| 編號 | 中文名稱 | 英文名稱 |
|---|
| ANSI/ASTM A753-1997
| 鎳鐵軟磁合金規范
| Specification for Nickel-Iron Soft Magnetic Alloys
|
| ANSI/ASTM B407-1996
| 鎳鐵鉻合金無縫管規范
| Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
|
| ANSI/ASTM B408-1996
| 鎳鐵鉻合金桿材和棒材規范
| Specification for Nickel-Iron-Chromium Alloy Rod and Bar
|
| ANSI/ASTM B409-1996
| 鎳鐵鉻合金板材、薄板材和帶材規范
| Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
|
| ANSI/ASTM B423-1999
| 鎳鐵鉻鉬銅合金(UNS N08825 and UNS N08221)無縫管規范
| Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and UNS N08221) Seamless Pipe and Tube
|
| ANSI/ASTM B424-1998
| 鎳鐵鉻鉬銅合金(UNS N08825 and N08221)板、薄板及帶材規范
| Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and N08221) Plate, Sheet, and Strip
|
| ANSI/ASTM B425-1999
| 鎳鐵鉻鉬銅合金(UNS N08825 and UNS N08221)桿材和棒材規范
| Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and N08221) Rod and Bar
|
| ANSI/ASTM B514-1996
| 鎳鐵鉻合金焊管規范
| Specification for Welded Nickel-Iron-Chromium Alloy Pipe
|
| ANSI/ASTM B535-1999
| 鎳鐵鉻硅合金(UNS N08330 and UNS N08332)無縫管規范
| Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and UNS N08332) Seamless Pipe
|
| ANSI/ASTM B536-1996
| 鎳鐵鉻硅合金板材、薄板材及帶材規范
| Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip
|
| ANSI/ASTM B546-1998
| 電熔焊接鎳鉻鈳鉬合金(UNS N06617)、鎳鐵鉻硅合金(UNS N08330 and UNS N08332)、 鎳鉻鐵合金(UNS N06025)和
| Specification for Electric-Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
|
| ANSI/ASTM B621-1996
| 鎳鐵鉻鉬合金(UNS N08320)棒材規范
| Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
|
| ANSI/ASTM B649-1996
| 鎳鐵鉻鉬銅低碳合金(UNS N08904)、鎳鐵鉻鉬銅氮低碳合金(UNS N08925,UNS N08031和UNS N08926)和鉻鎳鐵氮低
| Specification for Ni-Fe-Cr-Mo-Cu Low-Carbon Alloy (UNS N08904) and Ni-Fe-Cr-Mo-Cu-N Low Carbon Alloys (UNS 08925, UNS N08031, and UNS N08925) Cr-Ni-Fe-N Low Carbon (UNS R20033)
|
| ANSI/ASTM B672-1996
| 穩定的鎳鐵鉻鉬鈮合金棒材及線材規范
| Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
|
| ANSI/ASTM B690-1996
| 鐵鎳鉻鉬合金(UNS N08366 and UNS No8367)無縫管規范
| Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS No8367) Seamless Pipe and Tube
|
| ANSI/ASTM B691-1996
| 鐵鎳鉻鉬合金(UNS N08366 And UNS N08367)條材、棒材及線材規范
| Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 And UNS N08367) Rod, Bar, and Wire
|
| ANSI/ASTM B709-1998
| 鐵鎳鉻鉬合金(UNS No8028)板材、薄板和帶材
| Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS No8028) Plate, Sheet, and Strip
|
| ANSI/ASTM B710-1999
| 鎳鐵鉻硅合金焊接管規范
| Specification for Nickel-Iron-Chromium Silicon-Alloy Welded Pipe
|
| ANSI/ASTM B78-2001
| 鐵鎳鋁合金電加熱加速壽命試驗方法
| Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
|
| ANSI/ASTM B834-1996
| 壓力強化粉末冶金鐵鎳鉻鉬和鎳鉻鉬鈳(Nb)合金管法蘭、管配件、閥門和零件規范
| Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves and Parts
|
| ANSI/ASTM B872-1996
| 沉淀硬化鎳鐵鉻鈷(Nb)鈦鋁合金(UNS N09908)板、薄板及帶材規范
| Specification for Precipitation-Hardening Nickel-Iron-Chromium-Columbium (NB)-Titanium-Aluminum Alloy (UNS NO9908) Plate, Sheet and Strip
|
| ASTM A 753-2002
| 煅制鎳鐵軟磁合金標準規范
| Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
|
| ASTM B 407-2004
| 鎳鐵鉻合金無縫管的標準規范
| Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
|
| ASTM B 408-1996
| 鎳鐵鉻合金桿材棒材標準規范
| Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar
|
| ASTM B 409-2001
| 鎳鐵鉻合金板、薄板和帶材標準規范
| Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
|
| ASTM B 423-2005
| 鎳鐵鉻鉬銅合金無縫管道標準規范(UNS N08825 and N08221)
| Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube
|
| ASTM B 424-2005
| 鎳鐵鉻鉬銅合金(UNS N08825和UNS N08221)板材、薄板及帶材的標準規范
| Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip
|
| ASTM B 425-1999
| 鎳鐵鉻鉬銅合金(UNS N08825和UNS N08221)桿材和棒材標準規范
| Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar
|
| ASTM B 511-2001
| 鎳鐵鉻硅合金棒和型材標準規范
| Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
|
| ASTM B 514-2005
| 焊接的鎳鐵鉻合金管標準規范
| Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe
|
| ASTM B 535-2004
| 鎳鐵鉻硅合金無縫管標準規范
| Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube
|
| ASTM B 536-1995
| 鎳鐵鉻硅合金板、薄板及帶材標準規范
| Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip
|
| ASTM B 546-2004
| 電熔焊接鎳鉻鈷鉬合金(UNS N06617)、鎳鐵鉻硅合金(UNS N08330和UNS N08332)、鎳鉻鐵鋁合金(UNS N06603)、鎳
| Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
|
| ASTM B 591-2004
| 銅鋅錫和銅鋅錫鐵鎳合金板、薄板、帶材及軋制的棒材標準規范
| Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
|
| ASTM B 599-1992
| 鎳鐵鉻鉬鈳穩定合金板、薄板及帶材標準規范
| Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip
|
| ASTM B 620-2003
| 鎳鐵鉻鉬合金板、薄板及帶材標準規范
| Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip
|
| ASTM B 621-2002
| 鎳鐵鉻鉬合金棒材標準規范
| Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
|
| ASTM B 672-2002
| 鎳鐵鉻鉬鈮穩定合金(UNS N08700)棒材及線材的標準規范
| Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
|
| ASTM B 690-2002
| 鐵鎳鉻鉬合金無縫管標準規范
| Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube
|
| ASTM B 691-2002
| 鐵鎳鉻鉬合金桿材、棒材及線材標準規范
| Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire
|
| ASTM B 709-2004
| 鐵鎳鉻鉬合金板、薄板和帶材標準規范
| Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028)* Plate, Sheet, and Strip
|
| ASTM B 710-2004
| 鎳鐵鉻硅合金焊接管標準規范
| Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe
|
| ASTM B 834-1995
| 壓力強化粉末冶金鐵鎳鉻鉬和鎳鉻鉬鈳(Nb)合金管法蘭、管配件、閥門和零件標準規范
| Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts
|
| ASTM B 872-1996
| 沉淀硬化鎳鐵鉻鈷(Nb)鈦鋁合金(UNS N09908)板、薄板及帶材的標準規范
| Standard Specification for Precipitation-Hardening Nickel-Iron-Chromium- Columbium (Nb)-Titanium-Aluminum Alloy (UNS N09908) Plate, Sheet, and Strip
|
| ASTM E 1033-1998
| 在居里溫度以上的F型連續焊接亞錳鐵管的電磁(渦流)檢驗
| Standard Practice for Electromagnetic (Eddy-Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature
|
| ASTM E 1312-1999
| 居里溫度以上鐵磁圓柱棒產品的電磁(渦流)檢驗
| Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature
|
| ASTM E 1917-2002
| 用雙氧釩磷鉬酸鹽分子吸收光譜測定法測定鎳、鎳鐵和鎳合金中磷含量的標準試驗方法
| Standard Test Method for Determination of Phosphorous in Nickel, Ferronickel, and Nickel Alloys by the Phosphovanadomolybdate Molecular Absorption Spectrometric Method
|
| ASTM E 353-1993
| 不銹鋼、耐熱鋼、馬氏體鋼和其它類似的鉻鎳鐵合金化學分析的標準試驗方法
| Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
|
| ASTM E 963-1995
| 用鹽酸甲烷電解質從鎳和鎳鐵積超熱合金中進行相位的電解提取
| Standard Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte
|
| ASTM F 1466-1999
| 金屬與陶瓷密封用鐵鎳鈷合金的標準規范
| Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications
|
| ASTM F 30-1996
| 鐵鎳密封合金標準規范
| Standard Specification for Iron-Nickel Sealing Alloys
|
| ASTM G 61-1986
| 鐵鎳鈷基合金的局部腐蝕敏感性的循環動電勢極化強度的試驗方法
| Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
|
| BS 2857-1976
| 鎳鐵制變壓器與扼流圈疊片規范
| Specification for nickel-iron transformer and choke laminations
|
| BS 6783-1-1986
| 鎳、鎳鐵和鎳合金的取樣與分析.第1部分:采用火焰原子吸收光譜法對鎳中銀、鉍、鎘、鈷、銅、鐵、錳、鉛和鋅
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of silver, bismuth, cadmium, cobalt, copper , iron, manganese, lead and zinc in nickel by flame atomic absorption spectrometry
|
| BS 6783-10-1990
| 鎳、鎳鐵和鎳合金的取樣與分析.第10部分:鎳合金中鐵含量的測定方法(重鉻酸鉀滴定法)
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of iron in nickel alloys (titrimetric method using potassium dichromate)
|
| BS 6783-11-1990
| 鎳、鎳鐵和鎳合金的取樣與分析.第11部分:鎳合金鈷含量的測定方法(六氰基高鐵酸鈉電位滴定法)
| Sampling and analysis of nickel, ferronickel and nickel alloys. Method for the determination of cobalt in nickel alloys (potentiometric titration method using potassium hexacyanoferrate (III))
|
| BS 6783-12-1992
| 鎳、鎳鐵和鎳合金的取樣與分析.第12部分:利用鉬藍分子吸收光譜測定法測定鎳合金中磷的方法
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for the determination of phosphorus in nickel alloys by molybdenum blue molecular absorption spectrometry
|
| BS 6783-13-1992
| 鎳、鎳鐵和鎳合金的取樣與分析.第13部分:用磷釩鉬分子吸收光譜法對鎳、鎳鐵和鎳合金中磷的測定方法
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for the determination of phosphorus in nickel, ferronickel and nickel alloys by phosphovanadomolybdate molecular absorption spectrometry
|
| BS 6783-14-1994
| 鎳、鎳鐵和鎳合金取樣和分析.采用姜黃分子吸收光譜法對鎳和鎳合金中硼總含量的測定方法.
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for the determination of total boron content of nickel, and nickel alloys by curcumin molecular absorption spectrometry
|
| BS 6783-15-1994
| 鎳.鎳鐵和鎳合金的取樣和分析.采用二安替比林基低甲烷分子吸收光譜法對鎳合金中的鈦合金含量的測定方法
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for the determination of titanium in nickel alloys by diantipyrylmethane molecular absorption spectrometry
|
| BS 6783-2-1986
| 鎳、鎳鐵和鎳的合金取樣與分析.第2部分:鎳鐵中鎳的測定方法(丁二酮酚重力分析法)
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of nickel in ferronickel (dimethylglyoxime gravimetric method)
|
| BS 6783-3-1986
| 鎳、鎳鐵和鎳合金的取樣與分析.第3部分:采用火焰原子吸收光譜法鎳鐵中鈷的測定方法
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of cobalt in ferronickel by flame atomic absorption spectrometry
|
| BS 6783-4-1986
| 鎳、鎳鐵和鎳合金的取樣與分析.第4部分:用電熱原子吸收光譜測定法測定銀、砷、鉍、鎘、鉛、銻、硒、錫、碲
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of silver, arsenic, bismuth, cadmium, lead, antimony, selenium, tin, tellurium and thallium in nickel by electrothermal atomic absorption spectrometry
|
| BS 6783-5-1986
| 鎳、鎳鐵和鎳合金的取樣與分析.第5部分:感應電爐燃燒后用紅外吸收法測定鎳、鎳鐵和鎳合金中碳的方法
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of carbon in nickel, ferronickel and nickel alloys by infra-red absorption after induction furnace combustion
|
| BS 6783-6-1986
| 鎳、鎳鐵和鎳合金的取樣與分析.第6部分:硫化氫產生后用甲藍分子吸收光譜測定法測定鎳中硫的方法
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of sulphur in nickel by methylene blue molecular absorption spectrometry after generation of hydrogen sulphide
|
| BS 6783-7-1986
| 鎳、鎳鐵和鎳合金的取樣與分析.第7部分:感應電爐燃燒后用紅外測定鎳鎳鐵和鎳合金中硫的方法
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of sulphur in nickel, ferronickel and nickel alloys by infra-red absorption after induction furnace combustion
|
| BS 6783-8-1986
| 鎳、鎳鐵和鎳合金的取樣與分析.第8部分:感應電爐燃燒后用碘滴定法測定鎳、鎳鐵和鎳合金中硫的方法
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of sulphur in nickel, ferronickel and nickel alloys by iodimetric titration after induction furnace combustion
|
| BS 6783-9-1986
| 鎳、鎳鐵和鎳合金的取樣與分析.第9部分:鎳鐵中硅的測定方法(重力分析法)
| Sampling and analysis of nickel, ferronickel and nickel alloys - Method for determination of silicon in ferronickel (gravimetric method)
|
| BS EN 2583-1997
| 耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)MJ螺紋螺栓.等級:1275MPa(室溫)/650℃.技術規范
| Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 °C - Technical specification
|
| BS EN 26501-1992
| 鐵鎳合金.規范和交貨要求
| Ferronickel - Specification and delivery requirements |
| BS EN 28049-1992
| 鎳鐵彈丸.抽樣分析
| Ferronickel shot - Sampling for analysis
|
| BS EN 28050-1992
| 鎳鐵塊或片.抽樣分析
| Ferronickel ingots or pieces - Sampling for analysis
|
| BS EN 2927-1996
| NI-P100HT(鉻鎳鐵合金 718)耐熱鎳基合金長螺紋減荷螺桿雙六角頭螺栓.等級:1275MPa(室溫)/650℃
| Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification:1275 MPa (at ambient temperature)/650 °C
|
| BS EN 2928-1996
| 鍍銀的NI-P100HT(鉻鎳鐵合金 718)耐熱鎳基合金長螺紋減荷螺桿的雙六角頭螺栓.等級:1275MPa(室溫)/650℃
| Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 °C
|
| BS EN 2933-1996
| NI-P100HT(鉻鎳鐵合金 718)耐熱鎳基合金長螺紋減荷螺桿的T型頭螺栓.等級:1275MPa(室溫)/650℃
| Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification:1275 MPa (at ambient temperature)/650 °C
|
| BS EN 2934-1996
| 鍍銀的NI-P100HT(鉻鎳鐵合金 718)耐熱鎳基合金長螺紋減荷螺桿的T型頭螺栓.等級:1275MPa(室溫)/650℃
| Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification:1275 MPa (at ambient temperature)/650 °C
|
| BS EN 3008-1998
| 耐熱鎳基合金NI-P100HT(鉻鎳鐵合金718)制薄柄長螺紋六角頭螺栓.等級:1275 MPa(室溫)/650℃
| Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification:1275 MPa (at ambient temperature)/650 °C
|
| BS EN 3009-1998
| 鍍銀耐熱鎳基合金NI-P100HT(鉻鎳鐵合金718)制薄柄長螺紋六角頭螺栓.等級:1275 MPa(室溫)/650℃
| Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification - 1275 MPa (at ambient temperature)/650 °C
|
| BS EN 3297-1998
| 薄壁、自鎖緊、耐熱鎳基合金NI-P100HT(鉻鎳鐵合金718)、MJ螺紋嵌鑲件.技術規范
| Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Technical specification
|
| BS EN 3832-2005
| 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制長螺紋、細桿、十二角螺栓.等級:1550MPa(室溫)/650℃
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature) / 650 °C
|
| BS EN 3833-2005
| 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制MJ螺紋螺栓.等級:1550MPa(室溫)/650℃.技術規范
| Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1550 MPa (at ambient temperature) / 650 °C - Technical specification
|
| BS EN 4009-2005
| 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制中長螺紋、緊公差柄、十二角頭螺栓.等級:1550MPa(室
| Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature)
|
| BS EN 4011-2005
| 航空航天系列.十二角頭自鎖緊的鍍銀耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)螺母.等級:1550MPa(室溫)/600 鳦
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature)/600 °C
|
| BS EN 4012-2004
| 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制MoS2涂覆的自鎖緊雙六角頭螺母.等級:1550MPa(室溫)/4
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification - 1 550 MPa (at ambient temperature) / 425 °C
|
| BS EN 4013-2005
| 航空航天系列.自鎖緊鍍銀耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制帶柄螺母.等級:1550MPa(室溫)/600 鳦
| Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature) / 600 °C
|
| BS EN 4047-2004
| 航空航天系列.自鎖緊MJ螺紋鍍銀耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)螺母.等級:1550MPa(室溫)/600 鳦.技術
| Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550MPa (at ambient temperature)/600 °C - Technical specification
|
| BS EN 4048-2004
| 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制MoS2涂覆的自鎖、帶MJ螺紋的螺母.等級:1550MPa(室溫)
| Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification - 1 550 MPa (at ambient temperature) / 425 °C - Technical specification
|
| BS EN 4117-2004
| 航空航天系列.十二角頭自鎖緊螺紋鍍銀的耐熱鎳基合金NI-PH 2601(鉻鎳鐵合金718)螺母.等級:1550MPa(室溫)/60
| Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification - 1 550 MPa (at ambient temperature) / 600 °C
|
| BS EN 4123-2004
| 航空航天系列.自鎖緊螺紋鍍銀的耐熱鎳基合金NI-PH 2601(鉻鎳鐵合金718)帶柄螺母.等級:1550MPa(室溫)/600 鳦
| Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification - 1 550 MPa (at ambient temperature) / 600 °C
|
| BS EN 4321-2004
| 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金 718)制的帶安全鎖線孔、細桿、長螺紋、鍍銀的雙六角頭螺栓
| Aerospace series - Bolts, double hexagon head with lockwire holes , relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification - 1 550 Mpa (at ambient temperature)/650 °C
|
| BS EN 4352-2004
| 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金 718)制帶安全鎖線孔、細桿、長螺紋、鍍MoS2 的雙六角頭螺
| Aerospace series - Bolts, double hexagon head with lockwire holes , relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification - 1 550 MPa (at ambient temperature) / 425 °C
|
| BS ISO 11438-1-1994
| 鎳鐵合金.采用電熱原子吸收光譜測定法對微量元素含量的測定.第1部分:一般要求和試樣溶解
| Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - General requirements and sample dissolution
|
| BS ISO 11438-2-1994
| 鎳鐵合金.采用電熱原子吸收光譜測定法對微量元素含量的測定.第2部分: 鉛含量測定
| Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of lead content
|
| BS ISO 11438-3-1994
| 鎳鐵合金.采用電熱原子吸收光譜測定法對微量元素含量的測定.第3部分: 銻含量測定
| Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of antimony content
|
| BS ISO 11438-4-1994
| 鎳鐵合金.采用電熱原子吸收光譜測定法對微量元素含量的測定.第4部分: 錫含量測定
| Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of tin content
|
| BS ISO 11438-5-1994
| 鎳鐵合金.采用電熱原子吸收光譜測定法對微量元素含量的測定.第5部分:碲含量測定
| Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of tellurium content
|
| BS ISO 11438-6-1994
| 鎳鐵合金.采用電熱原子吸收光譜測定法對微量元素含量的測定.第6部分:鉈含量測定
| Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of thallium content
|
| BS ISO 11438-7-1994
| 鎳鐵合金.采用電熱原子吸收光譜測定法對微量元素含量的測定.第7部分:銀含量測定
| Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of silver content
|
| BS ISO 11438-8-1994
| 鎳鐵合金.采用電熱原子吸收光譜測定法對微量元素含量的測定.銦含量的測定
| Ferronickel - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of indium content
|
| DIN 17745-2002
| 鎳鐵精制合金.化學成分
| Wrought alloys of nickel and iron - Chemical composition
|
| DIN EN 26352-1992
| 鎳鐵.鎳含量的測定.丁二酮肟重量分析法(ISO 6352-85)
| Ferronickel; determination of nickel content; dimethylglyoxime gravimetric method (ISO 6352:1985); german version EN 26352:1991
|
| DIN EN 26501-1992
| 鎳鐵.規范和交付要求
| Ferronickel; specification and delivery requirements (ISO 6501:1988); german version EN 26501:1992
|
| DIN EN 27520-1992
| 鎳鐵.鈷含量的測定.火焰原子吸收光譜測定法(ISO 7520-85)
| Ferronickel; determination of cobalt content; flame atomic absorption spectrometric method (ISO 7520:1985); german version EN 27520:1991
|
| DIN EN 27526-1992
| 鎳.鎳鐵.鎳合金.硫含量的測定.感應電爐燃燒后紅外線吸收法(ISO 7526-1985)
| Nickel, ferronickel and nickel alloys; determination of sulfur content; infra-red absorption method after induction furnace combustion (ISO 7526:1985); german version EN 27526:1991
|
| DIN EN 27527-1992
| 鎳.鎳鐵.鎳合金.硫含量的測定.感應電爐燃燒后碘滴定分析法(ISO 7527-1985)
| Nickel, ferronickel and nickel alloys; determination of sulfur content; iodimetric titration method after induction furnace combustion (ISO 7527:1985); german version EN 27527:1991
|
| DIN EN 28049-1992
| 鎳鐵細粒.分析取樣
| Ferronickel shot; sampling for analysis (ISO 8049:1988); german version EN 28049:1992
|
| DIN EN 28050-1992
| 鎳鐵錠和鎳鐵塊.分析取樣
| Ferronickel ingots or pieces; sampling for analysis (ISO 8050:1988); german version EN 28050:1992
|
| DIN EN 28343-1992
| 鎳鐵.硅含量的測定.重量分析法(ISO 8343-1985)
| Ferronickel; determination of silicon content; gravimetric method (ISO 8343:1985); german version EN 28343:1991
|
| DIN EN 3832-2005
| 航空航天系列.耐熱鎳基合金NI-P100HT(鉻鎳鐵合金718)制長螺紋細桿雙六角頭螺栓.等級:1550MPa(室溫)/650℃
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 3832:2004
|
| DIN EN 3833-2005
| 航空航天系列.鈍化的耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制MJ螺紋螺栓.等級:1550MPa(室溫)/650℃.技術規
| Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated - Classification: 1550 MPa (at ambient temperature)/ 650 °C - Technical specification; German and English version EN 3833:2004
|
| DIN EN 4009-2006
| 航空航天系列.耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制帶安全鎖線孔、減徑柄、長螺紋的雙六角頭螺栓.等級:1
| Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 4009:2004
|
| DIN EN 4321-2006
| 航空航天系列.鍍銀耐熱鎳基合金NI-PH2601(鉻鎳鐵合金718)制帶安全鎖線孔、減徑柄、長螺紋的雙六角頭螺栓.等
| Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature)/650 °C; German and English version EN 4321:2004
|
| DIN EN 4352-2006
| 航空航天系列.鍍MoS2的耐熱鎳基合金NI-PH2601(鉻鎳鐵合金 718)制帶安全鎖線孔、減徑柄、長螺紋的雙六角頭螺
| Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS<(Index)2> coated - Classification: 1550 MPa (at ambient temperature) /425 °C; German and English version EN 4352:2004
|
| EN 2583-1997
| 航空航天系列 NI-PH2601(鉻鎳鐵合金718)耐熱鎳基合金MJ螺紋螺栓 等級：1275MPa( 環境溫度)/650℃ 技術規
| Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650℃ - Technical specification
|
| EN 26352-1991
| 鎳鐵 鎳含量的測定 丁二酮肟重量分析法
| Ferronickel; determination of nickel content; dimethylglyoxime gravimetric method (ISO 6352:1985)
|
| EN 26501-1992
| 鎳鐵 交貨要求的規范
| Ferronickel; specification and delivery requirements (ISO 6501:1988)
|
| EN 27520-1991
| 鎳鐵 鈷含量的測定 火焰原子吸收光譜測定法
| Ferronickel; determination of cobalt content; flame atomic absorption spectrometric method (ISO 7520:1985)
|
| EN 27526-1991
| 鎳、鎳鐵和鎳合金 硫含量的測定 感應電爐燃燒后紅外線吸收法
| Nickel, ferronickel and nickel alloys; determination of sulfur content; infra-red absorption method after induction furnace combustion (ISO 7526:1985)
|
| EN 27527-1991
| 鎳、鎳鐵和鎳合金 硫含量的測定 感應電爐燃燒后碘量滴定法
| Nickel, ferronickel and nickel alloys; determination of sulfur content; iodometric titration method after induction furnace combustion (ISO 7527:1985)
|
| EN 28049-1992
| 鎳鐵丸 分析取樣
| Ferronickel shot; sampling for analysis (ISO 8049:1988)
|
| EN 28050-1992
| 鎳鐵合金錠或塊 分析取樣
| Ferronickel ingots or pieces; sampling for analysis (ISO 8050:1988)
|
| EN 28343-1991
| 鎳鐵 硅含量的測定 重量法
| Ferronickel; determination of silicon content; gravimetric method (ISO 8343:1985)
|
| EN 2934-1996
| 航空航天系列 合金NI-P100HT((鉻鎳鐵合金718)耐熱鎳基鍍銀長螺紋細螺柄T形頭螺栓 等級：1275 MPa(環境溫
| Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 ℃
|
| EN 2942-1998
| 航空航天系列 NI-PH2801(鉻鎳鐵合金X750)耐熱鎳基合金鍍銀螺旋形自鎖式螺紋插件
| Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated
|
| EN 3008-1998
| 航空航天系列 NI-P100HT(鉻鎳鐵合金718) 耐熱鎳基合金長螺紋細柄六角頭螺栓 等級：1275MPa(環境溫度)/650
| Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650℃
|
| EN 3009-1998
| 航空航天系列 鍍銀NI-P100HT(鉻鎳鐵合金718) 耐熱鎳基合金長螺紋細柄六角頭螺 栓 等級：1275MPa(環境溫度
| Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650℃
|
| EN 3236-1998
| 航空航天系列 鍍銀耐熱鎳基合金NI-P100HT(鉻鎳鐵合金718) 薄壁自鎖緊短內螺紋插件
| Aerospace series - Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread
|
| EN 3237-1998
| 航空航天系列 鍍銀耐熱鎳基合金NI-P100HT(鉻鎳鐵合金718) 薄壁自鎖緊長內 螺紋插件
| Aerospace series - Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread
|
| EN 3297-1998
| 航空航天系列 NI-P100HT(鉻鎳鐵合金718)耐熱鎳基合金MJ螺紋薄壁自鎖緊插件 技術規范
| Aerospace series - Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Technical specification
|
| EN 3542-1998
| 航空航天系列 耐熱鎳基合金NI-PH2801(鉻鎳鐵合金X750)螺旋形線圈自鎖式螺紋插件
| Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2081 (Inconel X750)
|
| GB/T 11297.10-1989
| 熱釋電材料居里溫度 TC 的測試方法
| Test method for curie temperature of TC pyroelectric materials
|
| GB/T 12725-1991
| 鐵鎳堿性蓄電池總規范
| General specification for alkaline nickel-iron rechar geable batteries
|
| GB/T 3389.3-2001
| 壓電陶瓷材料性能試驗方法居里溫度TC的測試
| Test methods for the properties of piezoelectric ceramics test for Curie temperature TC
|
| ISO 11400-1992
| 鎳、鎳鐵和鎳合金 磷含量的測定 二氧磷釩鉬分子吸收光譜法
| Nickel, ferronickel and nickel alloys; determination of phosphorus content; phosphovanadomolybdate molecular absorption spectrometric method
|
| ISO 11438-1-1993
| 鎳鐵 用電熱原子吸收光譜法對痕量元素含量 第1部分:一般要求和樣品分解
| Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 1: general requirements and sample dissolution
|
| ISO 11438-2-1993
| 鎳鐵 用電熱原子吸收光譜法對痕量元素含量 第2部分:鉛含量的測定
| Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 2: determination of lead content
|
| ISO 11438-3-1993
| 鎳鐵 用電熱原子吸收光譜法對痕量元素含量 第3部分:銻含量的測定
| Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 3: determination of antimony content
|
| ISO 11438-4-1993
| 鎳鐵 用電熱原子吸收光譜法對痕量元素含量 第4部分:錫含量的測定
| Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 4: determination of tin content
|
| ISO 11438-5-1993
| 鎳鐵 用電熱原子吸收光譜法對痕量元素含量 第5部分:碲含量的測定
| Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 5: determination of tellurium content
|
| ISO 11438-6-1993
| 鎳鐵 用電熱原子吸收光譜法對痕量元素含量 第6部分:鉈含量的測定
| Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 6: determination of thallium content
|
| ISO 11438-7-1993
| 鎳鐵 用電熱原子吸收光譜法對痕量元素含量 第7部分:銀含量的測定
| Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 7: determination of silver content
|
| ISO 11438-8-1993
| 鎳鐵 用電熱原子吸收光譜法對痕量元素含量 第8部分:銦含量的測定
| Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 8: determination of indium content
|
| ISO 6352-1985
| 鎳鐵 鎳含量的測定 丁二酮肟重量分析法
| Ferronickel; Determination of nickel content; Dimethylglyoxime gravimetric method
|
| ISO 6501-1988
| 鎳鐵 規范與交貨條件
| Ferronickel; specification and delivery requirements
|
| ISO 7520-1985
| 鎳鐵 鈷含量的測定 火焰原子吸收光譜測定法
| Ferronickel; Determination of cobalt content; Flame atomic absorption spectrometric method
|
| ISO 7524-1985
| 鎳、鎳鐵和鎳合金 碳含量的測定 感應電爐燃燒后紅外線吸收法
| Nickel, ferronickel and nickel alloys; determination of carbon content; infra-red absorption method after induction furnace combustion
|
| ISO 7526-1985
| 鎳、鎳鐵和鎳合金 硫含量的測定 感應電爐燃燒后紅外線吸收法
| Nickel, ferronickel and nickel alloys; Determination of sulfur content; Infra-red absorption method after induction furnace combustion
|
| ISO 7527-1985
| 鎳、鎳鐵和鎳合金 硫含量的測定 感應電爐燃燒后碘量滴定法
| Nickel, ferronickel and nickel alloys; Determination of sulfur content; Iodimetric titration method after induction furnace combustion
|
| ISO 8049-1988
| 鎳鐵丸 分析取樣
| Ferronickel shot; sampling for analysis
|
| ISO 8050-1988
| 鎳鐵合金錠或塊 分析取樣
| Ferronickel ingots or pieces; sampling for analysis
|
| ISO 8343-1985
| 鎳鐵 硅含量的測定 重量法
| Ferronickel; Determination of silicon content; Gravimetric method
|
| JIS A5011-2-2003
| 混凝土用礦渣集料.第2部分:鎳鐵礦渣集料
| Slag aggregate for concrete -- Part 2: Ferronickel slag aggregate
|
| JIS G1326-2000
| 鎳鐵的化學分析方法
| Methods for chemical analysis of ferronickel
|
| JIS G1604-2000
| 鐵合金化學分析的取樣方法(第4部分:鎳鐵合金)
| Methods of sampling for chemical analysis of ferroalloys (Part 4: Ferronickel)
|
| JIS G2316-2000
| 鎳鐵
| Ferronickel
|
| NF A10-621-1992
| 鎳、鎳鐵和鎳合金.硫的測定.通過在感應爐內燃燒后的紅外線吸收法
| (Nickel, ferronickel and nickel alloys. Determination of sulfur content. Infra-red absorption method after induction furnace combustion.)
|
| NF A10-622-1992
| 鎳、鎳鐵和鎳合金.硫的測定.感應爐內燃燒后碘量滴定法
| (Nickel, ferronickel and nickel alloys. Determination of sulfur content. Iodimetric titration method after induction furnace combustion.)
|
| NF A10-656-1968
| 鎳鐵合金的化學分析.鎳鈷總含量的電解法測定
| (CHEMICAL ANALYSIS OF FERRO-NICKEL. ELECTROLYTIC DETERMINATION OF TOTAL NICKEL + COBALT.)
|
| NF A13-602-1992
| 鐵鎳合金球.分析取樣
| (FERRONICKEL SHOT. SAMPLING FOR ANALYSIS. (EUROPEAN STANDARD EN 28409).)
|
| NF A13-603-1992
| 鎳鐵塊或件.分析用取樣
| (Ferronickel ingots or pieces. Sampling for analysis.)
|
| NF A54-301-1973
| 鎳和鎳合金.具有延伸特征的鐵鎳合金
| (NICKEL AND NICKEL ALLOYS. IRON-NICKEL ALLOYS WITH PARTICULAR DILATABILITY.)
|
| NF L24-030-1997
| 航空航天系列.鎳基合金NI-PH2601(鉻鎳鐵合金718)制耐熱MJ螺紋螺栓.等級:1275MPA(室溫)/650℃.技術規范(歐洲
| (AEROSPACE SERIES. BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718). CLASSIFICATION : 1275 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2583).)
|
| NF L24-960-1998
| 航空系列.耐熱鎳基合金NI-P100HT(鉻鎳鐵合金718)自鎖緊薄壁MJ螺紋插入物.技術規范
| (Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Technical specification.)
|
| NF L24-961-1998
| 航空系列.耐熱鎳基合金NI-P100HT(鉻鎳鐵合金718)鍍銀內短螺紋自鎖緊薄壁插入物
| (Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread. Aerospace series.)
|
| NF L24-962-1998
| 航空系列.耐熱鎳基合金NI-P100HT(鉻鎳鐵合金718)鍍銀內長螺紋自鎖緊薄壁插入物
| (Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread. Aerospace series.)
|
| YB/T 5231-2005
| 定膨脹封接鐵鎳鈷合金
| ()
|
| YB/T 5235-2005
| 定膨脹封接鐵鎳鉻、鐵鎳合金
| ()
|
| YB/T 5236-2005
| 杜美絲芯用鐵鎳合金4J43
| ()
|
| YB/T 5237-2005
| 玻封鐵鎳銅合金4J41
| ()
|
| YB/T 5238-2005
| 線紋尺用定膨脹鐵鎳合金4J58
| ()
|
| YB/T 5241-2005
| 低膨脹鐵鎳、鐵鎳鈷合金
| ()
|
| YS/T 634-2007
| 羰基鎳鐵粉
| Ferronickel Carbonyl Powder
|
| prEN 3913-1999
| 航空航天系列 部件修復用耐熱鎳基合金 NI-PH2601 (NI-P100HT鉻鎳鐵合金718)、薄壁自鎖短內螺紋上鍍銀的插
| Aerospace series - Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT,Inconel 718), silver plated internal thread, for salvage of components
|
| prEN 3914-1999
| 航空航天系列 部件修復用耐熱鎳基合金 NI-PH2601 (NI-P100HT鉻鎳鐵合金718)、薄壁自鎖長上鍍銀的插件
| Aerospace series - Insert, thin wall, self-locking, long, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT,Inconel 718), silver plated on internal thread, for salvage of components
|
| prEN 3915-1999
| 航空航天系列 部件修復用耐熱鎳基合金 NI-PH2601 (NI-P100HT鉻鎳鐵合金718)、薄壁自鎖ＭＪ螺紋插件 等級
| Aerospace series - Insert, thin wall, self-locking, Mj threads, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT,Inconel 718), for salvage of components, classification: 1275 MPa (at ambient temperature)/550℃ - Technical specification
|
| 編號 | 中文名稱 | 英文名稱 |
|---|