| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60050-212-1990 | 國際電工詞匯 第212章:絕緣固體、液體和氣體 | International electrotechnical vocabulary; chapter 212: insulating solids, liquids and gases |
| IEC 60068-2-60-1995 | 環境試驗 第2-60部分:試驗 試驗Ke:流動混合氣體腐蝕試驗 | Environmental testing - Part 2: Tests - Test Ke: Flowing mixed gas corrosion test |
| IEC 60079-1-1-2002 | 易爆氣體環境中的電氣設備.第1-1部分:防火外殼"d".斷定最大實驗安全間隙的試驗方法 | Electrical apparatus for explosive gas atmospheres - Part 1-1: Flameproof enclosures "d"; Method of test for ascertainment of maximum experimental safe gap |
| IEC 60079-10-2002 | 爆炸性氣體環境用電氣設備.第10部分:危險場所的分類 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
| IEC 60079-14-2002 | 爆炸性氣體環境的電氣設備.第14部分:危險場所(礦井除外)中的電氣裝置 | Electrical apparatus for explosive gas atmospheres - Part 14: Electrical installations in hazardous areas (other than mines) |
| IEC 60079-15-2005 | 爆炸性氣體環境用電氣設備 第15部分:"n"防護型電氣設備的結構、試驗和標記 | Electrical apparatus for explosive gas atmospheres - Part 15: Construction, test and marking of type of protection "n" electrical apparatus |
| IEC 60079-18-2004 | 爆炸性氣體環境用電氣設備.第18部分:包封"m"型防護電氣設備的建造、試驗和標記 | Electrical apparatus for explosive gas atmospheres - Part 18: Encapsulation "m" |
| IEC 60079-25-2003 | 爆炸性氣體環境用電氣設備.第25部分:本質安全型系統 | Electrical apparatus for explosive gas atmospheres - Part 25: Intrinsically safe systems |
| IEC 60079-27-2005 | 爆炸性氣體環境用電氣設備.第27部分:現場總線本質安全原理(FISCO)和現場總線不易燃原理(FNICO) | Electrical apparatus for explosive gas atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) and Fieldbus non-incendive concept (FNICO) |
| IEC 60079-28-2006 | 爆炸性氣體.第28部分:用光輻射的傳輸系統和設備的保護 | Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
| IEC 60079-29-1-2007 | 爆炸性環境.第29-1部分:氣體探測器.易燃氣體探測器的性能要求 | Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases |
| IEC 60079-29-2-2007 | 爆燃性環境.第29-2部分:氣體探測器.易燃氣體和氧用探測器的選擇、安裝、使用和維護 | Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| IEC 60079-30-1-2007 | 易爆氣體.第30-1部分:電阻絲加熱.總則和試驗要求 | Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
| IEC 60079-30-2-2007 | 易爆氣體.第30-2部分:電阻絲加熱.設計、安裝和維護應用指南 | Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance |
| IEC 60079-4 AMD 1-1995 | 爆炸性氣體環境用電氣設備 第4部分:引燃溫度試驗方法 修改1 | Electrical apparatus for explosive gas atmospheres - Part 4: Method of test for ignition temperature; Amendment 1 |
| IEC 60079-4-1975 | 爆炸性氣體環境用電氣設備 第4部分:引燃溫度試驗方法 | Electrical apparatus for explosive gas atmospheres. Part 4 : Method of test for ignition temperature |
| IEC 60079-4A-1970 | 爆炸性氣體環境用電氣設備 第4部分:引燃溫度試驗方法 補充1 | Electrical apparatus for explosive gas atmospheres. Part 4 : Method of test for ignition temperature. First supplement |
| IEC 60141-3 AMD 1-1967 | 充油電纜和壓氣電纜及其附件的試驗 第3部分:交流電壓275kV以下外壓氣(氣體壓縮)電纜及其附件 修改1 | Test on oil-filled and gas-pressure cables and their accessories. Part 3 : External gas-pressure (gas compression) cables and accessories alternating voltage up to 275 kV |
| IEC 60141-3-1963 | 充油電纜和壓氣電纜及其附件的試驗 第3部分:交流電壓275kV以下外壓氣(氣體壓縮)電纜及其附件 | Test on oil-filled and gas-pressure cables and their accessories. Part 3 : External gas-pressure (gas compression) cables and accessories alternating voltage up to 275 kV |
| IEC 60231C-1974 | 核反應堆儀表一般原則 補充3:石墨慢化氣體冷卻反應堆儀表 | General principles of nuclear reactor instrumentation |
| IEC 60231E-1977 | 核反應堆儀表一般原則 補充5:間接循環高溫氣體冷卻反應堆儀表原則 | General principles of nuclear reactor instrumentation. Fifth supplement: Gascooled high temperature power reactor with indirect-cycle turbines |
| IEC 60335-2-102-2004 | 家用和類似用途電器的安全.第2-102部分:有電連接的氣體、油和固體燃燒燃燒設備的特殊要求 | Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
| IEC 60512-11-14-2003 | 電子設備用連接器.試驗和測量.第11-14部分:氣候試驗.試驗11p:流動單氣體腐蝕試驗 | Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests; Test 11p: Flowing single gas corrosion test |
| IEC 60512-11-7-2003 | 電子設備用連接器.試驗和測量方法.第11-7部分:氣候試驗.試驗11g:流動混合氣體腐蝕試驗 | Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests; Test 11g: Flowing mixed gas corrosion test |
| IEC 60567-2005 | 充油電氣設備.分析游離氣體和溶解氣體用氣體和油的取樣.指南 | Oil-filled electrical equipment - Sampling of gases and of oil for the analysis of free and dissolved gases - Guidance |
| IEC 60599 AMD 1-2007 | 使用中的浸漬礦物油的電氣設備.溶解和游離氣體分析的解釋指南.修改件1 | Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis; Amendment 1 |
| IEC 60599 Edition 2.1-2007 | 使用中的浸漬礦物油的電氣設備.溶解和游離氣體分析結果解釋的指南 | Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis |
| IEC 60599-1999 | 使用中的浸漬礦物油的電氣設備 溶解和游離氣體分析結果解釋的導則 | Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis |
| IEC 60730-2-17 AMD 1-2000 | 家用和類似用途的自動電氣控制.第2-17部分:電氣操作氣體閥門的特殊要求,包括機械要求.修改件1 | Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements; Amendment 1 |
| IEC 60749-7 Corrigendum 1-2003 | 半導體器件.機械和氣候試驗方法.第7部分:其他殘余氣體的分析和內部含水量的測量 | Semiconductor devices - Mechanical and climatic test methods - Part 7: Internal moisture content measurement and the analysis of other residual gases |
| IEC 60749-7-2002 | 半導體器件.機械和氣候試驗方法.第7部分:其他殘余氣體的分析和內部水分含量的測量 | Semiconductor devices - Mechanical and climatic test methods - Part 7: Internal moisture content measurement and the analysis of other residual gases |
| IEC 60754-1-1994 | 電纜燃燒時釋出的氣體的試驗 第1部分:氫鹵酸氣體量的測定 | Test on gases evolved during combustion of materials from cables; part 1: determination of the amount of halogen acid gas |
| IEC 60754-2 AMD 1-1997 | 電纜燃燒時釋出的氣體的試驗 第2部分:通過測量pH值和電導率來測定在取自電纜的材料燃燒時釋出的氣體的酸度 | Test on gases evolved during combustion of electric cables - Part 2: Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity; Amendment 1 |
| IEC 60754-2-1991 | 電纜燃燒時釋出的氣體的試驗 第2部分:通過測量pH值和電導率來測定在取自電纜的材料燃燒時釋出的氣體的酸度 | Test on gases evolved during combustion of electric cables; part 2: determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity |
| IEC 60761-3-2002 | 氣態排出流放射性連續監視設備.第3部分:惰性氣體排出流監視儀的特殊要求 | Equipment for continuous monitoring of radioactivity in gaseous effluents - Part 3: Specific requirements for radioactive noble gas monitors |
| IEC 60951-2-1988 | 核電廠事故和事故后的輻射監測設備 第2部分:氣態排出物中放射性惰性氣體的連續監測設備 | Radiation monitoring equipment for accident and post-accident conditions in nuclear power plants. Part 2: Equipment for continously monitoring radioactive noble gases in gaseous effluents |
| IEC 60974-8-2004 | 弧焊設備.第8部分:焊接和等離子切割系統用氣體控制臺 | Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems |
| IEC 61181-2007 | 填充礦物油的電氣設備.溶解氣體分析(DGA)用于電氣設備工廠試驗 | Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment |
| IEC 61207-1-1994 | 氣體分析器性能表示 第1部分:總則 | Expression of performance of gas analyzers; part 1: general |
| IEC 61207-2 Corrigendum 1-1994 | 氣體分析器性能表示.第2部分:氣體中的氧(利用高溫電化學傳感器) | Expression of performance of gas analyzers - Part 2: Oxygen in gas (utilizing high-temperature electrochemical sensors) |
| IEC 61207-2-1994 | 氣體分析器性能表示 第2部分:氣體中的氧(利用高溫電化學傳感器) | Expression of performance of gas analyzers - Part 2: Oxygen in gas (utilizing high-temperature electrochemical sensors) |
| IEC 61207-3 Corrigendum 1-2003 | 氣體分析器.性能表示.第3部分:順磁氧氣分析器 | Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers |
| IEC 61207-3 Corrigendum 2-2003 | 氣體分析器.性能表示.第3部分:順磁氧氣分析器 | Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers |
| IEC 61207-3-2002 | 氣體分析器.性能表示.第3部分:順磁氧氣分析器 | Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers |
| IEC 61207-6-1994 | 氣體分析器性能表示 第6部分:光度分析器 | Expression of performance of gas analyzers; part 6: photometric analyzers |
| IEC 61347-2-10-2000 | 燈的控制裝置 第2-10部分:高頻冷起動管形氣體放電燈(霓虹燈管)用電子逆變器和變流器的特殊要求 | Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) |
| IEC 61347-2-9 Edition 1.1-2003 | 燈的控制裝置.第2-9部分:氣體放電燈(熒光燈除外)用鎮流器的特殊要求 | Lamp controlgear - Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) |
| IEC 61347-2-9-2000 | 燈的控制裝置 第2-9部分:氣體放電燈(熒光燈除外)用鎮流器的特殊要求 | Lamp controlgear - Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) |
| IEC 62035-1999 | 氣體放電燈(熒光燈除外) 安全規范 | Discharge lamps (excluding fluorescent lamps) - Safety specifications |
| IEC 62086-1 Corrigendum 1-2003 | 爆炸性氣體環境用電氣設備.電阻輕微加熱.第1部分:一般要求和測試要求 | Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 1: General and testing requirements |
| IEC 62259-2003 | 含堿或其他非酸性電解質的蓄電池和蓄電池組.部分氣體復合的鎳鎘柱狀二次單電池 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Nickel-cadmium prismatic secondary single cells with partial gas recombination |
| IEC 62271-203-2003 | 高壓開關設備和控制設備.第203部分:額定電壓為52kV以上的氣體絕緣金屬封閉式開關設備 | High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV |
| IEC 62271-207-2007 | 高壓開關裝置和控制裝置.第207部分:額定電壓大于52kV氣體絕緣開關裝置組件用抗地震能力 | High-voltage switchgear and controlgear - Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV |
| IEC 62271-209-2007 | 高壓開關裝置和控制裝置.第209部分:額定電壓52kV以上的氣體絕緣金屬外殼開關裝置用電纜連接件.充液和擠壓絕 | High-voltage switchgear and controlgear - Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable-terminations |
| IEC 62302-2007 | 輻射防護儀器.放射性惰性氣體的取樣和監測用設備 | Radiation protection instrumentation - Equipment for sampling and monitoring radioactive noble gases |
| IEC/TR 60079-12-1978 | 爆炸性氣體環境用電氣設備 第12部分:氣體或蒸汽與空氣的混合物按其最大實驗安全間隙和最小引燃電流的分類 | Electrical apparatus for explosive gas atmospheres. Part 12 : Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents |
| IEC/TR 60079-13-1982 | 爆炸性氣體環境用電氣設備 第13部分:正壓保護的房間或建筑物的結構和使用 | Electrical apparatus for explosive gas atmospheres. Part 13 : Construction and use of rooms or buildings protected by pressurization |
| IEC/TR 60079-16-1990 | 爆炸性氣體環境用電氣設備 第16部分:保護分析儀器房屋的人工通風 | Electrical apparatus for explosive gas atmospheres; part 16: artificial ventilation for the protection of analyzer(s) houses |
| IEC/TR 61010-3-042-1999 | 測量、控制及實驗室用電氣設備的安全要求 第3-042部分:IEC 61010-2-042:1997《醫療材料處理和實驗室加工用 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-042: Conformity verification report for IEC 61010-2-042:1997 - Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials, and for laboratory processes |
| IEC/TR 61010-3-043-2001 | 測量、控制和實驗室用電氣設備的安全要求 第3-043部分：IEC61010-2-043：1997《醫療材料處理和實驗室加工 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-043: Conformity verification report for IEC 61010-2-043:1997; Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the treatment of medical materials and for laboratory processes |
| IEC/TR 61081-1991 | 由過程伴生氣體驅動的氣動儀器 安全安裝和操作程序 指南 | Pneumatic instruments driven by associated process gas; safe installation and operating procedures; guidelines |
| IEC/TR2 61464 Corrigendum 1-2003 | 絕緣套管.油作為主絕緣(普通紙)浸漬介質的套管中溶解氣體分析(DGA)的說明指南 | Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the main insulation (generally paper) |
| IEC/TR2 61464-1998 | 絕緣套管 油作為主絕緣(普通紙)浸漬介質的套管中溶解氣體分析(DGA)的說明指南 | Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the main insulation (generally paper) |
| IEC/TR2 61639-1996 | 額定電壓72 5kV及以上氣體絕緣金屬封閉開關設備和電力變壓器之間的直接連接 | Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above |
| IEC/TR2 61640-1998 | 額定電壓72 5kV及以上的高壓氣體絕緣硬輸電線 | Rigid high-voltage, gas-insulated transmission lines for rated voltage of 72,5 kV and above |
| IEC/TR3 60079-20-1996 | 爆炸性氣體環境用電氣設備 第20部分:與電氣設備的使用有關的可燃性氣體和蒸氣的數據 | Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus |
| ISO 10062-2006 | 人工環境中特低濃度污染氣體的腐蝕試驗 | Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) |
| ISO 10083-2006 | 醫用氣體管道系統用濃縮氧氣供應系統 | Oxygen concentrator supply systems for use with medical gas pipeline systems |
| ISO 10156-1996 | 氣體和氣體混合物 為選擇氣瓶閥出氣口測定氣體的潛在燃燒性和氧化能力 | Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets |
| ISO 10156-2-2005 | 儲氣瓶.氣體和氣體混合物.第2部分:有毒和腐蝕性氣體和氣體的氧化性的測定 | Gas cylinders - Gases and gas mixtures - Part 2: Determination of oxidizing ability of toxic and corrosive gases and gas mixtures |
| ISO 10298-1995 | 氣體或混合氣體的毒性測定 | Determination of toxicity of a gas or gas mixture |
| ISO 10381-7-2005 | 土質.取樣.第7部分:土壤氣體取樣指南 | Soil quality - Sampling - Part 7: Guidance on sampling of soil gas |
| ISO 10396-2007 | 固定源排放.固定安裝的監測系統自動測定氣體排放濃度的抽樣 | Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems |
| ISO 10439-2002 | 石油、化學和氣體工業.離心壓縮機 | Petroleum, chemical and gas service industries - Centrifugal compressors |
| ISO 10442-2002 | 石油、化學和氣體設備工業.包裝的整體式齒輪分離空氣壓縮機 | Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors |
| ISO 10524-1-2006 | 醫用氣體設備用的壓力調節器.第1部分:壓力調節器和帶流量計的壓力調節器 | Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices |
| ISO 10524-2-2005 | 醫用氣體用壓力調節器.第2部分:進氣壓力調節器和線性壓力調節器 | Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators |
| ISO 10524-3-2005 | 醫用氣體設備用的壓力調節器.第3部分:帶氣瓶閥的壓力調節器 | Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves |
| ISO 10651-5-2006 | 醫用肺通氣機.基本安全和性能的特殊要求.第5部分:氣體驅動急救人工呼吸器 | Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 5: Gas-powered emergency resuscitators |
| ISO 10720-1997 | 鋼和鐵 氮含量的測定 惰性氣體流中熔解物的熱傳導法 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas |
| ISO 10790 AMD 1-2003 | 封閉導管中液體流量的測量.科里奧利計的選擇、安裝和使用指南(流量、密度和容量的測量).修改1:氣體測量指南 | Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements); Amendment 1: Guidance for gas measurement |
| ISO 10882-1-2001 | 焊接和相關工藝的衛生和安全 操作人員呼吸區域的空氣中懸浮顆粒物及氣體的取樣 第1部分：空氣中懸浮顆粒 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles |
| ISO 10882-2-2000 | 焊接和相關工藝的衛生與安全 工作人員呼吸區域中空氣中懸浮顆粒物及氣體的取樣 第2部分:氣體取樣 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases |
| ISO 11114-1-1997 | 移動氣瓶 氣瓶和瓶閥材料與盛裝氣體的相容性 第1部分:金屬材料 | Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials |
| ISO 11114-2-2000 | 移動氣瓶 氣瓶和瓶閥材料與盛裝氣體的相容性 第2部分:非金屬材料 | Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials |
| ISO 11114-3-1997 | 移動氣瓶 氣瓶和瓶閥材料與盛裝氣體的相容性 第3部分:氧環境中自燃試驗 | Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test in oxygen atmosphere |
| ISO 11114-4-2005 | 移動氣瓶.氣瓶和瓶閥材料與盛裝氣體的相容性.第4部分:選擇抗氫脆金屬材料的試驗方法 | Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement |
| ISO 11195-1995 | 醫用氣體混合器 獨立氣體混合器 | Gas mixers for medical use - Stand-alone gas mixers |
| ISO 11755-2005 | 儲氣瓶.集裝壓縮氣體和液化氣體氣瓶(乙炔除外).充裝時的檢驗 | Gas cylinders - Cylinder bundles for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling |
| ISO 1183-3-1999 | 塑料 非泡沫塑料的密度測定方法 第3部分:氣體比重瓶法 | Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method |
| ISO 11933-4-2001 | 密封箱室部件 第4部分：通風和氣體清潔系統，諸如：過濾器、捕獲器、安全和調節閥、控制和保護器件 | Components for containment enclosures - Part 4: Ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices |
| ISO 12569-2000 | 建筑物熱性能 建筑物的換氣率測定 示蹤氣體稀釋法 | Thermal performance of buildings - Determination of air change in buildings - Tracer gas dilution method |
| ISO 13338-1995 | 氣體和氣體混合物的腐蝕性測定 | Determination of tissue corrosiveness of a gas or gas mixture |
| ISO 13631-2002 | 石油和天然氣工業.包裝用往復式氣體壓縮機 | Petroleum and natural gas industries - Packaged reciprocating gas compressors |
| ISO 13641-1-2003 | 水質.厭氣菌的氣體生成的抑制測定.第1部分:一般試驗 | Water quality - Determination of inhibition of gas production of anaerobic bacteria - Part 1: General test |
| ISO 13641-2-2003 | 水質.厭氣菌的氣體生成的抑制測定.第2部分:低生物量濃度試驗 | Water quality - Determination of inhibition of gas production of anaerobic bacteria - Part 2: Test at low biomass concentrations |
| ISO 14064-1-2006 | 溫室氣體.第1部分:溫室氣體輻射和消除的量化和報告規范與組織級指南 | Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals |
| ISO 14064-2-2006 | 溫室氣體.第2部分:溫室氣體輻射降低或消除增強的量化、監測和報告的規范與設計級指南 | Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements |
| ISO 14064-3-2006 | 溫室氣體.第3部分:溫室氣體確定的證實和驗證的規范與指南 | Greenhouse gases - Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions |
| ISO 14065-2007 | 溫室氣體.認證或承認的其他形式用溫室氣體確認和驗證機構的要求 | Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition |
| ISO 14164-1999 | 固定源排放 管道路氣體流速的測定 自動監測方法 | Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method |
| ISO 14175-1997 | 焊接耗材 弧焊及切割用保護氣體 | Welding consumables - Shielding gases for arc welding and cutting |
| ISO 14341-2002 | 焊料.非合金鋼和細粒鋼金屬氣體保護焊用焊絲和溶敷金屬.分類 | Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification |
| ISO 14344-2002 | 焊接和有關處理.焊劑和氣體保護弧焊法.消耗品的采購導則 | Welding and allied processes - Flux and gas shielded electrical welding processes - Procurement guidelines for consumables |
| ISO 14520-1 Technical Corrigendum 1-2007 | 氣體滅火系統.物理特性和系統設計.第1部分:一般要求.技術勘誤1 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 1: General requirements; Technical Corrigendum 1 |
| ISO 14520-1-2006 | 氣體滅火系統.物理特性和系統設計.第1部分:一般要求 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 1: General requirements |
| ISO 14520-10-2005 | 氣體滅火系統.物理特性和系統設計.第10部分:HFC 23滅火劑 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 10: HFC 23 extinguishant |
| ISO 14520-11-2005 | 氣體滅火系統.物理特性和系統設計.第11部分:HFC 236fa滅火劑 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 11: HFC 236fa extinguishant |
| ISO 14520-12-2005 | 氣體滅火系統.物理特性和系統設計.第12部分:IG-01滅火劑 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 12: IG-01 extinguishant |
| ISO 14520-13-2005 | 氣體滅火系統.物理特性和系統設計.第13部分:IG-100滅火劑 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 13: IG-100 extinguishant |
| ISO 14520-14-2005 | 氣體滅火系統.物理特性和系統設計.第14部分:IG-55滅火劑 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 14: IG-55 extinguishant |
| ISO 14520-15-2005 | 氣體滅火系統.物理特性和系統設計.第15部分:IG-541滅火劑 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 15: IG-541 extinguishant |
| ISO 14520-2-2006 | 氣體滅火系統.物理特性和系統設計.第2部分:CF3I滅火劑 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 2: CF3I extinguishant |
| ISO 14520-5-2006 | 氣體滅火系統.物理特性和系統設計.第5部分:FK-5-1-12滅火劑 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 5: FK-5-1-12 extinguishant |
| ISO 14520-6-2006 | 氣體滅火系統.物理特性和系統設計.第6部分:HCFC混合A的滅火劑 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 6: HCFC Blend A extinguishant |
| ISO 14520-8-2006 | 氣體滅火系統.物理特性和系統設計.第8部分:HFC 125滅火劑 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 8: HFC 125 extinguishant |
| ISO 14520-9-2006 | 氣體滅火系統.物理特性和系統設計.第9部分:HFC 227ea滅火劑 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 9: HFC 227ea extinguishant |
| ISO 14531-1-2002 | 塑料管道和配件.氣體燃料運輸用交聯聚乙烯管道系統.米制系列.第1部分:管 | Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 1: Pipes |
| ISO 14531-2-2004 | 塑料管道和配件.氣體燃料運輸用交聯聚乙烯管道系統.米制系列.規范.第2部分:熱熔連接用配件 | Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 2: Fittings for heat-fusion jointing |
| ISO 14531-3-2006 | 塑料管道和配件.氣體燃料運輸用交聯聚乙烯管道系統.米制系列.規范.第3部分:機械連接用配件(包括PE-X/金屬轉 | Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 3: Fittings for mechanical jointing (including PE-X/metal transitions) |
| ISO 14531-4-2006 | 塑料管道和配件.氣體燃料運輸用交聯聚乙烯(PE-X)管道系統.米制系列.規范.第4部分:系統設計和安裝指南 | Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 4: System design and installation guidelines |
| ISO 14661 AMD 1-2002 | 工業用熱渦輪機(蒸汽渦輪機、氣體膨脹式輪機).一般要求.修改件A1:工業用熱渦輪機數據表 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) - General requirements; Amendment A1: Data sheets for thermal turbines for industrial applications |
| ISO 14912-2003 | 氣體分析.氣體混合成份數據的轉換 | Gas analysis - Conversion of gas mixture composition data |
| ISO 1496-3 AMD 1-2006 | 貨運集裝箱系列1.規范和試驗.第3部分:液體、氣體和加壓的干散料用液罐集裝箱.修改件1:外部限制(縱向)動態試 | Series 1 freight containers - Specification and testing - Part 3: Tank containers for liquids, gases and pressurized dry bulk; Amendment 1: Testing of the external restraint (longitudinal) dynamic |
| ISO 1496-3-1995 | 系列1集裝箱 技術要求與試驗 第3部分:液體、氣體及加壓干散貨用罐式集裝箱 | Series 1 freight containers - Specification and testing - Part 3: Tank containers for liquids, gases and pressurized dry bulk |
| ISO 15002-2000 | 醫用氣體管道系統終端裝置用氣流量測量裝置 | Flow-metering devices for connection to terminal units of medical gas pipeline systems |
| ISO 15011-1-2002 | 焊接和有關過程中的健康和安全.電弧焊接產生的取樣煙塵和氣體的實驗室方法.第1部分:顆粒煙塵分析的排放率測 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 1: Determination of emission rate and sampling for analysis of particulate fume |
| ISO 15011-2-2003 | 焊接和相關工藝中的保健和安全.對電弧焊產生的煙塵和氣體取樣的實驗室方法.第2部分:除臭氧外氣體的排放率的 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 2: Determination of emission rates of gases, except ozone |
| ISO 15011-4-2006 | 焊接和相關工藝的衛生和安全.煙塵和氣體取樣的實驗室方法.第4部分:煙塵數據單 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets |
| ISO 15105-2-2003 | 塑料.薄膜和薄板.氣體傳輸率的測定.第2部分:等壓法 | Plastics - Film and sheeting - Determination of gas transmission rate - Part 2: Equal-pressure method |
| ISO 15351-1999 | 鋼鐵.氮含量的測定.惰性氣體熔融熱導法(常規方法) | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) |
| ISO 15500-7-2002 | 道路車輛.壓縮天然氣(CNG)燃料系統元部件.第7部分:氣體噴射器 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 7: Gas injector |
| ISO 15616-3-2003 | 高質量焊接和切割用CO2激光射線機的驗收試驗.第3部分:氣體流量和壓力測量儀的校正 | Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure |
| ISO 15741-2001 | 色漆和清漆 海上和近海的非腐蝕氣體鋼管內側的減小摩擦涂層 | Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore pipelines for non-corrosive gases |
| ISO 15796-2005 | 氣體分析.分析偏差的調查和處理 | Gas analysis - Investigation and treatment of analytical bias |
| ISO 15860-2006 | 航天系統.氣體污染.現場試驗測量方法 | Space systems - Gas contamination - Measurement methods for field tests |
| ISO 15901-1 Technical Corrigendum 1-2007 | 用水銀孔率法和氣體吸附法測定固體材料的孔隙尺寸分布和孔隙率.第1部分:水銀孔率測量法.技術勘誤1 | Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 1: Mercury porosimetry; Technical corrigendum 1 |
| ISO 15901-1-2005 | 用水銀孔率法和氣體吸附法測定固體材料的孔隙尺寸分布和孔隙率.第1部分:水銀孔率測量法 | Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 1: Mercury porosimetry |
| ISO 15901-2 Technical Corrigendum 1-2007 | 用水銀孔率法和氣體吸附法測定固體材料孔徑分布和孔隙率.第2部分:用氣體吸附法分析介孔和微孔.技術勘誤1 | Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 2: Analysis of mesopores and macropores by gas adsorption; Technical Corrigendum 1 |
| ISO 15901-2-2006 | 用水銀孔率法和氣體吸附法測定固體材料的孔隙尺寸分布和孔隙率.第2部分:用氣體吸附法分析中孔和大孔 | Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 2: Analysis of mesopores and macropores by gas adsorption |
| ISO 15901-3-2007 | 用水銀孔率法和氣體吸附法測定固體材料的孔徑分布和孔隙率.第3部分:用氣體吸附法分析微孔 | Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 3: Analysis of micropores by gas adsorption |
| ISO 16010-2005 | 彈性密封件.傳送氣體燃料和烴類液體的管和配件用密封件的材料要求 | Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids |
| ISO 16183-2002 | 重型機車.未處理排氣的氣體排放測量和瞬變試驗條件下用部分流體稀釋系統測量粒子排放 | Heavy-duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions |
| ISO 16664-2004 | 氣體分析.校正氣體和氣體混合物的處理.指南 | Gas analysis - Handling of calibration gases and gas mixtures - Guidelines |
| ISO 16834-2006 | 焊接消耗品.高強度鋼的氣體保護電弧焊用焊絲電極、焊絲、焊條和沉積金屬.分類 | Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels - Classification |
| ISO 1691-1976 | 工業用硅酸鈉和硅酸鉀 碳酸鹽含量的測定 氣體容積法 | Sodium and potassium silicates for industrial use; Determination of carbonates content; Gas-volumetric method |
| ISO 17053-2005 | 鋼鐵.氧的測定.在惰性氣體中熔化后的紅外法 | Steel and iron - Determination of oxygen - Infrared method after fusion under inert gas |
| ISO 17353-2004 | 水質.選擇的有機化合物的測定.氣體色譜法 | Water quality - Determination of selected organotin compounds - Gas chromatographic method |
| ISO 17491-2002 | 防護服.對氣態和液態化學品的防護.防護服耐氣體和液體穿透性的測定 | Protective clothing - Protection against gaseous and liquid chemicals - Determination of resistance of protective clothing to penetration by liquids and gases |
| ISO 17632-2004 | 焊接消耗品.非合金鋼及細粒鋼氣體保護的和非氣體保護金屬弧焊用藥芯電極.分類 | Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification |
| ISO 17633-2004 | 焊接消耗品.不銹鋼和耐熱鋼的氣體保護和非氣體保護金屬弧焊用藥芯電極和焊條.分類 | Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification |
| ISO 17634-2004 | 焊接消耗品.耐蠕變鋼的氣體保護金屬電弧焊用管狀有芯焊條.分類 | Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification |
| ISO 18054-2004 | 鳶尾根莖油.鐵含量的測定.毛細管柱氣體色譜法 | Oils of orris rhizome (Iris pallida Lam. or Iris germanica L.) - Determination of irone content - Method using gas chromatography on a capillary column |
| ISO 18276-2005 | 焊接消耗品.高強度鋼的氣體保護和非氣體保護金屬極電弧焊用藥芯電極.分類 | Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels - Classification |
| ISO 18757-2003 | 細陶瓷(高級陶瓷、高級工業陶瓷).利用BET法通過氣體吸收率測定陶瓷粉末的比表面積 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method |
| ISO 19702-2006 | 燃燒廢物的毒性試驗.用FTIR氣體分析對燃燒廢氣中氣體和蒸氣的分析指南 | Toxicity testing of fire effluents - Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis |
| ISO 19703-2005 | 燃燒中有毒氣體的生成和分析.實驗室燃燒中物質產生、當量比和燃燒效率的計算 | Generation and analysis of toxic gases in fire - Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires |
| ISO 21010-2004 | 低溫容器.氣體/材料相容性 | Cryogenic vessels - Gas/materials compatibility |
| ISO 21207-2004 | 人工氣候下的腐蝕試驗.包括交替暴露于腐蝕促進氣體、中性鹽霧和干燥中的加速腐蝕試驗 | Corrosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying |
| ISO 21687-2007 | 鋁生產用含碳材料.以氮作為分析氣體用比重測量法(測定體積的)測定密度.固體材料 | Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials |
| ISO 21969-2005 | 同醫療氣體設備一起使用的高壓撓性連接 | High-pressure flexible connections for use with medical gas systems |
| ISO 23550-2004 | 氣體燃燒器和燃氣設備的安全和控制設備.一般要求 | Safety and control devices for gas burners and gas-burning appliances - General requirements |
| ISO 23551-1-2006 | 氣體燃燒器和燃氣設備用安全和控制裝置.特殊要求.第1部分:自動閥門 | Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 1: Automatic valves |
| ISO 23551-2-2006 | 氣體燃燒器和燃氣設備用安全和控制裝置.特殊要求.第2部分:壓力調節器 | Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 2: Pressure regulators |
| ISO 23551-3-2005 | 氣體燃燒器和燃氣設備用安全和控制設備.特殊要求.第3部分:氣動型燃氣/空氣比率控制器 | Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 3: Gas/air ratio controls, pneumatic type |
| ISO 23551-4-2005 | 氣體燃燒器和燃氣設備用安全和控制設備.特殊要求.第4部分:自動截止閥的閥門檢驗系統 | Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 4: Valve-proving systems for automatic shut-off valves |
| ISO 23552-1-2007 | 氣和/或油燃燒器及氣和/或油器具用安全和控制裝置.特殊要求.第1部分:電子型燃料/氣體比率控制 | Safety and control devices for gas and/or oil burners and gas and/or oil appliances - Particular requirements - Part 1: Fuel/air ratio controls, electronic type |
| ISO 2743-1986 | 釉瓷和搪瓷 耐鹽酸氣體冷凝腐蝕性的測定 | Vitreous and porcelain enamels; Determination of resistance to condensing hydrochloric acid vapour |
| ISO 32-1977 | 醫用氣瓶 瓶內氣體識別標志 | Gas cylinders for medical use; Marking for identification of content |
| ISO 3427-1976 | 氣體鹵代烴(液化氣) 取樣 | Gaseous halogenated hydrocarbons (liquefied gases); Taking of a sample |
| ISO 3649-1980 | 空氣或其他氣體的凈化設備 詞匯 兩種語言版 | Cleaning equipment for air or other gases; Vocabulary Bilingual edition |
| ISO 4524-2-2000 | 金屬覆蓋層 金和金合金電鍍層的試驗方法 第2部分:混合流動氣體(MFG)環境試驗 | Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 2: Mixed flowing gas (MFG) environmental tests |
| ISO 5145 AMD 1-2006 | 氣體和混合氣體用氣瓶閥出氣口.選擇和尺寸.修改件1：醫用氣體氣瓶閥出氣口 | Cylinder valve outlets for gases and gas mixtures - Selection and dimensioning; Amendment 1: Cylinder valve outles for gases for medical use |
| ISO 5145-2004 | 氣體和混合氣體氣瓶瓶閥出氣口.選擇和尺寸 | Cylinder valve outlets for gases and gas mixtures - Selection and dimensioning |
| ISO 5359-2000 | 醫用氣體用低壓軟管組件 | Low-pressure hose assemblies for use with medical gases |
| ISO 5918-1982 | 工業用氯氟化烴 惰性氣體含量的測定 氣相色譜法 一般原則 | Chlorofluorohydrocarbons for industrial use; Determination of inert gas content; Gas chromatographic method; General principles |
| ISO 6141-2000 | 氣體分析 標定氣體和混合氣體合格證書要求 | Gas analysis - Requirements for certificates for calibration gases and gas mixtures |
| ISO 6142-2001 | 氣體分析 標定用混合氣體的制備 稱重法 | Gas analysis - Preparation of calibration gas mixtures - Gravimetric method |
| ISO 6143-2001 | 氣體分析 測定并檢查標定用混合氣體成分的比較方法 | Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures |
| ISO 6144-2003 | 氣體分析.標定用混合氣體的制備.靜態容量法 | Gas analysis - Preparation of calibration gas mixtures - Static volumetric method |
| ISO 6145-1-2003 | 氣體分析.動態容量法制備標定用混合氣體.第1部分:校正方法 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration |
| ISO 6145-10-2002 | 氣體分析.用動態容積法標定氣體混合物的準備.第10部分:滲透法 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method |
| ISO 6145-11-2005 | 氣體分析.動態容量法制備標定用氣體混合物.第11部分:電化學生成法 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation |
| ISO 6145-2-2001 | 氣體分析 用動態容量法制備標定用混合氣體 第2部分：容量泵 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 2: Volumetric pumps |
| ISO 6145-4-2004 | 氣體分析.用動態容量法制備標定用混合氣體.第4部分:持續噴射器注入法 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method |
| ISO 6145-5-2001 | 氣體分析 用動態容量法制備標定用混合氣體 第5部分：毛細管校準儀器 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices |
| ISO 6145-6-2003 | 氣體分析.動態容量法制備校準用混合氣體.第6部分:臨界聲孔 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices |
| ISO 6145-7-2001 | 氣體分析 用動態容量法制備標定用混合氣體 第7部分：熱質流控制儀 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers |
| ISO 6145-8-2005 | 氣體分析.用動態容積法制備標定用氣體混合物.第8部分:擴散法 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method |
| ISO 6145-9 Technical Corrigendum 1-2002 | 氣體分析.用動態容積法標定氣體混合物的制備.第9部分:飽和法.技術勘誤 1 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method; Technical Corrigendum 1 |
| ISO 6145-9-2001 | 氣體分析 用動態容量法制備標定用混合氣體 第9部分：飽和法 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method |
| ISO 6184-2-1985 | 抑爆系統 第2部分:空氣中易燃氣體爆炸指數的測定 | Explosion protection systems; Part 2 : Determination of explosion indices of combustible gases in air |
| ISO 6184-3-1985 | 抑爆系統 第3部分:除粉塵/空氣和氣體/空氣混合物以外的燃料/空氣混合物爆炸指數的測定 | Explosion protection systems; Part 3 : Determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures |
| ISO 6327-1981 | 氣體分析 天然氣水露點的測定 用表面冷凝濕度計測定 | Gas analysis; Determination of the water dew point of natural gas; Cooled surface condensation hygrometers |
| ISO 636-2004 | 焊接消耗品.非合金鋼和細粒鋼的鎢惰性氣體焊用焊條、焊絲和溶敷金屬.分類 | Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification |
| ISO 6529-2001 | 防護服 化學品的防護 防護服耐液體和氣體滲透性的測定 | Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases |
| ISO 6551-1982 | 石油液體和氣體 動態測量的精度和可靠性 電脈沖數據和/或電子脈沖數據的電纜傳輸 | Petroleum liquids and gases; Fidelity and security of dynamic measurement; Cabled transmission of electric and/or electronic pulsed data |
| ISO 6584-1981 | 空氣及其他氣體的凈化設備 除塵器的分類 | Cleaning equipment for air and other gases; Classification of dust separators |
| ISO 6855-1983 | 道路車輛 裝有控制點火發動機裝置的機動自行車排出氣體污染物的測量方法 | Road vehicles; Measurement methods for gaseous pollutants emitted by mopeds equipped with a controlled ignition engine |
| ISO 6993-1-2006 | 輸送氣體燃料用埋設的、高耐沖擊的聚氯乙烯(PVC-HI)管道.第1部分:最大操作壓力為1巴(100 kPa)的管子 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa) |
| ISO 6993-2-2006 | 輸送氣體燃料用埋設的、高耐沖擊的聚氯乙烯(PVC-HI)管道.第2部分:最大操作壓力為200mbar(20 kPa)的管件 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa) |
| ISO 6993-3-2006 | 輸送氣體燃料用埋設的、高耐沖擊的聚氯乙烯(PVC-HI)管道.第3部分:最大操作壓力為1巴(100 kPa)的管件和鞍座 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa) |
| ISO 6993-4-2006 | 輸送氣體燃料用埋設的、高耐沖擊的聚氯乙烯(PVC-HI)管道.第4部分:設計、操作和安裝的實施規程 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 4: Code of practice for design, handling and installation |
| ISO 7396-1-2007 | 醫用氣體管道系統.第1部分:壓縮的醫用氣體和真空用管道系統 | Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum |
| ISO 7396-2-2007 | 醫用氣體管道系統.第2部分:麻醉用氣體凈化處理系統 | Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems |
| ISO 7504-2001 | 氣體分析 詞匯 | Gas analysis - Vocabulary |
| ISO 7589-2002 | 氣體分析.用動態容積法標定氣體混合物.第10部分:滲透法 | Photography - Illuminants for sensitometry - Specifications for daylight, incandescent tungsten and printer |
| ISO 8085-1-2001 | 輸送氣體燃料的聚乙烯管用的聚乙烯管件 公制系列 規范 第1部分：采用加熱工具的插口熔接管件 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series; Specifications - Part 1: Fittings for socket fusion using heated tools |
| ISO 8085-2 Technical Corrigendum 1-2001 | 輸送氣體燃料的聚乙烯管用的聚乙烯管件 公制系列 規范 第2部分：對熔接、采用加熱工具的插口熔接以及用 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series; Specifications - Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings; Technical Corrigendum 1 |
| ISO 8085-2-2001 | 輸送氣體燃料的聚乙烯管用的聚乙烯管件 公制系列 規范 第2部分：對熔接、采用加熱工具的插口熔接以及用 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series; Specifications - Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings |
| ISO 8085-3 Technical Corrigendum 1-2007 | 輸送氣體燃料的聚乙烯管用聚乙烯配件.米制系列.規范.第3部分:電熔配件.技術勘誤1 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series - Specifications - Part 3: Electrofusion fittings; Technical Corrigendum 1 |
| ISO 8085-3-2001 | 輸送氣體燃料的聚乙烯管用的聚乙烯管件 公制系列 規范 第3部分：電熔接管件 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series; Specifications - Part 3: Electrofusion fittings |
| ISO 8130-2-1992 | 粉末涂料 第2部分:用氣體比較比重瓶測定密度 | Coating powders; part 2: determination of density by gas comparison pyknometer (referee method) |
| ISO 8178-2-1996 | 往復式內燃機 排放測量 第2部分:氣體和顆粒排放物的現場測量 | Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions at site |
| ISO 8573-6-2003 | 壓縮空氣.第6部分:氣體污染物含量的試驗方法 | Compressed air - Part 6: Test methods for gaseous contaminant content |
| ISO 8835-3-2007 | 吸入式麻醉劑系統.第3部分:活性麻醉氣體清除系統的傳輸和容納系統 | Inhalational anaesthesia systems - Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems |
| ISO 8846-1990 | 小艇 電氣裝置 周圍可燃性氣體防燃防護 | Small craft - Electrical devices - Protection against ignition of surrounding flammable gases |
| ISO 8974-2002 | 塑料.酚醛樹脂.用氣體色譜法測定殘余酚的含量 | Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography |
| ISO 9170-1-1999 | 醫用氣體管道系統用終端設備 第1部分:供壓縮醫用設備和真空用的終端設備 | Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum |
| ISO 9170-2-1999 | 醫用氣體管道系統用終端設備 第2部分:麻醉氣體清除系統用的終端設備 | Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems |
| ISO 9277-1995 | 用BET氣體吸附法確定固體表面積 | Determination of the specific surface area of solids by gas adsorption using the BET method |
| ISO 9300-2005 | 用臨界流量文丘里噴嘴測定氣體流量 | Measurement of gas flow by means of critical flow Venturi nozzles |
| ISO 9360-1-2000 | 麻醉和呼吸設備 用于加濕人的呼吸氣體的熱濕交換器(HMEs) 第1部分:與250ml最小潮量一起使用的熱濕交換器 | Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml |
| ISO 9360-2-2001 | 麻醉和呼吸設備 用于加濕人的呼吸氣體的熱濕交換器(HMEs) 第2部分：用于氣管切開手術病人的最小潮氣量為2 | Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml |
| ISO 9692-1-2003 | 焊接和相關工藝.關于接縫準備的建議.第1部分:鋼的手動金屬電弧焊接、氣體保護金屬電弧焊、氣焊、TIG焊接和 | Welding and allied processes - Recommendations for joint preparation - Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels |
| ISO 9692-3-2000 | 焊接和相關工藝 接頭制備的建議 第3部分:鋁及鋁合金的金屬焊條惰性氣體保護焊和鎢焊條惰性氣體保護焊 | Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys |
| ISO 9931-1991 | 煤 直接燃煤系統中氣體輸送粉煤的采樣方法 | Coal; sampling of pulverized coal conveyed by gases in direct fire coal systems |
| ISO 9932-1990 | 紙和紙板 薄頁材料水蒸氣透過率的測定 動態氣流和靜態氣體擴散法 | Paper and board; determination of water vapour transmission rate of sheet materials; dynamic sweep and static gas methods |
| ISO 9951 Technical Corrigendum 1-1994 | 封閉管道中氣體流量的測量 技術勘誤1 | Measurement of gas flow in closed conduits - Turbine meters; Technical Corrigendum 1 |
| ISO 9951-1993 | 封閉管道中氣體流量的測量 渦輪計 | Measurement of glas flow in closed conduits; turbine meters |
| ISO/TS 10839-2000 | 供應氣體燃料的聚乙烯管材和管件 設計、搬運和安裝實施規范 | Polyethylene pipes and fittings for the supply of gaseous fuels - Code of practice for design, handling and installation |
| ISO/TS 11155-2-2002 | 道路車輛.乘員艙內空氣濾清器.第2部分:氣體過濾試驗 | Road vehicles - Air filters for passenger compartments - Part 2: Test for gaseous filtration |
| ISO/TS 14167-2003 | 氣體分析.校準混合氣體使用過程中的一般質量保證.指南 | Gas analysis - General quality assurance aspects in the use of calibration gas mixtures - Guidelines |
| ISO/TS 15011-5-2006 | 焊接和相關工藝的衛生和安全.煙塵和氣體取樣的實驗室法.第5部分:完全或部分有機材料組成的產品在焊接或切割 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials |
| ISO/TS 16922-2002 | 天然氣.添味氣體用導則 | Natural gas - Guidelines for odorizing gases |
| ISO/TS 18226-2006 | 塑料管材和管件.壓力4 MPa(40 bar)的供氣體燃料用加固熱塑管道系統 | Plastics pipes and fittings - Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar) |
| 編號 | 中文名稱 | 英文名稱 |