| 編號 | 中文名稱 | 英文名稱 |
|---|
| BS EN 472-1995
| 壓力計.詞匯
| Pressure gauges - Vocabulary
|
| BS EN 837-1-1998
| 壓力計.波登壓力計.規格,計量,要求和試驗
| Pressure gauges - Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
|
| BS EN 837-2-1998
| 壓力計.壓力計的選擇和安裝推薦規范
| Pressure gauges - Selection and installation recommendations for pressure gauges
|
| BS EN 837-3-1998
| 壓力計.膜式壓力計和膜合式壓力計.尺寸、計量、要求和試驗
| Pressure gauges - Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing
|
| BS EN 12094-10-2003
| 固定消防系統.氣體滅火系統元件.壓力計和壓力開關的試驗方法和要求
| Fixed firefighting systems - Components for gas extinguishing systems - Requirements and test methods for pressure gauges and pressure switches
|
| BS EN 562-2003
| 氣焊設備.焊接、切割和相關工藝用壓力計
| Gas welding equipment - Pressure gauges used in welding, cutting and allied processes
|
| EN 837-1-1996+AC-1998
| 壓力計 第1部分：布登管式壓力計 尺寸、計量、要求和測試
| Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
|
| EN 837-2-1997
| 壓力計 第2部分：壓力計的選擇和安裝建議
| Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges
|
| EN 837-3-1996
| 壓力計 第3部分：薄膜和封裝壓力計 尺寸、計量、要求和測試
| Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing
|
| EN 12094-10-2003
| 固定式消防系統 氣體滅火系統的部件 第10部分：對壓力計壓力開關的要求及試驗方法
| Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches
|
| EN 562-2003
| 氣焊設備 焊接、切割和同類處理用壓力計
| Gas welding equipment - Pressure gauges used in welding, cutting and allied processes
|
| EN 50216-5-2002+A1-2002
| 電源變壓器及電抗器配件 第5部分：液位指示器 壓力計和流量指示器
| Power transformer and reactor fittings - Part 5: Liquid level, pressure devices and flow indicators
|
| GB/T 1226-2001
| 一般壓力表
| General pressure gauge
|
| GB/T 1227-2002
| 精密壓力表
| Accurate pressure gauge
|
| GB 14106-1993
| 鹵代烷滅火系統壓力表性能要求和試驗方法
| Halon fire extinguishing systems--Performance requirements and test methods for pressure gauges
|
| GB/T 18520-2001
| 植物保護機械噴霧機噴頭和壓力表的連接尺寸
| Equipment for crop protection--Sprayers--Connecting dimensions for nozzles and manometers
|
| GB/T 3751.1-1983
| 卡套式壓力表管接頭
| Connector for pressure gauge--Assembly
|
| GB/T 3751.2-1983
| 卡套式壓力表接頭體
| Connector for pressure gauge--Body
|
| GB/T 5645.1-1985
| 擴口式壓力表管接頭
| Flared type tube fittings--Connector for pressure gauge--Assembly
|
| GB/T 5645.2-1985
| 擴口式壓力表管接頭體
| Flared type tube fittings--Connector for pressuregauge--Body
|
| GB/T 8892-2005
| 壓力表用銅合金管
| Copper alloy tube for pressure gauge
|
| DIN 16261-2004
| 壓力表用帶內螺紋/內螺紋和內螺紋/外螺紋連接的PN 16旋塞
| PN 16 cocks with female/female and female/male connection for pressure gauges
|
| DIN 16262-2004
| 壓力表用帶調節螺母和軸套式連接的PN 6和PN 16旋塞
| PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges
|
| DIN 16263-2004
| 壓力表用帶調節螺母、軸套式連接和試驗連接的PN 16旋塞
| PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges
|
| DIN 16270-2004
| 壓力表用不帶試驗連接的PN 250和PN 400閥門
| PN 250 and PN 400 valves without test connection for pressure gauges
|
| ISO 5171-1995
| 焊接、切割及相關工藝用壓力表
| Pressure gauges used in welding, cutting and allied processes
|
| JIS F7003-1997
| 造船.船用壓力表的應用
| Shipbuilding -- Application of pressure gauges on board
|
| JIS B7505-1999
| 波登管壓力計
| Bourdon tube pressure gauges
|
| JIS E4118-2004
| 鐵路機車車輛用波登管壓力計
| Bourdon tube pressure gauges for railway rolling stock
|
| DIN 32503-1979
| 用于焊接、切割和相關工藝的外殼直徑為63mm的壓力測量儀( 壓力表)的保護罩.
| Protective caps for pressure gauges with case diameter 63 mm used in welding, cutting and allied processes
|
| DIN 75554-1992
| 壓力表
| Pressure gauges
|
| DIN EN 12645-1998
| 壓力表.汽車輪胎的壓力和充氣檢驗設備.計量、要求和試驗
| Pressure gauges - Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles - Metrology, requirements and testing; German version EN 12645:1998
|
| DIN 14421-2001
| 消防泵用壓力表(測壓表)
| Pressure gauges (manometer) for fire pumps
|
| DIN EN 562-2003
| 氣焊設備.焊接、切割和相關工藝用壓力表
| Gas welding equipment - Pressure gauges used in welding, cutting and allied processes; German version EN 562:2003
|
| DIN 16284-2004
| 壓力表及其附件用螺紋接套連接
| Nipple connections for pressure gauges and their accessories
|
| DIN 16287-2004
| 壓力表用閥門和旋塞的試驗連接用蓋
| Caps for test connection on valves and cocks for pressure gauges
|
| DIN 16283-2004
| 壓力表及其附件用調整螺母
| Adjusting nuts for pressure gauges and their accessories
|
| DIN 16271-2004
| 壓力表用帶試驗連接的PN 250和PN 400閥門
| PN 250 and PN 400 valves with test connection for pressure gauges
|
| DIN 16272-2004
| 壓力表用帶關閉試驗連接的PN 250和PN 400閥門
| PN 250 and PN 400 valves with shut-off test connection for pressure gauges
|
| DIN 16282-2004
| 壓力表及其附件用彎管
| Siphons for pressure gauges and their accessories
|
| BS 2G 113-1956
| 飛行器用進氣管壓力表規范
| Specification for manifold pressure gauges for aircraft
|
| JB/T 6804-2006
| 抗震壓力表
| Shock-resistant pressure gauge
|
| JB/T 7392-2006
| 數字壓力表
| Digital pressure instrument
|
| NF L72-310-1986
| 航空器材.圓盤式機載壓力表
| (Aircraft equipment. On board pressure indicator with round dials.)
|
| NF U16-101-1984
| 農用拖車.套管筒式單動作抓斗式起重拖車.系列25進氣壓力表(MPa)
| (250bar2,3型.互換尺寸 (AGRICULTURAL TRAILERS. SINGLE-ACTING TELESCOPIC TIPPING CYLINDERS. 25 MPA (250 BAR) SERIES. TYPLES 1,2 AND 3. INTERCHANGEABILITY DIMENSIONS.)
|
| NF E15-038-1989
| 工業壓力表.金屬指示壓力表.絕對壓力計
| (INDUSTRIAL PRESSURE GAUGES. METALLIC PRESSURE GAUGE INDICATORS. ABSOLUTE PRESSURE GAUGES.)
|
| NF B35-701-1962
| 實驗室用玻璃器皿.電離壓力表
| (LABORATORY GLASSWARE. IONISATION MANOMETERS.)
|
| JB/T 9275-1999
| 電接點膜盒壓力表
| ()
|
| JB/T 9271-1999
| 焊接、切割及類似工藝用壓力表
| ()
|
| JB/T 50040-1999
| 彈性式壓力表 可靠性技術要求與考核方法
| ()
|
| JB/T 599-2005
| 壓力表校驗器
| ()
|
| JB/T 5528-2005
| 壓力表標度及分劃
| ()
|
| JB/T 5491-2005
| 膜片壓力表
| ()
|
| JB/T 5527-2005
| 船用壓力表
| ()
|
| JB/T 8839.2-1999
| 內燃機用磁電式壓力表 試驗方法
| ()
|
| JB/T 10203-2000
| 遠傳壓力表
| ()
|
| JJG（石油） 32-94
| 耐（抗）震壓力表
| ()
|
| JB/T 7696.1-1995
| 工程機械用壓力表
| ()
|
| JB/T 6801-1993
| 壓力表阻尼器 技術條件
| ()
|
| JB/T 6805-1993
| 壓力表接點裝置 技術條件
| ()
|
| JB/T 8624-1997
| 隔膜式壓力表
| ()
|
| JB/T 8839.1-1999
| 內燃機用磁電式壓力表 技術條件
| ()
|
| JB/T 2001.22-1999
| 水系統 壓力表開關 型式與尺寸(PN=31.5MPa)
| ()
|
| JB/T 9842-1999
| 拖拉機、內燃機用彈簧管式壓力表
| ()
|
| JB/T 9273-1999
| 電接點壓力表
| ()
|
| JB/T 9277-1999
| 壓力表誤差表
| ()
|
| JB/T 9272-1999
| 氨壓力表
| ()
|
| JB/T 9274-1999
| 膜盒壓力表
| ()
|
| JB/T 9278-1999
| 壓力表齒輪傳動機構 技術條件
| ()
|
| JB/T 6385-2007
| 錐密封焊接式壓力表管接頭
| ()
|
| 編號 | 中文名稱 | 英文名稱 |
|---|