、NiAl熱電偶插座電觸點.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, female, thermocouple NiAl, type C, crimp, class T. Product standard |
| BS EN 3155-056-2006 | 航空航天系列.用于連接部件的電接觸器.T級、壓褶、C型、NiCr熱電偶電接觸器插頭的產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, male, thermocouple NiCr, type C, crimp, class T. Product standard |
| BS EN 3155-057-2006 | 航空航天系列.部件連接用電觸點.T級、壓接、C型、NiCr熱電偶插座電觸點.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, female, thermocouple NiCr, type C, crimp, class T. Product standard |
| BS EN 3155-058-2006 | 航空航天系列.用于連接部件的電接觸器.R級、焊接、D型、尺寸為16、同軸電接觸器插頭的產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, coaxial, size 16, male, type D, solder, class R. Product standard |
| BS EN 3155-059-2006 | 航空航天系列.部件連接用電觸點.第059部分:R級、釬焊、D型、插座、尺寸16的同軸電觸點.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Part 059: Contacts, electrical, coaxial, size 16, female, type D, solder, class R - Product standard |
| BS EN 3155-060-2006 | 航空航天系列.部件連接用電觸點.R級、釬焊、D型、插頭、尺寸12、屏蔽、同軸、電觸點.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, coaxial, shielded, size 12, male, type D, solder, class R. Product standard |
| BS EN 3155-061-2006 | 航空航天系列.部件連接用電觸點.R級、釬焊、D型、插座、尺寸12、屏蔽、同軸、電觸點.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, coaxial, shielded, size 12, female , type D, solder, class R. Product standard |
| BS EN 3155-065-2006 | 航空航天系列.部件連接用電觸點.尺寸8、S級、壓接、A型插頭電觸點.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, male, type A, crimp, class S, size 8. Product standard |
| BS EN 3155-066-2006 | 航空航天系列.部件連接用電觸點.尺寸8、S級、壓接、A型、插座電觸點.產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, female, type A, crimp, class S, size 8. Product standard |
| BS EN 3155-44-2007 | 航空航天系列.用于連接部件的電觸點.T級、雙卷邊、A型、陽性044電觸點產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, male 044, type A, double crimping, class T. Product standard |
| BS EN 3155-46-2007 | 航空航天系列.用于連接部件的電觸點.S級、雙卷邊、A型、陽性電觸點產品標準 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, male, type A, double crimping, class S. Product Standard |
| BS EN 3230-2001 | 航空航天系列.鍍鎘的鋼制標準對邊低高度的開槽/槽頂六角螺母.等級:900MPa(室溫)/235℃ | Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated - Classificaiton: 900 MPa (at ambient temperature)/235 °C |
| BS EN 3243-2001 | 航空航天系列.鈦合金8°30'管連接件.帶動力橫梁密封端頭的焊接環箍 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Ferrule, welded, with dynamic beam seal end |
| BS EN 3244-2001 | 航空航天系列.鈦合金8°30’管連接件.雙端頭的活接頭 | Aerospace Series - Pipe coupling 8 °30' in titanium alloy - Unions, double ended |
| BS EN 3245-2001 | 航空航天系列.鈦合金8°30'管連接件.變徑活接頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, reducer |
| BS EN 3246-2001 | 航空航天系列.鈦合金8°30' 管連接件.、悶頭活接頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead |
| BS EN 3247-2001 | 航空航天系列.鈦合金8°30'管連接件.悶頭焊接端活接頭、 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead welded end |
| BS EN 3248-2001 | 航空航天系列.鈦合金管連接件8°30’.帶鎖緊裝置的縮徑管端的轉接頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Adaptors, reduced pipe end, with lockring |
| BS EN 3264-2001 | 航空航天系列.鈦合金8°30管連接件’.止推金屬絲螺母 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Thrust wire nut |
| BS EN 3266-2001 | 航空航天系列.鈦合金管連接件.悶頭螺母 | Aerospace series - Pipe coupling in titanium alloy - Bulkhead nut |
| BS EN 3267-2001 | 航空航天系列.鈦合金悶頭墊圈 | Aerospace series - Washers, bulkhead in titanium alloy |
| BS EN 3268-2001 | 航空航天系列.鈦合金8°30'管連接件.壓力管塞 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Pressure plug |
| BS EN 3269-2001 | 航空航天系列.鈦合金管連接件8°30'.帶動梁密封端頭的暗箍 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Ferrules, blind, with dynamic beam seal end |
| BS EN 3270-2001 | 航空航天系列.8°30'鈦合金管連接件.帶鎖緊環的截止管塞 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Blanking plug with lockring |
| BS EN 3272-2001 | 航空航天系列.8°30'鈦合金管連接件.動態橫梁密封端頭的焊接箍.幾何配置 | Aerospace series - Pipe coupling 8 °30' - Dynamic beam seal end for ferrule, welded - Geometric configuration |
| BS EN 3273-2001 | 航空航天系列.鈦合金管連接件8°30'.彎頭、十字管和三通管用動梁密封端頭.幾何配置 | Aerospace series - Pipe coupling 8 °30' - Dynamic beam seal end for elbows, tees and crosses - Geometric configuration |
| BS EN 3274-2001 | 航空航天系列.管連接件8°30'.螺紋.幾何配置 | Aerospace series - Pipe coupling 8 °30' - Thread - Geometric configurations |
| BS EN 3275-2002 | 航空航天系列.高達28000kPa的管連接 8 0'.動態橫梁密封.米制系列.技術規范 | Aerospace series - Pipe coupling 8 °30' up to 28000 kPa - Dynamic beam seal - Metric series - Technical specification |
| BS EN 3299-2007 | 航空航天系列.鍍銀、右或左旋MJ螺紋、自鎖緊、FE-PA2601(A286)耐熱鋼軸螺母和螺環.技術規范 | Aerospace series - Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated - Technical specification |
| BS EN 3332-2005 | 航空航天系列.AL-P7475-T762型鋁合金.覆層鋁合金薄板材和帶材.1.0mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P7475-T762 - Clad sheet and strip - 1,0 mm a 6 mm |
| BS EN 3338-2005 | 航空航天系列.AL-P7050型鋁合金.T74511.擠壓棒材和型材.a或D<= 150 mm周邊粗粒控制 | Aerospace series - Aluminim alloy AL-P7050 - T74511 - Extruded bar and section - a or D <= 150 mm with peripheral coarse grain control |
| BS EN 3339-2006 | 航空航天系列.AL-P7010-T76型鋁合金.壓模鍛件.a ≤200mm | Aerospace series — Aluminium alloy AL-P7010- — T76 — Die forgings — a u 200 mm |
| BS EN 3342-2005 | 航空航天系列.AL-P6061型鋁合金.T4或T42.拉拔或擠壓棒材和型材.a或D <= 150 mm | Aerospace series - Aluminim alloy AL-P6061 - T4 or T42 - Drawn or extruded bar and section - a or D <= 150 mm |
| BS EN 3344-2005 | 航空航天系列.AL-P7050型鋁合金.T76511.擠壓棒材和型材.a或D<= 150 mm周邊粗粒控制 | Aerospace series - Aluminim alloy AL-P7050 - T76511 - Extruded bar and section - a or D <= 150 mm with peripheral coarse grain control |
| BS EN 3347-2005 | 航空航天系列.鋁合金AL-P2024.T8511.擠壓棒材和型材.a/D≤150mm周邊粗粒控制 | Aerospace series - Aluminim alloy AL-P2024 - T8511 - Extruded bar and section - a or D <= 150 mm with peripheral coarse grain control |
| BS EN 3372-001-2007 | 航空航天系列.工作溫度在-65°C到175°C或200°C連續溫度下、帶卡口連接的、防碰擦、中和高接觸密度、圓形 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Technical specification |
| BS EN 3372-002-2007 | 航空航天系列.工作溫度在-65°C到175°C或200°C連續溫度下、帶卡口連接的、防碰擦、中和高接觸密度、圓形 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Specification of performance and contact arrangement |
| BS EN 3372-003-2007 | 航空航天系列.工作溫度在-65°C到175°C或200°C連續溫度下、帶卡口連接的、防碰擦、中和高接觸密度、圓形 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Square flange receptacle - Product standard |
| BS EN 3372-005-2007 | 航空航天系列.工作溫度在-65°C到175°C或200°C連續溫度下、帶卡口連接的、防碰擦、中和高接觸密度、圓形 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Receptacle, hermetic, round flange, solder mounting - Product standard |
| BS EN 3372-006-2007 | 航空航天系列.工作溫度在-65°C到175°C或200°C連續溫度下、帶卡口連接的、防碰擦、中和高接觸密度、圓形 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Protective cover for receptacle - Product standard |
| BS EN 3372-007-2007 | 航空航天系列.工作溫度在-65°C到175°C或200°C連續溫度下、帶卡口連接的、防碰擦、中和高接觸密度、圓形 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Protective cover for plug - Product standard |
| BS EN 3372-008-2007 | 航空航天系列.工作溫度在-65°C到175°C或200°C連續溫度下、帶卡口連接的、防碰擦、中和高接觸密度、圓形 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Free plug with grounding spring - Product standard |
| BS EN 3372-009-2007 | 航空航天系列.工作溫度在-65°C到175°C或200°C連續溫度下、帶卡口連接的、防碰擦、中和高接觸密度、圓形 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Receptacle, jam nut mounting - Product standard |
| BS EN 3372-011-2007 | 航空航天系列.工作溫度在-65°C到175°C或200°C連續溫度下、帶卡口連接的、防碰擦、中和高接觸密度、圓形 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Dummy receptacle - Product standard |
| BS EN 3373-012-2005 | 航空航天系列.電導體壓接用終端盒和內嵌式接頭.第012部分:溫度＜150℃銅導體壓接用絕緣和密封的內嵌式接頭. | Terminal lugs and in-line splices for crimping on electric conductors - Part 012: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 150 ℃ - Product standard |
| BS EN 3373-013-2005 | 航空航天系列.電導體壓接用終端盒和內嵌式接頭.第013部分:溫度＜260℃銅導體壓接用絕緣和防潮的內嵌式接頭. | Terminal lugs and in-line splices for crimping on electric conductors - Part 013: In-line splices, insulated and moisture resistant, for crimping on copper conductors, temperature up to 260 ℃ - Product standard |
| BS EN 3375-001-2007 | 航空航天系列.數字?jǐn)?shù)據傳送用電纜.技術規范 | Aerospace series - Cable, electrical, for digital data transmission - Technical specification |
| BS EN 3375-006-2006 | 航空航天系列.數字?jǐn)?shù)據傳輸電纜.第006部分:XM型78 Ohms單股電纜.產品標準 | Aerospace series — Cable, electrical, for digital datatransmission — Part 006: Single braid — 78 Ohms — Type XM — Product standard |
| BS EN 3375-007-2006 | 航空航天系列.數字?jǐn)?shù)據傳輸電纜.第007部分:WW型77 Ohms雙股電纜.產品標準 | Aerospace series — Cable, electrical, for digital datatransmission — Part 007: Double braid — 77 Ohms — Type WW — Product standard |
| BS EN 3444-2006 | 航空航天系列.鈍化鎳合金制耐熱、標準柄、緊公差中長螺紋大直徑十二沉頭螺栓.等級:1250MPa(室溫)/650℃ | Aerospace series - Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1250 MPa (at ambient temperature) / 650 ℃ |
| BS EN 3474-2005 | 航空航天系列.AL-P2024-T81型鋁合金.薄板材和帶材.0.25 mm <= a <= 6 mm | Aerospace series - Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm <= a <= 6 mm |
| BS EN 3475-100-2002 | 航空航天系列.飛行器用電纜.試驗方法.總則 | Aerospace series - Cables, electrical, aircraft use - Test methods - General |
| BS EN 3475-201-2002 | 航空航天系列.飛行器用電纜.試驗方法.目視檢查 | Aerospace series - Cables, electrical, aircraft use - Test methods - Visual examination |
| BS EN 3475-202-2002 | 航空航天系列.飛行器用電纜.試驗方法.質量 | Aerospace series - Cables, electrical, aircraft use - Test methods - Mass |
| BS EN 3475-301-2002 | 航空航天系列.飛行器用電纜.試驗方法.單位長度的歐姆電阻 | Aerospace series - Cables, electrical, aircraft use - Test methods - Ohmic resistance per unit length |
| BS EN 3475-302-2006 | 航空航天系列.飛行器用電纜.試驗方法.電壓保護試驗 | Aerospace series - Cable, electrical, aircraft use - Test methods - Part 302: Voltage proof test |
| BS EN 3475-303-2002 | 航空航天系列.飛行器用電纜.試驗方法.絕緣電阻 | Aerospace series - Cables, electrical, aircraft use - Test methods - Insulation resistance |
| BS EN 3475-304-2002 | 航空航天系列.飛行器用電纜.試驗方法.表面電阻 | Aerospace series - Cables, electrical, aircraft use - Test methods - Surface resistance |
| BS EN 3475-305-2002 | 航空航天系列.飛行器用電纜.試驗方法.過載電阻 | Aerospace series - Cables, electrical, aircraft use - Test methods - Overload resistance |
| BS EN 3475-306-2005 | 航空航天系列.航空器用電纜.試驗方法.第306部分:導線連貫性 | Cables, electrical, aircraft use - Test methods - Part 306: Continuity of conductors |
| BS EN 3475-307-2005 | 航空航天系列.航空器用電纜.試驗方法.第307部分:電暈熄滅電壓 | Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage |
| BS EN 3475-401-2002 | 航空航天系列.飛行器用電纜.試驗方法.加速老化試驗 | Aerospace series - Cables, electrical, aircraft use - Test methods - Accelerated ageing |
| BS EN 3475-402-2002 | 航空航天系列.飛行器用電纜.試驗方法.收縮性和脫層 | Aerospace series - Cables, electrical, aircraft use - Test methods - Shrinkage and delamination |
| BS EN 3475-403-2002 | 航空航天系列.飛行器用電纜.試驗方法.脫層和阻塞 | Aerospace series - Cables, electrical, aircraft use - Test methods - Delamination and blocking |
| BS EN 3475-404-2002 | 航空航天系列.飛行器用電纜.試驗方法.熱沖擊 | Aerospace series - Cables, electrical, aircraft use - Test methods - Thermal shock |
| BS EN 3475-405-2002 | 航空航天系列.飛行器用電纜.試驗方法.環境溫度下的彎曲 | Aerospace series - Cables, electrical, aircraft use - Test methods - Bending at ambient temperature |
| BS EN 3475-406-2002 | 航空航天系列.飛行器用電纜.試驗方法.冷彎曲試驗 | Aerospace series - Cables, electrical, aircraft use - Test methods - Cold bend test |
| BS EN 3475-408-2005 | 航空航天系列.飛機用電纜.試驗方法.耐燃性 | Cables, electrical, aircraft use — Test methods — Part 408: Fire resistance |
| BS EN 3475-409-2002 | 航空航天系列.飛行器用電纜.試驗方法.真空老化試驗 | Aerospace series - Cables, electrical, aircraft use - Test methods - Air-excluded ageing |
| BS EN 3475-410-2002 | 航空航天系列.飛行器用電纜.試驗方法.耐熱性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Thermal endurance |
| BS EN 3475-411-2005 | 航空航天系列.飛行器用電纜.試驗方法.耐液體 | Cables, electrical, aircraft use — Test methods — Part 411: Resistance to fluids |
| BS EN 3475-412-2002 | 航空航天系列.飛行器用電纜.試驗方法.耐濕度 | Aerospace series - Cables, electrical, aircraft use - Test methods - Humidity resistance |
| BS EN 3475-413-2002 | 航空航天系列.飛行器用電纜.試驗方法.反復纏繞試驗 | Aerospace series - Cables, electrical, aircraft use - Test methods - Wrap back test |
| BS EN 3475-414-2005 | 航空航天系列.飛行器用電纜.試驗方法.差示掃描量熱儀(DSC 試驗) | Cables, electrical, aircraft use — Test methods — Part 414: Differential scanning calorimeter (DSC test) |
| BS EN 3475-415-2005 | 航空航天系列.航空器用電纜.試驗方法.第415部分:溫度的快速改變 | Cables, electrical, aircraft use - Test methods - Part 415: Rapid change of temperature |
| BS EN 3475-416-2005 | 航空航天系列.航空器用電纜.試驗方法.第416部分:熱穩定性 | Cables, electrical, aircraft use - Test methods - Part 416: Thermal stability |
| BS EN 3475-501-2006 | 航空航天系列.飛行器用電纜.試驗方法.動態切口 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamic cut-through |
| BS EN 3475-502-2002 | 航空航天系列.飛行器用電纜.試驗方法.切口延伸 | Aerospace series - Cables, electrical, aircraft use - Test methods - Notch propagation |
| BS EN 3475-503-2002 | 航空航天系列.飛行器用電纜.試驗方法.擦傷腐蝕 | Aerospace series - Cables, electrical, aircraft use - Test methods - Scrape abrasion |
| BS EN 3475-504-2002 | 航空航天系列.飛行器用電纜.試驗方法.扭力 | Aerospace series - Cables, electrical, aircraft use - Test methods - Torsion |
| BS EN 3475-505-2002 | 航空航天系列.飛行器用電纜.試驗方法.導線和絞線的抗拉試驗 | Aerospace series - Cables, electrical, aircraft use - Test methods - Tensile tests on conductors and strands |
| BS EN 3475-509-2002 | 航空航天系列.飛行器用電纜.試驗方法.可焊接性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Solderability |
| BS EN 3475-510-2002 | 航空航天系列.飛行器用電纜.試驗方法.擠壓絕緣護套和套管材料的抗拉強度和延伸率 | Aerospace series - Cables, electrical, aircraft use - Test methods - Tensile strength and elongation of extruded insulation, sheath and jacket material |
| BS EN 3475-511-2002 | 航空航天系列.飛行器用電纜.試驗方法.電纜對電纜的磨耗 | Aerospace series - Cables, electrical, aircraft use - Test methods - Cable-to-cable abrasion |
| BS EN 3475-512-2002 | 航空航天系列.飛行器用電纜.試驗方法.耐彎度 | Aerospace series - Cables, electrical, aircraft use - Test methods - Flexure endurance |
| BS EN 3475-513-2005 | 航空航天系列.航空器用電纜.試驗方法.第513部分:耐變形(用塑料電纜扎帶安裝) | Cables, electrical, aircraft use - Test methods - Part 513: Deformation resistance (Installation with plastic cable ties) |
| BS EN 3475-603-2002 | 航空航天系列.飛行器用電纜.試驗方法.耐濕弧光痕跡性能 | Aerospace series - Cables, electrical, aircraft use - Test methods - Resistance to wet arc tracking |
| BS EN 3475-604-2002 | 航空航天系列.飛行器用電纜.試驗方法.耐干弧光的傳播性能 | Aerospace series - Cables, electrical, aircraft use - Test methods - Resistance to dry arc propagation |
| BS EN 3475-605-2002 | 航空航天系列.飛行器用電纜.試驗方法.濕氣短路試驗 | Aerospace series - Cables, electrical, aircraft use - Test methods - Wet short circuit test |
| BS EN 3475-701-2002 | 航空航天系列.飛行器用電纜.試驗方法.絕緣材料與導體的脫層和附著力 | Aerospace series - Cables, electrical, aircraft use - Test methods - Strippability and adherence of insulation to the conductor |
| BS EN 3475-702-2002 | 航空航天系列.飛行器用電纜.試驗方法.屏蔽后推移能力 | Aerospace series - Cables, electrical, aircraft use - Test methods - Screen pushback capability |
| BS EN 3475-703-2002 | 航空航天系列.飛行器用電纜.試驗方法.制造商標記的耐久性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Permanence of manufacturer's marking |
| BS EN 3475-704-2002 | 航空航天系列.飛行器用電纜.試驗方法.撓性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Flexibility |
| BS EN 3475-705-2005 | 航空系航天列.飛機用電纜.試驗方法.對比度測量 | Cables, electrical, aircraft use — Test methods — Part 705: Contrast measurement |
| BS EN 3475-706-2005 | 航空航天系列.飛行器用電纜.試驗方法.激光可標記性 | Cables, electrical, aircraft use — Test methods — Part 706: Laser markability |
| BS EN 3475-801-2002 | 航空航天系列.飛行器用電纜.試驗方法.單位長度導體的電容量 | Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance per unit length |
| BS EN 3475-802-2002 | 航空航天系列.飛行器用電纜.試驗方法.不平衡導體的電容量 | Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance unbalance |
| BS EN 3475-803-2002 | 航空航天系列.飛行器用電纜.試驗方法.導體的電容量的變化 | Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance variation |
| BS EN 3475-804-2002 | 航空航天系列.飛行器用電纜.試驗方法.傳播速度 | Aerospace series - Cables, electrical, aircraft use - Test methods - Velocity of propagation |
| BS EN 3475-805-2002 | 航空航天系列.飛行器用電纜.試驗方法.特性阻抗 | Aerospace series - Cables, electrical, aircraft use - Test methods - Characteristic impedance |
| BS EN 3475-806-2002 | 航空航天系列.飛行器用電纜.試驗方法.衰減性 | Aerospace series - Cables, electrical, aircraft use - Test methods - Attenuation |
| BS EN 3475-807-2002 | 航空航天系列.飛行器用電纜.試驗方法.轉移阻抗 | Aerospace series - Cables, electrical, aircraft use - Test methods - Transfer impedance |
| BS EN 3475-808-2002 | 航空航天系列.飛行器用電纜.試驗方法.交叉談話 | Aerospace series - Cables, electrical, aircraft use - Test methods - Cross-talk |
| BS EN 3476-2006 | 航空航天系列.FE-PL1501(30CrMo12)型鋼.空氣冶煉.軟化的.鍛坯.a或D≤300mm | Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Softened - Forging stock - a or D u 300 mm |
| BS EN 3479-2007 | 航空航天系列.FE-PM1802(X5CrNiCu15-5)型鋼.固溶處理和沉淀處理.厚板材.6mm≤a≤20mm.1070MPa≤Rm≤1220MPa | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Plate - 6 mm $3Q a 20 mm - 1070 MPa Rm 1220 MPa |
| BS EN 3490-2007 | 航空航天系列.FE-PM3901(X15CrNi17-3)型鋼.空氣熔煉.淬火和調質鋼.加工棒材.a≤200mm.900Mpa≤Rm≤1100Mpa | Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Bar for machining - De 200 mm - 900 MPa Rm 1100 MPa |
| BS EN 3491-2006 | 航空航天系列.FE-PM3901(X15CrNi17-3)型鋼.空氣冶煉.淬火和回火的.鍛件.De≤100mm.900MPa≤Rm≤1100MPa | Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Forgings - De u 100 mm - 900 MPa u Rm u 1 100 MPa |
| BS EN 3506-2001 | 航空航天系列.耐熱合金制成的熱軋薄板和板材.厚度2.0mm a 100mm.尺寸 | Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2,0 mm a 100 mm - Dimensions |
| BS EN 3507-2006 | 航空航天系列.FE-PL1501(30CrMo12)型鋼.空氣冶煉.淬火并回火.鍛件.De≤100mm.930MPa≤Rm≤1080MPa | Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Hardened and tempered - Forgings - De ≤100 mm - 930 MPa ≤ Rm ≤ 1 080 MPa |
| BS EN 3523-2007 | 航空航天系列.FE-PL1505(15CrMoV6)型鋼.空氣熔煉.淬火和調質鋼.加工棒材.De≤100mm.1080MPa≤Re≤1280MPa | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Bar for machining - De 100 mm - 1080 MPa Rm 1280 MPa |
| BS EN 3524-2007 | 航空航天系列.FE-PL1505(15CrMoV6)型鋼.空氣熔煉.淬火和調質鋼.薄板材和帶材.2mm≤a≤6mm.1080Mpa≤Rm≤128 | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 2 mm a 6 mm - 1080 MPa Rm 1280 MPa |
| BS EN 3525-2007 | 航空航天系列.FE-PL1505(15CrMoV6)型鋼.空氣熔煉.淬火和調質鋼.厚板材.6mm≤a≤20mm.1080MPa≤Rm≤1280MPa | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm $3Q a 20 mm - 1080 MPa Rm 1280 MPa |
| BS EN 3526-2007 | 航空航天系列.FE-PL1505(15CrMoV6)型鋼.空氣熔煉.淬火并回火.薄板材和帶材.0.5mm≤a≤6mm.980Mpa≤Rm≤1180 | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 0,5 mm a 6 mm - 980 MPa Rm 1180 MPa |
| BS EN 3527-2007 | 航空航天系列.FE-PL1504(33CrMoV12)型鋼.空氣熔煉.軟化的.鍛坯.a≤300mm或D≤300mm | Aerospace series - Steel FE-PL1504 (33CrMoV12) - Air melted - Softened - Forging stock - a or D 300 mm |
| BS EN 3531-2007 | 航空航天系列.FE-PM2701(X2NiCoMo18-8-5)型鋼.真空感應熔煉和真空電弧再熔煉.固溶處理和沉淀處理.薄板材和 | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheet and strip - a 6 mm - 1750 MPa Rm 2000 MPa |
| BS EN 3532-2007 | 航空航天系列.FE-PM2701(X2NiCoMo18-8-5)型鋼.真空感應熔煉和真空電弧再熔煉.固溶處理和沉淀處理.厚板材.6m | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plate - 6 mm $3Q a 40 mm - 1750 MPa Rm 2000 MPa |
| BS EN 3536-2006 | 航空航天系列.MoS2潤滑的耐熱鋼制自鎖緊六角螺母.分類:1100 MPa(環境溫度)/315℃ | Aerospace series - Nuts, hexagon, self-locking, in heat resisting steel, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C |
| BS EN 3545-001-2005 | 航空航天系列.工作溫度-5℃至175℃后部密封或非密封的、塑料殼體矩形連接器.技術規范 | Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures –55 ℃ to 175 ℃ — Part 001: Technical specification |
| BS EN 3545-002-2005 | 航空航天系列.工作溫度-55℃至175℃后部密封或非密封的、塑料殼體矩形連接器.性能和接觸安排的規范 | Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 ℃ to 175 ℃ — Part 002: Specification of performance and contact arrangements |
| BS EN 3545-003-2005 | 航空航天系列.工作溫度-55℃至175℃后部密封或非密封的、塑料殼體矩形連接器.插孔接點的連接器.產品標準 | Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 ℃ to 175 ℃ — Part 003: Connectors with female contacts — Product standard |
| BS EN 3545-005-2006 | 航空航天系列.工作溫度-55℃～175℃的后部密封或非密封的、塑料殼鎖定裝置矩形電連接器.第005部分:無外殼( | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 005: Male coding and attachment system for mounting on free housing (plug) - Product standard |
| BS EN 3545-006-2006 | 航空航天系列.工作溫度-55℃～175℃的后部密封或非密封的、塑料殼鎖定裝置矩形電連接器.第006部分:固定外殼 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 006: Male coding and attachment system for fitment on fixed housing (receptacle) - Product standard |
| BS EN 3545-007-2005 | 航空航天系列.工作溫度-55℃至175℃后部密封或非密封的、塑料殼體矩形連接器.產品標準 | Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 ℃ to 175 ℃ — Part 007: Cable clamp — Product standard |
| BS EN 3545-008-2006 | 航空航天系列.工作溫度為-55℃～175℃后部密封或非密封的、塑料殼鎖定裝置矩形電連接器.編碼的裝配/移除工 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °CC - Tools for assembly/removal of coding and attachment systems - Product standard |
| BS EN 3553-2005 | 航空航天系列.鋁合金AL-P2618A-T6511.擠制棒材和型材.a或D160mm | Aerospace series - Aluminium alloy AL-P2618A-T6511 - Extruded bar and section - a or D 160 mm |
| BS EN 3561-2001 | 航空航天系列.鈦合金管連接件8°30'.在管端焊接和變徑的帶動力橫梁密封端頭的環箍 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end |
| BS EN 3566-2001 | 航空航天系列.鈦合金8°30'管連接件.帶鎖緊裝置的轉接頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Adaptor with lockring |
| BS EN 3567-001-2001 | 航空航天系列.符合MIL-STD-1553B規定的多路數據總線系統中使用的串聯耦合器 | Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Technical specification |
| BS EN 3567-003-2001 | 航空航天系列.符合MIL-STD-1553B規定的多路數據總線系統中使用的串聯耦合器.單個的串聯耦合器.產品標準 | Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Single in-line couplers - Product standard |
| BS EN 3567-004-2001 | 航空航天系列.符合MIL-STD-1553B規定的多路數據總線系統中使用的串聯耦合器.復式串聯耦合器.產品標準 | Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Double in-line couplers - Product standard |
| BS EN 3638-2007 | 航空航天系列.FE-PA2601(X6NiCrTiMoV26-15)耐熱合金.自耗電極再熔煉.固溶和沉淀處理.薄板材、帶材和厚板材. | Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Consumable electrode remelted - Solution and precipitation treated - Sheet, strip and plate - 0,5 mm a 10 mm |
| BS EN 3645-003-2006 | 航空航天系列連續操作溫度175℃或 200℃、圓形防穴式、3層起動螺紋聯接電連接器.第003部分:方形法蘭安裝插 | Aerospace series — Connectors, electrical, circular, scoop-proof,triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 003: Receptacle square flange mounting — Product standard |
| BS EN 3645-004-2006 | 航空航天系列連續操作溫度175℃或 200℃、圓形防穴式、3層起動螺紋聯接電連接器.第004部分:方形法蘭密封插 | Aerospace series — Connectors, electrical, circular, scoop-proof,triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 004: Receptacle, hermetic, square flange mounting — Product standard |
| BS EN 3645-005-2006 | 航空航天系列連續操作溫度175℃或 200℃、圓形防穴式、3層起動螺紋聯接電連接器.第005部分:brasage 安裝圓 | Aerospace series — Connectors, electrical, circular, scoop-proof,triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 005: Receptacle, hermetic, round flange, brasage mounting — Product standard |
| BS EN 3645-006-2006 | 航空航天系列連續操作溫度175℃或 200℃、圓形防穴式、3層起動螺紋聯接電連接器.第006部分:插座保護蓋.產品 | Aerospace series — Connectors, electrical, circular, scoop-proof,triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 006: Protective cover for receptacle — Product standard |
| BS EN 3645-009-2006 | 航空航天系列連續操作溫度175℃或 200℃、圓形防穴式、3層起動螺紋聯接電連接器.第009部分:防松螺母安裝圓 | Aerospace series — Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 009: Receptacle, round flange, jam nut mounting — Product standard |
| BS EN 3645-010-2006 | 航空航天系列連續操作溫度175℃或 200℃、圓形防穴式、3層起動螺紋聯接電連接器.第010部分:防松螺母安裝圓 | Aerospace series — Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 010: Receptacle, hermetic, round flange, jam nut mounting — Product standard |
| BS EN 3645-011-2006 | 航空航天系列連續操作溫度175℃或 200℃、圓形防穴式、3層起動螺紋聯接電連接器.第011部分:帶接地指針釋放 | Aerospace series — Connectors, electrical, circular, scoop-proof,triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 011: Lanyard release plug with grounding fingers — Type 1 — Product standard |
| BS EN 3645-012-2006 | 航空航天系列連續操作溫度175℃或 200℃、圓形防穴式、3層起動螺紋聯接電連接器.第012部分:帶接地指針釋放 | Aerospace series — Connectors, electrical, circular, scoop-proof,triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 012: Lanyard release plug with grounding fingers — Type 2 — Product standard |
| BS EN 3645-013-2007 | 航空航天系列.連續操作溫度175℃或200℃、3層起動螺紋聯接、防碰擦、圓形電連接器.虛擬插座.產品標準 | Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Dummy receptacle - Product standard |
| BS EN 3646-003-2006 | 航空航天系列.175℃～200℃工作溫度圓形卡口耦合電器連接件.第003部分:方形法蘭安裝插座.產品標準. | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 003: Receptacle, square flange mounting - Product standard |
| BS EN 3646-004-2006 | 航空航天系列.175℃～200℃工作溫度圓形卡口耦合電連器.第004部分:鎖緊螺母安裝密封插件.產品標準 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 004: Receptacle, jam-nut mounting - Product standard |
| BS EN 3646-005-2006 | 航空航天系列.175℃～200℃工作溫度圓形卡口耦合電連接器.第005部分:方形法蘭安裝密封插座.產品標準 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 005: Receptacle, hermetic, square flange mounting - Product standard |
| BS EN 3646-006-2006 | 航空航天系列.175℃～200℃工作溫度圓形卡口耦合電器連器.第006部分:鎖緊螺母安裝密封插座.產品標準 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 006: Receptacle, hermetic jam-nut mounting - Product standard |
| BS EN 3646-007-2006 | 航空航天系列.175℃～200℃溫度工作的圓形卡口耦合電連接器.第007部分:圓形法蘭密封焊接或銅焊接的密封插座 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 007: Receptacle, hermetic, round flange, welding or brazing mounting - Product standard |
| BS EN 3646-008-2006 | 航空航天系列.175℃～200℃溫度工作的圓形卡口耦合電連接器.第008部分:插頭保護蓋.產品標準 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 008: Plug - Product standard |
| BS EN 3646-009-2006 | 航空航天系列.175℃～200℃溫度工作的圓形卡口耦合電連接器.第009部分:插接件保護蓋.產品標準 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 009: Protective cover for receptacle - Product standard |
| BS EN 3646-010-2006 | 航空航天系列.175℃～200℃工作溫度圓形卡口耦合電連接器.第010部分:插頭保護蓋.產品標準 | Aerospace series - Connectors, electrical, circular, bayonet coupling - Operating temperature 175 °C or 200 °C continuous duty - Part 010: Protective cover for plug - Product standard |
| BS EN 3646-011-2006 | 航空航天系列.175℃或200℃連續溫度工作的針狀耦合式、圓形電連接器.BS EN 3646-011.第11部分:產品標準 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Dummy receptacle - Part 011: Product standard |
| BS EN 3660-001-2006 | 航空航天系列.圓形和矩形光電連接器用電纜引出端附件.技術規范 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification |
| BS EN 3660-002-2006 | 航空航天系列.圓形和矩形光電連接器用電纜引出端附件.產品標準索引 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 002: Index of product standards |
| BS EN 3660-003-2006 | 航空航天系列.圓形和矩形光電連接器用電纜引出端附件.EN 2997和EN 4067中A型不穿孔螺母的產品標準 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 003: Grommet nut, style A for EN 2997 and EN 4067: Product standard |
| BS EN 3660-004-2006 | 航空航天系列.圓形和矩形光電連接器用電纜引出端附件.EN 2997和EN 4067中帶應變消除夾未密封筆直的A型電纜 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 004: Cable outlet, style A , straight, unsealed with clamp strain relief for EN 2997 and EN 4067: Product standard |
| BS EN 3660-005-2006 | 航空航天系列.圓形和矩形光電連接器用電纜引出端附件.EN 2997和EN 4067中帶應變消除夾未密封的A型90°電纜 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A , 90 °, unsealed with clamp strain relief for EN 2997 and EN 4067: Product standard |
| BS EN 3660-009-2007 | 航空航天系列.圓形和矩形光電連接器用電纜引出端附件.熱縮(插頭座)保護罩用密封、直的、J型電纜引出端.產品 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Cable outlet, style J , straight, sealed, for heat shrinkable boot - Product standard |
| BS EN 3661-001-2006 | 航空航天系列.額定電流20A～50A的單極溫度補償斷路器.第001部分:技術規范 | Aerospace series — Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A — Part 001: Technical specification |
| BS EN 3661-005-2006 | 航空航天系列.額定電流20A～50A的單極溫度補償斷路器.第005部分:帶偏振信號連接.技術規范 | Aerospace series — Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A — Part 005: With polarized signal contact — Product standard |
| BS EN 3661-006-2006 | 航空航天系列.額定電流20A～50A的溫度補償單級斷路器.第006部分:帶偏振信號連接.主線.技術規范 | Aerospace series — Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A — Part 006: With polarized signal contact — Bus bar version — Product standard |
| BS EN 3662-001-2006 | 航空航天系列.額定電流20A～50A的三極溫度補償斷路器.第001部分:技術規范 | Aerospace series — Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A — Part 001: Technical specification |
| BS EN 3662-005-2006 | 航空航天系列.額定電流20A～50A的三極溫度補償斷路器.第005部分:具有偏陣信號連接.產品標準 | Aerospace series — Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A — Part 005: With polarized signal contact — Product standard |
| BS EN 3662-006-2006 | 航空航天系列.額定電流20A～50A的三極溫度補償斷路器.第006部分:具有偏陣信號連接.主線.產品標準 | Aerospace series — Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A — Part 006: With polarized signal contact — Bus-bar version — Product standard |
| BS EN 3663-2001 | 航空航天系列.管連接件.丁腈橡膠制成的O形環.75IRHD.溫度范圍:-55℃到+135℃ | Aerospace Series - Pipe coupling - O-rings in rubber NBR, 75 IRHD, temperature range: -55 °C to + 135 °C |
| BS EN 3668-2006 | 航空航天系列.NI-PH2301(NiCr21Fe18Mo9)型耐熱合金.非熱處理的.鍛坯.a或D≤250mm | Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9) - Non heat treated - Forging stock - a or D ≤ 250 mm |
| BS EN 3671-2007 | 航空航天系列.NI-PH3601(NiCr22Mo9Nb)型耐熱合金.非熱處理.鍛坯.a或D≤250mm | Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Non heat treated - Forging stock - a or D 250 mm |
| BS EN 3677-2007 | 航空航天系列.FE-PM3801(X5CrNiCu17-4)型鋼.空氣熔煉.固溶處理和沉淀處理.鍛件.a或D≤200mm.Rm≥1310MPa | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D 200 mm - Rm 1310 MPa |
| BS EN 3678-2007 | 航空航天系列.FE-PM3801(X5CrNiCu17-4)型鋼.空氣熔煉.固溶處理和沉淀處理.鍛件.a或D≤200mm.Rm≥930MPa | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D 200 mm - Rm 930 MPa |
| BS EN 3682-001-2006 | 航空航天系列.連續工作溫度150℃、裝在板上可互換插入式矩形電插頭和插座連接器.技術規范 | Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Technical specification |
| BS EN 3682-002-2006 | 航空航天系列.150℃連續工作溫度、機架到面板、可互換插入式、矩形的插頭與插座連接器.第002部分:性能和接 | Aerospace series — Connectors, plug and receptacle, electrical,rectangular, interchangeable insert type, rack to panel, operatingtemperature 150 °C continuous — Part 002: Specification of performance and contact arrangements |
| BS EN 3682-004-2006 | 航空航天系列.150 ℃連續工作溫度、支架式到板式可互換插入式矩形插頭和插座電連接器.尺寸2插座.產品標準 | Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 004: Size 2 receptacle - Product standard |
| BS EN 3682-005-2006 | 航空航天系列.150℃連續工作溫度、機架到面板、可互換插入式、矩形的插頭與插座連接器.尺寸2插頭.產品標準 | Aerospace Series - Connectors, plug and receptacle, electrical ,rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 005: Size 2 plug - Product standard |
| BS EN 3682-006-2006 | 航空航天系列.150 ℃連續工作溫度、支架式到板式可互換插入式矩形插頭和插座電連接器.第006部分:尺寸3插座. | Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 006: Size 3 receptacle - Product standard |
| BS EN 3682-008-2006 | 航空航天系列.150 ℃連續工作溫度、支架式到板式可互換插入式矩形插頭和插座電連接器.第008部分:尺寸4插座. | Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 008: Size 4 receptacle - Product standard |
| BS EN 3682-009-2006 | 航空航天系列.連續工作溫度150 ℃支架式到板式可互換插入式矩形插頭和插座電連接器.尺寸4插頭.產品標準 | Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 009: Size 4 plug - Product standard |
| BS EN 3683-2007 | 航空航天系列.試驗方法.鈦合金鍛造產品.基本(α)含量測定.點數法和線截取法 | Aerospace series - Test methods - Titanium alloy wrought products - Determination of primary content - Point count method and line intercept method |
| BS EN 3684-2007 | 航空航天系列.試驗方法.鈦合金鍛造制品.β轉變溫度的測定.金相法 | Aerospace series - Test methods - Titanium alloy wrought products - Determination of transus temperature - Metallographic method |
| BS EN 3688-2001 | 航空航天系列.焊接管用鈦合金制T環形填充物.14000kPa公稱壓力 | Aerospace series - T-ring fillers in titanium alloy for welded pipes - 14000 kPa nominal pressure |
| BS EN 3689-2001 | 航空航天系列.焊接管用鈦合金制T環形填充物.28000kPa公稱壓力 | Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28000 kPa nominal pressure |
| BS EN 3690-2001 | 航空航天系列.鈦合金8°30'管聯接件.長悶頭活接頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead, long |
| BS EN 3691-2001 | 航空航天系列.鈦合金8°30'管連接件.長焊接的悶頭活接頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead, long welded |
| BS EN 3696-2001 | 航空航天系列.耐熱鋼制的墊圈 | Aerospace series - Washers in heat resisting steel |
| BS EN 3709-2006 | 航空航天系列.十二角扳手和套筒.技術規范 | Wrenches and sockets, bi-hexagonal - Technical specification |
| BS EN 3716-004-2006 | 航空航天系列.數字?jǐn)?shù)據傳輸用三軸接線的單路連接器.第004部分:焊接插頭.產品標準 | Aerospace series - Connectors, single-way with triaxial interface , for transmission of digital data - Part 004: Solder plug - Product standard |
| BS EN 3716-005-2006 | 航空航天系列.數字傳輸用三極接口單路連接器.第005部分:壓接插座.產品標準 | Aerospace series — Connector, single-way with triaxial interface,for transmission of digital data — Part 005: Crimp receptacle — Product standard |
| BS EN 3716-006-2006 | 航空航天系列.數字傳輸用三極接口單路連接器.第006部分:壓接插頭.產品標準 | Aerospace series — Connector, single-way with triaxial interface,for transmission of digital data — Part 006: Crimp plug — Product standard |
| BS EN 3719-2005 | 航空航天系列.電纜的鋁或鋁合金導體.產品標準 | Aluminium or aluminium alloy conductors for electrical cables — Product standard |
| BS EN 3725-2005 | 航空航天系列.陽極氧化、MoS2涂覆的鈦合金TI-P64001制長螺紋、標準桿、六瓣凹槽盤頭螺釘.強度等級:1100MPa( | Aerospace series - Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS2 coated - Strength class: 1100 MPa (at ambient temperature) |
| BS EN 3726-2005 | 航空航天系列.耐熱鋼FE-PA2601 (A286)制MoS2涂覆的自鎖夾緊螺母.等級: 1100 MPa(室溫)/425 鳦 | Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature)/425 °C |
| BS EN 3730-2001 | 航空航天系列..鞍座形夾子.帶橡膠彈性墊料的鋁合金的固定式滑動型.尺寸.質量 | Aerospace series - Clamps, saddle - Fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions - Masses |
| BS EN 3733-008-2006 | 航空航天系列.連續工作溫度150°C自鎖緊環連接的單路圓形光連接器.EN4532(200mu/280mu纖維)的電纜用插頭組 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Plug sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre) - Product standard |
| BS EN 3733-009-2006 | 航空航天系列.連續工作溫度150°C自鎖緊環連接的單路圓形光連接器.EN4532(200mu/280mu纖維)的電纜用插孔組 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Receptacle sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre) - Product standard |
| BS EN 3741-2005 | 航空航天系列.米制夾緊螺母.安裝孔和組件 | Aerospace series - Nuts, clip, metric - Installation holes and assembly |
| BS EN 3745-201-2002 | 航空航天系列.飛行器用光纖和光纜.試驗方法.外觀檢查 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Visual examination |
| BS EN 3745-202-2005 | 航空航天系列.飛行器用光纖和光纜.試驗方法.纖維尺寸 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202: Fibre dimensions |
| BS EN 3745-205-2002 | 航空航天系列.飛行器用光纖和光纜.試驗方法.光纜縱向尺寸的穩定性 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Cable longitudinal dimensional stability |
| BS EN 3745-301-2002 | 航空航天系列.飛行器用光纖和光纜.試驗方法.衰減性 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Attenuation |
| BS EN 3745-302-2002 | 航空航天系列.飛行器用光纖和光纜.試驗方法.數字孔徑 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Numerical aperture |
| BS EN 3745-305-2002 | 航空航天系列.飛行器用光纖和光纜.試驗方法.周圍光耦合的消除 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Immunity to ambient light coupling |
| BS EN 3745-306-2005 | 航空航天系列.飛行器用光纖和光纜.試驗方法.溫度循環中的衰減變化 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling |
| BS EN 3745-401-2005 | 航空航天系列.飛行器用光纖和光纜.試驗方法.加速老化 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 401: Accelerated ageing |
| BS EN 3745-402-2005 | 航空航天系列.飛行器用光纖和光纜.試驗方法.溫度循環 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling |
| BS EN 3745-404-2005 | 航空航天系列.飛行器用光纖和光纜.試驗方法.熱沖擊試驗 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock |
| BS EN 3745-406-2005 | 航空航天系列.飛行器用光纖和光纜.試驗方法.冷彎曲試驗 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 406: Cold bend test |
| BS EN 3745-407-2005 | 航空航天系列.飛行器用光纖和光纜.試驗方法.易燃性 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 407: Flammability |
| BS EN 3745-503-2005 | 航空航天系列.飛行器用光纖和光纜.試驗方法.擦傷磨蝕 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503: Scrape abrasion |
| BS EN 3745-504-2002 | 航空航天系列.飛行器用光纖和光纜.試驗方法.微彎曲試驗 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Micro bending test |
| BS EN 3745-507-2002 | 航空航天系列.飛行器用光纖和光纜.試驗方法.切割 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Cut-through |
| BS EN 3745-508-2002 | 航空航天系列.飛行器用光纖和光纜.試驗方法.扭轉力 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Torsion |
| BS EN 3745-509-2002 | 航空航天系列.飛行器用光纖和光纜.試驗方法.紐結試驗 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Kink test |
| BS EN 3745-510-2002 | 航空航天系列.飛行器用光纖和光纜.試驗方法.彎曲試驗 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Bending test |
| BS EN 3745-511-2002 | 航空航天系列.飛行器用光纖和光纜.試驗方法.電纜間的磨蝕 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Cable to cable abrasion |
| BS EN 3745-512-2005 | 航空航天系列.飛行器用光纖和光纜.試驗方法.耐彎曲 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 512: Flexure endurance |
| BS EN 3745-513-2005 | 航空航天系列.飛行器用光纖和光纜.試驗方法.抗擠壓 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 513: Crush resistance |
| BS EN 3745-701-2002 | 航空航天系列.飛行器用光纖和光纜.試驗方法.可剝離性 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Strippability |
| BS EN 3745-703-2005 | 航空航天系列.飛行器用光纖和光纜.試驗方法.生產商標記的耐久性 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 703: Durability of manufacturer's marking |
| BS EN 3746-2007 | 航空航天系列.氟硅酮橡膠(FVMQ)O型密封圈.硬度為80IRHD | Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Hardness 80 IRHD |
| BS EN 3747-2007 | 航空航天系列.氟硅酮橡膠(FVMQ)O型密封圈.技術規范 | Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification |
| BS EN 3748-2001 | 航空航天系列.O形環槽.尺寸 | Aerospace series - O-ring grooves - Dimensions |
| BS EN 3752-2005 | 航空航天系列.耐熱鋼FE-PA2601(A286)制MoS2涂覆的自鎖MJ螺紋螺母.等級: 1100 MPa(室溫)/425 鳦.技術規范 | Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), MoS2 coated - Classification: 1100 MPa (at ambient temperature) / 425 °C - Technical specification |
| BS EN 3788-2001 | 航空航天系列.8°30'管聯接器.防護管帽 | Aerospace series - Pipe coupling 8 °30' - Protective caps |
| BS EN 3789-2001 | 航空航天系列.管聯接器8°30'.帶外螺紋的防護管塞 | Aerospace series - Pipe coupling 8 °30' - Protective plug with external threads |
| BS EN 3790-2001 | 航空航天系列.管連接件8°30'.帶內螺紋的防護管帽 | Aerospace series - Pipe coupling 8 °30' - Protective caps with internal threads |
| BS EN 3816-2006 | 航空航天系列.FE-PA3601(X6CrNiTi18-10)鋼.空氣融化.軟化冷軋.薄板材和帶材.a≤3mm.Rm≥800 MPa | Aerospace series — Steel FE-PA3601 (X6CrNiTi18-10) — Air melted — Softened and cold rolled — Sheet and strip — a ≤ 3 mm — Rm ≥ 800 MPa |
| BS EN 3818-2005 | 航空航天系列.MJ螺紋的鈦合金TI-P64001螺栓.強度等級:1100MPa(室溫).技術規范 | Aerospace series - Bolts, MJ threads, in titanium alloy TI-P64001 - Strength class: 1100 MPa (at ambient temperature) - Technical specification |
| BS EN 3831-2004 | 航空航天系列.耐熱鋼FE-PM3801 (17-4PH)制MoS2涂覆的自鎖緊MJ螺紋厚壁插件 | Aerospace series - Inserts, thickwall, self-locking, MJ threads, in heat resisting steel FE-PM3801 (17-4PH), MoS2 coated |
| BS EN 3832-2005 | 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制長螺紋、細桿、十二角螺栓.等級:1550MPa(室溫)/650℃ | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature) / 650 °C |
| BS EN 3833-2005 | 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制MJ螺紋螺栓.等級:1550MPa(室溫)/650℃.技術規范 | Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1550 MPa (at ambient temperature) / 650 °C - Technical specification |
| BS EN 3840-2007 | 航空航天系列.涂料和清漆.技術規范 | Aerospace series - Paints and varnishes - Technical specification |
| BS EN 3841-100-2005 | 航空航天系列.斷路器.試驗方法.總則 | Aerospace series - Circuit breakers - Test methods - General |
| BS EN 3841-201-2005 | 航空航天系列.斷路器.試驗方法.外觀檢查 | Aerospace series - Circuit breakers - Test methods - Visual inspection |
| BS EN 3841-202-2005 | 航空航天系列.斷路器.試驗方法.尺寸和質量 | Aerospace series - Circuit breakers - Test methods - Dimensions and masses |
| BS EN 3841-301-2005 | 航空航天系列.斷路器.試驗方法.電壓降 | Aerospace series - Circuit breakers - Test methods - Voltage drop |
| BS EN 3841-302-2005 | 航空航天系列.斷路器.試驗方法.絕緣電阻 | Aerospace series - Circuit breakers - Test methods - Insulation resistance |
| BS EN 3841-303-2005 | 航空航天系列.斷路器.試驗方法.介電強度 | Aerospace series - Circuit breakers - Test methods - Dielectric strength |
| BS EN 3841-304-2005 | 航空航天系列.斷路器.試驗方法.跳閘點 | Aerospace series - Circuit breakers - Test methods - Tripping points |
| BS EN 3841-305-2005 | 航空航天系列.斷路器.試驗方法.短路性能 | Aerospace series - Circuit breakers - Test methods - Short-circuit performance |
| BS EN 3841-306-2005 | 航空航天系列.斷路器.試驗方法.使用壽命 | Aerospace series - Circuit breakers - Test methods - Service life |
| BS EN 3841-307-2005 | 航空航天系列.斷路器.試驗方法.帶鎖定跳閘裝置的斷路器的性能 | Aerospace series - Circuit breakers - Test methods - Performance with a locked tripping system |
| BS EN 3841-308-2005 | 航空航天系列.斷路器.試驗方法.閃電 | Aerospace series - Circuit breakers - Test methods - Lightning |
| BS EN 3841-401-2005 | 航空航天系列.斷路器.試驗方法.沙和灰塵 | Aerospace series - Circuit breakers - Test methods - Sand and dust |
| BS EN 3841-402-2005 | 航空航天系列.斷路器.試驗方法.腐蝕 | Aerospace series - Circuit breakers - Test methods - Corrosion |
| BS EN 3841-404-2005 | 航空航天系列.斷路器.試驗方法.防爆 | Aerospace series - Circuit breakers - Test methods - Explosion proofness |
| BS EN 3841-405-2005 | 航空航天系列.斷路器.試驗方法.防水 | Aerospace series - Circuit breakers - Test methods - Fluid resistance |
| BS EN 3841-406-2005 | 航空航天系列.斷路器.試驗方法.易燃性 | Aerospace series - Circuit breakers - Test methods - Flammability |
| BS EN 3841-407-2005 | 航空航天系列.斷路器.試驗方法.溫度變化 | Aerospace series - Circuit breakers - Test methods - Temperature variation |
| BS EN 3841-501-2005 | 航空航天系列.斷路器.試驗方法.調整片操縱按鈕調動 | Aerospace series - Circuit breakers - Test methods - Actuator button travel |
| BS EN 3841-503-2005 | 航空航天系列.斷路器.試驗方法.傳動組件強度 | Aerospace series - Circuit breakers - Test methods - Strength of actuating components |
| BS EN 3841-504-2005 | 航空航天系列.斷路器.試驗方法.安裝元件強度 | Aerospace series - Circuit breakers - Test methods - Strength of mounting elements |
| BS EN 3841-505-2005 | 航空航天系列.斷路器.試驗方法.主接線端強度 | Aerospace series - Circuit breakers - Test methods - Strength of main terminals |
| BS EN 3841-506-2005 | 航空航天系列.斷路器.試驗方法.抗振性能 | Aerospace series - Circuit breakers - Test methods - Vibration performance |
| BS EN 3841-507-2005 | 航空航天系列.斷路器.試驗方法.機械沖擊 | Aerospace series - Circuit breakers - Test methods - Mechanical shocks |
| BS EN 3841-508-2005 | 航空航天系列.斷路器.試驗方法.離心式加速 | Aerospace series - Circuit breakers - Test methods - Centrifugal acceleration |
| BS EN 3841-509-2005 | 航空航天系列.斷路器.試驗方法.信號接線柱的插入力和拔出力 | Aerospace series - Circuit breakers - Test methods - Insertion and extraction forces of signal contact terminals |
| BS EN 3841-510-2005 | 航空航天系列.斷路器.試驗方法.信號接線柱強度 | Aerospace series - Circuit breakers - Test methods - Strength of signal contact terminals |
| BS EN 3841-511-2005 | 航空航天系列.斷路器.試驗方法.組合試驗:溫度、高度和振動 | Aerospace series - Circuit breakers - Test methods - Combined test: temperature, altitude and vibration |
| BS EN 3842-2001 | 航空航天系列.耐腐蝕鋼制成的流體用圓形管.直徑3.2mm 100mm.厚度0.32mm 2.5mm.尺寸 | Aerospace series - Circular tubes for fluids in corrosion resistant steel - Diameter 3,2 mm D 100 mm - Thickness 0,32 mm a 2,5 mm - Dimensions |
| BS EN 3848-2001 | 航空航天系列.金屬半成品.測量形狀偏差的方法 | Aerospace series - Semi-finished metallic products - Methods of measuring form deviations |
| BS EN 3851-2003 | 航空航天系列.TI-P64001型鈦合金制60 球面管聯接器.直的回轉螺帽 | Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Swivel nuts, straight |
| BS EN 3852-2002 | 航空航天系列.TI-P64001型鈦合金制、球形、60度管連接器.直螺紋式焊接接頭 | Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded |
| BS EN 3853-2002 | 航空航天系列.TI-P64001型鈦合金制、球形、60度管連接器.直活螺紋接頭 | Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Straight unions, threaded |
| BS EN 3854-2002 | 航空航天系列.TI-P64001型鈦合金制、球形、60度管連接器.焊接箍 | Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Ferrules, welded |
| BS EN 3855-2002 | 航空航天系列.TI64001型鈦合金制、球形、60度管連接器.蓋 | Aerospace series - Pipe couplings, 60 ° spherical, in titanium alloy TI-P64001 - Caps |
| BS EN 3856-2002 | 航空航天系列.TI-P64001型鈦合金制、球形、60度管連接器.止推金屬線用轉動螺母 | Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Swivel nuts for thrust wire |
| BS EN 3857-2002 | 航空航天系列.TI-P64001型鈦合金制、球形、60度管連接器.焊接90度彎頭 | Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Elbows 90 °, welded |
| BS EN 3858-2002 | 航空航天系列.TI-P64001型鈦合金制、球形、60度管連接器.FE-PA 13刑止推鋼絲 | Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Thrust wires in steel FE-PA 13 |
| BS EN 3867-2005 | 航空航天系列.管連接件、松套法蘭和密封件.鈦合金TI-P64001法蘭 | Aerospace series - Pipe couplings, loose flanges and seals - Flanges in titanium alloy TI-P64001 |
| BS EN 3868-2005 | 航空航天系列.管連接件、松套法蘭和密封件.鈦合金TI-P64001焊接法蘭連接件 | Aerospace series - Pipe couplings, loose flanges and seals - Flange connectors, welded, in titanium alloy TI-P64001 |
| BS EN 3869-2004 | 航空航天系列.管連接件、松套法蘭和密封件.碳氟化合物橡膠密封件和鋁合金保護殼 | Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy |
| BS EN 3872-2005 | 航空航天系列.鋁合金AL-R39002-H112.模鍛件.a≤200 mm | Aerospace series - Aluminium alloy AL-R39002-H112 - Die forgings - a 200 mm |
| BS EN 3882-2001 | 航空航天系列.耐熱合金NI-WH1801(NiCr20Co18Ti3Al2).焊接用填充金屬絲 | Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler wire for welding |
| BS EN 3883-2001 | 航空航天系列.耐熱合金NI-WH2301(NiCr22Fe19Mo9Co2).焊接用填充金屬 | Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding |
| BS EN 3884-2001 | 航空航天系列.耐熱合金NI-WH2601(NiCr19Nb5Mo3Ti).焊接用填充金屬 | Aerospace series - Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal for welding |
| BS EN 3885-2001 | 航空航天系列.耐熱合金NI-WH3601(NiCr22Mo9Nb4).焊接用填充金屬 | Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding |
| BS EN 3886-2001 | 航空航天系列.耐熱合金NI-WH1303(NiCo20Cr20Mo5Ti2Al).焊接用填充金屬 | Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) - Filler metal for welding |
| BS EN 3887-2001 | 航空航天系列.耐熱合金鋼CO-WH4101(CoCr20W15Ni).焊接填充金屬 | Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding |
| BS EN 3888-2001 | 航空航天系列.耐熱合金CO-WH1402(CoCr22Ni22W15).焊接用填充金屬 | Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding |
| BS EN 3889-2002 | 航空航天系列.FE-WM3801(X5CrNiCu17-4)鋼.焊接用填充金屬 | Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4) - Filler metal for welding |
| BS EN 3890-2002 | 航空航天系列.鋼FE-WM1502(X11CrNiMoVN12-3).焊接用填充金屬 | Aerospace series - Steel FE-WM1502 (X11CrNiMoVN12-3) - Filler metal for welding |
| BS EN 3892-2001 | 航空航天系列.鈦合金TI-W64001.焊接填充金屬 | Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding |
| BS EN 3893-2001 | 航空航天系列.鈦合金TI-W19001.焊接用填充金屬 | Aerospace series - Titanium alloy TI-W19001 - Filler metal for welding |
| BS EN 3894-2001 | 航空航天系列.耐熱合金NI-WD3201(NiMo25Fe6Cr5).焊接填充金屬 | Aerospace series - Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal for welding |
| BS EN 3895-2001 | 航空航天系列,耐熱合金NI-WH3901(NiCr16Mo15).焊接填充金屬 | Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding |
| BS EN 3896-2002 | 航空航天系列.鋼FE-WM1501(X13CrNiMoCo12-3-2-2).焊接用填充金屬 | Aerospace series - Steel FE-WM1501 (X13CrNiMoCo12-3-2-2. Filler metal for welding |
| BS EN 3897-2002 | 航空航天系列.鋼FE-WA4801(X6CrNiMnNb18-10).焊接用填充金屬 | Aerospace series - Steel FE-WA4801 (X6CrNiMnNb18-10) - Filler metal for welding |
| BS EN 3899-2004 | 航空航天系列.耐熱鋼FE-PM3801(17-4PH)制MJ螺紋自鎖厚壁插件.技術規范 | Aerospace series - Inserts, thickwall, self-locking, MJ threads, in heat resisting steel FE-PM3801 (17-4PH) - Technical specification |
| BS EN 3907-2004 | 航空航天系列.標準桿長螺紋雙六角頭鍍MoS2的鈦合金TI-P64001螺栓.等級:1100MPa(室溫)/350 鳦 | Aerospace series - Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS2 coated - Classification: 1100MPa (at ambient temperature)/350 °C |
| BS EN 3912-2007 | 航空航天系列.鍍銀FE-PA2601(FE-PA92HT,A286)型長螺紋細桿六瓣凹槽平頭螺栓耐熱鋼.分類:1100MPa(環境溫度)/ | Aerospace series - Bolts, pan head, six lobe recess, relieved shank, long thread, in heat resisting steel FE-PA2601 (FE-PA92HT, A286), silver plated - Classification: 1100 MPa (at ambient temperature) / 650 °C |
| BS EN 3913-2007 | 航空航天系列.部件修復用內螺紋鍍銀、NI-PH2601(Ni-P100HT, Inconel 718)型耐熱鎳基合金、短自鎖薄壁嵌鑲件 | Aerospace series - Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (Ni-P100HT, Inconel 718), silver plated on internal thread, for salvage of components |
| BS EN 3920-2001 | 航空航天系列.鎳基合金 Ni-B41202.硬釬焊填充金屬.粉末或膏體 | Aerospace series - Nickel base alloy NI-B41202 (NiCr14Fe5Si5B3) - Filler metal for brazing - Powder or paste |
| BS EN 3921-2001 | 航空航天系列.鎳基合金 Ni-B41203.硬扦焊填充金屬.非晶態箔 | Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Amorphous foil |
| BS EN 3923-2001 | 航空航天系列.鎳基合金Ni-B41203(NiCr7Si5B3Fe3).硬釬焊填充金屬.粉末或糊料 | Aerospace series - Nickel base alloy NI - B41203 (NiCr7Si5B3Fe3) - Filler metal for brazing - Powder or paste |
| BS EN 3925-2001 | 航空航天系列.鎳基合金NI-B40001(NiSi5B3).硬釬焊用填充金屬.非晶形箔 | Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Amorphous foil |
| BS EN 3926-2001 | 航空航天系列.鎳基合金NI-B40001(NiSi5B3).硬釬焊用填充金屬.硼化物箔 | Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Borided foil |
| BS EN 3927-2001 | 航空航天系列.NI-B40001(NiSi5B3)鎳基合金.硬釬焊用填充金屬.粉末或糊料 | Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Powder or paste |
| BS EN 3930-2001 | 航空航天系列.鎳基合金NI-B31001(NiCr19Si10).硬釬焊用填充金屬.粉末或糊料 | Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing - Powder or paste |
| BS EN 3932-2001 | 航空航天系列.鎳基合金NI-B13001(NiP11).硬釬焊用填充金屬.非晶形箔 | Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Amorphous foil |
| BS EN 3933-2001 | 航空航天系列.鎳基合金NI-B13001(NiP11).硬釬焊用填充金屬.粉末或糊料 | Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Powder or paste |
| BS EN 3934-2001 | 航空航天系列.鎳基合金NI-B21001(NiCr15B4).硬釬焊用填充金屬.非晶形箔 | Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Amorphous foil |
| BS EN 3935-2001 | 航空航天系列.鎳基合金 Ni-B21001.硼化物箔 | Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Borided foil |
| BS EN 3936-2001 | 航空航天系列.鎳基合金NI-B21001(NiCr15B4).硬釬焊用填充金屬.粉末或糊料 | Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Powder or paste |
| BS EN 3937-2001 | 航空航天系列.鎳基合金NI-B44101(NiW12Cr10Si4Fe3B3).硬釬焊用填充金屬.粉末或糊料 | Aerospace series - Nickel base alloy NI-B44101 (NiW12Cr10Si4Fe3B3) - Filler metal for brazing - Powder or paste |
| BS EN 3938-2001 | 航空航天系列.鎳基合金 Ni-B46001.非晶態箔 | Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) Filler metal for brazing - Amorphous foil |
| BS EN 3939-2001 | 航空航天系列.鎳基合金 Ni-B46001.硬釬焊填充金屬.粉末或膏體 | Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Powder or paste |
| BS EN 3941-2001 | 航空航天系列.鎳基合金 Ni-B41204.硬釬焊填充金屬.非晶態箔 | Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Amorphous foil |
| BS EN 3942-2001 | 航空航天系列.鎳基合金NI-B41204(NiCr13Si4B3).硬釬焊用填充金屬.硼化物箔 | Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Borided foil |
| BS EN 3943-2001 | 航空航天系列.鎳基合金NI-B41204(NiCr13Si4B3).硬釬焊用填充金屬.粉末或糊料 | Aerospace series - Nickel base alloy NI-B41204 (NiCr13Fe4Si4B3) - Filler metal for brazing - Powder or paste |
| BS EN 3945-2001 | 航空航天系列.鎳基合金 Ni-B48801.硬釬焊填充金屬.粉末或膏體 | Aerospace series - Nickel base alloy NI-B48801 (NiMn19Si6Cu4B) - Filler metal for brazing - Powder or paste |
| BS EN 3946-2001 | 航空航天系列.鎳基合金 Ni-15701.硬釬焊填充金屬.粉末或膏體 | Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Powder or paste |
| BS EN 3952-2001 | 航空航天系列.銀基合金AG-B10001(AgCu28).硬釬焊用填充金屬.金屬絲 | Aerospace series - Silver base alloy AG-B10001 (AgCu28) - Filler metal for brazing - Wire |
| BS EN 3953-2001 | 航空航天系列.銀基合金AG-B12401(AgCu40Zn5Ni).硬釬焊用填充金屬.金屬絲 | Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Wire |
| BS EN 3954-2001 | 航空航天系列.銀基合金AG-B12401(AgCu40Zn5Ni).硬釬焊用填充金屬.粉末或糊料 | Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Powder or paste |
| BS EN 3955-2001 | 航空航天系列.銀基合金AG-B12401(AgCu40Zn5Ni).硬釬焊用填充金屬.軋制的箔材 | Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Rolled foil |
| BS EN 3956-2001 | 航空航天系列.銀基合金AG-B14001(AgCu42Ni2).硬釬焊用填充金屬.金屬絲 | Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Wire |
| BS EN 3957-2001 | 航空航天系列.銀基合金AG-B14001(AgCu42Ni2).硬釬焊用填充金屬.粉末或糊料 | Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Powder or paste |
| BS EN 3958-2001 | 航空航天系列.銀基合金AG-B14001(AgCu42Ni2).硬釬焊用填充金屬.軋制的箔材 | Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Rolled foil |
| BS EN 3959-2001 | 航空航天系列.鈷基合金CO-B41601(CoCr19Ni17Si8W4).硬釬焊填充金屬.粉末或糊料 | Aerospace series - Cobalt base alloy CO-B41601 (CoCr19Ni17Si8W4) - Filler metal for brazing - Powder or paste |
| BS EN 3960-2001 | 航空航天系列.金基合金AU-B40001(AuNi18).硬釬焊填充金屬.粉末和糊料 | Aerospace series - Gold base alloy AU-B40001 (AuNi18) - Filler metal for brazing - Powder or paste |
| BS EN 3961-2001 | 航空航天系列.金基合金AU-B4000.硬釬焊用填充金屬.軋制箔 | Aerospace series - Gold base alloy AU-B4000 - Filler metal for brazing - Rolled foil |
| BS EN 3962-2001 | 航空航天系列.金基合金AU-B40001.硬釬焊用填充金屬.金屬絲 | Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Wire |
| BS EN 3963-2001 | 航空航天系列.銅CU-BU9001.硬釬焊用填充金屬.軋制的箔材 | Aerospace series - Copper CU-BU9001 - Filler metal for brazing - Rolled foil |
| BS EN 3964-2001 | 航空航天系列.銅CU-BU9001.硬釬焊用填充金屬.金屬絲 | Aerospace series - Copper CU-BU9001 - Filler metal for brazing - Wire |
| BS EN 3965-2001 | 航空航天系列.鈦合金TI-B17001.硬釬焊用填充金屬.軋制的箔材 | Aerospace series - Titanium alloy TI-B17001 - Filler metal for brazing - Rolled foil |
| BS EN 3969-2006 | 航空航天系列.FE-PL1507(40CrMoV12)型鋼.空氣冶煉.退火的.鍛坯.a或D≤350mm | Aerospace series - Steel FE-PL1507 (40CrMoV12) - Air melted - Annealed - Forging stock - a or D ≤ 350 mm |
| BS EN 3971-2006 | 航空航天系列.FE-PL1507(40CrMoV12)型鋼.自耗電極再冶煉.退火的.鍛坯.a或D≤350mm | Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Annealed - Forging stock - a or D ≤ 350 mm |
| BS EN 3972-2006 | 航空航天系列.FE-PL1507(40CrMoV12)型鋼.自耗電極再冶煉.淬火并回火.機加工用棒.De≤50mm.1250MPa≤Rm≤140 | Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered - Bar for machining - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa |
| BS EN 3973-2006 | 航空航天系列.FE-CM3801(X5CrNiCuNb16-4)型鋼.均勻溶解處理和沉淀淬火.熔模鑄造.De≤50mm.Rm≥1030MPa | Aerospace series - Steel FE-CM3801 (X5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened - Investment casting - De ≤ 50 mm - Rm ≥ 1 030 MPa |
| BS EN 3976-2006 | 航空航天系列.鈦和鈦合金.試驗方法.氫含量測定用化學分析 | Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content |
| BS EN 3979-2005 | 航空航天系列.AL-P8090-O2型鋁合金.超塑性成型(SPF)用薄板材.0.8mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P8090-O2 - Sheet for superplastic forming (SPF) - 0,8 mm <= a <= 6 mm |
| BS EN 3997-2007 | 航空航天系列.AL-P2024-T3型鋁合金.薄板材和帶材.0.4mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P2024-T3 - Sheet and strip 0 ,4 mm $3Q a $3Q 6 mm |
| BS EN 3998-2007 | 航空航天系列.AL-P2024-T4或T42型鋁合金.薄板材和帶材.0.3mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Sheet and strip - 0,3 mm a 6 mm |
| BS EN 3999-2007 | 航空航天系列.AL-P2024-T351型鋁合金.改進的化學銑削性能1.6mm≤a≤6mm的薄板材和帶材 | Aerospace series - Aluminium alloy AL-P2024-T351 - Sheet and strip with improved chemical milling capability 1,6 mm a 6 mm |
| BS EN 4000-2002 | 航空航天系列.金屬材料.金屬半成品的尺寸標準起草和說明規則 | Aerospace series - Metallic materials - Rules for the drafting and presentation of dimensional standards for metallic semi-finished products |
| BS EN 4001-2007 | 航空航天系列.AL-P2024-T351型鋁合金.改進的化學銑削性能1.6mm≤a≤6mm的鍍鋁薄板材和帶材 | Aerospace series - Aluminium alloy AL-P2024-T351 - Clad sheet and strip with improved chemical milling capability 1,6 mm a 6 mm |
| BS EN 4002-2007 | 航空航天系列.AL-P2219-T81型鋁合金.0.5mm≤a≤6mm的薄板材和帶材 | Aerospace series - Aluminium alloy AL-P2219-T81 - Sheet and strip 0,5 mm a 6 mm |
| BS EN 4003-2006 | 航空航天系列.鋁合金AL-P2219-T87.薄板材和帶材0.5mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P2219-T87 - Sheet and strip 0,5 mm a 6 mm |
| BS EN 4004-2007 | 航空航天系列.AL-P3103-H16型鋁合金.薄板材和帶材.0.4mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P3103-H16 - Sheet and strip - 0,4 mm a 6 mm |
| BS EN 4005-2007 | 航空航天系列.AL-P5052-O型鋁合金.薄板材和帶材.0.3mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P5052-O - Sheet and strip 0 ,3 mm a 6 mm |
| BS EN 4006-2007 | 航空航天系列.AL-P6082-T4或T42型鋁合金.薄板材和帶材.0.4mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P6082-T4 or T42 - Sheet and strip 0,4 mm a 6 mm |
| BS EN 4008-001-2006 | 航空航天系列.電氣和光學連接部件.卷邊工具和相關附件.第001部分:技術規范 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 001: Technical specification |
| BS EN 4008-002-2006 | 航空航天系列.電氣和光學連接部件.卷邊工具和相關附件.第002部分:產品標準列表 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 002: List of product standards |
| BS EN 4008-005-2006 | 航空航天系列.電氣和光學連接部件.卷邊工具和相關附件.第005部分:M22520/2-01型卷邊工具用定位器.產品標準 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 005: Positioner for crimping tool M22520/2-01 - Product standard |
| BS EN 4008-006-2006 | 航空航天系列.電氣和光學連接部件.卷邊工具和相關附件.第006部分:M22520/7型卷邊工具用定位器.產品標準 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 006: Positioner for crimping tool M22520/7 - Product standard |
| BS EN 4008-007-2006 | 航空航天系列.電氣和光學連接部件.卷邊工具和相關附件.第007部分:M22520/2-01型卷邊工具用定位器.產品標準 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 007: Positioner for crimping tool M22520/2-01 - Product standard |
| BS EN 4008-008-2006 | 航空航天系列.電氣和光學連接部件.卷邊工具和相關附件.第008部分:M22520/7-01型卷邊工具用定位器.產品標準 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 008: Positioner for crimping tool M22520/7-01 - Product standard |
| BS EN 4008-011-2006 | 航空航天系列.電氣和光學連接部件.卷邊工具和相關附件.第011部分:M22520/2-01型卷邊工具用定位器.產品標準 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 011: Positioner for crimping tool M22520/2-01 - Product standard |
| BS EN 4008-012-2006 | 航空航天系列.電氣和光學連接部件.卷邊工具和相關附件.第012部分:M22520/2-01型卷邊工具用定位器.產品標準 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 012: Positioner for crimping tool M22520/2-01 - Product standard |
| BS EN 4008-013-2006 | 航空航天系列.電氣和光學連接部件.卷邊工具和相關附件.M22520/2-01型卷邊工具用定位器.產品標準 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Positioner for crimping tool M22520/2-01 - Product standard |
| BS EN 4008-014-2006 | 航空航天系列.電氣及光學連接部件.壓接工具及其附件.M22520/31-01型壓接工具用轉盤.產品標準 | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Turret for crimping tool M22520/31-01 - Product standard |
| BS EN 4008-017-2006 | 航空航天系列.電氣及光學連接部件.壓接工具和相關部件.第017部分:M22520/41-01型壓接工具頭.產品標準 | Aerospace series — Elements of electrical and optical connection — Crimping tools and associated accessories — Part 017: Head for crimping tool M22520/4-01 — Product standard |
| BS EN 4009-2005 | 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制中長螺紋、緊公差柄、十二角頭螺栓.等級:1550MPa(室 | Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature) |
| BS EN 4011-2005 | 航空航天系列.十二角頭自鎖緊的鍍銀耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)螺母.等級:1550MPa(室溫)/600 鳦 | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature)/600 °C |
| BS EN 4012-2004 | 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制MoS2涂覆的自鎖緊雙六角頭螺母.等級:1550MPa(室溫)/4 | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification - 1 550 MPa (at ambient temperature) / 425 °C |
| BS EN 4013-2005 | 航空航天系列.自鎖緊鍍銀耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制帶柄螺母.等級:1550MPa(室溫)/600 鳦 | Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature) / 600 °C |
| BS EN 4014-2004 | 航空航天系列.自鎖、厚壁插件.設計標準 | Aerospace series - Inserts, thickwall, self-locking - Design standard |
| BS EN 4015-2004 | 航空航天系列.自鎖、厚壁插件.安裝和拆除方法 | Aerospace series - Inserts, thickwall, self-locking - Installation and removal procedure |
| BS EN 4017-2001 | 航空航天系列.鈦合金管連接件8°30'.90°彎頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 ° |
| BS EN 4018-2001 | 航空航天系列.鈦合金管連接件8°30'.帶止推金屬絲螺母的90°彎頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 ° with thrust wire nut |
| BS EN 4019-2001 | 航空航天系列.鈦合金管連接件8°30'.焊接的90°彎頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 °, welded |
| BS EN 4020-2001 | 航空航天系列.鈦合金8°30'管連接件.帶止推金屬絲螺母(thrust wire nut)的90°彎頭焊接端 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 °, welded end with thrust wire nut |
| BS EN 4021-2001 | 航空航天系列.鈦合金管連接件8°30'.悶頭90°彎頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 °, bulkhead |
| BS EN 4022-2001 | 航空航天系列.鈦合金管連接件8°30'.悶頭、90°彎頭焊接端頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 °, bulkhead, welded end |
| BS EN 4023-2001 | 航空航天系列.鈦合金管連接件8°30'.45°彎頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 45 ° |
| BS EN 4024-2001 | 航空航天系列.鈦合金管連接件8°30'.帶止推金屬絲螺母的45°彎頭焊接端頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 45 ° welded end with thrust wire nut |
| BS EN 4025-2001 | 航空航天系列.鈦合金管連接件8°30'.45°彎頭悶頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 45 °, bulkhead |
| BS EN 4026-2001 | 航空航天系列.鈦合金管連接件8°30'.三通管 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees |
| BS EN 4027-2001 | 航空航天系列.鈦合金管連接件8°30'.帶止推金屬絲螺母的三通管分支 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees branch with thrust wire nut |
| BS EN 4028-2001 | 航空航天系列.鈦合金管連接件8°30'.在使用的帶止推金屬絲螺母的三通管 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees with thrust wire nut on run |
| BS EN 4029-2001 | 航空航天系列.鈦合金管連接件8°30'.三通管悶頭分支 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees bulkhead branch |
| BS EN 4030-2001 | 航空航天系列.鈦合金管連接件8°30'.還在使用的三通管悶頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees bulkhead on run |
| BS EN 4031-2001 | 航空航天系列.鈦合金管連接件8°30'.焊接活接頭用螺母 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Nut for welded union |
| BS EN 4032-2001 | 航空航天系列.鈦合金管連接件8°30'.止推金屬絲 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Thrust wire |
| BS EN 4033-2007 | 航空航天系列.飛機機架轉動軸承.剛性單列耐腐蝕鋼滾珠軸承.內徑間隙遞減的8和9直徑系列.尺寸和負荷 | Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9, reduced internal radial clearance - Dimensions and loads |
| BS EN 4034-2007 | 航空航天系列.飛機機架轉動軸承.耐腐蝕鋼中帶法蘭外圈內徑遞減的自準雙列自調滾珠軸承.尺寸和負荷 | Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings with flanged outer ring in corrosion resisting steel, reduced internal radial clearance - Dimensions and loads |
| BS EN 4035-2006 | 航空航天系列.減小內部徑向間隙和帶螺紋鈦合金桿耐腐蝕鋼可調自動對心雙列球軸承的桿端.尺寸和載荷 | Rod ends, adjustable with self-aligning double row ball bearing in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy - Dimensions and loads |
| BS EN 4036-2006 | 航空航天系列.減小內部徑向間隙耐腐蝕鋼可調自動對心雙列球軸承和螺紋柄的桿端.尺寸和載荷 | Rod ends, adjustable with self-aligning double row ball bearing and threaded shank in corrosion resisting steel, reduced internal radial clearance - Dimensions and loads |
| BS EN 4040-2006 | 航空航天.寬內環的帶自潤滑內襯的耐蝕鋼制關節軸承.室溫高負荷.尺寸和負荷 | Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring - Elevated loads at ambient temperature - Dimensions and loads |
| BS EN 4045-2001 | 航空航天系列.耐熱合金制的無縫毛細管.直徑為0.6mm 2mm.尺寸 | Aerospace series - Capillary tubes, seamless in heat resisting alloys - Diameter 0,6 mm D 2 mm - Dimensions |
| BS EN 4047-2004 | 航空航天系列.自鎖緊MJ螺紋鍍銀耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)螺母.等級:1550MPa(室溫)/600 鳦.技術 | Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550MPa (at ambient temperature)/600 °C - Technical specification |
| BS EN 4048-2004 | 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制MoS2涂覆的自鎖、帶MJ螺紋的螺母.等級:1550MPa(室溫) | Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification - 1 550 MPa (at ambient temperature) / 425 °C - Technical specification |
| BS EN 4049-001-2006 | 航空航天系列.熱電偶膨脹電纜.工作溫度在65℃～260℃之間.第001部分:技術規范 | Aerospace series - Thermocouple extension cable - Operatingtemperatures between p 65 °C to 260 °C - Part 001: Technical specification |
| BS EN 4049-003-2006 | 航空航天系列.熱電偶膨脹電纜.工作溫度65℃～260℃.第003部分:單芯鎳鉻/鎳鋁電纜.產品標準 | Aerospace series - Thermocouple extension cable - Operatingtemperatures between p 65 °C to 260 °C - Part 003: Single core nickel chromium/nickel aluminium - Product standard |
| BS EN 4049-004-2006 | 航空航天系列.熱電偶膨脹電纜.工作溫度在65℃～260℃之間.第004部分:雙芯鎳鉻/鎳鋁屏蔽電纜和護套電纜.產品 | Aerospace series - Thermocouple extension cable - Operatingtemperatures between p 65 °C to 260 °C - Part 004: Two core nickelchromium/nickel aluminium shielded and jacketed - Product standard |
| BS EN 4051-2002 | 航空航天系列.TI-P64001型鈦合金制、球形、60度管連接器.油口接頭 | Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy - Port connection |
| BS EN 4054-2004 | 航空航天系列.管連接件、松套法蘭和密封件.碳氟化合物橡膠密封件和鋁合金保護殼.技術規范 | Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy - Technical specification |
| BS EN 4056-001-2006 | 航空航天系列.導線電纜扎匝.技術規范 | Aerospace series - Cable ties for harnesses - Technical specification |
| BS EN 4057-100-2006 | 航空航天系列.導線電纜扎匝.試驗方法.總則 | Aerospace series - Cable ties for harnesses - Test methods - General |
| BS EN 4057-201-2005 | 航空航天系列.導線電纜扎匝.試驗方法.外觀檢查 | Cable ties for harnesses — Test methods — Part 201: Visual examination |
| BS EN 4057-202-2005 | 航空航天系列.導線電纜扎匝.試驗方法.質量和尺寸的檢查 | Cable ties for harnesses — Test methods — Part 202: Examination of mass and dimensions |
| BS EN 4057-302-2006 | 航空航天系列.導線電纜扎匝.試驗方法.第302部分:易燃性 | Aerospace Series. Cable Ties for Harnesses. Test Methods. Part 302: Flammability |
| BS EN 4057-303-2005 | 航空航天系列.導線電纜扎匝.試驗方法.防液 | Cable ties for harnesses — Test methods — Part 303: Resistance to fluids |
| BS EN 4057-304-2006 | 航天航空系列.導線電纜扎匝.試驗方法.第304部分:最高工作溫度下的環形抗拉強度 | Aerospace Series. Cable Ties for Harnesses. Test Methods. Part 304: Loop Tensile Strength at Maximum Working Temperature |
| BS EN 4057-305-2005 | 航空航天系列.導線電纜扎匝.試驗方法.染色牢度 | Cable ties for harnesses -- Test methods -- Part 305: Coulor fastness?? |
| BS EN 4057-306-2006 | 航空航天系列.導線電纜扎匝.試驗方法.第306部分:熱老化試驗 | Aerospace Series. Cable Ties for Harnesses. Test Methods. Part 306: Heat Ageing Test |
| BS EN 4057-307-2006 | 航空航天系列.導線電纜扎匝.試驗方法.第307部分:抗紫外線輻射 | Aerospace Series. Cable Ties for Harnesses. Test Methods. Part 307: Resistance to Ultra Violet Radiation |
| BS EN 4057-401-2006 | 航空航天系列.導線電纜扎匝.試驗方法.第401部分:環形抗拉強度 | Aerospace Series. Cable Ties for Harnesses. Test Methods. Part 401: Loop Tensile Strength |
| BS EN 4057-402-2006 | 航空航天系列.導線電纜扎匝.試驗方法.第402部分:壽命周期 | Aerospace Series. Cable Ties for Harnesses. Test Methods. Part 402: Life Cycle |
| BS EN 4057-404-2006 | 航空航天系列.導線電纜扎匝.試驗方法.第404部分:低溫裝置 | Aerospace Series. Cable Ties for Harnesses. Test Methods. Part 404: Low Temperature Installation |
| BS EN 4057-406-2006 | 航空航天系列.導線電纜扎匝.試驗方法.第406部分:鎖緊裝置保持力 | Aerospace Series. Cable Ties for Harnesses. Test Methods. Part 406: Locking Device Retention |
| BS EN 4058-2001 | 航空航天系列.鈦和鈦合金制的焊接用填充桿材和填充金屬絲.直徑為0.5mm 5.0mm.尺寸 | Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0,5 mm D 5,0 mm - Dimensions |
| BS EN 4059-2001 | 航空航天系列.鋼焊接填充線和填充棒.直徑0.5mm和5.0mm.尺寸 | Aerospace series - Filler rods and filler wire for welding in steel - Diameter 0,5 mm D 5,0 mm - Dimensions |
| BS EN 4060-2001 | 航空航天系列.鈦和鈦合金制的焊接用填充桿材和填充金屬絲.直徑為0.5mm 5.0mm.尺寸 | Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter 0,5 mm D 5,0 mm - Dimensions |
| BS EN 4085-2001 | 航空航天系列.鎳基合金 Ni-40002.硬釬焊填充金屬.非晶態箔 | Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Amorphous foil |
| BS EN 4102-2005 | 航空航天系列.鋁合金AL-P2219-T81.覆層薄板和帶材.0.5 mm≤a≤6 mm | Aerospace series - Aluminium alloy AL-P2219-T81 - Clad sheet and strip - 0,5 mm a 6 mm |
| BS EN 4103-2001 | 航空航天系列.鎳基合金NI-B40002(NiSi4B2).釬焊用填充金屬.硼化物箔 | Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Borided foil |
| BS EN 4104-2001 | 航空航天系列.NI-B40002鎳基合金.硬釬焊用填充金屬.粉末或糊料 | Aerospace series - Nickel base alloy NI-B40002 - Filler metal for brazing - Powder or paste |
| BS EN 4108-2006 | 航空航天系列.爪形扳手和電動套筒扳手附件 | Aerospace series — Wrenches, crow foot, attachment socket, socket drive |
| BS EN 4109-2006 | 航空航天系列.平面扳手 | Aerospace series — Wrenches, face spanner |
| BS EN 4110-2006 | 航空航天系列.開端套筒扳手 | Aerospace series — Wrenches, open end, box |
| BS EN 4111-2006 | 航空航天系列.管件的花鍵套筒扳手.技術規范 | Wrenches, splined, sockets, for pipe fittings - Technical specification |
| BS EN 4113-2001 | 航空航天系列.帶橡膠彈性襯料的耐腐蝕鋼制的環形（P型）卡箍.尺寸和質量 | Aerospace series - Clamps, loop (P type) in corrosion resisting steel with rubber cushioning - Dimensions and masses |
| BS EN 4114-2001 | 航空航天系列.帶橡膠襯料的鋁合金環形卡箍("P"型).尺寸和質量 | Aerospace series - Clamps, loop ("P" type) in aluminium alloy with rubber cushioning - Dimensions and masses |
| BS EN 4115-2001 | 航空航天系列.卡箍用橡膠襯料.尺寸和質量 | Aerospace series - Cushion, rubber for clamps - Dimensions, masses |
| BS EN 4116-2004 | 航空航天系列.耐熱鋼FE-PA2601 (A286)制自鎖、帶鍍銀螺紋的六角螺母.等級:1100MPa(室溫)/425℃ | Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification - 1 100 MPa (at ambient temperature) / 425 °C |
| BS EN 4117-2004 | 航空航天系列.十二角頭自鎖緊螺紋鍍銀的耐熱鎳基合金NI-PH 2601(鉻鎳鐵合金718)螺母.等級:1550MPa(室溫)/60 | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification - 1 550 MPa (at ambient temperature) / 600 °C |
| BS EN 4118-2004 | 航空航天系列.耐熱鋼FE-PA2601(A286)制自鎖、帶鍍銀螺紋的十二角螺母.等級:1100MPa(室溫)/650℃ | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification - 1 100 MPa (at ambient temperature) / 650 °C |
| BS EN 4119-2004 | 航空航天系列.耐熱鋼FE-PA2601(A286)制自鎖、深沉頭孔的、帶鍍銀螺紋的十二角螺母.等級:1100MPa(室溫)/650 | Aerospace series - Nuts, bihexagonal, self-locking, deep counterbore, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification - 1 100 MPa (at ambient temperature) / 650 °C |
| BS EN 4121-2004 | 航空航天系列.耐熱鋼FE-A2601(A286)制自鎖、鋸齒、帶鍍銀螺紋的有柄螺母.等級:1100MPa(室溫)/650℃ | Aerospace series - Shank nuts, serrated, self-locking, in heat resisting steel FE- A2601 (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature) /650 °C |
| BS EN 4122-2004 | 航空航天系列.耐熱鋼FE-PA2601(A286)制自鎖、帶鍍銀螺紋的有柄螺母.等級:1100MPa(室溫)/650℃ | Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification - 1 100 MPa (at ambient temperature)/650 °C |
| BS EN 4123-2004 | 航空航天系列.自鎖緊螺紋鍍銀的耐熱鎳基合金NI-PH 2601(鉻鎳鐵合金718)帶柄螺母.等級:1550MPa(室溫)/600 鳦 | Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification - 1 550 MPa (at ambient temperature) / 600 °C |
| BS EN 4124-2004 | 航空航天系列.60 型模用自鎖緊螺紋鍍銀的耐熱鎳基合金NI-PH1302(一種耐高熱鎳基合金)帶柄螺母.等級:1210MP | Aerospace series - Shank nuts, self-locking, heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60 ° swage - Classification - 1 210 MPa (at ambient temperature) / 730 °C |
| BS EN 4158-2006 | 航空航天系列.涂料和清漆.導電層表面電阻測量用試驗方法 | Aerospace series — Paints and varnishes — Test method formeasurement of electrical surface resistance of conductive layers |
| BS EN 4165-012-2005 | 航空航天系列.矩形模塊電連接器.連續工作溫度為175℃.第012部分:系列3模塊2和4的法蘭安裝插座.產品標準 | Connectors, electrical, rectangular, modular - Operating temperature 175 ℃ continuous - Part 012: Flange mounting receptacle 2 and 4 modules, series 3 - Product standard |
| BS EN 4165-013-2005 | 航空航天系列.矩形模塊電連接器.連續工作溫度為175℃.第013部分:系列2和系列3連接器用模塊2和4的電纜夾.產 | Connectors, electrical, rectangular, modular - Operating temperature 175 ℃ continuous??- Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 - Product standard |
| BS EN 4165-014-2005 | 航空航天系列.矩形模塊電連接器.連續工作溫度為175℃.第014部分:系列2和系列3連接器用模塊2和4的屏蔽附件. | Connectors, electrical, rectangular, modular - Operating temperature 175 ℃ continuous - Part 014: Shielded accessory body, 2 and 4 modules for connectors, series 2 and series 3 - Product standard |
| BS EN 4165-015-2005 | 航空航天系列.矩形模塊電連接器.連續工作溫度為175℃.第015部分:附加物用圓形煙囪(每1模塊槽).產品標準 | Connectors, electrical, rectangular, modular - Operating temperature 175 ℃ continuous - Part 015: Round chimney for accessory (1 per module cavity) - Product standard |
| BS EN 4165-016-2005 | 航空航天系列.矩形模塊電連接器.連續工作溫度為175℃.第016部分:附加物用雙橢圓形煙囪(每1個2模塊槽).產品 | Connectors, electrical, rectangular, modular - Operating temperature 175 ℃ continuous - Part 016: Double oval chimney for accessory (1 per 2 modules) - Product standard |
| BS EN 4165-017-2005 | 航空航天系列.矩形模塊電連接器.連續工作溫度為175℃.附加物用空煙囪(每1模塊槽).產品標準 | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Blank chimney for accessory (1 per module cavity) - Product standard |
| BS EN 4165-022-2005 | 航空航天系列.矩形模塊電連接器.連續工作溫度為175℃.第022部分:模塊移除的插入/萃取工具.產品標準 | Connectors, electrical, rectangular, modular - Operating temperature 175 ℃ continuous - Part 022: Insertion/extraction tool for removal of modules - Product standard |
| BS EN 4166-2005 | 航空航天系列.三件彈簧張力夾具.聚四氟乙烯軸襯 | Aerospace series - Clips, spring tension, three parts - PTFE bushes |
| BS EN 4167-2005 | 航空航天系列.三件彈簧張力夾具.耐熱鋼FE-PA2601(A286)內夾具 | Aerospace series - Clips, spring tension, three parts - Inner clips in heat resisting steel FE-PA2601 (A286) |
| BS EN 4168-2005 | 航空航天系列.三件彈簧張力夾具.耐熱鋼FE-PA2601(A286)外夾具 | Aerospace series - Clips, spring tension, three parts - Outer clips in heat resisting steel FE-PA2601 (A286) |
| BS EN 4170-2007 | 航空航天系列.涂料和清漆.防冷裂縫溫度循環測量的試驗方法 | Aerospace series - Paints and varnishes - Test method for measurement of resistance to cold crack temperature cycle |
| BS EN 4172-2006 | 航空航天系列.緊公差TI-P64001陽極電鍍的米制鈦合金桿沉頭、凹頭鎖緊螺栓.分類:1100 MPa / 315 °C（周圍溫 | Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| BS EN 4173-2006 | 航空航天系列.緊公差TI-P64001陽極電鍍的米制鈦合金桿１００°正常頭、凹頭鎖緊螺栓.分類:1100 MPa / 315 | Lockbolts, 100 countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C |
| BS EN 4174-2006 | 航天航空系列.陽極電鍍或鉻酸鹽處理鋁合金2024米制系列、連接模壓鎖緊凹頭緊固件 | Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series |
| BS EN 4175-2005 | 航天航空系列.TI-P99002型鈦合金米制系列、法蘭連接模壓鎖緊切變型墊圈 | Aerospace series - Collars, flanged swage locking, sheartype, in titanium TI-P99002, metric series |
| BS EN 4176-2005 | 航空航天系列.緊公差TI-P64001鈦合金制陽極電鍍或鋁質有色覆層１００°正常或沉頭緊固/凹頭鎖緊螺栓.TI-P99 | Aerospace series - Lockbolts, 100 ° countersunk normal head or protruding head, tension-/ sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metric series - Technical specification |
| BS EN 4179-2005 | 航空航天系列.無損檢驗人員的資格和審批 | Aerospace series - Qualification and approval of personnel for non-destructive testing |
| BS EN 4180-2002 | 航空航天系列.流體用鈦及鈦合金圓形管.寬度公差.直徑為4mm D 40mm.尺寸 | Aerospace series - Circular tubes, for fluids in titanium and titanium alloys - Wide tolerances - Diameter 4 mm D 40 mm - Dimensions |
| BS EN 4182-2001 | 航空航天系列.鈦合金管連接件8°30'.異徑三通管 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees, reduced |
| BS EN 4183-2001 | 航空航天系列.鈦合金管連接件8°30'.90°彎頭焊接端頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 ° welded ends |
| BS EN 4184-2001 | 航空航天系列.鈦合金管連接件8°30'.45°彎頭雙焊接端頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 45 ° double, welded ends |
| BS EN 4185-2001 | 航空航天系列.鈦合金管連接件8°30'.長悶頭三通管 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees, bulkhead on run long |
| BS EN 4186-2001 | 航空航天系列.鈦合金管連接件8°30'.十字形活接頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, cross |
| BS EN 4187-2001 | 航空航天系列.鈦合金管連接件8°30'.90°彎頭長悶頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 °, bulkhead, long |
| BS EN 4188-2001 | 航空航天系列.鈦合金管連接件8°30'.90°彎頭長悶頭焊接端頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Elbows 90 ° bulkhead, long, welded end |
| BS EN 4189-2001 | 航空航天系列.鈦合金8°30'管連接件.帶有長悶頭套管的三通管 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees, bulkhead branch long |
| BS EN 4190-2001 | 航空航天系列.鈦合金管連接件8°30'.在使用的帶止推金屬絲的縮徑三通管 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees, reduced with thrust wire nut on run |
| BS EN 4191-2001 | 航空航天系列.鈦合金管連接件8°30'.縮徑三通管長悶頭分支 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees, reduced, bulkhead branch, long |
| BS EN 4192-2001 | 航空航天系列.鈦合金8°30'管連接件.帶有縮短悶頭套管的三通管 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees, reduced bulkhead branch |
| BS EN 4193-2001 | 航空航天系列.鈦合金8°30'管連接件.帶有異徑長悶頭的三通管 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees, reduced bulkhead on run long |
| BS EN 4194-2001 | 航空航天系列.鈦合金8°30'管連接件.帶有異徑悶頭三通管 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees, reduced, bulkhead |
| BS EN 4199-001-2006 | 航空航天系列.航行器用連接帶.技術規范 | Aerospace series - Bonding straps for aircraft - Technical specification |
| BS EN 4199-002-2006 | 航空航天系列.飛行器用連接帶.產品標準索引 | Aerospace series - Bonding straps for aircraft - Index of product standard |
| BS EN 4199-006-2006 | 航空航天系列.飛行器用壓焊編帶.150℃鍍錫或260℃鍍鎳連接帶用圓形壓焊銅編帶導體.產品標準 | Aerospace series - Bonding straps for aircraft - Round braid copper conductors for bonding straps, tin plated up to 150 °C or nickel plated up to 260 °C - Product standard |
| BS EN 4199-1-2006 | 航空航天系列.飛行器用接線片.技術規范 | Aerospace series - Bonding straps for aircraft - Technical specification |
| BS EN 4202-2005 | 航空航天系列.鋁合金AL-P6082-T651.板材.6 mm≤a≤25 mm | Aerospace series - Aluminium alloy AL-P6082-T651 - Plate - 6 mm a 25 mm |
| BS EN 4203-2005 | 航空航天系列.AL-P8090-T89型鋁合金.薄板材.0.6mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P8090-T89 - Sheet - 0,6 mm <= a <= 6 mm |
| BS EN 4204-2005 | 航空航天系列.AL-P8090-T841型鋁合金.薄板材.0.6mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P8090 - T841 - Sheet - 0,6 mm <= a <= 6 mm |
| BS EN 4209-2005 | 航空航天系列.AL-P2219-T851型鋁合金.厚板材. 6 mm <=50 mm | Aluminium alloy AL-P2219-T851 - Plate - 6 mm ＜a ≤50 mm |
| BS EN 4211-2005 | 航空航天系列.鋁合金AL-P2024-T42.覆層板材.6 mm≤a≤25 mm | Aerospace series - Aluminium alloy AL-P2024-T42 - Clad plate - 6 mm a 25 mm |
| BS EN 4212-2005 | 航空航天系列.鋁合金AL-P5086-H111.板材.6 mm≤a≤80 mm | Aerospace series - Aluminium alloy AL-P5086-H111 - Plate - 6 mm a 80 mm |
| BS EN 4213-2005 | 航空航天系列.鋁合金AL-P6061-T651.板材.6 mm≤a≤80 mm | Aerospace series - Aluminium alloy AL-P6061-T651 - Plate - 6 mm a 80 mm |
| BS EN 4214-2005 | 航空航天系列.鋁合金AL-P7010-T651.板材.6 mm≤a≤20 mm | Aerospace series - Aluminium alloy AL-P7010-T651 - Plate - 6 mm a 20 mm |
| BS EN 4215-2005 | 航空航天系列.鋁合金AL-P7175-T651.板材.6 mm≤a≤80 mm | Aerospace series - Aluminium alloy AL-P7175-T651 - Plate - 6 mm a 80 mm |
| BS EN 4233-2001 | 航空航天系列.鈦合金管連接件8°30'.帶螺紋的焊接活接頭 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, welded, threaded |
| BS EN 4234-2006 | 航空航天系列.蝸桿傳動夾具.尺寸和質量 | Aerospace series - Clamps, worm drive - Dimensions, masses |
| BS EN 4247-2005 | 航空航天系列.鋁合金AL-P2024-T42.板材.6 mm≤a≤140 mm | Aerospace series - Aluminium alloy AL-P2024-T42 - Plate - 6 mm a 140 mm |
| BS EN 4250-2001 | 航空航天系列.鎳基合金NI-B41001(NiCr19Si7B).硬釬焊填充金屬.非晶質箔材 | Aerospace series - Nickel base alloys NI-B41001 (NiCr19Si7B) - Filler metal for brazing - Amorphous foil |
| BS EN 4267-2001 | 航空航天系列.鈦和鈦合金制的圓形棒材.直徑為6mm 160mm.尺寸 | Aerospace series - Round bar in titanium and titanium alloys - Diameter 6 mm D 160 mm - Dimensions |
| BS EN 4283-2005 | 航空航天系列.AL-P2219-T87型鋁合金.板材.6mm≤a≤40mm | Aerospace series - Aluminium alloy AL-P2219-T87 - Plate - 6 mm < a <= 40 mm |
| BS EN 4286-2005 | 航空航天系列.鋁合金AL-P8090-T89.模鍛件.a≤125 mm | Aerospace series - Aluminium alloy AL-P8090-T89 - Die forgings - a 125 mm |
| BS EN 4287-2005 | 航天航空系列.AL-P7010型鋁合金.鍛坯件 | Aerospace series - Aluminium alloy AL-P7010 - Forging stock |
| BS EN 4291-2005 | 航空航天系列.鋁合金AL-P8090.鍛造坯料 | Aerospace series - Aluminium alloy AL-P8090 - Forging stock |
| BS EN 4292-2005 | 航空航天系列.鋁合金AL-R39002.鍛造坯料 | Aerospace series - Aluminium alloy AL-R39002 - Forging stock |
| BS EN 4303-2005 | 航空航天系列.帶鈍化(壁厚為0.25mm)耐腐蝕鋼制埋頭拉伸螺釘用管形套管 | Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness) |
| BS EN 4313-2005 | 航空航天系列.鋁合金AL-P6013-T6.薄板和帶材.0.5 mm≤a≤6 mm | Aerospace series - Aluminium aloy AL-P6013-T6 - Sheet and strip - 0,5 mm a 6 mm |
| BS EN 4321-2004 | 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金 718)制的帶安全鎖線孔、細桿、長螺紋、鍍銀的雙六角頭螺栓 | Aerospace series - Bolts, double hexagon head with lockwire holes , relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification - 1 550 Mpa (at ambient temperature)/650 °C |
| BS EN 4322-2004 | 航空航天系列.鈦合金TI-P64001制的帶安全鎖線孔、細桿、長螺紋、陽極氧化、鍍MoS2的雙六角頭螺栓.強度等級. | Aerospace series - Bolts, double hexagon head with lockwire holes , relieved shank, long thread, in titanium alloy TI-P64001, anodized , MoS2 coated - Strength class - 1 100 MPa (at ambient temperature) |
| BS EN 4323-2004 | 航空航天系列.鈦合金TI-P64001制的六瓣凹槽、全桿螺紋、陽極氧化、鍍MoS2的100 沉頭螺釘.分類.900MPa(室溫 | Aerospace series - Screws, 100 ° countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoS2 coated - Classification - 900 MPa (at ambient temperature) / 350 °C |
| BS EN 4324-2002 | 航空航天系列.AL-W42201鋁合金.焊接用填充金屬.焊條 | Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding - Rod |
| BS EN 4325-2001 | 航空航天系列.耐熱合金NI-WH1302(NiCr20Co13Mo4Ti3Ai).焊接填充金屬.金屬絲和焊條 | Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3AI) - Filler metal for welding - Wire and rod |
| BS EN 4326-2001 | 航空航天系列.耐熱合金CO-WH4102(CoCr28W20Ni5V1).硬釬焊用填充金屬.金屬絲和焊條 | Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding - Wire and rod |
| BS EN 4327-2001 | 航空航天系列.耐熱合金CO-WH1401(CoCr26Ni11W8).硬釬焊用填充金屬.金屬絲和焊條 | Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding - Wire and rod |
| BS EN 4328-2002 | 航空航天系列.FE-WM1601鋼 (X18CrWNi13-3-2).焊接用填充金屬.焊絲和焊條 | Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2) - Filler metal for welding - Wire and rod |
| BS EN 4329-2001 | 航空航天系列.耐熱合金NI-WH0001(NiCr20).焊接填充金屬.金屬絲和焊條 | Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding - Wire and rod |
| BS EN 4330-2002 | 航空航天系列.FE-WA4802鋼 (X8CrNiMn27-22-2).焊接用填充金屬.焊絲和焊條 | Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2) - Filler metal for welding - Wire and rod |
| BS EN 4331-2002 | 航空航天系列.FE-WL1804鋼 (25CrMnMo4-2-2).焊接用填充金屬.焊絲和焊條 | Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding - Wire and rod |
| BS EN 4332-2002 | 航空航天系列.FE-WL1805鋼 (8CrMnMo12-4-9). 焊接用填充金屬.焊絲和焊條 | Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding - Wire and rod |
| BS EN 4333-2002 | 航空航天系列.FE-WA4902鋼 (X5CrNiCoMoWMn21-20-20-3-3-2). 焊接用填充金屬.焊絲和焊條 | Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal for welding - Wire and rod |
| BS EN 4334-2002 | 航空航天系列.FE-WL1806鋼 (15CrMnMoV5-4-9-3). 焊接用填充金屬.焊絲和焊條 | Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding - Wire and rod |
| BS EN 4335-2002 | 航空航天系列.FE-WA2602鋼 (X4NiCrTiMoV26-15). 焊接用填充金屬.焊絲和焊條 | Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding - Wire and rod |
| BS EN 4336-2002 | 航空航天系列.FE-WA3801鋼 (X4CrNiMn20-10-2). 焊接用填充金屬.焊絲和焊條 | Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2) - Filler metal for welding - Wire and rod |
| BS EN 4337-2001 | 航空航天系列.耐熱合金NI-WH8901(NiCr16Ti3Mn2).硬釬焊用填充金屬.金屬絲和焊條 | Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn2) - Filler metal for welding - Wire and rod |
| BS EN 4338-2001 | 航空航天系列.耐熱合金NI-WH3902(NiCr25Mo10C).硬釬焊用填充金屬.金屬絲和焊條 | Aerospace series - Heat resisting alloy - NI-WH3902 (NiCr25Mo10C) - Filler metal for welding - Wire and rod |
| BS EN 4339-2001 | 航空航天系列.耐熱合金CO-WH4001(CoCr29W9).硬釬焊用填充金屬.金屬絲和焊條 | Aerospace series - Heat resisting alloy CO-WH4001 (CoCr29W9) - Filler metal for welding - Wire and rod |
| BS EN 4340-2002 | 航空航天系列.MG-W68001鎂合金鋼. 焊接用填充金屬.焊絲和焊條 | Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding - Wire and rod |
| BS EN 4341-2001 | 航空航天系列.鋁合金AL-W46431.焊接填充金屬.金屬絲和焊條 | Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding - Wire and rod |
| BS EN 4342-2001 | 航空航天系列.鈦Ti-W99001.焊接填充金屬.金屬絲和焊條 | Aerospace series - Titanium TI-W99001 - Filler metal for welding - Wire and rod |
| BS EN 4343-2002 | 航空航天系列.FE-WM1001 ( X13Cr12 )鋼. 焊接用填充金屬.焊絲和焊條 | Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding - Wire and rod |
| BS EN 4344-2001 | 航空航天系列.鋼FE-WM1002(X13Cr13).硬釬焊用填充金屬.金屬絲和焊條 | Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding - Wire and rod |
| BS EN 4352-2004 | 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金 718)制帶安全鎖線孔、細桿、長螺紋、鍍MoS2 的雙六角頭螺 | Aerospace series - Bolts, double hexagon head with lockwire holes , relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification - 1 550 MPa (at ambient temperature) / 425 °C |
| BS EN 4354-2006 | 航空航天系列.梅花沖頭.釋放旋具 | Aerospace series - Six lobe recess - Drivers, relieved |
| BS EN 4356-2006 | 航空航天系列.梅花沖頭.短旋具 | Aerospace series - Six lobe recess - Drivers, short |
| BS EN 4357-2006 | 航空航天系列.梅花沖頭.旋具柄 | Aerospace series - Six lobe recess - Drivers, handle |
| BS EN 4358-2006 | 航空航天系列.梅花沖頭.雙端90度旋具 | Aerospace series - Six lobe recess - Drivers, double ended, 90 |
| BS EN 4359-2006 | 航空航天系列.梅花沖頭.花扳子.技術規范 | Aerospace series - Six lobe recess - Drivers - Technical specification |
| BS EN 4382-2006 | 航空航天系列.NI-PH3601(NiCr22Mo9Nb)型耐熱合金.溶解處理的.無縫管.液壓用.D≤50mm、a≤3mm | Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated - Seamless tubes - For hydraulic application - D ≤ 50 mm, a ≤ 3 mm |
| BS EN 4383-2006 | 航空航天系列.NI-CH2601(NiCr19Fe19Nb5Mo3)型耐熱合金.非熱處理的.重熔坯料 | Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock |
| BS EN 4401-2006 | 航空航天系列.緊公差TI-P64001鋁制有色覆層的米制鈦合金桿沉頭、凹頭鎖緊螺栓.分類:1100 MPa / 315 °C（周 | Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C |
| BS EN 4402-2006 | 航空航天系列.緊公差TI-P64001鋁制有色覆層的米制鈦合金桿１００°正常頭、凹頭鎖緊螺栓.分類:1100 MPa / 3 | Lockbolts, 100 °countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001,with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C |
| BS EN 4406-2006 | 航空航天系列.顏料和清漆.雙組分冷固化聚氨酯涂料.耐磨性 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane coating - Abrasion resistant |
| BS EN 4408-1-2005 | 航空航天系列.技術制圖.復合材料部件表示法.總則 | Aerospace series - Technical drawings - Representation of parts made of composite materials - General rules |
| BS EN 4408-2-2005 | 航空航天系列.技術制圖.復合材料部件表示法.疊層部件 | Aerospace series - Technical drawings - Representation of parts made of composite materials - Laminated parts |
| BS EN 4408-3-2005 | 航空航天系列.技術制圖.復合材料部件表示法.含磁鐵心材料的部件 | Aerospace series - Technical drawings - Representation of parts made of composite materials - Parts including core materials |
| BS EN 4408-4-2005 | 航空航天系列.技術制圖.復合材料制部件的表示法.纏繞式產品 | Aerospace series - Technical drawings - Representation of parts made of composite materials - Items obtained by winding |
| BS EN 4408-5-2005 | 航空航天系列.技術制圖.復合材料部件表示法.接縫 | Aerospace series - Technical drawings - Representation of parts made of composite materials - Seams |
| BS EN 4408-6-2005 | 航空航天系列.技術制圖.復合材料部件表示法.預型件 | Aerospace series - Technical drawings - Representation of parts made of composite materials - Preforms |
| BS EN 4420-2003 | 航空航天系列.FE-PA3903型合金鋼制彈簧夾 | Aerospace series - Clips, spring tension, in alloy steel FE-PA3903 |
| BS EN 4421-2007 | 航空航天系列.帶鋸齒狀、耐腐蝕鋼鎖緊環的、鍍MoS2涂層的、TI-P64001鈦合金螺柱.強度等級:1100MPa(環境溫度 | Aerospace series - Studs, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel - Strength class: 1 100 MPa (at ambient temperature) |
| BS EN 4434-2005 | 航空航天系列.電纜的銅和銅合金輕型導體.產品質量（正常和緊公差） | Copper or copper alloy lightweight conductors for electrical cables — Product standard (Normal and tight tolerances) |
| BS EN 4450-2005 | 航空航天系列.鋁合金AL-P7050-T762.薄板.0.8 mm≤a≤6 mm | Aerospace series - Aluminium alloy AL-P7050-T762 - Sheet - 0,8 mm a 6 mm |
| BS EN 4458-2005 | 航空航天系列.帶鋸齒狀鎖緊環耐腐蝕鋼鍍MoS2涂層的TI-P64001型鈦合金MJ螺紋螺柱.強度等級:1100MPa(室溫).技 | Aerospace series - Studs, MJ threads, in titanium alloy TI-P64001 , MoS2 coated, with serrated locking ring in corrosion resisting steel.Strengt h class: 1100 MPa (at ambient temperature) - Technicalspecification |
| BS EN 4459-2005 | 航空航天系列.鈦合金TI-P64001制帶鋸齒型鎖環的耐腐鋼螺柱.設計標準 | Aerospace series - Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel - Design standard |
| BS EN 4460-2005 | 航空航天系列.鈦合金TI-P64001制帶鋸齒型鎖環的耐腐鋼螺柱.安裝和拆卸程序 | Aerospace series - Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel - Installation and removal procedure |
| BS EN 4494-2006 | 航空航天系列.不銹鋼開口環 | Aerospace series - Rings, split, in stainless steel |
| BS EN 4496-2005 | 航空航天系列.有色鋁涂層、陽極化的、鈦合金、短螺紋、緊公差標稱桿、偏位十字凹槽沉頭標稱100 °螺釘.等級 | Aerospace series - Screws, 100 ° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| BS EN 4497-2005 | 航空航天系列.有色鋁涂層、陽極化的、鈦合金、短螺紋、緊公差標稱桿、偏位十字凹槽盤頭螺釘.等級:1100MPa( | Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| BS EN 4498-2005 | 航空航天系列.有色鋁涂層、鈍化的、耐熱鎳基合金、中等長度螺紋、緊公差標稱桿、大雙六角頭螺栓.等級:1550M | Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating - Classification: 1 550 MPa (at ambient temperature) / 315 °C |
| BS EN 4501-2006 | 航空航天系列.帶鍍鋁涂層的陽極電鍍鈦合金短螺紋緊公差標準柄正六角頭螺栓、米制系列.等級:1100MPa(室溫)/3 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C |
| BS EN 4509-2006 | 航空航天系列.帶鍍鋁涂層陽極氧化的鈦合金螺紋延伸到螺頭100°沉頭偏置十字凹槽螺釘、米制系列.等級:1100MP | Screws, 100 ° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature)/315 °C |
| BS EN 4529-001-2006 | 航空航天系列.電氣及光學連接元件.密封塞子.技術規范 | Aerospace series - Elements of electrical and optical connection - Sealing plugs - Technical specification |
| BS EN 4529-002-2006 | 航空航天系列.電氣和光學連接元件.密封塞.產品標準索引 | Aerospace series - Elements of electrical and optical connection - Sealing plugs - Index of product standards |
| BS EN 4529-003-2006 | 航空航天系列.電氣及光學連接元件.密封塞.T級產品標準 | Aerospace series - Elements of electrical and optical connection - Sealing plugs - Class T. Product standard |
| BS EN 4530-001-2006 | 航空航天系列.連接部件用密封套.技術規范 | Aerospace series - Sealing sleeves used in elements of connection - Technical specification |
| BS EN 4530-002-2006 | 航空航天系列.連接元件用密封套.密封套的列表和使用 | Aerospace series - Sealing sleeves used in elements of connection - List and utilization of sealing sleeves |
| BS EN 4530-005-2006 | 航空航天系列.連接部件用密封套.第005部分:3mm～4.1mm外直徑電纜用密封套.產品標準 | Aerospace series - Sealing sleeves used in elements of connection - Part 005: Sealing sleeves for external diameter cable 3 mm to 4,1 mm - Product standard |
| BS EN 4530-006-2006 | 航空航天系列.連接部件用密封套.第006部分:4.68mm～5.05mm外直徑電纜用密封套.產品標準 | Aerospace series - Sealing sleeves used in elements of connection - Part 006: Sealing sleeves for external diameter cable 4,68 mm to 5,05 mm - Product standard |
| BS EN 4533-001-2006 | 航空航天系列.纖維光學系統.手冊.終端法和工具 | Aerospace series - Fibre optic systems - Handbook - Termination methods and tools |
| BS EN 4533-002-2006 | 航空航天系列.纖維光學系統.手冊.試驗和測量 | Aerospace series - Fibre optic systems - Handbook - Test and measurement |
| BS EN 4533-003-2006 | 航空航天系列.纖維光學系統.手冊.航行燈和設備的使用 | Aerospace series - Fibre optic systems - Handbook - Looming and installation practices |
| BS EN 4533-004-2006 | 航空航天系列.纖維光學系統.手冊.修理、維護和檢測 | Aerospace series - Fibre optic systems - Handbook - Repair, maintenance and inspection |
| BS EN 4549-2003 | 航空航天系列.耐熱鋼或耐熱鎳合金管連接件.焊接連接端.設計造型.英制 | Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel alloy - Coupling end, welded - Design configuration - Inch series |
| BS EN 4550-1-2003 | 航空航天系列.37度管連接件.設計造型.英制.凸形密封球端 | Aerospace series - Pipe coupling 37° - Design configuration - Inch series - Male sealing ends, spherical |
| BS EN 4550-2-2003 | 航空航天系列.37度管連接件.設計造型.英制.管端 | Aerospace series - Pipe coupling 37 °. Design configuration - Inch series - Port ends |
| BS EN 4550-3-2003 | 航空航天系列.管連接件37度.設計造型.英制.管孔連接件 | Aerospace series - Pipe coupling 37 °. Design configuration - Inch series - Port connections |
| BS EN 4550-4-2003 | 航空航天系列.37度管連接件.設計造型.英制.管的承口密封端 | Aerospace series - Pipe coupling 37 °. Design configuration - Inch series - Female sealing ends |
| BS EN 4551-2003 | 航空航天系列.耐熱鋼制37 管聯接器.回轉螺帽.英制 | Aerospace series - Pipe coupling 37 °, in heat resisting steel - Swivel nuts - Inch series |
| BS EN 4552-2003 | 航空航天系列.耐熱鋼制球面37 管聯接器.端部焊接的直管接頭.英制 | Aerospace series - Pipe coupling 37 °, spherical, in heat resisting steel - Straight nipples, welded end - Inch series |
| BS EN 4553-2003 | 航空航天系列.耐熱鋼制球面37 管聯接器.端部焊接的90 彎頭管接頭.英制 | Aerospace series - Pipe coupling 37 °, spherical, in heat resisting steel - Elbow 90 ° nipples, welded end - Inch series |
| BS EN 4554-2003 | 航空航天系列.耐熱鋼制球面37 管聯接器.螺紋式直活管節.英制 | Aerospace series - Pipe coupling 37 °, spherical, in heat resisting steel - Straight unions, threaded - Inch series |
| BS EN 4555-2003 | 航空航天系列.耐熱鋼制37 管聯接器.端部焊接的金屬箍.英制 | Aerospace series - Pipe coupling 37 °, in heat resisting steel - Ferrules, welded end - Inch series |
| BS EN 4556-2003 | 航空航天系列.耐熱鋼制37 管聯接器.蓋組件.英制 | Aerospace series - Pipe coupling 37 °, in heat resisting steel - Cap assemblies - Inch series |
| BS EN 4557-2003 | 航空航天系列.耐熱鋼制球面37 管聯接器.端部焊接的T形管接頭.英制 | Aerospace series - Pipe coupling 37 °, spherical, in heat resisting steel - Tees nipples, welded end - Inch series |
| BS EN 4560-2003 | 航空航天系列.最高達2100kPa的球形37 管聯接器.英制.技術規范 | Aerospace series - Pipe coupling 37 °, spherical, up to 21000 kPa - Inch series - Technical specification |
| BS EN 4561-2003 | 航空航天系列.耐熱鋼制焊接管聯接器.90 彎頭.英制 | Aerospace series - Pipe coupling, welded, in heat resisting steel - Elbow 90 °. Inch series |
| BS EN 4562-2003 | 航空航天系列.耐熱鋼制焊接管聯接器.變徑管.英制 | Aerospace series - Pipe coupling, welded, in heat resisting steel - Reductors - Inch series |
| BS EN 4563-2003 | 航空航天系列.耐熱鋼制焊接管聯接器.三通管.英制 | Aerospace series - Pipe coupling, welded, in heat resisting steel - Tees - Inch series |
| BS EN 4585-2003 | 航空航天系列.彈簧夾.技術規范 | Aerospace series - Clips, spring tension - Technical specification |
| BS EN 4588-2007 | 航空航天系列.涂料和清漆.防滑雙組分冷加工聚氨酯涂料 | Aerospace series - Paints and varnishes - Two component, cold curing polyurethane paint, anti slip |
| BS EN 4590-2005 | 航空航天系列.耐腐蝕鋼制鈍化、自鎖盤頭螺母用金屬片彈簧固定器 | Aerospace series - Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated |
| BS EN 4591-2005 | 航空航天.耐高溫鎳基合金鋼制MOS2潤滑的自調準筒形游動自鎖螺母.等級為:1550 MPa (環境溫度) / 315 °C | Aerospace series - Nuts, barrel, self-locking, floating, self-aligning,in heat resisting nickel base alloy, MoS2 lubricated - Classification: 15 50 MPa (at ambient temperature) / 315 °C |
| BS EN 4592-2006 | 航空航天系列.顏料和清漆.紅外反射率的測量用試驗方法 | Aerospace series - Paints and varnishes - Test method for determination of infrared reflectance |
| BS EN 4604-001-2006 | 航空航天系列.信號傳輸用電纜.技術規范 | Aerospace series - Cable, electrical, for signal transmission - Technical specification |
| BS EN 4604-002-2006 | 航空航天系列.信號傳輸用電纜.總則 | Aerospace series - Cable, electrical, for signal transmission - General |
| BS EN 4608-001-2006 | 航空航天系列.耐火電纜.單股和多股屏蔽的(辮成麻花狀的)和帶護套的多芯組件.工作溫度為-65℃～260℃.技術規 | Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between -65 °C and 260 °C - Technical specification |
| BS EN 4608-002-2006 | 航空航天系列.耐火電纜.單股和多股屏蔽的(辮成麻花狀的)和帶護套的多芯組件.工作溫度為-65℃～260℃.總則 | Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between -65 °C and 260 °C - General |
| BS EN 4610-2005 | 航空航天系列.8°30'鈦合金管接頭.帶推進線螺母的45°彎頭 | Pipe coupling 8°30' in titanium alloy — Elbows 45°, with thrust wire nut |
| BS EN 4615-2005 | 航空航天系統.MG-C18002鎂合金.T4.砂型鑄造 | Aerospace series - Magnesium alloy MG-C18002 - T4 - Sand casting |
| BS EN 4616-2005 | 航天航空系列.鎂合金MG-C18002.T4.冷型鑄造 | Magnesium alloy MG-C18002 - T4 - Chill casting |
| BS EN 4617-2006 | 航空航天系列.標準化企業標準的推薦規程 | Recommended practices for standardizing company standards |
| BS EN 50389-2005 | 航天產品保證.高可靠性電連接器的線繞 | Space product assurance - Wire-wrapping of high reliability electrical connections |
| BS EN 9100-2003 | 航空航天系列.質量管理體系.要求(基于ISO 9001-2000)和質量體系.設計、開發、生產、安裝和維修的質量保證模 | Aerospace series - Quality management systems - Requirements (based on ISO 9001:2000) and quality systems - Model for quality assurance in design, development, production, installation and servicing (based on ISO 9001:1994) |
| BS EN 9102-2006 | 航空航天系列.質量系統.重要部件的檢驗 | Aerospace series - Quality systems - First article inspection |
| BS EN 9103-2005 | 航空航天系列.質量管理體系.關鍵特性的變化管理 | Aerospace series - Quality management systems - Variation management of key characteristics |
| BS EN 9104-2006 | 航空航天系列.質量管理體系.航空航天質量管理體系認證/注冊程序的要求 | Aerospace series - Quality management systems - Requirements for aerospace quality management system certification/ registrations programs |
| BS EN 9110-2005 | 航空航天系列.質量體系.適用于維修機構的質量保證模型 | Aerospace series - Quality systems - Model for quality assurance applicable to maintenance organizations |
| BS EN 9111-2005 | 航空航天系列.質量管理體系.適用于維修機構的評估 | Aerospace series - Quality management systems - Assessment applicable to maintenance organizations |
| BS EN 9120-2005 | 航空航天系列.質量管理體系.零售分銷商的要求 | Aerospace series - Quality management systems - Requirements for stockist distributors |
| BS EN 9121-2005 | 航空航天系列.質量管理體系.用于銷售商的評估 | Aerospace series - Quality management systems - Assessment applicable to stockist distributors |
| BS EN 9132-2006 | 航空航天系列.質量管理系統.部件標記用數據矩陣質量要求 | Aerospace series - Quality management systems - Data matrix quality requirements for parts marking |
| BS EN 9133-2004 | 航空航天系列.質量管理體系.航空航天標準部件的質量鑒定程序 | Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts |
| BS EN ISO 14620-1-2003 | 航天系統.安全要求.系統安全 | Space systems - Safety requirements - System safety |
| BS EN ISO 16091-2003 | 航天系統.統一的后勤支持 | Space systems - Integrated logistic support |
| BS EN ISO 17666-2003 | 航天系統.風險管理 | Space systems - Risk management |
| BS EN ISO 21351-2005 | 航天系統.功能和技術規范 | Space systems - Functional and technical specifications |
| BS F 131-1986 | 航空航天用氯磺化聚乙烯橡膠涂層尼龍織物(300g/m)規范 | Specification for chlorosulphonated polyethylene rubber coated nylon fabric (300 g/m2) for aerospace purposes |
| BS F 133-1988 | 航空航天用經編尼龍織物規范 | Specification for warp knitted nylon fabric for aerospace purposes |
| BS F 136-1989 | 航空航天用氯磺化聚乙烯橡膠涂層尼龍織物(190g/m**2)規范 | Specification for pigmented chlorosulphonated polyethylene rubber-coated nylon fabric (190 g/m2) for aerospace purposes |
| BS F 138-1991 | 航空航天用聚酯纖維平紋(線軸)網規范 | Specification for polyester plain (bobbin) netting suitable for aerospace purposes |
| BS F 139-1989 | 航空航天用滲鋁聚氯丁橡膠的尼龍織物(350g/m**2)規范 | Specification for aluminized polychloroprene rubber-coated nylon fabric (350 g/m2) for aerospace purposes |
| BS F 141-1992 | 航空航天用密織棉纖維(L28和L34)規范 | Specification for closely woven cotton fabrics (L28 and L34) for aerospace purposes |
| BS F 143-1993 | 航空航天用對位芳族聚酰編織繩規范 | Specification for para-aramid braided cords for aerospace purposes |
| BS G 264-2005 | 航空航天系列.航空電子數據傳輸接口系統規范.輔助總線 | Aerospace series - Specification for Avionic data transmission interface systems - Utilities bus |
| BS ISO 10299-2001 | 航空航天.實心鉚釘.材料和米制的標示 | Aerospace - Rivets, solid - Material and metric series identification |
| BS ISO 10792-1-1996 | 航空和航天.帶自潤滑襯瓦的耐腐蝕鋼機體球面滑動軸承.公制系列 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Metric series |
| BS ISO 10792-2-1996 | 航空和航天.帶自潤滑襯瓦的耐腐蝕鋼機體球面滑動軸承.英制系列 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Inch series |
| BS ISO 10792-3-1996 | 航空和航天.帶自潤滑襯瓦的耐腐蝕鋼機體球面滑動軸承.技術規范 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Technical specification |
| BS ISO 10959-2000 | 航空航天.MJ螺紋.量規測量 | Aerospace - MJ threads - Gauging |
| BS ISO 12277-2000 | 航空航天..等級為:1100 MPa(環境溫度)/120℃、1100 MPa(環境溫度)/235℃和1100 MPa(環境溫度)/425℃，帶沉 | Aerospace - Gang channel, self-locking, floating, standard series , with counterbore, classifications - 1100 MPa (at ambient temperature)/120 °C, 1100 MPa (at ambient temperature)/235 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions |
| BS ISO 12319-2006 | 航空航天.'P'(環形)夾具.獲取規范 | Aerospace - 'P' (loop style) clamps - Procurement specification |
| BS ISO 12333-2000 | 航空航天.定量液壓馬達.35000KPa系統的一般規范 | Aerospace - Constant displacement hydraulic motors - General specifications for 35000 kPa systems |
| BS ISO 12334-2000 | 航空航天.液壓的壓力補償?shù)淖兞枯斔捅?35000KPa系統的一般要求 | Aerospace - Hydraulic, pressure-compensated, variable delivery pumps - General requirements for 35000 kPa systems |
| BS ISO 14275-2002 | 航空航天.加肋的偏置十字形內傳動改錐.米制系列 | Aerospace - Drives, internal, offset cruciform, ribbed - Metric series |
| BS ISO 14276-2002 | 航空航天.內偏置十字槽頭改錐.米制系列 | Aerospace - Drives, internal, offset cruciform - Metric series |
| BS ISO 14277-2002 | 航空航天.內偏置十字槽加肋或不加肋的傳動裝置的加肋改錐.米制系列 | Aerospace - Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives - Metric series |
| BS ISO 14278-2002 | 航空航天.內偏置十字槽加肋或無肋傳動裝置的量規.米制系列 | Aerospace - Gauges, for internal offset cruciform ribbed or unribbed drives - Metric series |
| BS ISO 14279-2002 | 航空航天.內十字槽傳動裝置.米制系列 | Aerospace - Drives, internal, cruciform - Metric series |
| BS ISO 14280-2002 | 航空航天.內十字槽加肋或無肋傳動裝置的加肋改錐.米制系列 | Aerospace - Drivers, ribbed, for internal cruciform ribbed or unribbed drives - Metric series |
| BS ISO 14281-2002 | 航空航天.內十字加肋或無肋傳動裝置的量規.米制系列 | Aerospace - Gauges, for internal cruciform ribbed or unribbed drives - Metric series |
| BS ISO 14300-2-2002 | 航空航天系列.程序管理.產品保證程序 | Space systems - Programme management - Product assurance |
| BS ISO 14302-2003 | 航空航天系列.航天系統.電磁兼容性要求 | Aerospace series - Space systems - Electromagnetic compatibility requirements |
| BS ISO 14303-2002 | 航天系統.航天運載工具與航天器的接口 | Space systems - Launch-vehicle-to-spacecraft interfaces |
| BS ISO 14619-2004 | 航天系統.航天試驗.一般要求 | Space systems - Space experiments - General requirements |
| BS ISO 14621-2-2004 | 航天系統.電氣、電子和機電部件.控制程序要求 | Space systems - Electrical, electronic and electromechanical (EEE) parts - Control programme requirements |
| BS ISO 14623-2004 | 航天系統.壓力容器和壓力構件.設計和操作 | Space systems - Pressure vessels and pressurized structures - Design and operation |
| BS ISO 14624-2-2004 | 航天系統.材料的安全和兼容性.電線絕緣和附屬材料易燃性的測定 | Space systems - Safety and compatibility of materials - Determination of flammability of electrical-wire insulation and accessory materials |
| BS ISO 14624-3-2006 | 航天系統.材料的安全性和兼容性.材料和附屬物品產生的廢氣物測定 | Space systems - Safety and compatibility of materials - Determination of offgassed products from materials and assembled articles |
| BS ISO 14624-4-2004 | 航天系統.材料的安全和兼容性.加壓氣態氧或富氧環境下材料向上易燃性的測定 | Space systems - Safety and compatibility of materials - Determination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched environments |
| BS ISO 14624-5-2006 | 航天系統.材料的安全和兼容性.航空航天推進器的系統/組件材料的活性測定 | Space systems - Safety and compatibility of materials - Determination of reactivity of system/component materials with aerospace propellants |
| BS ISO 14624-6-2006 | 航天系統.材料的安全和兼容性.航空航天流體的加工材料的活性測定 | Space systems - Safety and compatibility of materials - Determination of reactivity of processing materials with aerospace fluids |
| BS ISO 14624-7-2006 | 航天系統.材料的安全和兼容性.航空航天流體材料穿透率和滲透性的測定 | Space systems - Safety and compatibility of materials - Determination of permeability and penetration of materials to aerospace fluids |
| BS ISO 14711-2003 | 航天系統.不載人飛行任務執行概念.定義和評定概念產品指南 | Space systems - Unmanned mission operations concepts - Guidelines for defining and assessing concept products |
| BS ISO 14721-2003 | 航天數據和信息傳輸系統.開放式檔案信息系統.參考模式 | Space data and information transfer systems - Open archival information systems - Reference model |
| BS ISO 14950-2004 | 航天系統.不載人航天器的可操作性 | Space systems - Unmanned spacecraft operability |
| BS ISO 14951-1-1999 | 航天系統.流體特性.氧氣 | Space systems - Fluid characteristics - Oxygen |
| BS ISO 14951-10-1999 | 航天系統.流體特性.水 | Space systems - Fluid characteristics - Water |
| BS ISO 14951-11-1999 | 航天系統.流體特性.氨 | Space systems - Fluid characteristics - Ammonia |
| BS ISO 14951-12-1999 | 航天系統.流體特性.二氧化碳 | Space systems - Fluid characteristics - Carbon dioxide |
| BS ISO 14951-13-1999 | 航天系統.流體特性.呼吸用空氣 | Space systems - Fluid characteristics - Breathing air |
| BS ISO 14951-2-1999 | 航天系統.流體特性.氫推進劑 | Space systems - Fluid characteristics - Hydrogen propellant |
| BS ISO 14951-3-1999 | 航天系統.流體特性.氮 | Space systems - Fluid characteristics - Nitrogen |
| BS ISO 14951-4-1999 | 航天系統.流體特性.氦 | Space systems - Fluid characteristics - Helium |
| BS ISO 14951-5-1999 | 航天系統.流體特性.四氧化氮推進劑 | Space systems - Fluid characteristics - Nitrogen tetroxide propellant |
| BS ISO 14951-6-1999 | 航天系統.流體特性.一甲基聯氨推進劑 | Space systems - Fluid characteristics - Monomethylhydrazine propellant |
| BS ISO 14951-7-1999 | 航天系統.流體特性.聯氨推進劑 | Space systems - Fluid characteristics - Hydrazine propellant |
| BS ISO 14951-8-1999 | 航天系統.流體特性.煤油推進劑 | Space systems - Fluid characteristics - Kerosene propellant |
| BS ISO 14951-9-1999 | 航天系統.流體特性.氬 | Space systems - Fluid characteristics - Argon |
| BS ISO 14952-1-2004 | 航天系統.液體系統的表面清潔度.詞匯 | Space systems - Surface cleanliness of fluid systems - Vocabulary |
| BS ISO 14952-2-2004 | 航天系統.液體系統的表面清潔度.清潔度等級 | Space systems - Surface cleanliness of fluid systems - Cleanliness levels |
| BS ISO 14952-3-2004 | 航天系統.液體系統的表面清潔度.不揮發性殘流物和顆粒污染物的測定用分析程序 | Space systems - Surface cleanliness of fluid systems - Analytical procedures for the determination of nonvolatile residues and particulate contamination |
| BS ISO 14952-4-2004 | 航天系統.液體系統的表面清潔度.粗略清潔過程 | Space systems - Surface cleanliness of fluid systems - Rough-cleaning processes |
| BS ISO 14952-5-2004 | 航天系統.液體系統的表面清潔度.干燥過程 | Space systems - Surface cleanliness of fluid systems - Drying processes |
| BS ISO 14952-6-2004 | 航天系統.液體系統的表面清潔度.精確清潔過程 | Space systems - Surface cleanliness of fluid systems - Precision-cleaning processes |
| BS ISO 14953-2000 | 航天系統.結構設計.運載火箭靜態限定試驗用負載水平的測定 | Space systems - Structural design - Determination of loading levels for static qualification testing of launch vehicles |
| BS ISO 15389-2004 | 航天系統.飛行著陸脫落插頭 | Space systems - Flight-to-ground umbilicals |
| BS ISO 15390-2004 | 航天環境(自然和人工).星系宇宙射線模型 | Space environment (natural and artificial) - Galactic cosmic ray model |
| BS ISO 1540-2006 | 航空航天.飛機電氣系統特性 | Aerospace - Characteristics of aircraft electrical systems |
| BS ISO 15859-1-2004 | 航空航天系列.航天系統.流體特性、抽樣和試驗方法.氧 | Aerospace series - Space systems - Fluid characteristics, sampling and test methods - Oxygen |
| BS ISO 15859-10-2004 | 航空航天系統.航天系統.流體特性、抽樣和試驗方法.水 | Aerospace series - Space systems - Fluid characteristics, sampling and test methods - Water |
| BS ISO 15859-11-2004 | 航空航天系統.航天系統.流體特性、抽樣和試驗方法.氨 | Aerospace series - Space systems - Fluid characteristics, sampling and test methods - Ammonia |
| BS ISO 15859-12-2004 | 航空航天系統.航天系統.流體特性、抽樣和試驗方法.二氧化碳 | Aerospace series - Space systems - Fluid characteristics, sampling and test methods - Carbon dioxide |
| BS ISO 15859-13-2004 | 航空航天系統.航天系統.流體性能、抽樣和試驗方法.呼吸氣體 | Aerospace series - Space systems - Fluid characteristics, sampling and test methods - Breathing air |
| BS ISO 15859-2-2004 | 航空航天系列.航天系統.流體特性、抽樣和試驗方法.氫 | Aerospace series - Space systems - Fluid characteristics, sampling and test methods - Hydrogen |
| BS ISO 15859-3-2004 | 航空航天系列.航天系統.流體特性、抽樣和試驗方法.氮 | Aerospace series - Space systems - Fluid characteristics, sampling and test methods - Nitrogen |
| BS ISO 15859-4-2004 | 航空航天系統.航天系統.流體特性、抽樣和試驗方法.氦 | Aerospace series - Space systems - Fluid characteristics, sampling and test methods - Helium |
| BS ISO 15859-5-2004 | 航空航天系統.航天系統.流體特性、抽樣和試驗方法.四氧化氮推進劑 | Aerospace series - Space systems - Fluid characteristics, sampling and test methods - Nitrogen tetroxide propellants |
| BS ISO 15859-6-2004 | 航空航天系統.航天系統.流體特性、抽樣和試驗方法.單甲基肼推進劑 | Aerospace series - Space systems - Fluid characteristics, sampling and test methods - Monomethylhydrazine propellant |
| BS ISO 15859-7-2004 | 航空航天系統.航天系統.流體特性、抽樣和試驗方法.肼推進劑 | Aerospace series - Space systems - Fluid characteristics, sampling and test methods - Hydrazine propellant |
| BS ISO 15859-8-2004 | 航空航天系統.航天系統.流體特性、抽樣和試驗方法.煤油推進劑 | Aerospace series - Space systems - Fluid characteristics, sampling and test methods - Kerosine propellant |
| BS ISO 15859-9-2004 | 航空航天系統.航天系統.流體特性、抽樣和試驗方法.氬 | Aerospace series - Space systems - Fluid characteristics, sampling and test methods - Argon |
| BS ISO 15860-2006 | 航天系統.氣體污染.現場試驗測量方法 | Space systems - Gas contamination - Measurement methods for field tests |
| BS ISO 15863-2006 | 航天系統.航天飛機與運載工具間接口的控制文獻 | Space systems - Spacecraft-to-launch-vehicle interface control document |
| BS ISO 15864-2004 | 航天系統.航空器、子系統和部件的一般試驗方法 | Space systems - General test methods for space craft, subsystems and units |
| BS ISO 15872-2002 | 航空航天.UNJ螺紋.測量 | Aerospace - UNJ threads - Gauging |
| BS ISO 15889-2003 | 航天數據和信息傳送系統.數據描述語言.EAST規范 | Space data and information transfer systems - Data description language - EAST specification |
| BS ISO 16458-2004 | 航天系統.不載人航天器運輸.一般要求 | Space systems - Unmanned spacecraft transportation - General requirements |
| BS ISO 17355-2004 | 航天數據和信息傳送系統.CCSDS文件送協議 | Space data and information transfer systems - CCSDS file delivery protocol |
| BS ISO 17399-2004 | 航天系統.人機集成 | Space systems - Man-systems integration |
| BS ISO 17433-2003 | 航天數據和信息傳送系統.數據包遙測業務 | Space data and information transfer systems - Packet telemetry services |
| BS ISO 2020-1-1997 | 航空航天.飛機控制裝置的預成形撓性鋼絲繩.第1部分:尺寸和負載 | Aerospace - Preformed flexible steel wire rope for aircraft controls - Dimensions and loads |
| BS ISO 2020-2-1997 | 航空航天.飛機控制裝置的預成形撓性鋼絲繩.第2部分:技術規范 | Aerospace - Preformed flexible steel wire rope for aircraft controls - Technical specification |
| BS ISO 21348-2007 | 航天環境(天然的和人造的).太陽輻照度的測定規程 | Space environment (natural and artificial) - Process for determining solar irradiances |
| BS ISO 21961-2003 | 航天數據和信息傳輸系統.數據實體字典規范語言(DEDSL).抽象語句 | Space data and information transfer systems - Data entity dictionary specification language (DEDSL) - Abstract syntax |
| BS ISO 21962-2003 | 航天數據和信息傳輸系統.數據實體字典規范語言(DEDSL).PVL語法 | Aerospace series - Space data and information transfer systems - Data entity dictionary specification language (DEDSL) - PVL syntax |
| BS ISO 22641-2005 | 航天數據和信息傳送系統.TM(遙測技術)同步和信道編碼 | Space data and information transfer systems - TM (telemetry) synchronization and channel coding |
| BS ISO 22642-2005 | 航天數據和信息傳送系統.TC(遙測指令)同步和信道編碼 | Space data and information systems - TC (telecommand) synchronisation and channel coding |
| BS ISO 22643-2003 | 航天數據和信息傳送系統.數據實體字典規范語言(DEDSL).XML/DTD語句 | Space data and information transfer systems - Data entity dictionary specification language (DEDSL) - XML/DTD Syntax |
| BS ISO 22644-2006 | 航天數據和信息傳送系統.軌道數據文電 | Space data and information transfer systems - Orbit data messages |
| BS ISO 22645-2005 | 航天數據和信息傳送系統.TM(遙測技術)航天數據鏈接協議 | Space data and information transfer systems - TM (telemetry) space data link protocol |
| BS ISO 22646-2005 | 航天數據和信息傳送系統.航天數據包協議 | Space data and information transfer systems - Space packet protocol |
| BS ISO 22647-2006 | 航天數據和信息傳輸系統.空間鏈路標識符 | Space data and information transfer systems - Space link identifiers |
| BS ISO 22666-2005 | 航天數據和信息傳送系統.AOS(高級軌道系統)航天數據鏈接協議 | Space data and information transfer systems - AOS (advanced orbiting systems) space data link protocol |
| BS ISO 22667-2005 | 航天數據和信息傳送系統.通信操作過程-1 | Space data and information transfer systems - Communications operations procedure-1 |
| BS ISO 22669-2007 | 航天數據和信息傳輸系統.空間鏈路擴展(SLE).全部回程幀業務 | Space data and information transfer systems - Space link extension (SLE) - Return-all-frames service |
| BS ISO 22671-2007 | 航天數據和信息傳輸系統.空間鏈路擴展(SLE).向前通信鏈路傳輸裝置(CLTU)業務 | Space data and information transfer systems - Space link extension (SLE) - Forward communications link transmission unit (CLTU) service |
| BS ISO 22672-2006 | 航天數據和信息傳輸系統.空間鏈路擴展(SLE).發送空間包服務 | Space data and information transfer systems - Space link extension (SLE) - Forward space packet service |
| BS ISO 23038-2006 | 航空航天系統.航空太陽能電池.電子和質子輻射試驗方法 | Space systems - Space solar cells - Electron and proton irradiation test methods |
| BS ISO 23933-2006 | 航空航天.等級為135 °C/20.684 kPa (275 °F/3 000 psi) 和135 °C/21 000 kPa (275 °F/3 046 psi)的芳族 | Aerospace series - Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135 °C/20 684 kPa (275 °F/3 000 psi) and 135 °C/21 000 kPa (275 °F/3 046 psi) - Procurement specification |
| BS ISO 26143-2007 | 航天數據和信息傳輸系統.空間鏈路擴展(SLE).回程操作控制場業務 | Space data and information transfer systems - Space link extension(SLE) - Return operational control fields service |
| BS ISO 6771-2007 | 航空航天.流體系統和部件.壓力和溫度分類 | Aerospace - Fluid systems and components - Pressure and temperature classifications |
| BS ISO 7169-2007 | 航空航天.液壓系統用24°錐形的、壓力范圍截至3000psi或21000kPa的可拆卸管接頭.采購規范(英制/米制) | Aerospace - Separable tube fittings for fluid systems, for 24 ° cones, for pressures up to 3000 psi or 21000 kPa - Procurement specification, inch/metric |
| BS ISO 7314-2003 | 航空航天.液壓系統.金屬軟管組件 | Aerospace - Fluid systems - Metal hose assemblies |
| BS ISO 8788-2000 | 航空航天.米制螺母.形位公差 | Aerospace - Nuts, metric - Tolerances of form and position |
| BS ISO 8913-2007 | 航空航天.輕型聚四氟乙烯(PTFE).分級:400 °F/3000 psi (204 ℃/20684 kPa)和204℃/21000 kPa (400 °F/304 | Aerospace - Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 °F/3000 psi (204 °C/20684 kPa) and 204 °C/21000 kPa (400 °F/3046 psi) - Procurement specification |
| BS ISO 9679-2006 | 航空航天.流體系統用夾具.試驗方法 | Aerospace - Clamps for fluid systems - Test methods |
| BS ISO 9760-2001 | 航空航天.航空器滾動軸承操縱鋼絲繩上的鍛制耐腐蝕鋼制叉形端.尺寸及載荷 | Aerospace - Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope, for rolling bearings - Dimensions and loads |
| BS M 38-1971 | 航空航天產品服役無損檢驗說明和報告匯編指南 | Guide to compilation of instructions and reports for the in-service non-destructive testing of aerospace products |
| BS M 39-1972 | 航空航天材料和部件穿透檢驗法 | Method for penetrant inspection of aerospace materials and components |
| BS M 55-1984 | 航空航天用液壓管連接件和配件的回轉彎曲試驗方法 | Method for rotary flexure testing of hydraulic tubing joints and fittings for aerospace use |
| BS M 56-1985 | 航空航天用聚四氟乙烯管密度和相對密度的測定方法 | Methods for determination of density and relative density of polytetrafluoroethylene (PTFE) tubing for aerospace applications |
| BS M 57-1985 | 航空航天用聚四氟乙烯高溫盤旋狀軟管組件規范 | Specification for high temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE) for aerospace applications |
| BS S 164-2002 | 航空航天系列.1%鉻-鉬鋼坯,棒材,鍛件和部件(1150對1300MPa:限制截面部分為16mm)(適用于焊接) | 1 % Chromium-molybdenum steel billets, bars, forgings and parts - (1150 to 1300 MPa: Limiting ruling section 16 mm) (Suitable for welding) |
| BS SP 166-1982 | 航空航天用彈簧限動環規范.碳素鋼開口簧環(米制系列) | Specification for spring retaining rings for aerospace application: carbon steel circlips (metric series) |
| BS X 36-1998 | 航空航天用空氣干燥選擇性可移動涂料圖形涂料脫除劑規范 | Specification for paint remover for air drying selectively removable paint scheme for aerospace purposes |
| BS X 37-2004 | 航空航天用熱脹漆.規范 | Intumescent paint for aerospace purposes - Specification |
| BS X 38-2005 | 航空航天用熱養護著色圖.規范 | Heat curing paint scheme for aerospace purposes - Specification |
| BS Z 1-1997 | 航天數據和信息傳輸系統.無線電測量和軌道數據 | Space data and information transfer systems - Radio metric and orbit data |
| BS Z 17-2000 | 航天數據和信息傳輸系統.數據系統.無損數據壓縮 | Space data and information transfer systems - Data systems - Lossless data compression |
| BS Z 18-2000 | 航天數據和信息傳輸系統.標準格式化數據單元.參照環境 | Space data and information transfer systems - Standard formatted data units - Referencing environment |
| BS Z 4-1997 | 航天數據和信息傳輸系統.標準格式數據單元.結構和構造規則 | Space data and information transfer systems - Standard formatted data units - Structure and construction rules |
| BS Z 5-1997 | 航天數據和信息發送系統.標準格式數據單元.控制授權程序 | Space data and information transfer systems - Standard formatted data units - Control authority procedures |
| 編號 | 中文名稱 | 英文名稱 |