| 編號 | 中文名稱 | 英文名稱 |
|---|
| GB 9486-1988 | 柴油機穩態排氣煙度及測定方法 | Diesel engine--Exhaust smoke measurement method at steady state |
| GB 11122-2006 | 柴油機油(1997年版) | Diesel engine oils |
| GB 14097-1999 | 中小功率柴油機噪聲限值 | Noise limits for small and medium power dieselengines |
| GB 8189-87 | 柴油機排放試驗方法,第二部分:地下礦、機車、船舶及其它工農業機械用 | Diesel engine emissions - Test methods -Part 2: for underground mine, rail-traction, marine and other industrial and agricultural machineries |
| GB/T 5923-1986 | 汽車柴油機燃油濾清器的試驗方法 | Test methods of fuel filters for automotive compression ignition engines |
| GB/T 5924-1986 | 汽車柴油機燃油濾清器的試驗值及分級 | Test values and classification of fuel filters for automotive compression compression ignition engines |
| GB/T 14363-1993 | 柴油機機油消耗測定方法 | Measurement of lubricant oil consumption for diesel engines |
| GB 8840-1988 | 船用柴油機排氣煙度限值 | Limit for exhaust gas smoke of marine diesel engine |
| GB 11871-1989 | 船用柴油機輻射的空氣噪聲限值 | Limits of airborne noise emitted by marine diesel engines |
| GB/T 15097-1994 | 船用柴油機排氣排放污染物測量方法 | Measurement method for emission pollutants of exhaust gas of marine diesel engine |
| GB/T 5772-1986 | 柴油機噴油嘴偶件技術條件 | Technical specification for fuel injection nozzles of diesel engines |
| GB/T 9911-1988 | 船用柴油機輻射的空氣噪聲測量方法 | Measurement method of airborne noise emitted by marine diesel engine |
| GB/T 3221-1996 | 柴油機動力內河船舶系泊和航行試驗大綱 | Code for dock and sea trials of diesel-driven inland ships |
| ANSI/ASTM D4046-1991 | 用分光光度法對柴油機燃料中硝酸烷基酯的試驗方法 | Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry (05.02) |
| ANSI/ASTM D5967-2005 | T-8柴油機中柴油機油評價試驗方法 | Test Method for Evaluation of Diesel Engine Oils in the T-8 Diesel Engine |
| ANSI/ASTM D6278-2002 | 用歐洲柴油機噴射裝置測定含聚合物液體的剪切穩定性的試驗方法 | Test Method for Shear Stability of Polymer-Containing Fluids Using a European Diesel Injector Apparatus |
| ANSI/ASTM D6594-2005 | 柴油機油在135℃時的腐蝕評估測試方法 | Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135oC |
| ANSI/ASTM D6681-2005 | 高速單缸柴油機履帶車1P測試程序中發動機油的評估試驗方法 | Test Method for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine - Caterpillar 1p Test Procedure |
| ANSI/ASTM D6728-2001 | 采用旋轉圓盤電極原子發射光譜法測定氣體渦輪機和柴油機燃料雜質的試驗方法 | Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry |
| ANSI/ASTM D6923-2005 | 高速、單缸柴油機中的引擎機油性能評估測試方法.Caterpillar 1R試驗程序 | Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine - Caterpillar 1R Test Procedure |
| ANSI/ASTM D6987a-2005 | T-10廢氣再流通柴油機中的柴油機油性能評估測試方法 | Test Method for Evaluation of Diesel Engine Oils in the T-10 Exhaust Gas Recirculation Diesel Engine |
| ANSI/ASTM D7109-2006 | 使用30和90圈下歐洲柴油機注射裝置的含多聚物的液流的剪切穩定性的試驗方法 | Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles |
| ANSI/ASTM D975-2006 | 柴油機燃料油規范 | Specification for Diesel Fuel Oils |
| ANSI/SAE J1668-1993 | 柴油機燃油噴射泵的試驗 | Diesel Engines-Fuel Injection Pump Testing |
| ANSI/SAE J539-1993 | 柴油機電氣系統的電壓 | Electrical Systems, Voltages for Diesel |
| ASTM D 4868-2000 | 燃燒爐燃料和柴油機燃料燃燒的凈熱量和總熱量估算的標準試驗方法 | Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels |
| ASTM D 6278-2002 | 使用歐洲柴油機噴射裝置測定含液體聚合物的剪切穩定性的標準試驗方法 | Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus |
| ASTM D 6594-2005 | 135℃時柴油機油腐蝕性評價的標準試驗方法 | Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135°C |
| ASTM D 6987/D 6987Ma-2005 | T-10廢氣再循環柴油機中柴油機油評價的標準試驗方法 | Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine |
| ASTM F 1431-1992 | 柴油機排氣阻水閥 | Standard Specification for Water Trap for Diesel Exhaust |
| BS 3818-1964 | 柴油機車及有軌內燃機車自動密封加油接頭規范 | Specification for self-sealing fuelling couplings for diesel locomotives and diesel railcars |
| BS 6380-1997 | 符合BS EN 590和BS 2869 A2級及D級柴油機燃料和煤氣油的低溫性能和寒冷氣候使用指南 | Guide to low temperature properties and cold weather use of diesel fuels and gas oils conforming to BS EN 590 and classes A2 and D of BS 2869 |
| BS 6680-1985 | 煤礦和其他沼氣敏感礦用柴油機防火設備規范 | Specification for flameproof equipment for diesel engines for use in coal mines and other mines susceptible to firedamp |
| BS AU 141a-1971 | 道路車輛用柴油機性能規范 | Specification for the performance of diesel engines for road vehicles |
| BS DD ISO/PAS 22241-1-2006 | 柴油機發動機.氮氧化物還原劑AUS 32.質量要求 | Diesel engines - NOx reduction agent AUS 32 - Quality requirements |
| BS DD ISO/PAS 22241-2-2006 | 柴油機發動機.氮氧化物還原劑AUS 32.試驗方法 | Diesel engines - NOx reduction agent AUS 32 - Test methods |
| BS EN ISO 8861-1998 | 造船.柴油機船舶發動機室的通風.設計要求和計算依據 | Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations |
| BS ISO 13555-2-2003 | 柴油機.柴油機噴油系統動態定時的檢查程序.試驗方法 | Diesel engines - Procedure for checking the dynamic timing of diesel fuel injection equipment - Test method |
| BS ISO 2974-2005 | 柴油機.60°錐孔的高壓油管接頭管端部連接 | Diesel engines - High-pressure fuel injection pipe end-connections with 60 ° female cone |
| BS ISO 6519-2004 | 柴油機.噴油泵.軸端和轂盤的錐度 | Diesel engines - Fuel injection pumps - Tapers for shaft ends and hubs |
| BS ISO 7612-2006 | 柴油機.共軌燃料噴射系統用基座安裝直列式噴油泵和高壓供油泵.安裝尺寸 | Diesel engines - Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems - Mounting dimensions |
| BS MA 9-1970 | 柴油機和鍋爐上風煙道用廢氣管道法蘭、螺栓和密封墊 | Flanges, bolting and gaskets for exhaust gas, piping for diesel engines and boiler uptakes |
| DIN 45635-52-1986 | 機器排放的空氣傳播噪聲的測量.第52部分:包洛面法.礦山柴油機車和礦山軌道車 | Measurement of airborne noise emitted by machines; enveloping surface method; mine diesel locomotives and mine road railers |
| DIN 51452-1994 | 潤滑劑的試驗.柴油機廢油中油垢含量的測定.紅外線光譜法 | Testing of lubricants; determination of the soot content in used Diesel engine oils; infrared spectrometry |
| DIN 73358-1-1977 | 第1部分:柴油機用燃油過濾器.A 型外殼連接件 | Fuel filters for Diesel engines, shape A, body connections |
| DIN 73358-2-1977 | 第2部分:柴油機用燃油過濾器.過濾器插入件 | Fuel filters for Diesel engines; filter inserts |
| DIN 73360-1977 | 柴油機用可轉動燃油過濾器.A型外殼連接 | Reversible fuel filters for Diesel engines, shape A, body connections |
| DIN 73365-3-1970 | 柴油機噴射泵.第3部分:壓力管道連接件 | Injection pumps for Diesel engines; pressure pipe connections |
| DIN EN ISO 8861-1998 | 造船.柴油機船舶機艙的通風.設計要求和計算基準 | Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations (ISO 8861:1998); German version EN ISO 8861:1998 |
| DIN ISO 2697-2002 | 柴油機.噴油咀."S”規格 (ISO 2697:1999) | Diesel engines - Fuel nozzles - Size "S" (ISO 2697:1999) |
| DIN ISO 6519-1995 | 柴油機.噴油泵.軸端和轂環的錐度; 等同采用 ISO 6519:1993 | Diesel engines - Fuel injection pumps - Tapers for shaft ends and hubs; identical with ISO 6519:1993 |
| EN 14214-2003 | 車用燃料 柴油機用脂肪酸甲酯（FAME） 試驗方法和要求 | Automotive fuels - Fatty acid methyl esters (FAME) for diesel engines - Requirements and test methods |
| EN ISO 16147-2002 | 小艇 內裝柴油機 裝于發動機的燃料及電氣元件 | Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components (ISO 16147:2002) |
| EN ISO 8861-1998+AC-1998 | 造船 柴油機船舶機艙通風 設計要求和計算基準 | Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations (ISO 8861:1998) |
| GB 19756-2005 | 三輪汽車和低速貨車用柴油機排氣污染物排放限值及測量方法（中國I、II階段） | Limits and measurement methods for exhaust pollutants from diesel engines of tr-wheellow-speed goods vehicles |
| GB 20419-2006 | 農用柴油機油 | Diesel engine oils for agricultural use |
| GB 20891-2007 | 非道路移動機械用柴油機排氣污染物排放限值及測量方法（中國Ⅰ、Ⅱ階段） | |
| GB/T 10098-1988 | 船用中速柴油機齒輪箱技術條件 | The specification of marine gearbox for medium speed diesel engine |
| GB/T 10397-2003 | 中小功率柴油機振動評級 | Small and medium power engines--Evaluation ofvibration |
| GB/T 10826-1989 | 柴油機燃油系統術語 | Fuel system for diesel engine--Terminology |
| GB/T 11868-1996 | 救生艇用柴油機組 | Diesel engine set for lifeboats |
| GB/T 13410-1992 | 船用柴油機渦輪增壓器技術條件 | The technical specifications of turbochargers used for marine diesel engines |
| GB/T 16570-1996 | 汽車柴油機架裝直列式噴油泵安裝尺寸 | Motor vehicles--Cradle-mounted in-line fuel injection pumps for diesel engines--Mounting dimensions |
| GB/T 17038-1997 | 內燃機車柴油機油 | Railroad diesel engine oils |
| GB/T 17653-1999 | 汽車柴油機旋裝式燃油濾清器安裝和連接尺寸 | Motor vehicles--Spin-on fuel filters for combustion-ignition engines--Mounting and dimensions |
| GB/T 17805-1999 | 柴油機進、排氣流量的測量 | Measurement of intake air or exhaust gasflow of diesel engines |
| GB/T 20828-2007 | 柴油機燃料調合用生物柴油 (BD100) | |
| GB/T 20845-2007 | 小艇 舷內柴油機 機裝燃油和電氣部件 | |
| GB/T 2497-1993 | 船用柴油機增壓空氣冷卻器 | Charge air coolers for marine diesel engines |
| GB/T 2940-2005 | 柴油機用噴油泵、調速器、噴油器彈簧技術條件 | Technical specifications of springs for fuel pump,governor and injecter of diesel engines |
| GB/T 3093-2002 | 柴油機用高壓無縫鋼管 | High-pressure seamless steel tubes for diesel engine |
| GB/T 3367.1-2000 | 鐵道機車名詞術語柴油機零部件名詞 | Glossary of terms for railway locomotive--Names of component parts for diesel engine |
| GB/T 3367.7-2000 | 鐵道機車名詞術語柴油機術語 | Glossary of terms for railway locomotive--Terms of diesel engine |
| GB/T 3475-1983 | 船用柴油機調速系統技術條件 | Speed governing of marine diesel engines--Specifications |
| GB/T 3476-1983 | 船用柴油機調速系統試驗方法 | Speed governing of marine diesel engine，methods of test |
| GB/T 5264-1985 | 柴油機噴油泵柱塞偶件技術條件 | Technical specification of fuel injection pump plunger and barrel assembly for diesel engines |
| GB/T 5741-1985 | 船用柴油機排氣煙度測量方法 | Measurement method for exhaust gas smoke ofmarine diesel engine |
| GB/T 5770-1997 | 柴油機柱塞式噴油泵總成技術條件 | Technical requirements for jerk fuel injection pump |
| GB/T 5771-1986 | 柴油機噴油泵出油閥偶件技術條件 | Technical specification for delivery valves of fuel injection pumps of diesel engines |
| GB/T 5822.2-2004 | 鐵路內燃機車柴油機油石油醚不溶物測定方法 | Test method of petroleum ether insolubles in lubricating oil for railway locomotive diesel engine |
| GB/T 5822.4-1986 | 鐵路柴油機車柴油機油換油指標斑點試驗方法 | Oil-change criterion of railway diesel locomotive engine oils--Blotter spot test method |
| GB/T 5913-1986 | 柴油機車車內設備機械振動烈度評定方法 | Mechanical vibration of machines and equipments in diesel locomotive Evaluation of vibration severity in site |
| GB/T 6301-1986 | 船用柴油機燃油消耗率測定方法 | Determination of fuel consumption rate for marine diesel engine |
| GB/T 6302-1986 | 船用柴油機熱工參數的測量 | Measurement of thermodynamics parameters formarine diesel engine |
| GB/T 6573-1986 | 拖拉機柴油機散熱器型號編制方法 | Cooling water radiators for tractor diesel engines--Method of identification symbols |
| GB/T 6574-1986 | 拖拉機柴油機散熱器型式、參數和連接尺寸 | Types and dimensions and installation parameters of cooling water radiators for tractor diesel engines |
| GB/T 7028-1986 | 船用柴油機空氣冷卻器試驗方法 | Test method of charge air coolers for marine diesel engines |
| GB/T 7184-1987 | 中小功率柴油機振動測量方法 | Measurement method of vibration for small and medium power diesel engines |
| GB/T 7607-2002 | 柴油機油換油指標 | Criteria for change of engine oil used in diesel engine |
| GB/T 8029-1987 | 柴油機噴油泵校泵油 | Calibration fluid for diesel injection pump |
| GB/T 9487-1988 | 柴油機自由加速排氣煙度的測量方法 | Diesel engines--Exhaust smoke measurement method at free acceleration |
| ISO 13948-1-2000 | 柴油機 燃料噴射泵和燃料噴射器低壓連接 第1部分:螺紋連接件 | Diesel engines - Fuel injection pumps and fuel injector low-pressure connections - Part 1: Threaded connections |
| ISO 13948-2-2000 | 柴油機 燃料噴射泵和燃料噴射器低壓連接 第2部分:無螺紋(推進式)連接件 | Diesel engines - Fuel injection pumps and fuel injector low-pressure connections - Part 2: Non-threaded (push-on) connections |
| ISO 14681-1998 | 柴油機 燃料噴射泵試驗 燃料噴射器的校正 | Diesel engines - Fuel injection pump testing - Calibration fuel injectors |
| ISO 2697-1999 | 柴油機 噴油嘴偶件 “S”尺寸 | Diesel engines - Fuel nozzles - Size "S" |
| ISO 2698-1993 | 柴油機 柴油機噴油器件 7型和28型 | Diesel engines; clamp-mounted fuel injectors, types 7 and 28 |
| ISO 2699-1994 | 柴油機 法蘭安裝式“S”號噴油嘴 2、3、4、5和6型 | Diesel engines; flange-mounted fuel injectors, size "S"; types 2, 3, 4, 5 and 6 |
| ISO 2974-2005 | 柴油機.60度錐孔的高壓油管接頭管端部連接 | Diesel engines - High-pressure fuel injection pipe end-connections with 60 degrees female cone |
| ISO 4010-1998 | 柴油機 軸針式標準噴油嘴偶件 | Diesel engines - Calibrating nozzle, delay pintle type |
| ISO 4020-2001 | 道路車輛 柴油機過濾器 試驗方法 | Road vehicles - Fuel filters for diesel engines - Test methods |
| ISO 4093-1999 | 柴油機 噴油泵 試驗臺用高壓油管 | Diesel engines - Fuel injection pumps - High-pressure pipes for testing |
| ISO 4113-1988 | 道路車輛 柴油機噴油泵的校泵油 | Road vehicles; calibration fluid for diesel injection equipment |
| ISO 6519-2004 | 柴油機.噴油泵.軸端和轂盤的錐度 | Diesel engines - Fuel injection pumps - Tapers for shaft ends and hubs |
| ISO 7026-1997 | 柴油機 S尺寸軸針式噴油嘴偶件B型擰入式噴嘴器件(20、21、21.1和27型) | Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size "S", type "B" |
| ISO 7299-1996 | 柴油機 噴油泵端面法蘭 | Diesel engines - End-mounting flanges for fuel injection pumps |
| ISO 7310-1993 | 柴油機 有水平法蘭盤的旋轉式燃油濾清器頂蓋 安裝和連接尺寸 | Diesel engines; heads for spin-on fuel filters with horizontal flange; mounting and connecting dimensions |
| ISO 7311-1993 | 柴油機 有垂直法蘭盤的燃油濾清器頂蓋 安裝和連接尺寸 | Diesel engines; heads for fuel filters with vertical flange; mounting and connecting dimensions |
| ISO 7879-1997 | 柴油機 柱塞式噴油泵 安裝尺寸 | Diesel engines - Cradle-mounted in-line fuel injection pumps - Mounting dimensions |
| ISO 8356-1984 | 道路車輛 柴油機 22型螺旋擰入式噴油器 | Road vehicles; Diesel engines; Screw-in injector, type 22 |
| ISO 8861-1998 | 造船 柴油機船舶機艙通風 設計要求和計算基準 | Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations |
| ISO 8984-1-1993 | 柴油機 噴油器試驗 第1部分:手壓試驗和調整裝置 | Diesel engines; testing of fuel injectors; part 1: hand-lever-operated testing and setting apparatus |
| ISO 8984-2-1993 | 柴油機 噴油器試驗 第2部分:試驗程序 | Diesel engines; testing of fuel injectors; part 2: test methods |
| ISO 9102-1997 | 柴油機 壓燃式發動機用24、25、26和26 1型螺旋擰入式噴油器 | Diesel engines - Screw-in injection nozzle holders, types 24, 25, 26 and 26.1 |
| ISO/PAS 22241-1-2005 | 柴油機發動機.氮氧化物還原劑AUS 32.第1部分:質量要求 | Diesel engines - NOx reduction agent AUS 32 - Part 1: Quality requirements |
| ISO/PAS 22241-2-2005 | 柴油機發動機.氮氧化物還原劑AUS 32.第2部分:試驗方法 | Diesel engines - NOx reduction agent AUS 32 - Part 2: Test methods |
| JB 8891-1999 | 中小功率柴油機 排氣污染物排放限值 | |
| JB/T 10592-2006 | 拖拉機柴油機散熱器型式、參數和連接尺寸 | |
| JB/T 10630-2006 | 通用小型柴油機 產品修理、更換、退貨工作導則 | General purpose small diesel engines-Guidelines for product warranty |
| JB/T 10715-2007 | 柴油機 噴油泵端面法蘭安裝尺寸 | |
| JB/T 10716-2007 | 柴油機 直列式噴油泵 平底托架安裝尺寸 | |
| JB/T 10717-2007 | 柴油機 直列式噴油泵 弧形底安裝尺寸 | |
| JB/T 3923-2005 | 柴油機噴油泵聯軸器 型式及基本尺寸 | |
| JB/T 4198.1-2001 | 工程機械用柴油機 技術條件 | |
| JB/T 4198.2-1999 | 工程機械用柴油機 性能試驗方法 | |
| JB/T 50063-2000 | 柴油機噴油泵供油角度自動提前器總成可靠性 評定方法、試驗方法、故障分類及判定規則 | |
| JB/T 50188-1999 | 工程機械用柴油機 可靠性、耐久性試驗方法 | |
| JB/T 5081-1991 | 中小功率柴油機排氣消聲器 技術條件 | |
| JB/T 5085-1991 | 柴油機水冷卻器 技術條件 | |
| JB/T 51127-1999 | 中小功率柴油機 產品可靠性考核 | |
| JB/T 5175-2006 | 柴油機噴油泵、噴油器總成 主要零件金相檢驗 | Metallographic examination of diesel fuel injection pump and assemblies of nozzle and holder |
| JB/T 5239-1991 | 柴油機紙質濾芯柴油濾清器總成 技術條件 | |
| JB/T 5240-1991 | 柴油機柴油濾清器紙質濾芯 技術條件 | |
| JB/T 6009-1992 | 小功率柴油機水箱 技術條件 | |
| JB/T 6013-2000 | 柴油機低壓金屬油管 技術條件 | |
| JB/T 6014-2000 | 柴油機高壓油管 技術條件 | |
| JB/T 6015-2000 | 柴油機低壓輸油膠管 技術條件 | |
| JB/T 6293-2006 | 柴油機 噴油器試驗 手壓式噴油器校驗器 | Diesel engines-Testing of fuel injectors Hand-lever operated testing and setting apparatus |
| JB/T 6665.1-1993 | 輕小型柴油機—泵直聯機組 型式與基本參數 | |
| JB/T 6665.2-1993 | 輕小型柴油機—泵直聯機組 技術條件 | |
| JB/T 7173.1-2004 | 柴油機噴油泵柱塞偶件 技術條件 | |
| JB/T 7173.2-2004 | 柴油機噴油泵柱塞偶件 性能試驗方法 | |
| JB/T 7174.1-2004 | 柴油機噴油泵出油閥偶件 技術條件 | |
| JB/T 7174.2-2004 | 柴油機中驅動離心點火泵用電池接頭標準 | Standard for battery contactors for use in diesel engines driving centrifugal fire pumps |
| JB/T 7296-2004 | 柴油機噴油嘴偶件 技術條件 | |
| JB/T 7297-2004 | 柴油機噴油嘴偶件 性能試驗方法 | |
| JB/T 7661-2004 | 柴油機油泵油嘴產品清潔度 限值及測定方法 | |
| JB/T 7761.1-2004 | 柴油機噴油泵供油角度自動提前器 技術條件 | |
| JB/T 7761.2-2004 | 柴油機噴油泵供油角度自動提前器 性能試驗方法 | |
| JB/T 8121-1999 | 柴油機噴油泵試驗臺用高壓油管組件 | |
| JB/T 8122-1999 | 柴油機 柴油濾清器 試驗方法 | Diesel engines - Fuel filters - Test method |
| JB/T 8580-1997 | 柴油機用氮化硅電熱塞技術條件 | |
| JB/T 8818-1998 | 柴油機噴油器總成 技術條件 | |
| JB/T 8819-1998 | 柴油機燃油噴射裝置產品型號編制方法 | |
| JB/T 8895-1999 | 中小功率柴油機 通用技術條件 | |
| JB/T 9729-1999 | 柴油機噴油泵柱塞偶件、出油閥偶件、噴油嘴偶件徑部密封值樣品 技術條件 | |
| JB/T 9730-1999 | 柴油機噴油嘴偶件、噴油泵柱塞偶件、噴油泵出油閥偶件 金相檢驗 | |
| JB/T 9731.1-1999 | 柴油機噴油泵凸輪軸 技術條件 | |
| JB/T 9731.2-1999 | 柴油機噴油泵凸輪軸 軸端尺寸 | |
| JB/T 9751-1999 | 柴油機 液壓調速器 技術條件 | |
| JB/T 9773.1-1999 | 柴油機 臺架試驗考核方法 | |
| JB/T 9773.2-1999 | 柴油機 起動性能試驗方法 | |
| JIS A8501-1994 | 柴油機打樁汽錘規范的標準格式 | Standard form of specifications of diesel pile hammers |
| JIS B8014-1999 | 恒速柴油機的試驗方法 | Methods of test for constant speed diesel engines |
| JIS D1101-1985 | 柴油機排煙測定 | Diesel engine smoke measurement |
| JIS D3608-1999 | 柴油機.噴油泵和輪轂軸末端錐度 | Diesel engines -- Tapers for shaft ends of fuel injection pumps and hubs |
| JIS D3632-1999 | 道路車輛.柴油機燃油噴嘴體的形狀和尺寸.規格P | Road vehicles -- Shapes and dimensions of fuel injection nozzle holders for diesel engines -- Size "P" |
| JIS D3636-2003 | 道路車輛.柴油機燃料噴射泵試驗.樞軸型校準噴嘴 | Road vehicles -- Diesel fuel injection equipment testing -- Pintle type calibrating nozzle |
| JIS D8004-1986 | 汽車柴油機反射型煙度計 | Reflection type smokemeters for automobile diesel engine |
| JIS D8005-1973 | 汽車柴油機排煙測量用消光式煙度計 | Light extinction type smokemeters for measuring automotive diesel exhaust |
| JIS F0407-1998 | 造船.柴油機拖動的船舶發動機室的通風.設計要求和計算依據 | Shipbuilding -- Engine-room ventilation in diesel-engined ships -- Design requirements and basis of calculations |
| MT 990-2006 | 礦用防爆柴油機通用技術條件 | |
| MT/T 588-1996 | 煤礦用防爆柴油機膠套輪/齒軌卡軌車技術條件 | |
| MT/T 589-1996 | 煤礦用防爆柴油機鋼輪/齒軌機車及齒軌裝置 | |
| MT/T 921-2002 | 煤礦柴油機粘著與齒軌驅動卡軌車型式與參數 | |
| MT/T 989-2006 | 礦用防爆柴油機無軌膠輪車通用技術條件 | |
| NF J31-155-2002 | 造船.柴油機船的發動機室的通風.設計要求和計算依據 | Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations. |
| NF M07-070-1993 | 液體燃料.柴油機和家用供暖設備的燃料.用浸漬帶試驗查找需氧微生物 | LIQUID FUELS. FUELS FOR DIESEL ENGINES AND DOMESTIC HEATING INSTALLATIONS. SEARCH FOR AEROBIC MICRO-ORGANISM USING THE IMMERSED STRIP TEST. |
| NF R16-309-1988 | 噴油咀.柴油機用S型 | Road vehicles. Fuel injection nozzles. Size “S“. |
| prEN ISO 20844-2002 | 石油及石油產品 用柴油機噴嘴測定含聚合物油類的剪切穩定性 | Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle (ISO/DIS 20844:2002) |
| QC/T 471-2006 | 汽車柴油機技術條件 | Specifications for auto diesel engines |
| QC/T 508-1999(2005) | 汽車柴油機用噴油泵總成技術條件 | |
| QC/T 509-1999(2005) | 汽車柴油機噴油泵柱塞偶件技術條件 | |
| QC/T 510-1999(2005) | 汽車柴油機噴油泵出油閥偶件技術條件 | |
| QC/T 511-1999(2005) | 汽車柴油機噴油器針閥偶件技術條件 | |
| QC/T 512-1999(2005) | 汽車柴油機用噴油泵及噴油器清潔度測定方法及限值 | |
| QC/T 540-1999(2005) | 汽車柴油機"S"尺寸的2型法蘭或壓板安裝噴油器體 | |
| QC/T 541-1999(2005) | 汽車柴油機"S"尺寸的Ⅱ型法蘭或壓板安裝噴油器體 | |
| QC/T 542-1999(2005) | 汽車柴油機"S"尺寸的5型和6型法蘭或壓板安裝噴油器體 | |
| QC/T 543-1999(2005) | 汽車柴油機"S"尺寸的Ⅰ型螺紋安裝噴油器體 | |
| QC/T 590-1999(2005) | 汽車柴油機渦輪增壓器技術條件 | |
| QC/T 591-1999(2005) | 汽車柴油機渦輪增壓器試驗方法 | |
| QC/T 767-2006 | 汽車 柴油機旋裝式燃油濾清器 安裝和連接尺寸 | |
| QC/T 771-2006 | 汽車柴油機紙質濾芯柴油細濾器總成技術條件 | Specifications of diesel-fuel fine filter assembly with paper element for automotive diesels |
| SH/T 0075-1991(2006年確認) | CC級柴油機油高溫清凈性評定法（1135C2法） | |
| SH/T 0261-1992(2006年確認) | CD級柴油機油高溫清凈性評定法（1135D2法） | |
| SH/T 0577-1993(2006年確認) | 鐵路柴油機油高溫摩擦磨損性能測定法（青銅-鋼法） | |
| SH/T 0723-2002 | 柴油機油腐蝕性能評定法 | |
| SH/T 0754-2005 | 柴油機油在135℃下腐蝕性能評定法 | |
| SH/T 0760-2005 | 柴油機油性能評定法（MACK T-8法） | |
| SH/T 0761-2005 | 柴油機油性能評定法（MACK T-9法） | |
| SH/T 0764-2005 | 柴油機噴嘴結焦試驗方法（XUD-9法） | |
| SH/T 0782-2005 | 柴油機油性能評定法（開特皮勒1K/1N法） | |
| SH/T 0786-2006 | 柴油機油清靜性評定法（開特皮勒1M-PC法） | |
| SY/T 0080-93 | 油氣田柴油機發電站設計規范 | |
| SY/T 5030-2006 | 石油天然氣工業用柴油機 | The diesel engine for the petroleum and natrual gas industry |
| SY/T 5142-1995 | 石油鉆機用190系列柴油機大修理技術條件 | |
| SY/T 5640-93 | 柴油機計時器技術條件 | |
| SY/T 6187-1997 | 石油鉆機用190系列柴油機使用報廢條件 | |
| SY/T 6187-1997(2005) | 石油鉆機用190系列柴油機使用報廢條件 | |
| SY/T 6664-2006 | 石油鉆機用柴油機偶合器機組 | Diesel hydraulic coupling set for oil drilling rig |
| UL 1247-1995 | 防火離心泵驅動用柴油機 | Diesel engines for driving centrifugal fire pumps |
| YS/T 210-1994(2005) | 柴油機排氣凈化球型鉑催化劑 | |