| 編號 | 中文名稱 | 英文名稱 |
|---|
| DIN 1055-10-2004
| 結構物的設計基礎和作用.第10部分:起重機和機械引起的作用
| Basis of design and action on structures - Part 10: Actions induced by cranes and machinery
|
| DIN 15001-1-1973
| 起重機.第1部分:詞匯、按型號的分類
| Cranes; Vocabulary, classification according to type
|
| DIN 15001-2-1975
| 起重機:第2部分:詞匯.按用途分類
| Cranes; Vocabulary, classification according to application
|
| DIN 15002-1980
| 起重機.承載裝置.詞匯
| Lifting appliances; Load carrying devices; Vocabulary
|
| DIN 15018-1-1984
| 起重機.鋼結構.驗證和計算
| Cranes; steel structures; verification and analyses
|
| DIN 15018-2-1984
| 起重機.鋼結構.設計與制造原則
| Cranes; steel structures; principles of design and construction
|
| DIN 15018-3-1984
| 起重機.有關鋼結構的原理.車載起重機的計算
| Cranes; principles relating to steel structures; design of cranes on vehicles
|
| DIN 15019-1-1979
| 起重機.第1部分:除無軌安裝移動式起重機和浮吊之外的所有起重機的穩定性
| Cranes; Stability for All Cranes Except Non-rail Mounted Mobile Cranes and Except Floating Cranes
|
| DIN 15019-2-1979
| 起重機.無軌安裝移動式起重機的穩定性 第2部分:試驗載荷與計算
| Cranes; Stability for Non Rail-mounted Mobile Cranes; Test Loading and Calculation
|
| DIN 15020-2-1974
| 起重機.第2部分:鋼索傳動原則.使用中監視
| Lifting Appliances; Principles Relating to Rope Drives; Supervision during Operation
|
| DIN 15022-1979
| 起重機.提升高度.作業速度
| Cranes; lifting hights, operating speeds
|
| DIN 15023-1979
| 起重機.懸臂起重機和帶懸臂梁的龍門式起重機.工作半徑
| Cranes; slewing cranes and portal cranes with cantilever, radii
|
| DIN 15024-1968
| 起重機和系列起重設備.雙梁起重機的軌距（中心至中心）
| Cranes and serial lifting appliances, track gauges (center to center) for double girder crabs
|
| DIN 15025-1978
| 起重機.起重機駕駛室內操縱桿的操縱方向和配置
| Cranes; Direction of actuation and arrangement of controls in crane cabins
|
| DIN 15049-1958
| 帶有電動葫蘆或類似提升絞車的起重機.帶滑動軸承的軌道輪
| Cranes with electric hoists or similar hoist gear; track wheels with plain bearings
|
| DIN 15050-1958
| 人工操作起重機.帶滾動軸承的軌道輪
| Hand-driven cranes; track wheels with roller bearings
|
| DIN 15053-1976
| 起重機.減速齒輪、連接尺寸、外形規格、輸出力矩
| Cranes; reduction gears, connecting dimensions, contour gauges, output torques
|
| DIN 15055-1982
| 煉鋼廠、軋鋼機和起重機.用油壓的過盈配合.用途、尺寸、結構
| Steelworks, rolling mills and cranes; interference fits using oil under pressure; application, dimensions, design
|
| DIN 15057-1978
| 起重機.滾珠和滾柱軸承的蓋.連接尺寸
| Cranes; covers for ball and roller bearings, connecting dimensions
|
| DIN 15061-1-1977
| 起重機.繩索槽輪的槽剖面
| Lifting appliances; groove profiles for wire rope sheaves
|
| DIN 15061-2-1977
| 起重機.鋼絲繩卷筒上的槽形
| Cranes; groove profiles for wire rope drums
|
| DIN 15062-1-1982
| 起重機.繩輪.選擇范圍和直徑與寬度的配合
| Cranes; rope pulleys; selected ranges and correlation of diameters and overall widths
|
| DIN 15062-2-1982
| 起重機.繩輪.軸承和輪轂尺寸
| Cranes; rope pulleys; dimensions of hubs and bearings
|
| DIN 15070-1977
| 提升設備.起重機軌道輪的計算
| Cranes; basic calculation of crane rail wheels
|
| DIN 15071-1977
| 提升設備.起重機軌道輪的承載的測定
| Cranes; determination of bearing load of crane rail wheels
|
| DIN 15072-1977
| 起重機.起重機軌道輪的觸軌面輪廓和不同軌輪直徑軌道的數據表
| Cranes; tread profile of crane rail wheels and table of rails for different wheel diameters
|
| DIN 15073-1977
| 起重機.導頻軌道輪的一覽表
| Cranes; table of crane rail wheels
|
| DIN 15074-1978
| 起重機..無齒輪帶滑動軸承的起重機凸緣導軌輪
| Cranes; flanged crane rail wheels with plain bearings, without gear wheel
|
| DIN 15075-1977
| 起重機.帶齒輪的裝有關節軸承的有法蘭的起重機軌道輪
| Cranes; flanged crane rail wheels, with plain bearings, with gear wheel
|
| DIN 15076-1977
| 起重機.不帶齒輪的裝有關節軸承的帶輪胎的有法蘭的起重機軌道輪
| Cranes; flanged crane rail wheels with tyre, with plain bearings, without gear wheel
|
| DIN 15077-1977
| 起重機.帶滑動軸承和齒輪的帶輪箍的起重機凸緣導軌輪.
| Cranes; flanged crane rail wheels with tyre, with plain bearings, with gear wheel
|
| DIN 15078-1977
| 起重機.不帶齒輪的裝有滾子軸承的有法蘭的起重機軌道輪
| Cranes; flanged crane rail wheels, with roller bearings, without gear wheel
|
| DIN 15079-1977
| 起重機.帶滾柱軸承和齒輪的起重機帶凸緣導軌輪
| Cranes; flanged crane rail wheels, with roller bearings, with gear wheel
|
| DIN 15080-1977
| 起重機.帶滾柱軸承、無齒輪、帶輪箍的起重機凸緣導軌輪
| Cranes; flanged crane rail wheels with tyre, with roller bearings, without gear wheel
|
| DIN 15081-1977
| 起重機.帶滾柱軸承、齒輪、帶輪箍的起重機帶凸緣導軌輪
| Cranes; flanged crane rail wheels with tyre, with roller bearings, with gear wheel
|
| DIN 15082-1-1977
| 起重機.軌道輪.螺旋連接的齒輪
| Cranes; crane rail wheels, screwed-on gear wheels
|
| DIN 15082-2-1977
| 起重機.與大齒輪壓配合的帶滾柱軸承的起重機軌道輪
| Cranes; crane rail wheels with roller bearings, pressed-on gear wheels
|
| DIN 15083-1977
| 起重機；起重機導軌輪、機加的輪箍
| Cranes; crane rail wheels, machined tyres
|
| DIN 15084-1977
| 起重機.帶滾柱軸承起重機導軌輪.軸承蓋
| Cranes; crane rail wheels with roller bearings, bearing covers
|
| DIN 15086-1977
| 起重機.裝有軸套補償滾子軸承的起重機軌道輪.
| Crane; crane rail wheels with roller bearings, flattening of axle bushes
|
| DIN 15090-1982
| 起重機.驅動輪裝置及從動輪裝置.組裝
| Cranes; driving wheel units and idler wheel units; assembly
|
| DIN 15091-1982
| 起重機.主動輪組和從動輪組.走輪軸
| Cranes; driving wheel units and idler wheel units; travelling wheel shafts
|
| DIN 15092-1982
| 起重機.驅動輪裝置及從動輪裝置.密封蓋
| Cranes; driving wheel units and idler wheel units; sealing covers
|
| DIN 15093-1982
| 起重機.主動輪組和從動輪組.走輪
| Cranes; driving wheel units and idler wheel units; travelling wheels
|
| DIN 15094-1982
| 起重機.主動輪組和從動輪組.軸承罩環
| Cranes; driving wheel units and idler wheel units; bearing cage rings
|
| DIN 15095-1982
| 起重機.驅動和轉動軸.安全盤、套筒、連接管
| Cranes; driven and rotating axles; securing discs, bushes, nipples
|
| DIN 15400-1990
| 起重吊鉤.材料、機械特性、承載能力和應力
| Lifting hooks; materials, mechanical properties, lifting capacity and stresses
|
| DIN 15401-2-1983
| 起重機用吊鉤.單鉤.帶螺紋軸的成品件
| Lifting hooks for lifting appliances; Single hooks; Finished parts with threaded shank
|
| DIN 15402-1-1982
| 起重機用吊鉤.（Ramshorn hooks）雙鉤.毛坯件
| Lifting hooks for lifting appliances; Ramshorn hooks; Unmaschined parts
|
| DIN 15402-2-1983
| 起重機用吊鉤.（Ramshorn hooks）雙鉤.帶螺紋軸的成品
| Lifting hooks for lifting appliances; Ramshorn hooks; Finished parts with threaded shank
|
| DIN 15403-1969
| 起重機的提升吊鉤.圓螺紋
| Lifting Hooks for Hoists; Knuckle Threads
|
| DIN 15404-1-1989
| 起重機吊鉤.鍛制吊鉤交貨技術條件
| Lifting hooks; technical delivery conditions for forged hooks
|
| DIN 15404-2-1988
| 起重機吊鉤.軋制吊鉤交貨技術條件
| Lifting hooks; technical delivery conditions for laminated hooks
|
| DIN 15405-1-1979
| 起重機用吊鉤.第1部分:使用中鍛制吊鉤的檢驗
| Lifting hooks; inspection of forged hooks in service
|
| DIN 15405-2-1988
| 起重機吊鉤.軋制吊鉤使用中檢查
| Lifting hooks; In-service inspection of laminated hooks
|
| DIN 15406-1969
| 起重吊鉤.手工鍛制吊鉤的描繪，指令
| Lifting hooks; tracing of hand forged hooks, directives
|
| DIN 15407-1-1977
| 起重機用吊鉤.第1部分:插口鐵水包、組件用帶測點的疊層吊鉤.主要尺寸
| Lifting hooks; laminated hooks with a point for spigot ladles, assembly, principal dimensions
|
| DIN 15408-1982
| 起重機.雙滑輪下滑車.組件
| Cranes; twin sheave bottom blocks; assembly
|
| DIN 15409-1982
| 起重機.四滑輪下滑車.組件
| Cranes; quadruple sheave bottom blocks; assembly
|
| DIN 15412-1-1983
| 起重機的底座.第1部分:橫梁毛坯
| Bottom blocks for lifting appliances; cross pieces; unmachined parts
|
| DIN 15412-2-1983
| 起重機的底座.第2部分:橫梁成品
| Bottom blocks for lifting appliances; cross pieces; finished parts
|
| DIN 15413-1983
| 起重機的下滑車.提升吊鉤螺母
| Bottom blocks for lifting appliances; lifting hook nuts
|
| DIN 15417-1982
| 起重機.下滑車.帶滑動軸承的D型繩索輪
| Cranes; bottom blocks; type D rope pulleys with plain bearings
|
| DIN 15418-1-1982
| 起重機.下滑車.無內套帶深槽滾珠軸承的C型繩輪
| Cranes; bottom blocks; type C rope pulleys with deep groove ball bearing, without internal sleeve
|
| DIN 15418-2-1982
| 起重機的下滑車.無內軸套深滾道滾珠軸承的C型繩索滑輪的間隔套
| Cranes; bottom blocks; spacer sleeves for type C rope pulleys with deep groove ball bearing, without internal sleeve
|
| DIN 15418-3-1982
| 起重機的下滑車.無內軸套深滾道滾珠軸承的C型繩索滑輪的油封蓋
| Cranes; bottom blocks; sealing covers for type C rope pulleys with deep groove ball bearing, without internal sleeve
|
| DIN 15421-1-1982
| 起重機的下滑車.帶深滾道滾珠軸承和內軸套的B型繩索滑輪
| Cranes; bottom blocks; type B rope pulleys with deep groove ball bearing and internal sleeve
|
| DIN 15421-2-1982
| 起重機.下滑車.帶深滾道滾珠軸承和內套筒的B型繩索輪的內軸套和隔離套
| Cranes; bottom blocks; internal sleeves and spacer sleeves for type B rope pulleys with deep groove ball bearing and internal sleeve
|
| DIN 15421-3-1982
| 起重機.下滑車.帶深滾道滾珠軸承和內套筒的B型繩索輪的油封蓋
| Cranes; bottom blocks; sealing covers for type B rope pulleys with deep groove ball bearing and internal sleeve
|
| DIN 15422-1-1982
| 起重機.下滑車.帶圓柱形滾動軸承和內套筒的A型繩索輪
| Cranes; bottom blocks; type A rope pulleys with cylindrical rolling bearing and internal sleeve
|
| DIN 15422-2-1982
| 起重機.下滑車.帶圓柱形滾動軸承和內套筒的A型繩索輪的內軸套和隔離套
| Cranes; bottom blocks; internal sleeves and spacer sleeves for type A rope pulleys with cylindrical rolling bearing and internal sleeve
|
| DIN 15422-3-1982
| 起重機.下滑車.帶圓柱形滾動軸承和內套筒的A型繩索輪的油封蓋
| Cranes; bottom blocks; sealing covers for type A rope pulleys with cylindrical rolling bearing and internal sleeve
|
| DIN 15450-1978
| 起重機.移動驅動用萬向軸的評價
| Cranes; evaluating of cardan shafts for travelling drives
|
| DIN 15451-1-1978
| 起重機.萬向節軸.第1部分:主要尺寸
| Cranes; cardan shafts, principle dimensions
|
| DIN 15451-2-1978
| 起重機.萬向節軸.第2部分:法蘭連接
| Cranes; cardan shafts, connection to coupling flange
|
| DIN 15452-1978
| 起重機.萬向軸的連接法蘭
| Cranes; coupling flanges for cardan shafts
|
| DIN 15453-1978
| 起重機.萬向節軸、安裝方向、維護、搬運和存放
| Cranes; cardan shafts, directives for installation, maintainance, handling and storage
|
| DIN 22400-1990
| 提升機的控制裝置.采礦用起重機和絞車
| Control units of winding engines; hoists and winches for mining
|
| DIN 4132 Bb.1-1981
| 起重機走道.鋼結構.計算、設計與制造原則.說明
| Craneways; Steel structures, Principles for calculation, design and construction, Explanations
|
| DIN 4132-1981
| 起重機走道.鋼結構.計算、設計與制造原則
| Craneways; Steel structures; Principles for calculation, design and construction
|
| DIN 4212-1986
| 加筋混凝土和預應力混凝土起重機軌道.設計和施工
| Reinforced concrete and prestressed concrete craneways; design and construction
|
| DIN 45635-61-1990
| 機器噪音測量.氣載噪聲測量.包面法.起重機
| Measurement of airborne noise emitted by machines; enveloping surface method; cranes
|
| DIN 536-1-1991
| 起重機軌道.A型、尺寸、截面特點、帶底腳緣的起重機軌道用鋼的品種
| Craine rails; dimensions, sectional properties, steel grades for crane rails with foot flange, form A
|
| DIN 536-2-1974
| F 型(扁形)起重機軌道.第2部分:尺寸、靜態值、鋼品級
| Crane Rails, Type F (Flat); Dimensions, Static Values, Steel Grades
|
| DIN CEN/TS 13001-3-1 Berichtigung 1-2006
| 起重機.一般設計.第3-1部分:鋼結構性能的極限狀態和合格檢驗
| Cranes - General design - Part 3-1: Limit states and proof of competence of steel structures; German version CEN/TS 13001-3-1:2004, Corrigenda to DIN CEN/TS 13001-3-1:2005-03; German version CEN/TS 13001-3-1:2004/AC:2006
|
| DIN CEN/TS 13001-3-1-2005
| 起重機.一般設計.第3-1部分:鋼結構性能的極限狀態和檢驗
| Cranes - General design - Part 3-1: Limit states and proof of competence of steel structures; German version CEN/TS 13001-3-1:2004
|
| DIN CEN/TS 13001-3-2 Berichtigung 1-2006
| 起重機.一般設計.第3-2部分:滑輪組中鋼索性能的極限狀態和檢驗
| Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems; German version CEN/TS 13001-3-2:2004, Corrigenda to DIN CEN/TS 13001-3-2:2005-03; German version EN 13001-3-2:2004/AC:2006
|
| DIN CEN/TS 13001-3-2-2005
| 起重機.一般設計.第3-2部分:滑輪組中鋼索性能的極限狀態和檢驗
| Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems; German version CEN/TS 13001-3-2:2004
|
| DIN EN 12077-2-2000
| 起重機安全.健康和安全要求.第2部分:限制和指示裝置
| Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices; German version EN 12077-2:1998
|
| DIN EN 1255-1995
| 內河航運船只.旋臂起重機
| Inland navigation vessels - Swing derricks; German version EN 1255:1995
|
| DIN EN 12644-1-2001
| 起重機.使用和試驗資料.第1部分:說明書
| Cranes - Information for use and testing - Part 1: Instructions; German version EN 12644-1:2001
|
| DIN EN 12644-2-2000
| 起重機.使用和試驗信息.第2部分:標記
| Cranes - Informations for use and testing - Part 2: Marking; German version EN 12644-2:2000
|
| DIN EN 12999-2003
| 起重機.裝載起重機
| Cranes - Loader cranes; German version EN 12999:2002
|
| DIN EN 12999/A1-2004
| 起重機.負載起重機
| Cranes - Loader cranes; German version EN 12999:2002/A1:2004
|
| DIN EN 12999/A2-2007
| 起重機.裝載起重機
| Cranes - Loader cranes; German version EN 12999:2002/A2:2006
|
| DIN EN 13000-2004
| 起重機.移動式起重機
| Cranes - Mobile cranes; German version EN 13000:2004
|
| DIN EN 13001-1 Berichtigung 1-2006
| 起重機.一般設計.第1部分:一般原則和要求
| Cranes - General design - Part 1: General principles and requirements; German version EN 13001-1:2004, Corrigenda to DIN EN 13001-1:2005-04; German version EN 13001-1:2004/AC:2006
|
| DIN EN 13001-1-2005
| 起重機.一般設計.第1部分:總則和要求
| Cranes - General design - Part 1: General principles and requirements; German version EN 13001-1:2004
|
| DIN EN 13001-2-2007
| 起重機.一般設計.第2部分:負載作用
| Cranes - General design - Part 2: Load actions; German version EN 13001-2:2004+AC:2006+A1:2006
|
| DIN EN 13135-1-2004
| 起重機.安全.設計.設備要求.第1部分:電工設備
| Cranes - Safety - Design - Requirements for equipment - Part 1: Electrotechnical equipment; German version EN 13135-1:2003
|
| DIN EN 13135-2 Berichtigung 1-2006
| 起重機.設備.第2部分:非電氣化學設備
| Cranes - Equipment - Part 2: Non-elektrotechnical equipment; German version EN 13135-2:2004, Corrigenda to DIN EN 13135-2:2005-02; German version EN 13135-2:2004/AC:2005
|
| DIN EN 13135-2-2005
| 起重機.設備.第2部分:非電工設備
| Cranes - Equipment - Part 2: Non-electrotechnical equipment; German version EN 13135-2:2004
|
| DIN EN 13155-2007
| 起重機.非固定式荷載提升附屬裝置
| Cranes - Non fixed load lifting attachments; German version EN 13155:2003+A1:2005
|
| DIN EN 13157-2004
| 起重機.安全.手動提升設備
| Cranes - Safety - Hand powered lifting equipment; German version EN 13157:2004
|
| DIN EN 13557-2007
| 起重機.控制器和控制站
| Cranes - Controls and control stations; German version EN 13557:2003+A1:2005
|
| DIN EN 13586 Berichtigung 1-2007
| 起重機.入口
| Cranes - Access; German version EN 13586:2004; Corrigenda to DIN EN 13586:2004-07; German version EN 13586:2004/AC:2007
|
| DIN EN 13586-2004
| 起重機.檢修孔
| Cranes - Access; German version EN 13586:2004
|
| DIN EN 13852-1 Berichtigung 2-2007
| 起重機.海上起重機.第1部分:通用海上起重機.DIN EN 13852-1-2004技術勘誤
| Cranes - Offshore cranes - Part 1: General-purpose offshore cranes; German version EN 13852-1:2004, Corrigendum to DIN EN 13852-1:2004-10; German version EN 13852-1:2004/AC:2007
|
| DIN EN 13852-1-2004
| 起重機.海上起重機.第1部分:通用海上起重機
| Cranes - Offshore cranes - Part 1: General-purpose offshore cranes; German version EN 13852-1:2004
|
| DIN EN 13852-2-2005
| 起重機.海上起重機.第2部分:浮動式起重機
| Cranes - Offshore cranes - Part 2: Floating cranes; German version EN 13852-2:2004
|
| DIN EN 14238-2004
| 起重機.手控加載操作設備
| Cranes - Manually controlled load manipulating devices; German version EN 14238:2004
|
| DIN EN 14439-2007
| 起重機.安全.塔式起重機
| Cranes - Safety - Tower cranes; English version of DIN EN 14439:2007-03
|
| DIN EN 14492-1-2007
| 起重機.電力驅動絞車和提升設備.第1部分:電力驅動絞車
| Cranes - Power driven winches and hoists - Part 1: Power driven winches; English version of DIN EN 14492-1:2007-02
|
| DIN EN 14492-2-2007
| 起重機.電動鏈?zhǔn)教嵘龣C(jī).第2部分:電動吊車
| Cranes - Power driven winches and hoists - Part 2: Power driven hoists; English version of DIN EN 14492-2:2007-04
|
| DIN EN 14502-1-2006
| 起重機.載人用升降設備.第1部分:吊藍
| Cranes - Equipment for lifting persons - Part 1: Suspended baskets (includes Corrigendum AC:2005) English version of DIN EN 14502-1:2006-05
|
| DIN EN 14502-2-2005
| 起重機.載人用提升設備.第2部分:升降控制臺
| Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations; German version EN 14502-2:2005
|
| DIN EN 1494-2001
| 可移動的起重機和相關提升設備
| Mobile or movable jacks and associated lifting equipment; German version EN 1494:2000
|
| DIN EN 14985-2007
| 起重機.回轉式動臂起重機
| Cranes - Slewing jib cranes; German version EN 14985:2007
|
| DIN EN 1991-3-2007
| 歐洲法規1:結構作用.第3部分:起重機和機械感應作用
| Eurocode 1: Actions on structures - Part 3: Actions induced by cranes and machinery; English version of DIN EN 1991-3:2007-03
|
| DIN EN 1993-6-2007
| 歐洲法規3:鋼結構的設計.第6部分:起重機支撐結構
| Eurocode 3: Design of steel structures - Part 6: Crane supporting structures; German version EN 1993-6:2007
|
| DIN EN 45510-6-8-2000
| 發電廠設備采購指南.第6-8部分:渦輪機輔助設備和起重機
| Guide for procurement of power station equipment - Part 6-8: Turbine auxiliaries; cranes; German version EN 45510-6-8:1999
|
| DIN EN 60204-32-1999
| 機械的安全性.機器的電氣設備.第32部分:起重機械的要求
| Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines (IEC 60204-32:1998); German version EN 60204-32:1998
|
| DIN EN 818-1-1996
| 起重用短鏈鎖.安全性.第1部分:一般驗收條件
| Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance; German version EN 818-1:1996
|
| DIN EN 818-2-1996
| 起重用短環圓鋼鏈條.安全性.第2部分:8級止檔鏈中級公差圓鋼鏈條
| Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings, grade 8; German version EN 818-2:1996
|
| DIN EN 818-3-1999
| 起重用短環節鏈.安全性.第3部分:鏈?zhǔn)降跛饔玫闹屑?jí)公差的圓鋼鏈.質量等級4
| Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings; grade 4; German version EN 818-3:1999
|
| DIN EN 818-4-1996
| 起重用短環圓鋼鏈條.安全性.第4部分:8級止檔鏈
| Short link chain for lifting purposes - Safety - Part 4: Chain slings, grade 8; German version EN 818-4:1996
|
| DIN EN 818-5-1999
| 起重用短環節鏈.安全性.第5部分:鏈?zhǔn)降醅嵥?質量等級4
| Short link chain for lifting purposes - Safety - Part 5: Chain slings; grade 4; German version EN 818-5:1999
|
| DIN EN 818-6-2000
| 起重用短環節鏈.安全性.第6部分:鏈?zhǔn)降跛?生產商提供的用于使用和維修的信息規范
| Short link chain for lifting purposes - Safety - Part 6: Chain slings; specification for information for use and maintenance to be provided by the manufacturer; German version EN 818-6:2000
|
| DIN EN ISO 13535-2002
| 石油工業和天然氣工業.鉆井和生產設備.起重機設備 (ISO 13535:2000); 德文版本 EN ISO 13535:2000 (德文和
| Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000); German version EN ISO 13535:2000 (German and English texts)
|
| DIN ISO 6045-1988
| 造船和海上結構.懸臂起重機鵝頸形起重桿的軸承.組件和部件
| Shipbuilding and marine structures; bearings for derrick goosenecks; assemblies and components; identical with ISO 6045, edition 1987
|
| DIN-Fachbericht 126-2002
| 國家應用文獻(NAD).DIN V ENV 1993-6的應用準則.歐洲法規3:第6部分:起重機軌道
| ()
|
| 編號 | 中文名稱 | 英文名稱 |
|---|