| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 2TA 28-1974 | 鈦鋁釩合金鍛坯和線材規范(抗拉強度1100-1300MPa)(限定等圓斷面20mm)(主要供加工符合英國標準A系列要求的緊 | Specification for forging stock and wire of titanium-aluminium-vanadium alloy (tensile strength 1100-1300 MPa) (limiting ruling section 20 mm) (primarily intended for the manufacture of fasteners complying with the requirements of the 'A' series of British Standards) |
| BS 3F 121-1995 | 航空航天用金屬滑動緊固件規范 | Specification for metallic slide fasteners for aerospace purposes |
| BS 3HR 601-1989 | 緊固件制造用(最大直徑或小截面尺寸為30mm)鎳-鉻-鈦-鋁耐熱合金棒材和線材(鎳基鉻19.5、鈦2.2、鋁1.4)規范 | Specification for nickel-chromium-titanium-aluminium heat-resisting alloy bar and wire for the manufacture of fasteners (maximum diameter or minor sectional dimension 30 mm) (nickel base Cr 19.5, Ti 2.2, Al 1.4) |
| BS 6268-1982 | 安裝螺紋緊固件用手持氣動裝配工具反作用扭矩及扭矩沖力測量方法 | Method of measurement for reaction torque and torque impulse from hand-held pneumatic assembly tools for installing threaded fasteners |
| BS 6462-1985 | 拴柱式窗扉撐條和正面固定楔入式緊固件機械性能規范 | Specification for mechanical performance of peg-type casement stays and face-fixed wedge-action fasteners |
| BS 6587-1985 | 緊固件的驗收檢驗方法 | Method of acceptance inspection for fasteners |
| BS 7371-1-1991 | 金屬緊固件涂層.一般要求和選擇指南規范 | Coatings on metal fasteners - Specification for general requirements and selection guidelines |
| BS 7371-10-1994 | 金屬緊固件涂層.第10部分:有機涂層規范 | Coatings on metal fasteners - Specification for organic coatings |
| BS 7371-2-1993 | 金屬緊固件涂層.扭矩/夾緊力關系式規范 | Coatings on metal fasteners - Specification for torque/clamping force relationship |
| BS 7371-4-1994 | 金屬緊固件涂層.第4部分:電鍍鎳、鎳/鉻和銅/鎳/鉻涂層規范. | Coatings on metal fasteners - Specification for electroplated nickel, nickel/chromium and copper/nickel/chromium coatings |
| BS 7371-6-1998 | 金屬緊固件涂層.熱浸鍍鋅涂層的規范 | Coatings on metal fasteners - Specification for hot dipped galvanized coatings |
| BS 7371-7-1994 | 金屬緊固件涂層.采用機械法施加鋅涂層規范 | Coatings on metal fasteners - Specification for mechanically applied zinc coatings |
| BS 7371-8-1998 | 金屬緊固件涂層.粉末鍍鋅涂層規范 | Coatings on metal fasteners - Specification for sherardized coatings |
| BS 7371-9-1996 | 金屬緊固件涂層.磷酸鹽涂層或油涂層規范 | Coatings on metal fasteners - Specification for phosphate or phosphate and oil coatings |
| BS 7774-1994 | 螺紋緊固件.軸向負荷疲勞試驗.第1部分:試驗方法和結果評估 | Threaded fasteners - Axial load fatigue testing - Test methods and evaluation of results |
| BS 7776-1995 | 螺紋緊固件扭矩術語詞匯 | Glossary of torque terminology for threaded fasteners |
| BS A 272-1977 | 高扭矩快速旋入凹槽的緊固件規范:沉頭緊固件尺寸和測量 | Specification for Hi-torque speed drive recess: dimensions and gauging for countersunk head fasteners |
| BS A 273-1978 | 100°埋頭緊固件的平齊度控制測量方法規范 | Specification for gauging practice for 100 ° countersunk head fasteners for flushness control |
| BS DD CEN/TS 15087-2006 | 屋頂用已裝粘土和混凝土嵌合瓦片的抗隆起性測定.機械緊固件的試驗方法 | Determination of the uplift resistance of installed clay and concrete interlocking tiles for roofing - Test method for mechanical fasteners |
| BS DD ISO/TS 17104-2006 | 螺紋緊固件的旋轉刀具.液壓推動工具.性能試驗方法 | Rotary tool for threaded fasteners - Hydraulic impulse tools - Performance test method |
| BS EN 10269-1999 | 規定高溫和/或低溫性能的緊固件用鋼及鎳合金 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| BS EN 1075-2000 | 木結構.試驗方法.由沖打孔金屬板緊固件構成的接頭 | Timber structures - Test methods - Joints made with punched metal plate fasteners |
| BS EN 12512-2001 | 木結構.試驗方法.機械緊固件接頭的周期測試 | Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners |
| BS EN 12549-1999 | 聲學.緊固件驅動工具的噪聲試驗法規.工程法 | Acoustics - Noise test code for fastener driving tools - Engineering method |
| BS EN 13146-6-2002 | 鐵路設施.軌道.緊固件系統的試驗方法.嚴酷環境條件的影響 | Railway applications - Track - Test methods for fastening systems - Effect of severe environmental conditions |
| BS EN 13271-2002 | 木材緊固件.連接器接頭的特征載荷能力和滑脫系數 | Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints |
| BS EN 13446-2002 | 木基板材.緊固件拔出能力的測定 | Wood-based panels - Determination of withdrawal capacity of fasteners |
| BS EN 13481-1-2002 | 鐵路設備.軌道.緊固件系統的性能要求.定義 | Railway applications - Track - Performance requirements for fastening systems - Definitions |
| BS EN 13481-2-2002 | 鐵路設備.軌道.緊固件系統的性能要求.混凝土軌枕的緊固系統 | Railway applications - Track - Performance requirements for fastening systems - Fastening systems for concrete sleepers |
| BS EN 13481-3-2002 | 鐵路設備.軌道.緊固件系統的性能要求.木質軌枕的緊固件系統 | Railway applications - Track - Performance requirements for fastening systems - Fastening systems for wood sleepers |
| BS EN 13481-4-2002 | 鐵路設備.軌道.緊固件系統的性能要求.鋼軌枕的緊固件系統 | Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers |
| BS EN 13481-5-2002 | 鐵路設備.軌道.緊固件系統的性能要求.厚板軌道的緊固系統 | Railway applications - Track - Performance requirements for fastening systems - Fastening systems for slab track |
| BS EN 1382-1999 | 木結構.試驗方法.木結構緊固件的拆卸能力 | Timber structures - Test methods - Withdrawal capacity of timber fasteners |
| BS EN 1383-1999 | 木結構.試驗方法.木結構緊固件的抗拉穿性能 | Timber structures - Test methods - Pull-through resistance of timber fasteners |
| BS EN 14250-2005 | 木結構.裝配穿孔金屬板緊固件的預制結構組件的生產要求 | Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners |
| BS EN 14831-2005 | 緊固件.緊固性能.扭矩/角度簡化試驗法 | Fasteners - Tightening performance - Torque/Angle simplified test method |
| BS EN 20225-1992 | 緊固件.螺栓、螺柱和螺母.圖形符號和尺寸 | Fasteners - Bolts, screws, studs and nuts - Symbols and designations of dimensions |
| BS EN 20273-1992 | 緊固件.螺栓和螺釘自由尺寸孔 | Fasteners - Clearance holes for bolts and screws |
| BS EN 20898-2-1994 | 緊固件機械性能.第2部分:有規定檢驗載荷值的螺母.粗牙螺紋 | Mechanical properties of fasteners - Nuts with specified proof load values - Coarse thread |
| BS EN 20898-7-1995 | 緊固件機械性能.標稱直徑為1MM到10MM的螺栓和螺釘?shù)呐まD(zhuǎn)試驗和最小扭矩 | Mechanical properties of fasteners - Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm |
| BS EN 26157-1-1992 | 緊固件的表面不均勻性.第1部分:一般要求的螺栓、螺釘和螺柱 | Fasteners - Surface discontinuities - Bolts, screws and studs for general requirements |
| BS EN 26157-3-1992 | 緊固件的表面不均勻性.第3部分:有特殊要求的螺栓、螺釘和螺柱 | Fasteners - Surface discontinuities - Bolts, screws and studs for special requirements |
| BS EN 26891-1991 | 木結構.機械緊固件接頭.強度和變形特性測定一般原則 | Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics |
| BS EN 28839-1992 | 緊固件機械性能.有色金屬制螺栓、螺釘、螺柱和螺母 | Mechanical properties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals |
| BS EN 28970-1991 | 木結構.用機械緊固件連接的接頭試驗.木材致密度要求 | Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density |
| BS EN 383-2007 | 木結構.試驗方法.測定榫型緊固件的嵌入強度和基值 | Timber structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners |
| BS EN 409-1993 | 木結構.試驗方法.榫型緊固件屈服力矩的測定.釘子 | Timber structures - Test methods - Determination of the yield moment of dowel type fasteners - Nails |
| BS EN 4174-2006 | 航天航空系列.陽極電鍍或鉻酸鹽處理鋁合金2024米制系列、連接模壓鎖緊凹頭緊固件 | Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series |
| BS EN 4176-2005 | 航空航天系列.緊公差TI-P64001鈦合金制陽極電鍍或鋁質有色覆層１００°正常或沉頭緊固/凹頭鎖緊螺栓.TI-P99 | Aerospace series - Lockbolts, 100 ° countersunk normal head or protruding head, tension-/ sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metric series - Technical specification |
| BS EN 792-1-2000 | 手持非電動工具.安全性要求.無螺紋的機械緊固件用的裝配動力工具 | Hand-held non-electric power tools - Safety requirements - Assembly power tools for non-threaded mechanical fasteners |
| BS EN 792-13-2000 | 手持非電動工具.安全性要求.緊固件旋擰工具 | Hand-held non-electric power tools - Safety requirements - Fastener driving tools |
| BS EN 792-6-2000 | 手持非電動工具.安全性要求.帶螺紋緊固件用的裝配動力工具 | Hand-held non-electric power tools - Safety requirements - Assembly power tools for threaded fasteners |
| BS EN 912-2000 | 木緊固件.木連接件規范 | Timber fasteners - Specifications for connections for timber |
| BS EN ISO 10683-2000 | 緊固件.非電解鋅粉覆層 | Fasteners - Non-electrolytically applied zinc flake coatings |
| BS EN ISO 10684-2006 | 緊固件.熱浸鍍層 | Fasteners - Hot dip galvanized coatings |
| BS EN ISO 10964-1997 | 粘合劑.螺紋緊固件上厭氧粘接劑的抗扭強度的測定 | Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners |
| BS EN ISO 12777-1-1995 | 托盤連接件的檢驗方法.托盤用釘子、其它榫釘型緊固件和U形釘?shù)目箯澢臏y定 | Methods of test for pallet joints - Determination of bending resistance of pallet nails, other dowel-type fasteners and staples |
| BS EN ISO 15330-1999 | 緊固件.檢查氫脆性用預載荷試驗.平行支承面法 | Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method |
| BS EN ISO 16047-2005 | 緊固件.扭矩/夾持力試驗 | Fasteners - Torque/clamp force testing |
| BS EN ISO 16048-2003 | 耐腐蝕不銹鋼緊固件的鈍化 | Passivation of corrosion-resistant stainless-steel fasteners |
| BS EN ISO 16426-2002 | 緊固件.質量保證體系 | Fasteners - Quality assurance system |
| BS EN ISO 3269-2001 | 緊固件.驗收檢驗 | Fasteners - Acceptance inspection |
| BS EN ISO 3506-1-1998 | 耐腐蝕不銹鋼緊固件的機械特性.螺栓、螺釘和螺柱 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Bolts, screws and studs |
| BS EN ISO 3506-2-1998 | 耐腐蝕不銹鋼緊固件的機械特性.螺母 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Nuts |
| BS EN ISO 3506-3-1998 | 耐腐蝕不銹鋼緊固件的機械特性.不受拉伸應力作用的定位螺絲和同類緊固件 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Set screws and similar fasteners not under tensile stress |
| BS EN ISO 3506-4-2003 | 耐腐蝕不銹鋼緊固件的機械特性.攻絲螺釘 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Tapping screws |
| BS EN ISO 4042-2000 | 緊固件.電鍍覆層 | Fasteners - Electroplated coatings |
| BS EN ISO 4753-2000 | 緊固件.帶ISO米制外螺紋的零件尾端 | Fasteners - Ends of parts with external ISO metric screw thread |
| BS EN ISO 4759-1-2001 | 緊固件公差.螺栓、螺釘、螺柱和螺母.產品等級A、B和C級 | Tolerances for fasteners - Bolts, screws, studs and nuts - Product grades A, B and C |
| BS EN ISO 4759-3-2000 | 緊固件公差.螺栓、螺釘和螺母用平墊圈.產品等級A和C | Tolerances for fasteners - Plain washers for bolts, screws and nuts - Product grades A and C |
| BS EN ISO 5845-1-1999 | 技術圖紙.用緊固件連接的零件組配的簡化表示法.一般原則 | Technical drawings - Simplified representation of the assemby of parts with fasteners - General principles |
| BS EN ISO 6157-2-2004 | 緊固件.表面缺陷.螺母 | Fasteners - Surface discontinuities - Nuts |
| BS EN ISO 898-1-1999 | 碳鋼和合金鋼制的緊固件的機械特性.螺栓、螺釘和螺柱 | Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs |
| BS EN ISO 898-5-1999 | 碳鋼及合金鋼制緊固件的機械性能.無拉伸應力下的定位螺釘和類似的螺紋緊固件 | Mechanical properties of fasteners made of carbon steel and alloy steel - Set screws and similar threaded fasteners not under tensile stresses |
| BS EN ISO 898-6-1996 | 緊固件的機械特性.具有規定檢驗荷載值的螺母.細牙螺紋 | Mechanical properties of fasteners - Nuts with specified proof load values - Fine pitch thread |
| BS ISO 15629-2002 | 物料搬運托盤.新的和用過修理的木制平托盤緊固件質量 | Pallets for materials handling - Quality of fasteners for assembly of new and repair of used, flat, wooden pallets |
| BS ISO 8992-2005 | 緊固件.螺栓、螺釘、螺柱和螺母通用要求 | Fasteners - General requirements for bolts, screws, studs and nuts |
| BS S 159-1981 | 制造緊固件用含12%鉻-鎳-鉬-釩耐熱鋼棒規范(1100-1300MPa;限定控制剖面50mm) | Specification for 12% chromium-nickel-molybdenum-vanadium heat-resisting steel bars for the manufacture of fasteners (1100-1300 MPa: limiting ruling section 50 mm) |
| BS SP 141-1970 | 肘桿式面板緊固件的設計與性能要求規范 | Specification for design and performance requirements for toggle type panel fasteners |
| BS SP 164-1978 | 轉動鎖緊、螺柱型面板緊固件(公制系列)的設計和性能要求規范 | Specification for design and performance requirements for turnlock, stud-type panel fasteners (metric series) |
| 編號 | 中文名稱 | 英文名稱 |