| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI/ASME B30.1-2004 | 千斤頂 | Jacks |
| ASTM C 1196-2004 | 用液壓千斤頂現場測量實心砌塊抗壓應力的標準試驗方法 | Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements |
| ASTM C 1197-2004 | 用液壓千斤頂法現場測量磚石建筑可變形性的標準試驗方法 | Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method |
| ASTM D 4729-2004 | 使用扁千斤頂法現場測定變形的應力和模數的標準試驗方法 | Standard Test Method for In Situ Stress and Modulus of Deformation Using the Flatjack Method |
| BS 2C 12-1980 | 航空用千斤頂?shù)装逡?guī)范 | Specification for jacking pads for aircraft |
| BS 2M 50-1986 | 航空用三角架千斤頂間隙尺寸規范 | Specification for clearance dimensions for tripod jacks for aircraft |
| BS EN 12312-19-2005 | 飛行器地面支持設備.特殊要求.飛行器千斤頂、軸式千斤頂和液壓機尾托架 | Aircraft ground support equipment - Specific requirements - Aircraft jacks, axle jacks, and hydraulic tail stanchions |
| BS EN 1494-2001 | 移動千斤頂和相關提升設備 | Mobile or movable jacks and associated lifting equipment |
| DIN 7355-1970 | 系列提升設備，起重器 | Serial lifting equipment, jacks |
| DIN ISO 43-1981 | 航空航天.飛機.千斤頂支板 | Aerospace; aircraft; jacking pads |
| EN 1494-2000 | 移動或可活動的千斤頂及有關升降設備 | Mobile or movable jacks and associated lifting equipment |
| GB/T 20340-2006 | 農業機械 農業掛車和被牽引設備 牽引桿千斤頂 | Agricultural machinery - Agricultural trailers and trailed equipment - Drawbar jacks |
| ISO 11530-1993 | 道路車輛 液壓千斤頂 規范 | Road vehicles; hydraulic jacks; specifications |
| ISO 12140-1998 | 農業機械 農用掛車和被牽引設備牽引桿千斤頂 | Agricultural machinery - Agricultural trailers and trailed equipment - Drawbar jacks |
| ISO 1464-1985 | 航空航天 三腳千斤頂 間隙尺寸 | Aerospace; Tripod jacks; Clearance dimensions |
| ISO 43-1976 | 航空器千斤頂基座 | Aircraft jacking pads |
| ISO 8720-1991 | 乘用車 機械式千斤頂規范 | Passengers cars; specifications for mechanical jacks |
| JB/T 10687-2006 | 永磁起重器 | Permanent Magnetic Lifter |
| JB/T 2104-2002 | 油壓千斤頂 | () |
| JB/T 2592-2008 | 螺旋千斤頂 | () |
| JB/T 3411.58-1999 | 千斤頂 尺寸 | () |
| JB/T 3411.59-1999 | 活頭千斤頂 尺寸 | () |
| JB/T 5315-2008 | 車庫用油壓千斤頂 | () |
| JIS D8101-1994 | 汽車用便攜式液壓千斤頂 自動車用油圧式攜行ジャッキ | Portable hydraulic jacks for automobiles |
| JIS D8101 AMD 1-2006 | 汽車用便攜式液壓千斤頂（修改件1） 自動車用油圧式攜行ジャッキ（追補１） | Portable hydraulic jacks for automobiles (Amendment 1) |
| JIS D8102-1994 | 汽車用液壓千斤頂 自動車用油圧式ガレージジャッキ | Hydraulic garage jacks for automobiles |
| JIS D8103-1994 | 汽車用便攜式螺旋千斤頂 自動車用ねじ式攜行ジャッキ | Portable screw jacks for automobiles |
| JIS D8103 AMD 1-2006 | 汽車用便攜式螺旋千斤頂（修改件1） 自動車用ねじ式攜行ジャッキ（追補１） | Portable screw jacks for automobiles (Amendment 1) |
| JIS W3901-1991 | 飛行器.千斤頂立架 航空機 ― ジャッキ受 | Aircraft -- Jacking pads |
| JIS W3902-1991 | 航空航天.三腳千斤頂.間隙尺寸 航空宇宙 ― 三腳ジャッキ ― すきま寸法 | Aerospace -- Tripod jacks -- Clearance dimensions |
| MT/T 985-2006 | 煤礦用立柱、千斤頂聚氨酯密封圈技術條件 | () |
| NF A82-150-1987 | 電阻焊接多點焊接機用無外殼千斤頂.一般規范 | (Electric resistance welding. Pneumatic cylinders without liners for multiple spot welding machines. General specifications.) |
| NF A82-160-1987 | 電阻焊接.多點焊接機用無外殼千斤頂.尺寸 | (Electric resistance welding. Pneumatic cylinders without liners for multiple spot welding machines. Sizes.) |
| NF E25-133-1987 | 緊固件.螺桿千斤頂用的金屬螺釘.短六角頭長制動端螺釘.Ａ和Ｂ級.符號ＨＺ | (Fasteners. Screws for screw-jacks. Small hexagon head screws with long dog point. Product grades A and B. Symbol HZ.) |
| NF E25-134-1987 | 緊固件.螺桿千斤頂用的金屬螺釘.短方頭短制動端螺釘.Ａ和Ｂ級.符號ＱＺ | (Fasteners. Screws for screw-jacks. Small square head screws with short dog point. Product grades A and B. Symbol QZ.) |
| NF E48-010-1984 | 液壓傳動.千斤頂.塞桿端部用內螺紋普通定位銷和支座 | (Hydraulic fluid power. Cylinder. Fork yoke and tenon for extremity of piston rod.) |
| NF E48-025-1987 | 液壓傳動.250巴千斤頂.單桿.內徑50到500mm.標牌和互換性尺寸 | (Hydraulic fluid power. 250 bar single-rod cylinders. Bore from 50 to 500 mm.) |
| NF E48-036-1984 | 液壓傳動.千斤頂.鑄鐵活塞環和活塞室公差和尺寸 | (HYDRAULIC FLUID POWER. CYLINDER. DIMENSIONS AND TOLERANCES OF CAST IRON PISTON RINGS AND OF THEIR HOUSINGS.) |
| NF E48-039-1987 | 液壓傳動.千斤頂.活塞導向環密封墊圈連接槽.尺寸 | (Hydraulic fluid power. Cylinders. Seal-incorporating bearing ring housing for pistons. Dimensions.) |
| NF E48-059-1991 | 液壓和氣壓傳動.起重器.活塞沖程的基本序列 | (Fluid power systems and components. Cylinders. Basic series of piston strokes.) |
| NF E48-060-1992 | 液壓和氣壓傳動.千斤頂.活塞桿的端頭.螺紋:尺寸和類型 | (Fluid power. Cylinders. Piston rod thread dimensions and types.) |
| NF E48-503-1987 | 液壓傳動.千斤頂.160bar小型A千斤頂活塞桿端頭的球頭銷定 | (HYDRAULIC FLUID POWER. CYLINDER. ROD END SPHERICAL EYE FOR 160 BAR SINGLE-ROD CYLINDER,COMPACT SERIE A.) |
| NF E49-030-1992 | 氣壓傳動.單桿起重器.10bar系列(1000kPa).孔徑為8-25mm.安裝尺寸 | (Pneumatic fluid power. Single rod cylinders 10 bar (1000 kpa) series. Bores from 8 to 25 mm. Mounting dimensions.) |
| NF E52-051-1977 | 起重和裝卸.齒條式千斤頂.名細表 | (LIFTING AND HANDLING. RACK JACKS. NOMENCLATURE.) |
| NF E52-205-1990 | 起重配附件.C型起重器件.性能 和試驗 | (LIFTING ACCESSORIES. C-SHAPED LIFTING DEVICES. CHARACTERISTICS AND TESTS.) |
| NF F76-028-1974 | 鐵路固定設備.手搖起軌千斤頂.特性 | (FIXED RAILWAY INSTALLATIONS. TRACK SERVICE AND MAINTENANCE TOOLS. RAIL LIFTING JACKS WITH CRANK. CHARACTERISTICS.) |
| NF F76-029-1977 | 鐵路固定設備.５噸力帶扛桿起軌千斤頂.性能 | (FIXED RAILWAY INSTALLATIONS. TRACK SERVICE AND MAINTENANCE TOOLS. LEVER-OPERATED 50 KN TRACK LIFTING JACKS. CHARACTERISTICS.) |
| NF L92-309-1988 | 航空.三腳架千斤頂.外廊尺寸 | (AEROSPACE. TRIPOD JACKS. CLEARANCE DIMENSIONS.) |
| NF L92-310-1977 | 液壓千斤頂?shù)闹c(diǎn) | (JACKING PADS.) |
| NF L92-313-1978 | 由千斤頂提升飛機用的活動球頭鉸鏈.ＩＳＯ米制螺紋剖面和BNAE公差 | (REMOVABLE AIRCRAFT JACKING PADS WITH METRIC ISO THREAD PROFILE AND BNAE TOLERANCES. (RECH.).) |
| NF L92-318-1978 | 由千斤頂飛機提升用活動球頭關節.ＩＳＯ米制螺紋剖面和公差 | (REMOVABLE AIRCRAFT JACKING PADS WITH METRIC ISO THREAD PROFILE AND TOLERANCES.) |
| NF R63-105-2001 | 移動式千斤頂和相關升降設備 | (Mobile or movable jacks and associated lifting equipment.) |
| QC/T 585-1999(2005) | 轎車機械式千斤頂技術條件 | () |
| prEN 12312-19-1999 | 航空地面輔助設備 特殊要求 第19部分：飛機起重器、軸式起重器和液壓尾柱 | Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions |
| 編號 | 中文名稱 | 英文名稱 |