| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI NGV 4.8-2002 | 天然氣機車加氣站壓縮機使用導則 | Natural Gas Vehicle Fueling Station Compressor Guidelines |
| ANSI/AGMA 2011-A-1998 | 圓柱形渦輪傳動裝置公差和檢驗方法 | Cylindrical Wormgearing Tolerance and Inspection Methods |
| ANSI/AGMA 2111-A-1998 | 圓柱形渦輪傳動裝置公差和檢驗方法(米制) | Cylindrical Wormgearing Tolerance and Inspection Methods (Metric) |
| ANSI/AGMA 6006-2004 | 風力渦輪機齒輪箱的設計和規范 | Design and Specification of Gearboxes for Wind Turbines |
| ANSI/AGMA 6017-E-1986 | 一次和多次縮減的雙箱渦輪和螺旋渦輪的應用和評定 | Rating and Application of Single and Multiple Reduction Double-Enveloping Worm and Helical Worm |
| ANSI/AGMA 6022-C-1993 | 圓柱形渦輪傳動裝置的設計手冊 | Design Manual for Cylindrical Wormgearing |
| ANSI/AGMA 6030-C-1987 | 工業雙箱渦輪傳動裝置的設計 | Design of Industrial Double-Enveloping Wormgears |
| ANSI/AGMA 6034-B-1992 | 封閉的圓柱形渦輪減速器和齒輪電動機的操作規程 | Practice for Enclosed Cylindrical Wormgear Speed Reducers and Gearmotors |
| ANSI/API 612(ISO 10437-2003)-2005 | 石油、石化和天然氣工業.蒸汽渦輪.專用設施 | Petroleum, Petrochemical and Natural Gas Industries - Steam Turbines - Special-Purpose Applications |
| ANSI/API 612-2005 | 石油、石化和天然氣行業-蒸汽渦輪－專用 | Petroleum, Petrochemical and Natural Gas Industries - Steam Turbines - Special-Purpose Applications |
| ANSI/ASME MFC-4M-1986 | 用渦輪儀測量氣體流量 | Measurement of Gas Flow by Turbine Meters |
| ANSI/ASME PTC10-1998 | 性能測試規范.壓縮機及排氣機 | Performance Test Code - Compressors and Exhausters |
| ANSI/ASME PTC18-2002 | 水輪機和泵.渦輪機 | Hydraulic Turbines and Pump - Turbines |
| ANSI/ASME PTC29-2005 | 水力渦輪發電機組的速度調節系統 | Speed Governing Systems for Hydraulic Turbine Generators Units |
| ANSI/ASME PTC42-1988 | 風力渦輪機 | Wind Turbines |
| ANSI/ASME PTC6.2-2004 | 聯合循環蒸汽渦輪機 | Steam Turbines in Combined Cycles |
| ANSI/ASTM A768-1996 | 渦輪機轉子及軸用經真空處理的12/T%鉻合金鋼鍛件規范 | Specification for Vacuum-Treated 12/T% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts |
| ANSI/ASTM A940-1996 | 渦輪轉子用差溫?zé)崽幚碚婵仗幚礓撳懠⒑辖鹨?guī)范 | Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors |
| ANSI/ASTM D1322-1997 | 航空渦輪燃油煙點測試方法(05.01) | Smoke Point of Aviation Turbine Fuels, Method of Test for (05.01) |
| ANSI/ASTM D1740-1996 | 航空渦輪機燃料光度計數目測試方法(05.01) | Test Method for Luminometer Numbers of Aviation Turbine Fuels (05.01) |
| ANSI/ASTM D1840-2004 | 用紫外線分光光度測定法測定航空渦輪燃料中環烷屬烴的試驗方法(05.01) | Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry, Method of Test for (05.01) |
| ANSI/ASTM D2272-2002 | 用旋轉式儲氣瓶測定蒸氣渦輪機油氧化穩定性的標準試驗方法(05.01) | Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel |
| ANSI/ASTM D2532-2004 | 低溫靜止后飛機燃?xì)鉁u輪發動機潤滑劑的粘度和粘度變化的試驗方法 | Viscosity and Viscosity Change after Standing at Low Temperature of Aircraft Turbine Lubricants, Method of Test for (05.01) |
| ANSI/ASTM D3227-2004 | 汽油、煤油、航空渦輪和餾出燃料中硫醇含量的試驗方法(電勢滴定法) | Mercaptan Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method), Method of Test for (05.02) |
| ANSI/ASTM D3240-2005 | 航空渦輪燃料在水中不溶解度的測試方法 | Test Method for Undissolved Water in Aviation Turbine Fuels |
| ANSI/ASTM D3241a-2005 | 航空燃?xì)鉁u輪機燃料熱氧化穩定性的試驗方法(JFTOT程序) | Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ANSI/ASTM D3242-2005 | 航空渦輪燃料酸度測試方法 | Test Method for Acidity in Aviation Turbine Fuel |
| ANSI/ASTM D3602-1990 | 航空渦輪燃料的水分離特性試驗(現場試驗)(05.02) | Water Separation Characteristics of Aviation Turbine Fuels (Field Test), Test for (05.02) |
| ANSI/ASTM D3603-1993 | 在有水的情況下蒸氣渦輪油的防銹特性試驗方法(臥式圓盤法)(05.02) | Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method), Test for (05.02) |
| ANSI/ASTM D3605-2005 | 用原子吸收和火焰發射光譜法測定燃?xì)鉁u輪機燃料中痕量金屬的試驗方法 | Test Method for Trace Metals in Gas Turbine Fuels by Atomic ABSorption and Flame Emission Spectroscopy |
| ANSI/ASTM D3701-2001 | 低分辨核磁共振光譜法測定航空渦輪機燃料中氫含量的試驗方法 | Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry (05.02) |
| ANSI/ASTM D3703-1999 | 航空渦輪機燃料過氧化值試驗(05.02) | Peroxide Number of Aviation Turbine Fuels, Test for (05.02) |
| ANSI/ASTM D3948-2005 | 利用便攜式分離儀測定航空渦輪機燃料中水分離的試驗方法 | Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer |
| ANSI/ASTM D4054-1993 | 添加劑與航空渦輪機燃料和飛機燃油系統材料相容性的評價 | Evaluating the Compatability of Additives with Aviation Turbine Fuels and Aircraft Fuel System Materials (05.02) |
| ANSI/ASTM D4248-1999 | 蒸汽渦輪發電機油路系統設計(05.02) | Design of Steam Turbine Generator Oil Systems (05.02) |
| ANSI/ASTM D4293-1983 | 渦輪機潤滑用磷酸鹽酯基液體規范 | Phosphate Ester Based Fluids for Turbine Lubrication, Specification for (05.02) |
| ANSI/ASTM D5001-2004 | 用汽缸上球式(BOCLE)潤滑性評定儀測量航空渦輪機燃料潤滑性的試驗方法 | Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (Bocle) (05.03) |
| ANSI/ASTM D5186-2003 | 超臨界流體色譜法測定柴油燃料和航空燃?xì)鉁u輪燃料中芳香烴含量和多核芳香烴的試驗方法 | Test Method for the Determination of the Aromatic Content and Polynuclear of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography |
| ANSI/ASTM D5677-2005 | 用于航空噴氣機渦輪燃料的玻璃纖維(玻璃纖維加固熱硬化樹脂)管與管件規范.粘合劑粘接接頭型 | Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines |
| ANSI/ASTM D5677-2005 | 用于航空噴氣機渦輪燃料的玻璃纖維(玻璃纖維加固熱硬化樹脂)管與管件規范.粘合劑粘接接頭型 | Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines |
| ANSI/ASTM D5846-2002 | 液壓流體和渦輪機油的一般氧化試驗方法 | Test Method for Universal Oxidation Test for Hydraulic Fluids and Turbine Oils |
| ANSI/ASTM D5862-2004 | 二沖程循環渦輪增壓6v92ta柴油發動機機油評價的試驗方法 | Test Method for Evaluation of Engine Oils in the Two-Stroke Cycle Turbo-Supercharged 6v92ta Diesel Engine |
| ANSI/ASTM D6439-2005 | 蒸汽、氣體和水電渦輪潤滑系統的清潔、沖洗和純化指南 | Guide for Cleaning, Flushing and Purification of Steam, Gas and Hydroelectric Turbine Lubrication Systems |
| ANSI/ASTM D6447-2004 | 用伏安測量分析法測定航空渦輪燃料的氫過氧化物值的試驗方法 | Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis |
| ANSI/ASTM D6615-2006 | 噴射B類寬餾分航空渦輪燃料規范 | Specification for Jet B Wide-Cut Aviation Turbine Fuel |
| ANSI/ASTM D6728-2001 | 采用旋轉圓盤電極原子發射光譜法測定氣體渦輪機和柴油機燃料雜質的試驗方法 | Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry |
| ANSI/ASTM D6811-2002 | 湍流條件下測量航空器渦輪機燃料熱穩定性的試驗方法 | Test Method of Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HIRETS Method) |
| ANSI/ASTM D6812b-2004 | 渦輪增壓/增壓式火花點火式飛行器發動機的地面站辛烷值法實施規程 | Practice for Ground-based Octane Rating Procedures for Turbocharged/supercharged Spark Ignition Aircraft Engines |
| ANSI/ASTM D6824-2004 | 測定航空渦輪機燃料的可濾性的試驗方法 | Test Method for Determining Filterability of Aviation Turbine Fuel |
| ANSI/ASTM D6894-2003 | 直接噴射式渦輪增壓汽車柴油發動機的機油的抗混氣性能的評價試驗方法 | Test Method for Evaluation of the Aeration Resistance of Engine Oils in a Direct-injected Turbocharged Automotive Diesel Engine |
| ANSI/ASTM D7058-2004 | 用便攜式可見光譜測定儀評估航空渦輪燃料和煤油的賽波特顏色和測定紅色染料濃度的標準試驗方法 | Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer1 |
| ANSI/ASTM D7224-2006 | 利用便攜式分離器測定煤油型航空渦輪機燃料水分離特性的試驗方法 | Test Method for Determining Water Separation characteristics of Kerosene-type Aviation Turbine Fuels Containing Additives by Portable Separometer |
| ANSI/ASTM F1692-2001 | 家庭中央真空吸塵系統渦輪動力噴嘴壽命評估試驗方法 | Test Method for Life Evaluation of aTurbine Powered Nozzle for Household Central Vacuum Cleaning Systems |
| ANSI/AWWA C701-2002 | 家用渦輪式冷水表 | Cold Water Meters - Turbine Type for Customer Service |
| ANSI/IEEE 1207-2004 | 水力發電裝置用渦輪控制系統的應用指南 | Guide for the Application of Turbine Governing Systems for Hydroelectric Generating Units |
| ANSI/IEEE 67-2005 | 渦輪發電機的操作和維護指南 | Guide for the Operation and Maintenance of Turbine Generators |
| ASME B133.9-1994 | 固定式燃?xì)鉁u輪內機的廢氣排放測量 | (Measurement of exhaust emissions from stationary gas turbine engines) |
| ASME PTC 22-1997 | 燃?xì)鉁u輪機的性能試驗規則 | (Performance test code on gas turbines) |
| ASME PTC 42-1988 | 風力渦輪機 | (Wind turbines) |
| ASTM A 288-1991 | 渦輪發電機磁性定位環用碳素鋼和合金鋼鍛件 | Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators |
| ASTM A 418/A 418M-2005 | 渦輪機及發電機鋼轉子鍛件超聲波檢驗的標準試驗方法 | Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings |
| ASTM A 470/A 470M-2005 | 渦輪轉子和軸用經真空處理的碳素鋼和合金鋼鍛件的標準規范 | Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts |
| ASTM A 472/A 472M-2005 | 蒸汽渦輪機軸及轉子鍛件熱穩定性的標準試驗方法 | Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings |
| ASTM A 531/A 531M-1991 | 渦輪發電機鋼定位環的超聲波檢驗 | Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings |
| ASTM A 768/A 768M-2005 | 渦輪機轉子及軸用經真空處理的含鉻12%的合金鋼鍛件的標準規范 | Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts |
| ASTM A 891-1998 | 渦輪機轉子圓盤和輪用沉淀硬化鐵基超合金鋼鍛件的標準規范 | Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels |
| ASTM A 982/A 982M-2005 | 壓縮機和渦輪機翼片用不銹鋼鍛件的標準規范 | Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils |
| ASTM ANS/IEC 60601.2.12-2001 | 醫療電氣設備.第2-12部分:肺部通氣機安全的特殊要求.與美國國家標準有偏差的ASTM國際標準認可的急救用通氣 | Medical Electrical Equipment - Part 2-12; Particular Requirements for the Safety of Lung Ventilators - Critical Care Ventilators Approved as an American National Standard with Deviations by ASTM International |
| ASTM B 66-1995 | 蒸氣機車易損部件用青銅鑄件的標準規范 | Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts |
| ASTM D 1322-1997 | 煤油和航空渦輪機燃料煙點的標準試驗方法 | Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel |
| ASTM D 1740-2001 | 航空渦輪機燃料發光計值的標準試驗方法 | Standard Test Method for Luminometer Numbers of Aviation Turbine Fuels |
| ASTM D 1840-2003 | 紫外線分光光度法測定航空渦輪機燃料中萘烴的標準試驗方法 | Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry |
| ASTM D 3227a-2004 | 電位差法測定汽油、煤油、航空渦輪機燃料及餾分燃料中硫醇態硫含量的標準試驗方法 | Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method) |
| ASTM D 3240-2005 | 航空渦輪機燃料中不溶解水的標準試驗方法 | Standard Test Method for Undissolved Water In Aviation Turbine Fuels |
| ASTM D 3242-2005 | 航空渦輪機燃料酸度的標準試驗方法 | Standard Test Method for Acidity in Aviation Turbine Fuel |
| ASTM D 3701-2001 | 低分辨核磁共振光譜法測定航空渦輪機燃料中氫含量的標準試驗方法 | Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry |
| ASTM D 3703-1999 | 測定航空燃?xì)鉁u輪發動機用燃料過氧化值的試驗方法 | Standard Test Method for Peroxide Number of Aviation Turbine Fuels |
| ASTM D 4054-1993 | 添加劑與航空渦輪機燃料和飛機燃燒體系材料相容性評價的標準實施規程 | Standard Practice for Evaluating the Compatibility of Additives with Aviation-Turbine Fuels and Aircraft Fuel System Materials |
| ASTM D 4241-1998 | 氣體渦輪發電機潤滑油系統設計的標準實施規范 | Standard Practice for Design of Gas Turbine Generator Lubricating Oil Systems |
| ASTM D 4248-1998 | 蒸氣渦輪發電機潤滑油系統設計的標準實施規范 | Standard Practice for Design of Steam Turbine Generator Oil Systems |
| ASTM D 4293-1983 | 渦輪機潤滑用磷酸酯基液體的標準規范 | Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication |
| ASTM D 4636-1999 | 液壓油、飛機渦輪發動機潤滑油和其他高精煉油的腐蝕性和氧化穩定性的試驗方法 | Standard Test Method for Corrosiveness and Oxidation qualility of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils |
| ASTM D 5001-2003 | 用汽缸上球式(BOCLE)潤滑性評定儀測量航空渦輪機燃料潤滑性的標準試驗方法 | Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE) |
| ASTM D 5186-2003 | 用超臨界流體色譜法測定柴油和航空渦輪燃料中芳香烴含量和多核芳香烴含量的標準試驗方法 | Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography |
| ASTM D 5677-2005 | 用于航空噴氣渦輪機燃料管線的膠粘劑結合型玻璃纖維(玻璃纖維增強熱固性樹脂)管及管配件標準規范 | Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines |
| ASTM D 5846-2002 | 使用通用氧化試驗設備進行液壓液和渦輪機油的通用氧化試驗的標準試驗方法 | Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus |
| ASTM D 5862-2003 | 評價二沖程循環渦輪增壓式6V92TA柴油發動機中發動機油的標準試驗方法 | Standard Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine |
| ASTM D 6447-2003 | 用伏安測量分析法測定航空渦輪機燃料中氫過氧化物值的標準試驗方法 | Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis |
| ASTM D 6615-2006 | 噴口B廣餾份航空渦輪機燃料標準規范 | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel |
| ASTM D 6810-2002 | 用線性掃描伏特計測定HL渦輪機油中的受阻礙酚型抗氧劑含量的標準試驗方法 | Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in HL Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 6811-2002 | 在快速流動條件下測定飛行器渦輪機燃料的熱穩定性的標準試驗方法 | Standard Test Method for Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HiReTS Method)1, 2 |
| ASTM D 6812a-2004 | 渦輪增壓/增壓火花點火式飛機發動機的地面辛烷值測定的標準實施規程 | Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines |
| ASTM D 6824-2004 | 測定航空渦輪機燃料可濾性的標準試驗方法 | Standard Test Method for Determining Filterability of Aviation Turbine Fuel |
| ASTM D 6894-2003 | 直噴式渦輪增壓汽車柴油發動機中機油透氣阻力評價的標準試驗方法 | Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine |
| ASTM D 6971-2004 | 用線性掃描伏安法測量無鋅渦輪機油中受阻酚和芳香胺抗氧化劑含量的標準試驗方法 | Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry |
| ASTM D 7058-2004 | 用便攜式可視分光光度儀評估航空渦輪機燃料和煤油的賽波特色彩和測定紅色染料的濃度的標準試驗方法 | Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer |
| ASTM D 7223-2005 | 航空認證渦輪機燃料標準規范 | Standard Specification for Aviation Certification Turbine Fuel |
| ASTM D 7224-2005 | 便攜式分離儀測定含添加劑的煤油型航空渦輪機燃料脫水性能標準試驗方法 | Standard Test Method for Determining Water Separation Characteristics of Kerosine-type Aviation Turbine Fuels Containing Additives by Portable Separometer |
| ASTM E 2104-2001 | 高級航空渦輪機材料和元件的放射性檢驗的標準實施規程 | Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components |
| ASTM F 1692-2001 | 家用中央真空除塵系統用渦輪動力排氣管壽命評定的標準試驗方法 | Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems |
| ASTM IEC 60601.2.12-2001 | 醫療電氣設備.第2-12部分:肺通氣機安全的特殊要求.臨床護理用通氣機 | Medical Electrical Equipment - Part 2-12; Particular Requirements for the Safety of Lung Ventilators - Critical Care Ventilators |
| BS 1571-2-1975 | 容積式壓縮機與排氣機的試驗.第2部分:空氣壓縮機與排氣機的簡化驗收方法 | Specification for testing of positive displacement compressors and exhausters - Methods for simplified acceptance testing for air compressors and exhausters |
| BS 2000-280-1999 | 石油及其產品的試驗方法.石油產品和潤滑劑.抗氧化劑渦輪機礦物油.氧化穩定性的測定 | Methods of test for petroleum and its products - Petroleum products and lubricants - Inhibited mineral turbine oils - Determination of oxidation stability |
| BS 489-1999 | 渦輪機潤滑劑規范 | Specification for turbine lubricants |
| BS 5860-1980 | 水輪機、蓄水泵及渦輪泵的效率測定方法(熱力學法) | Method for measuring the efficiency of hydraulic turbines, storage pumps and pump-turbines (thermodynamic method) |
| BS 6413-5-1988 | 潤滑油、工業用油和有關產品(L級).第5部分:系列T的分類(渦輪) | Lubricants, industrial oils and related products (class L) - Classification for family T (turbines) |
| BS 7721-1994 | 燃?xì)鉁u輪機及其裝置.空氣傳播噪聲的測量.工程/測量方法 | Gas turbines and gas turbine sets - Measurement of emitted airborne noise - Engineering/survey method |
| BS 7834-1995 | 密閉管道氣流測量用渦輪表規范 | Specification for turbine meters used for the measurement of gas flow in closed conduits |
| BS 7924-1999 | 用于礦中沼氣敏感的經檢定的電氣機械檢修和翻修的實施規程 | Code of practice for the repair and overhaul of certified electrical apparatus intended for use in mines susceptible to firedamp |
| BS EN 12261-2002 | 煤氣表.渦輪式煤氣表 | Gas meters - Turbine gas meters |
| BS EN 13684-2004 | 園藝設備.可以在側面步行操縱的通氣機和松土機.安全 | Garden equipment - Pedestrian controlled aerators and scarifiers - Safety |
| BS EN 13996-2002 | 表面活性劑.發泡能力和防沫能力.渦輪攪拌法 | Surface active agents - Foaming power and antifoaming power - Turbine stirring method |
| BS EN 45510-5-3-1998 | 發電站設備采購指南.風力渦輪機 | Guide for the procurement of power station equipment - Wind turbines |
| BS EN 45510-6-1-1998 | 發電站設備采購指南.渦輪機輔助設備.空氣分離器 | Guide for the procurement of power station equipment - Turbine auxiliaries - Deaerators |
| BS EN 45510-6-2-1998 | 發電站設備采購指南.渦輪機輔助設備.給水加熱器 | Guide for the procurement of power station equipment - Turbine auxiliaries - Feedwater heaters |
| BS EN 45510-6-3-1998 | 發電站設備采購指南.渦輪機輔助設備.冷凝器設備 | Guide for the procurement of power station equipment - Turbine auxiliaries - Condenser plant |
| BS EN 45510-6-4-2000 | 發電站設備采購指南.渦輪機輔助設備.泵 | Guide for the procurement of power station equipment - Turbine auxiliaries - Pumps - Pumps |
| BS EN 45510-6-5-2000 | 發電站設備采購指南.渦輪機輔助設備.干式冷卻系統.第5節:干式冷卻系統 | Guide for the procurement of power station equipment - Turbine auxiliaries - Dry cooling systems - Section 5: Dry cooling systems |
| BS EN 45510-6-6-2000 | 發電站設備采購指南.渦輪機輔助設備.濕式和濕/干式冷卻塔.第6節:濕式和濕/干式冷卻塔 | Guide for the procurement of power station equipment - Turbine auxiliaries - Turbine auxiliaries - Wet and wet/dry cooling towers - Section 6: Wet/dry cooling towers |
| BS EN 45510-6-7-1998 | 發電站設備采購指南.渦輪機輔助設備.潮氣分離再加熱器 | Guide for the procurement of power station equipment - Turbine auxiliaries - Moisture separator reheaters |
| BS EN 45510-6-8-2000 | 發電站設備采購指南.渦輪機輔助設備.起重機.第8節:起重機 | Guide for the procurement of power station equipment - Turbine auxiliaries - Cranes - Section 8: Cranes |
| BS EN 45510-6-9-2000 | 發電站設備采購指南.渦輪機輔助設備.冷卻水系統.第9節:冷卻水系統 | Guide for the procurement of power station equipment - Turbine auxiliaries - Cooling water systems - Section 9: Cooling water systems |
| BS EN 60041-1995 | 水輪機,現場驗收試驗測定蓄水泵和渦輪泵液壓性能 | Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines |
| BS EN 61221-2004 | 石油產品及潤滑劑.三芳基磷酸酯渦輪機控制液(ISO-L-TCD類).規范 | Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications |
| BS EN 61362-1998 | 液壓渦輪控制系統規范指南 | Guide to specification of hydroturbine control systems |
| BS EN 61400-11-2003 | 風力渦輪發電機系統.噪音測量技術 | Wind turbine generator systems - Acoustic noise measurement techniques |
| BS EN 62196-1-2004 | 電氣機車輸入端和機車連接器用插頭和插座.電氣機車傳導沖電.250A交流和400A直流及以下的電氣機車充電 | Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles - Charging of electric vehicles up to 250 A a.c. and 400 A d.c |
| BS EN 794-3-1999 | 肺呼吸機.急救和運送用的通氣機的特殊要求 | Lung ventilators - Particular requirements for emergency and transport ventilators |
| BS EN ISO 10651-2-2004 | 醫用肺通氣機.基本安全和性能的特殊要求.通氣機依賴型病人用家庭護理通氣機 | Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Home care ventilators for ventilator-dependent patients |
| BS EN ISO 10651-4-2002 | 肺換氣機.對操作人員控制的復蘇器的特殊要求 | Lung ventilators - Particular requirements for operator-powered resuscitators |
| BS EN ISO 10651-6-2004 | 醫用肺通氣機.基本安全和性能的特殊要求.家庭保健通氣機支撐裝置 | Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Home-care ventilatory support devices |
| BS EN ISO 7785-1-1999 | 手持式牙科器械.高速空氣渦輪鉆頭 | Dental handpieces - High-speed air turbine handpieces |
| BS EN ISO 9906-2000 | 渦輪式泵.液壓性能驗收試驗.1和2級 | Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2 |
| BS G 102-1971 | 轉動電氣機械的一般要求規范 | Specification for general requirements for rotating electrical machinery |
| BS IEC 60609-2-1998 | 水輪機、蓄能泵和水泵渦輪機空穴評估.水戽式水輪機的評估 | Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump turbines - Evaluation in Pelton turbines |
| BS IEC 61366-1-1998 | 水輪機、蓄能泵和水泵渦輪.投標文件.綜述及附錄 | Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - General and annexes |
| BS IEC 61366-2-1998 | 水輪機、蓄能泵和水泵渦輪.投標文件.弗蘭西斯渦輪機技術規范指南 | Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for Francis turbines |
| BS IEC 61366-3-1998 | 水輪機、蓄能泵和水泵渦輪.投標文件.水戽式水輪機的技術規范指南 | Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for Pelton turbines |
| BS IEC 61366-4-1998 | 水輪機、蓄能泵和水泵渦輪.投標文件.卡普蘭式水輪機和推進式水輪機的技術規范指南 | Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for Kaplan and propeller turbines |
| BS IEC 61366-5-1998 | 水輪機、蓄能泵和水泵渦輪.投標文件.管狀水輪機技術規范指南 | Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for tubular turbines |
| BS IEC 61366-6-1998 | 水輪機、蓄能泵和水泵渦輪.投標文件.水泵渦輪技術規范指南 | Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for pump-turbines |
| BS IEC 61366-7-1998 | 水輪機、蓄能泵和水泵渦輪.投標文件.蓄水泵技術規范指南 | Hydraulic turbines, storage pumps, and pump turbines - Tendering documents - Guidelines for technical specifications for storage pumps |
| BS ISO 12097-3-2003 | 道路車輛.氣囊零部件.充氣機組件的檢驗 | Road vehicles - Airbag components - Testing of inflator assemblies |
| BS ISO 14661-2000 | 工業用熱渦輪機(蒸氣渦輪機、氣體膨脹式輪機).一般要求 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) - General requirements |
| BS ISO 15911-2001 | 石油及其制品的試驗方法.采用氫含量數據對航空渦輪發動機燃料凈單位能量的評估 | Methods of test for petroleum and its products - Estimation of net specific energy of aviation turbine fuels using hydrogen content data |
| BS ISO 5389-2006 | 渦輪壓縮機.性能試驗編碼 | Turbocompressors - Performance test code |
| DD ENV 61400-1-1995 | 風力渦輪發電機系統.第1部分:安全性要求 | Wind turbine generator systems. Safety requirements |
| DIN 14426-1985 | 消防隊用輕便式渦輪潛水泵 | Portable submerged turbopump for fire brigade |
| DIN 28428-1978 | 真空技術.渦輪分子泵的驗收規則 | Vacuum technology; acceptance specifications for turbomolecular pumps |
| DIN 3017-1-1998 | 渦輪傳動軟管卡圈.A型 | Hose clamps with worm gear drive; shape A |
| DIN 42018-1981 | 家用電氣機器用排水泵.連接尺寸和檢驗 | Drain pumps for use in electric domestic machines; connection dimensions and test |
| DIN 42923-1971 | 旋轉電氣機械用滑軌 | Slide rails for rotating electrical machinery |
| DIN 42966-1961 | 電氣機械用的連桿式球軸承.公差和徑向間隙 | Ball bearings, conrad type, for electrical machines; tolerances and radial clearance |
| DIN 43044-1969 | 旋轉電氣機械用帶支架刷握.主要尺寸 | Leg-type-brush-holders for electrical machinery; main dimensions |
| DIN 4305-1-1968 | 蒸汽輪機.渦輪機組件和零件術語 | Steam turbines; terms of assemblies and parts of the turbine |
| DIN 4312-1983 | 工業式渦輪機:蒸汽機和氣體膨脹式渦輪機:工業式渦輪機建造原則 | Industrial-type turbines; steam turbines and gas expansion turbines; construction principles for industrial-type turbines |
| DIN 45635-15-1987 | 機器空氣噪聲的測量.包絡面法.熱電站用的渦輪發電機組 | Measurement of airborne noise emitted by machines; enveloping surface method; turbogenerator sets for use in thermal power stations |
| DIN 51436-1989 | 石油制品的試驗.航空渦輪機燃料中防冰凍劑含量的測定.紅外線光譜測定法 | Testing of petroleum products; determination of the content of icing inhibitors in aviation turbine fuels; infrared spectrometry |
| DIN 51535-2003 | 石油產品的試驗.發動機潤滑油在增壓柴油發動機的廢氣渦輪增壓器和中冷器中形成沉積物的趨勢測定 | Testing of petroleum products - Determination of deposition forming tendency of motor oils in exhaust turbochargers and intercoolers of supercharged diesel engines |
| DIN 85005-11-1999 | 船舶和航海技術.技術文獻的圖形符號.第11部分:渦輪 | Ships and marine technology - Graphical symbols for technical documentation - Part 11: Turbines |
| DIN EN 12261-2002 | 煤氣表.渦輪式煤氣表; 德文版本 EN 12261:2002 | Gas meters - Turbine gas meters; German version EN 12261:2002 |
| DIN EN 13684-2004 | 園藝設備.可在側面控制的草坪通氣機和松土機.安全 | Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety; German version EN 13684:2004 |
| DIN EN 45510-5-3-1998 | 發電廠設備購置說明.第5-3部分:風力渦輪機 | Guide for procurement of power station equipment - Part 5-3: Wind turbines; German version EN 45510-5-3:1998 |
| DIN EN 45510-5-4-1998 | 發電廠設備購置說明.第5-4部分:水輪機、蓄水儲能泵和泵渦輪機 | Guide for procurement of power station equipment - Part 5-4: Hydraulic turbines, storage-pumps and pump-turbines; German version EN 45510-5-4:1998 |
| DIN EN 45510-6-1-1998 | 發電廠設備購置說明.第6-1部分:渦輪機輔助設備.除氣器 | Guide for procurement of power station equipment - Part 6-1: Turbine auxiliaries; deaerators; German version EN 45510-6-1:1998 |
| DIN EN 45510-6-2-1998 | 發電廠設備購置說明.第6-2部分:渦輪機輔助設備.給水加熱器 | Guide for procurement of power station equipment - Part 6-2: Turbine auxiliaries; feedwater heaters; German version EN 45510-6-2:1998 |
| DIN EN 45510-6-3-1998 | 發電廠設備購置說明.第6-3部分:渦輪機輔助設備.冷凝設備 | Guide for procurement of power station equipment - Part 6-3: Turbine auxiliaries; condensator plant; German version EN 45510-6-3:1998 |
| DIN EN 45510-6-4-2000 | 發電廠設備購置指南.第6-4部分:渦輪機輔助設備和泵 | Guide for procurement of power station equipment - Part 6-4: Turbine auxiliaries; pumps; German version EN 45510-6-4:1999 |
| DIN EN 45510-6-5-2000 | 發電廠設備購置指南.第6-5部分:渦輪機輔助設備和干燥冷卻系統 | Guide for procurement of power station equipment - Part 6-5: Turbine auxiliaries; dry cooling systems; German version EN 45510-6-5:1999 |
| DIN EN 45510-6-6-2000 | 發電廠設備采購指南.第6-6部分:渦輪機輔助設備、濕式和濕式/干燥冷卻塔 | Guide for procurement of power station equipment - Part 6-6: Turbine auxiliaries; wet and wet/dry cooling towers; German version EN 45510-6-6:1999 |
| DIN EN 45510-6-7-1998 | 發電廠設備購置說明.第6-7部分:渦輪機輔助設備.去濕再加熱器 | Guide for procurement of power station equipment - Part 6-7: Turbine auxiliaries; Moisture separator reheaters; German version EN 45510-6-7:1998 |
| DIN EN 45510-6-8-2000 | 發電廠設備采購指南.第6-8部分:渦輪機輔助設備和起重機 | Guide for procurement of power station equipment - Part 6-8: Turbine auxiliaries; cranes; German version EN 45510-6-8:1999 |
| DIN EN 45510-6-9-2000 | 發電廠設備購置指南.第6-9部分:渦輪機輔設備和冷卻水系統 | Guide for procurement of power station equipment - Part 6-9: Turbine auxiliaries; cooling water systems; German version EN 45510-6-9:1999 |
| DIN EN 50308-2005 | 風力渦輪機.防護措施.設計、操作和維修的要求 | Wind turbines - Protective measures - Requirements for design, operation and maintenance; German version EN 50308:2004 |
| DIN EN 61221-2005 | 石油產品和潤滑劑.三芳基磷酸酯渦輪機控制液(ISO-L-TCD類).規范 | Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications (IEC 61221:2004); German version EN 61221:2004 |
| DIN EN 61400-11-2003 | 風力渦輪機發電機系統.第11部分:噪音測量技術 | Wind turbine generator systems - Part 11: Acoustic noise measurement techniques (IEC 61400-11:2002); German version EN 61400-11:2003 |
| DIN EN 61400-12-1999 | 風渦輪發電機組.第12部分:風渦輪機動力特性測試 | Wind turbine generator systems - Part 12: Wind turbines power performance testing (IEC 61400-12:1998); German version EN 61400-12:1998 |
| DIN EN 61400-2-1998 | 風力渦輪發電機組.第2部分:小型風力渦輪發電機安全性 | Wind turbine generator systems - Part 2: Safety of small wind turbines (IEC 61400-2:1996); German version EN 61400-2:1996 |
| DIN EN 61400-21-2002 | 鼓風渦輪發電機系統.第21部分:網格連接式鼓風渦輪機動力質量特性的測量和評估 (IEC 61400-21:2001); 德文版 | Wind turbine generator systems - Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines (IEC 61400-21:2001); German version EN 61400-21:2002 |
| DIN EN 794-3/A1-2005 | 肺通氣機.第3部分:應急和移動式通氣機的特殊要求 | Lung ventilators - Part 3: Particular requirements for emergency and transport ventilators; German version EN 794-3:1998/A1:2005 |
| DIN EN ISO 10651-2-2004 | 醫用肺通氣機.基本安全和性能的特殊要求.第2部分:通氣機依賴型病人用家庭保健通氣機 | Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 2: Home care ventilators for ventilator-dependent patients (ISO 10651-2:2004); German version EN ISO 10651-2:2004 |
| DIN EN ISO 10651-6-2004 | 醫療用肺通氣機.基本安全和性能的特殊要求.第6部分:家庭保健通氣機支持設備 | Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 6: Home-care ventilatory support devices (ISO 10651-6:2004); German version EN ISO 10651-6:2004 |
| DIN EN ISO 7785-1-1999 | 手持式牙科器械.第1部分:高速空氣渦輪手持器械 | Dental handpieces - Part 1: High-speed air turbine handpieces (ISO 7785-1:1997); German version EN ISO 7785-1:1999 |
| DIN ISO 10816-2-2002 | 機械振動.通過測量非旋轉部件評定機械振動.第2部分:標定運行速度1500r/min、1800r/min、3000r/min和3600r/m | Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min (ISO 10816-2:2001) |
| DIN ISO 10816-4-1998 | 機械振動.對非旋轉部件進行測量以評定機械振動.第4部分:不包括飛行器改型產品的燃?xì)鉁u輪驅動裝置 | Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 4: Gas turbine driven sets excluding aircraft derivatives (ISO 10816-4:1998) |
| DIN ISO 7919-2-2002 | 機械振動.通過測量旋轉軸評定機械振動.第2部分:標定運行速度1500r/min、1800r/min、3000r/min和3600r/min的 | Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min (ISO 7919-2:2001) |
| EN 12157-1999 | 渦輪泵 機床冷卻泵組 額定流量和尺寸 | Rotodynamic pumps - Coolant pumps units for machine tools - Nominal flow rate, dimensions |
| EN 12261-2002+AC-2003 | 氣量計 渦輪式氣量計 | Gas meters - Turbine gas meters |
| EN 13996-2002 | 表面活性劑 起泡粉未和消泡粉未 渦輪攪拌法 | Surface active agents - Foaming power and antifoaming power - Turbine stirring method |
| EN 45510-5-3-1998 | 發電站設備采購指南 第5-3部分：.風力渦輪機 | Guide for procurement of power station equipment - Part 5-3: Wind turbines |
| EN 45510-5-4-1998 | 發電站設備采購指南 第5-4部分：.水力渦輪機、水力、液力存儲器泵和渦輪泵 | Guide for procurement of power station equipment - Part 5-4: Hydraulic turbines, storage, pumps and pump-turbines |
| EN 45510-6-1-1998 | 發電站設備采購指南 第6-1部分：.渦輪機輔助設備 脫氣器 | Guide for procurement of power station equipment - Part 6-1: Turbine auxiliaries - Deaerators |
| EN 45510-6-2-1998 | 發電站設備采購指南 第6-2部分：渦輪機輔助設備 給水加熱器 | Guide for procurement of power station equipment - Part 6-2: Turbine auxiliaries - Feedwater heaters |
| EN 45510-6-3-1998 | 發電站設備采購指南 第6-3部分：渦輪機輔助設備 冷凝設備 | Guide for procurement of power station equipment - Part 6-3: Turbine auxiliaries - Condenser plant |
| EN 45510-6-4-1999 | 發電站設備采購指南 第6-4部分：渦輪機輔助設備 泵 | Guide for procurement of power station equipment - Part 6-4: Turbine auxiliaries - Pumps |
| EN 45510-6-5-1999 | 發電站設備采購指南 第6-5部分：渦輪機輔助設備 干式冷卻系統 | Guide for procurement of power station equipment - Part 6-5: Turbine auxiliaries - Dry cooling systems |
| EN 45510-6-6-1999 | 發電站設備采購指南 第6-6部分：渦輪機輔助設備 濕式和濕/干式冷卻塔 | Guide for procurement of power station equipment - Part 6-6: Turbine auxiliaries - Wet and wet/dry cooling towers |
| EN 45510-6-7-1998 | 發電站設備采購指南 第6-7部：渦輪機輔助設備 潮氣分離回?zé)釥t | Guide for procurement of power station equipment - Part 6-7: Turbine auxiliaries - Moisture separator reheaters |
| EN 45510-6-8-1999 | 發電站設備采購指南 第6-8部分：渦輪機輔助設備 起重機 | Guide for procurement of power station equipment - Part 6-8: Turbine auxiliaries - Cranes |
| EN 45510-6-9-1999 | 發電站設備采購指南 第6-9部分：渦輪機輔助設備 冷卻水系統 | Guide for procurement of power station equipment - Part 6-9: Turbine auxiliaries - Cooling water systems |
| EN 50237-1997 | 用于電氣機械保護目的的手套和連指手套 | Gloves and mitts with mechanical protection for electrical purposes |
| EN 60034-3-1995 | 旋轉電機 第3部分：渦輪型同步電機的特殊要求 | Rotating electrical machines - Part 3: Specific requirements for turbine-type synchronous machines (IEC 60034-3:1988) |
| EN 61221-1995 | 石油產品和潤滑劑 三方基磷酸酯渦輪機控制液 規范 | Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (categorie ISO-L-TCD) - Specifications (IEC 61221:1993) |
| EN 61400-21-2002 | 風輪發電機系統 第21部分：柵格連接的風力渦輪機動力質量特性的測量和評估 | Wind turbine generator systems - Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines (IEC 61400-21:2001) |
| EN ISO 10651-4-2002 | 醫用肺通氣機 第4部分：操作者控制的呼吸機的特殊要求 | Lung ventilators - Part 4: Particular requirements for operator-powered resuscitators (ISO 10651-4:2002) |
| EN ISO 7785-1-1999 | 牙科手機 第1部分：高速氣動渦輪手機 | Dental handpieces - Part 1: High-speed air turbine handpieces (ISO 7785-1:1997) |
| GB 439-1990 | 航空噴氣機潤滑油 | Aviation jet engine lubricating oils |
| GB/T 10429-2006 | 單級向心渦輪液力變矩器型式和基本參數 | Single-stage centripetal turbine torque converters―Types and basic parameters |
| GB/T 10856-2006 | 雙渦輪液力變矩器技術條件 | Double turbine torque converter―Specification |
| GB/T 13410-1992 | 船用柴油機渦輪增壓器技術條件 | The technical specifications of turbochargers used for marine diesel engines |
| GB/T 17289-1998 | 液態烴體積測量渦輪流量計計量系統 | Liquid hydrocarbons--Volumetric measurement by turbine meter system |
| GB/T 18940-2003 | 封閉管道中氣體流量的測量渦輪流量計 | Measurement of gas flow in closedconduits--Turbine meters |
| GB/T 19235-2003 | 液化石油氣加氣機加氣槍 | Fueling nozzle for LPG dispenser |
| GB/T 19236-2003 | 壓縮天然氣加氣機加氣槍 | Fueling nozzle for CNG dispenser |
| GB/T 19237-2003 | 汽車用壓縮天然氣加氣機 | Compressed natural gas dispenser for vehicle |
| GB/T 19238-2003 | 汽車用液化石油氣加氣機 | Liquefied petroleum gas dispenser for vehicle |
| GB/T 20410-2006 | 渦輪機高溫螺栓用鋼 | Steels for turbine bolts at high temperature |
| GB/T 727-2003 | 渦輪增壓器產品命名和型號編制方法 | Turbocharger nomenclature and code |
| GB/T 7774-1987 | 渦輪分子泵性能測試方法 | Methods of measurement of the performance characteristics of turbo-molecular pumps |
| GB/T 9485-2003 | 徑流式渦輪增壓器聯接尺寸 | Radial turbochargers--Connection dimensions |
| HG/T 3796.4-2005 | 開啟渦輪式攪拌器 | () |
| HG/T 3796.5-2005 | 圓盤渦輪式攪拌器 | () |
| IEC 60601-2-12-2001 | 醫用電氣設備 肺通氣機安全性的特定要求 第2-12部分：危急護理通氣機 | Medical electrical equipment - Part 2-12: Particular requirements for the safety of lung ventilators; Critical care ventilators |
| IEC 60842-1988 | 氫冷式渦輪同步電機的使用與運行導則 | Guide for application and operation of turbine-type synchronous machines using hydrogen as a coolant. |
| IEC 60978-1989 | 三芳基磷酸酯渦輪機控制液的維護和使用指南 | Maintenance and use guide for triaryl phosphate ester turbine control fluids |
| IEC 61221-2004 | 石油產品和潤滑劑.三芳基磷酸酯渦輪機控制液(ISO-L-TCD類).規范 | Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications |
| IEC 61400-1-2005 | 風渦輪發電機組.第1部分:設計要求 | Wind turbines - Part 1: Design requirements |
| IEC 61400-2-2006 | 風力渦輪機.第2部分:小型風力渦輪機的設計要求 | Wind turbines - Part 2: Design requirements for small wind turbines |
| IEC/TR 61400-24-2002 | 風力渦輪機發電機系統.第24部分:避雷裝置 | Wind turbine generator systems - Part 24: Lightning protection |
| IEEE 1129-1992 | 渦輪發電機監測儀表用推薦規范 | (Recommended practice for monitoring and instrumentation of turbine generators) |
| IEEE 67-1990 | 渦輪發電機操作和維護指南 | (Guide for operation and maintenance of turbine generators) |
| ISO 10050-2005 | 潤滑劑、工業潤滑油和相關產品（L類）.T（渦輪機）族.三芳基磷酸脂渦輪機控制液體規范(類別 ISO-L-TCD) | Lubricants, industrial oils and related products (class L) - Family T (Turbines) - Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD) |
| ISO 10651-2-2004 | 醫用肺通氣機.基本安全和性能的特殊要求.第2部分:通氣機依賴型病人用家庭護理通氣機 | Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 2: Home care ventilators for ventilator-dependent patients |
| ISO 10651-3-1997 | 醫用肺通氣機 第3部分:急救和運送用通氣機的專用要求 | Lung ventilators for medical use - Part 3: Particular requirements for emergency and transport ventilators |
| ISO 10651-4-2002 | 醫用肺通氣機.第4部分:操作員控制的呼吸器的特殊要求 | Lung ventilators - Part 4: Particular requirements for operator-powered resuscitators |
| ISO 10651-5-2006 | 醫用肺通氣機.基本安全和性能的特殊要求.第5部分:氣體驅動急救人工呼吸器 | Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 5: Gas-powered emergency resuscitators |
| ISO 10651-6-2004 | 醫用肺通氣機.基本安全和性能的特殊要求.第6部分:家庭護理通風機支持設備 | Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 6: Home-care ventilatory support devices |
| ISO 12097-3-2002 | 道路車輛.空氣囊零部件.第3部分:充氣機組合件的檢驗 | Road vehicles - Airbag components - Part 3: Testing of inflator assembly |
| ISO 14621-1-2003 | 航天系統.電氣、電子和電氣機械(EEE)零件.第1部分:零件管理 | Space systems - Electrical, electronic and electromechanical (EEE) parts - Part 1: Parts management |
| ISO 14661 AMD 1-2002 | 工業用熱渦輪機(蒸汽渦輪機、氣體膨脹式輪機).一般要求.修改件A1:工業用熱渦輪機數據表 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) - General requirements; Amendment A1: Data sheets for thermal turbines for industrial applications |
| ISO 14661-2000 | 工業用熱力渦輪機(蒸氣輪機、燃?xì)馀蛎洔u輪) 一般要求 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) - General requirements |
| ISO 15911-2000 | 石油產品 用氫含量數據評定航空渦輪燃燒的凈比能 | Petroleum products - Estmation of net specific emergy of eviation turbine fuels using hydrogen content data |
| ISO 2715-1981 | 液態烴 用渦輪流量計測量體積 | Liquid hydrocarbons; Volumetric measurement by turbine meter systems |
| ISO 5302-2003 | 真空技術.渦輪分子泵.性能特征的測量 | Vacuum technology - Turbomolecular pumps - Measurement of performance characteristics |
| ISO 5367-2000 | 麻醉機和通氣機連用的呼吸管 | Breathing tubes intended for use with anaesthetic apparatus and ventilators |
| ISO 7785-1-1997 | 牙科手機 第1部分:高速氣動渦輪手機 | Dental handpieces - Part 1: High-speed air turbine handpieces |
| ISO 8068-1987 | 石油產品和潤滑劑 渦輪機用潤滑油(ISO-L-TSA和 ISO-L-TGA類)規格 | Petroleum products and lubricants; Petroleum lubricating oils for turbines (categories ISO-L-TSA and ISO-L-TGA); Specifications |
| ISO 81400-4 Technical Corrigendum 1-2005 | 風力渦輪機.第4部分:齒輪箱的設計和規范.技術勘誤1 | Wind turbines - Part 4: Design and specification of gearboxes; Technical Corrigendum 1 |
| ISO 81400-4-2005 | 風力渦輪機.第4部分:齒輪箱的設計和規范 | Wind turbines - Part 4: Design and specification of gearboxes |
| ISO 9951-1993 | 封閉管道中氣體流量的測量 渦輪計 | Measurement of glas flow in closed conduits; turbine meters |
| JB/T 10629-2006 | 燃?xì)鈾C(jī) 通用技術條件和試驗方法 | Gas engines-General requirements and test methods |
| JB/T 10670-2006 | 倒傘型表面曝氣機 | Inverted-umbrella type surface aerator |
| JB/T 57213-1999 | 渦輪流量傳感器 可靠性要求與考核方法 | () |
| JB/T 6002-2007 | 渦輪增壓器 清潔度限值及測定方法 | Turbochargers-Limit values and measurement methods for cleanliness |
| JB/T 6689-1993 | 燃?xì)廨啓C(jī) 壓氣機葉片燕尾根槽公差及技術要求 | () |
| JB/T 8700-1998 | 氧化溝水平軸轉刷曝氣機技術條件 | () |
| JB/T 9125-2007 | 真空技術 渦輪分子泵 | Vacuum technology-Turbomolecular pumps |
| JB/T 9246-1999 | 渦輪流量傳感器 | () |
| JB/T 9711-2001 | 單級向心渦輪液力變矩器 通用技術條件 | () |
| JB/T 9752.1-2005 | 渦輪增壓器 第1部分：一般技術條件 | () |
| JB/T 9752.2-2005 | 渦輪增壓器 第2部分：試驗方法 | () |
| JB/T 9752.3-2004 | 渦輪增壓器 轉子平衡品質及校驗方法 | () |
| JIS B0131-2002 | 渦輪泵術語集 ターボポンプ用語 | Glossary of terms for turbopumps |
| JIS B8043-1-2000 | 燃?xì)鉁u輪.廢氣排放.第1部分:測量和評價 ガスタービン ― 排気排出物 ― 第１部：測定及び評価 | Gas turbines -- Exhaust gas emission -- Part 1: Measurement and evaluation |
| JIS B8043-2-2000 | 燃?xì)鉁u輪.廢氣排放.第2部分:自動排放監測 ガスタービン ― 排気排出物 ― 第２部：排出物の自動監視 | Gas turbines -- Exhaust gas emission -- Part 2: Automated emission monitoring |
| JIS B8044-2001 | 燃?xì)廨啓C(jī)和燃?xì)鉁u輪機組.發出的氣載噪聲的測量.工程/測量法 ガスタービン及びガスタービン裝置 ― 空気音の測定 ― 実用測定方法及び簡易測定方法 | Gas turbines and gas turbine sets -- Measurement of emitted airborne noise -- Engineering/survey method |
| JIS B8103-1989 | 水輪機及雙向泵水渦輪的模型試驗方法 水車及びポンプ水車の模型試験方法 | Methods for model tests of hydraulic turbine and reversible pump-turbine |
| JIS B8105-2004 | 蒸汽渦輪機.驗收試驗.改型蒸汽渦輪機的熱性能檢查試驗 蒸気タービン－受渡試験方法－改造時の性能確認 | Steam turbines -- Acceptance test -- Thermal performance verification tests of retrofitted steam turbines |
| JIS B8330-2000 | 渦輪風扇試驗方法 送風機の試験及び検査方法 | Testing methods for turbo-fans |
| JIS B8330 ERRATUM 1-2002 | 渦輪風扇的試驗方法(勘誤1) | Testing methods for turbo-fans (Erratum 1) |
| JIS B8340-2000 | 渦輪式鼓風機和壓縮機的檢驗方法 ターボ形ブロワ?圧縮機の試験及び検査方法 | Testing methods for turbo blowers and compressors |
| JIS B8345-1995 | 渦輪式鼓風機和氣體壓縮機的封閉試驗方法 ターボ形ガス用ブロワ?圧縮機の閉回路による試験及び検査方法 | Testing methods of turbo blowers and compressors for gases by loop arrangement |
| JIS C1400-0-2005 | 風力渦輪發電機系統.第0部分:風力渦輪發電機系統術語匯編 風力発電システム―第０部：風力発電用語 | Wind turbine generator systems -- Part 0: Glossary of terms for wind turbine generator system |
| JIS C1400-1-2001 | 風力渦輪發電系統.第1部分:安全性要求 風力発電システム ― 第１部：安全要件 | Wind turbine generator systems -- Part 1: Safety requirements |
| JIS C1400-2-1999 | 風力渦輪發電機系統.第2部分:小型風力渦輪機的安全性 風力発電システム ― 第２部：小形風力発電システムの安全基準 | Wind turbine generator systems -- Part 2: Safety of small wind turbines |
| JIS C1400-11-2005 | 風力渦輪發電機系統.第11部分:噪聲測量技術 風力発電システム―第１１部：騒音測定方法 | Wind turbine generator systems -- Part 11: Acoustic noise measurement techniques |
| JIS C1400-12-2002 | 風渦輪發電機系統.第12部分:風力渦輪機動力特性試驗 風力発電システム ― 第１２部：風車の性能計測方法 | Wind turbine generator systems -- Part 12: Wind turbine power performance testing |
| JIS C1400-12 ERRATUM 1-2002 | 風力渦輪發電機系統.第12部分:風力渦輪發電機的性能試驗(勘誤1) | Wind turbine generator systems -- Part 12: Wind turbine power performance testing (Erratum 1) |
| JIS C1400-21-2005 | 風力渦輪發電機系統.第21部分:網格連接風力渦輪機的發電質量特性的測量和評定 風力発電システム―第２１部：系統連系風車の電力品質特性の測定及び評価 | Wind turbine generator systems -- Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines |
| JIS C9335-2-92-2005 | 家用和類似用途電氣設備.安全.第2-92部分:腳踏交流供電草地松土機和通氣機的特殊要求 家庭用及びこれに類する電気機器の安全性―第２－９２部：歩行式芝生用スカリファイア及びエアレータの個別要求事項 | Household and similar electrical appliances -- Safety -- Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators |
| JIS K2209-1991 | 航空渦輪機燃油 航空タービン燃料油 | Aviation turbine fuels |
| JIS K2213-1983 | 渦輪機油 タービン油 | Turbine oils |
| JIS K2213 AMD 1-2006 | 渦輪機油（修改件1） タービン油（追補１） | Turbine oils (Amendment 1) |
| JIS K2537-2000 | 石油產品.煤油和航空渦輪機燃料.煙霧點的測定 石油製品 ― 燈油及び航空タービン燃料油 ― 煙點試験方法 | Petroleum products -- Kerosine and aviation turbine fuels -- Determination of smoke point |
| JIS T5906-2001 | 牙鉆手柄.第1部分:高速空氣渦輪牙鉆手柄 歯科用ハンドピース ― 第１部：高速エアタービンハンドピース | Dental handpieces -- Part 1: High-speed air-turbine handpieces |
| JIS W4601-1996 | 飛行器用渦輪噴氣及渦輪風扇發動機通用規范 航空ターボジェットエンジン及びターボファンエンジン通則 | General specification of turbojet engines and turbofan engines for aircraft |
| JIS W4606-1995 | 飛行器渦輪軸和渦輪螺旋槳發動機通用規范 航空ターボシャフトエンジン及びターボプロップエンジン通則 | General specification of turboshaft and turboprop engines for aircraft |
| NF C01-415-1999 | 電工詞匯.第415章:風力渦輪發電系統 | (Electrotechnical Vocabulary - chapter 415 : wind turbine generator systems.) |
| NF C27-140-1995 | 石油產品和潤滑劑.三重磷酸脂渦輪控制流體.規范 | (Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category iso-L-tcd). Specifications.) |
| NF C51-113-1997 | 旋轉電機.第3部分:渦輪型同步機械的特殊要求 | (Rotating electrical machines. Part 3 : specific requirements for turbine-type synchronous machines.) |
| NF C55-420-1993 | 液壓機(渦輪、存儲泵和水泵-水輪機)的振動和脈動的現場測量指南 | (Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storga pumps and pump-turbines).) |
| NF C55-493-2000 | 液壓渦輪機,儲存泵和泵渦輪.模型驗收試驗 | (Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests.) |
| NF E17-303-2002 | 煤氣表.渦輪式煤氣表 | (Gas meters - Turbine gas meters.) |
| NF E37-500-1988 | 內燃機.燃?xì)鉁u輪機.驗收試驗 | (INTERNAL COMBUSTION MACHINES. GAS TURBINE. ACCEPTANCE TESTS.) |
| NF E37-501-9-2000 | 氣體渦輪.征購.第9部分:可信性,可用性,可維修性和安全性 | (Gas turbines - Procurement - Part 9 : reliability, availability, maintainability and safety.) |
| NF E37-601-2000 | 工業用熱渦輪機(蒸汽渦輪機,氣膨脹渦輪機).一般要求 | (Thermal turbines for industrial applications (steam turbines, gas expansion turbines) - General requirements.) |
| NF E44-501-1991 | 小功率液壓渦輪機.平臺試驗 | (LOW POWER HYDRAULIC TURBINES. TESTS ON TEST RIG.) |
| NF E44-502-1991 | 小功率水力渦輪機.現場驗收試驗 | (SMALL POWER HYDRAULIC TURBINES. FIELD ACCEPTANCE TEST.) |
| NF R10-105-3-2003 | 道路車輛.安全氣囊元部件.第3部分:充氣機組件的檢驗 | (Road vehicles - Airbag components - Part 3 : testing of inflator assemblies.) |
| NF R16-339-1990 | 置于內燃機和壓氣機入口處的空氣分離器.效率試驗 | (INLET AIR CLEANING EQUIPMENT FOR INTERNAL COMBUSTION ENGINES AND COMPRESSORS. PERFORMANCE TESTING.) |
| NF S31-071-1981 | 聲學.燃?xì)鉁u輪機空氣傳播噪音的測量.規范和鑒驗方法 | (ACOUSTICS. MEASUREMENT OF AIRBONE NOISE EMITTED BY GAS TURBINE INSTALLATIONS. SPECIFICATIONS AND SURVEY METHOD.) |
| NF S91-112-1999 | 牙鉆手柄.第1部分:高速空氣渦輪手柄 | (Dental handpieces. Part 1 : high-speed air turbine handpieces.) |
| NF S95-146-2002 | 醫用肺通氣機.第4部分:操作員控制的呼吸器的特殊要求 | (Lung ventilators - Part 4 : particular requirements for operator-powered resuscitators.) |
| NF S95-161-1998 | 肺換氣機.第3部分:急救和輸送換氣機的特殊要求 | (Lung ventilators. Part 3 : particular requirements for emergency and transport ventilators.) |
| NF T60-125-1979 | 石油產品.渦輪機油的反乳化 | (PETROLEUM PRODUCTS. DE EMULSION OF TURBINE OILS.) |
| NF T60-150-1979 | 石油產品.加抗氧化劑渦輪機油的氧化穩定性 | (PETROLEUM PRODUCTS. OXIDATION STABILITY OF INHIBITED TURBINE OILS.) |
| NF T60-151-1979 | 石油產品.有水時渦輪機油防銹特性的評定 | (PETROLEUM PRODUCTS. ASSESSMENT OF RUST-PREVENTING CHARACTERISTICS OF TURBINE OIL IN THE PRESENCE OF WATER.) |
| NF T60-156-1982 | 石油產品.不加抗氧劑的新渦輪機油的抗乳化指數.水蒸氣試驗 | (PETROLEUM PRODUCTS. DESEMULSIFICATION NUMBER OF NEW NON INHIBITED TURBINE OILS. WATER VAPOUR TEST.) |
| NF T60-503-1988 | 潤滑劑、工業潤滑油及相關產品(L級).分類.第5部分:T族(渦輪用) | (Lubricants, industrial oils and related products (class L). Classification. Part 5 : family T (turbines).) |
| NF T60-521-1989 | 石油產品和潤滑劑.渦輪用石油潤滑油(ISO-L-TSA和ISO-L-TGA).規范 | (PETROLEUM PRODUCTS AND LUBRICANTS. PETROLEUM LUBRICATING OILS FOR TURBINES (CATEGORIES ISO-L-TSA AND ISO-L-TGA). SPECIFICATIONS.) |
| NF T81-008-1974 | 液態化學產品的運輸和裝卸:內河航行罐船.運輸過程中的安全要求.壓縮空氣機械操作安全設備 | (TRANSPORT AND HANDLING OF LIQUID CHEMICAL PRODUCTS:TANKERS FOR INTERIOR NAVIGATION:SAFETY REQUIREMENTS DURING TRANSFER OPERATIONS - MECHANICALLY OPERATED SAFETY DEVICE BY COMPRESSED AIR.) |
| NF X10-519-1975 | 真空技術.渦輪分子泵.功能特性的測定 | (VACUUM TECHNOLOGY - METHODS OF MEASUREMENT OF THE PERFORMANCE CHARACTERISTICS OF TURBO-MOLECULAR PUMPS) |
| NF X50-001-5-1-1998 | 動力站設備的征購指南.第5-1部分:渦輪機.蒸氣渦輪機 | (Guide for procurement of power station equipment. Part 5-1 : turbines. Steam turbines.) |
| NF X50-001-5-2-1998 | 發電站設備的采購指南.第5-2部分:渦輪機.氣體渦輪機 | (Guide for procurement of power station equipment. Part 5-2 : turbines. Gas turbines.) |
| NF X50-001-5-3-1998 | 動力站設備的征購指南.第5-3部分:渦輪機.蒸氣渦輪機 | (Guide for procurement of power station equipment. Part 5-3 : turbines. Aerogeneratore.) |
| NF X50-001-5-4-1998 | 動力站設備的征購指南.第5-4部分:渦輪機.液壓渦輪機.儲存泵和泵渦輪機 | (Guide for procurement of power station equipment. Part 5-4 : turbines. Hydraulic turbines, storage pumps and pump-turbines.) |
| NF X50-001-6-1-1998 | 發電站設備的采購指南.第6-1部分:渦輪機附件.空氣分離器 | (Guide for procurement of power station equipment. Part 6-1 : turbine auxiliaries. Deaerators.) |
| NF X50-001-6-2-1998 | 發電站設備的采購指南.第6-2部分:渦輪機附件.回水加熱器 | (Guide for procurement of power station equipment. Part 6-2 : turbine auxiliaries. Feedwater heaters.) |
| NF X50-001-6-3-1998 | 發電站設備的采購指南.第6-3部分:渦輪機附件.壓縮工廠 | (Guide for procurement of power station equipment. Part 6-3 : turbine auxiliaries. Condenser plant.) |
| NF X50-001-6-4-2000 | 動力站設備的征購指南.第6部分:渦輪附件.第4節:泵 | (Guide for the procurement of power station equipement - Part 6 : turbine auxiliaries - Section 4 : pumps.) |
| NF X50-001-6-5-2000 | 動力站設備的征購指南.第6部分:渦輪附件.第5節:干冷系統 | (Guide for procurement of power station equipment - Part 6 : turbines auxiliaries - Section 5 : dry cooling systems.) |
| NF X50-001-6-6-2000 | 動力站設備的征購指南.第6部分:渦輪附件.第6節:濕和濕/干冷卻塔 | (Guide for the procurement of power station equipment - Part 6 : turbine auxiliaries - Section 6 : wet and wet/dry cooling towers.) |
| NF X50-001-6-7-1998 | 發電站設備的采購指南.第6-7部分:渦輪機附件.潮氣隔離再加熱器 | (Guide for procurement of power station equipment. Part 6-7 : turbine auxiliaries. Moisture separator reheaters.) |
| NF X50-001-6-8-2000 | 發電站設備采購指南.第6部分:渦輪機輔助設備.第8節:起重機 | (Guide for procurement of power station equipment - Part 6 : turbine auxiliaries - Section 8 : cranes.) |
| NF X50-001-6-9-2000 | 發電站設備采購指南.第6部分:渦輪機輔助設備.第9節:冷卻水系統 | (Guide for procurement of power station equipment - Part 6 : turbine auxiliaries - Section 9 : cooling water systems.) |
| PD IEC WT 01-2001 | 風力渦輪機的符合性測試和認證用IEC系統.規則和程序 | IEC system for conformity testing and certification of wind turbines. Rules and procedures |
| QC/T 590-1999(2005) | 汽車柴油機渦輪增壓器技術條件 | () |
| QC/T 591-1999(2005) | 汽車柴油機渦輪增壓器試驗方法 | () |
| SH/T 0632-1996(2003) | 航空渦輪發動機潤滑劑比熱測定法（熱分析法） | () |
| SY/T 5141-2002 | 石油鉆機用離心渦輪液力變距器 | () |
| prEN 45517-1994 | 采購指南 渦輪機輔助設備 脫氣器 | Guide for procurement - Turbine auxiliaries - Deaerators |
| prEN 45518-1994 | 采購指南 渦輪機輔助設備 給水加熱器 | Guide for procurement - Turbine auxiliaries - Feedwater heaters |
| prEN 45529-1994 | 采購指南 渦輪機輔助設備 冷凝設備 | Guides for procurement - Turbine auxiliaries - Condenser plant |
| prEN 45536-1995 | 采購指南 渦輪機 汽輪機 | Guides for procurement - Turbines - Steam turbine |
| prEN 45537-1995 | 采購指南 渦輪機組 燃?xì)廨啓C(jī) | Guides for procurement - Turbine group - Gas turbines |
| prEN 45539-1995 | 采購指南 渦輪機輔助設備 濕氣分離回?zé)崞? | Guides for procurement - Turbine auxilliaries - Moisture separator reheater |
| prEN 45540-1995 | 采購指南 渦輪發電機 | Guide for procurement - Generators driven by turbine |
| prEN 45543-1995 | 采購指南 渦輪 水壓機 | Guides for procurement - Turbines - Hydraulic machines |
| prEN 50308-2003 | 風力渦輪機 實驗室安全性 | Wind turbines - Protective measures - Requirements for design, operation and maintenance |
| 編號 | 中文名稱 | 英文名稱 |