| 編號 | 中文名稱 | 英文名稱 |
|---|
| IEC 61223-2-7-1999
| 醫用成像部門的評價及例行試驗 第2-7部分:穩定性試驗 牙科X射線設備(不包括全景設備)
| Evaluation and routine testing in medical imaging departments - Part 2-7: Constancy tests - Equipment for intra-oral dental radiography excluding dental panoramic equipment
|
| IEC 61223-3-4-2000
| 醫用成像部門的評價及例行試驗 第3-4部分:驗收試驗 牙科X射線設備圖像性能
| Evaluation and routine testing in medical imaging departments - Part 3-4: Acceptance tests - Imaging performance of dental X-ray equipment
|
| ISO 10139-1 Technical Corrigendum 1-2006
| 牙科學.活動假牙用軟襯材料.第1部分:短期使用的材料.技術勘誤1
| Dentistry - Soft lining materials for removable dentures - Part 1: Materials for short-term use; Technical Corrigendum 1
|
| ISO 10139-1-2005
| 牙科學.活動義齒用軟襯材料.第1部分:短期材料
| Dentistry - Soft lining materials for removable dentures - Part 1: Materials for short-term use
|
| ISO 10139-2-1999
| 牙科學 活動義齒軟襯材料 第2部分:長期使用的材料
| Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use
|
| ISO 10271 Technical Corrigendum 1-2005
| 牙科金屬材料.抗腐蝕試驗方法.技術勘誤1
| Dental metallic materials - Corrosion test methods; Technical Corrigendum 1
|
| ISO 10271-2001
| 牙科金屬材料 抗腐蝕試驗方法
| Dental metallic materials - Corrosion test methods
|
| ISO 10323-1991
| 牙科旋轉器械 切盤和輪的內徑
| Dental rotary instruments; bore diameters for discs and wheels
|
| ISO 10451-2002
| 牙科植入系統.技術文件內容
| Dental implant system - Contents of technical file
|
| ISO 10477-2004
| 牙科學.高聚物基的牙冠和齒橋材料
| Dentistry - Polymer-based crown and bridge materials
|
| ISO 10637-1999
| 牙科設備 高和中容量抽吸系統
| Dental equipment - High- and medium-volume suction systems
|
| ISO 10650-1-2004
| 牙科學.動力聚合活化劑.第1部分:石英鎢鹵素?zé)? | Dentistry - Powered polymerization activators - Part 1: Quartz tungsten halogen lamps
|
| ISO 10650-2-2007
| 牙科學.動力聚合活化劑.第2部分:發光二極管(LED)燈
| Dentistry - Powered polymerization activators - Part 2: Light-emitting diode (LED) lamps
|
| ISO 11143-1999
| 牙科設備 汞齊合金分離器
| Dental equipment - Amalgam separators
|
| ISO 11144-1995
| 牙科設備 供水及排水管接頭
| Dental equipment - Connections for supply and waste lines
|
| ISO 11244-1998
| 牙科釬焊包埋料
| Dental brazing investments
|
| ISO 11498-1997
| 牙科手機 牙科用低壓電動機
| Dental handpieces - Dental low-voltage electrical motors
|
| ISO 11499-2007
| 牙科學.局部麻醉用一次性盒
| Dentistry - Single-use cartridges for local anaesthetics
|
| ISO 11609-1995
| 牙科學 牙膏 要求、試驗方法和標志
| Dentistry - Toothpastes - Requirements, test methods and marking
|
| ISO 13294-1997
| 牙科手機 牙鉆氣動機
| Dental handpieces - Dental air-motors
|
| ISO 13295-2007
| 牙科學.旋轉器械用心軸
| Dentistry - Mandrels for rotary instruments
|
| ISO 13397-2-2005
| 牙科學.牙周刮匙、牙刮器和牙挖器.第2部分:Gr型牙周刮匙
| Dentistry - Periodontal curettes, dental scalers and excavators - Part 2: Periodontal curettes of Gr-type
|
| ISO 13402-1995
| 外科和牙科手持器械 耐蒸氣清毒、耐腐蝕和耐熱性能的測定
| Surgical and dental hand instruments - Determination of resistance against autoclaving, corrosion and thermal exposure
|
| ISO 13716-1999
| 牙科學 可逆和不可逆水解膠體印模材料系統
| Dentistry - Reversible-irreversible hydrocolloid impression material systems
|
| ISO 13897 Technical Corrigendum 1-2003
| 牙科學.汞齊合金膠囊.技術勘誤1
| Dentistry - Amalgam capsules; Technical Corrigendum 1
|
| ISO 13897-2003
| 牙科學.汞齊合金膠囊
| Dentistry - Amalgam capsules
|
| ISO 14233-2003
| 牙科學.聚合基模具材料
| Dentistry - Polymer-based die materials
|
| ISO 14356-2003
| 牙科學.復制材料
| Dentistry - Duplicating material
|
| ISO 15087-1-1999
| 牙科起子 第1部分:一般要求
| Dental elevators - Part 1: General requirements
|
| ISO 15087-2-2000
| 牙科起子 第2部分:沃里克吉姆斯起子
| Dental elevators - Part 2: Warwick James elevators
|
| ISO 15087-3-2000
| 牙科起子 第3部分:CRYER起子
| Dental elevators - Part 3: Cryer elevators
|
| ISO 15087-4-2000
| 牙科起子 第4部分:COUPLAND起子
| Dental elevators - Part 4: Coupland elevators
|
| ISO 15087-5-2000
| 牙科起子 第5部分:BEIN起子
| Dental elevators - Part 5: Bein elevators
|
| ISO 15087-6-2000
| 牙科起子 第6部分:FLOHR起子
| Dental elevators - Part 6: Flohr elevators
|
| ISO 15098-1-1999
| 牙科鑷子 第1部分:一般要求
| Dental tweezers - Part 1: General requirements
|
| ISO 15098-2-2000
| 牙科鑷子 第2部分:Meriam型
| Dental tweezers - Part 2: Meriam types
|
| ISO 15098-3-2000
| 牙科鑷子 第3部分:學院型
| Dental tweezers - Part 3: College types
|
| ISO 15606-1999
| 牙科手機 氣動刮器和刮器梢尖
| Dental handpieces - Air-powered scalers and scaler tips
|
| ISO 1564-1995
| 牙科瓊脂基水膠仿印模材料
| Dental aqueous impression materials based on agar
|
| ISO 1567 AMD 1-2003
| 牙科學.義齒基托聚合物.修改件1
| Dentistry - Denture base polymers; Amendment 1
|
| ISO 1567-1999
| 牙科學 義齒基托聚合物
| Dentistry - Denture base polymers
|
| ISO 15841-2006
| 牙科學.畸齒矯正用金屬線
| Dentistry - Wires for use in orthodontics
|
| ISO 15854-2005
| 牙科學.鑄型蠟和假牙托塑性材料
| Dentistry - Casting and baseplate waxes
|
| ISO 15912-2006
| 牙科.鑄件研究和耐火硬模材料
| Dentistry - Casting investments and refractory die materials
|
| ISO 16059-2007
| 牙科學.數據交換用匯編必需的要素
| Dentistry - Required elements for codification used in data exchange
|
| ISO 16408-2004
| 牙科學.口腔衛生制品.口腔沖洗
| Dentistry - Oral hygiene products - Oral rinses
|
| ISO 16409-2006
| 牙科學.口腔衛生制品.手動牙刷
| Dentistry - Oral hygiene products - Manual interdental brushes
|
| ISO 1797-1 AMD 1-1997
| 牙科旋轉器械 柄 第1部分:金屬柄 修改1
| Dental rotary instruments - Shanks - Part 1: Shanks made of metals; Amendment 1
|
| ISO 1797-1-1992
| 牙科旋轉器械 柄 第1部分:金屬柄
| Dental rotary instruments; shanks; part 1: shanks made of metals
|
| ISO 1797-2-1992
| 牙科旋轉器械 柄 第2部分:塑料柄
| Dental rotary instruments; shanks; part 2: shanks made of plastics
|
| ISO 1942-1 AMD 1-1992
| 牙科詞匯 第1部分:通用及臨床術語 修改1 兩種語言版
| Dental vocabulary; part 1: general and clinical terms; amendment 1
|
| ISO 1942-1 AMD 2-1992
| 牙科詞匯 第1部分:通用及臨床術語 修改2 兩種語言版
| Dental vocabulary; part 1: general and clinical terms; amendment 2
|
| ISO 1942-1 AMD 3-1993
| 牙科詞匯.第1部分:一般和臨床術語.修改件3
| Dental vocabulary; part 1: general and clinical terms; amendment 3
|
| ISO 1942-1 AMD 5-1993
| 牙科詞匯 第1部分:通用及臨床術語 修改5 兩種語言版
| Dental vocabulary; part 1: general and clinical terms; amendment 5
|
| ISO 1942-1-1989
| 牙科詞匯 第1部分:通用及臨床術語 兩種語言版
| Dental vocabulary; part 1: general and clinical terms
|
| ISO 1942-2 AMD 1-1992
| 牙科詞匯 第2部分:牙科材料 修改1 兩種語言版
| Dental vocabulary; part 2: dental materials; amendment 1
|
| ISO 1942-2 AMD 2-1992
| 牙科詞匯 第2部分:牙科材料 修改2 兩種語言版
| Dental vocabulary; part 2: dental materials; amendment 2
|
| ISO 1942-2-1989
| 牙科詞匯 第2部分:牙科材料 兩種語言版
| Dental vocabulary; part 2: dental materials
|
| ISO 1942-3 AMD 1-1992
| 牙科詞匯 第3部分:牙科器械 修改1 兩種語言版
| Dental vocabulary; part 3: dental instruments; amendment 1
|
| ISO 1942-3 AMD 2-1992
| 牙科詞匯 第3部分:牙科器械 修改2 兩種語言版
| Dental vocabulary; part 3: dental instruments; amendment 2
|
| ISO 1942-3-1989
| 牙科詞匯 第3部分:牙科器械 兩種語言版
| Dental vocabulary; part 3: dental instruments
|
| ISO 1942-4 AMD 1-1992
| 牙科詞匯 第4部分:牙科設備 修改1 兩種語言版
| Dental vocabulary; part 4: dental equipment; amendment 1
|
| ISO 1942-4-1989
| 牙科詞匯 第4部分:牙科設備 兩種語言版
| Dental vocabulary; part 4: dental equipment
|
| ISO 1942-5-1989
| 牙科詞匯 第5部分:試驗術語 兩種語言版
| Dental vocabulary; part 5: terms associated with testing
|
| ISO 20126-2005
| 牙科學.手動牙刷.一般要求和試驗方法
| Dentistry - Manual toothbrushes - General requirements and test methods
|
| ISO 20127-2005
| 牙科.電動牙刷.一般要求和試驗方法
| Dentistry - Powered toothbrushes - General requirements and test methods
|
| ISO 21530-2004
| 牙科學.牙科設備表面用材料.耐化學消毒劑的測定
| Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants
|
| ISO 21533-2003
| 牙科.韌帶內注射用可重復使用的管式注射器
| Dentistry - Reusable cartridge syringes intended for intraligamentary injections
|
| ISO 2157-1992
| 牙科旋轉器械 公稱直徑和命名代碼
| Dental rotary instruments; nominal diameters and designation code number
|
| ISO 21606-2007
| 牙科學.正畸學用彈性體輔助裝置
| Dentistry - Elastomeric auxiliaries for use in orthodontics
|
| ISO 21671-2006
| 牙科學.旋轉拋光器
| Dentistry - Rotary polishers
|
| ISO 22112-2005
| 牙科學.牙修復術用假牙
| Dentistry - Artificial teeth for dental prostheses
|
| ISO 22254-2005
| 牙科學.手動牙刷.毛刷部分耐彎曲性能
| Dentistry - Manual toothbrushes - Resistance of tufted portion to deflection
|
| ISO 22374-2005
| 牙科學.牙鉆手柄.電動刮器和刮器梢頭
| Dentistry - Dental handpieces - Electrical-powered scalers and scaler tips
|
| ISO 22674-2006
| 牙科.固定式和可摘式修復體和牙科器具用金屬材料
| Dentistry - Metallic materials for fixed and removable restorations and appliances
|
| ISO 22794-2007
| 牙科學.口腔和上頜面外科中骨填充物和增加物用植入材料.技術文檔內容
| Dentistry - Implantable materials for bone filling and augmentation in oral and maxillofacial surgery - Contents of a technical file
|
| ISO 22803-2004
| 牙科學.口腔及頜面外科中受控制的組織再生用薄膜材料.技術文檔的內容
| Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file
|
| ISO 24234-2004
| 牙科學.牙科汞齊合金用汞及合金
| Dentistry - Mercury and alloys for dental amalgam
|
| ISO 3107 Technical Corrigendum 1-2006
| 牙科.氧化鋅/丁香酚和氧化鋅/不含丁香酚的氧化鋅粘固粉.技術勘誤1
| Dentistry - Zinc oxide/eugenol and zinc oxide/non-eugenol cements; Technical Corrigendum 1
|
| ISO 3107-2004
| 牙科學.氧化鋅/丁香酚及不含丁香酚的氧化鋅粘固粉
| Dentistry - Zinc oxide/eugenol and zinc oxide/non-eugenol cements
|
| ISO 3665-1996
| 攝影 牙科用射線照相膠片 規范
| Photography - Intra-oral dental radiographic film - Specification
|
| ISO 3823-1-1997
| 牙科旋轉器械 牙鉆 第1部分:不銹鋼牙鉆和硬質合金牙鉆
| Dental rotary instruments - Burs - Part 1: Steel and carbide burs
|
| ISO 3823-2-2003
| 牙科.旋轉牙鉆器械.第2部分:精加工牙鉆
| Dentistry - Rotary bur instruments - Part 2: Finishing burs
|
| ISO 3950-1984
| 牙科學.牙齒和口腔區的名稱與符號體系
| Dentistry - Designation system for teeth and areas of the oral cavity
|
| ISO 3964-1982
| 牙科手機 連接尺寸
| Dental handpieces; Coupling dimensions
|
| ISO 4049-2000
| 牙科學 聚合物基充填、修復及粘接材料
| Dentistry - Polymer-based filling, restorative and luting materials
|
| ISO 4073-1980
| 牙科設備 牙科治療室設備項目 識別體系
| Dental equipment; Items of dental equipment at the working place; Identification system
|
| ISO 4823 AMD 1-2007
| 牙科學.彈性印模材料.修改件1
| Dentistry - Elastomeric impression materials; Amendment 1
|
| ISO 4823 Technical Corrigendum 1-2004
| 牙科學.彈性印模材料.技術勘誤1
| Dentistry - Elastomeric impression materials; Technical Corrigendum 1
|
| ISO 4823-2000
| 牙科學 彈性體印模材料
| Dentistry - Elastomeric impression materials
|
| ISO 5799-1991
| 攝影 醫用和牙科用直接爆光射線攝影膠片/處理系統 ISO感光速度和ISO平均梯度的測定
| Photography; direct-exposing medical and dental radiographic film/process systems; determination of ISO speed and ISO average gradient
|
| ISO 6360-1 Technical Corrigendum 1-2007
| 牙科.旋轉儀器的數字編碼系統.第1部分:一般特性.技術勘誤1
| Dentistry - Number coding system for rotary instruments - Part 1: General characteristics; Technical Corrigendum 1
|
| ISO 6360-1-2004
| 牙科學.牙科旋轉器械的數字編碼體系.第1部分:一般特性
| Dentistry - Number coding system for rotary instruments - Part 1: General characteristics
|
| ISO 6360-2-2004
| 牙科學.旋轉器械用數字編碼體系.第2部分:形狀
| Dentistry - Number coding system for rotary instruments - Part 2: Shapes
|
| ISO 6360-3-2005
| 牙科學.旋轉器械的數字編碼系統.第3部分:磨石和刀具的具體特性
| Dentistry - Number coding system for rotary instruments - Part 3: Specific characteristics of burs and cutters
|
| ISO 6360-4-2004
| 牙科學.旋轉器械的數字編碼體系.第4部分:金剛石器械的具體特性
| Dentistry - Number coding system for rotary instruments - Part 4: Specific characteristics of diamond instruments
|
| ISO 6360-6-2004
| 牙科學.旋轉器械的數字編碼體系.第6部分:研磨器械的具體特性
| Dentistry - Number coding system for rotary instruments - Part 6: Specific characteristics of abrasive instruments
|
| ISO 6360-7-2006
| 牙科學.旋轉器械的數字編碼體系.第7部分:心軸和特殊器械的具體特性
| Dentistry - Number coding system for rotary instruments - Part 7: Specific characteristics of mandrels and special instruments
|
| ISO 6872 AMD 1-1997
| 牙科陶瓷.修改件1
| Dental ceramic; Amendment 1
|
| ISO 6872-1995
| 牙科烤瓷
| Dental ceramic
|
| ISO 6873-1998
| 牙科石膏制品
| Dental gypsum products
|
| ISO 6874-2005
| 牙科學.聚合物基窗溝封閉劑
| Dentistry - Polymer-based pit and fissure sealants
|
| ISO 6875-1995
| 牙科病人用椅
| Dental patient chair
|
| ISO 6876-2001
| 牙科牙根管充填材料
| Dental root canal sealing materials
|
| ISO 6877-2006
| 牙科.牙根管牙膠尖
| Dentistry - Root-canal obturating points
|
| ISO 7405-1997
| 牙科學 用于牙科的醫療器械生物相容性臨床前評價 牙科材料的試驗方法
| Dentistry - Preclinical evaluation of biocompatibility of medical devices used in dentistry - Test methods for dental materials
|
| ISO 7488-1991
| 牙科銀汞合金攪拌器
| Dental amalgamators
|
| ISO 7491-2000
| 牙科材料 色穩定性的測定
| Dental materials - Determination of colour stability
|
| ISO 7492-1997
| 牙科探針
| Dental explorers
|
| ISO 7493-2006
| 牙科.醫生凳
| Dentistry - Operator's stool
|
| ISO 7494-1-2004
| 牙科學.牙科裝置.第1部分:一般要求和試驗方法
| Dentistry - Dental units - Part 1: General requirements and test methods
|
| ISO 7494-2-2003
| 牙科學.牙科綜合治療設備.第2部分:供水和供氣
| Dentistry - Dental units - Part 2: Water and air supply
|
| ISO 7551-1996
| 牙科吸水捻
| Dental absorbent points
|
| ISO 7711-1-1997
| 牙科旋轉器械 金鋼鉆器械 第1部分:尺寸、要求、標記和包裝
| Dental rotary instruments - Diamond instruments - Part 1: Dimensions, requirements, marking and packaging
|
| ISO 7711-2-1992
| 牙科旋轉器械 金剛鉆器械 第2部分:切盤
| Dental rotary instruments; diamond instruments; part 2: discs
|
| ISO 7711-3-2004
| 牙科學.旋轉器械用金剛鉆器械.第3部分:磨粒尺寸、標注與彩色編碼
| Dentistry - Diamond rotary instruments - Part 3: Grit sizes, designation and colour code
|
| ISO 7785-1-1997
| 牙科手機 第1部分:高速氣動渦輪手機
| Dental handpieces - Part 1: High-speed air turbine handpieces
|
| ISO 7785-2-1995
| 牙科手機 第2部分:直角和彎角手機
| Dental handpieces - Part 2: Straight and geared angle handpieces
|
| ISO 7786-2001
| 牙科旋轉器械 技工室用研磨器械
| Dental rotary instruments - Laboratory abrasive instruments
|
| ISO 7787-1-1984
| 牙科旋轉器械 切割刀具 第1部分:技工室用鋼質刀具
| Dental rotary instruments; Cutters; Part 1 : Steel laboratory cutters
|
| ISO 7787-2-2000
| 牙科旋轉器械 切割刀具 第2部分:技工室用硬質合金刀具
| Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters
|
| ISO 7787-3-1991
| 牙科旋轉器械 切割工具 第3部分:技工室研磨機用硬質合金刀具
| Dental rotary instruments; cutters; part 3: carbide laboratory cutters for milling machines
|
| ISO 7787-4-2002
| 牙科用旋轉器械.切割刀具.第1部分:實驗室用小型硬質合金刀具
| Dental rotary instruments - Cutters - Part 4: Miniature carbide laboratory cutters
|
| ISO 7885-2000
| 一次性牙科直接注射針頭
| Sterile dental injection needles for single use
|
| ISO 8282-1994
| 牙科設備 汞及合金混合器和調和器
| Dental equipment - Mercury and alloy mixers and dispensers
|
| ISO 8325-2004
| 牙科.旋轉器械試驗方法
| Dentistry - Test methods for rotary instruments
|
| ISO 9168-1991
| 牙科手機 軟管連接件
| Dental handpieces; hose connectors
|
| ISO 9173-1-2006
| 牙科.拔牙鉗.第1部分:一般要求和試驗方法
| Dentistry - Extraction forceps - Part 1: General requirements and test methods
|
| ISO 9333-2006
| 牙科.上光材料
| Dentistry - Brazing materials
|
| ISO 9680-2007
| 牙科.工作燈
| Dentistry - Operating lights
|
| ISO 9687-1993
| 牙科設備 圖形符號
| Dental equipment; graphical symbols
|
| ISO 9693 AMD 1-2005
| 牙科金屬烤瓷修復系統.修改件1
| Metal-ceramic dental restorative systems; Amendment 1
|
| ISO 9693-1999
| 牙科金屬烤瓷修復系統
| Metal-ceramic dental restorative systems
|
| ISO 9873 Technical Corrigendum 1-2000
| 牙科手持器械 可重復使用的鏡子和手柄 技術勘誤1
| Dental hand instruments - Reusable mirrors and handles; Technical Corrigendum 1
|
| ISO 9873-1998
| 牙科手持器械 可重復使用的鏡子和手柄
| Dental hand instruments - Reusable mirrors and handles
|
| ISO 9917-1-2007
| 牙科學.水基粘結劑.第1部分:粉末/液體酸基粘結劑
| Dentistry - Water-based cements - Part 1: Powder/liquid acid-base cements
|
| ISO 9917-2-1998
| 牙科水基膠粘劑 第2部分:光固化膠粘劑
| Dental water-based cements - Part 2: Light-activated cements
|
| ISO 9997-1999
| 牙科卡式注射器
| Dental cartridge syringes
|
| ISO/TR 11175-1993
| 牙科植入物 研制牙科植入物指南
| Dental implants; guidelines for developing dental implants
|
| ISO/TR 14569-1-2007
| 牙科材料.磨損試驗指南.第1部分:牙刷磨損
| Dental materials - Guidance on testing of wear - Part 1: Wear by toothbrushing
|
| ISO/TR 15300-2001
| 牙科學 OSI臨床編碼規則在牙科產品分類和編碼中的應用
| Dentistry - Application of OSI clinical codification to the classification and coding of dental products
|
| ISO/TR 15599 Technical Corrigendum 1-2003
| 牙科實驗室規程的數字化編纂.技術勘誤1
| Digital codification of dental laboratory procedures; Technical Corrigendum 1
|
| ISO/TR 15599-2002
| 牙科實驗室規程的數字化編撰
| Digital codification of dental laboratory procedures
|
| ISO/TS 11405-2003
| 牙科材料.牙齒結構的附著力試驗
| Dental materials - Testing of adhesion to tooth structure
|
| ISO/TS 14569-2-2001
| 牙科材料 耐磨損試驗指南 第2部分：2和/或3體磨耗法
| Dental materials - Guidance on testing of wear - Part 2: Wear by two- and/or three body contact
|
| ISO/TS 17576-2004
| 牙科學.汞齊合金的腐蝕試驗
| Dentistry - Corrosion tests for amalgam
|
| ISO/TS 22595-1-2006
| 牙科.廠區面積設備.第1部分:吸入系統
| Dentistry - Plant area equipment - Part 1: Suction systems
|
| ISO/TS 22911-2005
| 牙科學.牙科植入系統的臨床前評定.動物試驗法
| Dentistry - Preclinical evaluation of dental implant systems - Animal test methods
|
| 編號 | 中文名稱 | 英文名稱 |
|---|