| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF A04-102-2003 | 鋼.表面粒度的縮微照相測定 | (Steels - Micrographic determination of the apparent grain size.) |
| NF A20-008-1986 | 鐵礦石.篩選的粒度分布測定 | (IRON ORES. DETERMINATION OF SIZE DISTRIBUTION BY SIEVING.) |
| NF B41-204-2002 | 工程陶瓷.單片陶瓷.一般特征和結構特征.第3部分:粒度和粒徑分布的測定(用線性截?cái)喾ū碚? | (Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 3 : determination of grain size and size distribution (characterized by the linear intercept method).) |
| NF B57-011-1973 | 軟木.未加工的軟木顆粒.粒度的分析 | (Cork. Granulated unprocessed cork. Granulometric analysis.) |
| NF E75-230-1996 | 粘合磨料.粒度分布的測定和名稱與符號.第1部分:粒度從F4至F220 | (Bonded abrasives. Determination and designation of grain size distribution. Part 1 : macrogrits F4 to F220.) |
| NF E75-231-1993 | 磨料粒度.取樣和裂解 | (ABRASIVE MACROGRAINS. DETERMINATION OF BULK DENSITY.) |
| NF E75-232-1993 | 磨料粒度.篩選試驗機 | (ABRASIVE GRAINS. SAMPLING AND SPLITTING.) |
| NF E75-234-1996 | 粘合磨料.粒度分布的測定和名稱與符號.第2部分:粒度從F230至F1200 | (BONDED ABRASIVES. DETERMINATION AND DESIGNATION OF GRAIN SIZE DISTRIBUTION. PART 2 : MICROGRITS F230 TO F1200.) |
| NF M03-021-1967 | 固體燃料.焦炭粒度測定 | (SOLID FUELS. SIZE ANALYSIS OF COKE.) |
| NF M03-040-1995 | 硬煤.用篩分進行粒度分析 | (Hard coal. Size analysis by sieving.) |
| NF P12-301-1999 | 砌筑體用砂漿的試驗方法.第1部分:粒度分布的測定(篩析法) | (METHODS OF TEST FOR MORTAR FOR MASONRY. PART 1 : DETERMINATION OF PARTICLE SIZE DISTRIBUTION (BY SIEVE ANALYSIS). (EUROPEAN STANDARD EN 1015-1).) |
| NF P18-622-2-1996 | 巖石粒度幾何性能的檢驗方法.第2部分:粒度分布測定.篩分振動分析.篩孔公稱尺寸 | (Tests for geometrical properties of aggregates. Part 2 : determination of particle size distribution. Test sieves, nominal size of apertures.) |
| NF P18-806-1989 | 水硬性混凝土建筑用的特殊產品.粘結料產品或合成樹脂基產品.灰末粒度尺寸的分析 | (SPECIAL PRODUCTS FOR HYDRAULIC CONCRETE CONSTRUCTIONS. BINDER- OR SINTHETIC RESIN BASED PRODUCTS. PARTICLE SIZE ANALYSIS OF POWDERS.) |
| NF P18-921-1-2002 | 混凝土結構的防護和維修用產品和系統.粒度分析.第1部分:預混合泥漿干組分的試驗方法 | (Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1 : Test method for dry components of premixed mortar.) |
| NF P18-921-2-1999 | 混凝土結構的保護和修復產品和系統.粒度分析.第2部分:聚合物粘結劑填充試驗方法 | (Products and systems for the protection and repair of concrete structures. Granulometry analysis. Part 2 : test method for fillers for polymer bonding agents.) |
| NF P94-040-1993 | 土壤.調查與試驗.鑒定粒狀材料的0/50mm粒度極的實用方法 | (SOILS : INVESTIGATION AND TESTING. PRACTICAL METHOD FOR IDENTIFYING THE 0/50 MM FRACTION OF A GRANULAR MATERIAL. DETERMINATION OF PARTICLE SIZE AND BLUE VALUE.) |
| NF P94-057-1992 | 土壤:調查和試驗.碳酸鹽含量的測定.顆粒度測定分析.液體比重計法 | (SOILS INVESTINGATION AND TESTING. GRANULOMETRIC ANALYSIS. HYDROMETER METHOD.) |
| NF T20-218-1987 | 主要用于生產鋁的氧化鋁.粒度分布(60um以下)測定.使用電成形篩法 | (ALUMINIUM OXIDE PRIMARILLY USED FOR THE PRODUCTION OF ALUMINIUM. DETERMINATION OF THE FINE PARTICLE SIZE DISTRIBUTION (LESS THAN 60 MICROMETERS). METHOD USING ELECTROFORMED SIEVES.) |
| NF T20-223-1973 | 主要用于鋁生產的氧化鋁.粒度分析.篩選法 | (ALUMINIUM OXIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM. PARTICLE SIZE ANALYSIS. SIEVING METHOD.) |
| NF T20-485-1973 | 工業三聚磷酸鈉和焦磷酸鈉.機械篩后的粒度分析 | (SODIUM TRIPOLYPHOSPHATE AND PYROPHOSPHATE FOR INDUSTRIAL USE. GRANULOMETRIC ANALYSIS BY MECHANICAL SIEVING.) |
| NF T70-332-1995 | 軍用高能材料.物理-化學分析及特性.烈性炸藥的水下手工篩分的粒度分布 | (ENERGETIC MATERIALS FOR DEFENSE. PHYSICAL-CHEMICAL ANALYSIS AND PROPERTIES. PARTICLE SIZE BY MANUAL UNDERWATER SCREENING OF HIGH EXPLOSIVES.) |
| NF T70-333-1995 | 軍用高能材料.物理-化學分析及特性.烈性炸藥的水下機械篩分的粒度分布 | (ENERGETIC MATERIALS FOR DEFENSE. PHYSICAL-CHEMICAL ANALYSIS AND PROPERTIES. PARTICLE SIZE BY UNDERWATER MECHANICAL SCREENING OF HIGH EXPLOSIVES.) |
| NF T70-334-1995 | 軍用高能材料.物理-化學分析及特性.烈性炸藥的干式機械篩分的粒度分布 | (ENERGETIC MATERIALS FOR DEFENSE. PHYSICAL-CHEMICAL ANALYSIS AND PROPERTIES. PARTICLE SIZE BY DRY MECHANICAL SCREENING OF HIGH EXPLOSIVES.) |
| NF T70-335-1995 | 軍用高能材料.物理-化學分析及特性.平均直徑的測定.亞篩粒度測定法 | (ENERGETIC MATERIALS FOR DEFENSE. PHYSICAL-CHEMICAL ANALYSIS AND PROPERTIES. DETERMINATION OF AVERAGE DIAMETER. METHOD WITH THE SUB-SIEVE-SIZER FISHER.) |
| NF U43-217-1981 | 農藥產品.“微粒“硫磺的粒度分析法 | (Agropharmaceutical products. Method of particle size determination for “micronized“ sulphurs.) |
| NF U44-182-2003 | 石灰處理材料.用干濕篩選法測定粒度分布 | (Liming materials - Determination of size distribution by dry and wet sieving.) |
| NF V03-308-1991 | 生咖啡.粒度分析.手工過篩 | (Green coffee. Size analysis. Manual sieving.) |
| NF V05-223-1986 | 速溶咖啡.粒度分析 | (INSTANT COFFEE. SIZE ANALYSIS.) |
| NF V37-030-1996 | 葉形煙草.煙草葉粒度的測定 | (LEAF TOBACCO. DETERMINATION OF STRIP PARTICLE SIZE.) |
| NF X11-601-1979 | 篩分和粒度.用滲透法對粉末的體積或單位面積進行測定.ＬＥＡ法和ＮＵＲＳＥ法 | (SIEVING AND GRANULOMETRY. DETERMINATION OF THE AREA PER UNIT OF MASS OR VOLUME OF POWDERS BY PERMEAMETRY. LEA AND NURSE METHOD.) |
| NF X11-630-2001 | 粒度分析.詞匯 | (Particle size analysis - Vocabulary.) |
| NF X11-632-1-1998 | 粒度分析結果的表示.第1部分:圖形表示 | (Representation of results of particle size analysis. Part 1 : graphical representation.) |
| NF X11-661-1990 | 粒度測定.粉粒大小的測定.光學顯微鏡法 | (Particle size analysis. Determination of particle size of powders. Optical microscope method.) |
| NF X11-670-1989 | 粒度測定.用電阻變化計數器對電解液中懸浮顆粒進行粒度分析 | (PARTICLE SIZE ANALYSIS IN AN ELECTROLYTIC SUSPENSION USING A RESISTANCE VARIATION COUNTER.) |
| NF X11-672-1996 | 粒度分析.相關光量子光譜學 | (PARTICLE SIZE ANALYSIS. PHOTON CORRELATION SPECTROSCOPY.) |
| NF X11-680-1-2001 | 用重力液體沉淀法測定粒度分布.第1部分:通用原則和導則 | (Determination of particle size distribution by gravitational liquid sedimentation methods - Part 1 : general principles and guidelines.) |
| NF X11-680-2-2001 | 用重力液體沉淀法測定粒度分布.第2部分:固定移液管法 | (Determination of particle size distribution by gravitational liquid sedimentation methods - Part 2 : fixed pipette method.) |
| NF X11-680-3-2001 | 用重力液體沉淀法測定粒度分布.第3部分:X射線重力技術 | (Determination of particle size distribution by gravitational liquid sedimentation methods - Part 3 : X-ray gravitational technique.) |
| NF X11-681-1982 | 粒度測定.由于液體重力沉淀進行粒度分析.滴管法 | (PARTICLE SIZE ANALYSIS. PARTICLE SIZE ANALYSIS BY GRAVITY SEDIMENTATION. PIPETTE METHOD.) |
| NF X11-685-1-2001 | 用離心液體沉淀法測定粒度分布.第1部分:通用原則和導則 | (Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 1 : general principles and guidelines.) |
| NF X31-107-2003 | 土質.通過沉淀作用測定粒度.移液管法 | (Soil quality - Particle size determination by sedimentation - Pipette method.) |
| NF X43-100-1996 | 空氣質量.保健抽樣用粒度級分定義 | (Air quality. Particle size fraction definitions for health-related sampling.) |
| 編號 | 中文名稱 | 英文名稱 |