| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF A00-500-5-1997 | 鑄造.交貨技術條件.第5部分:鎂合金鑄件的附加要求 | (FOUNDING. TECHNICAL CONDITIONS OF DELIVERY. PART 5 : ADDITIONAL REQUIREMENTS FOR MAGNESIUM ALLOY CASTINGS. (EUROPEAN STANDARD EN 1559-5).) |
| NF A00-500-6-1999 | 鑄造.交貨技術條件.第6部分:鋅合金鑄件的附加要求 | (FOUNDING. TECHNICAL CONDITIONS OF DELIVERY. PART 6 : ADDITIONAL REQUIREMENTS FOR ZINC ALLOY CASTINGS. (EUROPEAN STANDARD EN 1559-6).) |
| NF A00-501-3-1991 | 鑄件.訂貨和供應的一般技術條件.第3部分:通過重量壓力和負壓的鋁合金及鎂合金的鑄件 | (FOUNDRY PRODUCTS. GENERAL TECHNICAL CONDITIONS FOR ORDERING AND SUPPLYING. PART 3 : GRAVITY,LOW PRESSURE AND VACUUM CASTINGS OF ALUMINIUM ALLOYS AND MAGNESIUM ALLOYS.) |
| NF A01-009-1986 | 銅和銅合金.材料.詞匯和定義 | (Copper and copper alloys. Materials. Terms and definitions.) |
| NF A01-010-1971 | 鋁和鋁合金,銅和銅合金.取樣、樣品和試驗用的試件 | (ALUMINIUM AND ALUMINIUM ALLOYS. COPPER AND COPPER ALLOYS. SAMPLES, SPECIMENS AND TEST PIECES.) |
| NF A01-111-1986 | 銅和銅合金.半成品供應的一般技術要求 | (Copper and copper alloys. General technical requirements of supply of semi-finished products.) |
| NF A01-810-1975 | 鋅合金錠.發射光譜分析用樣品的制備和抽樣 | (Zinc alloy ingots. Selection and preparation of samples for spectrographic analysis.) |
| NF A01-820-1975 | 鋅合金錠.化學分析用樣品的制備和抽樣 | (Zinc alloy ingots. Selection and preparation of samples for chemical analysis.) |
| NF A02-002-1976 | 有色金屬和非鑄鐵合金制造方式和交貨條件常用名稱 | (CONVENTIONAL DESIGNATION OF THE METHODS OF MANUFACTURE AND DELIVERY STATES OF CAST NON FERROUS METALS AND ALLOYS.) |
| NF A02-006-1996 | 銅和銅合金.歐洲材料號碼系統 | (COPPER AND COPPER ALLOYS. EUROPEAN NUMBERING SYSTEM. (EUROPEAN STANDARD EN 1412).) |
| NF A02-007-1973 | 鎂和鎂合金制半成品.交貨條件的常用名稱 | (SEMI-FINISHED PRODUCTS MADE OF MAGNESIUM AND MAGNESIUM ALLOYS. TEMPER DESIGNATION.) |
| NF A02-008-1996 | 銅和銅合金.材料條件或回火硬度標識 | (Copper and copper alloys. Material condition or temper designation.) |
| NF A02-009-1986 | 銅和銅合金.材料.常用名稱與符號 | (Copper and copper alloys. Materials. Conventional designation.) |
| NF A02-011-1970 | 鋁及鋁合金.熱處理和機械處理的詞匯 | (ALUMINIUM AND ALUMINIUM ALLOYS. VOCABULARY OF HEAT TREATMENTS AND MECHANICAL TREATMENTS.) |
| NF A02-120-1994 | 鋁和鋁合金.鍛制產品的化學成分和產品形狀.第1部分:數字命名系統 | (Aluminium and aluminium alloys. Chemical composition and form of wrought products. Part 1 : numerical designation system.) |
| NF A02-120-3-2003 | 鋁和鋁合金.化學成分和鍛造產品的外形.第3部分:化學成分 | (Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3 : chemical composition.) |
| NF A02-121-1994 | 鋁和鋁合金.鍛制產品的化學成分和外形.第2部分:基于名稱與符號系統的化學符號 | (Aluminium and aluminium alloys. Chemical composition and form of wrought products. Part 2 : chemical symbol based designation system.) |
| NF A02-122-1994 | 鋁和鋁合金.鍛制產品的化學成分和產品形狀.第3部分:化學成分 | (ALUMINIUM AND ALUMINIUM ALLOYS. CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS. PART 3 : CHEMICAL COMPOSITION. (EUROPEAN STANDARD EN 573-3).) |
| NF A02-123-1994 | 鋁和鋁合金.鍛制產品的化學成分和產品形狀.第4部分:產品的形式 | (ALUMINIUM AND ALUMIMIUM ALLOYS. CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS. PART 4 : FORM OF PRODUCTS. (EUROPEAN STANDARD EN 573-4).) |
| NF A02-130-1-2003 | 鋁及鋁合金.再熔主合金和鑄件用合金鋁錠的名稱與符號.第1部分:數字命名系統 | (Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1 : numerical designation system.) |
| NF A02-130-2-2003 | 鋁及鋁合金.再熔主合金和鑄件用合金鋁錠的名稱與符號.第2部分:基于命名系統的化學符號 | (Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2 : chemical symbol based designation system.) |
| NF A02-130-3-2003 | 鋁及鋁合金.再熔主合金和鑄件用合金鋁錠的名稱與符號.第3部分:化合物的書寫規則 | (Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 3 : writing rules for chemical composition.) |
| NF A02-150-1993 | 鍛鋁和鋁合金鍛制產品名稱術語 | (Aluminium and aluminium alloys. Wrought products. Temper designations.) |
| NF A03-000-2000 | 銅和銅合金.螺旋延伸數的測定 | (Copper and copper alloys - Determination of spiral elongation number.) |
| NF A03-174-1999 | 鋼.伸長值的換算.第1部分:碳素鋼和低合金鋼 | (Steel. Conversion of elongation values. Part 1 : carbon and low alloy steels.) |
| NF A03-253-1972 | 鋁和鋁合金.銅和銅合金.維氏硬度試驗.0.2-120公斤力的試驗負荷 | (Aluminium and aluminium alloys. Copper and copper alloys. Vicker hardness. Test-loads ranging from 0,2 to 120 kgf.) |
| NF A03-260-1972 | 鋁和鋁合金.銅和銅合金.簡單彎曲折疊試驗 | (ALUMINIUM AND ALUMINIUM ALLOYS. COPPER AND COPPER ALLOYS. ORDINARY BENDING TEST.) |
| NF A03-268-1971 | 鋁和鋁合金.銅和銅合金.線材的簡單扭轉試驗 | (ALUMINIUM AND ALUMINIUM ALLOYS. COPPER AND COPPER ALLOYS. SIMPLE TORSION TEST FOR WIRE.) |
| NF A03-820-1981 | 鋅和鋅合金.鑄制品與軋制品的硬度試驗 | (ZINC AND ZINC ALLOYS. METHOD FOR THE VICKERS HARDNESS TESTING ON FOILS AND COILS.) |
| NF A03-830-1981 | 鋅和鋅合金.反復彎曲的疲勞試驗 | (ZINC AND ZINC ALLOYS. FATIGUE TEST (FLAT BENDING) OF SHEET,FOIL AND DIE CAST PIECES.) |
| NF A04-107-1980 | 鋼鐵產品.測定非合金鋼線材中非金屬雜質含量的顯微照相方法 | (IRON AND STEEL. MICROGRAPHIC METHOD OF DETERMINATION OF THE NON METALLIC INCLUSION CONTENT OF UNALLOYED WIRE ROD.) |
| NF A04-110-1984 | 鋼鐵產品.一般用于三次擠壓或拉伸的非合金鋼線材.表面檢查 | (Iron and steel. Wire rods of non-alloy general purpose steel for wire drawing. Surface examination.) |
| NF A04-150-1984 | 用射線照相術檢查鋁合金和鎂合金鑄件 | (Radiographic examination of aluminium and magnesium alloy castings.) |
| NF A04-201-1984 | 鋼鐵產品.用非合金結構鋼和特殊結構鋼熱處理.脫碳深度的測定 | (Steel products. Special purpose unalloy and alloy structural steels for heat traitement. Determination of depth of decarburization.) |
| NF A04-503-1988 | 鋁、銅、鎳及其合金制半成品.粒徑的測定.鋁和鋁合金 | (Semi-products made from aluminium, copper, nickel and their alloys. Determination of grain size. Aluminium and aluminium alloys.) |
| NF A04-504-1995 | 銅和銅合金.晶粒大小平均值的評定 | (Copper and copper alloys. Estimation of average grain size.) |
| NF A04-505-1988 | 鋁、銅、鎳及其合金制半成品.粒徑的測定.鎳和鎳合金 | (Semi-products made from aluminium, copper, nickel and their alloys. Determination of grain size. Nickel and nickel alloys.) |
| NF A05-001-1991 | 金屬和合金材料的腐蝕.詞匯 | (CORROSION OF METALS AND ALLOYS. VOCABULARY.) |
| NF A05-110-2001 | 銅和銅合金.經切分帶材的鏜孔區域殘留應力的測定 | (Copper and copper alloys - Determination of residual stresses in the border area of slit strip.) |
| NF A05-111-1995 | 鍛銅和銅合金.殘余應力的檢測.硝酸汞(1)試驗 | (Wrought copper and copper alloys. Detection of residual stress. Mercury(I) nitrate test.) |
| NF A05-113-1996 | 銅和銅合金.銅管或配件的內表面碳含量測定燃燒法 | (Copper and copper alloys. Combustion method for determination of carbon on the inner surface of copper tubes or fittings.) |
| NF A05-115-1999 | 銅及銅合金.管的渦流測試 | (Copper and copper alloys. Eddy current test for tubes.) |
| NF A05-270-1998 | 金屬和合金材料的腐蝕.表面海水中的金屬和合金的評估和闡述指南 | (CORROSION OF METALS AND ALLOYS. GUIDELINES FOR EXPOSING AND EVALUATING METALS AND ALLOYS IN SURFACE SEA WATER. (EUROPEAN STANDARD EN ISO 11306).) |
| NF A05-301-1981 | 鋁合金.厚鋁應力腐蝕試驗 | (Aluminium alloys. Stress corrosion cracking of thick products.) |
| NF A05-305-1981 | 奧氏體不銹鋼和鎳鉻鐵奧氏體合金.在四連多硫酸鈉中約束晶間腐蝕試驗 | (AUSTENITIC STAINLESS STEELS AND NI - CR - FE AUSTENITIC STAINLESS ALLOYS. INTERGRAIN CORROSION UNDER STRESS TEST IN SODIUM TETRATHIONATE.) |
| NF A05-306-1984 | 鋁合金.薄鋁制品腐蝕試驗 | (ALUMINIUM ALLOYS (SERIE 5XXX). EXFOLIATION CORROSION TESTING.) |
| NF A05-308-1995 | 金屬和合金的腐蝕.雙金屬在露天暴露腐蝕試驗中腐蝕的測定 | (Corrosion of metals and alloys. Determination of bimetallic corrosion in outdoor exposure corrosion tests.) |
| NF A05-311-1995 | 金屬和合金材料的腐蝕.黃銅阻抗的定義 | (CORROSION OF METALS AND ALLOYS. DETERMINATION OF DEZINFICATION RESISTANCE OF BRASS. (EUROPEAN STANDARD EN ISO 6509).) |
| NF A05-315-1996 | 鎳基合金.耐晶間腐蝕性的測定 | (Nickel-based alloys. Determination of resistance to intergranular corrosion.) |
| NF A05-401-2002 | 金屬和合金的腐蝕.核動力反應堆用的鋯合金的水腐蝕試驗 | (Corrosion of metals and alloys - Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors.) |
| NF A05-402-1995 | 金屬和合金.大氣腐蝕試驗.現場測試的一般要求(歐洲標準EN ISO 8565) | (METALS AND ALLOYS. ATMOSPHERIC CORROSION TESTING. GENERAL REQUIREMENTS FOR FIELD TESTS. (EUROPEAN STANDARD EN ISO 8565).) |
| NF A05-412-2-2003 | 金屬材料的防腐.土壤腐蝕的可能性.第2部分:低合金和非合金黑色金屬材料 | (Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2 : low alloyed and non alloyed ferrous materials.) |
| NF A05-501-6-2003 | 金屬和合金的腐蝕.應力腐蝕試驗.第6部分:恒定負荷或恒定位移條件下試驗用預裂試樣的制備 | (Corrosion of metals and alloys - Stress corrosion testing - Part 6 : preparation and use of pre-cracked specimens for tests under constant load or constant displacement.) |
| NF A06-202-1995 | 銀和銀珠寶合金的測定.溴化鉀容量法 | (DETERMINATION OF SILVER IN SILVER JEWELLERY ALLOYS. VOLUMETRIC (POTENTIOMETRIC) METHOD USING POTASSIUM BROMIDE. (EUROPEAN STANDARD EN 31427).) |
| NF A06-203-1995 | 在鉑飾用合金中鉑含量測定.用氯化汞還原法測定重量 | (DETERMINATION OF PLATINUM IN PLATINUM JEWELLERY ALLOYS. GRAVIMETRIC METHOD AFTER REDUCTION WITH MERCURY(I) CHLORIDE. (EUROPEAN STANDARD EN ISO 11489).) |
| NF A06-204-1995 | 鈀珠寶合金中鈀的測定.丁二酮肟重量的測定 | (DETERMINATION OF PALLADIUM IN PALLADIUM JEWELLERY ALLOYS. GRAVIMETRIC METHOD WITH DIMETHYL GLYOXIME. (EUROPEAN STANDARD EN ISO 11490).) |
| NF A06-205-1995 | 在鉑飾用合金中鉑含量測定.六氯鉑酸二銨沉淀后測定重量 | (DETERMINATION OF PLATINUM IN PLATINUM JEWELLERY ALLOYS. GRAVIMETRIC METHOD AFTER PRECIPITATION OF DIAMMONIUM HEXACHLOROPLATINATE. (EUROPEAN STANDARD EN ISO 11210).) |
| NF A06-386-2-2003 | 非合金鋼.低碳含量測定.第2部分:在感應爐中燃燒(預熱)后的紅外吸收法 | (Unalloyed steel - Determination of low carbon content - Part 2 : infrared absorption method after combustion in an induction furnace (with preheating).) |
| NF A06-400-1999 | 鉛和鉛合金.分析取樣方法 | (Lead and lead alloys. Methods of sampling for analysis.) |
| NF A06-551-1976 | 鋁和鋁合金的化學分析.銅的分光光度測定 | (Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of copper.) |
| NF A06-552-1964 | 鋁和鋁合金的化學分析.銅的測定 | (Chemical analysis of aluminium and aluminium alloys. Determination of copper.) |
| NF A06-553-1966 | 鋁和鋁合金的化學分析.鋅的測定 | (CHEMICAL ANALYSIS OF ALUMINIUM AND ALUMINIUM ALLOYS. DETERMINATION OF ZINC.) |
| NF A06-564-1969 | 抗摩擦鋁合金的化學分析.錫的容量法測定 | (CHEMICAL ANALYSIS OF ALUMINIUM ANTIFRICTION ALLOYS. VOLUMETRIC DETERMINATION OF TIN.) |
| NF A06-568-1971 | 鋁和鋁合金的化學分析.錫的分光光度測定 | (CHEMICAL ANALYSIS OF ALUMINIUM AND ALUMINIUM ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF TIN.) |
| NF A06-570-1964 | 鋁和鋁合金的化學分析.硅總含量的測定 | (Chemical analysis of aluminium and aluminium alloys. Determination of total silicon.) |
| NF A06-571-1964 | 鋁和鋁合金的化學分析.鐵的分光光度測定 | (CHEMICAL ANALYSIS OF ALUMINIUM AND ALUMINIUM ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF IRON.) |
| NF A06-574-1966 | 鋁和鋁合金的化學分析.鈦的分光光度測定 | (CHEMICAL ANALYSIS OF ALUMINIUM AND ALUMINIUM ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF TITANIUM.) |
| NF A06-575-1971 | 鋁合金的化學分析.鎳的重量法測定 | (CHEMICAL ANALYSIS OF ALUMINIUM ALLOYS. GRAVIMETRIC DETERMINATION OF NICKEL.) |
| NF A06-576-1966 | 鋁和鋁合金的化學分析.錳的分光光度測定 | (CHEMICAL ANALYSIS OF ALUMINIUM AND ALUMINIUM ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF MANGANESE.) |
| NF A06-577-1984 | 鋁和鋁合金的化學分析.鈷的比色法測定 | (Chemical analysis of aluminium and aluminium alloys. Colorimetric determination of cobalt.) |
| NF A06-579-1966 | 鋁和鋁合金的化學分析.鎂的測定 | (CHEMICAL ANALYSIS OF ALUMINIUM AND ALUMINIUM ALLOYS. DETERMINATION OF MAGNESIUM.) |
| NF A06-581-1984 | 鋁和鋁合金的化學分析.鉻的比色法測定 | (Chemical analysis of aluminium and aluminium alloys. Colorimetric determination of chromium.) |
| NF A06-582-1959 | 鋁和鋁合金的化學分析.鋯的分光光度測定 | (CHEMICAL ANALYSIS OF ALUMINIUM AND ALUMINIUM ALLOYS. COLORIMETRIC DETERMINATION OF ZIRCONIUM.) |
| NF A06-583-1984 | 鋁和鋁合金的化學分析.鉍的分光光度測定 | (Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of bismuth.) |
| NF A06-584-1984 | 鋁和鋁合金的化學分析.鈹?shù)姆止夤舛葴y定 | (Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of berrylium.) |
| NF A06-585-1965 | 鋁和鋁合金的化學分析.鉛的測定 | (CHEMICAL ANALYSIS OF ALUMINIUM AND ALUMINIUM ALLOYS. DETERMINATION OF LEAD.) |
| NF A06-586-1965 | 鋁和鋁合金的化學分析.硼的分光光度測定 | (CHEMICAL ANALYSIS OF ALUMINIUM AND ALUMINIUM ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF BORON.) |
| NF A06-587-1965 | 鋁和鋁合金的化學分析.汞的測定 | (CHEMICAL ANALYSIS OF ALUMINIUM AND ALUMINIUM ALLOYS. DETERMINATION OF MERCURY.) |
| NF A06-602-1984 | 鎂和鎂合金的化學分析.鋁的測定 | (Chemical analysis of magnesium and magnesium alloys. Determination of aluminium.) |
| NF A06-606-1984 | 鎂和鎂合金的化學分析.鐵的分光光度測定 | (Chemical analysis of magnesium and magnesium alloys. Spectrophotometric determination of iron.) |
| NF A06-609-1966 | 鎂和鎂合金的化學分析.鋅的測定 | (CHEMICAL ANALYSIS OF MAGNESIUM AND MAGNESIUM ALLOYS. DETERMINATION OF ZINC.) |
| NF A06-613-1976 | 鎂和鎂合金的化學分析.銅的分光光度測定 | (CHEMICAL ANALYSIS OF MAGNESIUM AND MAGNESIUM ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF COPPER.) |
| NF A06-616-1981 | 鎂和鎂合金的化學分析.鎳的分光光度測定 | (Chemical analysis of magnesium and magnesium alloys. Spectrophotometric determination of nickel.) |
| NF A06-619-1984 | 鎂和鎂合金的化學分析.硅的比色法測定 | (Chemical analysis of magnesium and magnesium alloys. Colorimetric determination of silicon.) |
| NF A06-622-1984 | 鎂和鎂合金的化學分析.錳的分光光度測定 | (Chemical analysis of magnesium and magnesium alloys. Spectrophotometric determination of manganese.) |
| NF A06-624-1984 | 鎂和鎂合金的化學分析.鋯的分光光度測定 | (Chemical analysis of magnesium and magnesium alloys. Spectrophotometric determination of zirconium.) |
| NF A06-650-1992 | 鈦及鈦合金的化學分析.氫含量的測定 | (CHEMICAL ANALYSIS OF TITANIUM AND TITATIUM ALLOYS. DETERMINATION OF HYDROGEN CONTENT.) |
| NF A06-651-1992 | 鈦及鈦合金的化學分析.氧含量的測定 | (CHEMICAL ANALYSIS OF TITANIUM AND TITANIUM ALLOYS. DETERMINATION OF OXYGEN CONTENT.) |
| NF A06-653-1993 | 鈦及鈦合金的化學分析.鐵含量測定.分子汲收光譜測定法 | (CHEMICAL ANALYSIS OF TITANIUM AND TITANIUM ALLOYS. DETERMINATION OF IRON CONTENT. MOLECULAR ABSORPTION SPECTROMETRY METHOD.) |
| NF A06-654-1993 | 鈦合金的化學分析.氮含量測定.滴定法 | (CHEMICAL ANA LYSIS OF TITANIUM ALLOYS. DETERMINATION OF NITROGEN CONTENT. TITRIMETRIC METHOD.) |
| NF A06-655-1993 | 鈦及鈦合金的化學分析.硅含量測定.重力測量法 | (CHEMICAL ANALYSIS OF TITANIUM AND TITANIUM ALLOYS. DETERMINATION OF SILICON CONTENT. GRAVIMETRIC METHOD.) |
| NF A06-656-1993 | 鈦合金的化學分析.TI-AI-V中釩含量的測定.滴定法 | (CHEMICAL ANALYSIS OF TITANIUM ALLOYS. DETERMINATION OF VANADIUM CONTENT IN TI-AI-V ALLOY. TITRIMETRIC METHOD.) |
| NF A06-657-1993 | 鈦及鈦合金的化學分析.在TI-AI-ZR合金中的鋯含量的測定.帶有溴扁桃酸重力測量法 | (CHEMICAL ANALYSIS OF TITANIUM AND TITANIUM ALLOYS. DETERMINATION OF ZIRCONIUM CONTENT IN TI-AI-ZR ALLOY. GRAVIMETRIC METHOD WITH BROMOMANDELIC ACID.) |
| NF A06-701-1967 | 銅和銅合金的化學分析.溶解.銅的電解測定.鉛的分離 | (CHEMICAL ANALYSIS OF COPPER AND COPPER ALLOYS. DISSOLVING ELECTROLYTIC DETERMINATION OF COPPER LEAD SEPARATION.) |
| NF A06-707-1967 | 銅和銅合金的化學分析.鉛的電解測定 | (CHEMICAL ANALYQIS OF COPPER AND ITS ALLOYS. ELECTROLYTIC DETERMINATION OF LEAD.) |
| NF A06-709-1986 | 銅和銅合金.銻含量的測定.若丹明B(Rhondamine B)光譜測定法 | (Copper and copper alloys. Determination of antimony content. Rhodamine B spectrometric method.) |
| NF A06-710-1987 | 銅和銅合金的化學分析.鎳的測定.分子吸收分光光度法 | (Chemical analysis of copper and copper alloys. Determination of nickel content. Molecular absorption spectrophotometric method.) |
| NF A06-711-1987 | 銅和銅合金的化學分析.鐵含量的測定.分子吸收分光光度法 | (Chemical analysis of copper and copper alloys. Determination of iron content. Molecular absorption spectrophotometric method.) |
| NF A06-712-1986 | 銅和銅合金.鉍含量的測定.二乙基二硫代氨基甲酸鹽光譜測定法 | (Copper and copper alloys. Determination of bismuth content. Diethyldithiocarbamate spectrometric method.) |
| NF A06-713-1970 | 銅和銅合金的化學分析.硅的分光光度測定 | (CHEMICAL ANALYSIS OF COPPER AND ITS ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF SILICON.) |
| NF A06-714-1968 | 銅和銅合金的化學分析.鋁的分光光度測定 | (CHEMICAL ANALYSIS OF COPPER AND ITS ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF ALUMINIUM.) |
| NF A06-715-1968 | 銅和銅合金的化學分析.錫的分光光度測定 | (CHEMICAL ANALYSIS OF COPPER AND ITS ALLOYS. SPECTROPHOTOMETRIC DETERMINATIONOF TIN.) |
| NF A06-716-1970 | 銅和銅合金的化學分析.錳的分光光度測定 | (CHEMICAL ANALYSIS OF COPPER AND COPPER ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF MANGANESE.) |
| NF A06-717-1983 | 銅和銅合金的化學分析.砷的分光光度測定 | (Chemical analysis of copper and copper alloys. Spectrophotometric determination of arsenic.) |
| NF A06-718-1986 | 銅和銅合金.磷含量的測定.分子吸收分光光度法 | (Copper and copper alloys. Determination of phosphorus content. Molecular absorption spectrophotometric method.) |
| NF A06-719-1986 | 銅和銅合金.硫含量的測定.燃燒后的滴定法 | (Copper and copper alloys. Determination of sulfur content. Combustion titrimetric method.) |
| NF A06-731-1986 | 銅合金.鐵含量的測定.二乙二胺四乙酸鈉滴定法 | (Copper alloys. Determination of iron content. Na2EDTA titrimetric method.) |
| NF A06-750-1983 | 銅合金的化學分析.鎳的測定.重量分析法 | (Chemical analysis of copper alloys. Determination of nickel content. Gravimetric method.) |
| NF A06-751-1975 | 銅合金的化學分析.鉻總含量的容量測定 | (CHEMICAL ANALYSIS OF COPPER ALLOYS. VOLUMETRIC DETERMINATION OF TOTAL CHROMIUM) |
| NF A06-752-1967 | 銅合金的化學分析.鋅的容量測定 | (CHEMICAL ANALYSIS OF COPPER ALLOYS. VOLUMETRIC DETERMINATION OF ZINC.) |
| NF A06-754-1968 | 銅合金的化學分析.鋁的重量分析法測定 | (CHEMICAL ANALYSIS OF COPPER ALLOYS. GRAVIMETRIC DETERMINATION OF ALUMINIUM.) |
| NF A06-755-1974 | 銅合金的化學分析.錫的容量測定 | (Chemical analysis of copper alloys. Volumetric determination of tin.) |
| NF A06-759-1975 | 銅合金的化學分析.鈹?shù)闹亓糠治龇y定 | (CHEMICAL ANALYSIS OF COPPER ALLOYS. GRAVIMETRIC DETERMINATION OF BERYLLIUM) |
| NF A06-800-1968 | 鋅和鋅合金的化學分析.銅的分光光度測定.(Cuprazon法) | (Chemical analysis of zinc and its alloys. Spectrophotometric determination of copper (cuprazon method).) |
| NF A06-801-1966 | 鋅和鋅合金的化學分析.銅的分光光度測定 | (CHEMICAL ANALYSIS OF ZINC AND ITS ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF COPPER.) |
| NF A06-821-1967 | 鋅合金的化學分析.銅的電解測定 | (CHEMICAL ANALYSIS OF ZINC ALLOYS. ELECTROLYTIC DETERMINATION OF COPPER.) |
| NF A06-823-1967 | 鋅合金的化學分析.鐵的分光光度測定 | (CHEMICAL ANALYSIS OF ZINC ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF IRON.) |
| NF A06-826-1968 | 鋅合金的化學分析.鎂的滴定分析的測定 | (CHEMICAL ANALYSIS OF ZINC ALLOYS. TITRIMETRIC DETERMINATION OF MAGNESIUM.) |
| NF A06-827-1968 | 鋅合金的化學分析.鈦的分光光度測定 | (CHEMICAL ANALYSIS OF ZINC ALLOYS. SPECTROPHOTOMETRIC DETERMINATION OF TITANIUM.) |
| NF A06-840-1998 | 鋅和鋅合金.光學發射光譜分析 | (ZINC AND ZINC ALLOYS. OPTICAL EMISSION SPECTROMETRIC ANALYSIS. (EUROPEAN STANDARD EN 12019).) |
| NF A06-841-1-2002 | 鋅及鋅合金.化學分析.第1部分:鋅合金中鋁的測定.滴定法 | (Zinc and zinc alloys - Chemical analysis - Part 1: determination of aluminium in zinc alloys - Titrimetric method.) |
| NF A06-841-2-2002 | 鋅及鋅合金.化學分析.第2部分:鋅合金中鎂的測定.火焰原子吸收光譜法 | (Zinc and zinc alloys - Chemical analysis - Part 2 : determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method.) |
| NF A06-841-2/A1-2003 | 鋅及鋅合金.化學分析.第2部分:鋅合金中鎂的測定.火焰原子吸收光譜測定法 | (Zinc and zinc alloys - Chemical analysis - Part 2 : determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method.) |
| NF A06-841-3-2002 | 鋅及鋅合金.化學分析.第3部分:鉛、鎘、銅的測定.火焰原子吸收光譜法 | (Zinc and zinc alloys - Chemical analysis - Part 3 : determination of lead, cadmium and copper - Flame atomic absorption spectrometric method.) |
| NF A06-841-4-2003 | 鋅及鋅合金.化學分析.第4部分:鋅合金中鐵的測定.分光光度法 | (Zinc and zinc alloys - Chemical analysis - Part 4 : determination of iron in zinc alloys - Spectrophotometric method.) |
| NF A06-841-5-2003 | 鋅及鋅合金.化學分析.第5部分:用分光光度法測定原生鋅中鐵的含量 | (Zinc and zinc alloys - Chemical analysis - Part 5 : determination of iron by spectrophotometry in primary zinc.) |
| NF A06-841-6-2003 | 鋅及鋅合金.化學分析.第6部分:用火焰原子吸收光譜法測定鋁和鐵的含量 | (Zinc and zinc alloys - Chemical analysis - Part 6 : determination of aluminium and iron by atomic absorption spectrometry.) |
| NF A06-901-1966 | 錫和錫合金的化學分析.銅的分光光度測定 | (CHEMICAL ANALYSIS OF TIN AND ITS ALLOYS. SPECTROPHOTOMETRICDETERMINATION OF COPPER.) |
| NF A06-998-1960 | 印刷用合金的化學分析 | (CHEMICAL ANALYSIS OF PRINTING ALLOYS.) |
| NF A06-999-1950 | 錫基和鉛基的抗摩擦合金的化學分析 | (METALLURGY. CHEMICAL ANALYSIS. TIN AND LEAD ANTIFRICTION ALLOYS.) |
| NF A07-500-1979 | 鋁及其合金的發射光譜分析 | (ANALYSIS OF ALUMINIUM AND ITS ALLOYS BY EMISSION SPECTROMETRY.) |
| NF A07-510-1971 | 非合金鋁的發射光譜分析 | (Analysis of non-alloyed aluminium by emission spectrography.) |
| NF A07-510X2-1975 | 非合金鋁的發射光譜分析 | (ANALYSIS OF NON-ALLOYED ALUMINIUM BY EMISSION SPECTROGRAPHY.) |
| NF A07-515-1971 | 鋁銅合金的發射光譜分析 | (ANALYSIS OF ALUMINIUM COPPER ALLOYS BY EMISSION SPECTROGRAPHY.) |
| NF A07-520-1971 | 鋁硅及鋁硅銅合金的發射光譜分析 | (ANALYSIS OF ALUMINIUM SILICON AND ALUMINIUM-SILICON-COPPER ALLOYS BY EMISSION SPECTROGRAPHY.) |
| NF A07-822-1954 | 鑄壓用鋅合金的化學分析.錫的分光光度測定 | (CHEMICAL ANALYSIS OF ZINC ALLOYS FOR DIE-CASTING. SPECTROGRAPHIC DETERMINATION OF TIN.) |
| NF A08-001-1979 | 輕金屬及合金的化學分析.原子吸收光譜法在鋁、鎂及其合金分析中的應用 | (CHEMICAL ANALYSIS OF LIGHT METALS AND ALLOYS. APPLICATION OF ATOMIC ABSORPTION SPECTROMETRY TO THE ANALYSIS OF ALUMINIUM,MAGNESIUM AND THEIR ALLOYS.) |
| NF A08-450-1979 | 鉛合金的化學分析.銻的測定(原子吸收法) | (CHEMICAL ANALYSIS OF LEAD ALLOYS. DETERMINATION OF ANTIMONY (ATOMIC ABSORPTION METHOD).) |
| NF A08-547-1979 | 鋁及其合金的化學分析.鉛的測定.原子吸收法 | (CHEMICAL ANALYSIS OF ALUMINIUM AND ITS ALLOYS. DETERMINATION OF LEAD. ATOMIC ABSORPTION METHOD.) |
| NF A08-553-1979 | 鋁及其合金的化學分析.鋅的測定.原子吸收法 | (CHEMICAL ANALYSIS OF ALUMINIUM AND ITS ALLOYS. DETERMINATION OF ZINC. ATOMIC ABSORPTION METHOD.) |
| NF A08-556-1979 | 鋁及其合金的化學分析.鉻的測定.原子吸收法 | (CHEMICAL ANALYSIS OF ALUMINIUM AND ITS ALLOYS. DETERMINATION OF CHROMIUM. ATOMIC ABSORPTION METHOD.) |
| NF A08-563-1974 | 鋁合金的化學分析.銻的測定(原子吸收法) | (CHEMICAL ANALYSIS OF ALUMINIUM ALLOYS. DETERMINATION OF ANTIMONY. (ATOMIC ABSORPTION METHOD).) |
| NF A08-568-1974 | 鋁合金的化學分析.錫的測定(原子吸收法) | (CHEMICAL ANALYSIS OF ALUMINIUM ALLOYS. DETERMINATION OF TIN. (ATOMIC ABSORPTION METHOD).) |
| NF A08-650-1992 | 鈦及鈦合金的化學分析.用火焰原子吸收光譜法測定TA6V合金內鋁、釩和鐵的含量 | (CHEMICAL ANALYSIS OF TITANIUM AND TITANIUM ALLOYS. DETEMINATION OF ALUMINIUM, VANADIUM AND IRON CONTENTS IN THE TA6V ALLOY BY FLAME ATOMIC ABSORPTION SPECTROPHOTOMETRY.) |
| NF A08-651-1993 | 鈦及鋁合金的化學分析.用火焰原子吸收光譜及等離子排放光譜法測定TA6V合金內低合金的元素含量的測定 | (CHEMICAL ANALYSIS OF TITANIUM AND ALUMINIUM ALLOYS. DETERMINATION OF ELEMENTS CONTENTS IN LOW CONTENT IN THE TA6V ALLOY. METHOD BY FLAME ATOMATIC ABSORPTION SPECTROMETRY OR BY PLASMA EMISSION SPECTROMETRY.) |
| NF A08-707-1983 | 銅合金.鉛的測定.火焰原子吸收光譜測定法 | (COPPER ALLOYS. DETERMINATION OF LEAD CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.) |
| NF A08-709-1983 | 銅合金的化學分析.銻的測定.原子吸收光譜測定法 | (CHEMICAL ANALYSIS OF COPPER ALLOYS. DETERMINATION OF ANTIMONY CONTENT. ATOMIC ABSORPTION SPECTROMETRY METHOD.) |
| NF A08-710-1986 | 銅和銅合金.鎳的測定.火焰原子吸收光譜測定法 | (Copper and copper alloys. Determination of nickel content. Flame atomic absorption spectrometric method.) |
| NF A08-711-1986 | 銅和銅合金.鐵的測定.火焰原子吸收光譜測定法 | (Copper and copper alloys. Determination of iron content. Flame atomic absorption spectrometric method.) |
| NF A08-714-1983 | 銅和銅合金.鋁的測定.火焰原子吸收光譜測定法 | (Copper and copper alloys. Determination of aluminium content. Flame atomic absorption spectrometric method.) |
| NF A08-715-1985 | 銅和銅合金的化學分析.錫的測定.火焰原子吸收光譜測定法 | (CHEMICAL ANALYSIS OF COPPER AND COPPER ALLOYS. DETERMINATION OF TIN CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.) |
| NF A08-716-1985 | 銅和銅合金的化學分析.錳的測定.火焰原子吸收光譜測定法 | (CHEMICAL ANALYSIS OF COPPER AND COPPER ALLOYS. DETERMINATION OF MANGANESE CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.) |
| NF A08-720-1985 | 銅和銅合金的化學分析.鈷的測定.火焰原子吸收光譜測定法 | (CHEMICAL ANALYSIS OF COPPER AND COPPER ALLOYS. DETERMINATION OF COBALT CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.) |
| NF A08-724-1983 | 銅合金.鎘的測定.火焰原子吸收光譜測定法 | (COPPER ALLOYS. DETERMINATION OF CADMIUM CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.) |
| NF A08-751-1983 | 銅和銅合金.鉻的測定.火焰原子吸收光譜測定法 | (COPPER AND COPPER ALLOYS. DETERMINATION OF CHROMIUM CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.) |
| NF A08-759-1974 | 銅合金的化學分析.鈹?shù)臏y定(原子吸收法) | (CHEMICAL ANALYSIS OF COPPER ALLOYS. DETERMINATION OF BERYLLIUM. (ATOMIC ABSORPTION METHOD).) |
| NF A08-825-1973 | 鋅合金的化學分析.鋁的測定(原子吸收法) | (CHEMICAL ANALYSIS OF ZINC ALLOYS. DETERMINATION OF ALUMINIUM. (ATOMIC ABSOPTION METHOD).) |
| NF A08-901-1991 | 鎳合金.火焰原子吸收光譜測定分析法.第1部分:一般要求和樣品溶解 | (NICKEL ALLOYS. FLAME ATOMIC ABSORPTION SPECTROMETRIC ANALYSIS. PART 1 : GENERAL REQUIREMENTS AND SAMPLE DISSOLUTION.) |
| NF A08-902-1991 | 鎳合金.火焰原子吸收光譜測定分析法.第2部分:鈷含量測定 | (NICKEL ALLOYS. FLAME ATOMIC ABSORPTION SPECTROMETRIC ANALYSIS. PART 2 : DETERMINATION OF COBALT CONTENT.) |
| NF A08-903-1991 | 鎳合金.火焰原子吸收光譜測定分析法.第3部分:鉻含量測定 | (NICKEL ALLOYS. FLAME ATOMIC ABSORPTION SPECTROMETRIC ANALYSIS. PART 3 : DETERMINATION OF CHROMIUM CONTENT.) |
| NF A08-904-1991 | 鎳合金.火焰原子吸收光譜測定分析法.第4部分:銅含量測定 | (NICKEL ALLOYS. FLAME ATOMIC ABSORPTION SPECTROMETRIC ANALYSIS. PART 4 : DETERMINATION OF COPPER CONTENT.) |
| NF A08-905-1991 | 鎳合金.火焰原子吸收光譜測定分析法.第5部分:鐵含量測定 | (NICKEL ALLOYS. FLAME ATOMIC ABSORPTION SPECTROMETRIC ANALYSIS. PART 5 : DETERMINATION OF IRON CONTENT.) |
| NF A08-906-1991 | 鎳合金.火焰原子吸收光譜測定分析法.第6部分:錳含量測定 | (NICKEL ALLOYS. FLAME ATOMIC ABSORPTION SPECTROMETRIC ANALYSIS. PART 6 : DETERMINATION OF MANGANESE CONTENT.) |
| NF A10-003-1967 | 鐵合金和硅合金的化學分析.碳的重量法測定 | (CHEMICAL ANALYSIS OF FERRO-ALLOYS AND SILICO-ALLOYS. GRAVIMETRIC DETERMINATION OF CARBON.) |
| NF A10-0031-1968 | 鐵合金和硅合金的化學分析.碳的重量法測定.第1次修改 | (CHEMICAL ANALYSIS OF FERRO-ALLOYS AND SILICO-ALLOYS. GRAVIMETRIC DETERMINATION OF CARBON.) |
| NF A10-0032-1969 | 鐵合金和硅合金的化學分析.碳的重量法測定.第2次修改 | (CHEMICAL ANALYSIS OF FERROUS ALLOYS AND SILICON ALLOYS. GRAVIMETRIC DETERMINATION OF CARBON.) |
| NF A10-0033-1970 | 鐵合金和硅合金的化學分析.碳的重量法測定.第3次修改 | (CHEMICAL ANALYSIS OF FERROUS ALLOYS AND SILICON ALLOYS. GRAVIMETRIC DETERMINATION OF CARBON.) |
| NF A10-0034-1971 | 鐵合金和硅合金的化學分析.碳的重量法測定.第4次修改 | (CHEMICAL ANALYSIS OF FERROUS ALLOYS AND SILICON ALLOYS. GRAVIMETRIC DETERMINATION OF CARBON.) |
| NF A10-101-1976 | 硅鐵合金.硅錳鐵合金及硅鉻鐵合金的化學分析.硅的重量法測定 | (CHEMICAL ANALYSIS OF FERROSILICON,FERROSILICOMANGANESE AND FERROSILICOCHROMIUM. DETERMINATION OF SILICON. GRAVIMETRIC METHOD.) |
| NF A10-186-1977 | 鐵合金的化學分析.硅鐵合金中鋁含量的測定.原子吸收光譜法 | (CHEMICAL ANALYSIS OF FERROALLOYS. DETERMINATION OF ALUMINIUM IN FERROSILICON. ATOMIC ABSORPTION SPECTROMETRIC METHOD.) |
| NF A10-621-1992 | 鎳、鎳鐵和鎳合金.硫的測定.通過在感應爐內燃燒后的紅外線吸收法 | (Nickel, ferronickel and nickel alloys. Determination of sulfur content. Infra-red absorption method after induction furnace combustion.) |
| NF A10-622-1992 | 鎳、鎳鐵和鎳合金.硫的測定.感應爐內燃燒后碘量滴定法 | (Nickel, ferronickel and nickel alloys. Determination of sulfur content. Iodimetric titration method after induction furnace combustion.) |
| NF A10-656-1968 | 鎳鐵合金的化學分析.鎳鈷總含量的電解法測定 | (CHEMICAL ANALYSIS OF FERRO-NICKEL. ELECTROLYTIC DETERMINATION OF TOTAL NICKEL + COBALT.) |
| NF A10-954-1972 | 釩鐵合金的化學分析.分光光度法測定磷含量 | (CHEMICAL ANALYSIS OF FERRO-VANADIUM. SPECTROPHOTOMETRIC DETERMINATION OF PHOSPHORUS.) |
| NF A11-103-1977 | 鈮鐵合金的化學分析.X射線熒光光譜法測定鈮含量 | (CHEMICAL ANALYSIS OF FERRONIOBIUM. DETERMINATION OF NIOBIUM BY X RAY FLUORESCENCE SPECTROMETRY.) |
| NF A13-010-1974 | 鐵合金.硅鐵.規范 | (FERRO-ALLOYS. FERROSILICON. REQUIREMENTS.) |
| NF A13-020-1975 | 鐵合金.錳鐵.規范 | (FERRO-ALLOYS. FERRO-MANGANESE. SPECIFICATIONS) |
| NF A13-030-1976 | 鐵合金.硅錳鐵.規范 | (FERRO-ALLOYS. FERROSILICOMANGANESE. SPECIFICATIONS.) |
| NF A13-040-1976 | 鐵合金.鉻鐵.規范 | (FERRO-ALLOYS. FERROCHROMIUM. SPECIFICATIONS.) |
| NF A13-050-1976 | 鐵合金.硅鉻鐵.規范 | (FERRO-ALLOYS. FERROSILICOCHROMIUM. SPECIFICATIONS.) |
| NF A13-602-1992 | 鐵鎳合金球.分析取樣 | (FERRONICKEL SHOT. SAMPLING FOR ANALYSIS. (EUROPEAN STANDARD EN 28409).) |
| NF A32-060-2001 | 鑄造產品.泵、閥門和配件用鑄鋼件和鎳合金鑄件(內部部件和防護殼體) | (Foundry products - Cast steel and nickel alloy castings for pumps, valves and fittings (enclosures and internal components).) |
| NF A35-051-1-1995 | 拉拔和/或冷軋用非合金鋼棒.第1部分:一般要求 | (Non-alloy steel rod for drawing and/or cold rolling. Part 1 : general requirements.) |
| NF A35-051-2-1995 | 拉拔和/或冷軋用非合金鋼棒.第2部分:一般用途鋼棒的專門要求 | (Non-alloy steel rod for drawing and/or cold rolling. Part 2 : specific requirements for general purposes rod.) |
| NF A35-051-3-1995 | 拉拔和/或冷軋用非合金鋼棒.第3部分:沸騰和沸騰代用低碳鋼棒 | (NON-ALLOY STEEL ROD FOR DRAWING AND/OR COLD ROLLING. PART 3 : SPECIFIC REQUIREMENTS FOR RIMMED AND RIMMED SUBSTITUTE LOW CARBON STEEL ROD. (EUROPEAN STANDARD EN 10016-3).) |
| NF A35-051-4-1995 | 拉拔和/或冷軋用非合金鋼棒.第4部分:特殊用途鋼棒的專門要求 | (NON-ALLOY STEEL ROD FOR DRAWING AND/OR COLD ROLLING. PART 4 : SPECIFIC REQUIREMENTS FOR ROD FOR SPECIAL APPLICATIONS. (EUROPEAN STANDARD EN 10016-4).) |
| NF A35-052-1987 | 鋼鐵產品.帶改進粘附性的焊接鋼絲網和鋼絲用非合金鋼線材 | (Iron and steel. Unalloyed steel wire rod for welded fabric and wire with improved adherence.) |
| NF A35-053-1984 | 鋼鐵產品.熱成型或低溫成型制造產品用非合金鋼線材.型號 | (Iron and steel. Non-alloy steel wire rod for products made by hot or cold forming. Types.) |
| NF A35-055-1984 | 鋼鐵產品.涂藥焊條用非合金鋼線材.等級和型號 | (Iron and steel. Wire rod in non-alloy steel for coated electrodes. Grades and types.) |
| NF A35-056-1984 | 鋼鐵產品.氣體保護電弧焊和潛弧焊的焊條用合金鋼和非合金鋼線材.等級和型號 | (Iron and steel. Wire rod in non-alloy and alloy steel for colled electrodes for gas shielded are welding and submerged arc welding. Grades and types.) |
| NF A35-057-1979 | 鋼鐵產品.冷成形高強度機械彈簧鋼絲制造用非合金鋼線材.型號 | (IRON AND STEEL. WIRE RODS MADE OF UNALLOYED STEEL FOR THE MANUFACTURE OF HIGH RESISTING COLD-FORMED SPRING WIRES. TYPES.) |
| NF A35-501-1993 | 非合金結構鋼的熱釓產品.交貨技術條件 | (Hot-rolled products of non alloy structural steels. Technical delivery conditions.) |
| NF A35-520-1-1995 | 非合金鋼熱軋板樁.第1部分:交貨技術條件 | (Hot rolled sheet piling of non alloy steels. Part 1 : technical delivery conditions.) |
| NF A35-552-2-1997 | 淬火鋼和回火鋼.第2部分:非合金優質鋼交貨技術條件 | (Quenched and tempered steels. Part 2 : technical delivery conditions for unaloyed quality steels.) |
| NF A35-558-1999 | 具有特殊高溫和/或低溫性能的緊固件用鋼和鎳合金 | (Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties.) |
| NF A35-567-1984 | 冶金產品.高負載重型機械結構用滲碳合金鋼.牌號.半成品和棒材 | (IRON AND STEEL. CASE HARDENED ALLOY STEELS FOR SOLID HIGHLY-STRESSED MECHANICAL PARTS. GRADES. SEMI-FINISHED PRODUCTS AND BARS.) |
| NF A35-578-2003 | 耐蠕變的鎳和鈷合金鋼 | (Creep resisting steels, nickel and cobalt alloys.) |
| NF A35-579-1998 | 內燃機合金和鋼材 | (Valve steels and alloys for internal combustion engines.) |
| NF A35-584-1999 | 耐熱鋼及鎳合金 | (HEAT RESISTING STEELS AND NICKEL ALLOYS. (EUROPEAN STANDARD EN 10095).) |
| NF A36-205-2-2003 | 壓力容器用扁平鋼軋材.第2部分:具有規定高溫性能的非合金鋼與合金鋼 | (Flat products made of steels for pressure purposes - Part 2 : non-alloy and alloy steels with specified elevated temperature properties.) |
| NF A36-205-4-2003 | 壓力容器用扁平鋼軋材.第4部分:具有規定低溫特性的鎳合金鋼 | (Flat products made of steels for pressure purposes - Part 4 : nickel alloy steels with specified low temperature properties.) |
| NF A36-345-1991 | 冶金產品.鋁合金薄板,薄板和卷材 | (IRON AND STEEL. ALUMINIUM COATED SHEET. CUT LENGTHS AND COILS.) |
| NF A36-602-1988 | 鍋爐和壓力容器用可焊鋼制鍛件.鉬、錳鉬和鉻鉬合金鋼.質量等級和類型 | (WELDABLE STEEL FORGINGS FOR BOILERS AND PRESSURE VESSELS. MO,MN-MO AND CR-MO ALLOY STEELS. GRADES AND TYPES.) |
| NF A36-606-1982 | 鍋爐和壓力容器用焊接鋼沖壓鍛件.鉬、錳鉬和鉻鉬合金鋼.牌號和型號 | (Weldable steel drop forged articles for boilers and pressure vessels. Mo, Mn/Mo and Cr/Mo alloy steels. Grades and types.) |
| NF A36-630-2-1999 | 一般工程用可拆模鋼鍛件.第2部分: 非合金優質鋼和特殊鋼 | (Open die steel forgings for general engineering purposes - Part 2 : non-alloy quality and special steels.) |
| NF A36-630-3-1999 | 一般工程用可拆模鋼鍛件.第3部分:特殊合金鋼 | (Open die steel forging for general engineering purposes - Part 3 : alloy special steels.) |
| NF A36-703-2002 | 包裝用鋼.用于接觸人和動物消費的食品、產品和飲料的扁鋼制品.鍍鉻非合金鋼 | (Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non alloy steel chromium coated.) |
| NF A36-712-1-2002 | 非包裝鋼.用于接觸人和動物消耗的食品、飼料、產品和飲料的涂金屬的扁鋼制品.第1部分:涂鋅或鋅合金(非不銹) | (Unpackaged steels - Metallic coated flat steel products intended for contact with foodstuffs, products and beverages for human and animal consumption - Part 1 : zinc or zinc alloy coated (non-stainles) |
| NF A36-712-2-2002 | 非包裝鋼.用于接觸人和動物消耗的食品、飼料、產品和飲料的涂金屬的扁鋼制品.第1部分:涂鋅或鋅合金(非不銹) | (Unpackaged steels - Metallic coated flat steel products intended for contact with foodstuffs, products and beverages for human and animal consumption - Part 2 : Aluminium coated or aluminium-silicium) |
| NF A36-715-2003 | 未包裝鋼.與人和動物用食品、產品和飲料接觸的長的鋼制品.未鍍涂、非不銹、非合金和合金鋼 | (Unpackaged steels - Long steel products intended for contact with foodstuffs, products and beverages for human and animal consumption - Uncoated, non stainless, unalloyed and alloyed steels.) |
| NF A37-201-1-1995 | 非合金鋼冷成形板垛.第1部分:交貨技術條件 | (Cold formed sheet piling of non alloy steels. Part 1 : technical delivery conditions.) |
| NF A37-402-1983 | 冶金產品.易切削非合金和低合金及冷加工標準鋼主要鋼號的彩色標志 | (IRON AND STEEL. COLOUR MARKING OF THE MAIN NON ALLOY AND LOW ALLOY,COLD-SIZED FREE-CUTTING STEEL GRADES.) |
| NF A37-601-1-1999 | 電纜或遠程通信電纜用鋅或鋅合金鍍膜非合金鋼線.第1部分:陸地電纜(歐洲標準EN10257-1) | (Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Part 1 : land cables.) |
| NF A37-601-2-1999 | 電纜或遠程通信電纜用鋅或鋅合金鍍膜非合金鋼線.第2部分:海底電纜(歐洲標準EN10257-2) | (Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Part 2 : submarine cables.) |
| NF A37-602-2-2001 | 鋼絲和絲產品.鋼絲上的非有色金屬涂層.第2部分:鋅或鋅合金涂層 | (Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2 : zinc or zinc alloy coatings.) |
| NF A37-604-2-2002 | 鋼絲和鋼絲產品.繩索用鋼絲.第2部分:一般繩索用的冷拉非合金鋼絲 | (Steel wire and wire products - Steel wire for ropes - Part 2 : cold drawn non alloy steel wire for ropes for general applications.) |
| NF A37-604-3-2003 | 鋼絲和鋼絲產品.繩索用鋼絲.第3部分:重型裝置用圓形和異型非合金鋼絲 | (Steel wire and wire products - Steel wire for ropes - Part 3 : round and shaped non alloyed steel wire for high duty applications.) |
| NF A37-611-1-2001 | 機械彈簧用鋼絲.第1部分:鉛淬火冷拉制非合金彈簧鋼絲 | (Steel wire for mechanical springs - Part 1 : patented cold drawn unalloyed spring steel wire.) |
| NF A45-051-1984 | 冶金產品.非合金鋼線材.公差 | (Iron and steel. Wire rod in non-alloy steel. Tolerances.) |
| NF A47-301-1976 | 鋼鐵產品.彈簧用非鉛浴淬火合金硬質鋼制三股圓鋼絲 | (IRON AND STEEL. ROUND SPRING STEEL WIRES. PATENTED DRAWN SPRING WIRES OF HARD UNALLOYED STEELS.) |
| NF A49-031-1979 | 鋼管.彎曲半徑.非合金鋼管最小推薦值 | (STEEL TUBES. BENDING RADII. RECOMMENDED MINIMUM VALUES FOR UNALLOYED STEEL TUBES.) |
| NF A49-150-2003 | 包括人類生活用水在內的水成液的傳送用非合金鋼管和管接頭.技術交貨條件 | (Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions.) |
| NF A49-192-1981 | 鋼管.壓力容器用內螺紋非合金鋼焊接套管 | (STEEL TUBES. WELDED RINGS,INTERNALLY THREADED,FOR PRESSURE EQUIPMENT.) |
| NF A49-200-1-2002 | 無縫壓力鋼管.交貨技術條件.第1部分:規定室溫特性的非合金鋼管 | (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1 : non-alloy steel tubes with specified room temperature properties.) |
| NF A49-200-2-2002 | 無縫壓力鋼管.交貨技術條件.第2部分:規定高溫特性的非合金和合金鋼管 | (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2 : non-alloy and alloy steel tubes with specified elevated temperature properties.) |
| NF A49-200-3-2002 | 無縫壓力鋼管.交貨技術條件.第3部分:合金細晶粒結構鋼管 | (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3 : alloy fine grain steel tubes.) |
| NF A49-200-4-2002 | 無縫壓力鋼管.交貨技術條件.第4部分:規定低溫特性的合金和非合金鋼管 | (Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4 : non-alloy and alloy steel tubes with specified low temperature properties.) |
| NF A49-201-1-2002 | 焊接壓力鋼管.交貨技術條件.第1部分:規定室溫特性的非合金鋼管 | (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1 : non-alloy steel tubes with specified room temperature properties.) |
| NF A49-201-2-2002 | 焊接壓力鋼管.交貨技術條件.第2部分:規定高溫特性的電焊合金和非合金鋼管 | (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2 : electric welded non-alloy and alloy steel tubes with specified elevated temperature properties.) |
| NF A49-201-3-2002 | 焊接壓力鋼管.交貨技術條件.第3部分:合金細晶粒結構鋼管 | (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3 : alloy fine grain steel tubes.) |
| NF A49-201-5-2002 | 焊接壓力鋼管.交貨技術條件.第5部分:規定高溫特性的埋弧焊接非合金和合金鋼管 | (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5 : submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties.) |
| NF A49-201-6-2002 | 焊接壓力鋼管.交貨技術條件.第6部分:規定低溫特性的埋弧焊接非合金鋼管 | (Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6 : submerged arc welded non-alloy steel tubes with specified low temperature properties.) |
| NF A49-285-1982 | 鋼管.有質量要求的非合金或合金鋼制對縫焊接橢圓底座.尺寸.交貨技術條件 | (Steel tubes. Unalloyed or alloy steel butt welding elliptic caps with quality requirements. Dimensions. Technical delivery conditions.) |
| NF A49-289-1990 | 鋼管.用于高低溫條件下的對縫焊接管狀配件.非合金、合金和不銹鋼.尺寸.技術交貨條件 | (Steel tubes. Butt welding tubular fittings used at low and high temperature. Non alloy, alloy and stainless steels. Dimensions. Technical delivery conditions.) |
| NF A49-296-1983 | 鋼管.帶質量要求的熔焊非合金或合金鋼制等徑或縮徑焊接三通管.尺寸.交貨技術條件 | (Steel tubes. Unalloyed or alloy steel butt welding tees made by saw process with equal or reduced branches, with quality requirements. Dimensions. Technical delivery conditions.) |
| NF A49-313-1-2003 | 機械工程與綜合工程學用無縫環形鋼管.交貨技術條件.第1部分:非合金和合金鋼管 | (Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1 : non-alloy and alloy steel tubes.) |
| NF A49-502-1-1994 | 非合金和細精粒結構鋼的熱成型結構空心型材.第1部分:交貨技術要求 | (Hot finished structural hollow sections of non-alloy and fine grain structural steels. Part 1 : technical delivery requirements.) |
| NF A49-502-2-1997 | 非合金和細晶粒結構鋼的熱成型結構空心截面.第2部分:公差、尺寸和截面特性 | (Hot finished structural hollow sections of non-alloy and fine grain structural steels. Part 2 : tolerances, dimensions and sectional properties.) |
| NF A49-540-1-1997 | 非合金細晶粒結構鋼的冷成形焊接結構空心型材.第1部分:交貨技術要求 | (Cold form welded structural hollow sections of non-alloy and fine grain steels. Part 1 : technical delivery requirements.) |
| NF A49-540-2-1997 | 非合金細晶粒結構鋼的冷成形結構空心型材.第2部分:公差.尺寸和分段性能 | (Cold form welded structural hollow sections of non-alloy and fine grain steels. Part 2 : tolerances, dimensions and sectional properties.) |
| NF A50-001-1-1998 | 鋁和鋁合金.條款和定義.第1部分:一般條款 | (Aluminium and aluminium alloys. Terms and definitions. Part 1 : general terms.) |
| NF A50-001-3-2003 | 鋁及鋁合金.術語和定義.第3部分:廢料 | (Aluminium and aluminium alloys - Terms and definitions - Part 3 : scrap.) |
| NF A50-100-1994 | 鍛鋁和鋁合金.用于生產與食品接觸的材料和物品的金屬的化學成分 | (Aluminium and aluminium alloys. Wrought products. Chemical composition of semi-products used for the fabrication or articles for use in contact with food.) |
| NF A50-110-1-2003 | 鋁和鋁合金.廢料.第1部分:一般要求、取樣和試驗 | (Aluminium and aluminium alloys - Scrap - Part 1 : general requirements, sampling and tests.) |
| NF A50-110-10-2003 | 鋁和鋁合金.廢料.第10部分:使用過的鋁制飲料罐組成的廢料 | (Aluminium and aluminium alloys - Scrap - Part 10 : scrap consisting of used aluminium beverage cans.) |
| NF A50-110-11-2003 | 鋁和鋁合金.廢料.第11部分:鋁銅散熱器廢料 | (Aluminium and aluminium alloys - Scrap - Part 11 : scrap consisting of aluminium-copper radiators.) |
| NF A50-110-12-2003 | 鋁和鋁合金.廢料.第12部分:一種合金組成的車床切屑 | (Aluminium and aluminium alloys - Scrap - Part 12 : turnings consisting of one single alloy.) |
| NF A50-110-13-2003 | 鋁和鋁合金.廢料.第13部分:兩種或多種合金組成的混合切屑 | (Aluminium and aluminium alloys - Scrap - Part 13 : mixed turnings consisting of two or more alloys.) |
| NF A50-110-14-2003 | 鋁和鋁合金.廢料.第14部分:舊的鋁制包裝件組成的廢料 | (Aluminium and aluminium alloys - Scrap - Part 14 : scrap from post-consumer aluminium packagings.) |
| NF A50-110-15-2003 | 鋁和鋁合金.廢料.第15部分:去除涂層的舊鋁包裝件廢料 | (Aluminium and aluminium alloys - Scrap - Part 15 : decoated aluminium scrap from post-consumer aluminium packagings.) |
| NF A50-110-16-2003 | 鋁和鋁合金.廢料.第16部分:浮渣、碎屑、小金屬棒和金屬粒子組成的廢料 | (Aluminium and aluminium alloys - Scrap - Part 16 : scrap consisting of skimmings, drosses, spills and metallics.) |
| NF A50-110-2-2003 | 鋁和鋁合金.廢料.第2部分:非合金鋁廢料 | (Aluminium and aluminium alloys - Scrap - Part 2 : unalloyed aluminium scrap.) |
| NF A50-110-3-2003 | 鋁和鋁合金.廢料.第3部分:導線和電纜廢料 | (Aluminium and aluminium alloys - Scrap - Part 3 : wire and cable scrap.) |
| NF A50-110-4-2003 | 鋁和鋁合金.廢料.第4部分:由一種可鍛合金組成的廢料 | (Aluminium and aluminium alloys - Scrap - Part 4 : scrap consisting of one single wrought alloy.) |
| NF A50-110-5-2003 | 鋁和鋁合金.廢料.第5部分:同系列兩種或多種可鍛合金組成的廢料 | (Aluminium and aluminium alloys - Scrap - Part 5 : scrap consisting of two or more wrought alloys of the same series.) |
| NF A50-110-6-2003 | 鋁和鋁合金.廢料.第6部分:兩種或多種可鍛合金組成的廢料 | (Aluminium and aluminium alloys - Scrap - Part 6 : scrap consisting of two or more wrought alloys.) |
| NF A50-110-7-2003 | 鋁和鋁合金.廢料.第7部分:鑄件組成的廢料 | (Aluminium and aluminium alloys - Scrap - Part 7 : scrap consisting of castings.) |
| NF A50-110-8-2003 | 鋁和鋁合金.廢料.第8部分:鋁分離工藝中切碎工藝產生的有色金屬材料組成的廢料 | (Aluminium and aluminium alloys - Scrap - Part 8 : scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes.) |
| NF A50-110-9-2003 | 鋁和鋁合金.廢料.第9部分:有色金屬碎料的鋁分離工藝產生的廢料 | (Aluminium and aluminium alloys - Scrap - Part 9 : scrap from aluminium separation processes of non-ferrous shredded materials.) |
| NF A50-120-2000 | 鋁和鋁合金.鍛造產品.生產壓力器件的產品的特殊要求 | (Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment.) |
| NF A50-125-2003 | 鋁及鋁合金.電工用鋁薄板材、帶材和板材 | (Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications.) |
| NF A50-150-1-2002 | 鋁和鋁合金.船用鍛造和鑄造產品:第1部分:規范 | (Aluminium and aluminium alloys - Wrought and cast products for marine applications (shipbuilding, marine and offshore) - Part 1 : specifications.) |
| NF A50-181-1970 | 鋁和鋁合金.薄帶和箔金屬薄片.機械試驗.拉力、沖壓、崩裂 | (ALUMINIUM AND ALUMINIUM ALLOYS. FOILS. MECHANICAL TESTS.) |
| NF A50-261-1977 | 鋁和鋁合金.薄帶鋼和金屬薄片.物理試驗、鋁帶多孔性、可濕性、厚度.鋁帶附著力 | (ALUMINIUM AND ALUMINIUM ALLOYS. FOILS. PHYSICAL TESTS.) |
| NF A50-400-1994 | 鋁和鋁合金.半連續鑄造軋制鑄錠 | (ALUMINIUM AND ALUMINIUM ALLOYS. ROLLING INGOTS. SPECIFICATIONS. (EUROPEAN STANDARD EN 487).) |
| NF A50-421-1994 | 鍛鋁和鋁合金鋼材,帶材和板材.第2部分:機械性能 | (Aluminium and aluminium alloys. Sheet, strip and plate. Part 2 : mechanical properties.) |
| NF A50-422-2003 | 鋁和鋁合金.帶材、薄板和板材.第3部分:熱軋制品的尺寸和外形公差 | (Aluminium and aluminium alloys - Sheet, strip and plate - Part 3 : tolerances on dimensions and form for hot-rolled products.) |
| NF A50-425-1998 | 輕金屬及其合金.危險產品傳輸箱構造可焊接產品 | (ALUMINIUM AND ALUMINIUM ALLOYS. WELDABLE PRODUCTS FOR THE CONSTRUCTION OF TANKS FOR THE TRANSPORTATION OF DANGEROUS GOODS.) |
| NF A50-430-1995 | 鋁和鋁合金.一般用途的圓制品和圓坯的規格 | (Aluminium and aluminium alloys. Circle and circle stock for general applications. Specifications.) |
| NF A50-431-1995 | 鋁和鋁合金.烹調器具生產用圓坯料.規范 | (Aluminium and aluminium alloys. Circle and circle stock for the production of culinary utensils. Specifications.) |
| NF A50-432-1997 | 鋁和鋁合金.通用盤繞涂層的薄板和帶材.規范 | (ALUMINIUM AND ALUMINIUM ALLOYS. COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS. SPECIFICATIONS. (EUROPEAN STANDARD EN 1396).) |
| NF A50-433-1997 | 鋁和鋁合金.踏腳板.規范(歐洲標準EN 1386) | (ALUMINIUM AND ALUMINIUM ALLOYS. TREAD PLATE. SPECIFICATIONS. (EUROPEAN STANDARD EN 1386).) |
| NF A50-434-1-1998 | 鋁及鋁合金.一般用途再軋坯料.第1部分:熱軋制再軋坯料規范 | (ALUMINIUM AND ALUMINIUM ALLOYS. REROLL STOCK FOR GENERAL APPLICATIONS. PART 1 : SPECIFICATIONS FOR HOT-ROLLED REROLL STOCK. (EUROPEAN STANDARD EN 12482-1).) |
| NF A50-434-2-1998 | 鋁及鋁合金.一般用途再軋坯料.第2部分:冷軋制再軋坯料規范 | (ALUMINIUM AND ALUMINIUM ALLOYS. REROLL STOCK FOR GENERAL APPLICATIONS. PART 2 : SPECIFICATIONS FOR COLD-ROLLED REROLL STOCK. (EUROPEAN STANDARD EN 12482-2).) |
| NF A50-435-1996 | 鋁及鋁合金.試驗方法.板材和帶材的凸耳試驗 | (ALUMINIUM AND ALUMINIUM ALLOYS. TEST METHODS. EARING TEST FOR SHEET AND STRIP. (EUROPEAN STANDARD EN 1669).) |
| NF A50-437-1995 | 鋁和鋁合金.罐頭、盒子和蓋子的軋制品 | (Aluminium and aluminium alloys. Rolled products for cans, closures and lids. Specifications.) |
| NF A50-440-1996 | 鋁和鋁合金.薄金屬片.第1部分:檢驗和交貨的技術條件 | (Aluminium and aluminium alloys. Foil. Part 1 : technical conditions for inspection and delivery.) |
| NF A50-441-1996 | 鋁和鋁合金.第2部分:機械性能 | (Aluminium and aluminium alloys. Foil. Part 2 : mechanical properties.) |
| NF A50-442-1996 | 鋁和鋁合金.薄金屬片.第3部分:尺寸公差 | (Aluminium and aluminium alloys. Foil. Part 3 : tolerances on dimensions.) |
| NF A50-443-1997 | 鋁和鋁合金.薄金屬片.第4部分:特性要求 | (ALUMINIUM AND ALUMINIUM ALLOYS. FOILS. PART 4 : SPECIAL PROPERTY REQUIREMENTS. (EUROPEAN STANDARD EN 546-4).) |
| NF A50-452-1984 | 鋁和鋁合金.板狀或帶狀涂漆產品.特性 | (Aluminium and aluminium alloys. Coil coating strip and sheet. Characteristics.) |
| NF A50-461-1996 | 鋁及鋁合金.散熱片坯料.第2部分:機械性能 | (ALUMINIUM AND ALUMINIUM ALLOYS. FINSTOCK. PART 2 : MECHANICAL PROPERTIES. (EUROPEAN STANDARD EN 683-2).) |
| NF A50-462-1996 | 鋁及鋁合金.散熱片坯料.第3部分:尺寸和形狀公差 | (ALUMINIUM AND ALUMINIUM ALLOYS. FINSTOCK. PART 3 : TOLERANCES ON DIMENSIONS AND FORM. (EUROPEAN STANDARD EN 683-3).) |
| NF A50-470-1-2003 | 鋁和鋁合金.結構性鐵路設施用制品.檢查和交貨的技術條件.第1部分:擠壓制品 | (Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 1 : extruded products.) |
| NF A50-506-1982 | 鋁和鋁合金.用滾壓機和壓彎機冷成形型材.一般特性 | (Aluminium and aluminium alloys. Cold formed sections produced by cold rolling and by bending. General characteristics.) |
| NF A50-510-1994 | 鋁和鋁合金.從鍛制產品中獲取的沖擊擠壓加工用鋁塊.規范 | (Aluminium and aluminium alloys. Impact extrusion slugs obtained from wrought products. Specifications.) |
| NF A50-600-1994 | 鋁和鋁合金.適于擠壓的擠壓鑄坯 | (ALUMINIUM AND ALUMINIUM ALLOYS. EXTRUSION INGOTS. SPECIFICATIONS. (EUROPEAN STANDARD EN 486).) |
| NF A50-616-1998 | 鋁和鋁合金.冷拉棒/棍和管.第7部分:無縫管.尺寸,公差和形狀(歐洲標準EN754-7) | (Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Part 7 : seamless tubes, tolerances on dimensions and form.) |
| NF A50-617-1998 | 鋁及鋁合金.冷拔棒材/條材和管材.第8部分:多孔拉拔管尺寸和形狀公差 | (ALUMINIUM AND ALUMINIUM ALLOYS. COLD DRAWN ROD/BAR AND TUBE. PART 8 : PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM. (EUROPEAN STANDARD EN 754-8).) |
| NF A50-620-2004 | 鋁及鋁合金.通用冷拉制圓盤管.規范 | (Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification.) |
| NF A50-632-1995 | 鋁和鋁合金.擠壓棒材/管材和型材.第三部分:擠壓圓形棒材.尺寸和形狀公差 | (Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Part 3 : round bars, tolerances on dimensions and form.) |
| NF A50-633-1995 | 鋁和鋁合金.擠壓棒材/管材和型材.第四部分:擠壓方形條材尺寸和形狀和公差 | (ALUMINIUM AND ALUMINIUM ALLOYS. EXTRUDED ROD/BAR, TUBE AND PROFILES. PART 4 : SQUARE BARS, TOLERANCES ON DIMENSIONS AND FORM. (EUROPEAN STANDARD EN 755-4).) |
| NF A50-634-1995 | 鋁和鋁合金.擠壓棒材/管材和型材.第五部分:擠壓矩形棒材. 尺寸和形狀公差 | (Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Part 5 : rectangular bars, tolerances on dimensions and form.) |
| NF A50-635-1995 | 鋁和鋁合金.擠壓棒材,管材和型材.第六部分:擠壓六角形條材.尺寸和形狀公差 | (Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Part 6 : hexagonal bars, tolerances on dimensions and form.) |
| NF A50-636-1999 | 鋁和鋁合金.擠壓棍棒,管和截面圖.第7部分:無縫管尺寸公差和形狀(歐洲標準EN755-7) | (Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Part 7 : seamless tubes, tolerances on dimensions and form.) |
| NF A50-637-1998 | 鋁和鋁合金.擠壓棍/棒材,管和靠模.第8部分:鉆頭出水口管,尺寸和框架公差 | (ALUMINIUM AND ALUMINIUM ALLOYS. EXTRUDED ROD/BAR, TUBE AND PROFILES. PART 8 : PORTHOLE TUBES, TOLERANCES ON DIMENSIONS AND FORM. (EUROPEAN STANDARD EN 755-8).) |
| NF A50-638-9-2001 | 鋁和鋁合金.擠制棒材/桿材、管及型材.第9部分:型材的尺寸和形狀公差 | (Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9 : profiles, tolerances on dimensions and form.) |
| NF A50-640-1-2001 | 鋁及鋁合金.擠制合金EN AW-6060 and EN AW-6063精密型材.第1部分:檢驗和交貨技術條件 | (Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1 : technical conditions for inspection and delivery.) |
| NF A50-640-2-2001 | 鋁及鋁合金.擠制合金EN AW-6060 and EN AW-6063精密型材.第2部分:尺寸和形狀公差 | (Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2 : tolerances on dimensions and form.) |
| NF A50-645-2004 | 鋁及鋁合金.通用擠制圓盤管.規范 | (Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification.) |
| NF A50-650-2-1997 | 鋁和鋁合金.擠壓棒材.電氣設備的特殊要求 | (Aluminium and aluminium alloys. Drawing stock. Part 2 : specific requirements for electrical applications.) |
| NF A50-650-4-1997 | 鋁和鋁合金.擠壓棒材.焊接設備的特殊要求 | (Aluminium and aluminium alloys. Drawing stock. Part 4 : specific requirements for welding applications.) |
| NF A50-701-1982 | 鋁和鋁合金.拉制線材.根據成分分類 | (Aluminium and aluminium alloys. Extruded and drawn products. Division into groups according to chemical composition.) |
| NF A50-703-1984 | 鋁和鋁合金.拉制方形棒材.尺寸公差和推薦尺寸 | (Aluminium and aluminium alloys. Square section extruded bars. Dimensional tolerances and recommended dimensions.) |
| NF A50-706-1987 | 鋁和鋁合金.Ｌ型截面拉制型材.尺寸公差和推薦尺寸 | (Aluminium and aluminium alloys. Angles. Dimension and form tolerances.) |
| NF A50-707-1981 | 鋁和鋁合金.Ｉ型截面拉制型材.尺寸公差和推薦尺寸 | (Aluminium and aluminium alloys. Extruded shapes : I beams. Tolerances and dimensions.) |
| NF A50-708-1982 | 鋁和鋁合金.Ｔ型截面拉制型材.尺寸公差和推薦尺寸 | (Aluminium and aluminium alloys. Extruded shape : tees. Tolerances and dimensions.) |
| NF A50-709-1981 | 鋁和鋁合金.Ｕ型截面拉制型材.尺寸公差和推薦尺寸 | (Aluminium and aluminium alloys. Extruded shapes ; channels. Tolerances and dimensions.) |
| NF A50-802-1988 | 鋁和鋁合金.大直徑焊接管.尺寸和公差 | (ALUMINIUM AND ALUMINIUM ALLOYS. LARGE DIAMETER WELDED TUBES. DIMENSIONS AND TOLERANCES.) |
| NF A50-821-1971 | 鋁和鋁合金.冷滾軋成形型材.尺寸和尺寸公差 | (ALUMINIUM AND ALUMINIUM ALLOYS. COLD FORMED SECTIONS PRODUCED BY COLD ROLLING. DIMENSIONS AND TOLERANCES.) |
| NF A50-910-1997 | 鋁及鋁合金.鑄鍛造坯料.第1部分:檢查和交貨技術條件(歐洲標準EN 604-1) | (ALUMINIUM AND ALUMINIUM ALLOYS. CAST FORGING STOCK. PART 1 : TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY. (EUROPEAN STANDARD EN 604-1).) |
| NF A50-911-1997 | 鋁及鋁合金.鑄鍛造坯料.第2部分:尺寸和形狀公差(歐洲標準EN 604-2) | (ALUMINIUM AND ALUMINIUM ALLOYS. CAST FORGING STOCK. PART 2 : TOLERANCES ON DIMENSIONS AND FORM. (EUROPEAN STANDARD EN 604-2).) |
| NF A50-920-1996 | 鋁及鋁合金.鍛造坯料.第1部分:檢驗和交貨的技術條件 | (ALUMINIUM AND ALUMINIUM ALLOYS. WROUGHT FORGING STOCK. PART 1 : TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY. (EUROPEAN STANDARD EN 603-1).) |
| NF A50-921-1996 | 鋁及鋁合金.鍛造坯料.第2部分:機械性能 | (ALUMINIUM AND ALUMINIUM ALLOYS. WROUGHT FORGING STOCK. PART 2 : MECHANICAL PROPERTIES. (EUROPEAN STANDARD EN 603-2).) |
| NF A50-922-2000 | 鋁及鋁合金.鍛造坯料.第3部分:尺寸和形狀公差 | (Aluminium and aluminium alloys - Wrought forging stock - Part 3 : tolerances on dimensions and form.) |
| NF A50-931-1994 | 鍛鋁和鋁合金鍛件.第2部分:機械特性和附加特性要求 | (Aluminium and aluminium alloys. Forgings. Part 2 : mechanical properties and additional property requirements.) |
| NF A50-932-3-2002 | 鋁和鋁合金.鍛造.第3部分:尺寸和形式公差 | (Aluminium and aluminium alloys - Forgings - Part 3 : tolerances on dimensions and form.) |
| NF A51-050-1983 | 銅和合金.銅的分類 | (Copper and alloys. Classification of coppers.) |
| NF A51-080-1991 | 形狀記憶合金.詞匯和測量 | (SHAPE MEMORY ALLOYS (SMA). VOCABULARY AND MEASURES.) |
| NF A51-090-1999 | 銅及銅合金.帶材彈性彎折極限的測定 | (Copper and copper alloys. Determination of spring bending limit on strip.) |
| NF A51-102-1999 | 銅和銅合金.熱交換器用的無縫圓管 | (Copper and copper alloys. Seamless, round tubes for heat exchangers.) |
| NF A51-103-1999 | 銅和銅合金.無縫銅毛圓管 | (Copper and copper alloys. Seamless, round copper capillary tubes.) |
| NF A51-118-1998 | 銅和銅合金.銅拉制桿材(線材) | (Copper and copper alloys - Copper drawing stock (wire rod).) |
| NF A51-120-1996 | 銅和銅合金.無縫的.應用于環境衛生和加熱的水和氣體的圓形銅管( 歐洲標準EN1057) | (Copper and copper alloys. Seamless, round copper tubes for water and gas in sanitary and heating applications.) |
| NF A51-121-2003 | 銅和銅合金.帶固體覆層的預絕緣銅管 | (Copper and copper alloys - Pre-insulated copper tubes with solid covering.) |
| NF A51-125-1999 | 銅及銅合金.一般用途的無縫圓管 | (Copper and copper alloys - Seamless, round tubes for general purposes.) |
| NF A51-126-1-2001 | 銅和銅合金.空氣調節和制冷用無縫圓形銅管.第1部分:管道系統用管 | (Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1 : tubes for piping systems.) |
| NF A51-126-2-2001 | 銅和銅合金.空氣調節和制冷用無縫圓形銅管.第2部分:設備用管 | (Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 2 : tubes for equipment.) |
| NF A51-127-2001 | 銅和銅合金.醫用氣體或真空用的無縫圓銅管 | (Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum.) |
| NF A51-128-2002 | 銅和銅合金.電器用無縫銅管 | (Copper and copper alloys - Seamless copper tubes for electrical purposes.) |
| NF A51-129-1999 | 銅和銅合金.熱交換器用無縫軋制翅翼管 | (Copper and copper alloys - Rolled, finned seamless tubes for heat exchangers.) |
| NF A51-201-1998 | 銅和銅合金.一般用途的板材、薄板、帶材和圓材 | (Copper and copper alloys - Plate, sheet, strip and circles for general purposes.) |
| NF A51-202-1998 | 銅和合金銅.煮水器,壓力容器和熱水貯存器用的盤狀,片狀,帶狀,和環狀銅和銅合金 | (Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units.) |
| NF A51-202/A1-2000 | 銅和合金銅.煮水器、壓力容器和熱水貯存器用的板狀、片狀和環狀銅和銅合金 | (Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels, and hot water storage units.) |
| NF A51-203-1998 | 銅和銅合金.彈簧和連接器用帶材 | (Copper and copper alloys - Strip for springs and connectors.) |
| NF A51-204-1998 | 銅和銅合金.導架用帶材 | (Copper and copper alloys - Strip for lead frames.) |
| NF A51-205-2002 | 銅及銅合金.熱浸鍍錫帶 | (Copper and copper alloys - Hot-dip tinned strip.) |
| NF A51-300-1997 | 銅及銅合金.一致性聲明 | (Copper and copper alloys. Declarations of conformity.) |
| NF A51-301-1998 | 銅和銅合金.一般用途棒材 | (Copper and copper alloys - Rod for general purposes.) |
| NF A51-302-1998 | 銅和銅合金.切削加工用棒 | (Copper and copper alloys - Rod for free machining purposes.) |
| NF A51-302/A1-2002 | 銅和銅合金.高速切削用棒材 | (Copper and copper alloys - Rod for free machining purposes.) |
| NF A51-303-1998 | 銅和銅合金.可鍛和未鍛的鍛料 | (Copper and copper alloys - Wrought and unwrought forging stock.) |
| NF A51-304-1998 | 銅和銅合金.一般用途線材 | (Copper and copper alloys - Wire for general purposes.) |
| NF A51-305-1998 | 銅和銅合金.一般用途型材和矩形棒材 | (Copper and copper alloys - Profiles and rectangular bar for general purposes.) |
| NF A51-306-1998 | 銅和銅合金.切削加工用空心棒 | (Copper and copper alloys - Hollow rod for free machining purposes.) |
| NF A51-306/A1-2002 | 銅和銅合金.高速切削用中空棒材 | (Copper and copper alloys - Hollow rod for free machining purposes.) |
| NF A51-307-2003 | 銅和銅合金.焊接和釬焊用棒材和線材 | (Copper and copper alloys - Rod and wire for welding and braze welding.) |
| NF A51-309-2002 | 銅和銅合金.生產電導體用拉制圓銅絲 | (Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors.) |
| NF A51-310-2002 | 銅和銅合金.電子管、半導體器件和真空設施用高傳導性的銅制產品 | (Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications.) |
| NF A51-311-2002 | 銅和銅合金.電氣設備用銅制型材和異型金屬絲 | (Copper and copper alloys - Copper profiles and profiled wire for electrical purposes.) |
| NF A51-430-1996 | 銅和銅合金.建筑用薄板及帶材(歐洲標準EN 1172) | (COPPER AND COPPER ALLOYS. SHEET AND STRIP FOR BUILDING PURPOSES. (EUROPEAN STANDARD EN 1172).) |
| NF A51-600-1999 | 銅及銅合金.廢鋼 | (COPPER AND COPPER ALLOYS. SCRAP. (EUROPEAN STANDARD EN 12861).) |
| NF A53-702-2003 | 銅和銅合金.主合金 | (Copper and copper alloys - Master alloys.) |
| NF A53-704-1998 | 銅和銅合金.銅陰極(歐洲標準EN 1978) | (COPPER AND COPPER ALLOYS. COPPER CATHODES. (EUROPEAN STANDARD EN 1978).) |
| NF A53-705-1999 | 銅和銅合金.鑄塊和鑄件 | (Copper and copper alloys - Ingots and castings.) |
| NF A53-706-1998 | 銅和銅合金.鑄造未最后成形銅產品(歐洲標準EN 1976) | (COPPER AND COPPER ALLOYS. CAST UNWROUGHT COPPER PRODUCTS. (EUROPEAN STANDARD EN 1976).) |
| NF A54-101-1974 | 鎳和鎳合金.非合金鎳軋制產品 | (NICKEL AND NICKEL ALLOYS. ROLLED PRODUCTS IN NON-ALLOYED NICKEL.) |
| NF A54-301-1973 | 鎳和鎳合金.具有延伸特征的鐵鎳合金 | (NICKEL AND NICKEL ALLOYS. IRON-NICKEL ALLOYS WITH PARTICULAR DILATABILITY.) |
| NF A54-401-1973 | 鎳和鎳合金.鎳鉬合金與鎳鉬鉻合金 | (NICKEL AND NICKEL ALLOYS. NICKEL-MOLYBDENUM AND NICKEL-MOLYBDENUM-CHROMIUM-ALLOYS.) |
| NF A55-110-2003 | 鋅和鋅合金.初級鋅 | (Zinc and zinc alloys - Primary zinc.) |
| NF A55-111-2003 | 鋅和鋅合金.二次利用的鋅 | (Zinc and zinc alloys - Secondary zinc.) |
| NF A55-112-1998 | 鋅和鋅合金.取樣方法.規范 | (ZINC AND ZINC ALLOYS. METHOD OF SAMPLING. SPECIFICATIONS. (EUROPEAN STANDARD EN 12060).) |
| NF A55-210-1996 | 鋅及鋅合金.建筑物用軋制平板制品規范 | (Zinc and zinc alloys. Specifications for rolled flat products for building.) |
| NF A55-300-1997 | 鋅和鋅合金.鋅合金壓制鑄件.鑄塊和液體 | (Zinc and zinc alloys. Alloys for foundry purposes. Ingot and liquid.) |
| NF A55-999-2003 | 鉛和鉛合金.廢料.術語和定義 | (Lead and lead alloys - Scraps - Terms and definitions.) |
| NF A56-101-1985 | 減摩作用白合金錠.特性 | (ANTIFRICTION ALLOY INGOTS. CHARACTERISTICS.) |
| NF A56-102-1995 | 錫及錫合金.錫錠 | (TIN AND TIN ALLOYS. INGOT TIN. (EUROPEAN STANDARD EN 610).) |
| NF A56-103-1-1995 | 錫及錫合金.鉛錫合金和鉛錫合金器皿.第1部分:鉛錫合金 | (Tin and tin alloys. Pewter and pewterware. Part 1 : pewter.) |
| NF A56-103-2-1996 | 錫及錫合金.鉛錫合金和鉛錫合金器皿.第2部分:鉛錫合金器皿 | (TIN AND TIN ALLOYS. PEWTER AND PEWTERWARE. PART 2 : PEWTERWARE. (EUROPEAN STANDARD EN 611-2).) |
| NF A57-100-1994 | 鑄鋁合金.用于生產與食品接觸的材料和物品的金屬的化學成分 | (Aluminium and aluminium alloys. Castings. Chemical composition of castings for use in contact with food.) |
| NF A57-110-1995 | 鋁和鋁合金.液體金屬.規范 | (ALUMINIUM AND ALUMINIUM ALLOYS. LIQUID METAL. SPECIFICATIONS. (EUROPEAN STANDARD EN 577).) |
| NF A57-130-1996 | 鋁及鋁合金.冶煉用合金錠.規范(歐洲標準EN 1676) | (Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications.) |
| NF A57-140-1995 | 鋁和鋁合金.通過熔化制造的母合金.規范 | (Aluminium and aluminium alloys. Master alloys produced by melting. Specifications.) |
| NF A57-220-1998 | 鋁和鋁合金.鑄件.化學成分和機械性能(歐洲標準EN 1706) | (Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties.) |
| NF A57-501-1998 | 鎂和鎂合金.鑄造陽極用鎂合金 | (Magnesium and magnesium alloys. Magnesium alloys for cast anodes.) |
| NF A57-502-1998 | 鎂和鎂合金.非合金鎂 | (Magnesium and magnesium alloys. Unalloyed magnesium.) |
| NF A58-002-1999 | 鉛及鉛合金.電纜護套和套筒用鉛合金錠 | (Lead and lead alloys - Lead alloys ingots for electric cable sheathing and for sleeves.) |
| NF A58-003-1999 | 鉛及鉛合金.建筑物用薄鉛板 | (Lead and lead alloys. Rolled lead sheet for building purposes.) |
| NF A58-004-2000 | 鉛及鉛合金.鉛氧化物 | (Lead and lead alloys - Lead oxides.) |
| NF A65-767-1981 | 鎂合金制半成品.Ｕ形型材.尺寸公差和推薦尺寸 | (Semi-finished products made of magnesium alloys. U-sections. Tolerances on dimensions and recommended dimensions.) |
| NF A66-001-1985 | 鑄造產品.有色金屬和合金.重力、低壓和減壓模鑄件的尺寸公差 | (Foundry products. Non ferrous metal and alloys. Cast products. Dimensional tolerances for gravity die castings, low pressure die castings and depression die castings.) |
| NF A66-002-1985 | 鑄造產品.鋁合金和鋅合金.壓力鑄件的尺寸公差 | (Foundry products. Aluminium alloys and zinc alloys. Cast products. Dimensional tolerances for pressure die castings.) |
| NF A70-020-1993 | 珠寶.貴金屬合金的純度 | (JEWELLERY. FINENESS OF PRECIOUS METAL ALLOYS. (EUROPEAN STANDARD EN 29202).) |
| NF A70-021-2001 | 貴金屬.與貴金屬珠寶合金一起使用的釬料的精細度 | (Precious metals - The finenesses of solders used with precious metal jewellery alloys.) |
| NF A80-230-1-1998 | 焊接和合金過程.金屬材料幾何缺陷的分類.第1部分:熔焊(歐洲標準6520-1) | (Welding and allied processes. Classification of geometric imperfections in metallic materials. Part 1 : fusion welding.) |
| NF A81-309-1995 | 焊接可熔化性.非合金和低合金鋼的手工金屬弧焊接用藥皮焊條 | (Welding consumables. Covered electrodes for manual metal arc welding of non alloy and fine grain steels. Classification.) |
| NF A81-311-1994 | 碳鋼、碳錳鋼和微合金鋼的氣體金屬電弧焊絲狀電極和電積物的分類 | (Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification.) |
| NF A81-325-1997 | 焊條.非合金鋼和細晶粒鋼制惰性氣體保護鎢焊接用棒材,線材和鍍層 | (WELDING CONSUMABLES. RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON-ALLOY AND FINE GRAIN STEELS. CLASSIFICATION. (EUROPEAN STANDARD EN 1668).) |
| NF A81-331-1984 | 焊接、硬釬焊和硬焊鋁及鋁合金用填充金屬材料.符號.規范 | (Filler materials for welding, brazing and braze welding aluminium and aluminium alloys. Symbolization. Specifications.) |
| NF A81-350-1997 | 焊條.非合金鋼及細粒鋼的有和無氣體保護的金屬電弧焊接用管狀焊絲.分類(歐洲標準EN 758) | (Welding consumables. Tubular cored electrodes for metal arc welding with and without a gas shield of non aloy and fine grain steels. Classification.) |
| NF A81-363-1994 | 軟釬料合金.化學成分和供貨形式 | (SOFT SOLDER ALLOYS. CHEMICAL COMPOSITIONS AND FORMS. (EUROPEAN STANDARD EN 29453).) |
| NF A81-410-1984 | 鋁和鋁合金.焊接、硬釬焊和釬焊.基礎產品和焊條的選擇 | (ALUMINIUM AND ALUMINIUM ALLOYS. WELDING,BRAZING AND BRAZE WELDING. BASE MATERIALS AND SELECTION OF FILLER MATERIALS.) |
| NF A81-900-1973 | 鋁和鋁合金.焊接.焊劑的使用和檢查 | (ALUMINIUM AND ALUMINIUM ALLOYS. WELDING. USE AND TESTING OF WELDING FLUXES.) |
| NF A87-010-1973 | 鋁和鋁合金.焊接.邊的準備 | (ALUMINIUM AND ALUMINIUM ALLOYS. WELDING. WELD PREPARATIONS.) |
| NF A87-013-3-2001 | 焊接和相關工藝.接頭預處理的推薦方法.第3部分:鋁和鋁合金的金屬焊條惰性氣體保護焊和鎢極惰性氣體保護焊 | (Welding and allied processes - Recommendations for joint preparation - Part 3 : metal inert gas welding and tungsten inert gas welding of aluminium and its alloys.) |
| NF A88-110-2-1992 | 焊工合格鑒定.熔焊.第2部分:鋁及鋁合金件 | (Approval testing of welders. Fusion welding. Part 2 : aluminium and aluminium alloys.) |
| NF A88-110-3-1999 | 焊工合格鑒定.熔焊.第3部分:銅及銅合金件 | (Approval testing of welders. Fusion welding. Part 3 : copper and copper alloys.) |
| NF A88-110-4-1999 | 焊工合格鑒定.熔焊.第4部分:鎳和鎳合金 | (Approval testing of welders. Fusion welding. Part 4 : nickel and nickel alloys.) |
| NF A88-110-5-2000 | 焊工的驗收試驗.熔焊.第5部分:鈦和鈦合金.鋯和鋯合金 | (Approval testing of welders - Fusion welding - Part 5 : titanium and titanium alloys, zirconium and zirconium alloys.) |
| NF A89-101-4-2000 | 焊接.金屬材料焊接的推薦方法.第4部分:鋁和鋁合金的電弧焊 | (Welding - Recommendations for welding of metallic materials - Part 4 : arc welding of aluminium and aluminium alloys.) |
| NF A89-220-1973 | 鋁和鋁合金.焊接.分類和焊接點的檢驗 | (ALUMINIUM AND ALLOY THEREOF. WELDING. CLASSIFICATION AND TESTING OF WELDED JOINTS.) |
| NF A89-232-1994 | 鋁和可焊合金的弧焊接頭.質量缺陷等級導則 | (ARC-WELDED JOINTS IN ALUMINIUM AND ITS WELDABLE ALLOYS. GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS. (EUROPEAN STANDARD EN 30042).) |
| NF A89-234-2001 | 焊接.電子和激光束焊接接頭.缺陷的質量級別導則.第1部分:鋁及其可焊合金 | (Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2 : aluminium and its weldable alloys.) |
| NF A89-310-1973 | 鋁和鋁合金.焊接.基本元件的連接.選擇原則 | (ALUMINIUM AND ALUMINIUM ALLOYS. WELDING. ELEMENTARY TYPES OF ASSEHBLY. SELECTION CRITERIA.) |
| NF A91-001-2000 | 金屬和合金防腐蝕.表面處理、金屬和其他無機鍍層.詞匯. | (Corrosion protection of metals and alloys - Surface treatment, metallic and other inorganic coatings - Vocabulary.) |
| NF A91-081-1987 | 金屬鍍層.錫鎳合金電鍍層.規范和試驗方法 | (Metallic coatings. Electroplated coatings of tin-nickel alloy. Specification and test methods.) |
| NF A91-082-1987 | 金屬鍍層.錫鉛合金電解沉淀.規范和試驗方法 | (METALLIC COATINGS. ELECTROPLATED COATINGS OF TIN-LEAD ALLOYS. SPECIFICATION AND TEST METHODS.) |
| NF A91-091-1987 | 金屬鍍層.工業用的銀和銀合金電解沉淀 | (Metallic coatings. Electrodeposited silver and silver alloy coatings for engineering purposes.) |
| NF A91-092-1-1987 | 金屬鍍層.電解銀和電解合金鍍層的試驗方法.第1部分:鍍層厚度的測定 | (Metallic coatings. Test methods for electrodeposited silver and silver alloys coatings. Part 1 : determination of coating thickness.) |
| NF A91-092-2-1987 | 金屬鍍層.電解銀和電解合金鍍層的試驗方法.第2部分:粘附試驗 | (Metallic coatings. Test methods for electrodeposited silver and silver alloy coatings. Part 2 : adhesion tests.) |
| NF A91-094-1987 | 金屬鍍層.工業用金和鍍金合金電鍍層 | (Metallic coatings. Electrodeposited gold and gold alloy coatings for engineering purposes.) |
| NF A91-095-1-1987 | 金屬鍍層.金和金合金鍍層試驗方法:第1部分:鍍層厚度的測定 | (Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 1 : determination of coating thickness.) |
| NF A91-095-2-1987 | 金屬鍍層.金和金合金鍍層試驗方法:第2部分:環境試驗 | (Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 1 : environmental tests.) |
| NF A91-095-3-1995 | 金屬鍍層.金及金合金電鍍層的試驗方法.第3部分:孔隙率的陽極電解試驗 | (Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 3 : electrographic tests for porosity.) |
| NF A91-095-4-1987 | 金屬鍍層.金和金合金鍍層試驗方法:第4部分:金含量的測定 | (Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 4 : determination of gold content.) |
| NF A91-095-5-1987 | 金屬鍍層.金和金合金鍍層試驗方法:第5部分:粘附試驗 | (Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 5 : adhesion tests.) |
| NF A91-095-6-1995 | 金屬鍍層.電鍍金和金合金鍍層的測試方法.第6部分:殘留鹽類的測定 | (Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Part 6 : determination of the presence of residual salts.) |
| NF A91-103-1969 | 金屬鍍層.鍍鎳和鍍鉻的鋅合金零件的驗收條件 | (Metallic coatings. Acceptance conditions for nickel- and chromium-plated zinc alloy parts.) |
| NF A91-105-2003 | 金屬覆層.自動催化(無電)的鎳磷合金覆層.規范和試驗方法 | (Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods.) |
| NF A91-214-1999 | 熱噴鍍.自熔化合金的熔化和噴鍍(EN ISO 14920) | (Thermal spraying. Spraying and fusing of self-fluxing alloys.) |
| NF A91-400-1987 | 表面處理.鋁及鋁合金的陽極極處理.詞匯 | (Anodizing of aluminium and its alloys. Vocabulary.) |
| NF A91-401-1966 | 金屬表面處理.鋁和鋁合金的陽極處理.(陽極氧化).試驗方法的名稱 | (SURFACE TREATMENT OF METALS. ANODISATION (ANODIC OXIDATION) OF ALUMINIUM AND ITS ALLOYS. NOMENCLATURE OF TEST METHODS.) |
| NF A91-402-1981 | 鋁和鋁合金的陽極處理.(陽極氧化).厚度的測量.剖面的顯微照相 | (Surface treatments of metals. Anodic oxidation of aluminium and its alloys. Thickness measurements.) |
| NF A91-404-1966 | 金屬表面處理.鋁和鋁合金的陽極處理.(陽極氧化).厚度的測量 | (SURFACE TREATMENT OF METALS. ANODIZING (ANODIC OXYDIZING) OF ALUMINIUM AND ITS ALLOYS. MEASUREMENT OF THICKNESS.) |
| NF A91-407-1981 | 鋁和鋁合金的陽極處理.(陽極氧化).通過測量在酸溶液浸泡后重量的損失來進行積砂的檢驗 | (Anodizing of aluminium and its alloys. Assessment of sealing quality by measurement of the loss of mass after immersion in acid solution.) |
| NF A91-408-1985 | 鋁和陽極化的鋁合金.沉砂檢驗.SANODALG蘭滴定試驗 | (Anodized aluminium and aluminium alloys. Assessment of sealing quality. Sanodal “G“ blue drop test.) |
| NF A91-411-1966 | 金屬表面處理.鋁和鋁合金的陽極處理.耐腐蝕的檢驗 | (SURFACE TREATMENT OF METALS. ANODISATION (ANODIC OXIDATION) OF ALUMINIUM AND ITS ALLOYS. CHECK OF CORROSION RESISTANCE.) |
| NF A91-412-1982 | 鋁和鋁合金的陽極處理.彩色氧化層耐人造光的加速試驗 | (Anodizing of aluminium and its alloys. Accelerated test of light fastness of coloured anodic oxide coatings to artificial light.) |
| NF A91-420-1988 | 表面處理.陽極氧化鋁和鋁合金.45°鏡面反射率.總反射率.成象清晰度 | (Surface treatments. Anodized aluminium and aluminium alloys. Specular reflectance at 45 degrees. Total reflectance. Image clarity.) |
| NF A91-423-1988 | 表面處理.鋁和陽極氧化的鋁合金.總反射率的測定.光電反射計法 | (Surface treatments. Anodized aluminium and aluminium alloys. Measurement of total reflectivity using a photoelectric reflectometer.) |
| NF A91-450-1981 | 鋁及其合金的陽極氧化.鋁的陽極氧化物鍍層的一般規范 | (Anodizing of aluminium and its alloys. General specifications for anodic oxide coatings on aluminium.) |
| NF A91-455-1-2001 | 鋁及鋁合金.陽極氧化.第1部分:鋁上裝飾和保護用陽極氧化覆層的規定方法 | (Aluminium and aluminium alloys - Anodizing - Part 1 : method for specifying decorative and protective anodic oxidation coatings on aluminiurm.) |
| NF A91-455-10-1999 | 鋁和鋁合金.陽極化.第10部分:使用磨損噴射試驗裝置對陽極氧化物鍍膜的主要特定磨損抗性的測定 | (Aluminium and aluminium alloys. Anodizing. Part 10 : measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus.) |
| NF A91-455-11-2000 | 鋁和鋁合金.陽極化.第11部分:在20度、45度、60度或85度時測定陽極氧化物涂層的鏡面反射和鏡面毛重 | (Aluminium and aluminium alloys - Anodizing - Part 11 : measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 o, 45 o, 60 o or 85 o.) |
| NF A91-455-12-2000 | 鋁和鋁合金.陽極化.第12部分:用集成球形儀器測量鋁表面反射特性 | (Aluminium and aluminium alloys - Anodizing - Part 12 : measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments.) |
| NF A91-455-13-2000 | 鋁和鋁合金.陽極化.第13部分:用濾光測角儀測量鋁表面反射特性 | (Aluminium and aluminium alloys - Anodizing - Part 13 : measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer.) |
| NF A91-455-14-2000 | 鋁和鋁合金.陽極化.第14部分:用肉眼確定陽極氧化物涂層的圖像清晰度.圖表比例尺法 | (Aluminium and aluminium alloys - Anodizing - Part 14 : visual determination of image clarity of anodic oxidation coatings - Chart scale method.) |
| NF A91-455-15-2000 | 鋁和鋁合金.陽極化.第15部分:陽極氧化物涂層抗變形斷裂的測定 | (Aluminium and aluminium alloys - Anodizing - Part 15 : assessment of resistance of anodic oxidation coatings to cracking by deformation.) |
| NF A91-455-16-2001 | 鋁及鋁合金.陽極氧化.第16部分:陽極氧化覆層連續性檢查.硫酸銅試驗 | (Aluminium and aluminium alloys - Anodizing - Part 16 : check for continuity of thin anodic oxydation coatings - Copper sulfate test.) |
| NF A91-455-17-2001 | 鋁及鋁合金.陽極氧化.第17部分:電介質擊穿潛能的測定 | (Aluminium and aluminium alloys - Anodizing - Part 17 : determination of electric breakdown potential.) |
| NF A91-455-18-2001 | 鋁和鋁合金.陽極氧化.第18部分:點腐蝕評定用額定值系統.圖表法 | (Aluminium and aluminium alloys - Anodizing - Part 18 : Rating system for the evaluation of pitting corrosion - Chart method.) |
| NF A91-455-19-2002 | 鋁及鋁合金.陽極氧化.第19部分:斑蝕評定的等級系統.格柵法 | (Aluminium and aluminium alloys - Anodizing - Part 19 : rating system for the evaluation of pitting corrosion - Grid method.) |
| NF A91-455-2-1999 | 鋁和鋁合金.陽極化.第2部分:陽極氧化物鍍膜單位面積質量的測定(表面密度).重量計法(歐洲標準EN 12373-2) | (Aluminium and aluminium alloys. Anodizing. Part 2 : determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method.) |
| NF A91-455-3-1999 | 鋁和鋁合金.陽極化.第3部分:陽極氧化物鍍膜厚度的測定.用分裂束顯微鏡的非損測量(歐洲標準EN 12373-3) | (Aluminium and aluminium alloys. Anodizing. Part 3 : determination of thickness of anodic oxidation coatings. Non-destructive measurement by split-beam microscope.) |
| NF A91-455-5-1999 | 鋁和鋁合金.陽極化.第5部分:用驗收測量的密封陽極氧化物鍍膜質量評估(歐洲標準EN 12373-5) | (Aluminium and aluminium alloys. Anodizing. Part 5 : assessment of quality of sealed anodic oxidation coatings by measurement of admittance.) |
| NF A91-455-6-1999 | 鋁和鋁合金.陽極化.第6部分:通過對未預先進行酸處理的浸入到磷酸/鉻酸溶液中的質量損失的測量對密封陽極氧 | (Aluminium and aluminium alloys. Anodizing. Part 6 : assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment.) |
| NF A91-455-7-2002 | 鋁及鋁合金.陽極氧化.第7部分:測量經過磷酸和鉻酸溶液酸處理浸漬后的質量損失來評定密封陽極氧化覆層的質量 | (Aluminium and aluminium alloys - Anodizing - Part 7 : assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solut) |
| NF A91-455-8-1999 | 鋁和鋁合金.陽極化.第8部分:紫外燈和有色陽極氧化物加熱鍍膜的相對固定性測定.(歐洲標準EN 12373-8) | (Aluminium and aluminium alloys. Anodizing. Part 8 : determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings.) |
| NF A91-455-9-1999 | 鋁和鋁合金.陽極化.第9部分:使用磨擦輪磨損試驗的陽極氧化物鍍膜的磨損抗性和磨損指數的測定 | (Aluminium and aluminium alloys. Anodizing. Part 9 : measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus.) |
| NF A91-473-2001 | 鋅、鎘、鋁鋅合金和鋅鋁合金的鉻酸鹽轉化涂層.試驗方法 | (Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods.) |
| NF A91-477-2000 | 金屬的防腐蝕.經清洗和沒有清洗的鋁及鋁合金上的鉻酸鹽轉化涂層 | (Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys.) |
| NF A92-020-1990 | 鋁和鋁合金用的搪瓷涂層.試樣的制備 | (VITREOUS AND PORCELAIN ENAMELS FOR ALUMINIUM AND ALUMINIUM ALLOYS. PREPARATION OF TEST SAMPLES.) |
| NF A92-021-1990 | 鋁和鋁合金用的搪瓷涂層.附著力試驗 | (VITREOUS AND PORCELAIN ENAMELS FOR ALUMINIUM AND ALUMINIUM LLOYS. ADHESION TESTS.) |
| NF A95-121-2002 | 金屬粉末(不包括硬質合金粉末).單軸向壓縮時壓塑性(壓縮性)的測定 | (Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression.) |
| NF A95-323/A1-2003 | 不包括硬質合金的燒結金屬材料.橫向斷裂強度的測定.修改件1:精確說明 | (Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength - Amendment 1 : precision statement.) |
| NF A95-381-1983 | 粉末燒結.除硬金屬以外的燒結鋼和燒結合金鋼.總碳量和非結合碳量的測定 | (Powder metallurgy. Sintered steels and alloys excluding hardmetals. Determination of total carbon and non-combined carbon contents.) |
| NF A95-421-1983 | 粉末冶金.硬質合金.洛氏硬度試驗(A標試驗方法) | (Powder metallurgy. Hardmetals. Rockwell hardness test (A-scale-test method).) |
| NF A95-490-1993 | 硬質合金.用X射線熒光法測定金屬元素的含量.溶解法 | (HARDMETALS. DETERMINATION OF CONTENTS OF METALLIC ELEMENTS BY X-RAY FLUORESCENCE. SOLUTION METHOD. (EUROPEAN STANDARD EN 24883).) |
| NF A95-492-1-1993 | 硬質合金.火焰原子吸收光譜法的化學分析.第1部分:一般要求 | (Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 1 : general requirements.) |
| NF A95-492-2-1993 | 硬質合金.火焰原子吸收光譜法的化學分析.第2部分:含量為0.001%-0.02%(m/m)的鈣、鉀、鎂和鈉的測定 | (Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 2 : determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 per cent (m/m).) |
| NF A95-492-3-1993 | 硬質合金.火焰原子吸收光譜法的化學分析.第3部分:含量為0.01%-0.5%(m/m)的鈷、鐵、錳和鎳的測定 | (Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 3 : determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 per cent (m/m).) |
| NF A95-492-4-1993 | 硬質合金.火焰原子吸收光譜法的化學分析.第4部分:含量為0.01%-0.5%(m/m)的鉬、鈦和釩的測定 | (Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 4 : determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 per cent (m/m).) |
| NF A95-492-5-1993 | 硬質合金.火焰原子吸收光譜法的化學分析.第5部分:含量為0.5%-2%(m/m)的鈷、鐵、錳、鉬、鎳、鈦和釩的測定 | (Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 5 : determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 per cent (m/m).) |
| NF A95-492-6-1993 | 硬質合金.火焰原子吸收光譜法進行化學分析.第6部分:含量為0.01%-2%(m/m)的鉻的測定 | (Hardmetals. Chemical analysis by flame atomic absorption spectrometry. Part 6 : determination of chromium in contents from 0,01 to 2 per cent (m/m).) |
| NF A95-701-1977 | 粉末冶金.機械零部件自潤滑軸承用金屬與合金.規范和試驗方法的說明 | (POWDER METALLURGY.METALS AND ALLOYS FOR MECHANICAL PARTS SELF-LUBRICATING BEARINGS. INTERPRETATION OF SPECIFICATIONS AND TEST METHODS.) |
| NF A95-711-1977 | 粉末冶金.機械部件和自潤滑軸承用的合金.鋼號一般命名規則 | (POWDER METALLURGY. ALLOYS FOR MECHANICAL PARTS AND SELF-LUBRICATING BEARINGS. RULES FOR THE CONVETIONAL DESIGNATION OF GRADES.) |
| NF A95-725-1971 | 粉末冶金.機械部件用合金.滲透性鋼的規范 | (POWDER METALLURGY. REQUIREMENTS FOR INFILTRATED STEELS.) |
| NF A95-731-1971 | 粉末冶金.機械部件用合金.燒結青銅的規范 | (POWDER METALLURGY. REQUIREMENTS FOR SINTERED BRONZES.) |
| NF A95-732-1971 | 粉末冶金.機械部件用合金.燒結黃銅的規范 | (POWDER METALLURGY. REQUIREMENTS FOR SINTERED BRASS.) |
| NF C20-130-1987 | 銅導線用銅或銅合金鑲裝式裸套管.規則 | (Crimp-type copper or copper alloy non-insulated lugs for copper conductors. Requirements.) |
| NF C28-925-1996 | 非最終退火裝態下非合金鋼制冷軋電工鋼片和鋼帶 | (Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state.) |
| NF C28-926-1996 | 非最終退火裝態下合金鋼制冷軋電工鋼片和鋼帶 | (Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state.) |
| NF C31-520-1979 | 電路或儀表盤用鋁和鋁合金扁條線 | (Flat aluminium and aluminium alloys bars for switchboards and electrical wirings (with rounded edges).) |
| NF C32-051-2003 | 鉛和鉛合金.電纜的鉛和鉛合金護套和套管 | (Lead and lead alloys - Lead and lead alloys sheaths and sleeves of electric cables.) |
| NF C34-112-2001 | 架空電力導線.鋁鎂硅合金線 | (Conductors for overhead lines - Aluminium-magnesium-silicon alloy wires.) |
| NF C34-800-1977 | 架空接觸線用銅和鎘銅合金制的開槽導線 | (BARRES CONDUCTORS.SLOTTED COPPER-CADMIUM WIRES FOR OVERHEAD CONTACT LINES.) |
| NF C63-061-1973 | 導線的連接（其中至少一根是鋁或鋁合金絕緣導線）的連接.電氣試驗規則 | (LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR. CONNECTION JOINTS FOR CONDUCTORS. ONE AT LEAST OF THEM BEING AND INSULATED. ALUMINIUM OR ALUMINIUM ALLOY CONDUCTOR. ELECTRICAL TEST REQUIREMENTS.) |
| NF C64-450-1987 | 充氣式高壓開關及控制設備用鋁合金澆鑄外殼 | (Cast aluminium alloy enclosures for gas-filled high-voltage swichtgear and controlgear.) |
| NF C64-451-1990 | 高壓充氣開關和控制裝置用鋁和鋁合金煅制外殼.(歐洲標準 EN 50064) | (Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear.) |
| NF C64-4511-1993 | 置于氣體壓力下的高壓裝置用鋁和鋁合金煅制外殼.(歐洲標準 EN 50064).補充件1 | () |
| NF C64-452-1992 | 充氣高壓開關和控制設備用鍛鋁和鑄鋁合金焊接復合外殼 | (Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear.) |
| NF C64-4521-1993 | 充氣高壓開關和控制設備用鍛鋁和鑄鋁合金焊接復合外殼.補充件1 | () |
| NF C90-700-1-3-2002 | 電子組件用連接材料.第1-3部分:電子焊接用電子級釬焊合金及有焊劑和無焊劑的固體焊料的要求 | (Attachment materials for electronic assembly - Part 1-3 : requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications.) |
| NF C93-024-1981 | 電子元件.自動剝離連接.銅或銅合金導線的試驗規范.一般規定 | (ELECTRONIC COMPONENTS. INSULATION DISPLACING TERMINATIONS. TEST SPECIFICATION FOR WIRES WITH COPPER OR COPPER ALLOY CONDUCTOR. GENERAL REQUIREMENTS.) |
| NF C93-771-1996 | 互連結構用材料.第7部分:限制芯材料分規范組.第1節:銅/鐵鑷合金/鑷銅合金 | (Materials for interconnection structures. Part 7 : sectional specification set for restraining core materials. Section 1 : copper/invar/coper.) |
| NF D29-011-7-2001 | 與餐具有關的材料和物件.餐具和凹形餐具.第7部分:銀制,其他貴重金屬和合金制凹形餐桌餐具的特殊要求 | (Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 7 : requirements for table cutlery made of silver, other precious metals and their alloys.) |
| NF D36-406-2004 | 建筑物用閥.建筑物內飲用水給水用手動銅合金和不銹鋼球閥.試驗和要求 | (Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements.) |
| NF E22-513-1987 | 滑動軸承.整體銅合金套筒.尺寸與公差 | (Plain bearings. Solid copper alloy bushes. Dimensions and tolerances.) |
| NF E22-551-1992 | 滑動軸承.多層滑動軸承用的鉛和錫鑄造合金 | (Plain bearings. Lead and tin casting alloys for multilayer plain bearings.) |
| NF E22-552-1986 | 滑動軸承.厚壁多層軸承合金底襯的要求 | (PLAINS BEARINGS. REQUIREMENTS ON BACKINGS FOR THICK-WALLED MULTILAYER BEARINGS.) |
| NF E22-553-1992 | 滑動軸承.銅合金.第1部分:整塊的和多層厚壁滑動軸承用鑄銅合金 | (Plain bearings. Copper alloys. Part 1 : cast copper alloys for solid and multilayer thick-walled plaint bearings.) |
| NF E22-554-1992 | 滑動軸承.銅合金.第2部分:整塊銅合金滑動軸承用鍛銅合金 | (Plain bearing. Copper alloys. Part 2 : wrough copper alloys for solid plain bearings.) |
| NF E22-555-1985 | 滑動軸承.整體軸承用的鋁合金 | (Plain bearings. Aluminium alloy for solid bearings.) |
| NF E25-100-1-1999 | 碳鋼合金制成的緊固件的機械性能.第1部分:螺栓、螺釘和螺柱 | (Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1 : bolts, screws and studs.) |
| NF E29-008-1972 | 管道.壓力和溫度.２３％鎳和４％錳奧氏體球墨合金鑄鐵部件 | (TEMPERATURE AND PRESSURE LIMITATIONS FOR PIPING SYSTEMS MANUFACTURED FROM 23% NICKEL 4% MANGANESE SPHEROIDAL GRAPHITE AUSTENITIC CAST IRON`.) |
| NF E29-009-1972 | 管道.壓力和溫度.２０％鎳和２％鉻奧氏體球墨合金鑄鐵部件 | (TEMPERATURE AND PRESSURE LIMITATIONS FOR PIPING SYSTEMS MANUFACTURED FROM 20% NICKEL 2% CHROMIUM SPHEROIDAL GRAPHITE AUSTENITIC CAST IRON`.) |
| NF E29-043-1990 | 工業管道工程.管道、鍋爐和壓力容器法蘭組件用非合金鋼或合金鋼制螺栓 | (Industrial pipework. Non alloy and alloy. Steel bolting for flanged assemblies of pipeworks, boilers and pressure vessels. Specifications.) |
| NF E29-200-4-2002 | 法蘭及其連接件.按PN標注的管、閥門、配件和附件用圓形法蘭.第4部分:鋁合金法蘭 | (Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4 : aluminium alloy flanges.) |
| NF E29-207-1986 | 工業管道.合金鋼法蘭盤和卡環及復合材料法蘭盤.術語，尺寸，規范 | (INDUSTRIAL PIPEWORK. COPPER ALLOYS FLANGES AND COLLARS AND COMPOSITE FLANGES. TERMINOLOGY. DIMENSIONS. SPECIFICATIONS.) |
| NF E29-303-4-2003 | 閥門.閥體、閥蓋和閥套用材料.第4部分:歐洲標準中規定的銅合金 | (Valves - Materials for bodies, bonnets and covers - Part 4 : copper alloys specified in European Standards.) |
| NF E29-334-2003 | 工業用閥門.銅合金閘閥 | (Industrial valves - Copper alloy gate valves.) |
| NF E29-591-1-1998 | 銅和銅合金.管道配件.第1部分:銅管毛細管終端焊接配件 | (Copper and copper alloys. Plumbing fittings. Part 1 : fittings with ends for capillary soldering or capillary brazing to copper tubes.) |
| NF E29-591-2-1998 | 銅和銅合金.管道配件.第2部分:用于銅管的壓縮終端配件 | (COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 2 : FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES. (EUROPEAN STANDARD EN 1254-2).) |
| NF E29-591-3-1998 | 銅和銅合金.管道配件.第3部分:用于塑料管的壓縮終端配件 | (COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 3 : FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTICS PIPES. (EUROPEAN STANDARD EN 1254-3).) |
| NF E29-591-4-1998 | 銅和銅合金.管道配件.第4部分:用毛細或壓縮終端連接于其它終端的配件 | (COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 4 : FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS. (EUROPEAN STANDARD EN 1254-4).) |
| NF E29-591-5-1998 | 銅和銅合金.管道配件.第4部分:銅管毛細管釬焊短末端配件 | (COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 5 : FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES. (EUROPEAN STANDARD EN 1254-5).) |
| NF E29-745-2000 | 便攜式氣瓶.可再充氣的便攜式焊接鋁合金氣瓶的設計和結構規范 | (Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders.) |
| NF E29-762-1990 | 氣瓶.無縫鋁合金瓶.腐蝕試驗 | (GAS VESSELS. ALUMINIUM ALLOY SEAMLESS GAS CYLINDERS. CORROSION TESTS.) |
| NF E52-031-1987 | 起重配件.合金鋼尖嘴和桿的吊鉤 | (LIFTING APPLIANCES. SHANK HOOK MADE OF ALLOYED STEEL.) |
| NF E66-265-1994 | 有直柄的固體硬質合金端銑刀的尺寸 | (SOLID HARDMETAL END MILLS WITH PARALLEL SHANK. DIMENSIONS.) |
| NF E66-308-1998 | 有圓柱形固定孔和圓角的可轉位硬質合金刀片.尺寸 | (Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole. Dimensions.) |
| NF E66-363-1966 | 高速鋼合金車床刀具.偏刀 | (TURNING TOOLS WITH SPEED STEEL INSERTS. OFFSET SIDE TURNING TOOLS.) |
| NF E66-364-1966 | 高速鋼合金車床刀具.倒角車刀 | (TURNING TOOLS WITH SPEED STEEL INSERTS. OFFSET TURNING TOOLS FOR CORNER WORK.) |
| NF E66-365-1966 | 高速鋼合金車床刀具.外圓車刀 | (STRAIGTH TURNING TOOLS WITH HIGH SPEED TIPS.) |
| NF E66-366-1966 | 高速鋼合金車床刀具.寬臉方頭車刀 | (TURNING TOOLS WITH SPEED STEEL INSERTS. WIDE FACE SQUARE NOSE TURNING TOOLS.) |
| NF E66-367-1966 | 高速鋼合金車床刀具.切槽刀 | (TURNING TOOLS WITH SPEED STEEL INSERTS. PARTING OFF TURNING TOOLS.) |
| NF E66-368-1966 | 高速鋼合金車床刀具.切斷車刀 | (TURNING TOOLS WITH SPEED STEEL INSERTS. CUTTING OFF TOOLS.) |
| NF E66-369-1966 | 高速鋼合金車床刀具.車外螺紋刀具 | (TURNING TOOLS WITH SPEED STEEL INSERTS. EXTERNAL THREADING TOOLS.) |
| NF E66-370-1966 | 高速鋼合金車床刀具.鏜刀 | (TURNING TOOLS WITH SPEED STEEL INSERTS. BORING TOOLS.) |
| NF E66-371-1966 | 高速鋼合金車床刀具.鏜孔端面刀具 | (TURNING TOOLS WITH SPEED STEEL INSERTS. INTERNAL SIDE TURNING TOOLS.) |
| NF E66-372-1966 | 高速鋼合金車床刀具.擴孔鏜刀 | (TURNING TOOLS WITH SPEED STEEL INSERTS. RIGHT ANGLE PARTING OFF TURNING TOOLS.) |
| NF E66-373-1966 | 高速鋼合金車床刀具.車內螺紋刀具 | (TURNING TOOLS WITH SPEED STEEL INSERTS. INTERNAL THREADING TOOLS.) |
| NF E66-740-1995 | 硬質合金的鐓鍛模.術語 | (Hardmetal heading dies. Terminology.) |
| NF E82-110-1982 | 鋁和鋁合金模鍛零件.供貨一般技術條件 | (ALUMINIUM AND ALUMINIUM ALLOY DROP FORGINGS. GENERAL TECHNICAL DELIVERY CONDITIONS.) |
| NF E84-004-1998 | 柵欄用鋼線和線產品.第1部分:鋅和鋅合金涂覆鋼線 | (Steel wire and wire products for fences. Part 1 : zinc and zinc-alloy coated steel barbed wire.) |
| NF E86-031-1989 | 合金鋼或非合金鋼立式鍋爐設備.支腳 | (VERTICAL TANKS OF UNALLOYED AND ALLOY STEEL. SUPPORTING SHOES.) |
| NF E86-032-1989 | 合金鋼或非合金鋼立式鍋爐設備.支承壁 | (VERTICAL TANKS OF UNALLOYED AND ALLOY STEEL. SKIRTS.) |
| NF E86-033-1989 | 非合金鋼或合金鋼立式鍋爐設備.底座 | (VERTICAL TANKS OF UNALLOYED AND ALLOY STEEL. SUBPLATES.) |
| NF F01-810-1990 | 鐵路車輛.非合金鋼或低合金鋼電弧焊和電阻焊接頭.設計與施工規則 | (RAILWAY ROLLING STOCK. ARC AND RESISTANCE WELDED JOINTS OF UNALLOYED OR LOW ALLOYED STEELS. RULES FOR CONCEPTION AND REALIZATION.) |
| NF F01-820-1992 | 鐵路車輛.車身用鋁合金焊接接頭(焊縫) | (RAILWAY ROLLING STOCK. WELDED JOINTS OF PRODUCTS IN ALUMINIUM ALLOY FOR BODYWORK. CHARACTERIZATION.) |
| NF F11-042-1994 | 裝空氣或氮?dú)庥玫囊话悴唤鸬膲毫θ萜?第4部分:用于鐵路運輸車輛空氣制動和輻助氣動設備的鋁合金壓力容器 | (Simple unfired pressure vessels designed to contain air or nirogen. Part 4 : aluminium alloy pressure vessels designed for air braking equipment and auxiliary penumatic equipment for railway rolling stock.) |
| NF F19-303-1996 | 鐵路車輛.鋁和鋁合金用含水涂料單分子薄膜 | (RAILWAY ROLLING STOCK. PAINT MONOCOAT WATERBORNE WITH WATER USED TO ALUMINIUM AND ALUMINIUM`S ALLOIES.) |
| NF F19-350-1998 | 鐵路滾動存貨車.線圈涂層板鋁和鋁合金 | (RAILWAY ROLLING STOCK. COIL COATED SHEETS ALUMINIUM AND ALUMINIUM ALLOYS.) |
| NF F55-310-1993 | 鐵路固定設備.鋁合金信號用柱式支架和門架式結構 | (RAILWAY FIXED EQUIPMENT. POST BRACKETS AND PORTAL STRUCTURES FOR SIGNALLING IN ALUMINIUM ALLOY.) |
| NF F80-105-1982 | 鐵路運輸設備.制造鐵路車輛推薦使用的鋼材.V.適于熱處理的鍛制非合金鋼 | (Railway transport equipment. Recommended steels for railway rolling-stock construction. V : unalloyed forging steels suitable for heat treatment.) |
| NF F80-107-1984 | 鐵路車輛.制造鐵路車輛推薦使用的鋼材.VII.熱處理非合金鋼和特種合金鋼 | (Rolling stock. Recommended steels for stock construction. VII unalloyed and alloy heat treated steels.) |
| NF F80-153-1986 | 通用鐵路設備.扁平產品的冷彎半徑.鋁和鋁合金板和帶噴漆產品的最小彎曲半徑 | (RAILWAY EQUIPMENT. COLD FOLDING RADII FOR PLAT PRODUCTS. MINIMUM FOLDING RADII FOR LAQUERED SHEETS OR BANDS MADE OF ALUMINIUM AND ALUMINIUM ALLOYS.) |
| NF F82-001-1990 | 鐵路車輛.車體框架用的可焊接鋁合金線材 | (RAILWAY ROLLING STOCK. EXTRUDED WELDABLE PRODUCTS IN ALUMINIUM ALLOY FOR BODYWORK.) |
| NF H44-006-1988 | 煙霧發生器.壓力分配用鋁和鋁合金容器（氣霧劑容器型）與膨脹管聯系的底部尺寸公差 | (AEROSOL DISPENSERS. CONTAINERS IN ALUMINIUM AND ALLOYS. TOLERANCES OF THE FUNDAMENTAL DIMENSIONS IN CONNECTION WITH THE CLINCH.) |
| NF J13-005-1968 | 造船.鋁和鋁合金.軋制和拉制產品.可用合金表 | (SHIPBUILDING. ALUMINIUM AND ALUMINIUM ALLOYS. ROLLED AND DRAWN PRODUCTS. LIST OF USEABLE ALLOYS.) |
| NF J95-046-3-2002 | 小艇.外殼構造和建材尺寸.第3部分:材料:鋼、鋁合金、木材和其它材料 | (Small craft - Hull constructions and scantlings - Part 3 : materials : steel, aluminium alloys, wood, other materials.) |
| NF L06-380-20-2003 | 航空航天系列.航空航天結構用焊接及銅焊組件.材料的可焊接性和可銅焊接性.第20部分:均質鋁及鋁合金組件 | (Aerospace series - Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 20 : homogeneous assemblies aluminium and aluminium al) |
| NF L06-380-21-2003 | 航空航天系列.航空航天結構用焊接及銅焊組件.材料的可焊接性和可銅焊接性.第21部分:均質非合金及低合金鋼組 | (Aerospace series - Welded and brazed assemblies for aerospace construction - Weldability and beazability of materials - Part 21 : homgeneous assemblies of unalloyed and low alloy steels.) |
| NF L06-510-1983 | 航空和航天工業中鋁合金數據處理用帶尾柄圓柱形雙刃銑刀的選擇 | (Selection of end mills with shanks to be used in aerospace industry for numerical control machining of aluminium alloys.) |
| NF L07-152-1974 | 鋁合金鉚釘直徑圖形符號的表示 | (SYMBOLIC REPRESENTATION ON DRAWINGS OF RIVET DIAMETERS MADE OF ALUMINIUM ALLOYS.) |
| NF L10-270-1-1993 | 航空和航天系列.鋁和鋁合金產品的試驗方法.第1部分:鍛鋁合金產品的導電性測定 | (Aerospace series. Test methods for aluminium and aluminium alloy products. Part 1 : determination of electrical conductivity of wrought aluminium alloy products.) |
| NF L10-270-5-1993 | 航空和航天系列.鋁和鋁合金產品的試驗方法.第5部分:包層半成品的包層厚度及銅分散度的測定 | (Aerospace series. Test methods for aluminium and aluminium alloy products. Part 5 : determination of cladding thickness and copper diffusion of clad semi-finished products.) |
| NF L10-301-1989 | 航空和航天系列.鈦和鈦合金的干噴沙處理 | (AEROSPACE SERIES. DRY ABRASIVE BLASTING OF TITANIUM AND TITANIUM ALLOYS. (EUROPEAN STANDARD EN 2497).) |
| NF L10-302-1998 | 航空航天系列.規定拉伸強度小于或等于1450MPA的銅、銅合金和鎳合金鋼的鍍鎘 | (AEROSPACE SERIES. CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH INFERIOR OR EQUAL TO 1450 MPA, COPPER, COPER ALLOYS AND NICKEL ALLOYS. (EUROPEAN STANDARD EN 2133).) |
| NF L10-307-1997 | 航空航天系列.耐腐蝕鋼的鈍化和鎳基合金的凈化(歐洲標準EN 2516) | (AEROSPACE SERIES. PASSIVATION OF CORROSION RESISTING STEELS AND DECONTAMINATION OF NICKEL BASE ALLOYS. (EUROPEAN STANDARD EN 2516).) |
| NF L10-308-1997 | 航空航天系列.耐腐蝕鋼和耐熱合金的電解拋光(歐洲標準EN 3769) | (AEROSPACE SERIES. ELECTROLYTIC POLISHING OF CORROSION RESISTING STEELS AND HEAT RESISTING ALLOYS. (EUROPEAN STANDARD EN 3769).) |
| NF L10-309-1997 | 航空和航天系列硫酸鉻中鋁和鋁合金的酸洗 | (AEROSPACE SERIES. CHROMIC-SULPHURIC ACID PICKLE OF ALUMINIUM AND ALUMINIUM ALLOYS. (EUROPEAN STANDARD EN 2334).) |
| NF L10-310-1992 | 航空航天系列.鋁和鍛壓鋁合金的鉻酸陽極化 | (AEROSPACE SERIES. CHROMIC ACID ANODIZING OF ALUMINIUM AND WROUGHT ALUMINIUM ALLOYS. (EUROPEAN STANDARD EN 2101).) |
| NF L10-311-1995 | 航天航空系列.鋁合金的淬硬陽極極化 | (AEROSPACE SERIES. HARD ANODIZING OF ALUMINIUM ALLOYS. (EUROPEAN STANDARD EN 2536).) |
| NF L10-312-1997 | 航天航空系列.鈦及鈦合金的陽極極化(歐洲標準EN 2808) | (Aerospace series. Anodizing of titanium and titanium alloys.) |
| NF L10-315-1992 | 航空航天系列.鋁和鍛壓鋁合金的硫陽極化 | (Aerospace series. Sulphuric acid anodizing of aluminium and wrought aluminium alloys.) |
| NF L10-316-2002 | 航空航天系列.鋁及鋁合金用鉻酸鹽轉化膜(黃色) | (Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys.) |
| NF L10-470-1982 | 航空和航天制造用銅和銅合金鍛制棒材的檢驗和試驗條件 | (INSPECTION AND TEST REQUIREMENTS OF WROUGHT BARS IN COPPER AND COPPER ALLOYS FOR AEROSPACE CONSTRUCTION.) |
| NF L10-471-1983 | 航空和航天制造用銅和銅合金板材帶材的檢驗和試驗條件 | (INSPECTION AND TEST REQUIREMENTS OF SHEETS AND STRIPS IN COPPER AND COPPER ALLOYS FOR AEROSPACE CONSTRUCTION.) |
| NF L10-600-1-1990 | 航空和航天系列.鋁和鋁合金鍛制半成品.技術規范.第1部分:一般要求 | (AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS. TECHNICAL SPECIFICATION. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 2070-1).) |
| NF L10-600-11-1993 | 航空和航天系列.鋁和鋁合金鍛制半成品.技術規范.第1部分:一般要求.補充件1 | () |
| NF L10-600-2-1990 | 航空和航天系列.鋁合鋁合金鍛制半成品.技術規范.第2部分:薄板、帶材、彎曲的型材和厚板 | (AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS. TECHNICAL SPECIFICATION. PART 2 : SHEET,STRIP,FORMED PROFILES AND PLATE. (EUROPEAN STANDARD EN 2070-2).) |
| NF L10-600-3-1990 | 航空和航天系列.鋁合鋁合金鍛制半成品.技術規范.第3部分:棒材和型材 | (AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS. TECHNICAL SPECIFICATION. PART 3 : BAR AND SECTION. (EUROPEAN STANDARD EN 2070-3).) |
| NF L10-600-4-1990 | 航空和航天系列.鋁和鋁合金鍛制半成品.技術規范.第4部分:結構用管子 | (AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PROUDCTS. TECHNICAL SPECIFICATION. PART 4 : TUBE FOR STRUCTURES. (EUROPEAN STANDARD EN 2070-4).) |
| NF L10-600-5-1990 | 航空和航天系列.鋁合鋁合金鍛制半成品.技術規范.第5部分:壓力管 | (AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS. TECHNICAL SPECIFICATION. PART 5 : TUBE USED UNDER PRESSURE. (EUROPEAN STANDARD EN 2070-5).) |
| NF L10-600-6-1990 | 航空和航天系列.鋁合鋁合金鍛制半成品.技術規范.第6部分.鉚接線 | (AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS. TECHNICAL SPECIFICATION. PART 6 : RIVET WIRE. (EUROPEAN STANDARD EN 2070-6).) |
| NF L10-600-7-1990 | 航空和航天系列.鋁合鋁合金鍛制半成品.技術規范.第7部分:鍛工場用的鍛造產品 | (AEROSPACE SERIES. ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS. TECHNICAL SPECIFICATION. PART 7 : WROUGHT FORGING STOCK. (EUROPEAN STANDARD EN 2070-7).) |
| NF L10-601-1-1990 | 航空和航天系列.鉛合金和鎂合金鑄件和鑄錠.技術說明.第1部分:一般要求.(歐洲標準EN 2076-1) | (AEROSPACE SERIES. ALUMINIUM AND MAGNESIUM ALLOY INGOTS AND CASTINGS. TECHNICAL SPECIFICATION. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 2076-1).) |
| NF L10-601-11-1993 | 航空和航天系列.鉛合金和鎂合金鑄件和鑄錠.技術說明.第1部分:一般要求.(歐洲標準EN 2076-1).補充件1 | () |
| NF L10-601-2-1990 | 航空和航天系列.鋁合金和鎂合金鑄件和鑄錠.技術說明.第2部分:重熔用錠.(歐洲標準EN 2076-2) | (AEROSPACE SERIES. ALUMINIUM AND MAGNESIUM ALLOY INGOTS AND CASTINGS. TECHNICAL SPECIFICATION. PART 2 : INGOTS FOR REMELTING. (EUROPEAN STANDARD EN 2076-2).) |
| NF L10-601-3-1990 | 航空和航天系列.鉛合金和鎂合金鑄件和鑄錠.技術說明.第3部分:標準部件和系列部件.(歐洲標準EN 2076) | (AEROSPACE SERIES. ALUMINIUM AND MAGNESIUM ALLOY INGOTS AND CASTINGS. TECHNICAL SPECIFICATION. PART 3 : PRE-PRODUCTION AND PRODUCTION CASTINGS. (EUROPEAN STANDARD EN 2076-3).) |
| NF L10-602-1-1990 | 航空和航天系列.鍛造產品、鍛件和鋁合金模鍛.技術規范.第１部分：一般要求 | (Aerospace series. Aluminium alloy forging stock and forgings. Technical specification. Part 1 : general requirements.) |
| NF L10-602-11-1993 | 航空和航天系列. 鍛造產品、鍛件和鋁合金模鍛.技術規范.第１部分：一般要求(歐洲標準EN 2082-1的補充件) | () |
| NF L10-602-2-1990 | 航空和航天系列.鍛造產品、鍛件和鋁合金模鍛.技術規范.第2部分:鍛造產品 | (Aerospace series. Aluminium alloy forging stock and forgings. Technical specification. Part 2 : forging stock.) |
| NF L10-602-3-1990 | 航空和航天系列.鍛造產品、鍛件和鋁合金模鍛.技術規范.第3部分:鍛件系列和鍛件型號 | (AEROSPACE SERIES. ALUMINIUM ALLOY FORGING STOCK AND FORGINGS. TECHNICAL SPECIFICATION. PART 3 : PRE-PRODUCTION AND PRODUCTION FORGINGS. (EUROPEAN STANDARD EN 2082-3).) |
| NF L10-702-1-1992 | 航空和航天系列.重熔產品和鋼制、鎳基和鈷基合金制模件.技術規范.第1部分:一般要求.(歐洲標準 EN 2103-1) | (AEROSPACE SERIES. STEEL,NICKEL BASE AND COBALT BASE ALLOY REMELTING STOCK AND CASTINGS. TECHNICAL SPECIFICATION. PART 1 GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 2103-1).) |
| NF L10-702-2-1992 | 航空和航天系列.重熔產品和鋼制、鎳基和鈷基合金制模件.技術規范.第2部分:重熔產品.(歐洲標準 EN 2103-2) | (AEROSPACE SERIES. STEEL,NICKEL BASE AND COBALT BASE ALLOY REMELTING STOCK AND CASTINGS. TECHNICAL SPECIFICATION. PART 2 : REMELTING STOCK. (EUROPEAN STANDARD EN 2103-2).) |
| NF L10-702-3-1992 | 航空和航天系列.重熔產品和鋼制、鎳基和鈷基合金制模件.技術規范.第3部分:標準部件及系列部件.(歐洲標準 EN | (AEROSPACE SERIES. STEEL,NICKEL BASE AND COBALT BASE ALLOY REMELTING STOCK AND CASTINGS. TECHNICAL SPECIFICATION. PART 3 : PRE-PRODUCTION AND PRODUCTION CASTINGS. (EUROPEAN STANDARD EN 2103-3).) |
| NF L10-800-1-1994 | 航空航天系列.鈦和鈦合金.煅塊和煅件.技術規范.第1部分:總要求 | (AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOYS. FORGING STOCK AND FORGINS. TECHNICAL SPECIFICATION. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 2858-1).) |
| NF L10-800-2-1994 | 航空航天系列.鈦和鈦合金.煅塊和煅件.技術規范.第2部分:鍛塊 | (AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOYS. FORGING STOCK AND FORGINGS. TECHNICAL SPECIFICATION. PART 2 : FORGING STOCK. (EUROPEAN STANDARD EN 2858-2).) |
| NF L10-800-3-1994 | 航空航天系列.鈦和鈦合金.煅塊和煅件.技術規范.第3部分:預制煅件和鍛件 | (AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOYS. FORGING STOCK AND FORGINS. TECHNICAL SPECIFICATION. PART 3 : PRE-PRODUCTION AND PRODUCTION FORGINGS. (EUROPEAN STANDARD EN 2858-3).) |
| NF L10-801-1-1995 | 航空和航天.鈦和鈦合金預制材料和鑄件.交貨技術條件.第1部分:一般要求 | (AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOY REMELTING STOCK AND CASTINGS. TECHNICAL SPECIFICATION. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 2545-1).) |
| NF L10-801-2-1995 | 航空和航天.鈦和鈦合金預制材料和鑄件.交貨技術條件.第2部分:預制材料 | (AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOY REMELTING STOCK AND CASTINGS. TECHNICAL SPECIFICATION. PART 2 : REMELTING STOCK. (EUROPEAN STANDARD EN 2545-2).) |
| NF L10-801-3-1995 | 航空和航天.鈦和鈦合金制預制材料和鑄件.交貨技術條件.第3部分:試制鑄件和系列鑄件 | (AEROSPACE SERIES. TITANIUM AND TITANIUM ALLOY REMELTING STOCK AND CASTINGS. TECHNICAL SPECIFICATION. PART 3 : PRE-PRODUCTION AND PRODUCTION CASTINGS. (EUROPEAN STANDARD EN 2545-3).) |
| NF L10-805-1993 | 航空和航天.鈦及鈦合金碎屑的回收利用 | (AEROSPACE SERIES. RECYCLING OF TITANIUM AND TITANIUM ALLOY SCRAP. (EUROPEAN STANDARD EN 2955).) |
| NF L12-015-2002 | 航空航天系列.耐熱合金加工的圓形棒材.直徑D≥10mm 或者≤ 180mm.尺寸 | (Aerospace series - Round bars, machined in heat resisting alloys - Diameter D more than or equal to 10 mm and less than or equal to 180 mm - Dimensions.) |
| NF L12-135-2002 | 航空航天系列.耐熱合金制成的熱軋薄板和板材.厚度≥20mm 或者≤100mm.尺寸 | (Aerospaces series - Hot rolled sheets and plates in heat resisting alloys - Thickness a more than or equal to 2,0 mm and less than or equal to 100 mm - Dimensions.) |
| NF L12-610-1968 | 耐熱鋼和鋼合金半成品冷拉無縫圓鋼管.航空和航天工業選用 | (SELECTION OF COLD DRAWN SEAMLESS STEEL TUBES OF CIRCULAR CROSS-SECTION FOR THE AEROSPACE INDUSTRY.) |
| NF L12-612-2002 | 航空航天系列.耐熱合金制成的無縫毛細管.直徑≥0.6mm 或者≤ 2mm.尺寸 | (Aerospace series - Capillary tubes, seamless in heat resisting alloys - Diameter D more than or equal to 0,6 mm and less than or equal to 2 mm - Dimensions.) |
| NF L12-672-2002 | 航空航天系列.流體用耐熱合金制成的圓形管材.直徑D≥3.2mm 和≤100mm.尺寸 | (Aerospace series - Circular tubes, for fluid in heat resisting alloys - Diameter D more than or equal to 3,2 mm and less than or equal to 100 mm - Dimensions.) |
| NF L12-812-2002 | 航空航天系列.耐熱合金焊接用填充桿材和填充金屬絲.直徑≥0.5mm 或者≤5.0mm .尺寸 | (Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter D more than or equal to 0,5 mm and less than or equal to 5,0 mm - Dimensions.) |
| NF L13-100-1998 | 航空航天系列.鑷基合金NI-B41201(NICR14S15B3C).釬焊金屬.粉末和糊劑 | (Aerospace series. Nickel base alloy NI-B41201 (NiCr14Si5B3C). Filler metal for brazing. Powder or paste.) |
| NF L13-101-1998 | 航空航天系列.鑷基合金NI-B41201(NICR14S15B3C).釬焊金屬.粉末和糊劑.帶 | (Aerospace series. Nickel base alloy NI-B41201 (NiCr14Si5B3C). Filler metal for brazing. Tape.) |
| NF L13-102-1998 | 航空航天系列.鑷基合金NI-B41201(NICR14S15B3C).釬焊金屬.粉末和糊劑.無定型箔 | (Aerospace series. Nickel base alloy NI-B41202 (NiCr14Si5B3). Filler metal for brazing. Amorphous foil.) |
| NF L13-103-2001 | 航空航天系列.鎳基合金NI-B41202(NICR14Fe5Si5B3).釬焊用充填金屬.粉末或糊劑 | (Aerospace series - Nickel base alloy NI-B41202 (NiCr14Fe5Si5B3) - Filler metal for brazing - Powder or paste.) |
| NF L13-104-2001 | 航空航天系列.鎳基合金NI-B41203(NICR7FeSi5B3).釬焊用充填金屬.無定型箔 | (Aerospace series - Nickel base alloy NI-B41203 (NiCr7FeSi5B3) - Filler metal for brazing - Amorphous foil.) |
| NF L13-105-1998 | 航空航天系列.鑷基合金NI-B41201(NICR14S15B3C).鉛焊金屬.粉末和糊劑.硼化箔 | (Aerospace series. Nickel base alloy NI-B41203 (NiCr7Si5B3). Filler metal for brazing. Borided foil.) |
| NF L13-106-2001 | 航空航天系列.鎳基合金NI-B41203(NICR7Si5B3Fe3)釬焊用充填金屬.粉末和糊劑 | (Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3Fe3) - Filler metal for brazing - Powder or paste.) |
| NF L13-107-1998 | 航空航天系列.鑷基合金NI-B41203(NICR7S15B3).釬焊金屬.帶 | (Aerospace series. Nickel base alloy NI-B41203 (NiCr7Si5B3). Filler metal for brazing. Tape.) |
| NF L13-108-2001 | 航空航天系列.鎳基合金NI-B40001(NiSi5B3).釬焊用充填金屬.無定型箔 | (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Amorphous foil.) |
| NF L13-109-2001 | 航空航天系列.鎳基合金NI-B40001(NiSi5B3).釬焊用充填金屬.硼化箔 | (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Borided foil.) |
| NF L13-110-2001 | 航空航天系列.鎳基合金NI-B40001(NiSi5B3).釬焊用充填金屬.粉末或糊劑 | (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Powder or paste.) |
| NF L13-111-1998 | 航空航天系列.鑷基合金NI-B40001(NISI5B3).釬焊金屬.帶 | (Aerospace series. Nickel base alloy NI-B40001 (NiSi5B3). Filler metal for brazing. Tape.) |
| NF L13-112-2001 | 航空航天系列.鎳基合金NI-B41001(NiCr19Si7B).釬焊用充填金屬.無定型箔 | (Aerospace series - Nickel base alloy NI-B41001 (NiCr19Si7B) - Filler metal for brazing - Amorphous foil.) |
| NF L13-113-2001 | 航空航天系列.鎳基合金NI-B31001(NiCr19Si10).釬焊用充填金屬.粉末或糊劑 | (Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing - Powder or paste.) |
| NF L13-114-1998 | 航空航天系列.鑷基合金NI-B31001(NICR19SI10).釬焊金屬.帶 | (Aerospace series. Nickel base alloy NI-B31001 (NiCr19Si10). Filler metal for brazing. Tape.) |
| NF L13-115-2001 | 航空航天系列.鎳基合金NI-B13001(NiP11).釬焊用充填金屬.無定型箔 | (Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Amorphous foil.) |
| NF L13-116-2001 | 航空航天系列.鎳基合金NI-B13001(NiP11).釬焊用充填金屬.粉末和糊狀物 | (Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Power or paste.) |
| NF L13-117-2001 | 航空航天系列.鎳基合金NI-B21001(NiCr15B4).釬焊用充填金屬.無定型箔 | (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Amorphous foil.) |
| NF L13-118-2001 | 航空航天系列.鎳基合金NI-B21001(NiCr15B4).釬焊用充填金屬.硼化箔 | (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Borided foil.) |
| NF L13-119-2001 | 航空航天系列.鎳基合金NI-B21001(NiCr15B4).釬焊用充填金屬.粉末或糊狀物 | (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Powder or paste.) |
| NF L13-120-2001 | 航空航天系列.鎳基合金NI-B44101(NiW12Cr10Si4Fe3B3).釬焊用充填金屬.粉末或糊狀物 | (Aerospace series - Nickel base alloy NI-B44101 (NiW12Cr10Si4Fe3B3) - Filler metal for brazing - Powder or paste.) |
| NF L13-121-2001 | 航空系列.鎳基合金 Ni-B46001.非晶態箔 | (Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Amorphous foil.) |
| NF L13-122-2001 | 航空航天系列.鎳基合金NI-B46001(NiCo20Si5B3).釬焊用充填金屬.粉末或糊劑 | (Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Powder or paste.) |
| NF L13-123-1998 | 航空航天系列.鑷基合金NI-B46001(NiCo20SI5B3).釬焊金屬.帶 | (Aerospace series. Nickel base alloy NI-B46001 (NiCo20Si5B3). Filler metal for brazing. Tape.) |
| NF L13-124-2001 | 航空航天系列.鎳基合金NI-B41204(NICR13Si4B3).釬焊用充填金屬.無定型箔 | (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Amorphous foil.) |
| NF L13-125-2001 | 航空航天系列.鎳基合金NI-B41204(NICR13Si4B3).釬焊用充填金屬.硼化箔 | (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Borided foil.) |
| NF L13-126-2001 | 航空航天系列.鎳基合金NI-B41204(NICR13Fe4Si4B3).釬焊用充填金屬.粉末或糊劑 | (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Fe4Si4B3) - Filler metal for brazing - Powder or paste.) |
| NF L13-127-1998 | 航空航天系列.鑷基合金NI-B41204(NICR13SI4B3).釬焊金屬.帶 | (Aerospace series. Nickel base alloy NI-B41204 (NiCr13Si4B3). Filler metal for brazing. Tape.) |
| NF L13-128-2001 | 航空航天系列.鎳基合金NI-B48801(NiMn19Si6Cu4B).釬焊用充填金屬.粉末或糊劑 | (Aerospace series - Nickel base alloy NI-B48801 (NiMn19Si6Cu4B) - Filler metal for brazing - Powder or paste.) |
| NF L13-129-2001 | 航空航天系列.鎳基合金NI-B15701(NiPd34Au30).釬焊用充填金屬.粉末或糊劑 | (Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Powder or paste.) |
| NF L13-130-1998 | 航空航天系列.鑷基合金NI-B15701(NIPD34AV30).釬焊金屬.碾軋箔 | (Aerospace series. Nickel base alloy NI-B15701 (NiPd34Au30). Filler metal for brazing. Rolled foil.) |
| NF L13-131-1998 | 航空航天系列.鑷基合金NI-B15701(NIPD34AV30).釬焊金屬.線 | (Aerospace series. Nickel base alloy NI-B15701 (NiPd34Au30). Filler metal for brazing. Wire.) |
| NF L13-135-2001 | 航空航天系列.銀基合金AG-B10001(AgCu28).釬焊用充填金屬.焊絲 | (Aerospace series - Silver base alloy AG-B10001 (AgCu28) - Filler metal for brazing - Wire.) |
| NF L13-136-2001 | 航空航天系列.銀基合金AG-B12401(AgCu40Zn5Ni).釬焊用充填金屬.焊絲 | (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Wire.) |
| NF L13-137-2001 | 航空航天系列.銀基合金AG-B12401(AgCu40Zn5Ni).釬焊用充填金屬.粉末或糊狀物 | (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Powder or paste.) |
| NF L13-138-2001 | 航空航天系列.銀基合金AG-B12401(AgCu40Zn5Ni).釬焊用填充金屬.卷狀箔 | (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Rolled foil.) |
| NF L13-139-2001 | 航空航天系列.銀基合金AG-B14001(AgCu42Ni2).釬焊用填充金屬.焊絲 | (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Wire.) |
| NF L13-140-2001 | 航空航天系列.銀基合金AG-B14001(AgCu42Ni2).釬焊用填充金屬.粉末或糊狀物 | (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Powder or paste.) |
| NF L13-141-2001 | 航空航天系列.銀基合金AG-B14001(AgCu42Ni2).釬焊用填充金屬.卷狀箔 | (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Rolled foil.) |
| NF L13-142-2001 | 航空航天系列.鈷基合金CO-B41601(CoCr19Ni17Si8W4).釬焊用填充金屬.粉末或糊狀物 | (Aerospace series - Cobalt base alloy CO-B41601 (CoCr19Ni17Si8W4) - Filler metal for brazing - Powder or paste.) |
| NF L13-143-2001 | 航空航天系列.金基合金AU-B40001(AuNi18).釬焊用填充金屬.粉末或糊狀物 | (Aerospace series - Gold base alloy AU-B40001 (AuNi18) - Filler metal for brazing - Powder or paste.) |
| NF L13-144-2001 | 航空航天系列.金基合金AU-B40001.釬焊用填充金屬.滾軋箔 | (Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Rolled foil.) |
| NF L13-145-2001 | 航空航天系列.金基合金AU-B40001.釬焊用填充金屬.金屬絲 | (Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing - Wire.) |
| NF L13-148-2001 | 航空航天系列.鈦合金TI-B17001.釬焊用填充金屬.滾軋箔 | (Aerospace series - Titanium alloy TI-B17001 - Filler metal for brazing - Rolled foil.) |
| NF L13-149-2001 | 航空航天系列.鎳基合金NI-B40002(NiSi4B2).釬焊用填充金屬.無定型箔 | (Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Amorphous foil.) |
| NF L13-150-2001 | 航空航天系列.鎳基合金NI-B40002(NiSi4B2).釬焊用填充金屬.硼化箔 | (Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Borided foil.) |
| NF L13-151-2002 | 航空航天系列.鎳基合金NI-B40002 (NiSi4B2)- 釬焊用填充金屬.粉末或焊膏. | (Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Powder or paste.) |
| NF L13-152-1998 | 航空航天系列.鑷基合金NI-B40002(NISI4B2).釬焊金屬.帶 | (Aerospace series. Nickel base alloy NI-B40002 (NiSi4B2). Filler metal for brazing. Tape.) |
| NF L13-200-2001 | 航空航天系列.耐熱合金NI-WH1801(NICR20Co18Ti3Al2).焊接用填充金屬 | (Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler metal for welding.) |
| NF L13-201-2001 | 航空航天系列.耐熱合金NI-WH2301(NICR22Fe19Mo9Co2).焊接用填充金屬 | (Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding.) |
| NF L13-202-2001 | 航空航天系列.耐熱合金NI-WH2601(NICR19Nb5Mo3Ti).釬焊用填充金屬 | (Aerospace series - Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal for brazing.) |
| NF L13-203-2001 | 航空航天系列.耐熱合金NI-WH3601(NICR22Mo9Nb4).焊接用填充金屬 | (Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding.) |
| NF L13-204-2001 | 航空航天系列.熱阻合金NI-WH1303 (NiCo20Cr20Mo5Ti2Al).焊接用金屬焊料 | (Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) - Filler metal for welding.) |
| NF L13-205-2001 | 航空航天系列.耐熱合金CO-WH4101(CoCr20W15Ni).焊接用填充金屬 | (Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding.) |
| NF L13-206-2001 | 航空航天系列.耐熱合金CO-WH1402(CoCr22Ni22W15).焊接用填充金屬 | (Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding.) |
| NF L13-209-2001 | 航空航天系列.鈦合金TI-W640001.焊接用填充金屬 | (Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding.) |
| NF L13-210-2002 | 航空航天系列.鈦合金TI-W19001.焊接用填充金屬 | (Aerospace series - Titanium alloy TI-W19001- Filler metal for welding.) |
| NF L13-211-2001 | 航空航天系列.耐熱合金NI-WD3201(NiMo25Fe6Cr5).焊接用填充金屬 | (Aerospace series - Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal for welding.) |
| NF L13-212-2001 | 航空航天系列.耐熱合金NI-WH3901(NiCr16Mo15).焊接用填充金屬 | (Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding.) |
| NF L13-215-2002 | 航空航天系列.鋁合金AL-W42201.焊接用填充金屬.焊條 | (Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding - Rod.) |
| NF L13-216-2001 | 航空航天系列.耐熱合金NI-WH1302(NICR20Co13Mo4Ti3Al).焊接用填充金屬.金屬絲和金屬桿 | (Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3Al) - Filler metal for welding - Wire and rod.) |
| NF L13-217-2001 | 航空航天系列.耐熱合金CO-WH4102(CoCr28W20Ni5V1).焊接用填充金屬.金屬絲和金屬桿 | (Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding - Wire and rod.) |
| NF L13-218-2001 | 航空航天系列.耐熱合金CO-WH1401(CoCr26Ni11W8).焊接用填充金屬.金屬絲和金屬桿 | (Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding - Wire and rod.) |
| NF L13-220-2001 | 航空航天系列.耐熱合金NI-WH0001 (NiCr20).焊接用填充金屬.焊絲和焊棒 | (Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding - Wire and rod.) |
| NF L13-228-2001 | 航空航天系列.耐熱合金NI-WH8901(NICR16Ti3Mn2).焊接用填充金屬.金屬絲和金屬桿 | (Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn2) - Filler metal for welding - Wire and rod.) |
| NF L13-229-2001 | 航空航天系列.耐熱合金NI-WH3902 (NICR25Mo10C).焊接用填充金屬.焊絲和焊棒 | (Aerospace series - Heat resisting alloy NI-WH3902 (NiCr25Mo10C) - Filler metal for welding - Wire and rod.) |
| NF L13-230-2001 | 航空航天系列.耐熱合金CO-WH4001(CoCr29W9).焊接用填充金屬.金屬絲和金屬桿 | (Aerospace series - Heat resisting alloy CO-WH4001 (CoCr29W9) - Filler metal for welding - Wire and rod.) |
| NF L13-231-2002 | 航空航天系列.鎂合金鋼MG-W68001. 焊接用填充金屬.焊絲和焊條 | (Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding - Wire and rod.) |
| NF L13-232-2001 | 航空航天系列.鋁合金AL-W46431.焊接用填充金屬.金屬絲和金屬桿 | (Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding - Wire and rod.) |
| NF L14-050-1993 | 航空航天系列.鋁合金AL-P6082-T6.200mm以下或等于200mm的擠壓棒材和型材A或D | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P6082 - T6. EXTRUDED BARS AND SECTIONS A OR D INFERIOR OR EQUAL TO 200 MM. (EUROPEAN STANDARD EN 2326).) |
| NF L14-051-1994 | 航空航天系列.鋁合金AL-P6082-T6.擠壓棒材和型材.a/D≤200mm,周邊粗粒控制 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P6082-, T6. EXTRUDED BARS AND SECTIONS. A OR D INFERIOR OR EQUAL TO 200 MM WITH PERIPHERAL COARSE GRAIN CONTROL. (EUROPEAN STANDARD EN 2636).) |
| NF L14-181-1993 | 航空航天系列.鋁合金AL-P7009-T74.20mm以下或等于20mm至150mm以下或等于150mm的手工鍛材 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009 - T74. HAND FORGINGS 20 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 150 MM. (EUROPEAN STANDARD EN 2093).) |
| NF L14-182-1993 | 航空航天系列.鋁合金AL-P7009-T74.3mm以下或等于3mm至150mm以下或等于150mm的模鍛材 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009 - T74. PIECES MATRICEES 3 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 150 MM. (EUROPEAN STANDARD EN 2094).) |
| NF L14-183-1993 | 航空航天系列.鋁合金AL-P7009-T7452.40mm以下或等于40mm至150mm以下或等于150mm的手工鍛材 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009 - T7452. HAND FORGINGS 40 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 150 MM. (EUROPEAN STANDARD EN 2381).) |
| NF L14-184-1993 | 航空航天系列.鋁合金AL-P7009-T74511.125mm以下或等于125mm的擠壓棒材和型材A或D | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009 - T74511. EXTRUDED BARS AND SECTIONS A OR D INFERIOR OR EQUAL TO 125 MM. (EUROPEAN STANDARD EN 2385).) |
| NF L14-185-1994 | 航空航天系列.鋁合金AL-P7009-T74511.擠壓棒材和型材.a/D≤125mm,周邊粗粒控制 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7009-, T74511. EXTRUDED BARS AND SECTIONS. A OR D INFERIOR OR EQUAL TO 125 MM WITH PERIPHERAL COARSE GRAIN CONTROL. (EUROPEAN STANDARD EN 2630).) |
| NF L14-201-1994 | 航空航天系列.鋁AL-P1050A.H14.0.4mm以下或等于6mm以下或等于6mm的覆層鋁合金板材及帶材 | (AEROSPACE SERIES. ALUMINIUM AL-P1050A. H14. SHEET AND STRIP. 0,4 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2072).) |
| NF L14-204-1994 | 航空航天系列.鋁合金AL-P7075-.T6或T62.0.4mm以下或等于6mm以下或等于6mm的覆層鋁合金板材及帶材 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075-. T6 OR T62. CLAD SHEET AND STRIP. 0,4 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2092).) |
| NF L14-207-1993 | 航空航天系列.鋁合金AL-P7075-T651.6mm以下至80mm以下或等于80mm的鋁合金板 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075 - T651. PLATES 6 MM INFERIOR TO A INFERIOR OR EQUAL TO 80 MM. (EUROPEAN STANDARD EN 2126).) |
| NF L14-208-1993 | 航空航天系列.鋁合金AL-P7075-T73511.100mm以下或等于100mm的擠壓棒材和型材A或D | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075 - T73511. EXTRUDED BARS AND SECTION A OR D INFERIOR OR EQUAL TO 100 MM. (EUROPEAN STANDARD EN 2127).) |
| NF L14-209-1993 | 航空航天系列.鋁合金AL-P7075-T7351.6mm以下或等于6mm至75mm以下或等于75mm的冷拉鋁棒 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075 - T7351. DRAW BARS 6 MM INFERIOR OR EQUAL TO A OR D INFERIOR OR EQUAL TO 75 MM. (EUROPEAN STANDARD EN 2128).) |
| NF L14-210-1994 | 航空航天系列.鋁合金AL-P2024-T3511.擠壓棒材和型材.a/D≤150mm,周邊粗粒控制 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P2024-, T3511. EXTRUDED BARS AND SECTIONS. 1,2 MM INFERIOR OR EQUAL TO A OR D INFERIOR OR EQUAL TO 150 MM WITH PERIPHERAL COARSE GRAIN CONTROL. (EUROPEAN STANDARD EN 2633).) |
| NF L14-211-1994 | 航空航天系列.鋁合金AL-P7075-T73511.擠壓棒材和型材.a/D≤100mm,周邊粗粒控制 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075-, T73511. EXTRUDED BARS AND SECTIONS. A OR D INFERIOR OR EQUAL TO 100 MM WITH PERIPHERAL COARSE GRAIN CONTROL. (EUROPEAN STANDARD EN 2632).) |
| NF L14-215-1994 | 航空航天系列.鋁合金AL-P6061-.T6或T62.0.4mm以下或等于6mm以下或等于6mm的覆層鋁合金板材及帶材 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P6061-. T6 OR T62. SHEET AND STRIP. 0,4 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2694).) |
| NF L14-216-1994 | 航空航天系列.鋁合金AL-P6081-.T6.0.3mm以下或等于6mm以下或等于6mm的覆層鋁合金板材及帶材 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P6081-. T6. SHEET AND STRIP. 0,3 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2695).) |
| NF L14-217-1994 | 航空航天系列.鋁合金AL-P7075-.T6或T62.0.4mm以下或等于6mm以下或等于6mm的覆層鋁合金板材及帶材 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075-. T6 OR T62. SHEET AND STRIP. 0,4 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2696).) |
| NF L14-331-1994 | 航空航天系列.鋁合金AL-P5086-.H111.0.3mm以下或等于6mm以下或等于6mm的覆層鋁合金板材及帶材 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P5086-. H111. SHEET AND STRIP. 0,3 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2693).) |
| NF L14-401-1994 | 航空航天系列.鋁合金AL-P2014A,T4或T42.薄板和帶材.0.4MM≤A≤6MM | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P2014A, T4 OR T42. SHEET AND STRIP. 0,4 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2395).) |
| NF L14-402-1993 | 航空航天系列.鋁合金AL-P2014A,T4511.200mm以上或等于200mm的擠壓棒材和型材 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P2014A - T4511. EXTRUDED BARS AND SECTIONS A OR D SUPERIOR OR EQUAL TO 200 MM. (EUROPEAN STANDARD EN 2100).) |
| NF L14-403-1994 | 航空航天系列.鋁合金AL-P2014A,T6或T62.薄板和帶材.0.4MM≤A≤6MM | (AREOSPACE SERIES. ALUMINIUM ALLOY AL-P2014A, T6 OR T62. SHEET AND STRIP. 0,4 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2089).) |
| NF L14-405-1993 | 航空航天系列.鋁合金AL-P2014A-T6511.150mm以下或等于150mm的擠壓棒材和型材 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P2014A - T6511. EXTRUDED BARS AND SECTIONS A OR D INFERIOR OR EQUAL TO 150 MM. (EUROPEAN STANDARD EN 2384).) |
| NF L14-422-1993 | 航空航天系列.鋁合金AL-P2024-T3511.1.2mm以下或等于1.2mm至150mm以下或等于150mm的擠壓棒材和型材 | (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P2024 - T3511. EXTRUDED BARS AND SECTIONS 1,2 MM INFERIOR OR EQUAL TO A OR D INFERIOR OR EQUAL TO 150 MM. (EUROPEAN STANDARD EN 2318).) |
| NF L14-701-1982 | CuNi3si銅合金.航天制造用棒材 | (COPPER ALLOY BARS (CUNI3SI) FOR AEROSPACE CONSTRUCTION.) |
| NF L14-702-1982 | CuNi１４Al２銅合金.航天制造用棒材 | (COPPER ALLOY BARS (CUNI14AL2) FOR AEROSPACE CONSTRUCTION.) |
| NF L14-703-1982 | CuSn８.５P 銅合金.航天制造用棒材 | (COPPER ALLOY BARS (CUSN8.5P) FOR AEROSPACE CONSTRUCTION.) |
| NF L14-705-1982 | CuAllQNiSFe ４銅合金.航空和航空制造用棒材 | (COPPER ALLOY BARS (CUAL10NI5FE4) FOR AEROSPACE CONSTRUCTION.) |
| NF L14-706-1982 | CuALIlNi５Fe５銅合金.航天制造用棒材 | (COPPER ALLOY BARS (CUAL11NI5FE5) FOR AEROSPACE CONSTRUCTION.) |
| NF L14-707-1982 | CuZn19Al6銅合金.航天制造用棒材 | (COPPER ALLOY CUZN19AL6. BARS FOR AEROSPACE USE.) |
| NF L14-708-1982 | CuZn２３Al４銅合金.航天制造用棒材 | (COPPER ALLOY BARS (CUZN23AL4) FOR AEROSPACE CONSTRUCTION.) |
| NF L14-709-1982 | CuBe1.9 銅合金航天制造用棒材 | (COPPER ALLOY BARS (CUBE1.9) FOR AEROSPACE CONSTRUCTION.) |
| NF L14-710-1983 | CuZn３９Pb１.７ 銅合金.航天制造用棒材 | (COPPER ALLOY BARS (CUZN39PB1.7) FOR AEROSPACE CONSTRUCTION.) |
| NF L14-711-1983 | CuZn３６Ni２銅合金.航天制造用棒材 | (COPPER ALLOY BARS (CUZN36NI2) FOR AEROSPACE CONSTRUCTION.) |
| NF L14-720-1983 | CuBl銅合金.航天制造用板材和帶材 | (COPPER ALLOY SHEET AND STRIP (CU-B-1) FOR AEROSPACE CONSTRUCTION.) |
| NF L14-721-1983 | CuBe１.９ 銅合金.航天制造用板材和帶材 | (COPPER ALLOY SHEET AND STRIP (CUBE1.9) FOR AEROSPACE CONSTRUCTION.) |
| NF L15-113-1972 | 鋁合金板.整個表面的公差 | (ALUMINIUM ALLOY SHEET. TOLERANCE ON TOTAL SURFACE THICKNESS.) |
| NF L15-115-1973 | 鋁合金板 | (ALUMINIUM ALLOY SHEET.) |
| NF L15-120-2002 | 航空航天系列.鋁及鋁合金板.厚度≥0.25mm和厚度≤6mm.尺寸 | (Aerospace series - Sheets, in aluminium and aluminium alloys - Thickness a more than or equal to 0,25 mm and less than or equal to 6 mm - Dimensions.) |
| NF L15-125-2002 | 航空航天系列.鋁合金板.厚度為6mm〈a≤160mm.尺寸 | (Aerospace series - Plates in aluminium alloys - Thickness 6 mm inferior to a inferior or equal to 160 mm - Dimensions.) |
| NF L15-130-1966 | 金屬或有色合金制造的半成品.鈦板.尺寸和公差 | (SEMI-FINISHED PRODUCTS MADE OF METAL OR NON-FERROUS ALLOYS. TITANIUM SHEET,DIMENSIONS AND TOLERANCES.) |
| NF L15-131-2002 | 航空航天系列.鈦合金冷軋薄板材.厚度大于等于0.2 mm 和小于等于6 mm.尺寸 | (Aerospace series - Sheets, cold rolled in titanium alloys - Thickness a more than or equal to 0,2 mm and less than or equal to 6 mm - Dimensions.) |
| NF L15-132-2002 | 航空航天系列.鈦合金冷軋薄板材.厚度大于等于0.2 mm 和小于等于6 mm.尺寸 | (Aerospace series - Sheets, hold rolled in titanium alloys - Thickness a more than or equal to 0,2 mm and less than or equal to 6 mm - Dimensions.) |
| NF L15-135-2002 | 航空航天系列.鈦和鈦合金板材.厚度大于等于6mm 和小于等于100mm.尺寸 | (Aerospace series - Plates in titanium and titanium alloys - Thickness a more than or equal to 6 mm and less than or equal to 100 mm - Dimensions.) |
| NF L15-152-1978 | 鋁帶和鋁合金帶 | (Strip in aluminium and aluminium alloys.) |
| NF L15-155-2001 | 航空航天系列.鋁和鋁合金帶.厚度≤0.25mm至≤3.2mm.尺寸 | (Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm inferior or equal to a inferior or equal to 3,2 mm - Dimensions.) |
| NF L15-312-1972 | 鋁合金拉制圓棒材 | (ROUND DRAWN BARS IN ALUMINIUM ALLOYS.) |
| NF L15-313-2002 | 航空航天系列.鋁及鋁合金拉制圓棒材.公差等級h11.直徑4mm≤ D≤63mm.尺寸 | (Aerospace series - Round bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm inferior or equal to D inferior or equal to 63 mm - Dimensions.) |
| NF L15-314-1972 | 鋁合金拉制圓棒材 | (EXTRUDED ROUND BARS IN ALUMINIUM ALLOYS.) |
| NF L15-315-2002 | 航空航天系列.鋁及鋁合金擠制圓棒材.直徑10mm≤ D ≤ 220mm.尺寸 | (Aerospaces series - Round bars, extruded in aluminium and aluminium alloys - Diameter 10 mm inferior or equal to D inferior or equal to 220 mm - Dimensions.) |
| NF L15-316-2002 | 航空航天系列.鈦和鈦合金圓棒.直徑D≥6mm 和D≤160mm.尺寸 | (Aerospace series - Round bars in titanium and titanium alloys - Diameter D more than or equal to 6 mm and less than or equal to 160 mm - Dimensions.) |
| NF L15-322-1972 | 鋁合金拉制六角形棒材.尺寸和公差 | (HEXAGON DRAWN BARS IN ALUMINIUM ALLOYS.) |
| NF L15-325-2002 | 航空航天系列.鋁及鋁合金拉制六角形棒材.公差等級h11.對邊寬度 7mm≤ a ≤ 63mm.尺寸 | (Aerospace series - Hexagonal bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Width across flats 7 mm inferior or equal to a inferior or equal to 63 mm - Dimensions.) |
| NF L15-332-1972 | 鋁合金拉制方棒材 | (EXTRUDED AND DRAWN SQUARE BARS IN ALUMINIUM ALLOYS.) |
| NF L15-335-2002 | 航空航天系列.鋁及鋁合金拉制方形棒材.公差等級h11.直徑 6mm≤ D ≤50mm.尺寸 | (Aerospace series - Square bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 6 mm inferior or equal to D inferior or equal to 50 mm - Dimensions.) |
| NF L15-340-1972 | 鋁合金拉制扁材 | (EXTRUDED FLAT BARS IN ALUMINIUM ALLOYS.) |
| NF L15-501-1968 | 鋁合金拉制型材.一般公差 | (GENERAL TOLERANCES ON ALUMINIUM ALLOY EXTRUDED SECTIONS.) |
| NF L15-512-1973 | 鋁合金拉制等邊和不等邊角材 | (EXTRUDED ANGLES,EQUAL AND UNEQUAL LEGS,IN ALUMINIUM ALLOYS.) |
| NF L15-515-2001 | 航空航天系列.鋁合金擠壓L型材.尺寸 | (Aerospace series - Extruted L-section, in aluminium alloys - Dimensions.) |
| NF L15-520-1973 | 鋁合金拉制圓頭角材 | (BEADED EXTRUSIONS IN ALUMINIUM ALLOYS.) |
| NF L15-525-2001 | 航空航天系列.鋁合金串珠式擠壓L型材.尺寸 | (Aerospace series - Beaded L-section extruded, in aluminium alloys - Dimensions.) |
| NF L15-530-1973 | 鋁合金拉制Ｕ形型材 | (EXTRUDED CHANNELS IN ALUMINIUM ALLOYS.) |
| NF L15-535-2001 | 航空航天系列.鋁合金擠壓槽型斷面.尺寸 | (Aerospace series - Extruded channel section in aluminium alloys - Dimensions.) |
| NF L15-540-1973 | 鋁合金拉制Ｔ形型材 | (EXTRUDED TEE SECTIONS IN ALUMINIUM ALLOYS.) |
| NF L15-545-2001 | 航空航天系列.鋁合金擠壓T型材.尺寸 | (Aerospace series - Extruded T-section, in aluminium alloys - Dimensions.) |
| NF L15-555-2002 | 航空航天系列.鋁合金擠制型材.一般公差 | (Aerospace series - Extruted section in aluminium alloys - General tolerances.) |
| NF L15-560-1973 | 鋁合金冷彎Ω形型材 | (OMEGA SECTIONS IN ALUMINIUM ALLOYS.) |
| NF L15-570-1973 | 鋁合金冷彎Ｚ形型材 | (ZED SECTIONS IN ALUMINIUM ALLOYS.) |
| NF L15-611-1973 | 鋁合金拉制圓管.通用公差 | (DRAWN TUBES OF CIRCULAR SECTION IN ALUMINIUM ALLOYS. COMMON TOLERANCES.) |
| NF L15-612-1973 | 鋁合金拉制圓管.精制管 | (DRAWN TUBES OF CIRCULAR SECTION IN ALUMINIUM ALLOYS. PRECISION TUBES.) |
| NF L15-640-1973 | 鋁合金拉制方管 | (SQUARE DRAWN TUBES IN ALUMINIUM ALLOYS.) |
| NF L15-641-1973 | 鋁合金拉制矩形管 | (RECTANGULAR DRAWN TUBES IN ALUMINIUM ALLOYS.) |
| NF L15-650-1997 | 航天航空系列.鋁及鋁合金結構用圓管.直徑6MM≤D≤10MM.厚度1MM≤A≤6MM.尺寸(歐洲標準EN 2257) | (Aerospace series. Circular tubes for structures in aluminium and aluminium alloys. Diameter 6 mm inferior or equal to D inferior or equal to 100 mm. Thickness 1 mm inferior or equal to a inferior or equal to 6 mm. Dimensions.) |
| NF L15-651-1997 | 航天航空系列.流體用鋁及鋁合金圓管.直徑3.2MM≤D≤100MM.厚度0.6MM≤A≤2.5MM.尺寸(歐洲標準EN 2258) | (Aerospace series. Circular tubes for fluids in aluminium and aluminium alloys. Diameter 3,2 mm inferior or equal to D inferior or equal to 100 mm. Thickness 0,6 mm inferior or equal to a inferior or equal to 2,5 mm. Dimensions.) |
| NF L15-660-1978 | 鋁合金異形扁管 | (TORPEDO-SHAPED TUBES IN ALUMINIUM ALLOYS.) |
| NF L15-670-1978 | 鈦和鈦合金圓管 | (TUBES OF CIRCULAR SECTION IN TITANIUM AND TITANIUM ALLOYS.) |
| NF L15-675-2002 | 航空航天系列.流體用鈦及鈦合金圓管.寬度公差.直徑4mm≤ D≤ 40mm.尺寸 | (Aerospace series - Circular tubes, fir fluid in titanium alloys - Wide tolerances - Diameter 4 mm inferior or equal to D inferior or equal to 40 mm - Dimensions.) |
| NF L15-811-2002 | 航空航天系列.焊接鈦和鈦合金用填充桿和填充焊絲.直徑 D≥0.5mm 和D≤5.0mm .尺寸 | (Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameters D more than or equal to 0,5 mm and less than or equal to 5,0 mm - Dimensions.) |
| NF L16-001-1991 | 航空航天系列.涂料和清漆.鋁合金試樣表面預加工的方法和類型 | (AEROSPACE SERIES. PAINTS AND VARNISHES. NATURE AND METHOD FOR PREPARATION OF SURFACE OF TEST SPECIMENS IN ALUMINIUM ALLOYS.) |
| NF L16-002-1991 | 航空航天系列.涂料和清漆.鎂合金試樣表面預加工的方法和類型 | (AEROSPACE SERIES. PAINTS AND VARNISHES. NATURE AND METHOD FOR PREPARATION OF SURFACE OF TEST SPECIMENS IN MAGNESIUM ALLOYS.) |
| NF L16-003-1991 | 航空航天系列.涂料和清漆.鈦合金試樣表面預加工的方法和類型 | (AEROSPACE SERIES. PAINTS AND VARNISHES. NATURE AND METHOD FOR PREPARATION OF SURFACE OF TEST SPECIMENS IN TITANIUM ALLOYS.) |
| NF L16-101-1997 | 航空和航天系列.涂料和清漆的試驗方法.耐鋁合金線性腐蝕的檢驗 | (Aerospace series. Test methods for paints and varnishes. Filiform corrosion resistance test on aluminium alloys.) |
| NF L19-101-1-1992 | 航空和航天.用鋁合金制的管形隔間器材.技術規范.一般要求 | (AEROSPACE SERIES. HONEYCOMB MATEIRALS WITH TUBULAR CELLS IN ALUMINIUM ALLOYS. TECHNICAL SPECIFICATION. GENERAL REQUIREMENTS.) |
| NF L19-101-2-1992 | 航空和航天.用鋁合金制的管形隔間器材.技術規范.六邊形管形元件的特殊要求 | (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS IN ALUMINIUM ALLOYS. TECHNICAL SPECIFICATION. SPECIAL REQUIREMENTS FOR HEXAGONAL TUBULAR CELLS.) |
| NF L21-106-1975 | 鉚釘用鋁合金、鋼、耐熱不銹鋼合金線材.尺寸 | (Wires for rivets in aluminium alloys, steel, stainless and heat resisting alloys. Dimensions.) |
| NF L21-107-1975 | 鉚釘用T40非合金鈦線材.尺寸 | (WIRES FOR RIVETS IN T40 PURE TITANIUM. DIMENSIONS.) |
| NF L21-110-1975 | 鉚釘用 T４０非合金鈦線材.技術規范 | (WIRES FOR RIVETS IN T40 PURE TITANIUM. TECHNICAL SPECIFICATION.) |
| NF L21-201-1972 | 鋁合金鉚釘.產品標準 | (ALUMINIUM ALLOY RIVETS. PRODUCT STANDARD.) |
| NF L21-202-1976 | T４０非合金鈦鉚釘.技術規范 | (T40 PURE TITANIUM RIVETS. TECHNICAL SPECIFICATION.) |
| NF L21-203-1974 | 鋼鉚釘.不銹鋼和耐熱合金鉚釘.技術規范 | (STEEL RIVETS. STAINLESS AND HEAT-RESISTING ALLOY RIVETS. TECHNICAL SPECIFICATION.) |
| NF L21-211-1980 | 鋁合金制半埋頭鉚釘(英寸) | (MUSHROOM HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).) |
| NF L21-212-1980 | 鋁合金制平頭鉚釘(英寸) | (PAN HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).) |
| NF L21-213-1980 | 鋁合金制１２０°埋頭鉚釘(英寸) | (120 DEGREES COUNTERSUNK HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).) |
| NF L21-214-1980 | 鋁合金制１２０°半埋頭鉚釘(英寸) | (RAISED 120 DEGREES COUNTERSUNK HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).) |
| NF L21-216-1980 | 鋁合金制９０°埋頭鉚釘(英寸) | (90 DEGREES COUNTERSUNK HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).) |
| NF L21-270-1981 | “SL“型帶T-A6V鈦合金制桿組合鉚釘.技術規范 | (“Sl“ type compound rivet with T-A6V titanium alloys. Technical specification.) |
| NF L21-271-2000 | 緊固件.緊公差T-A6V鈦合金桿并有2024鋁合金環的凸頭鎖緊螺栓 | (Fasteners - Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.) |
| NF L21-272-2000 | 緊固件.緊公差T-A6V鈦合金桿并有2024鋁合金環的100°埋頭鎖緊螺栓 | (Fasteners - Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.) |
| NF L21-273-2000 | 緊固件.緊公差T-A６V鋁合金桿并有XC１０鋼環凸頭鎖緊螺栓 | (Fasteners - Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10.) |
| NF L21-274-2000 | 緊固件.緊公差T-A６V鈦合金桿并有XC１０鋼環１００°埋頭鎖緊螺栓 | (Fasteners - Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10.) |
| NF L21-312-1994 | 航空系列.根據EN 2115標準中鋁合金制一般頭形實心鉚釘 | (AEROSPACES SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2117. INCH BASED SERIES. (EUROPEAN STANDARD EN 2144).) |
| NF L21-313-1994 | 航空系列.根據EN 2115標準中陽極氧化處理鋁合金制一般頭形實心鉚釘 | (AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2117, ANODIZED OR CHROMATED. INCH BASED SERIES. (EUROPEAN STANDARD EN 2145).) |
| NF L21-314-1993 | 航空航天系列.鉚釘,固體.通用頭,鋁合金2017A,英寸系列(EN 2146) | (AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2017A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2146).) |
| NF L21-316-1993 | 航空航天系列.鉚釘,固體.通用頭,鋁合金5056A,英寸系列(EN 2148) | (AEROSPACES SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 5056A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2148).) |
| NF L21-317-1996 | 航空系列.根據EN 2117標準中陽極氧化處理的鋁合金制一般頭形實心鉚釘 | (Aerospace series. Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series.) |
| NF L21-322-1993 | 航空航天系列.鉚釘,固體,100級常規有園頂?shù)臄U(kuò)鉆頭,鋁合金2117A,英寸系列(EN 2551) | (AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2117, INCH BASED SERIES. (EUROPEAN STANDARD EN 2551).) |
| NF L21-323-1993 | 航空系列.帶圓頂?shù)?鋁合金2177,陽極或鉻酸鹽處理的100級額定嵌入埋頭孔的頭,固體,鉚釘 | (AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2117, ANODIZED OR CHROMATED, INCH BASED SERIES. (EUROPEAN STANDARD EN 2552).) |
| NF L21-324-1993 | 航空航天系列.鉚釘,固體,100級常規有園頂?shù)臄U(kuò)鉆頭,鋁合金2017A,英寸系列(EN 2553) | (AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2017A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2553).) |
| NF L21-326-1993 | 航空航天系列.鉚釘,固體,100級常規有園頂?shù)臄U(kuò)鉆頭,鋁合金5056A, 英寸系列(EN 2555) | (AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 5056A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2555).) |
| NF L21-327-1993 | 航空航天系列.鉚釘,固體,100級常規有園頂?shù)臄U(kuò)鉆頭,鋁合金5056A, 陽極氧化處理和鉻酸處理,英寸系列(EN 2556) | (AEROSPACE SEREIS. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 5056A, ANODIZED OR CHROMATED, INCH BASED SERIES. (EUROPEAN STANDARD EN 2556).) |
| NF L21-414-1996 | 航空系列.耐高溫鎳基合金鋼NI-P11制鍍鎘帶通用頭的全鉚釘.英制系列 | (AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P11, CADMIUM PLATED, INCH BASED SERIES. (EUROPEAN STANDARD EN 3141).) |
| NF L21-415-1996 | 航空系列.耐高溫鎳基合金鋼NI-P11制帶通用頭的全鉚釘.英制系列 | (AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P11, INCH BASED SERIES. (EUROPEAN STANDARD EN 3142).) |
| NF L22-740-1992 | 航空航天系列.合金鋼制帶頭的銷釘,緊公差桿.技術規范 | (Aerospace series. Pins, headed, close tolerance shank, in alloy steel. Technical specification.) |
| NF L23-161-1996 | 航空系列.陽極氧化或鉻酸鈍化的鋁合金平墊圈 | (Aerospace series. Washers, flat, in aluminium alloy, anodized or chromated.) |
| NF L23-164-1995 | 航空系列.鍍鎘合金鋼用凹形墊片 | (AEROSPACE SERIES. WASHERS, CONCAVE, IN ALLOY STEEL, CADMIUM PLATED. (EUROPEAN STANDARD EN 2648).) |
| NF L23-165-1996 | 航空系列.鋁合金制陽極化或鉻酸鈍化的大外徑平墊圈 | (AEROSPACE SERIES. WASHERS, FLAT, LARGE DIAMETER, IN ALUMINIUM ALLOY, ANODIZED OR CHROMATED. (EUROPEAN STANDARD EN 2912).) |
| NF L24-020-1989 | 航空和航天.1100MPa強度級和MJ螺紋合金鋼螺釘.供應品的規范 | (AEROSPACE. ALLOY STEEL BOLTS WITH STRENGTH CLASSIFICATION 1100 MPA AND MJ THREADS. PROCUREMENT SPECIFICATION.) |
| NF L24-025-1989 | 航天.突出頭合金鋼螺釘.1250MPa強度的等級和MJ螺紋.供應品的規范 | (AEROSPACE. ALLOY STEEL PROTRUDING HEAD BOLTS WITH STRENGTH CLASSIFICATION 1250 MPA AND MJ THREADS. PROCUREMENT SPECIFICATION.) |
| NF L24-030-1997 | 航空航天系列.鎳基合金NI-PH2601(鉻鎳鐵合金718)制耐熱MJ螺紋螺栓.等級:1275MPA(室溫)/650℃.技術規范(歐洲 | (AEROSPACE SERIES. BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718). CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2583).) |
| NF L24-102-1997 | 航空和航天系列.凸臺,細六角頭,緊配合公差柄,短螺紋,陽極化,MOS2潤滑,鈦合金制螺栓.等級:1100MPA(室溫下)/3 | (Aerospace series. Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature) / 315 degrees celsius.) |
| NF L24-104-1995 | 航空航天系列.鍍鎘合金鋼的短螺紋緊公差標準手柄標準六角螺栓.分類:1100MPA(環境溫度)/235度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 1 100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2859).) |
| NF L24-107-1995 | 航空航天系列.鍍鎘合金鋼的短螺紋粗公差標準手柄標準六角螺栓.分類:900MPA(環境溫度)/235度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2889).) |
| NF L24-108-1995 | 航空航天系列.鍍鎘合金鋼的帶螺紋頭的標準六角螺栓.分類:900MPA(環境溫度)/235度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3112).) |
| NF L24-109-1997 | 航空航天系列.陽極化MOS2潤滑鈦合金制標準六角頭、螺紋頭螺絲.等級:1100MPA(室溫)/315℃(歐洲標準EN 3308) | (AEROSPACE SERIES. SCREWS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3308).) |
| NF L24-118-1998 | 航空航天系列.螺栓,六角頭,脫開桿,長螺紋耐熱鑷合金NI-P100HT(INCONEL 718).分類:1275MPA(在環境溫度下)/65 | (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718). CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3008).) |
| NF L24-119-1998 | 航空航天系列.螺栓,六角頭,脫開桿,長螺紋耐熱鑷合金NI-P100HT(INCONEL 718),鍍銀.分類:1275MPA(在環境溫度 | (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED. CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3009).) |
| NF L24-120-1998 | 航空航天系列.螺栓,六角頭,脫開桿,長螺紋耐熱鑷合金NI-P101HT(WASPALOY).分類:1210MPA(在環境溫度下)/730攝 | (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY). CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3010).) |
| NF L24-121-1998 | 航空航天系列.螺栓,六角頭,脫開桿,長螺紋耐熱鑷合金NI-P101HT(WASPALOY)鍍銀.分類:1210MPA(在環境溫度下)/7 | (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED. CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3011).) |
| NF L24-130-1997 | 航空航天系列.合金鋼鍍鎘100度埋頭、槽頭、螺紋頭螺絲.等級:900MPA(室溫)/235℃(歐洲標準EN 2652) | (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SLOTTED, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2652).) |
| NF L24-133-1997 | 航空和航天系列.100度通用沉頭,偏移十字槽,緊配合普通柄,短螺紋,鍍鎘,合金鋼制螺絲.等級:1100MPA(室溫下)/2 | () |
| NF L24-134-1997 | 航空和航天系列.100度減徑沉頭,偏移十字槽,緊配合普通柄,短螺紋,陽極化,MOS2潤滑,鈦合金制螺絲.等級:1100MP | () |
| NF L24-135-1997 | 航空和航天系列.100度減徑沉頭,偏移十字槽,緊配合普通柄,短螺紋,鍍鎘,合金鋼制螺絲.等級:1100MPA(室溫下)/2 | () |
| NF L24-161-1997 | 航空和航天系列.合金鋼鍍鎘矩形頂蓋六角形承口粗公差標準柄中等長度螺紋螺絲.等級:1100MPA(室溫下)/235℃( | (AEROSPACE SERIES. SCREWS, CAP HEAD, HEXAGON SOCKET, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3303).) |
| NF L24-179-1995 | 航空航天系列.鍍鎘合金鋼的帶螺紋頭有槽平頭螺栓.分類:900MPA(環境溫度)/235度 | (AEROSPACE SERIES. SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2649).) |
| NF L24-182-1996 | 航空和航天.用MoS2潤滑,陽極化,鈦合金制,短螺紋,帶翼型十字槽的平頭螺釘.等級:1100MPa(室溫下)/315℃ | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1 100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2884).) |
| NF L24-183-1996 | 航空和航天.鍍鎘,合金鋼制,短螺紋,帶翼型十字槽的平頭螺釘.等級:900MPa(室溫下)/235℃ | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2885).) |
| NF L24-184-1996 | 航空和航天系列.鍍鎘合金鋼制短螺紋緊公差標準柄帶翼型十字槽的盤形頭螺絲.分類:900MPa(環境溫度)/235℃(歐 | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRICUFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2886).) |
| NF L24-185-1996 | 航空和航天系列.鍍鎘合金鋼制短螺紋緊公差標準柄帶翼型十字槽的盤形頭螺絲.分類:1100MPa(環境溫度)/235℃( | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2897).) |
| NF L24-186-1997 | 航空和航天系列.平頭,偏移十字槽,緊配合普通柄,短螺紋,陽極化,MOS2潤滑,鈦合金鋼制螺絲.等級:1100MPA(室溫 | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3037).) |
| NF L24-188-1997 | 航空和航天系列.平頭,偏移十字槽,螺紋到頂部,陽極化,MOS2潤滑,鈦合金鋼制螺絲.等級:1100MPA(室溫下)/315℃ | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3307).) |
| NF L24-221-1996 | 航空和航天.耐高溫鎳基合金NI-P100HT(因康鎳 718)制長螺紋細螺桿十二角螺絲釘.等級:1275 Mpa(室溫外)/650℃ | (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718). Classification : 1 275 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-222-1996 | 航空和航天.耐高溫鎳基合金NI-P100HT(因康鎳 718)制鍍銀長螺紋細螺桿十二角螺絲釘.等級:1275 Mpa(環境溫度) | (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718), silver plated. Classification : 1 275 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-224-1994 | 航空和航天系列.耐熱鎳基合金NI-P101HT用螺栓,雙六角頭,緊公差柄,中長螺紋.分類.1210MPa(室溫)/730℃ | (AEROSPACE SERIES. BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY). CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (NORME EUROPEENNE EN 3063).) |
| NF L24-225-1996 | 航空航天.加高螺母用耐高溫鎳基合金NI-P101HT(WASPALOY)中長螺紋緊公差十二角螺絲釘.分類:1210Mpa(室溫)/73 | (Aerospace series. Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), for increased height nuts. Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.) |
| NF L24-228-1996 | 航空和航天系列.用MoS2潤滑陽極化鈦合金制短螺紋緊公差標準柄標準雙六角頭螺栓.分類:1100MPa(環境溫度)/315 | (AEROSPACE SERIES. BOLTS, NORMAL BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2870).) |
| NF L24-229-1996 | 航空和航天系列.鈍化耐熱鎳基合金制制中長螺紋緊公差標準柄大六角頭螺栓.分類:1550MPa(環境溫度)/315℃(歐 | (AEROSPACE SERIES. BOLTS, LARGE BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, PASSIVATED. CLASSIFICATION : 1550 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2874).) |
| NF L24-231-1996 | 航空和航天.耐高溫鎳基合金NI-P100HT(因康鎳 718)制長螺紋細螺桿十二角螺絲釘.等級:1210 Mpa(室溫外)/730℃ | (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy). Classification : 1 210 MPa (at ambient temperature) / 730 degrees celsius.) |
| NF L24-232-1996 | 航空和航天.耐高溫鎳基合金NI-P101HT(Waspaloy 一種耐高溫?zé)徭嚮辖?制鍍銀長螺紋細螺桿十二角螺絲釘.等級 | (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), silver plated. Classification : 1 210 MPa (at ambient temperature) / 730 degrees celsius.) |
| NF L24-383-1996 | 航空和航天.耐高溫鎳基合金NI-P100HT(INCONE/718)長螺紋細螺桿T字頭螺絲釘.分類:1275 Mpa(室溫下)/650℃ | (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718). Classification : 1275 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-384-1996 | 航空和航天.耐高溫鎳基合金NI-P100HT(INCONE/718)鍍銀長螺紋細螺桿T字頭螺絲釘.分類:1275 Mpa(室溫下)/650 | (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718), silver plated. Classification : 1275 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-385-1996 | 航空和航天.耐高溫鎳基合金NI-P101HT(WASPALOY)長螺紋細螺桿T字頭螺絲釘.分類:1210 Mpa(室溫下)/730℃ | (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy). Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.) |
| NF L24-386-1996 | 航空和航天.耐高溫鎳基合金NI-P101HT(WASPALOY)鍍銀長螺紋細螺桿T字頭螺絲釘.分類:1210 Mpa(室溫下)/730℃ | (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), silver plated. Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.) |
| NF L24-469-1997 | 航空和航天系列.合金鋼鍍鎘MOS2潤滑深锪孔雙耳鎖緊浮動地腳螺母.等級:900MPa/235℃(歐洲標準EN 2264) | (AEROSPACE SERIES. NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, INCREMENTAL COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2264).) |
| NF L24-472-1996 | 航空和航天系列.帶埋頭孔的固定錨式單耳自鎖鍍鎘合金鋼MOS2潤滑螺母.分類.1100MPa(環境溫度)/235℃ | (AEROSPACE SERIES. NUTS, ANCHOR, SELF-LOCKING, FIXED, SINGLE LUG, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICAITON : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2753).) |
| NF L24-507-1995 | 航空和航天.自鎖鍍隔合金鋼MOS*2制坡面墊平用潤滑六角螺母.等級900MPa/235℃ | (AEROSPACE SERIES. NUTS, HEXAGONAL, SELF-LOCKING, BALL SEAT, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2647).) |
| NF L24-664-1996 | 航空和航天.HI-P101HT耐高熱鎳基合金自鎖十二角螺母.等級:1210Mpa(室溫下)/730℃ | (AEROSPACE SERIES. NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY). CLASSIFICATION: 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3012).) |
| NF L24-665-1996 | 航空航天系列.鍍銀HI-P101HT耐高熱鎳基合金自鎖十二角螺母.分類:1210MPA(室溫下)/730℃ | (AEROSPACE SERIES. NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED. CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3013).) |
| NF L24-666-1996 | 航空航天系列.鍍銀螺紋NI-P101HT耐高熱鎳基合金制自鎖十二角螺母.分類:1210MPA(室溫下)/730℃ | (AEROSPACE SERIES. NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED THREAD. CLASSIFICATION : 1210 MPA (at AMBIENT TEMPERATURE) / 730 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3239).) |
| NF L24-960-1998 | 航空系列.耐熱鎳基合金NI-P100HT(鉻鎳鐵合金718)自鎖緊薄壁MJ螺紋插入物.技術規范 | (Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Technical specification.) |
| NF L24-961-1998 | 航空系列.耐熱鎳基合金NI-P100HT(鉻鎳鐵合金718)鍍銀內短螺紋自鎖緊薄壁插入物 | (Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread. Aerospace series.) |
| NF L24-962-1998 | 航空系列.耐熱鎳基合金NI-P100HT(鉻鎳鐵合金718)鍍銀內長螺紋自鎖緊薄壁插入物 | (Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread. Aerospace series.) |
| NF L24-971-1995 | 航空和航天系列.鍍鎘合金鋼用短螺紋緊公差薄六角頭削角邊螺栓.分類.1100MPa(室溫)/235℃ | (Aerospace series. Bolts, shoudered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated. Classification : 1 100 MPa (at ambient temperature) / 235 degrees celsius.) |
| NF L24-984-1998 | 航空系列.鑲嵌式,螺紋,螺旋型線圈,自鎖耐熱鑷合金NI-PH2801(INCONEL X 750)鍍銀 | (Aerospace series. Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated.) |
| NF L24-986-1998 | 航空系列.鑲嵌式,螺紋,螺旋型線圈,自鎖耐熱鎳基合金NI-PH2801(INCONEL X 750) | (Aerospace series. Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750).) |
| NF L25-110-1979 | 鋁合金合頁 | (ALUMINIUM ALLOY HINGES.) |
| NF L26-301-1995 | 航空航天系列.耐熱鎳基合金NI-P100HT(INCONEL718)用無頭削角邊聯軸節 | (Aerospace series. Pins, shoulder, headless, in heat resisting nickel base alloy ni-P100HT (inconel 718).) |
| NF L26-302-1995 | 航空航天系列.耐熱鎳基合金NI-P100HT(INCONEL718)用平紋定位銷 | (Aerospace series. Dowels, plain, in heat resisting nickel base alloy ni-P100HT (inconel 718).) |
| NF L31-602-1990 | 航空和航天系列.鋁合金圓環.自潤滑油封.尺寸和負載 | (AEROSPACE SERIES. BUSHES,PLAIN ALUMINIUM ALLOY WITH SELF-LUBRICATING LINER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2285).) |
| NF L31-603-1990 | 航空和航天系列.鋁合金凸環.自潤滑油封.尺寸和負載 | (AEROSPACE SERIES. BUSHES,FLANGED ALUMINIUM ALLOY WITH SELF-LUBRICATING LINER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2286).) |
| NF L31-613-1989 | 航空和航天系列.鋁合金制套管 | (AEROSPACE SERIES. COLLARS,ALUMINIUM ALLOY. (EUROPEAN STANDARD EN 2365).) |
| NF L35-111-1978 | 飛行控制和飛機結構用鋁合金連桿.技術規范 | (ALUMINIUM ALLOY ROD BODY FOR FLIGHT CONTROL AND AIRCRAFT STRUCTURE.TECHNICAL SPECIFICATION.) |
| NF L35-112-1976 | 飛行控制和飛機結構用鋁合金連桿 | (ALUMINIUM ALLOY ROD BODY FOR FLIGHT CONTROL AND AIRCRAFT STRUCTURE. DIMENSIONS.) |
| NF L35-120-1996 | 航空航天系列.飛行操縱系統用鋁合金制桿體.技術規范(歐洲標準EN 2289) | (AEROSPACE SERIES. ROD BODIES IN ALUMINIUM ALLOY FOR FLIGHT CONTROLS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2289).) |
| NF L35-121-1998 | 航空航天系列.棒材,可調節末端配件用鋁合金飛行控制.第1部分:尺寸和負載 | (AEROSPACE SERIES. ROD BODIES, FLIGHT CONTROL IN ALUMINIUM ALLOY FOR ADJUSTABLE END FITTINGS. PART 1 : DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2290-1).) |
| NF L35-180-1987 | 航空系列.合金鋼制有徑向齒紋的制動器.尺寸 | (Aerospace series. Washers, lock with radial serrations, in alloy steel. Dimensions.) |
| NF L36-212-1989 | 航空和航天系列.銅鋅合金制拉緊螺桿套筒.尺寸和負載 | (Aerospace series. Turnbarrels, control cable in copper-zinc alloys. Dimensions and loads.) |
| NF L43-360-2002 | 航空航天系列.鈦合金管聯接器8°30'.帶螺紋的管端彎接頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, welded, end, threaded.) |
| NF L43-361-2002 | 航空航天系列. 8°30'鈦合金管連接件.帶動態梁密封端的焊接卡套 | (Aerospace series - Pipe couplings 8 o30' in titanium alloy - Ferrules, welded, with dynamic beam seal end.) |
| NF L43-362-2002 | 航空航天系列. 8°30'鈦合金管連接件.直接頭 | (Aerospace series - Pipe couplings 8 o30' in titanium alloy - Unions, straight.) |
| NF L43-363-2002 | 航空航天系列. 8°30'鈦合金管連接件.直減徑接頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, straight, reducer.) |
| NF L43-364-2002 | 航空航天系列.8°30'鈦合金管聯接件.隔壁直角管接頭 | (Aerospace series - Pipe couplings 8 o30' in titanium alloy - Unions, straight bulkhead.) |
| NF L43-365-2002 | 航空航天系列.8°30'鈦合金管聯接件.隔壁直角彎接頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead, welded end.) |
| NF L43-366-2002 | 航空航天系列.鈦合金管聯接器8°30'.帶密封環的異徑管端接頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Adaptors, reduced pipe end, with lockring.) |
| NF L43-370-2002 | 航空航天系列.8°30'鈦合金管聯接件.90°彎頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o.) |
| NF L43-371-2002 | 航空航天系列.8°30'鈦合金管聯接件.帶推進線螺母的90°彎頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o with thrust wire nut.) |
| NF L43-372-2002 | 航空航天系列.8°30'鈦合金管聯接件.90°彎頭焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o welded end.) |
| NF L43-373-2002 | 航空航天系列.8°30'鈦合金管聯接件.帶推進線螺母的90°彎頭焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o, welded end with thrust wire nut.) |
| NF L43-374-2002 | 航空航天系列.8°30'鈦合金管聯接件.隔離直通90°彎頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o, bulkhead.) |
| NF L43-375-2002 | 航空航天系列.8°30'鈦合金管聯接件.隔離直通90°彎頭焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o, bulkhead, welded end.) |
| NF L43-376-2002 | 航空航天系列. 8°30'鈦合金管聯接件.45°彎頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 45 o.) |
| NF L43-377-2002 | 航空航天系列. 8°30'鈦合金管聯接件.帶推進線螺母的45°焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 45 o welded end with thrust wire nut.) |
| NF L43-378-2002 | 航空航天系列. 8°30'鈦合金管聯接件.隔離直通45°彎頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 45 o, bulkhead.) |
| NF L43-379-2002 | 航空航天系列.8°30'鈦合金管聯接件.三通管 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees.) |
| NF L43-380-2002 | 航空航天系列. 8°30'鈦合金管聯接件.帶推進線螺母的三通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees branch with thrust wire nut.) |
| NF L43-381-2002 | 航空航天系列.8°30'鈦合金管聯接件.端部帶推進線螺母的三通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees with thrust wire nut on run.) |
| NF L43-382-2002 | 航空航天系列.8°30'鈦合金管聯接件.隔直三通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees bulkhead branch.) |
| NF L43-383-2002 | 航空航天系列.8°30'鈦合金管聯接件.端部隔直三通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees bulkhead on run.) |
| NF L43-384-2002 | 航空航天系列.8°30'鈦合金管聯接件.推進線螺母 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Thrust wire nut.) |
| NF L43-385-2002 | 航空航天系列.8°30'鈦合金管聯接件.焊接卡套用螺母 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Nut for welded ferrule.) |
| NF L43-386-2002 | 航空航天系列.8°30'鈦合金管聯接件.隔壁直通螺母 | (Aerospace series - Pipe coupling in titanium alloy - Bulkhead nuts.) |
| NF L43-387-2002 | 航空航天系列.8°30'鈦合金管聯接件.推進線 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Thrust wire.) |
| NF L43-388-2002 | 航空航天系列.8°30'鈦合金管聯接件.帶動態粱密封端的端部焊接減徑的卡套 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end.) |
| NF L43-389-2002 | 航空航天系列.8°30'鈦合金管聯接件.鎖環配件 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Adaptors with lockring.) |
| NF L43-390-2002 | 航空航天系列.8°30'鈦合金管聯接件. 長型隔壁直通接頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead, long.) |
| NF L43-391-2002 | 航空航天系列.8°30'鈦合金管聯接件. 長型隔壁直通接頭焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead, long, welded end.) |
| NF L43-392-2002 | 航空航天系列.8°30'鈦合金管聯接件.減徑三通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees, reduced.) |
| NF L43-393-2002 | 航空航天系列.鈦合金管聯接器8°30'.彎管90度焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o welded ends.) |
| NF L43-394-2002 | 航空航天系列.鈦合金管聯接器8°30'.彎管45度焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 45 o welded ends.) |
| NF L43-395-2002 | 航空航天系列.鈦合金管聯接器8°30'.長期使用的悶頭T形管 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees bulkhead on run long.) |
| NF L43-396-2002 | 航空航天系列.鈦合金管聯接器8°30'.十字T形管接頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, cross.) |
| NF L43-397-2002 | 航空航天系列.鈦合金管聯接器8°30'.90度悶頭長彎管 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o bulkhead, long.) |
| NF L43-398-2002 | 航空航天系列.8°30'鈦合金管聯接件.長焊接端的90°彎頭隔壁直通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Elbows 90 o bulkhead, welded end long.) |
| NF L43-399-2002 | 航空航天系列.8°30'鈦合金管聯接件.長分支隔壁直通三通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees, bulkhead branch long.) |
| NF L43-400-2002 | 航空航天系列.8°30'鈦合金管聯接件.端部帶推進線螺母的減徑三通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees, reduced with thrust wire nut on run.) |
| NF L43-401-2002 | 航空航天系列.8°30'鈦合金管聯接件.Tees, reduced, bulkhead branch, long | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees, reduced, bulkhead branch, long.) |
| NF L43-402-2002 | 航空航天系列.8°30'鈦合金管聯接件.隔壁直通分支減徑三通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees, reduced, bulkhead branch.) |
| NF L43-403-2002 | 航空航天系列.8°30'鈦合金管聯接件.長端頭部隔壁直通分支減徑三通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees, reduced, bulkhead on run, long.) |
| NF L43-404-2002 | 航空航天系列.8°30'鈦合金管聯接件.隔壁直通減徑三通 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Tees, reduced, bulkhead.) |
| NF L43-406-2002 | 航空航天系列.鈦合金管聯接器8°30'.檢修用帶動態梁密封端的焊接金屬包頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Ferrules, welded with dynamic beam seal end, for repair.) |
| NF L43-407-2002 | 航空航天系列.鈦合金管聯接器8°30'.檢修用焊接端部的悶頭管接頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead welded end, for repair.) |
| NF L43-408-2002 | 航空航天系列.鈦合金管聯接器8°30'.檢修用長的焊接端部的悶頭管接頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead long welded end, for repair.) |
| NF L43-409-2002 | 航空航天系列.鈦合金管聯接器8°30'.檢修用焊接端加螺紋的管接頭 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, welded end threaded for repair.) |
| NF L43-613-2003 | 航空航天系列.耐熱鋼或耐熱鎳合金管連接件.焊接連接端.設計構型.英制 | (Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel alloy - Coupling end, welded - Design configuration - Inch series.) |
| NF L43-620-2003 | 航空航天系列.60度鈦合金管接頭.油口接頭 | (Aerospace series - Pipe couplings, 60 o, in titanium alloy - Port connection.) |
| NF L43-621-2003 | 航空航天系列.60度鈦合金TI-P64001球形管接頭.直通轉動螺套 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Swivel nuts, straight.) |
| NF L43-622-2003 | 航空航天系列.鈦合金TI-P64001制球形、60度管聯接器.焊接的螺紋直活管節 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded.) |
| NF L43-623-2003 | 航空航天系列.鈦合金TI-P64001制球形、60度管聯接器.螺紋直活管節 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Straight unions, threaded.) |
| NF L43-624-2003 | 航空航天系列.鈦合金TI-P64001制球形、60度管聯接器.焊接箍 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Ferrules, welded.) |
| NF L43-625-2003 | 航空航天系列.鈦合金TI-P64001制球形、60度管聯接器.管底座 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Caps.) |
| NF L43-626-2003 | 航空航天系列.60度鈦合金TI-P64001球形管接頭.拉力張線用轉動螺套 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Swivel nuts for thrust wire.) |
| NF L43-627-2003 | 航空航天系列.60度鈦合金TI-P64001球形管接頭.焊接的90度彎頭 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Elbows 90 o, welded.) |
| NF L43-628-2003 | 航空航天系列.60度鈦合金TI-P64001球形管接頭.鋼FE-PA13制拉力張線 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Thrust wires in steel FE-PA13.) |
| NF L46-240-2002 | 航空航天系列.在鋁合金中帶橡膠墊的固定和移動式支架夾具.尺寸和重量 | (Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions, masses.) |
| NF L46-331-2002 | 航空航天系列.8°30'鈦合金管接頭.壓合栓 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Pressure plugs.) |
| NF L46-332-2002 | 航空航天系列.鈦合金 8°30'管接頭.帶動態梁密封端的單頭卡套 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Ferrules, blind, with dynamic beam seal end.) |
| NF L46-333-2002 | 航空航天系列.8°30'鈦合金管連接件.帶鎖緊環的截止管 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Blanking plugs with lockring.) |
| NF L46-341-2002 | 航空航天系列.鈦合金直通墊圈 | (Aerospace series - Washers, bulkhead in titanium alloy.) |
| NF L46-342-2002 | 航空航天系列.焊接管用鈦合金三通墊環 | (Aerospace series - T-ring fillers in titanium alloy for welding pipes - 14 000 kPa nominal pressure.) |
| NF L46-343-2002 | 航空航天系列.焊接管用鈦合金三通墊環.28 000 kPa大氣壓 | (Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28 000 kPa nominal pressure.) |
| NF L46-614-2003 | 航空航天系列.合金鋼FE-PA3903制彈簧張力夾 | (Aerospace series - Clips, spring tension, in alloy steel FE-PA3903.) |
| NF L52-230-2001 | 航空航天系列.電纜用銅或銅合金導體.產品標準 | (Aerospace series - Copper or copper alloy conductors for electrical cables - Product standard.) |
| NF M64-100-1992 | 原子反應堆機械設備.設計與制造規則.原子反應堆機械設備用鈷合金熔化法的表面硬化 | (MECHANICAL EQUIPMENT OF NUCLEAR REACTORS : DESIGN AND CONSTRUCTION RULES. HARD FACING BY COBALT ALLOYS MELTING FOR MECHANICAL EQUIPMENT OF NUCLEAR REACTORS.) |
| NF M87-228-2003 | 石油和天然氣工業.鋁合金鉆桿 | (Petroleum and natural gas industries - Aluminium alloy drill pipes.) |
| NF M87-240-2002 | 石油和天然氣工業.作外殼、管道和連接材料用的耐腐蝕合金無縫管.交貨技術條件 | (Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions.) |
| NF P22-202-1-1993 | DTU 32-2.建筑工程.金屬結構件.鋁合金框架.第1部分:技術規范 | (DTU 32-2 - Building works - Metal construction - Aluminium alloys framework - Part 1 : technical specifications.) |
| NF P22-202-1/A1-2000 | DTU 32.2 建筑工程.金屬構架.鋁合金框架.第1部分:技術規范 | (DTU 32.2 - Building works - Metal construction - Aluminium alloys framework - Part 1 : technical specifications.) |
| NF P22-202-2-1993 | DTU 32-2. 建筑工程.私人合同.金屬結構.鋁合金制門窗框.第2部分:特殊條款 | (DTU 32-2. BUILDING WORKS. PRIVATE CONTRACTS. METAL CONSTRUCTION. ALUMINIUM ALLOYS FRAMEWORK. PART 2 : SPECIAL CLAUSES.) |
| NF P26-309-1958 | 五金.稱作第一熔化的鋁合金重力模制五金用品 | (HARDWARE. GRAVITY CAST ALUMINIUM ALLOY HARDWARE.) |
| NF P34-411-1983 | 屋頂.加筋或不加筋鋁合金波形板 | (Roofing materials. Corrugated or ribbed aluminium alloy plates.) |
| NF P34-504-1983 | 屋頂.鋁合金加筋板.靜力和動力試驗 | (ROOF COVERING. ALUMINIUM ALLOY RIBBED SHEETS. STATIC AND DYNAMIC BEND TESTS.) |
| NF P34-631-1983 | 屋頂.鋁或鋁合金制線狀型材 | (ROOF COVERING. ALUMINIUM OR ALUMINIUM-ALLOY SHAPED LINEAR ELEMENTS.) |
| NF P43-000-2003 | 建筑物閥門.建筑物中飲用水供應用銅合金節流閥.試驗要求.國家標準補充 | (Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements - National complement.) |
| NF P43-001-2000 | 建筑物用閥門.建筑物中供應引用水用銅合金截止閥.試驗和要求 | (Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements.) |
| NF R93-903-1978 | 輕合金用六角空心螺紋塞 | (HEXAGONAL HOLLOW SCREW-PLUGS FOR USE ON LIGHT ALLOYS.) |
| NF S80-771-1973 | 鐘表業.手表殼和鐘表零件合金鍍層的一般特性 | (Horology. General requirements for gold alloy coverings on watch cases and horological components.) |
| NF S86-610-1996 | 鐘表業.非鐵合金鍍鉻表鑒定 | (Horology. Verification of chromium plated watch cases made in non ferrous alloys.) |
| NF S90-427-1990 | 外科醫療器械.脊椎用接骨器材.不銹鋼制或鈷基合金制脊椎板.A系統.尺寸與幾何形狀 | (MEDICO-SURGICAL EQUIPMENT. OSTEOSYNTHESIS EQUIPMENT FOR THE RACHIS. FORGED STAINLESS STELL OR COBALT ALLOY RACHIS PLATES. SYSTEM A. DIMENSIONS AND GEOMETRY.) |
| NF S91-109-1999 | 牙科用旋轉器械.牙鉆.第1部分:鋼制牙鉆和硬質合金牙鉆 | (Dental rotary instruments. Burs. Part 1 : steel and carbide burs.) |
| NF S91-116-4-2003 | 牙科用旋轉器械.切割刀具.第4部分:實驗室用小型硬質合金刀具 | (Dental rotary instruments - Cutters - Part 4 : miniature carbide laboratory cutters.) |
| NF S91-117-2001 | 牙科旋轉器械.切割器.第2部分:實驗室用硬質合金切割器 | (Dental rotary instruments - Cutters - Part 2 : carbide laboratory cutters.) |
| NF S91-130-1994 | 牙科用旋轉器械.切割工具.第3部分:銑床用硬質合金實驗室刀具 | (Dental rotary instruments. Cutters. Part 3 : carbide laboratory cutters for milling machines.) |
| NF S91-141-1997 | 牙齒植入物.牙科用合金的生物相容性.電化學試驗的標準化 | (biodegradability of dental metal alloys. Standardization of electrochemical tests.) |
| NF S91-201-2002 | 牙科材料.牙用汞齊合金 | (Dental materials - Alloys for dental amalgam.) |
| NF S91-204-1995 | 牙科金合金鑄件 | (Dental casting gold alloys.) |
| NF S91-218-2000 | 鑄牙用貴金屬含量介于25%-75%之間的合金 | (Dental casting alloys with noble metal content of at least 25 % but less than 75 %.) |
| NF S91-222-1-1997 | 牙科基本金屬鑄造合金.第1部分:鈷基合金(歐洲標準EN ISO 6871-1) | (Dental base metal casting alloys. Part 1 : cobalt-based alloys.) |
| NF S91-222-2-1997 | 牙科基本金屬鑄造合金.第2部分:鎳基合金(歐洲標準EN ISO 6871-2) | (Dental base metal casting alloys. Part 2 : nickel-based alloys.) |
| NF S91-249-1997 | 牙科陶瓷熔凝的金屬修復合金 | (DENTAL CERAMIC FUSED TO METAL RESTORATIVE ALLOYS.) |
| NF S91-310-1997 | 牙科設備.汞、合金混合器和分配器(歐洲標準EN ISO 8282) | (DENTAL EQUIPMENT. MERCURY AND ALLOY MIXERS AND DISPENSERS. (EUROPEAN STANDARD EN ISO 8282).) |
| NF S91-312-2003 | 牙科學.汞齊合金膠囊 | (Dentistry - Dental amalgam capsules.) |
| NF S94-053-1997 | 外科植入物.金屬材料.第12部分:鍛造鈷/鉻/鉬合金 | (Implants for surgery. Metallic materials. Part 12 : wrought cobalt-chromium-molybdenum alloy.) |
| NF S94-054-1997 | 外科植入物.金屬材料.第4部分:鈷鉻鉬鑄造合金 | (Implants for surgery. Metallic materials. Part 4 : cobalt-chromium-molybdenum casting alloy.) |
| NF S94-055-1997 | 外科用植入物.金屬材料.第5部分:鍛制鈷-鉻-鎢-鎳合金 | (Implants for surgery. Metallic materials. Part 5 : wrought cobalt-chromium-tungsten-nickel alloy.) |
| NF S94-056-1998 | 外科植入物.金屬材料.第6部分:鍛壓的鈷鎳鉻鉬合金 | (Implants for surgery. Metallic materials. Part 6 : wrought cobalt-nickel-chromium-molybdenum alloy.) |
| NF S94-057-1997 | 外科植入物.金屬材料.可鍛和冷成型鈷鉻鎳鉬鐵合金 | (Implants for surgery. Metallic materials. Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy.) |
| NF S94-058-1998 | 外科植入物.金屬材料.第8部分:鍛壓的鈷鎳鉻鉬鎢鐵合金 | (Implants for surgery. Metallic materials. Part 8 : wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy.) |
| NF S94-080-1-1997 | 外科植入物.鈦合金TI 6 AI 4V.第1部分:棒材和桿材 | (Surgical implants. Titanium alloy Ti 6 AI 4V. Part 1 : bars and rods.) |
| NF S94-080-2-1997 | 外科植入物.鈦合金TI 6 AI 4V.第2部分:薄板、帶材和板材 | (Surgical implants. Titanium alloy Ti 6 AI 4V. Part 2 : sheets, strips and plates.) |
| NF S94-080-3-1997 | 外科植入物.鈦合金TI 6 AI 4V.第3部分:類似鑄造半成品 | (Surgical implants. Titanium alloy Ti 6 AI 4V. Part 3 : semi-finished products obtained by casting.) |
| NF S94-080-4-1997 | 外科植入物.鈦合金TI 6 AI 4V.第4部分:由鍛造或切削加工而得的半成品 | (Surgical implants. Titanium alloy Ti 6 AI 4V. Part 4 : semi-finished products obtained by forging or by machining.) |
| NF S99-515-2001 | 醫療器械的生物評定.第15部分:對從金屬和合金中降解的產品的識別和合格檢驗 | (Biological evaluation of medical devices - Part 15 : identification and quantification of degradation products from metals and alloys.) |
| NF T34-750-1-2003 | 涂料和清漆.建筑用鋁及鋁合金涂層.第1部分:粉末涂覆材料制涂層 | (Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1 : coatings prepared from powder coating materials.) |
| NF T60-186-1993 | 水合金屬工作流體.與黑色金屬接觸時防繡特性的測定 | (AQUEOUS METAL WORKING FLUIDS. EVALUATION OF RUST PREVENTION PROPERTIES ON CONTACT WITH FERROUS METALS.) |
| NF T60-197-1993 | 水合及非水合金屬工作流體.長期及短期耐儲存性 | (AQUEOUS AND NON AQUEOUS METAL WORKING FLUIDS. SHORT AND LONG TERM STORAGE STABILITY.) |
| P22-202-1993 | DTU 31-2.建筑工程.金屬建筑.鋁合金框架.第1部分:技術規范.第2部分:特別條款 | (DTU 32-2. Building works. Metal construction. Aluminium alloys framework. Part 1 : technical specifications - Part 2 : special clauses.) |
| 編號 | 中文名稱 | 英文名稱 |