| 編號 | 中文名稱 | 英文名稱 |
|---|
| ANSI Z21.23-2000
| 煤氣器具恒溫器
| Gas Appliance Thermostats
|
| ANSI Z21.23-2000 and ANSI Z 21.23a-2003
| 燃?xì)馄骶吆銣仄? | Gas Appliance Thermostats
|
| ANSI Z21.23b-2005
| 燃?xì)馄骶吆銣仄? | Gas Appliance Thermostats
|
| ANSI/AAMI II36-2004
| 嬰兒恒溫箱
| Infant Incubators
|
| ANSI/ARI 750-2001
| 制冷劑恒溫膨脹閥
| Thermostatic Refrigerant Expansion Valves
|
| ANSI/ASTM B753-2001
| 恒溫組份合金規范
| Specification for Thermostat Component Alloys
|
| ASTM B 106-1996
| 恒溫金屬撓性的標準試驗方法
| Standard Test Methods for Flexivity of Thermostat Metals
|
| ASTM B 223-2003
| 恒溫金屬?gòu)椥阅Ａ康臉?biāo)準試驗方法(懸臂梁法)
| Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)
|
| ASTM B 362-1991
| 恒溫雙金屬制螺旋線圈的機械扭轉率的試驗方法
| Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
|
| ASTM B 389-1981
| 恒溫雙金屬螺旋形線圈的熱偏轉率的標準試驗方法
| Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
|
| ASTM B 478-1985
| 恒溫雙金屬橫向彎曲率的測試方法
| Test Method for Cross Curvature of Thermostat Metals
|
| ASTM B 753-2001
| 恒溫器組件用合金標準規范
| Standard Specification for Thermostat Component Alloys
|
| ASTM D 1989-1997
| 用微處理機控制的恒溫量熱器測量煤和焦炭總熱值的試驗方法
| Test Method for Gross Calorific Value of Coal and Coke by Microprocessor Controlled Isoperibol Calorimeters
|
| ASTM E 1292-1994
| 重力對流和強制通風恒溫箱
| Standard Specification for Gravity Convection and Forced Ventilation Incubators
|
| ASTM E 487-2004
| 化學材料的恒溫穩定性的標準試驗方法
| Standard Test Method for Constant-Temperature Stability Of Chemical Materials
|
| BS 7478-1991
| 恒溫散熱器閥的選擇和使用指南
| Guide to selection and use of thermostatic radiator valves
|
| BS 7942-2000
| 檢修機構用恒溫混合閥
| Thermostatic mixing valves for use in care establishments
|
| BS EN 1111-1999
| 衛生用具龍頭.恒溫混合閥(PN10).一般技術規范
| Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
|
| BS EN 1287-1999
| 衛生排水塞.低壓恒溫混合閥.一般技術規范
| Sanitary tapware - Low pressure thermostatic mixing valves - General technical specifications
|
| BS EN 215-2004
| 恒溫散熱器控制閥.要求和試驗方法
| Thermostatic radiator valves - Requirements and test methods
|
| BS EN 257-1992
| 燃?xì)馄骶哂脵C(jī)械恒溫器
| Mechanical thermostats for gas-burning appliances
|
| BS EN ISO 9046-2005
| 建筑施工.連接產品.恒溫下密封劑的粘附/粘結性能的測定
| Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature
|
| DIN 1715-1-1983
| 恒溫器用金屬.交貨技術條件
| Thermostat metals; technical delivery conditions
|
| DIN 1715-2-1983
| 恒溫器用金屬.熱曲率比的檢驗
| Thermostat metals; testing the specific thermal curvature
|
| DIN 51900-2-2003
| 固體和液體燃料檢驗.用彈式量熱計測定總熱值和計算凈熱值.第2部分:恒溫環境或固定套量熱計法
| Testing of solid and liquid fuels - Determination of the gross calorific value by the bomb calorimeter and calculation of the net calorific value - Part 2: Method using isoperibol ot static, jacket calorimeter
|
| DIN 58945-1-1971
| 微生物產品用恒溫箱.第1部分:術語、要求、使用
| Incubators for microbiological purposes; terms, requirements, use
|
| DIN 58945-2-1971
| 微生物產品用恒溫箱.第2部分:檢驗
| Incubators for microbiological purposes; testing
|
| DIN EN 1111-1998
| 衛生設備管件.恒溫混合閥(PN 10).通用技術規范
| Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification; German version EN 1111:1998
|
| DIN EN 1287-1999
| 衛生器具管件.低壓恒溫混合閥.通用技術規范
| Sanitary tapware - Low pressure thermostatic mixing valves; general technical specification; German version EN 1287:1999
|
| DIN EN 215-2006
| 恒溫散熱器閥.要求和試驗方法
| Thermostatic radiator valves - Requirements and test methods; German version EN 215:2004 + A1:2006
|
| DIN EN 2591-615-2002
| 航空航天系列.光電連接件.試驗方法.第615部分:光學元件.恒溫下電纜連接完整性
| Aerospace series - Elements of electrical and optical connection; Test methods - Part 615: Optical elements; Connection integrity at temperature; German and English version EN 2591-615:2001
|
| DIN EN 2794-004-1999
| 航空航天系列.額定電流為20A至50A的單極的恒溫補償電路斷路保護開關.第004部分:UNC螺紋端子.產品標準
| Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 004: UNC thread terminals; product standard; German version EN 2794-004:1999
|
| DIN EN ISO 9046-2005
| 房屋建筑.連接產品.恒溫下密封膠的粘附/粘合性能的測定
| Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002); German version EN ISO 9046:2004
|
| EN 1287-1999
| 衛生間泄水器 低壓恒溫混合閥 通用技術規范
| Sanitary tapware - Low pressure thermostatic mixing valves - General technical specifications
|
| EN 215-1-1987+AC1-1987
| 恒溫散熱閥 第1部分：要求和試驗方法
| Thermostatic radiator valves; Part 1: Requirements and test methods
|
| EN 257-1992
| 燃?xì)馄骶哂脵C(jī)械恒溫器
| Mechanical thermostats for gas-bruning appliances
|
| EN 29046-1990
| 房層建筑 密封膠 恒溫下粘合性能的測定
| Building construction - Jointing products - Determination of adhesion/cohesion properties at constant temperatures (ISO 9046:1987)
|
| IEC 60389-1 AMD 1-1976
| 主要用于通信設備和采用類似技術的電子應用方面的恒溫開關 第1部分:一般要求和測量方法 修改1
| Thermostatic switches primarily for use in equipment for telecommunications and in electronic applications employing similar techniques. Part 1 : General requirements and measuring methods
|
| IEC 60389-1-1972
| 主要用于通信設備和采用類似技術的電子應用方面的恒溫開關 第1部分:一般要求和測量方法
| Thermostatic switches primarily for use in equipment for telecommunications and in electronic applications employing similar techniques. Part 1 : General requirements and measuring methods
|
| ISO 9046-2002
| 建筑結構.連接產品.恒溫下密封劑的粘附和粘結性能的測定
| Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature
|
| JB/T 5376-1991
| 低溫恒溫槽 技術條件
| ()
|
| JB/T 5377-1991
| 恒溫水槽 技術條件
| ()
|
| JB/T 9518-1999
| 恒溫油槽 技術條件
| ()
|
| JIS B8481-1999
| 室內恒溫器
| Room thermostats
|
| JIS F9702-1996
| 造船.裝添系統恒溫器
| Shipbuilding -- Filled system thermostats
|
| JIS H7103-2002
| Ti-Ni類形狀記憶合金絲材的恒溫拉力試驗方法
| Method of fixed temperature tensile test for wires of Ti-Ni shape memory alloys |
| JIS H7104-2002
| 形狀記憶合金螺旋彈簧的恒溫負荷試驗方法
| Method of fixed temperature load test for coil spring of shape memory alloys
|
| NF C47-110-1981
| 家用自動裝置.環境恒溫調節器
| (Automatic devices for household use. Rooms thermostats.)
|
| NF C47-120-1981
| 家用自動裝置.局部供暖設備中恒溫器的專用規則
| (Automatic devices for household use. Particular requirements on thermostats incorporated in fixed room heaters.)
|
| NF C93-450-1983
| 電子元件質量保證體系.電氣和電子設備用恒溫器.一般規定
| (Electronic components. Electrical thermostatic switches for use in electronic equipments.)
|
| NF D36-500-1992
| 燃?xì)馄骶哂脵C(jī)械式恒溫器
| (Mechanical thermostats for gas-burning appliances.)
|
| NF P52-002-1-1989
| 散熱器恒溫閥.第1部分:試驗方法的要求
| (Thermostatic radiator valves. Part 1 : requirements and test methods.)
|
| NF X15-140-2002
| 空氣濕度的測量.氣候?qū)嶒?yàn)室和恒溫室.表征和檢定
| (Measurement of air moisture - Climatic and thermostatic chambers - Characterisation and verification.)
|
| QB/T 1741-2004
| 電熱片蚊香用恒溫電加熱器
| ()
|
| prEN 1042-1995
| 塑料管道系統 聚烯烴管和/或配件間的熔接連接件 恒溫下內部壓力抵抗力的測定
| Plastics piping systems - Fusion joints between polyolefin pipes and/or fittings - Determination of resistance to internal pressure at constant temperature
|
| prEN 215-2-1986
| 恒溫散熱閥 第2部分：連接尺寸和細節
| Thermostatic radiator valves; part 2: dimensions and details on connection
|
| 編號 | 中文名稱 | 英文名稱 |
|---|