| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI IT4.177-1983 | 攝影(化學制品).硫氰酸鈉晶體和溶液(50%).ANSI PH4.177-1983(R1987)的重申和重新設計 | Photography (Chemicals) - Sodium Thiocyanate Crystals and Solution (50%) Reaffirmation and Redesignation of ANSI PH4.177-1983(R1987) |
| ANSI IT4.304-2002 | 攝影.照相化學藥品.十水氰亞鐵酸鈉 | Photography - Processing Chemicals - Specifications for Sodium Ferrocyanide Decahydrate |
| ANSI IT4.41-1999 | 攝影(沖洗).游離氰化物的測定(ANSI/PIMA IT4.41-1999).ANSI PH4.41-1990的修改件和重新設計.ANSI/ISO 6703/ | Photography (Processing) - Effluents - Determination of Free Cyanide ANSI/PIMA IT4.41-1999; Revision and Redesignation of ANSI PH4.41-1990, ANSI/ISO 6703/4-1985 |
| ANSI IT4.43-1998 | 攝影(沖洗).廢液.總氰化物的測定(ANSI/PIMA IT4.43-1998) | Photography (Processing) - Effluents - Determination of Total Cyanide ANSI/PIMA IT4.43-1998 |
| ANSI PH4.177-1983 | 攝影用化學藥品.硫氰酸鈉晶體和硫氰酸鈉溶液 | Photography (Chemicals) - Sodium Thiocyanate Crystals and Sodium Thiocyanate Solution (50%) |
| ANSI PH4.304-1987 | 攝影用化學藥品.十水亞鐵氰化鈉 | Photography (Chemicals)-Sodium Ferrocyanide, Decahydrate |
| ANSI PH4.38-1983 | 攝影(處理).廢水.鐵-和鐵氰化物化學分析 | Photography (Processing)-Effluents-Chemical Analysis for Ferro- and Ferricyanide |
| ANSI PH4.41-1990 | 攝影.廢物處理.pH值為6的自由氰化物分析 | Photography - Processing Waste - Analysis for Free Cyanide at pH6 |
| ANSI/ASTM D1786-2001 | 甲苯二異氰酸鹽規范 | Toluenedisocyanate, Specifications for (08.02) |
| ANSI/ASTM D4203-2000 | 苯乙烯丙烯氰注射和擠壓材料規范 | Specification for Styrene Acrylonitrile (SAN) Injection and Extrusion Materials (08.02) |
| ANSI/ASTM D4659-1998 | 聚氨酯原材料試驗方法.異氰酸酯比重的測定 | Polyurethane-Isocyanate Raw Materials, Determination of Specific Gravity, Method for Testing (11.01) |
| ANSI/ASTM D4661-1998 | 聚氨酯原材料試驗方法.異氰酸酯中氯化物總含量的測定 | Polyurethane-Isocyanate Raw Materials, Determination of Total Chlorine, Method for Testing (08.03) |
| ANSI/ASTM D4663-1998 | 聚氨酯異氰酸鹽原料試驗方法.水解氯的測定(08.03) | Polyurethane-Isocyanate Raw Materials, Determination of Hydrolyzable Chlorine, Method for Testing (08.03) |
| ANSI/ASTM D4667-1987 | 測定聚氨酯異氰酸鹽原料酸性的方法 | Polyurethane-Isocyanate Raw Materials, Determination of Acidity, Method for Testing (08.03) |
| ANSI/ASTM D4876-1998 | 聚氨酯原料試驗方法:原油或改性的異氰酸酯酸度的測定(08.03) | Method for Testing Polyurethane Raw Materials: Determination of Acidity of Crude or Modified Isocyanates (08.03) |
| ANSI/ASTM D4877-1998 | 聚氨酯原料測試方法:測定異氰酸酯顏色 | Test Method for Polyurethane Raw Materials: Determination of Color in Isocyanates (08.03) |
| ANSI/ASTM D4889-1998 | 聚氨酯原料測試方法:原油或改性的異氰酸酯粘度的測定(08.03) | Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates (08.03) |
| ANSI/ASTM D5155-2001 | 聚氨酯原料試驗方法:芳香類異氰酸鹽中異氰酸含量的測定 | Test Method for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates (08.03) |
| ANSI/ASTM D5523-1994 | 聚氨基甲酸乙酯原料試驗方法：測定單體、芳香異氰酸酯中的可水解氯的銀鹽定量測定酸度 | Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates |
| ANSI/ASTM D5629-1999 | 聚氨基甲酸乙酯原材料試驗方法:低酸性芳族異氰酸鹽酯和聚氨基甲酸乙酯預聚物酸度的測定 | Test Method for Polyurethane Raw Materials: Determination of Acidity in Low Acidity Aromatic Isocyanates and Polyurethane Prepolymers (08.03) |
| ANSI/ASTM D704-1999 | 三氯氰胺甲醛模制化合物規范(08.01) | Specifications for Melamine-Formaldehyde Molding Compounds (08.01) |
| ANSI/I3A IT4.177-1983 | 攝影(藥液).硫氰酸鈉 | Photography (Chemicals) – Sodium Thiocyanate |
| ANSI/I3A IT4.304-2002 | 攝影(化合物).亞鐵氰化鈉.十水合物 | Photography (Chemicals) – Sodium Ferrocyanide, Decahydrate |
| ANSI/I3A IT4.41-1999 | 攝影(沖洗加工).pH6游離氰化物分析 | Photography (Processing) - Effluents - Determination of Free Cyanide |
| ANSI/I3A IT4.43-1998 | 攝影(沖洗加工).廢液.測定總氰化物 | Photography (Processing) - Effluents - Determination of Total Cyanide |
| ANSI/NAPM IT4.177-1983 | 攝影(藥液).硫氰酸鈉晶體和硫氰酸鈉溶液(50%) | Photography (Chemicals) - Sodium Thiocyanate Crystals and Sodium Thiocyanate Solution (50%) |
| ASTM C1289-2010 | 貼面硬質蜂窩聚異氰尿酸酯隔熱板標準規范 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM D1579-2001(2008) | 苯酚間苯二酚和三聚氰胺膠粘劑中填料含量的標準試驗方法 | Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives |
| ASTM D1582-1998(2004) | 液相苯酚、間苯二酚和三聚氰胺膠粘劑中不揮發物含量的測試方法 | Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives |
| ASTM D1786-2010 | 甲苯二異氰酸酯標準規范 | Standard Specification for Toluene Diisocyanate |
| ASTM D2036-2009 | 水中氰化物標準試驗方法 | Standard Test Methods for Cyanides in Water |
| ASTM D2572-1997(2003)e1 | 氨基甲酸乙酯材料或預聚物中異氰酸酯基團的試驗方法 | Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers |
| ASTM D4165-2006 | 水中氯化氰含量的標準試驗方法 | Standard Test Method for Cyanogen Chloride in Water |
| ASTM D4193-2008 | 水中硫氰酸鹽含量的標準試驗方法 | Standard Test Method for Thiocyanate in Water |
| ASTM D4282-2002 | 用微擴散法測定水和污水中游離氰化物的標準試驗方法 | Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion |
| ASTM D4374-2006 | 水中氰化物測定的標準試驗方法.總氰化物、弱酸分解氰化物和硫氰化物自動測定法 | Standard Test Methods for Cyanides in Water-Automated Methods for Total Cyanide, Weak Acid Dissociable Cyanide, and Thiocyanate |
| ASTM D4659-2009 | 聚氨酯原材料的試驗方法:異氰酸酯比重的標準試驗方法 | Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates |
| ASTM D4660-2006 | 聚氨酯原料的標準試驗方法:甲苯二異氰酸酯中同分異構體含量的測定 | Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate |
| ASTM D4661-2009 | 聚氨酯原材料的標準試驗方法:異氰酸酯中總氯化物含量的標準試驗方法 | Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates |
| ASTM D4663-2010 | 聚亞胺酯原材料法測定異氰酸酯中可水解氯含量的標準試驗方法 | Standard Test Method for Polyurethane Raw Materials Determination of Hydrolyzable Chlorine of Isocyanates |
| ASTM D4877-2010 | 聚亞胺酯原材料的標準試驗方法:異氰酸酯的APHA色度的測定 | Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates |
| ASTM D4889-2004 | 聚氨基甲酸乙酯原材料的標準試驗方法:天然異氰酸酯或改性異氰酸酯的粘度測定 | Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates |
| ASTM D5155-2010 | 芳香異氰酸酯中的異氰酸酯含量的聚亞胺酯原材料方測定的標準試驗方法 | Standard Test Methods for Polyurethane Raw Materials Determination of the Isocyanate Content of Aromatic Isocyanates |
| ASTM D5523-2010 | 單體芳香異氰酸酯中水解氯銀量滴定法測定聚氨酯原料酸度的標準試驗方法 | Standard Test Method for Polyurethane Raw Materials Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates |
| ASTM D5606-2009 | 甲苯二氰酸鹽(TDI)原料用甲苯的標準規范 | Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock |
| ASTM D5629-2005 | 聚氨基甲酸乙酯原料的標準試驗方法:低酸度芳香異氰酸酯和聚氨基甲酸乙酯預聚物中酸度的測定 | Standard Test Method for Polyurethane Raw Materials Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers |
| ASTM D5836-2008 | 測定工作場所大氣中2,4-二異氰酸甲苯(2,4-TDI)和2,6-二異氰酸甲苯(2,6-TDI)的標準試驗方法 | Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method) |
| ASTM D6099-2008 | 聚氨酯原材料的標準試驗方法:中酸度至高酸度芳香異氰酸酯酸度的測定 | Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates |
| ASTM D6696-2010 | 理解氰化物類型的標準指南 | Standard Guide for Understanding Cyanide Species |
| ASTM D6865-2004 | 丙烯氰-苯乙烯-丙烯酸鹽和丙烯氰-EPDM-苯乙烯塑料和合金模制和擠壓材料的標準分類系統 | Standard Classification System for Acrylonitrile-Styrene-Acrylate (ASA) and Acrylonitrile-EPDM-Styrene (AES) Plastics and Alloys Molding and Extrusion Materials |
| ASTM D6888-2009 | 用氣體擴散分離和電流計探測法對有效氰化物進行配位位移和流量注入分析的標準試驗方法 | Standard Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection |
| ASTM D704-1999(2004) | 三聚氰胺甲醛模制化合物的標準規范 | Standard Specification for Melamine-Formaldehyde Molding Compounds |
| ASTM D7237-2010 | 用氣體擴散分離和電流計探測法對游離氰化物進行流量注入分析(FIA)的標準試驗方法 | Standard Test Method for Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection |
| ASTM D7252-2006 | 聚氨酯原材料的標準試驗方法:測定異氰酸酯中單體和甲酚含量 | Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates |
| ASTM D7284-2008 | 利用氣體擴散分離和安培檢測法對微蒸餾后水樣中總氰化物的流量注入分析(FIA)的標準試驗方法 | Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection |
| ASTM D7295-2006 | 在燃料滲出液和固定排放源中氰化物取樣和測定的標準實施規程 | Standard Practice for Sampling and Determination of Hydrogen Cyanide (HCN) in Combustion Effluents and Other Stationary Sources |
| ASTM D7365-2009a | 氰化物分析用水樣的取樣、保存與降低干擾的規程 | Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide |
| ASTM D7511-2009e2 | 用間隔流動注射分析、在線紫外消解和安培檢測總氰化物含量的標準試驗方法 | Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection |
| ASTM D7572-2009 | 工藝過程修整發布后從礦山巖和土壤中提取氰化物的回收標準指南 | Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil After Remediation of Process Releases |
| ASTM E1600-2007 | 用原子吸收光譜法測定氰化物溶液中金的標準試驗方法 | Standard Test Method for Determination of Gold in Cyanide Solutions by Atomic Absorption Spectrometry |
| ASTM E1899-2008 | 利用與P-甲苯磺酰異氰酸鹽(TSI)的反應和氫氧化四丁基銨的電勢滴定法的羥基標準試驗方法 | Standard Test Method for Hydroxyl Groups Using Reaction with p-Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide |
| ASTM UOP682-1984 | 用可見分光光度測定法測定精煉廠水中總氰化物 | Total Cyanide in Refinery Waters by Visible Spectrophotometry |
| 編號 | 中文名稱 | 英文名稱 |