| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 14680-2007 | 手動電纜盤.交流電、三相交流電和直流電 | Hand-operated cable reels - A.C., three-phase A.C. and D.C. |
| DIN 17405-1979 | 直流繼電器的軟磁體材料.交付技術狀態 | Soft Magnetic Materials for Direct Current Relays; Technical Conditions of Delivery |
| DIN 4000-56-1987 | 交流1000V以下和直流1200V以下的開關和開關裝置用產品特性圖表 | Tabular layouts of article characteristics for switches and switching devices up to AC 1000 V and DC 1200 V |
| DIN 40030-1993 | 通過受控的靜態電力轉換器從交流供電系統直接向直流電動機輸送的額定電壓 | Rated voltages of DC-motors directly fed by controlled static power convertors from AC-power systems |
| DIN 41747-1-1976 | 穩壓電源.直流輸出電源的測量方法 | Stabilized power supplies; measuring methods, power supplies with d.e. output |
| DIN 41755-1-1970 | 直流電壓脈動的名稱、周期性偏差.術語和測量方法 | Denomination of the ripple of d.c voltage, periodic deviations; terms and measuring methods |
| DIN 41756-2-1973 | 靜態功率變流器.第2部分:直流負載型功率變流器能率 | Static power convertors; duty of power convertors, typers of d.c. load |
| DIN 43167-1-1987 | 工作電壓為交流1000V以下、直流1500V以下架空線用棒式絕緣子.組裝 | Rod-type insulator for overhead contact lines for operating voltages up to 1000 V a.c. and 1500 V d.c.; assembly |
| DIN 43167-2-1987 | 工作電壓為交流1000V以下、直流1500V以下架空接觸線用棒式絕緣子.帽、U型螺栓和鉤頭螺栓 | Rod-type insulator for overhead contact lines for operating voltages up to 1000 V a.c. and 1500 V d.c.; caps, u-bolts and hook bolt |
| DIN 43167-3-1987 | 工作電壓交流1000V以下.直流1500V以下架空接觸線用棒絕緣子.絕緣體 | Rod-type insulator for overhead contact lines for operating voltages up to 1000 V a.c. and 1500 V d.c; insulator |
| DIN 43188-1980 | 交流1000V/直流1500V架空線設備用絕緣子.安裝尺 | Insulators for overhead equipment, 1000 V a.c./1500 V d.c.; mounting dimensions |
| DIN 43235-1975 | 電力牽引.直流電路中過電壓抑制器 | Electric traction; overvoltage suppressors in d.c. circuits |
| DIN 43620-1-1984 | 帶刀口式觸點的低壓高遮斷容量熔斷器.交流電壓500V和660V、直流電壓400V用的低壓高遮斷容量熔斷體 | Low-voltage high-rupturing-capacity fuses with blade contacts; LV HRC fuse links for 500 and 660 V a.c. and 440 V d.c. |
| DIN 43620-3-1984 | 帶刀口觸點的低壓高遮斷容量熔斷器.交流電壓500V和660V、直流電壓440V用低壓高遮斷容量熔斷體座 | Low-voltage high-rupturing-capacity fuses with blade contacts; LV HRC fuse bases for LV HRC fuse links for 500 and 660 V a.c. and 440 V d.c. |
| DIN 44122-1971 | 印制電路延壽用直流100至400V金屬化的聚對苯二甲酸乙二酯薄膜介質電容器. | Metallized polyethylene terephthalate film dielectric capacitors, 100 to 400 V d.c., for extended life for printed wiring |
| DIN 44126-1-1974 | 第1部分:應用等級為HSG的圓柱形絕緣印刷電路用直流電 160 至 630V 的聚苯乙烯薄膜介質電容器 | Polystyrene film dielectric capacitors, 160 and 630 V d.c., also for printed circuits, cylindric form, insulated, class of application HSG |
| DIN 45910-111-1985 | 電子元件質量評估協調體系.空白詳細規范.第111部分:固定式金屬化聚乙烯對苯二酸鹽薄膜介質直流電容器 | Harmonized system of quality assessment for electronic components; blank detail specification: fixed metallized polyethylene terephthalate film dielectric d.c. capacitors |
| DIN 45910-112-1991 | 電子元器件質量評定協調體系.詳細規范：環境類型55/100/21(CECC 30401-051)、一般用途等級、絕緣、印制電路 | Harmonized system of quality assessment for electronic components; detail specification: metallized polyethylene terephthalate film capacitors DC 63 to 630 V, general-purpose grade cylindrical shape, insulated, axial terminations including for printed circuits, climatic category 55/100/21 (CECC 30401-051) |
| DIN 45910-113-1991 | 電子元器件質量評定協調體系.詳細規范：環境類型55/100/21(CECC 30401-052)、 一般用途等級、絕緣、印制電 | Harmonized system of quality assessment for electronic components; detail specification: metallized polyethylene terephthalate film capacitors DC 50 to 1000 V, general-purpose grade, rectangular shape, insulated, radial terminations for printed circuits, climatic category 55/100/21 (CECC 30401-052) |
| DIN 45910-114-1991 | 電子元器件質量評定協調體系.詳細規范：環境類型 55/100/56 (CECC-30401-053) 、長壽命等級、圓柱形、絕緣 | Harmonized system of quality assessment for electronic components; detail specification: metallized polyethylene terephthalate film capacitors DC 63 to 630 V, long-life grade, cylindrical shape, insulated, axial terminations, including for printed circuits, climatic category 55/100/56 (CECC-30401-053) |
| DIN 45910-115-1991 | 電子元器件質量評定協調體系.詳細規范：環境類型55/100/56(CECC 30401-054) 、長壽命等級、絕緣、印制電路 | Harmonized system of quality assessment for electronic components; detail specification: metallized polyethylene terephthalate film capacitors DC 63 to 400 V, long life grade, rectangular shape, insulated, radial terminations for printed circuits, climatic category 55/100/56 (CECC 30401-054) |
| DIN 45910-127-1994 | 電子元器件質量評定協調體系.詳細規范：環境類型 40/085/56 (CECC 30301-037)、軸向引線、帶絕緣套管的圓柱 | Harmonized system of quality assessment for electronic components; detail specification: Polar aluminium electrolytic capacitors with non solid electrolyte, DC 40 to 100 V (suitable to V a.c. load without using a polarizing potential), general-purpose grade, cylindrical metal case with insulation sleeve, axial wire leads, climatic category 40/085/56 (CECC 30301-045) |
| DIN 46062-1970 | 直流電動機和交流滑環感應電動機的起動器 | Starter for d.c.-motors and a.c.-slip-ring induction motors |
| DIN 46284-1972 | 交流380V直流440V.2.5mm2平方以下導線的二極和三極插座式端子板(儀器端子) | Two- and three-pole socket terminal strips (appliance terminals) 380 V a.c. and 440 V d.c. for conductors up to 2,5 mm<(hoch)2> |
| DIN 46285-1972 | 交流380V直流440V.2.5MM2平方以下導線的一極至三極插座式端子板（燈具端子） | One to three-pole socket terminal strips (lighting fixture terminals) 380 V a.c. and 440 V d.c. for conductors up to 2,5 mm<(hoch)2> |
| DIN 46453-6-1986 | 繞組線.第6部分:電阻絲直流電阻溫度系數的試驗方法 | Winding wires; resistance wires, test method of the temperature coefficient of the direct current resistance |
| DIN 49100-1987 | 帶直流10A.250V、交流16A250V接地觸點和16A 250V 以下轉換開關的兩極插座引線的基座.安裝尺寸 | Base for two-pole socket-outlets with earthing contacts 10 A 250 V d.c., 16 A 250 V a.c. and switches up to 16 A 250 V; mounting dimensions |
| DIN 49406-1-1981 | 直流２５０Ｖ１０Ａ和交流２５０Ｖ１６Ａ II類電器用的兩極插頭.尺寸 | Two-pole plug for class II appliances 10 A, 250 V and 16 A, 250 V; dimensions |
| DIN 49406-2-1989 | 額定功率為直流10A.250V和交流16A.250V、 II類電器用防濺型二極插頭 | Two-pole plugs for class II appliances rated for 10 A 250 V d.c., 16 A 250 V a.c., splash-proof |
| DIN 49440-3-1989 | 額定功率為直流10A.250V和交流16A.250V、帶接地接觸點的二極插座.防濺型輕便二極插座 | Two-pole socket-outlets with earthing contact rated for 10 A 250 V d.c., 16 A 250 V a.c., portable splash-proof socket-outlets |
| DIN 49440-4-1989 | 額定接地功率為直流10A.250V和交流16A.250V的二極插座.輕便式插座用量規 | Two-pole socket-outlets with earthing rated for 10 A 250 V d.c., 16 A 250 V a.c.; gauges for portable socket-outlets |
| DIN 49440-5-1989 | 帶保護觸點直流10A.250V和交流16A.250V盒裝二極插座.尺寸 | Two-pole socket-outlets with earthing contact; 10 A 250 V d.c., 16 A 250 V a.c., for mounting in boxes; dimensions |
| DIN 49440-6-1989 | 帶保護觸點直流10A.250V和交流16A.250V的表面安裝和便攜式二極插座.尺寸 | Two-pole socket-outlets with earthing contact; 10 A 250 V d.c., 16 A 250 V a.c., for surface mounting and as portable type; dimensions |
| DIN 49441-2-1989 | 額定功率為直流10A.250V和交流16A.250V、帶接地接觸點防濺型二極插頭 | Two-pole plugs with earthing contact rated for 10 A 250 V d.c., 16 A 250 V a.c., splash-proof |
| DIN 49441-3-1989 | 額定功率為直流10A.250V和交流16A.250V、帶接地接觸點的二極插頭.檢查插頭外徑用量規.檢驗裝置 | Two-pole plugs with earthing contact rated for 10 A 250 V a.c., 16 A 250 V d.c.; gauges for checking the outside diameter of plugs; test apparatus |
| DIN 49442-1969 | 交直流２５０Ｖ.１０Ａ和直流２５０Ｖ.１０Ａ交流２５０Ｖ.１６Ａ帶接地觸點的輸出裝置的防水兩極插座.主要 | Two-pole watertight socket-outlets with earthing-contact, 10 A, 250 V and 10 A, 250 V, 16 A, 250 V; principal dimensions |
| DIN 49443-1987 | 帶接地保護觸點的防水的兩極插頭.直流10A 250 V，交流16A 250 V | Watertight two-pole plug with earthing contact; 10A 250 V d.c., 16A 250 V a.c. |
| DIN 49500-1980 | 旋入式 D-型 D11 熔斷器底座 6A - 25A 的交流 415 V 和直流 250 V 的微型斷路器 | Miniature circuit breakers, 6 to 25 A, 415 V a.c. and 250 V d.c., screw-in in D-type fuse-bases DII |
| DIN 51088-2007 | 陶瓷原料和基本材料的測試.用發射光譜測定分析和直流電弧中的激勵測定碳化硅粉末和顆粒碳化硅中金屬微量雜 | Testing of ceramic raw and basic materials - Determination of mass fractions of metallic trace impurities in silicon carbide powders and granular silicon carbides by optical emission spectrometry and excitation in the DC arc |
| DIN 65167-1988 | 航空航天.直流28V.5A.2和4極極化單穩態插入式繼電器 | Aerospace; plug-in relays; DC 28 V, two- and four pole, 5 Amp, polarized, monostable |
| DIN 65168-1988 | 航空航天.直流28V.10A.1和3極極化單穩態插入式繼電器 | Aerospace; plug-in relays; DC 28 V, one- and three pole, 10 Amp, polarized, monostable |
| DIN 89262-1996 | 帶保護觸點的兩極插座.直流10A、交流16A、交直流25V,保護類型IP56 | Double-pole sockets with earthing contact - DC 10 A, AC 16 A, AC/DC 250 V, degree of protection IP 56 |
| DIN 89266-1993 | 由IP56殼體提供保護度的直流10A,交流16A,250V帶接地觸點的兩極電纜耦合器 | Double-pole cable couplings with earthing contact, 10 A d.c., 16 A a.c., 250 V, degree of protection provided by enclosure IP 56 |
| DIN 89267-1993 | 由IP56殼體提供保護度的直流10A,交流16A,250V帶接地觸點的兩極插頭 | Double-pole plugs with earthing contact, 10 A d.c., 16 A a.c., 250 V, degree of protection provided by enclosure IP 56 |
| DIN 89320-1993 | 直流10A,交流16A,250V帶接地觸點的防水插頭插座裝置的雙極觸點插入件 | Double-pole contact inserts for watertight plug- and socket devices with earthing contact, 10 A d.c., 16 A a.c., 250 V |
| DIN CLC/TS 50457-1-2008 | 電動車輛的傳導充電.第1部分:直流充電站 | Conductive charging for electric vehicles - Part 1: D.C. charging station; German version CLC/TS 50457-1:2008 |
| DIN EN 130100-1998 | 分規范.直流電用固定式聚乙烯 － 對笨二酸鹽塑料薄膜介質金屬箔電容器 | Sectional specification: Fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current; German version EN 130100:1997 |
| DIN EN 130101-1998 | 空白詳細規范.直流電壓用的固定式聚對笨二甲酸乙二酯薄膜介質金屬箔電容器.E評定級 | Blank detail specification: Fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current - Assessment level E; German version EN 130101:1997 |
| DIN EN 130102-1998 | 空白詳細規范.聚乙烯－對苯二酸鹽膜電解金屬箔直流固定電容器.評定等級EZ | Blank detail specification: Fixed polyethylene-terephthalate film dielectric metal foil capacitors for direct current - Assessment level EZ; German version EN 130102:1997 |
| DIN EN 130502-1999 | 空白詳細規范.直流電壓的固定式金屬鍍層的聚碳酸酯薄膜介質電容器.EZ 評定等級 | Blank detail specification - Fixed metallized polycarbonate film dielectric capacitors for direct current - Assessment level EZ; German version EN 130502:1998 |
| DIN EN 131700-1998 | 分規范.帶金屬箔和聚碳酸脂膜介質電極的直流電用固定電容器 | Sectional specification: Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric; German version EN 131700:1997 |
| DIN EN 131701-1998 | 空白詳細規范.帶金屬箔電極和聚碳酸脂薄膜介質的固定式直流電容器 | Blank detail specification - Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric - Assessment level E; German version EN 131701:1997 |
| DIN EN 131702-1998 | 空白詳細規范.帶金屬箔電極和聚碳酸脂薄膜介質的固定式直流電容器.評定等級EZ | Blank detail specification - Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric - Assessment level EZ; German version EN 131702:1997 |
| DIN EN 131802-1998 | 空白詳細規范.固定式直流聚丙烯薄膜介質金屬箔電容器.評定等級EZ | Blank detail specification: Fixed polypropylen film dielectric metal foil d.c. capacitors - Assessment level EZ; German version EN 131802:1997 |
| DIN EN 1648-1-2005 | 休閑居住車.12V直流超低壓電氣裝置.第1部分:居住掛車 | Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 1: Caravans; German version EN 1648-1:2004 |
| DIN EN 1648-2-2005 | 休閑居住車.12V直流超低壓電氣裝置.第2部分:電動居住掛車 | Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 2: Motor caravans; German version EN 1648-2:2004 |
| DIN EN 2349-306-2007 | 航空航天系列.繼電器和電流接觸器的要求和試驗程序.第306部分:過載直流電和交流電 | Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.; German and English version EN 2349-306:2006 |
| DIN EN 300132-2-2007 | 環境工程.向電信設備輸入的電源接口.第2部分:直流(dc)操作 | Environmental Engineering (EE) - Power supply interface at the input to telecommunications equipment - Part 2: Operated by direct current (dc) (Endorsement of the English version EN 300132-2 V2.2.1 (2007-05) as German standard) |
| DIN EN 300132-3-2005 | 環境工程.向電信設備輸入的電源接口.第3部分:整流電流、交流或400V及以下直流操作 | Environmental Engineering (EE) - Power supply interface at the input to telecommunications equipment - Part 3: Operated by rectified current source, alternating current source or direct current source up to 400 V (Endorsement of the English version EN 300132-3 V1.2.1 (2003-08) as German standard) |
| DIN EN 50122-2-1999 | 鐵路應用.固定設備.第2部分:對于由直流牽引系統的造成的鐵路雜散電流影響所采取的保護措施 | Railway applications - Fixed installations - Part 2: Protective provisions against the effects of stray currents caused by d.c. traction systems; German version EN 50122-2:1998 |
| DIN EN 50122-2/A1-2003 | 鐵路設施.固定設備.第2部分:直流牽引系統雜散電流防護措施.修改件A1 | Railway applications - Fixed installation - Part 2: Protective provisions against the effects of stray currents caused by d.c. traction systems; Amendment 1; German version EN 50122-2:1998/A1:2002 |
| DIN EN 50123-1-2003 | 鐵路設施.固定設備.直流開關裝置.第1部分:總則 | Railway applications - Fixed installations; D.C. switchgear - Part 1: General; German version EN 50123-1:2003 |
| DIN EN 50123-2-2003 | 鐵路設施.固定裝置.直流開關裝置.第2部分:直流斷路器 | Railway applications - Fixed installations; D.C. switchgear - Part 2: D.C. circuit breakers; German version EN 50123-2:2003 |
| DIN EN 50123-3-2003 | 鐵路設施.固定裝置.直流開關設備.第3部分:室內用直流斷路器、隔離負荷開關和接地開關 | Railway applications - Fixed installations; D.C. switchgear - Part 3: Indoor d.c. disconnectors, switch-disconnectors and earthing switches; German version EN 50123-3:2003 |
| DIN EN 50123-4-2003 | 鐵路設施.固定設備.直流開關裝置.第4部分:室外直流隔離開關、隔離開關和接地開關 | Railway applications - Fixed installations; D.C. switchgear - Part 4: Outdoor d.c. switch-disconnectors, switch-disconnectors and earthing switches; German version EN 50123-4:2003 |
| DIN EN 50123-5-2003 | 鐵路設施.固定設備.直流開關裝置.第5部分:直流系統專用電涌放電器和低電壓限制器 | Railway applications - Fixed installations; D.C. switchgear - Part 5: Surge arresters and low-voltage limiters for specific use in d.c. systems; German version EN 50123-5:2003 |
| DIN EN 50123-6-2003 | 鐵路設施.固定設備.直流開關裝置.第6部分:直流開關裝置組件 | Railway applications - Fixed installations; D.C. switchgear - Part 6: D.C. switchgear assemblies; German version EN 50123-6:2003 |
| DIN EN 50123-7-1-2003 | 鐵路設施.固定設備.直流開關設備.第7-1部分:直流牽引系統專用測量、控制與保護裝置.應用指南 | Railway applications - Fixed installations; D.C. switchgear - Part 7-1: Measurement, control and protection devices for specific use in d.c. tractions systems; Applications guide; German version EN 50123-7-1:2003 |
| DIN EN 50123-7-2-2003 | 鐵路設施.固定設備.直流開關裝置.第7-2部分:直流牽引系統專用測量、控制和保護設備.獨立式電流傳感器和其它 | Railway applications - Fixed installations; D.C. switchgear - Part 7-2: Measurement, control and protection devices for specific use in d.c. traction systems; Isolating current transducers and other current measuring devices; German version EN 50123-7-2:2003 |
| DIN EN 50123-7-3-2003 | 鐵路設施.固定設備.直流開關裝置.第7-3部分:直流牽引系統專用測量、控制和保護設備.獨立式電壓傳感器和其他 | Railway applications - Fixed installations; D.C. switchgear - Part 7-3: Measurement, control and protection devices for specific use in d.c. traction systems; Isolating voltage transducers and other voltage measuring devices; German version EN 50123-7-3:2003 |
| DIN EN 50162-2005 | 直流系統中雜散電流引起腐蝕的防護 | Protection against corrosion by stray current from direct current systems; German version EN 50162:2004 |
| DIN EN 50289-1-2-2002 | 通信電纜.試驗方法規范.第1-2部分:電氣試驗方法.直流電阻 | Communication cables - Specifications for test methods - Part 1-2: Electrical test methods; DC resistance; German version EN 50289-1-2:2001 |
| DIN EN 50311-2004 | 鐵路設施.機車車輛.照明熒光燈用直流電子鎮流器 | Railway applications - Rolling stock - D.C. supplied electronic ballasts for lighting fluorescent lamps; German version EN 50311:2003 |
| DIN EN 60077-3-2003 | 鐵路設施.機車車輛電氣設備.第3部分:電工元件.直流斷路器規則 | Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components; Rules for d.c. circuit-breakers (IEC 60077-3:2001); German version EN 60077-3:2002 |
| DIN EN 60146-2-2001 | 半導體變流器.第2部分:包括直流變流器的自整流半導體變流器 | Semiconductor convertors - Part 2: Self-commutated semiconductor convertors including direct d.c. convertors (IEC 60146-2:1999); German version EN 60146-2:2000 |
| DIN EN 60243-2-2001 | 固體絕緣材料介電強度試驗方法.第2部分:用直流電壓測試的補充要求 | Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage (IEC 60243-2:2001); German version EN 60243-2:2001 |
| DIN EN 60247-2005 | 絕緣液體.相對電容率、電介質損耗因數(tanδ)和直流電阻率的測量 | Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity (IEC 60247:2004); German version EN 60247:2004 |
| DIN EN 60384-11-1-2008 | 電子設備用固定電容器.第11-1部分:空白詳細規范.金屬箔式聚乙烯-對苯二甲酸酯膜介質直流固定電容器.評定等 | Fixed capacitors for use in electronic equipment - Part 11-1: Blank detail specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors - Assessment level EZ (IEC 60384-11-1:2008); German version EN 60384-11-1:2008 |
| DIN EN 60384-11-2008 | 電子設備用固定電容器.第11部分:分規范.金屬箔式聚乙烯-對苯二甲酸酯膜介質直流固定電容器 | Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene terephthalate film dielectric metal foil d.c. capacitors (IEC 60384-11:2008); German version EN 60384-11:2008 |
| DIN EN 60384-13 Berichtigung 1-2008 | 電子設備用固定電容器.第13部分:分規范.金屬箔式聚丙烯介質直流固定電容器.技術勘誤DIN EN 60384-13-2006 | Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors (IEC 60384-13:2006); German version EN 60384-13:2006 Corrigendum to DIN EN 60384-13:2006-09; German version CENELEC-Cor. :2006 to EN 60384-13:2006 |
| DIN EN 60384-13-1 Berichtigung 1-2009 | 電子設備用固定電容器.第13-1部分:空白詳細規范.聚丙烯膜介質金屬箔直流固定電容器.評定級別 E(IEC 60384-1 | Fixed capacitors for use in electronic equipment - Part 13-1: Blank detail specification - Fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level E (IEC 60384-13-1:2006); German version EN 60384-13-1:2006, Corrigendum to DIN EN 60384-13-1:2006-09; German version CENELEC-Cor.:2009 to EN 60384-13-1:2009 |
| DIN EN 60384-13-1-2006 | 電子設備用固定電容器.第13-1部分:空白詳細規范.固定聚丙烯薄膜介電金屬箔直流電容器.評定等級E和EZ(IEC 60 | Fixed capacitors for use in electronic equipment - Part 13-1: Blank detail specification - Fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment levels E and EZ (IEC 60384-13-1:2006); German version EN 60384-13-1:2006 |
| DIN EN 60384-16-1-2006 | 電子設備用固定電容器.第16-1部分:空白詳細規范:金屬化聚丙烯薄膜介質直流固定電容器.評定等級E和EZ(IEC 60 | Fixed capacitors for use in electronic equipment - Part 16-1: Blank detail specification: Fixed metallized polypropylene film dielectric d.c. capacitors - Assessment levels E and EZ (IEC 60384-16-1:2005); German version EN 60384-16-1:2005 |
| DIN EN 60384-16-2006 | 電子設備用固定電容器.第16部分:分規范:金屬化聚丙烯薄膜介質直流固定電容器(IEC 60384-16:2005) | Fixed capacitors for use in electronic equipment - Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors (IEC 60384-16:2005); German version EN 60384-16:2005 |
| DIN EN 60384-17-1-2006 | 電子設備用固定電容器.第17-1部分:空白詳細規范:金屬化聚丙烯薄膜介質直流和脈沖電容器.評定等級E和EZ(IEC | Fixed capacitors for use in electronic equipment - Part 17-1: Blank detail specification - Fixed metallized polypropylene film dielectric a.c. and pulse capacitors - Assessment levels E and EZ (IEC 60384-17-1:2005); German version EN 60384-17-1:2005 |
| DIN EN 60384-17-2006 | 電子設備用固定電容器.第17部分:分規范:金屬化聚丙烯薄膜介質直流和脈沖電容器(IEC 60384-17:2005) | Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors (IEC 60384-17:2005); German version EN 60384-17:2005 |
| DIN EN 60384-19 Berichtigung 1-2008 | 電子設備用固定電容器.第19部分:分規范.金屬化聚對苯二甲酸乙二醇酯薄膜電介質表面安裝直流固定電容器.技術 | Fixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors (IEC 60384-19:2006); German version EN 60384-19:2006, Corrigendum to DIN EN 60384-19:2006-09; German version CENELEC-Cor. :2006 to EN 60384-19:2006 |
| DIN EN 60384-19-1 Berichtigung 1-2008 | 電子設備用固定電容器.第19-1部分:空白詳細規范.金屬化聚對苯二甲酸乙二醇酯薄膜電介質表面安裝直流固定電 | Fixed capacitors for use in electronic equipment - Part 19-1: Blank detail specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors - Assessment level EZ (IEC 60384-19-1:2006); German version EN 60384-19-1:2006, Corrigendum to DIN EN 60384-19-1:2006-09; German version CENELEC-Cor. :2006 to EN 60384-19-1:2006 |
| DIN EN 60384-2-1-2006 | 電子設備用固定電容器.第2-1部分:空白詳細規范:金屬化聚對苯二甲酸乙酯薄膜介質直流固定電容器.評定等級E和 | Fixed capacitors for use in electronic equipment - Part 2-1: Blank detail specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors - Assessment levels E and EZ (IEC 60384-2-1:2005); German version EN 60384-2-1:2005 |
| DIN EN 60384-2-2006 | 電子設備用固定電容器.第2部分:分規范:金屬化聚對苯二甲酸乙酯薄膜介質直流固定電容器(IEC 60384-2:2005) | Fixed capacitors for use in electronic equipment - Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors (IEC 60384-2:2005); German version EN 60384-2:2005 |
| DIN EN 60384-20-1-2008 | 電子設備用固定電容器.第20-1部分:空白詳細規范.固定式金屬化聚苯硫薄膜電介質表面安裝直流電容器.評定等級 | Fixed capacitors for use in electronic equipment - Part 20-1: Blank detail specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors - Assessment level EZ (IEC 60384-20-1:2008 + Corrigendum 2008); German version EN 60384-20-1:2008 |
| DIN EN 60384-20-2008 | 電子設備用固定電容器.第20部分:分規范.固定式金屬化聚苯硫薄膜電介質表面安裝直流電容器(IEC 60384-20-200 | Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors (IEC 60384-20:2008 + Corrigendum 2008); German version EN 60384-20:2008 |
| DIN EN 60384-23-1-2005 | 電子設備用固定電容器.第23-1部分:空白詳細規范.表面安裝的金屬化聚乙烯苯二甲酸鹽膜介質直流固定電容器.評 | Fixed capacitors for use in electronic equipment - Part 23-1: Blank detail specification - Fixed surface mount metallized polyethylene naphthalate film dielectric d.c. capacitors - Assessment level EZ (IEC 60384-23-1:2005); German version EN 60384-23-1:2005 |
| DIN EN 60384-23-2005 | 電子設備用固定電容器.第23部分:分規范.表面安裝的金屬化聚乙烯苯二甲酸鹽膜介質直流固定電容器 | Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric d.c. capacitors (IEC 60384-23:2005); German version EN 60384-23:2005 |
| DIN EN 60384-6-1-2006 | 電子設備用固定電容器 第6-1部分:空白詳細規范:金屬化聚碳酸酯膜介質直流固定電容器.評定水平E | Fixed capacitors for use in electronic equipment - Part 6-1: Blank detail specification - Fixed metallized polycarbonate film dielectric d.c. capacitors - Assessment level E (IEC 60384-6-1:2005); German version EN 60384-6-1:2005 |
| DIN EN 60384-6-2006 | 電子設備用固定電容器.第6部分:分規范.金屬化聚碳酸酯膜介質直流固定電容器 (IEC 60384-6-2005) | Fixed capacitors for use in electronic equipment - Part 6: Sectional specification - Fixed metallized polycarbonate film dielectric d.c. capacitors (IEC 60384-6:2005); German version EN 60384-6:2005 |
| DIN EN 60404-4-2009 | 磁性材料.第4部分:軟磁材料直流磁性能的測量方法(IEC 60404-4:1995 + A1:2000 + A2:2008),德文版本EN 60404 | Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials (IEC 60404-4:1995 + A1:2000 + A2:2008); German version EN 60404-4:1997 + A1:2002 + A2:2008 |
| DIN EN 60477-1999 | 實驗室直流電阻器 | Laboratory d.c. resistors (IEC 60477:1974 + A1:1997); German version EN 60477:1997 + A1:1997 |
| DIN EN 60523-1994 | 直流電位計 | Direct-current potentiometers (IEC 60523:1975 + A1:1979 + Corrigendum 1980); German version EN 60523:1993 |
| DIN EN 60523/A2-1999 | 直流電位計.修改件A2 (IEC 60523:1975/A2:1997); 德文版本 EN 60523:1993/A2:1997 | Direct-current potentiometers; Amendment A2 (IEC 60523:1975/A2:1997); German version EN 60523:1993/A2:1997 |
| DIN EN 60524-1994 | 直流電阻電壓比例箱 | Direct-current resistive volt ratio boxes (IEC 60524:1975 + A1:1981); German version EN 60524:1993 |
| DIN EN 60524/A2-1999 | 直流電位計.修改件A2 | Direct-current resistive volt ratio boxes; Amendment A2 (IEC 60524:1975/A2:1997); German version EN 60524:1993/A2:1997 |
| DIN EN 60564-1994 | 電阻測量用直流電橋 | D.C. bridges for measuring resistance (IEC 60564:1977 + A1:1981); German version EN 60564:1993 |
| DIN EN 60564/A2-1999 | 直流電阻測量橋.修改件A2 | D.C. bridges for measuring resistance; Amendment A2 (IEC 60564:1977/A2:1997); German version EN 60564:1993/A2:1997 |
| DIN EN 60633-2000 | 高壓直流(HVDC)傳輸術語 | Terminology for high-voltage direct current (HVDC) transmission (IEC 60633:1998); German version EN 60633:1999 |
| DIN EN 60700-1-2009 | 壓直流(HVDC)電力傳輸用可控硅閥.第1部分:電氣試驗(IEC 60700-1:1998 + A1:2003 + A2:2008),德文版本EN 607 | Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing (IEC 60700-1:1998 + A1:2003 + A2:2008); German version EN 60700-1:1998 + A1:2003 + A2:2008 |
| DIN EN 60811-5-1-2004 | 電纜和光纜用絕緣和護套材料.通用試驗方法.第5-1部分:填充復合物的專用方法.滴點.油分離.較低溫脆性.總酸值 | Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - D.C. resistivity at 23 °C and 100 °C (IEC 60811-5-1:1990, modified + A1:2003); German version EN 60811-5-1:1999 + A1:2004 |
| DIN EN 60895-2004 | 帶電作業.標稱交流電壓800kV及以下和直流電壓600kV及以下的導電衣著 | Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and ? 600 kV d.c. (IEC 60895:2002 + Corrigendum 2003, modified); German version EN 60895:2003 |
| DIN EN 60898-2-2007 | 家用和類似用途電器過流保護斷路器.第2部分:交流和直流操作的斷路器 | Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation (IEC 60898-2:2000 + A1:2003, modified); German version EN 60898-2:2006 |
| DIN EN 60900-2005 | 帶電作業.交流1000V和直流1500V及以下帶電作業用手持工具 | Live working - Hand tools for use up to 1000 V a.c. and 1500 V d.c. (IEC 60900:2004); German version EN 60900:2004 |
| DIN EN 60947-5-6-2000 | 低壓開關設備和控制設備.第5-6部分:控制電路器件和切換元件、 接近傳感器和切換放大器用直流連器件（NAMUR) | Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements, DC interface for proximity sensors and switching amplifiers (NAMUR) (IEC 60947-5-6:1999); German version EN 60947-5-6:2000 |
| DIN EN 61000-4-17-2005 | 電磁兼容性(EMC).第4-17部分:試驗和測量技術.直流輸入電力端口脈動抗擾性試驗 | Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test (IEC 61000-4-17:1999 + A1:2001); German version EN 61000-4-17:1999 + A1:2004 |
| DIN EN 61000-4-17/A2-2009 | 電磁兼容性(EMC).第4-17:測試和測量技術.直流輸入電源端口紋波免疫測試(IEC 61000-4-17:1999/A2:2008),德文 | Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test (IEC 61000-4-17:1999/A2:2008); German version EN 61000-4-17:1999/A2:2009 |
| DIN EN 61000-4-29-2001 | 電磁兼容性.第4-29部分:試驗和測量技術.直流輸入功率口抗擾試驗 電壓擾動、短時中斷和電壓振動 | Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests (IEC 61000-4-29:2000); German version EN 61000-4-29:2000 |
| DIN EN 61047-2005 | 鎢絲燈用直流或交流供電電子降壓轉換器.性能要求 | DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements (IEC 61047:2004); German version EN 61047:2004 |
| DIN EN 61076-2-1999 | 直流、低頻模擬和數字高速數據用連接器.第2部分:經質量評定的圓形連接器.分規范（IEC 61076-2-1999) | Connectors for use in d.c., low frequency analogue and in digital high speed data applications - Part 2: Circular connectors with assessed quality; sectional specification (IEC 61076-2:1998); German version EN 61076-2:1999 |
| DIN EN 61076-3-100-2000 | 直流低頻模擬和數字高速數據裝置連接器.第3100部分:經質量評定的矩形接插件. 梯形殼體1,27MM雙列非移動帶狀 | Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality; detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row (IEC 61076-3-100:1999); German version EN 61076-3-100:2000 |
| DIN EN 61076-3-101-1998 | 直流電壓低頻模擬和數字高速度數據應用中使用的經質量評定的連接器.第3部份:矩形插接器.第101節:一系列帶有 | Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors; Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 × 2,54 mm centre-line (IEC 61076-3-101:1997); German version EN 61076-3-101:1997 |
| DIN EN 61076-4-001-1997 | 直流電壓,低頻率模擬以及數字高速傳送數據用經質量評定的插接件.第4部分:印制電路板插接器.第001節:空白詳 | Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 4: Printed board connectors; section 001: Blank detail specification (IEC 61076-4-001:1996); German version EN 61076-4-001:1996 |
| DIN EN 61076-4-102-1997 | 直流低頻模擬及高速數據數字系統用經質量評定的連接器.第4部分:印制電路板聯接器.第102節:帶前定心,編碼和 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors; Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917 (IEC 61076-4-102:1997); German version EN 61076-4-102:1997 |
| DIN EN 61076-4-103-1999 | 直流電低頻率模擬及數字高速數據使用的連接器.第4-103部分:經質量評定的印制電路板連接器.帶屏蔽的 和 2,5m | Connectors for use in d.c. low frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality; detail specification for two-part connectors with shielding and a basic grid of 2,5 mm (IEC 61076-4-103:1999); German version EN 60176-4-103:1999 |
| DIN EN 61076-4-104-1999 | 直流低頻模擬和數字高速數據應用系統用連接器.第4-104部分:經質量評定的印制電路板連接器.基本網格為2.0mm | Connectors for use in d.c. low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality; detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm (IEC 61076-4-104:1999); German version EN 61076-4-104:1999 |
| DIN EN 61076-4-105-1999 | 經質量評定的直流低頻率模擬及數字高速數據應用系統用連接器.第4部分:印制板電路用連接器.第105節:供包括通 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry (IEC 61076-4-105:1995); German version EN 61076-4-105:1998 |
| DIN EN 61076-4-1996 | 直流低頻模擬及高速數據數字系統用經過質量評定的連接器.第4部分:總規范 | Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 4: Generic specification (IEC 61076-4:1995); German version EN 61076-4:1996 |
| DIN EN 61076-5-2002 | 直流低頻率模擬及高速數據數字設備連接器.第5部分:經質量評定的串聯插座.分規范 | Connectors for use in d.c., low frequency analogue and digital high-speed data applications - Part 5: In-line sockets with assessed quality; Sectional specification (IEC 61076-5:2001); German version EN 61076-5:2001 |
| DIN EN 61076-7-2001 | 直流、低頻模擬及高速數字?jǐn)?shù)據用連接器.第7部分:經質量評定(包括合格鑒定和性能認可)的電纜輸出附件.分規范 | Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualifications and capability approval; Sectional specification (IEC 61076-7:2000); German version EN 61076-7:2000 |
| DIN EN 61204-2001 | 直流輸出低壓供電裝置.性能特征 | Low-voltage power supply devices, d.c. output - Performance characteristics (IEC 61204:1993, modified + A1:2001); German version EN 61204:1995 + A1:2001 |
| DIN EN 61204-3-2001 | 直流輸出低壓供電裝置.第3部分:電磁兼容性(EMC) | Low-voltage power supplies DC output - Part 3: Electromagnetic compatibility (EMC) (IEC 61204-3:2000); German version EN 61204-3:2000 |
| DIN EN 61204-6-2001 | 直流輸出低壓供電裝置.第6部分:經過性能評定的低壓供電裝置要求 | Low-voltage power supplies, DC output - Part 6: Requirements for low-voltage power supplies of assessed performance (IEC 61204-6:2000); German version EN 61204-6:2001 |
| DIN EN 61204-7-2007 | 直流輸出低壓電源.第7部分:安全要求 | Low voltage power supplies, d.c. output - Part 7: Safety requirements (IEC 61204-7:2006); German version EN 61204-7:2006 |
| DIN EN 61325-1996 | 額定電壓1000V以上架空線絕緣子.直流系統陶瓷或玻璃絕緣子.定義、試驗方法和驗收準則 | Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria (IEC 61325:1995); German version EN 61325:1995 |
| DIN EN 61347-2-12-2006 | 燈的控制裝置.第2-12部分:放電燈(熒光燈除外)用直流或交流電子鎮流器的特殊要求(IEC 61347-2-12-2005).德文 | Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) (IEC 61347-2-12:2005); German version EN 61347-2-12:2005 |
| DIN EN 61347-2-13-2007 | 燈控裝置.第2-13部分:發光二極管交直流供電控制設備的特殊要求 | Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules (IEC 61347-2-13:2006); German version EN 61347-2-13:2006 |
| DIN EN 61347-2-2-2007 | 燈控裝置.第2-2部分:白熾燈用交、直流電子壓降轉換器的特殊要求 | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps (IEC 61347-2-2:2000 + A1:2005 + A2:2006); German version EN 61347-2-2:2001 + Corrigendum July 2003 + A1:2006 + A2:2006 + Corrigendum November 2006 |
| DIN EN 61347-2-4-2001 | 燈具控制裝置.第2-4部分:普通照明用直流電子鎮流器的特殊要求 | Lamp controlgear - Part 2-4: Particular requirements for d.c. supplied electronic ballasts for general lighting (IEC 61347-2-4:2000); German version EN 61347-2-4:2001 |
| DIN EN 61347-2-5-2001 | 燈具控制裝置.第2-5部分:公交照明用直流電子鎮流器的特殊要求 | Lamp controlgear - Part 2-5: Particular requirements for d.c. supplied electronic ballasts for public transport lighting (IEC 61347-2-5:2000); German version EN 61347-2-5:2001 |
| DIN EN 61347-2-6-2001 | 燈具控制裝置.第2-6部分:飛行器照明用直流電子鎮流器的特殊要求 | Lamp controlgear - Part 2-6: Particular requirements for d.c. supplied electronic ballasts for aircraft lighting (IEC 61347-2-6:2000); German version EN 61347-2-6:2001 |
| DIN EN 61347-2-7-2007 | 燈的控制裝置.第2-7部分:應急照明用直流電子鎮流器的特殊要求 | Lamp controlgear - Part 2-7: Particular requirements for d.c. supplied electronic ballasts for emergency lighting (IEC 61347-2-7:2006); German version EN 61347-2-7:2006 |
| DIN EN 61377-2-2003 | 鐵路設施.機車車輛.聯合試驗.第2部分:反向直流牽引電動機及其控制設備 | Railway applications - Rolling stock; Combined testing - Part 2: Chopper-fed direct current traction motors and their control (IEC 61377-2:2002); German version EN 61377-2:2002 |
| DIN EN 61378-2-2001 | 轉換器變壓器.第2部分:高壓直流轉換器(HVDC)用變壓器 (IEC 61378-2:2001); 德文版本 EN 61378-2:2001 | Convertor transformers - Part 2: Transformers for HVDC applications (IEC 61378-2:2001); German version EN 61378-2:2001 |
| DIN EN 61557-1-2007 | 1000V以下交流和1500V以下直流低壓配電系統的電氣安全.防護措施的測試、測量或監測用設備.第1部分:一般要求 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements (IEC 61557-1:2007); German version EN 61557-1:2007 |
| DIN EN 61557-10-2001 | 可達1000V交流和1500V直流的低壓分配系統的電氣安全.防護措施的試驗、測量或監測設備.第10部分:防護措施的 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures (IEC 61557-10:2000); German version EN 61557-10:2001 |
| DIN EN 61557-11-2009 | 交流1000V和直流1500V以下低壓配電系統電氣安全.防護檢測的試驗,測量或監控設備.第11部分:TT,TN和IT系統中A | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems (IEC 61557-11:2009); German version EN 61557-11:2009 |
| DIN EN 61557-12-2008 | 交流1000V和直流1500V以下低壓配電系統的電氣安全.保護措施的測試、測量或監測用設備.第12部分:性能測量和 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD) (IEC 61557-12:2007); German version EN 61557-12:2008 |
| DIN EN 61557-2-2008 | 小于1000V交流和1500V直流的低壓配電系統中電氣安全性.防護措施的試驗、測量和監控設備.第2部分:絕緣阻抗 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance (IEC 61557-2:2007); German version EN 61557-2:2007 |
| DIN EN 61557-3-2008 | 小于1000V交流和1500V直流低壓配電系統中的電氣安全性.防護措施的試驗、測量或監控設備.第3部分:回路阻抗 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance (IEC 61557-3:2007); German version EN 61557-3:2007 |
| DIN EN 61557-4-2007 | 1000V以下交流和1500V以下直流低壓配電系統的電氣安全.防護措施的測試、測量或監測用設備.第4部分:接地和等 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding (IEC 61557-4:2007); German version EN 61557-4:2007 |
| DIN EN 61557-5-2007 | 1000V以下交流和1500V以下直流低壓配電系統的電氣安全性.防護措施的測試、測量和監測用設備.第5部分:對地電 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth (IEC 61557-5:2007); German version EN 61557-5:2007 |
| DIN EN 61557-6-2008 | 1000V以下交流和1500V以下直流低壓配電系統的電氣安全.防護措施的檢驗、測量或監測設備.第6部分:TT、TN和IT | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems (IEC 61557-6:2007); German version EN 61557-6:2007 |
| DIN EN 61557-7-2008 | 小于1000V交流和1500V直流低壓配電系統中的電氣安全性.防護措施的試驗、測量和監控設備.第7部分:相序 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence (IEC 61557-7:2007); German version EN 61557-7:2007 |
| DIN EN 61557-8-2007 | 1000V以下交流和1500V以下直流低壓配電系統的電氣安全.防護措施的測試、測量或監測用設備.第8部分:IT系統用 | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measurers - Part 8: Insulation monitoring devices for IT systems (IEC 61557-8:2007 + Corrigendum 2007-05); German version EN 61557-8:2007 |
| DIN EN 61660-1 Bb.1-2002 | 短路電流.電廠和變電站直流輔助設備中的短路電流.第1部分:短路電流和效應的計算范例 (IEC/TR 61660-3:2000- | Short-circuit currents - Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Examples of calculations (of short-circuit current and effects) (IEC/TR 61660-3:2000-02) |
| DIN EN 61660-1 Berichtigung 1-2010 | 短路電流.發電廠和變電站中直流輔助設備的短路電流.第1部分:短路電流的計算(IEC 61660-1-1997).德文版本EN | Short-circuit currents - Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents (IEC 61660-1:1997); German version EN 61660-1:1997, Corrigendum to DIN EN 61660-1 (VDE 0102-10):1998-06; (IEC-Cor.:2000 to IEC 61660-1:1997) |
| DIN EN 61660-1-1998 | 短路電流.發電廠和變電站中直流輔助設備的短路電流.第1部分:短路電流的計算 | Short-circuit currents - Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents (IEC 61660-1:1997); German version EN 61660-1:1997 |
| DIN EN 61660-2-1998 | 短路電流.發電廠和變電站中直流輔助設備的短路電流.第2部分:效應計算 | Short-circuit currents - Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 2: Calculation of effects (IEC 61660-2:1997); German version EN 61660-2:1997 |
| DIN EN 61788-1-2007 | 超導性.第1部分:臨界溫度測量.銅/鈮-鈦復合超導體的直流臨界電流(IEC 61788-1:2006) | Superconductivity - Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors (IEC 61788-1:2006); German version EN 61788-1:2007 |
| DIN EN 61788-2-2007 | 超導性.第2部分:臨界溫度測量.鈮(指數3)-錫復合超導體的臨界直流電流 | Superconductivity - Part 2: Critical current measurement - DC critical current of Nb<(Index)3>Sn composite superconductors (IEC 61788-2:2006); German version EN 61788-2:2007 |
| DIN EN 61800-1-1999 | 可調速的電驅動系統.第1部分:一般要求.低電壓可調速的直流電驅動系統的額定值規范 | Adjustable speed electrical power drive systems - Part 1: General requirements; rating specifications for low voltage adjustable speed d.c. power drive systems (IEC 61800-1:1997); German version EN 61800-1:1998 |
| DIN EN 61803-2000 | 高壓直流（HVDC)變流站功率損失的測定 | Determination of power losses in high-voltage direct current (HVDC) converter stations (IEC 61803:1999 + Corrigendum 1999); German version EN 61803:1999 |
| DIN EN 61851-21-2002 | 電力公路車輛的電氣設備.電動車輛感應式充電系統.第2-1部分:傳導連接于交流/直流電源的電動車輛要求 (IEC 6 | Electrical equipment of electric road vehicles - Electric vehicles conductive charging system - Part 2-1: Electric vehicle requirements for conductive connection to an a.c./d.c. supply (IEC 61851-21:2001); German version EN 61851-21:2002 |
| DIN EN 62199-2005 | 直流裝置套管 | Bushings for d.c. application (IEC 62199:2004); German version EN 62199:2004 |
| DIN EN 62384-2010 | 發光二極管(LED)模塊的直流(DC)或交流(AC)電源電子控制裝置.性能要求 | DC or AC supplied electronic control gear for LED modules - Performance requirements (IEC 62384:2006 + A1:2009); German version EN 62384:2006 + A1:2009 |
| DIN EN 62386-206-2010 | 數字可尋址照明接口.第206部分:控制裝置用特殊要求.數字信號轉換為直流電壓信號(裝置類型 5) | Digital addressable lighting interface - Part 206: Particular requirements for control gear - Conversion from digital signal into d.c. voltage (device type 5) (IEC 62386-206:2009); German version EN 62386-206:2009 |
| DIN EN 62501-2010 | 高電壓直流(HVDC)電力傳輸用電壓源換流器(VSC)電子管.電氣測試 | Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing (IEC 62501:2009); German version EN 62501:2009 |
| DIN EN ISO 10133-2002 | 小型船舶.電氣系統.超低電壓直流裝置 (ISO 10133:2000); 德文版本 EN ISO 10133:2000 | Small craft - Electrical systems - Extra-low-voltage d.c. installations (ISO 10133:2000); German version EN ISO 10133:2000 |
| DIN EN ISO 8849-2004 | 小艇.電動直流艙底泵 | Small craft - Electrically operated direct-current bilge pumps (ISO 8849:2003); German version EN ISO 8849:2003 |
| DIN ETS 300132-1-2005 | 設備工程(EE).向電信設備輸入的電源接口.第1部分:來自于直流電流(dc)源的交流(ac)的操作 | Equipment Engineering (EE) - Power supply interface at the input to telecommunications equipment - Part 1: Operated by alternating current (ac) derived from direct current (dc) sources (Endorsement of the English version ETS 300132-1 (1996-09) as German standard) |
| DIN IEC 60381-1-1985 | 過程控制系統模擬信號.第1部分:直流電流信號 | Analogue signals for process control systems; direct current signals; identical with IEC 60381-1, edition 1982 |
| DIN IEC 60381-2-1980 | 過程控制系統模擬信號.第2部分:直流電壓信號 | Analogue signals for process control systems; part 2: direct voltage signals |
| DIN IEC 60384-12-1-1991 | 電子設備固定電容器.第12部分:分規范:固定聚碳酸酯薄膜介質金屬箔直流電容器.第1節:空白詳細規范:金屬箔式 | Fixed capacitors for use in electronic equipment; part 12: blank detail specification: fixed polycarbonate film dielectric metal foil d.c. capacitors; assessment level E; identical with IEC 60384-12-1:1988 |
| DIN IEC 60384-12-1991 | 電子設備固定電容器.第12部分:分規范:固定聚碳酸酯薄膜介質金屬箔直流電容器 | Fixed capacitors for use in electronic equipment; part 12: sectional specification: fixed polycarbonate film dielectric metal foil d.c. capacitors; identical with IEC 60384-12:1988 |
| DIN IEC 60384-5-1-1994 | 電子設備固定電容器.第5部分:額定電壓不超過3000V的固定式直流云母電容器.第1節:評定等級 E | Fixed capacitors for use in electronic equipment; part 5: blank detail specification: fixed mica dielectric d.c. capacitors with a rated voltage not exceeding 3000 V; assessment level E; identical with IEC 60384-5-1:1993 |
| DIN IEC 60384-5-1994 | 電子設備用固定電容器.第5部分:分規范:額定電壓不超過3000V的直流云母固定電容器.試驗方法選擇和一般要求 | Fixed capacitors for use in electronic equipment; part 5: sectional specification: fixed mica dielectric d.c. capacitors with a rated voltage not exceeding 3000 V; selection of methods of test general requirements; identical with IEC 60384-5:1993 |
| DIN IEC 60946-1991 | 過程測量和控制裝置的二元直流電壓信號 | Binary direct voltage signals for process measurement and control systems; identical with IEC 60946:1988 |
| DIN V VDE V 0664-110-2009 | 余電控制的B型斷路器,無整合式過電流保護,根據余電的交流和直流電流進行動作,以提供尖端的防火保護.第110部 | Residual current operated circuit-breakers type B without integral overcurrent protection to operate at residual alternating and residual direct currents for advanced preventative protection against fire - Part 110: RCCB Type B+ |
| DIN V VDE V 0664-210-2009 | B型由殘余電流控制的斷路器,帶整合式過電流保護,適用于殘余交替和殘余直流電流進行高級防火防護.第210部分: | Residual current operated circuit-breakers type B with integral overcurrent protection to operate at residual alternating and residual direct currents for advanced preventative protection against fire - Part 210: RCBO Type B+ |
| DIN VDE 0228-4-1987 | 電力設備干擾通信設備的應對措施.第4部分:直流電牽引系統產生的干擾 | Proceedings in the case of interference on telecommunication; installations by electric power installations; interference by d.c. traction systems |
| DIN VDE 0228-5-1987 | 電力設備干擾通信設備的應對措施.第5部分:高壓直流電傳輸設備產生的干擾 | Proceedings in the case of interference on telecommunication installations by electric power installations; interference by highvoltage direct current transmission systems |
| DIN VDE 0418-3-1965 | 電度表規范.第3部分:直流電表 | Specifications for electric integrating meters; Direct-current meters |
| DIN VDE 0560-11-1970 | 電容器的規范.第11部分:大于 600 V 的脈動直流電壓均衡電容器的規范 | Rules for capacitors; part 11: Rules for capacitors of more than 600 V for the equalizing of pulsating direct voltages |
| DIN VDE 0560-16-1970 | 電容器的規則.第16部分.額定直流電壓1KV以下的鉭電解質電容器的規則 | Rules for capacitors; part 16: Rules for tantalum electrolyte capacitors for rated direct voltages up to 1000 V |
| DIN VDE 0660-112-1987 | 開關和控制設備.1200V以上至3000V以下直流負荷開關、隔離開關和負荷隔離開關的補充規范 | Switchgear and controlgear; additional specification for d.c. air-break switches, air-break disconnectors and air-break switch-disconnectors exceeds 1200 V but not exceeds 3000 V |
| DIN VDE 0682-742-2000 | 電壓為交流1000V以下和直流1500V以下的帶電作業用架空設備 | Aerial devices for live working on live parts with voltages up to a.c. 1000 V and d.c. 1500 V |
| 編號 | 中文名稱 | 英文名稱 |