| 編號 | 中文名稱 | 英文名稱 |
|---|
| EN 3567-001-2001
| 航空航天系列 MIL-STD-1553B一致多元數據總線系統用在線偶合器 第001部分：技術規范
| Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 001: Technical specification
|
| EN 3567-003-2001
| 航空航天系列 與MIL-STD-1553B一致多元數據總線系統在線偶合器 第003部分：單內嵌偶合器 產品標準
| Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 003: Single in-line couplers; Product standard
|
| EN 3567-004-2001
| 航空航天系列 與MIL-STD-1553B一致多元數據總線系統在線偶合器 第004部分：雙在線耦合器 產品標準
| Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 004: Double in-line couplers; Product standard
|
| EN 50109-2-5-1995
| 手動壓接工具 低頻和射頻用電線和電纜壓接連接用工具 第2-5部分：數據總線用帶2個內芯的電纜連接的特殊要
| Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for the termination of twin-ax cable for databus applications
|
| EN 50182-2001
| 用于過熱總線的導體 圓形同軸多股電纜芯線的導體
| Conductors for overhead lines - Round wire concentric lay stranded conductors / Note: Includes Corrigendum of July 2001
|
| EN 60439-2-2000
| 低壓開關設備和控制設備組合裝置 第2部分：母線干線總線的特殊要求
| Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways) (IEC 60439-2:2000)
|
| EN 60821-1994
| IEC-821-VME總線 1字節至4字節數據用微處理系統總線
| IEC 821 VMEbus - Microprocessor system bus for 1 byte to 4 byte data (IEC 60821:1991, modified)
|
| EN 60864-2-1997
| 廣播發射機或發射機系統和監督設備之間互連的標準化 第2部分：使用數據總線互連的系統接口標準
| Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment - Part 2: Interface standards for systems using data bus type interconnections (IEC 60864-2:1997)
|
| EN 60933-4-1994
| 音頻、視頻和視聽系統 互連和匹配值 第4部分：內部數字總線用連接器和接線點
| Audio, video and audiovisual systems - Interconnections and matching values - Part 4: Connector and cordset for domestic digital bus (D2B) (IEC 60933-4:1994)
|
| EN 61030-1993
| 音頻、視頻和視聽系統用 家用數字總線(D２B)
| Audio, video and audiovisual systems; domestic digital bus (D2B) (IEC 61030:1991 + A1:1993)
|
| EN 61158-2-1994
| 工業控制系統用范圍總線標準 第2部分：物理層規范和服務定義
| Fieldbus standard for use in industrial control systems; part 2: physical layer specification and service definition (IEC 61158-2:1993)
|
| EN 61158-2/prA1-2000
| 工業控制系統用范圍總線標準 第2部分：物理層規范和服務定義 修改prA1
| Signal polarity requirements for wire media
|
| HD 576 S1-1990
| IEC 60822 VSB IEC 60821 VME總線的并聯子系統總線
| IEC 60822 VSB - Parallel sub-system bus of the IEC 60821 VME bus
|
| HD 593.1 S1-1992
| 微處理系統總線8比特和16比特數據(MULTIBUS I) 第1部分：功能描述和電氣及定時規范
| Microprocessor system bus 8-bit and 16-bit data (MULTIBUS I) - Part 1: Functional description with electrical and timing specifications (IEC 60796-1:1990)
|
| HD 593.2 S1-1992
| 微處理系統總線8比特和16比特數據(MULTIBUS I) 第2部分：帶邊緣連接器的系統總線配置的機械和插頭描述
| Microprocessor system bus 8-bit and 16-bit data (MULTIBUS I) - Part 2: Mechanical and pin descriptions for the system bus configuration, with edge connectors (direct) (IEC 60796-2:1990)
|
| HD 593.3 S1-1991
| 微處理系統總線8比特和16比特數據(MULTIBUS I) 第3部分：帶插頭和插座連接器的歐洲卡配置的機械和插頭描述
| Microprocessor system bus; 8-bit and 16-bit data (MULTIBUS I) - Part 3:Mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors (IEC 60796-3:1990)
|
| IEC 60079-27-2005
| 爆炸性氣體環境用電氣設備.第27部分:現場總線本質安全原理(FISCO)和現場總線不易燃原理(FNICO)
| Electrical apparatus for explosive gas atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) and Fieldbus non-incendive concept (FNICO)
|
| IEC 60439-2 AMD 1-2005
| 低壓開關設備和控制設備組合裝置.第2部分:母線干線系統總線的特殊要求.修改件1
| Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways); Amendment 1
|
| IEC 60439-2 Edition 3.1-2005
| 低壓開關設備和控制設備組合裝置.第2部分:母線干線系統總線的特殊要求
| Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways)
|
| IEC 60439-2-2000
| 低壓開關設備和控制設備組合裝置 第2部分:母線干線系統總線的特殊要求
| Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways)
|
| IEC 60552 AMD 1-1984
| 計算機輔助測量與控制 多機箱系統組織 分支總線和A1型計算機輔助測量與控制機箱控制器規范 修改1
| CAMAC - Organization of multi-crate systems. Specifications of the Branch-highway and CAMAC crate controller Type A1
|
| IEC 60552-1977
| 計算機輔助測量與控制 多機箱系統組織 分支總線和A1型計算機輔助測量與控制機箱控制器規范
| CAMAC - Organization of multi-crate systems. Specifications of the Branch-highway and CAMAC crate controller Type A1
|
| IEC 60728-7-3-2003
| 電視信號、聲音信號和交互信號設備用電纜網絡.第7-3部分:混合光纖同軸電纜外部線纜狀況監測.電力轉發器接口
| Cable networks for television signals, sound signals and interactive services - Part 7-3: Hybrid Fibre Coax Outside Plant Status Monitoring; Power supply to transponder interface bus (PSTIB) specification
|
| IEC 60796-1-1990
| 微處理機系統總線 8位和16位數據(MULTIBUS) 第1部分:電氣和定時規范的功能描述
| Microprocessor system bus; 8-bit and 16-bit data (MULTIBUS I); part 1: functional description with electrical and timing specifications
|
| IEC 60796-2-1990
| 微處理機系統總線 8位和16位數據(MULTIBUS) 第2部分:采用邊緣連接器(直接配合)作為系統總線配置的機械和插
| Microprocessor system bus; 8-bit and 16-bit data (MULTIBUS I); part 2: mechanical and pin descriptions for the system bus configuration, with edge connectors (direct)
|
| IEC 60796-3-1990
| 微處理機系統總線 8位和16位數據(MULTIBUS) 第3部分:采用插針和插座連接器(間接配合)作為歐洲卡配置的機械
| Microprocessor system BUS I, 8-bit and 16-bit data; part 3: mechanical and pin descriptions for the eurocard configuration with pin and socket (indirect) connectors
|
| IEC 60821 AMD 1-1999
| IEC 821 VME總線 1～4字節數據微處理機系統總線 修改1
| VMEbus - Microprocessor system bus for 1 byte to 4 byte data; Amendment 1
|
| IEC 60821-1991
| IEC 821 VME總線 1～4字節數據微處理機系統總線
| IEC 60821-VMEbus; microprocessor system bus for 1 byte to 4 byte data
|
| IEC 60822-1988
| IEC 821 VME總線的并行子系統總線
| IEC 60822 VSB; parallel sub-system bus of the IEC 60821 VMEbus
|
| IEC 60823-1990
| 微處理機系統總線(VME總線) IEC 821總線(VME總線)的串行子系統總線
| Microprocessor system bus (VMSbus); serial sub-system bus of the IEC 60821 bus (VMEbus)
|
| IEC 60864-2-1997
| 廣播發射機或發射機系統和監控設備之間互連的標準化 第2部分:采用數據總線互連的系統接口標準
| Standardization of interconnections between broadcasting transmitters or transmitter systems and supervisory equipment - Part 2: Interface standards for systems using data bus type interconnections
|
| IEC 60933-4-1994
| 音頻、視頻和視聽系統 互連和匹配值 第4部分:內部數字總線用連接器和接線點
| Audio, video and audiovisual systems - Interconnections and matching values - Part 4: Connector and cordset for domestic digital bus (D2B)
|
| IEC 61030 AMD 1-1993
| 音頻、視頻和視聽系統 家用數字總線 修改1
| Audio, video and audiovisual systems; domestic digital bus (D2B); amendment 1
|
| IEC 61030-1991
| 音頻、視頻和視聽系統 家用數字總線(D2B)
| Audio, video and audiovisual systems; domestic digital bus (D2B)
|
| IEC 61076-4-113-2002
| 電子設備連接器.印制板連接器.第4-113部分:總線裝置中印制板和背板用格柵為2.5mm的5列兩件式連接器的詳細規
| Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connector having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
|
| IEC 61158-2 Corrigendum 1-2004
| 勘誤1.測量和控制用數字數據通信.工業控制系統用現場總線.第2部分:物理層規范和服務定義
| Corrigendum 1 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 2: Physical layer specification and service definition
|
| IEC 61158-2-2003
| 測量和控制用數字數據通信.工業控制系統用現場總線.弟2部分:物理層規范和服務定義
| Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 2: Physical layer specification and service definition
|
| IEC 61158-3-2003
| 測量和控制用數字數據通信.工業控制系統用現場總線.第3部分:數據鏈路服務定義
| Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 3: Data link service definition
|
| IEC 61158-4 Corrigendum 1-2004
| 勘誤1.測量和控制用數字數據通信.工業控制系統用現場總線.第4部分:數據鏈路協議規范
| Corrigendum 1 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data link protocol specification
|
| IEC 61158-4-2003
| 測量和控制用數字數據通信.工業控制系統用現場總線.第4部分:數據鏈路協議規范
| Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data link protocol specification
|
| IEC 61158-5 Corrigendum 1-2004
| 勘誤1.測量和控制用數字數據通信.工業控制系統用現場總線.第5部分:應用層服務定義
| Corrigendum 1 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definition
|
| IEC 61158-5-2003
| 測量和控制用數字數據通信.工業控制系統用現場總線.第5部分:應用層服務定義
| Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definition
|
| IEC 61158-6 Corrigendum 1-2004
| 勘誤1.測量和控制用數字數據通信.工業控制系統用現場總線.第6部分:應用層協議規范
| Corrigendum 1 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application layer protocol specification
|
| IEC 61158-6-2003
| 測量和控制用數字數據通信.工業控制系統用現場總線.第6部分:應用層協議規范
| Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application layer protocol specification
|
| IEC 61301-1994
| 核儀器 NIM儀器用數據總線
| Nuclear instrumentation - Digital bus for NIM instruments
|
| IEC 61375-1-1999
| 道路電氣設備 列車總線 第1部分:列車通信網
| Electric railway equipment - Train bus - Part 1: Train Communication Network
|
| IEC 61784-1 Corrigendum 1-2004
| 勘誤1.測量和控制用數字數據通信.第1部分:與工業控制系統用現場總線相關的連續和不連續制造用輪廓圖集
| Corrigendum 1 - Digital data communications for measurement and control - Part 1: Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems
|
| IEC 61784-1-2003
| 測量和控制用數字數據通信.第1部分:與工業控制系統用總線相關的連續和不連續制造用線型控制裝置
| Digital data communications for measurement and control - Part 1: Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems
|
| IEC 62026-6-2001
| 低壓開關設備和控制設備 控制器 器件的接口（CDIs） 第6部分 ：Seriplex（串行多路控制總線）
| Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 6: Seriplex (Serial Multiplexed Control Bus)
|
| IEC/PAS 62030-2004
| 測量和控制用數字數據通信.工業控制系統用現場總線.第1節:MODBUS應用協議.規范V1.1a.第2節: 實時發行-定購.
| Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Section 1: MODBUS Application Protocol - Specification V1.1a - Section 2: Real-Time Publish-Subscribe; RTPS Wire Protocol Specification Version 1.0
|
| IEC/PAS 62453-2-2006
| 現場設備工具界面規范.第2部分:I網絡總線通訊(NTERBUS)
| Field Device Tool (FDT) interface specification - Part 2: INTERBUS communication
|
| IEC/PAS 62453-5-2006
| 現場設備工具界面規范.第5部分:現場總線基金會(FOUNDATION FIELDBUS)通訊
| Field device tool (FDT) interface specification - Part 5: FOUNDATION FIELDBUS communication
|
| IEC/TR 61158-1-2003
| 測量和控制用數字數據通信.工業控制系統用子段總線.第1部分:IEC 61158系列的綜述和指南
| Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 1: Overview anf guidance for the IEC 61158 series
|
| ISO 23570-2-2005
| 工業自動化系統和集成.工業設施的分布式安裝.第2部分:混合通信總線
| Industrial automation systems and integration - Distributed installation in industrial applications - Part 2: Hybrid communication bus
|
| ISO 6951-1986
| 信息處理 處理機系統總線接口(歐洲總線A)
| Information processing; Processor system bus interface (Eurobus A)
|
| ISO/IEC 10857-1994
| 信息技術 微處理機系統 未來總線 邏輯協議規范
| Information technology - Microprocessor systems - Futurebus+ - Logical protocol specification
|
| ISO/IEC 10861-1994
| 信息技術 微處理機系統 高性能同步32位總線:MULTIBUSⅡ
| Information technology - Microprocessor systems - High-performance synchronous 32-bit bus: MULTIBUS II
|
| ISO/IEC 11458 AMD 1-2000
| 信息技術 微處理機系統 VIC總線 板箱間電纜總線 補充1
| ()
|
| ISO/IEC 11458-1993
| 信息技術.微處理機系統.VIC總線.板箱間電纜總線
| Information technology; microprocessor systems; VICbus; inter-crate cable bus
|
| ISO/IEC 13213-1994
| 信息技術.微處理機系統.微處理機總線的控制和狀態登記(CSR)體系結構
| Information technology - Microprocessor systems - Control and Status Registers (CSR) architecture for microcomputer buses
|
| ISO/IEC 14576-1999
| 信息技術 同步分離傳送類型總線(ST總線) 邏輯層
| Information technology - Synchronous split transfer type system bus (Stbus) - Logical layer
|
| ISO/IEC 14776-232-2001
| 信息技術 小型計算機系統接口(SCSI) 第232部分：系列總線協議2 (SBP-2)
| Information technology - Small computer system interface (SCSI) - Part 232: Serial Bus Protocol 2 (SBP-2)
|
| ISO/IEC 15205-2000
| SBus-基片和模塊互連總線
| SBus - Chip and module interconnect bus
|
| ISO/IEC 15776-2001
| VME64總線.規范
| VME64bus - Specification
|
| JIS X6801-1998
| 同步分離傳遞型系統總線(STbus).邏輯層
| Synchronous split transfer type system bus (STbus) -- Logical layer |
| prEN 50159-1994
| 鐵路應用 對于使用串聯單總線的有關系統通信安全的基本要求
| Railway applications; basic requirements for safety related system communication using a serial single BUS
|
| prEN 61128-1993
| 交流隔離器 由隔離器轉變總線變換電流
| Alternating current disconnectors; bus-transfer current switching by disconnectors (IEC 61128:1992)
|
| prEN 61158-2-2003
| 工業控制系統用范圍總線標準 第2部分：物理層規范和服務定義
| Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 2: Physical layer specification (IEC 61158-2:200X - (65C/289/FDIS))
|
| prEN 61158-3-2003
| 測量和控制用數字數據通信 工業控制系統用現場總線 第3部分：數據鏈路服務定義
| Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 3: Data link layer service definition (IEC 61158-3:200X - (65C/290/FDIS))
|
| prEN 61158-4-2003
| 測量和控制用數字數據通信 工業控制系統用現場總線 第4部分：數據鏈路協議規范
| Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data link layer protocol specifications (IEC 61158-4:200X - (65C/291/FDIS))
|
| prEN 61158-5-2003
| 測量和控制用數字數據通信 工業控制系統用現場總線 第5部分：應用層服務定義
| Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definitions (IEC 61158-5:200X - (65C/292/FDIS))
|
| prEN 61158-6-2003
| 測量和控制用數字數據通信 工業控制系統用現場總線 第6部分：應用層協議規范
| Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application layer protocol specification (IEC 61158-6:200X - (65C/293/FDIS))
|
| 編號 | 中文名稱 | 英文名稱 |
|---|