| 編號 | 中文名稱 | 英文名稱 |
|---|
| ANSI X3.163-1988
| 信息系統.接觸啟動/停止金屬膜片存儲盤.83333傳輸通量/道,外徑為130mm(5.118英寸),內徑為40mm(1.575英寸)
| Information Systems - Contact Start-Stop Metallic Film Storage Disk - 83 333 Flux Transitions Per Track 130-mm (5.118-in) Outer Diameter and 40-mm (1.575-in) Inner Diameter
|
| ANSI X3.179-1990
| 信息系統.接觸啟動/停止金屬膜片存儲盤.外徑為95mm(0.3740英寸)和內徑為25mm(0.984英寸),厚度為1.27mm(0.05
| Information Systems - Contact Start-Stop Metallic Thin-Film Storage Disk - 83 333 Flux Transitions per Track 95-mm (3.740-in) Outer Diameter and 25-mm (0.984-in) Inner Diameter and 1.27-mm (0.050-in) Thickness
|
| ANSI/IPC 4203-2002
| 作柔性印制線路和柔性粘合膜片覆蓋層用的涂粘合劑的絕緣膜
| Adhesive coated Dielectric Films for Use as Cover Sheets for Flexible Printed Wiring and Flexible Adhesive Bonding Films
|
| BS 2797-1976
| 煤氣表膜片用皮革規范
| Specification for leathers for gas meter diaphragms
|
| BS EN 13597-2003
| 鐵路設施.橡膠懸吊元件.氣動懸簧的橡膠膜片
| Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs
|
| BS EN 278-1991
| 采用壓力達200毫巴可燃?xì)怏w的家用器具膜片用橡膠材料規范
| Specification for rubber materials for diaphragms in domestic appliances using combustible gases up to 200 mbar
|
| DIN 28432-1996
| 真空技術.膜片真空泵驗收規范
| Vacuum technology - Acceptance specifications for diaphragm vacuum pumps
|
| DIN 53366-1983
| 塑料薄膜和膜片的檢驗.粘連強度的測定
| Testing of plastic films and sheetings; determination of blocking strength
|
| DIN EN 13597-2003
| 鐵路設施.橡膠懸吊元件.氣動懸吊彈橡膠膜片
| Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs; German version EN 13597:2003
|
| DIN EN 196500/A1-2002
| 分規范.包括空白詳細規范的膜片開關 EN 196501; 修改件 A1; 德文版本 EN 196500/A1:2001
| Sectional specification: Membrane switches including blank detail specification EN 196501; Amendment A1; German version EN 196500/A1:2001
|
| DIN EN 549-1995
| 燃?xì)庠罹吆腿細馄骶哂妹芊饧湍て南鹉z材料; 德文版本 EN 549:1994
| Rubber materials for seals and diaphragms for gas appliances and gas equipmemt; German version EN 549:1994
|
| DIN EN 837-3-1997
| 壓力計.第3部分:膜片和膜盒式壓力計.尺寸、測量技、要求和試驗
| Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-3:1996
|
| EN 13597-2003
| 鐵路設施 橡膠懸掛部件 氣壓懸掛彈簧橡膠膜片
| Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs
|
| HG/T 2178-1991
| 家用煤氣表橡膠膜片
| ()
|
| HG/T 3692-2001
| 金屬膜片式穩壓閥技術條件
| ()
|
| HG/T 3693-2001
| 橡膠膜片式穩壓閥技術條件
| ()
|
| ISO 11866-2-2005
| 乳和乳制品.推定大腸桿菌的菌落計數.第2部分:在44℃時利用膜片(進行的)菌落計數技術
| Milk and milk products - Enumeration of presumptive Escherichia coli - Part 2: Colony-count technique at 44 °C using membranes
|
| ISO 4929-1978
| 道路車輛 使用非石油基液壓制動液的液壓制動主液壓缸儲油器的膜片密封墊
| Road vehicles; Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid
|
| JB/T 5491-2005
| 膜片壓力表
| ()
|
| JB/T 7485-2007
| 金屬膜片
| Metal diaphragm
|
| JB/T 9147-1999
| 膜片聯軸器
| ()
|
| JIS D2610-2005
| 汽車部件.使用非石油基液壓制動液體的液壓制動主油缸儲油箱用膜片襯墊
| Automotive parts -- Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid
|
| NF D36-203-1991
| 制作200mbar以下壓力家用燃?xì)庠O(shè)備用膜片的橡膠材料.(歐洲標準 EN 278)
| (RUBBER MATERIALS FOR DIAPHRAGMS IN DOMESTIC APPLIANCES USING COMBUSTIBLE GASES UP TO 200 MBAR. (EUROPEAN STANDARD EN 278).)
|
| NF D36-205-1995
| 燃?xì)馄骶叩拿芊夂湍て孟鹉z材料
| (Rubber materials for seals and diaphragms for gas appliances and gas equipment.)
|
| NF F01-816-2003
| 鐵路設施.橡膠懸吊元件.氣動懸吊彈簧的橡膠膜片
| (Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs.)
|
| NF F18-805-1992
| 鐵路滾動器材.氣動懸置彈簧的橡膠膜片
| (RAILWAY ROLLING STOCK. RUBBER DIAPHRAGMS FOR PNEUMATIC SUSPENSION SPRINGS.)
|
| QC/T 249-1998(2005)
| 機械膜片式汽油泵試驗方法
| ()
|
| QC/T 478-1999(2005)
| 機械膜片式汽油泵凸緣的安裝尺寸
| ()
|
| prEN 13831-2000
| 供水系統中設備用帶內置膜片的封閉式膨脹容器
| Closed expansion vessels with built in diaphragm for installations in water systems
|
| 編號 | 中文名稱 | 英文名稱 |
|---|