| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 18506-2002 | 液壓道路粘結劑.組分、規范和符合性準則 | Hydraulic road binders - Composition, specifications and conformity criteria |
| DIN 18910-1-2004 | 封閉廄的熱絕緣.熱絕緣和強制通風.第1部分:封閉通風廄的計劃和設計的準則 | Thermal insulation for closed livestock buildings - Thermal insulation and ventilation forced - Part 1: Principles for planning and design for closed ventilated livestock buildings |
| DIN 19704-1-1998 | 鋼制液壓結構件.第1部分:設計和計算準則 | Hydraulic steel structures - Part 1: Criteria for design and calculation |
| DIN 25449-1987 | 核電站中鋼筋混凝土構件承受因內部故障引起的負荷的設計準則 | Design criteria for reinforced concrete subject to loadings as a result of internal incidents in nuclear power plants |
| DIN 29583-1987 | 航空航天.飛行器的丙烯酸塑料門窗玻璃的維護和修理.一般準則 | Aerospace; maintenance and repairing of aircraft glazings of acrylic plastics; general directions |
| DIN 3771-4-1984 | 液壓系統.Ｏ型密封圈.質量驗收準則 | Fluid systems; O-rings; quality acceptance criteria |
| DIN 5030-5-1987 | 發射光的光譜測量.發射光的光譜測量用物理探測器.術語、特性值、選擇準則 | Spectral measurement of radiation; physical detectors for spectral measurement of radiation; terminology, characteristic quantities, selection criteria |
| DIN 51002-1-2004 | 電感耦合等離子體質譜法.第1部分:準則和定義 | Inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: Principles and definitions |
| DIN 53803-3-1984 | 抽樣.按照兩組完全相同排列準則交叉分類的抽樣統計原理 | Sampling; statistical principles of sampling with cross classification according to two equal-ranked criteria |
| DIN 53803-4-1984 | 抽樣.按照兩組不同分級準則交叉分類的抽樣統計原理 | Sampling; statistical principles of sampling with cross classification according to two hierarchical criteria |
| DIN 58959-13-1997 | 醫用微生物學質量管理.第13部分:靈敏度檢驗對照菌株用有效物料極限值測定準則 | Quality management in medical microbiology - Part 13: Criteria for determination of active substance breakpoint for control strains used in susceptibility testing |
| DIN 58985-2003 | 實驗室醫學.決策標記準則 | Laboratory medicine - Decision-marking criteria |
| DIN CEN/TS 15331-2006 | 建筑物維修設備的設計、管理和控制準則.德文版本 CEN/TS 15331-2005 | Criteria for design, management and control of maintenance services for buildings; German version CEN/TS 15331:2005 |
| DIN EN 12266-1-2003 | 工業用閥門.閥門試驗.第1部分:壓力試驗、試驗程序和驗收準則.強制性要求 | Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements; German version EN 12266-1:2003 |
| DIN EN 12440-2001 | 天然石料.命名準則 | Natural stone - Denomination criteria; German version EN 12440:2000 |
| DIN EN 1317-1-1998 | 道路限制系統.第1部分:術語和試驗方法的通用準則 | Road restraint systems - Part 1: Terminology and general criteria for test methods; German version EN 1317-1:1998 |
| DIN EN 1317-2-2006 | 道路限制系統.第2部分:安全障壁的性能等級、沖撞驗收試驗準則和試驗方法 | Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers English version of DIN EN 1317-2:2006-08 |
| DIN EN 13312-1-2001 | 生物技術.管路和儀器性能準則.第1部分:通用性能準則 | Biotechnology - Performance criteria for piping and instrumentation - Part 1: General performance criteria; German version EN 13312-1:2001 |
| DIN EN 13312-2-2001 | 生物技術.管路和儀器性能準則.第2部分:轉接 | Biotechnology - Performance criteria for piping and instrumentation - Part 2: Couplings; German version EN 13312-2:2001 |
| DIN EN 13312-3-2001 | 生物技術.管路和儀器性能準則.第3部分:取樣和接種設備 | Biotechnology - Performance criteria for piping and instrumentation - Part 3: Sampling and inoculation devices; German version EN 13312-3:2001 |
| DIN EN 13312-4-2001 | 生物技術.管路和儀器性能準則.第4部分:管件 | Biotechnology - Performance criteria for piping and instrumentation - Part 4: Tubes and pipes; German version EN 13312-4:2001 |
| DIN EN 13312-5-2001 | 生物技術.管路和儀器性能準則.第5部分:閥門 | Biotechnology - Performance criteria for piping and instrumentation - Part 5: Valves; German version EN 13312-5:2001 |
| DIN EN 13804-2002 | 食品.痕量元素測定.實施準則、一般考慮和樣品制備 | Foodstuffs - Determination of trace elements - Performance criteria, general considerations and sample preparation; German version EN 13804:2002 |
| DIN EN 14216-2004 | 水泥.超低熱特種水泥的組分、規范和合格準則 | Cement - Composition, specifications and conformity criteria for very low heat special cements; German version EN 14216:2004 |
| DIN EN 1760-3 Berichtigung 1-2006 | 機器的安全性.壓敏保護裝置.第3部分:壓敏減震器、壓敏板、壓敏線和類似設備的設計和試驗的一般準則.對DIN E | Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices; German version EN 1760-3:2004, Corrigenda to DIN EN 1760-3:2004-10; German version EN 1760-3:2004/AC:2006 |
| DIN EN 1760-3-2004 | 機器的安全性.壓敏保護裝置.第3部分:壓敏減震器、壓敏板、壓敏線和類似設備的設計和試驗的一般準則 | Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices; German version EN 1760-3:2004 |
| DIN EN 1825-1-2004 | 油脂分離器.第1部分:設計、性能和試驗以及標記和質量控制的準則 | Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004 |
| DIN EN 1946-1-1999 | 建筑產品和建筑部件的熱性能.熱傳導性能實驗室評估專用準則.第1部分:通用準則 | Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 1: Common criteria; German version EN 1946-1:1999 |
| DIN EN 1946-2-1999 | 建筑產品和建筑部件熱性能.熱傳導性能實驗室評估專用準則.第2部分:平板儀法測量 | Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 2: Measurements by the guarded hot plate method; German version EN 1946-2:1999 |
| DIN EN 1946-3-1999 | 建筑產品和建筑部件熱性能.熱傳導性能實驗室評估專用準則.第3部分:熱流測量平板儀法 | Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 3: Measurements by the guarded heat flow meter method; German version EN 1946-3:1999 |
| DIN EN 1946-4-2000 | 建筑產品和建筑部件的熱性能.實驗室評估熱傳導性能專用準則.第4部分:高溫箱測量法 | Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 4: Measurements by hot box methods; German version EN 1946-4:2000 |
| DIN EN 1946-5-2000 | 建筑產品和部件熱性能.實驗室評估熱傳導性能專用準則.第5部分:管試驗測量法 | Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 5: Measurements by pipe test methods; German version EN 1946-5:2000 |
| DIN EN 459-1-2002 | 建筑石灰.第1部分:定義、規范和符合性準則 | Building lime - Part 1: Definitions, specifications and conformity criteria; German version EN 459-1:2001 |
| DIN EN 60383-1-1997 | 公稱電壓高于1000V的架空線路絕緣子.第1部分:交流系統用陶瓷或玻璃絕緣子的定義、試驗方法和驗收準則 | Insulators for overhead lines with a nominal voltage above 1 kV - Part 1: Ceramic or glass insulator units for a.c. systems; definitions, test methods and acceptance criteria (IEC 60383-1:1993); German version EN 60383-1:1996 |
| DIN EN 60383-2-1995 | 公稱電壓高于1000V的架空線路絕緣子.第2部分:交流電路系統絕緣子串和絕緣子裝置.試驗方法和驗收準則 | Insulators for overhead lines with a nominal voltage above 1000 V - Part 2: Insulator strings and insulator sets for a.c. systems; definitions, test methods and acceptance criteria (IEC 60383-2:1993); German version EN 60383-2:1995 |
| DIN EN 61325-1996 | 額定電壓1000V以上架空線絕緣子.直流系統陶瓷或玻璃絕緣子.定義、試驗方法和驗收準則 | Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria (IEC 61325:1995); German version EN 61325:1995 |
| DIN EN 62217 Berichtigung 1-2007 | 標稱電壓大于1000V的室內外用聚合絕緣子.通用定義、試驗方法和驗收準則(IEC 62217-2005) | Polymeric insulators for indoor and outdoor use with a nominal voltage ?1 000 V - General definitions, test methods and acceptance criteria (IEC?62217:2005); German version EN 62217:2006, Corrigenda to DIN EN 62217 (VDE 0441-1000):2006-11; German version CENELEC-Cor.:2006 to EN 62217:2006 |
| DIN EN 62217-2006 | 標稱電壓大于1000V的室內外用聚合絕緣子.定義、試驗方法和驗收準則(IEC 62217:2005) | Polymeric insulators for indoor and outdoor use with a nominal voltage > 1000 V - General definitions, test methods and acceptance criteria (IEC 62217:2005); German version EN 62217:2006 |
| DIN EN 81-80-2004 | 電梯建造和安裝的安全準則.現有電梯.第80部分:提高現有載人電梯和客貨兩用電梯安全性的規則 | Safety rules for the construction and installation of lifts - Existing lifts - Part 80: Rules for the improvement of safety of existing passenger and goods passenger lifts; German version EN 81-80:2003 |
| DIN EN ISO 10075-3-2004 | 與心理負荷有關的人類工效學原則.第3部分:心理負荷測量和評估方法的準則和要求 | Ergonomic principles related to mental workload - Part 3: Principles and requirements concerning methods for measuring and assessing mental workload (ISO 10075-3:2004); German version EN ISO 10075-3:2004 |
| DIN EN ISO 14111-2000 | 天然氣.分析溯源性準則 | Natural gas - Guidelines to traceability in analysis (ISO 14111:1997); German version EN ISO 14111:1999 |
| DIN EN ISO/IEC 17020-2004 | 各類檢查機構運行的一般準則 | General criteria for the operation of various types of bodies performing inspection (ISO/IEC 17020:1998); German and English version EN ISO/IEC 17020:2004 |
| DIN ISO 11217-1994 | 航空航天.液壓系列流體污染物.取樣點定位和取樣準則 | Aerospace; hydraulic system fluid contamination; location of sampling points and criteria for sampling; identical with ISO 11217:1993 |
| DIN V 65900-17-2001 | 航空航天系列.O形環槽.O形環槽設計準則.基本計算 | Aerospace series - O-ring grooves - Design criteria for O-ring grooves, basic calculations (AECMA Technical Report TR 4271:2000) |
| DIN-Fachbericht 122-2002 | 國家應用文獻(NAD).DIN V ENV 1993-3-2:2002的應用準則.歐洲法規3:鋼結構的測量和設計.第3-2部分:鐵塔,電桿 | () |
| DIN-Fachbericht 126-2002 | 國家應用文獻(NAD).DIN V ENV 1993-6的應用準則.歐洲法規3:第6部分:起重機軌道 | () |
| DIN-Fachbericht 91-2000 | 國家應用文獻(NAD).DIN V ENV 1991-2-2:1997的應用準則.歐洲法規1:支承結構規劃的基礎和對支承結構的作用. | () |
| DIN-Fachbericht 92-2000 | 國家應用文獻(NAD).DIN V ENV 1992-1-2-1997的應用準則.歐洲法規2:鋼筋混凝土支撐結構的計劃.第1-2部分:通 | () |
| DIN-Fachbericht 93-2000 | 國家應用文獻(NAD).DIN V ENV 1993-1-2-1997的使用準則.歐洲法規3:鋼構件的測量和建造.第1-2部分:通則.火災 | () |
| DIN-Fachbericht 94-2000 | 國家應用文獻(NAD).DIN V ENV 1994-1-2-1997的應用準則.歐洲法規4:鋼、混凝土組合支撐結構的測量和建造.第1 | () |
| DIN-Fachbericht 95-2000 | 國家應用文獻(NAD).DIN V ENV 1995-1-2-1997的應用準則.歐洲法規5:木結構的測量和建造.第1-2部分:通則.火災 | () |
| DIN-Fachbericht 96-2000 | 國家應用文獻(NAD).DIN V ENV 1996-1-2-1997的應用準則.歐洲法規6:砌體結構的測量和建造.第1-2部分:通則.火 | () |
| 編號 | 中文名稱 | 英文名稱 |