| 編號 | 中文名稱 | 英文名稱 |
|---|
| NF C46-401-1993
| 工業過程控制系統用模擬信號控制器.第1部分:性能評估方法
| (Controllers with analogue signals for use in industrial-process control systems. Part 1 : methods of evaluating the performance.)
|
| NF C46-402-1993
| 工業過程控制系統中用模擬信號控制器.第2部分:檢驗和常規試驗指南
| (Controllers with analogue signals for use in industrial-process control systems. Part 2 : guidance for inspection and routine testing.)
|
| NF C46-421-1996
| 工業過程控制系統.鑒定用自適應控制器的分類
| (Industrial-process control systems. Classification of adaptive controllers for the purpose of evaluation.)
|
| NF C46-500-2002
| 工業過程控制系統.帶氣壓輸出的閥位控制器性能評估方法
| (Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs.)
|
| NF C46-603-1990
| 發送器,致動器和可編程序控制器間信息交換用文件傳送協議總線.數據鏈層
| (Fip bus for exchange of information between transmitters, actuators and programmable controllers. Data link layer.)
|
| NF C46-613-1994
| 可編程控制器.第1部分:一般信息
| (Programmable controllers. Part 1 : general information.)
|
| NF C46-614-1994
| 程序控制器.第2部分:設備要求和試驗
| (Programmable controllers. Part 2 : equipment requirements and test.)
|
| NF C46-614/A2-2000
| 程序控制器.第2部分:設備要求和試驗
| (Programmable controllers - Part 2 : equipment requirements and test.)
|
| NF C46-615-2003
| 程序控制器.第3部分:程序設計語言
| (Programmable controllers - Part 3 : programming languages.)
|
| NF C46-617-2001
| 可編程控制器.第5部分:通信
| (Programmable controllers - Part 5 : communications.)
|
| NF C46-619-2001
| 可編程控制器.第7部分:模糊控制編程
| (Programmable controllers - Part 7 : fuzzy control programming.)
|
| NF C46-660-1-2003
| 控制器裝置接口用的基于ISO 11898的工業通信子系統.第1部分:一般要求
| (Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 1 : general requirements.)
|
| NF C46-660-3-2001
| 控制器裝置接口用的基于ISO 11898的工業通信子系統.第3部分:智能分布系統
| (Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 3 : Smart Distributed System (SDS).)
|
| NF C46-660-4-2003
| 控制器裝置接口用的基于ISO 11898的工業通信子系統.第4部分:CANopen
| (Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 4 : CANopen.)
|
| NF C47-734/A2-2003
| 家用和類似用途的自動電控制器.第2-4部分:密封和半密封電動壓縮機組的電動機熱保護器的特殊要求
| (Automatic electrical controls for household and similar use - Part 2-4 : particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type.)
|
| NF C47-735-2002
| 家用和類似用途的電氣自動控制器.第2-5部分:自動電燃燒器控制系統的特殊要求
| (Automatic electrical controls for household and similar use - Part 2-5 : particular requirements for automatic electrical burner control systems.)
|
| NF C47-736-1995
| 家用和類似用途的自動電控制設備.第2部分:自動電壓敏控制器件包括機械要求在內的特殊要求
| (Automatic electrical controls for household and similar use. Part 2 : particular requirements for automatic electrical pressure sensing controls including memchanical requirements.)
|
| NF C47-737/A13-2003
| 家用和類似用途的電自動控制器.第2-7部分:定時器和定時開關的特殊要求
| (Automatic electrical controls for household and similar use - Part 2-7 : particular requirements for timers and time switches.)
|
| NF C47-738-2002
| 家用和類似用途的電氣自動控制器.第2-8部分:電動水閥的特殊要求,包括機械要求
| (Automatic electrical controls for household and similar use - Part 2-8 : particular requirements for electrically operated water valves, including mechanical requirements.)
|
| NF C47-739-2002
| 家用和類似用途的電氣自動控制器.第2-9部分:熱敏控制器特殊要求
| (Automatic electrical controls for household and similar use - Part 2-9 : particular requirements for temperature sensing controls.)
|
| NF C47-739/A11-2003
| 家用和類似用途電器用自動電控制器.第2-9部分:熱敏控制器的特殊要求
| (Automatic electrical controls for household and similar use - Part 2-9 : particular requirements for temperature sensing controls.)
|
| NF C47-7391-1997
| 家用和類似用途電器的自動電控制器.第2部分:第9節:熱敏控制器的特殊要求.第1次修改
| ()
|
| NF C47-740/A2-2003
| 家用和類似用途的自動電控制器.第2-10部分:電動機起動繼電器的特殊要求
| (Automatic electrical controls for household and similar use - Part 2-10 : particular requirements for motor starting relays.)
|
| NF C47-743-1998
| 家用和類似用途的電氣自動控制器.第2部分:濕度感應控制器特別要求
| (Automatic electrical controls for household and similar use. Part 2 : particular requirements for humidity sensing controls.)
|
| NF C47-743/A2-2002
| 家用及類似用途的電自動控制器.第2-13部分:濕敏控制器的特殊要求
| (Automatic electrical controls for household and similar use - Part 2-13 : particular requirements for humidity sensing controls.)
|
| NF C47-746-1998
| 家用和類似用途的自動電控制設備.第2部分:家用和類似用途浮子式水位自動電控制器的特殊要求
| (Automatic electrical controls for household and similar use. Part 2 : particular requirements for automatic electrical water level operating controls of the float type for household and similar applications.)
|
| NF C47-748-1999
| 家用及類似用途的電自動控制器.第2部分:包括機械要求的自動水和空氣流量感應控制器的特殊要求
| (Automatic electrical controls for household and similar use - Part 2 : particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements.)
|
| NF C47-749-2002
| 家用和類似用途的電氣自動控制器.第2-19部分:電氣操作油閥門的特殊要求,包括機械要求
| (Automatic electrical controls for household and similar use - Part 2-19 : particular requirements for electrically operated oil valves, including mechanical requirements.)
|
| NF C48-343-2002
| 警報系統.公共警報系統.第3部分:固定裝置和控制器
| (Alarm systems - Social alarm systems - Part 3 : local unit and controller.)
|
| NF C48-438-2002
| 報警系統.侵入檢測.事件控制器.與中央報警裝置或電話報警送話器相結合的記錄功能
| (Alarm systems - Intrusion detection - Events controller-recorder function integrated in central alarm units or telephone alarm transmitters.)
|
| NF C63-112-2000
| 低壓開關設備和控制設備.第4-2部分:接觸器和電動機起動器.交流半導體電動機控制器和起動器
| (Low-voltage switchgear and controlgear - Part 4-2 : contactors and motor-starters - A.C. semiconductor motor controllers and starters.)
|
| NF C63-112/A1-2002
| 低壓開關設備和控制設備.第4-2部分:接觸器和電動機啟動器.交流電流半導體控制器和啟動器
| (Low-voltage switchgear and controlgear - Part 4-2 : contactors and motor-starters - AC semiconductor motor controllers and starters.)
|
| NF C63-113-2000
| 低壓開關設備和控制設備.第4-3部分:接觸器和電動機起動器.非電動機負載用交流半導體控制器和接觸器
| (Low-voltage switchgear and controlgear - Part 4-3 : contactors and motor-starters - A.C. semiconductor controllers and contactors for non-motor loads.)
|
| NF C63-211M1-1974
| 低壓工業設備.低壓開關和控制器.額定電壓為500V的交流熔斷器.補充要求.內部帶撞擊器的熔斷器.單撞擊器
| (LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR. FUSES FOR A. C. CIRCUITS RATED 500 V. ADDITIONAL REQUIREMENTS : STRIKER FUSES - INDEPENDENT STRIKERS.)
|
| NF C74-304-2003
| 醫用電氣設備.第2-24部分:輸液泵及其控制器的安全特殊要求
| (Medical electrical equipment Part 2-24 : particular requirements for the safety of infusion pumps and controllers.)
|
| NF D36-204-1993
| 除工藝過程用之外的燃?xì)馄骶吆陀嘘P(guān)控制器的潤滑劑
| (LUBRICANTS FOR APPLICATIONS IN APPLIANCES AND ASSOCIATED CONTROLS USING COMBUSTIBLE GASES EXCEPT THOSE DESIGNED FOR USE IN INDUSTRIAL PROCESSES. (EUROPEAN STANDARD EN 377).)
|
| NF D36-305-1995
| 燃?xì)馄骶叩亩喙δ芸刂破? | (Multifunctional controls for gas burning appliances.)
|
| NF D36-391-1/A1-2003
| 燃?xì)馊紵骱腿細庋b置用燃?xì)?空氣比率控制器.第1部分:氣動結構類型
| (Gas/air ratio controls for gas burners and gas burning appliances - Part 1 : pneumatic types.)
|
| NF L58-110-1970
| 開關.轉換開關.控制器
| (LEVER AND BUTTON OPERATED CONTROL SWITCHES. (RECH.).)
|
| NF P52-701-2-2001
| 加熱系統用控制器.第2部分:熱水加熱系統用最佳啟-停控制設備
| (Controls for heating systems - Part 2 : optimum start-stop control equipment for hot water heating systems.)
|
| NF P52-701-3-2003
| 加熱系統用控制器.第3部分:電加熱系統用外部溫度補償控制設備
| (Controls for heating systems - Part 3 : outside temperature compensated control equipment for electrical heating system.)
|
| NF P99-022-1-2003
| 道路交通管理.交通信號控制器.第1部分:控制器的試驗方法
| (Road traffic control - Traffic signal controllers - Part 1 : method of test of controllers.)
|
| NF P99-071-1-2002
| 道路交通信號控制.控制器標準對話規范.第1部分:DIASER 規范(交通控制設備的標準對話)
| (Road traffic signal control - Controller standard dialogue specification - Part 1 : DIASER specification (standard dialogue for traffic control equipment).)
|
| NF P99-100-2003
| 交通信號控制器.功能及操作的安全規范
| (Traffic signal controllers - Functional and operational safety specifications.)
|
| NF P99-101-2000
| 交通信號燈控制器.功能安全要求
| (Traffic signal controllers - Functional safety requirements.)
|
| NF P99-105-1991
| 道路交通管理.路口信號燈的控制器.功能特性
| (ROAD TRAFFIC CONTROL. TRAFFIC SIGNAL CONTROLLER. FUNCTIONAL SPECIFICATIONS.)
|
| NF P99-110-1990
| 道路交通管理.交通信號控制器.帶外部設備的并行數據交換.功能規范和連接性能
| (ROAD TRAFFIC CONTROL. TRAFFIC SIGNAL CONTROLLER. PARALLEL EXCHANGES OF DATA WITH EXTERNAL UNITS. FUNCTIONAL SPECIFICATIONS AND CONNECTION CHARACTERISTICS.)
|
| NF Z66-800-2-1994
| 信息處理系統.光纖排列數據接口(FDDI).第2部分:中速存取控制器(MAC)標志環
| (INFORMATION PROCESSING SYSTEMS. FIBRE DISTRIBUTED DATA INTERFACE (FDDI). PART 2 : TOKEN RING MEDIA ACCESS CONTROL (MAC). (EUROPEAN STANDARD EN 29314-2).)
|
| NF Z66-802-1995
| 信息處理系統.接口和盒式軟磁盤機之間以及它們的主機控制器
| (Information processing systems. Interface between flexible disk cartridge drives and their host controllers.)
|
| NF Z83-592-1998
| 蜂窩式數字通信系統(階段2).基礎站控制器.收發兩用基礎站(BSC-BTS)接口.一般特性(GSM 08.51)
| (Digital cellular telecommunications system (Phase 2). Base Station Controller. Base Transceiver Station (BSC - BTS) interface. General aspects (GSM 08.51).)
|
| NF Z83-593-1998
| 蜂窩式數字通信系統(階段2).基礎站控制器.收發兩用基礎站(BSC-BTS)接口.接口原子(GSM 08.52)
| (Digital cellular telecommunications system (Phase 2). Base Station Controller. Base Transceiver Station (BSC - BTS) interface. Interface principles (GSM 08.52).)
|
| NF Z83-594-1998
| 蜂窩式數字通信系統(階段2).基礎站控制器.收發兩用基礎站(BSC-BTS)接口.實線電路的層1結構(GSM 08.54)
| (Digital cellular telecommunications system (Phase 2). Base Station Controller. Base Transceiver Station (BSC - BTS) interface. Layer 1 structure of physical circuits (GSM 08.54).)
|
| NF Z83-595-1998
| 蜂窩式數字通信系統(階段2).基礎站控制器.收發兩用基礎站(BSC-BTS)接口.層2規范(GSM 08.56)
| (Digital cellular telecommunications system (Phase 2). Base Station Controller. Base Transceiver Station (BSC - BTS) interface. Layer 2 specification (GSM 08.56).)
|
| NF Z83-596-1999
| 數字蜂窩式電信系統(2).基站控制器.無線電接收機基站(BSS-BTS)接口.層3規范
| (Digital cellular telecommunications system (Phase 2). Base Station Controller. Base Transceiver Station (BSC-BTS) interface. Layer 3 specification (GSM 08.58, version 4.9.0).)
|
| 編號 | 中文名稱 | 英文名稱 |
|---|