| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 12000-1983 | 實驗室圖形符號及安全標志 | Graphic symbols and safety marking in laboratories |
| DIN 13312-2005 | 導航.概念、縮略語、字母符號、圖形符號 | Navigation - Concepts, abbreviations, letter symbols, graphical symbols |
| DIN 14034-3-1979 | 消防隊用圖形符號.第3部分:操作過程 | Graphical symbols for fire-brigade; control processes |
| DIN 14034-5-1979 | 消防用圖形符號.設備 | Graphical symbols for fire-brigade; equipments |
| DIN 14034-6-2005 | 消防用圖形符號.第6部分:建筑內部設備 | Graphical symbols for fire-brigade - Part 6: Equipments in buildings |
| DIN 15560-6-1984 | 電影、電視、舞臺和攝影用聚光燈.演播室和舞臺用發光板和印花板照明的圖形符號 | Projectors for film and television, stage and photographic use; graphical symbols for studio and stage luminaries on lighting plans and stencil |
| DIN 16524-7-2001 | 圖形印刷和油墨檢驗.抗各種理化影響.第7部分:飲料瓶標簽熱堿溶液試驗.耐堿性溶液性能 | Testing of prints and inks for graphic technology - Resistance to various physical and chemical influences - Part 7: Behaviour of labels for beverage bottles on exposure to hot alkaline solution, resistance to alkaline solution |
| DIN 16549-1-1996 | 圖形技術.預印制.第1部分:圖形校對符號和補充說明 | Graphic technology - Prepress printing process - Part 1: Correction marks for images and additional marking |
| DIN 18005-2-1991 | 城市規劃中的噪音抑制.噪音圖.噪音污染的圖形表示法 | Noise abatement in town planning; noise maps; graphical representation of noise pollution |
| DIN 19045-3-1998 | 幻燈片和電影片的放映.第3部分:放映原的圖素,線條寬度以及字體和圖形符號大小的最小尺寸 | Projection of still pictures and motion-pictures - Part 3: Minimum dimensions for elements, width of lines, dimensions of lettering and graphical symbols in originals for projection |
| DIN 19045-6-1985 | 教育和家庭用幻燈片和電影片的放映.圖形符號 | Projection of still pictures and motion-pictures in educational and amateur use; graphical symbols |
| DIN 19046-2 Bb.1-1977 | 舞臺放映.平面屏幕上的傾斜放映.實際應用的圖形和列線圖 | Stage projection; oblique projection on plane screens, drawings and nomograms for use in practice |
| DIN 19051-20-1991 | 縮微照相用測試圖形卡.第20部分:確定圖紙縮微攝影條件的曝光試樣 | Test patterns for micrography; test exposures made to establish the conditions for microfilming of drawings |
| DIN 19051-21-1991 | 縮微照相用測試圖形卡.第21部分:確定印刷文件、文獻和報紙縮微攝影條件的曝光試樣 | Test patterns for micrography; test exposures made to establish the conditions for microfilming of printed documents, literature and newspapers |
| DIN 19059-2 Bb.1-1985 | 縮微膠片.縮微攝影用圖形符號.實用范例 | Microfilms; graphical symbols for microfilming; originals for practical application |
| DIN 19059-2-1985 | 縮微膠卷.縮微膠卷用圖形符號.應用和概覽 | Microfilms; graphic symbols for microfilming for use in practice; application and summary |
| DIN 1912-4-1981 | 焊接、軟釬焊和硬釬焊焊口的圖形表示法.軟釬焊和硬釬焊焊口和焊縫的概念和術語 | Graphical Representation of Welded, Soldered and Brazed Joints; Concepts and Terms for Soldered and Brazed Joints and Seams |
| DIN 19227-1-1993 | 控制技術.過程控制圖形符號和標識字母.功能圖形 | Control technology; graphical symbols and identifying letters for process control engineering; symbolic representation for functions |
| DIN 19653-1994 | 灌溉系統.圖形符號、字母符號、標牌、術語 | Irrigation systems - Graphical symbols, letter symbols, signs, terms |
| DIN 19673-2002 | 土壤質量.土壤檢驗結果的圖形表示 | Soil quality - Graphical presentation of pedological examination results |
| DIN 19711-1975 | 水文地質學用圖形和符號 | Graphical and letter symbols for hydrogeology |
| DIN 2137 Bb.1-2003 | 文本和辦公設備.鍵盤.數據和文本加工以及打字機用德文鍵盤.關于圖形字符或符號的信息 | Text and office systems - Keyboards - German keyboard for data and text processing, as well as for typewriters, information on graphic characters or symbols |
| DIN 2137-2-2003 | 文本和辦公設備.鍵盤.第2部分:數據和文本處理用德文鍵盤.鍵的排列和鍵的圖形字符的定位 | Text and office systems - Keyboards - Part 2: German keyboard for data and text processing; Key arrangement and allocation of graphic characters to keys |
| DIN 21555-1991 | 礦井支承.動力支承的開環控制裝置的圖形符號 | Mine support; graphical symbols for the open loop control of powered support |
| DIN 21907-2003 | 礦山設計圖.布置圖圖形設計 | Mine plans - Graphic design of sheets |
| DIN 2258-1986 | 尺寸計量的圖形符號 | Graphical symbols for dimensional metrology |
| DIN 23011-3-1992 | 選煤.選煤設備.工藝流程圖形符號 | Preparation of hard coal; preparation-plants; graphical symbols for flowsheets |
| DIN 24271-2-1982 | 集中潤滑系統.第2部分:技術圖紙的圖形符號 | Centralized lubrication systems; Graphic symbols for technical drawings |
| DIN 24536-1985 | 煉鋼廠和軋鋼機用設備.在技術圖紙上帶錨盒的地腳螺栓和T 型頭螺栓的圖形符號 | Equipment for steelworks and rolling mills; graphical symbols for stone bolts and tee head bolts with anchor boxes in technical drawings |
| DIN 2481-1979 | 熱電站.圖形符號 | Thermal Power Plants; Graphical Symbols |
| DIN 24900-10-1987 | 工程學和相關領域用圖形符號.機床 | Graphical symbols for use in the engineering and related fields; machine tools |
| DIN 24900-110-1987 | 工程和相關領域用圖形符號.機床.多軸自動車床用檢查和分配示例 | Graphical symbols for use in the engineering and related fileds; machine tools; review and assignment examples for multi-spindle automatic lathe |
| DIN 24900-20-2003 | 工程及相關領域圖形符號.第20部分:塑料和橡膠機械 | Graphical symbols for use in the engineering and related fields - Part 20: Plastics and rubber machinery |
| DIN 24900-23-1991 | 工程和相關領域用圖形符號.第23部分:壓鑄機 | Graphical symbols for use in the engineering and related fields; die casting machines |
| DIN 24901-3-1983 | 工程和相關領域用技術制圖的圖形符號.破碎機.工藝流程圖的表示 | Graphical symbols for technical drawings for use in the engineering and related fields; comminution machines; presentation in flow diagrams |
| DIN 24901-4-1983 | 工程和相關領域使用的技術制圖用圖形符號.壓縮機和鼓風機.流程圖表式法 | Graphical symbols for technical drawings for use in the engineering and related fields; comporessors, fans; presentation in flow diagrams |
| DIN 24902-11-1982 | 公共信息用圖形符號.升降機 | Graphical symbols for public information; lifts |
| DIN 24902-20-1981 | 信息用圖形符號.塑料機械 | Graphical symbols for information; plastic machinery |
| DIN 25411-1991 | 核反應堆.圖形符號和縮寫形式 | Nuclear reactors; graphical symbols and short forms |
| DIN 25419-1985 | 事件樹分析.方法、圖形符號和評定 | Event tree analysis; method, graphical symbols and evaluation |
| DIN 25424-1-1981 | 失效樹分析.方法和圖形符號 | Fault tree analysis; Method and graphical symbols |
| DIN 28190-1981 | 帶焊接浮動頭的熱交換器.通路數 2，管 25，方形管心距32.管、系定桿和滑軌的數量和排列圖形 | Floating head heat exchanger with welded floating head; number of passes: 2, tubes 25, square tube pitch 32; number and pattern of tubes, tie rods and slide rails |
| DIN 28191-1981 | 帶法蘭盤浮動頭的熱交換器.通路數2、4和8，管25，方形管心距32.管.系定桿和滑軌的數量和排列圖形 | Floating head heat exchanger with flanged floating head; number of passes: 2,4 and 8, tubes 25, square tube pitch 32; number and pattern of tubes, tie rods and slide rails |
| DIN 28401-1976 | 真空技術.圖形符號.綜述 | Vacuum technology; graphical symbols, summary |
| DIN 30728-3-1981 | 公共事業用圖形符號.街道清掃汽車、清雪車輛 | Graphical symbols for communal purposes; vehicles for street cleaning, vehicles for snow removal |
| DIN 30728-4-1983 | 公共事業用圖形符號.井和下水道清潔用汽車 | Graphical symbols for communal purposes; vehicles for cleaning of pits and sewers |
| DIN 30728-5-1995 | 社區用圖形符號.第5部分:支架式器具 | Graphical symbols for communal purposes - Part 5: Mounted implements with boom |
| DIN 32520-1-1987 | 焊接圖形符號.基本圖形符號和原理 | Graphical symbols for welding; basic graphical symbols and principles |
| DIN 32520-3-1989 | 焊接用圖形符號.第3部分:電弧焊圖形符號 | Graphical symbols for welding; graphical symbols for use on arc welding equipment |
| DIN 32911-1983 | 索道和雪撬運送乘客的信息用圖形符號和標志 | Graphic symbols and signs for information of the passengers of ropeways and ski-lifts |
| DIN 32912-1983 | 滑雪道上滑雪者注意事項的圖形符號和標志 | Graphic symbols and signs for information of the skiers on skiing slopes |
| DIN 32913-1993 | 越野滑雪道.滑雪者需用信息的分類、基本圖形符號和標志牌 | Cross country tracks; classification, basic graphic symbols and signs for the information of cross country skiers |
| DIN 33450-2004 | 帶光電子設備監督的信息用圖形符號(可視信息信號) | Graphical symbol for information about surveillance with optical-electronic devices (video-info signs) |
| DIN 40101-2-1993 | 設備用的圖形符號.ISO 7000電器工程圖形符號 | Graphical symbols for use on equipment; graphical symbols from ISO 7000 for electrical engineering |
| DIN 43455-1990 | 52KV以下高壓開關裝置操作圖形符號 | Graphical symbols for operation of high-voltage switchgear less than 52 kV |
| DIN 43609-1978 | 開關設備.壓縮氣體線路圖的圖形符號 | Switchgear-plants; symbols for pressure-gas diagrams |
| DIN 43902-1978 | ３６ＫＶ以下可抽出的開關裝置組件的操作.術語.圖形符號 | Operations of withdrawable switchgear-assemblies up to 36 kV; terms, graphical symbols |
| DIN 4844-1-2005 | 圖形符號.安全顏色和安全符號.第1部分:工作場所和公共場合的安全符號設計原則 | Graphical symbols - Safety colours and safety signs - Part 1: Design principles for safety signs in workplaces and public areas (ISO 3864-1:2002 modified) |
| DIN 5591-1997 | 軌道車輛.技術圖樣圖形符號.壓縮空氣簡圖 | Railway vehicle - Graphical symbols for technical drawings - Compressed-air diagrams |
| DIN 6120-1-1996 | 可回收使用的包裝盒和包裝材料標志.塑料包裝盒和包裝材料.第1部分:圖形符號 | Marking of packaging and packaging materials for recycling purposes - Plastics packaging and packaging materials - Part 1: Graphical symbols |
| DIN 63201-10-1987 | 紡織機械的圖形符號.對DIN63201的補充 | Graphical symbols for textile machines; supplement to DIN 63201 |
| DIN 63201-11-1995 | 紡織機械圖形符號.第11部分:DIN63201補充件 | Graphical symbols for textile machines - Part 11: Supplement to DIN 63201 |
| DIN 63201-12-1997 | 紡織機械圖形符號.第12部分:DIN63201補充件 | Graphical symbols for textile machinery - Part 12: Supplement to DIN 63201 |
| DIN 63201-1982 | 紡織機械的圖形符號 | Graphical symbols for textile machines |
| DIN 66001 Bb.1-1983 | 信息處理.圖形符號及其用途.模板上圖形符號的排列 | Information processing; graphical symbols and their application; layout of graphical symbols on a template |
| DIN 66001-1983 | 信息處理.圖形符號及其用途 | Information processing; graphical symbols and their application |
| DIN 66079-2-1998 | 公共信息圖形符號.第2部分:圖形符號的發展和應用原則 | Graphical symbols for public information - Part 2: Development of graphical symbols and principles for their application |
| DIN 66079-4-1998 | 公共信息圖形符號.第4部分:殘疾人用圖形符號 | Graphical symbols for public information - Part 4: Graphical symbols for disabled persons |
| DIN 66079-5-1998 | 公共信息圖形符號.第5部分:交通指示標志 | Graphical symbols for public information - Part 5: Traffic orientation signs |
| DIN 66143-1974 | 粒度分布圖形表示法.冪函數網格 | Graphical representation of particle size distributions; power-function grid |
| DIN 66144-1974 | 粒度分布圖形表示法.對數正態網格 | Graphical representation of particle size distributions; log-normal grid |
| DIN 66145-1976 | 粒度分布圖形表示法.RRSB網格 | Graphical representation of particle size distributions; RRSB-grid |
| DIN 6654-1996 | 風動管道系統.圖形符號 | Pneumatic tube conveyor systems - Graphic symbols |
| DIN 70005-1-1982 | 機動車輛.自記式轉速計用圖形符號 | Power-driven vehicles; graphic symbols for tachographs |
| DIN 7167-1987 | 尺寸,形狀和平行度公差之間的關系.圖紙上無單獨說明的圖形包絡線要求 | Relationship between tolerances of size, form, and parallelism; envelope requirement without individual indication on the drawing |
| DIN 74253-1994 | 汽車和掛車的制動裝置.制動管路圖的圖形符號 | Braking equipment for motor vehicles and trailers; graphic symbols for piping diagrams |
| DIN 74255-2005 | 拖掛車.操縱桿圖形符號 | Towed Vehicles - Graphical symbols for levers |
| DIN 80002-2-1998 | 船舶和海上技術.船舶的總布局圖.第2部分:圖形符號 | Ships and marine technology - General arrangement plans for ships - Part 2: Graphical symbols (ISO 1964:1987, modified) |
| DIN 81209-1-1999 | 船舶的幾何圖形和穩定性.符號、術語、定義.第1部分:總則,水面單體船 | Geometry and stability of ships - Symbols, terms, definitions - Part 1: General, monohull surface ships |
| DIN 81209-2-1999 | 船舶的幾何圖形和穩定性.符號、術語和定義.第2部分:潛水艇 | Geometry and stability of ships - Symbols, terms, definitions - Part 2: Submarines |
| DIN 81209-6-2003 | 船舶幾何圖形和穩定性.符號、術語和定義.第6部分:航行船舶 | Geometry and stability of ships - Symbols, terms, definitions - Part 6: Sailing ships |
| DIN 8125-1-2000 | 稱重用圖形符號.第1部分:測量的基本原理 | Graphical symbols for weighing - Part 1: Fundamental principles, survey |
| DIN 85005 Bb.1-2005 | 船舶和海上技術.技術文獻的圖形符號.索引 | Ships and marine technology - Graphical symbols for technical documentation - Index |
| DIN 85005-1-1998 | 船舶和航行技術.技術文獻圖形符號.第1部分:總則 | Ships and marine technology - Graphical symbols for technical documentation - Part 1: General instructions |
| DIN 85005-10-2001 | 船舶和船舶技術.技術文獻圖形符號.第10部分:傳感器和操作指示器 | Ships and marine technology - Graphical symbols for technical documentation - Part 10: Sensors and operating indicators |
| DIN 85005-11-1999 | 船舶和航海技術.技術文獻的圖形符號.第11部分:渦輪 | Ships and marine technology - Graphical symbols for technical documentation - Part 11: Turbines |
| DIN 85005-12-1998 | 船舶和海上技術.技術文獻的圖形符號.第12部分:壓縮機 | Ships and marine technology - Graphical symbols for technical documentation - Part 12: Compressors |
| DIN 85005-14-1998 | 船舶和海上技術.技術文獻的圖形符號.第14部分:泵、過濾器、分離器和干燥器 | Ships and marine technology - Graphical symbols for technical documentation - Part 14: Pumps, filters, separators, dryers |
| DIN 85005-15-1998 | 船舶和海上技術.技術文獻的圖形符號.第15部分:排水道 | Ships and marine technology - Graphical symbols for technical documentation - Part 15: Drains |
| DIN 85005-16-2002 | 船舶和航海技術.技術文件管理的圖形符號.第16部分:通風設備 | Ships and marine technology - Graphical symbols for technical documentation - Part 16: Ventilation plants |
| DIN 85005-17-2001 | 船舶和船舶技術.技術文獻圖形符號.第17部分:門、鉸鏈、操作室、窗、樓梯和電梯 | Ships and marine technology - Graphical symbols for technical documentation - Part 17: Doors, hatches, openings, windows, stairs, elevators |
| DIN 85005-18-2002 | 船舶和航海技術.技術文件的圖形符號.第18部分:衛生設備 | Ships and marine technology - Graphical symbols for technical documentation - Part 18: Sanitary installations |
| DIN 85005-2-1999 | 船舶和海上技術.技術文獻的圖形符號.第2部分:管和軟管組件.管和軟管連接.套管 | Ships and marine technology - Graphical symbols for technical documentation - Part 2: Piping and hose assemblies, pipe and hose-joints, penetrations |
| DIN 85005-23-2004 | 船舶和海上技術.技術文獻的圖形符號.第23部分:絕緣 | Ships and marine technology - Graphical symbols for technical documentation - Part 23: Isolations |
| DIN 85005-24-2004 | 船舶和海上技術.技術文獻的圖形符號.第24部分:抗振和隔音用組件 | Ships and marine technology - Graphical symbols for technical documentation - Part 24: Components for measures against vibration and sound |
| DIN 85005-27-2004 | 船舶和海上技術.技術文獻的圖形符號.第27部分:機械遙控 | Ships and marine technology - Graphical symbols for technical documentation - Part 27: Mechanical remote controls |
| DIN 85005-3-1998 | 船舶和海上技術.技術文獻的圖形符號.第3部分:關閉、控制和調節零部件 | Ships and marine technology - Graphical symbols for technical documentation - Part 3: Shut-off, control and regulating parts |
| DIN 85005-30-1998 | 船舶和航行技術.技術文獻圖形符號.第30部分:發電、配電 | Ships and marine technology - Graphical symbols for technical documentation - Part 30: Electrical energy production, energy distribution |
| DIN 85005-31-1998 | 船舶和航行技術.技術文獻圖形符號.第31部分:電氣安裝 | Ships and marine technology - Graphical symbols for technical documentation - Part 31: Electrical installation |
| DIN 85005-32-1998 | 船舶和海上技術.技術文獻的圖形符號.第32部分:呼叫系統和報警系統 | Ships and marine technology - Graphical symbols for technical documentation - Part 32: Call systems and alarm systems |
| DIN 85005-33-1998 | 造船和海上技術.技術文獻的圖形符號.第33部分:經濟設備 | Ships and marine technology - Graphical symbols for technical documentation - Part 33: Economic equipment |
| DIN 85005-34-1999 | 造船和海上技術.技術文獻圖形符號.第34部分:船舶動力設備的控制指示器 | Ships and marine technology - Graphical symbols for technical documentation - Part 34: Control indicators for ships propulsion plants |
| DIN 85005-35-1999 | 船舶和海上技術.技術文獻的圖形符號.第35部分:導航設備 | Ships and marine technology - Graphical symbols for technical documentation - Part 35: Navigational equipment |
| DIN 85005-36-1999 | 船舶和海上技術.技術文獻的圖形符號.第36部分:無線電設備,電傳打印機和通訊系統 | Ships and marine technology - Graphical symbols for technical documentation - Part 36: Radio equipment, teleprinter and communication systems |
| DIN 85005-37-2000 | 船舶和海上技術.技術文件的圖形符號.第37部分:照明配件 | Ships and marine technology - Graphical symbols for technical documentation - Part 37: Lighting fittings |
| DIN 85005-38-1999 | 船舶和航海技術.技術文獻的圖形符號.第38部分:特種設備上電器裝置用儀器 | Ships and marine technology - Graphical symbols for technical documentation - Part 38: Devices of electrical installations in special systems |
| DIN 85005-4-1999 | 船舶和航海技術.技術文獻的圖形符號.第4部分:測深管.充氣管和加注管 | Ships and marine technology - Graphical symbols for technical documentation - Part 4: Sounding pipes, air-pipes and filling pipes |
| DIN 85005-5-1998 | 船舶和海上技術.技術文獻的圖形符號.第5部分:蒸氣發生器、熱交換器和容器 | Ships and marine technology - Graphical symbols for technical documentation - Part 5: Steam generator, heat exchanger, container |
| DIN 85005-6-1998 | 船舶和海上技術.技術文獻的圖形符號.第6部分:淡水蒸餾裝置 | Ships and marine technology - Graphical symbols for technical documentation - Part 6: Freshwater distilling unit |
| DIN 85005-7-1999 | 船舶和航海技術.技術文獻的圖形符號.第7部分:壓力液體艙 | Ships and marine technology - Graphical symbols for technical documentation - Part 7: Pressure tanks |
| DIN 85005-8-2001 | 船舶和船舶技術.技術文獻圖形符號.第8部分:動力傳輸設施和控制開關組件 | Ships and marine technology - Graphical symbols for technical documentation - Part 8: Power transmission plant and steering gear components |
| DIN 85005-9-1999 | 船舶和航海技術.技術文獻的圖形符號.第9部分:吸入和排放管的管座 | Ships and marine technology - Graphical symbols for technical documentation - Part 9: Suction- and discharge sockets |
| DIN EN 12792-2004 | 建筑物通風.符號、術語和圖形符號 | Ventilation for buildings - Symbols, terminology and graphical symbols; German version EN 12792:2003 |
| DIN EN 14916-2006 | 家用炊具.圖形符號(象形圖) | Domestic cookware - Graphical symbols (pictograms); German version EN 14916:2005 |
| DIN EN 2656-2002 | 航空航天系列.管道連接件.焊接連接端頭.幾何圖形; 德文版本 EN 2656:2001 | Aerospace series - Pipe coupling - Coupling end, welded; Geometric configuration; German version EN 2656:2001 |
| DIN EN 27286-1991 | 電阻焊接設備的圖形符號(ISO 7286-86) | Graphical symbols for resistance welding equipment (ISO 7286:1986); german version EN 27286:1991 |
| DIN EN 2997-8-1997 | 航空和航天.運行溫度常數為175℃,200℃,溫度極限值為260℃,耐火或不耐火的,帶螺紋連接器的電器圖形插接器. | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non-resistant, operating temperatures 175 °C continuous, 200 °C continuous, 260 °C peak - Part 8: Plug; product standard; German version EN 2997-8:1997 |
| DIN EN 60417-1-2000 | 設備圖形符號.第1部分:總則和應用 | Graphical symbols for use on equipment - Part 1: Overview and application (IEC 60417-1:1998); Trinlingual version EN 60417-1:1998 |
| DIN EN 60417-2-2000 | 設備用圖形符號.第2部分:原形符號 | Graphical symbols for use on equipment - Part 2: Symbol originals (IEC 60417-2:1998); Trilingual version EN 60417-2:1999 |
| DIN EN 60617-10-1997 | 線圖圖形符號.第10部分:電信線路圖.發射設備 | Graphical symbols for diagrams - Part 10: Telecommunications; transmission (IEC 60617-10:1996); German version EN 60617-10:1996 |
| DIN EN 60617-11-1997 | 線圖圖形符號.第11部分:建筑物與地形測量平面圖和線圖 | Graphical symbols for diagrams - Part 11: Architectural and topographical installation plans and diagrams (IEC 60617-11:1996); German version EN 60617-11:1996 |
| DIN EN 60617-12-1999 | 簡圖用圖形符號.第12部分:二進制邏輯元件 | Graphical symbols for diagrams - Part 12: Binary logic elements (IEC 60617-12:1997); German version EN 60617-12:1998 |
| DIN EN 60617-13-1994 | 圖形符號.第13部分:模擬元件 | Graphical symbols for diagrams; part 13: analogue elements (IEC 60617-13:1993); German version EN 60617-13:1993 |
| DIN EN 60617-2-1997 | 線圖圖形符號.第2部分:常用符號要素、標識符和其它符號 | Graphical symbols for diagrams - Part 2: Symbol elements, qualifying symbols and other symbols having general application (IEC 60617-2:1996); German version EN 60617-2:1996 |
| DIN EN 60617-3-1997 | 線圖圖形符號.第3部分:導線和連接器件線路標記 | Graphical symbols for diagrams - Part 3: Conductors and connecting devices (IEC 60617-3:1996); German version EN 60617-3:1996 |
| DIN EN 60617-4-1997 | 線圖圖形符號.第4部分:基本無源元件線路標記 | Graphical symbols for diagrams - Part 4: Basic passive components (IEC 60617-4:1996); German version EN 60617-4:1996 |
| DIN EN 60617-5-1997 | 線圖圖形符號.第5部分:半導體和電子管線路標記 | Graphical symbols for diagrams - Part 5: Semiconductors and electron tubes (IEC 60617-5:1996); German version EN 60617-5:1996 |
| DIN EN 60617-6-1997 | 線圖圖形符號.第6部分:發電和轉換線路標記 | Graphical symbols for diagrams - Part 6: Production and conversion of electrical energy (IEC 60617-6:1996); German version EN 60617-6:1996 |
| DIN EN 60617-7-1997 | 線圖圖形符號.第7部分:開關設備和保護裝置線路標記 | Graphical symbols for diagrams - Part 7: Switchgear, controlgear and protective devices (IEC 60617-7:1996); German version EN 60617-7:1996 |
| DIN EN 60617-8-1997 | 線圖圖形符號.第8部分:測量?jī)x器、燈具和信號裝置線路標記 | Graphical symbols for diagrams - Part 8: Measuring instruments, lamps and signalling devices (IEC 60617-8:1996); German version EN 60617-8:1996 |
| DIN EN 60617-9-1997 | 線圖圖形符號.第9部分:電信線路圖.中繼設備和終端設備 | Graphical symbols for diagrams - Part 9: Telecommunications; switching and peripheral equipment (IEC 60617-9:1996); German version EN 60617-9:1996 |
| DIN EN 61286-2003 | 信息技術.電工及信息交換用文件的編制用編碼圖形字符集 | Information technology - Coded graphic character set for use in the preparation of documents used in electrotechnology and for information interchange (IEC 61286:2001, modified); German version EN 61286:2002 |
| DIN EN 71-6-1994 | 玩具的安全性.第6部分:年齡告誡標簽用圖形符號 | Safety of toys - Part 6: Graphical symbol for age warning labelling; German version EN 71-6:1994 |
| DIN EN 80416-1-2002 | 設備上使用的圖形符號的基本原則.第1部分:符號原型的創建 (IEC 80416-1:2001); 德文版本 EN 80416-1:2001 | Basic principles for graphical symbols for use on equipment - Part 1: Creation of symbol originals (IEC 80416-1:2001); German version EN 80416-1:2001 |
| DIN EN 80416-2-2002 | 設備上使用圖形符號的基本原則.第2部分:箭頭形狀和符號 (ISO 80416-2:2001); 德文版本 EN 80416-2:2001 | Basic principles for graphical symbols for use on equipment - Part 2: Form and use of arrows (ISO 80416-2:2001); German version EN 80416-2:2001 |
| DIN EN 80416-3-2003 | 設備上圖形符號基本使用原則.第3部分:圖形符號使用指南 | Basic principles for graphical symbols for use on equipment - Part 3: Guidelines for the application of graphical symbols (IEC 80416-3:2002); German version EN 80416-3:2002 |
| DIN EN 81714-2-2007 | 產品技術文件用圖形符號的設計.第2部分:包括參考庫圖形符號和互換要求的計算機敏感形式圖形符號規范(IEC 81 | Design of graphical symbols for use in the technical documentation of products - Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange (IEC 81714-2:2006); German version EN 81714-2:2007 |
| DIN EN 81714-3-2001 | 產品技術文件用圖形符號的設計.第3部分:連接節點、網絡及其編碼的分類 | Design of graphical symbols for use in the technical documentation of products - Part 3: Classification of connect nodes, networks and their encoding (IEC 81714-3:1998); German version EN 81714-3:2001 |
| DIN EN 980-2003 | 醫療設備標識圖形符號 | Graphical symbols for use in the labelling of medical devices; German version EN 980:2003 |
| DIN EN ISO 11192-2006 | 游艇.圖形符號(ISO 11192-2005).德文版本EN ISO 11192-2005 | Small craft - Graphical symbols (ISO 11192:2005); German version EN ISO 11192:2005 |
| DIN EN ISO 12085-1998 | 產品幾何量規范(GPS).表面結構:輪廓法.圖形參數 | Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996); German version EN ISO 12085:1997 |
| DIN EN ISO 15187-2003 | 操縱工業機器人.程序設計和機器人操縱的圖形用戶接口 | Manipulating industrial robots - Graphical user interfaces for programming and operation of robots (GUI-R) (ISO 15187:2000); German version EN ISO 15187:2002 |
| DIN EN ISO 7287-2003 | 熱切割設備圖形符號 | Graphical symbols for thermal cutting equipment (ISO 7287:2002); German version EN ISO 7287:2002 |
| DIN EN ISO 780-1999 | 包裝.貨物搬運用圖形標志 | Packaging - Pictorial marking for the handling of goods (ISO 780:1997); German version EN ISO 780:1999 |
| DIN EN ISO 81714-1-2000 | 用于產品技術文件用圖形符號的設計.第1部分:基本規則 | Design of graphical symbols for use in the technical documentation of products - Part 1: Basic rules (ISO 81714-1:1999); German version EN ISO 81714-1:1999 |
| DIN EN ISO 9687-1995 | 牙科設備.圖形符號 (ISO 9687:1993); 德文版本 EN ISO 9687:1995 | Dental equipment - Graphical symbols (ISO 9687:1993); German version EN ISO 9687:1995 |
| DIN EN ISO/IEC 7942-1-1996 | 信息技術.計算機繪圖和圖形加工.圖解核心系統(GKS).第1部分:功能1 | Information technology, computer graphics and image processing - Graphical Kernel System (GKS) - Part 1: Functional description (ISO/IEC 7942-1:1994); English version EN ISO/IEC 7942-1:1995 |
| DIN ETS 300073-1992 | Videotex 顯示層數據語法.幾何圖形顯示 | Videotex presentation layer data syntax; geometric display (CEPT-recommendation T/TE 06-02, Edinburgh 1988); english version ETS 300073:1990 |
| DIN ISO 10110 Bb.1-2000 | 光學及光學儀器.光學元件和系統的圖形制備.DIN ISO 10110與DIN 3140的對照.索引 | Optics and optical instruments - Preparation of drawings for optical elements and systems - Comparison DIN ISO 10110 - DIN 3140; index |
| DIN ISO 10110-10-2004 | 光學和光子學.光學元件和系統圖形制備.第10部分:光學元件和粘結組件的數據表 | Optics and photonics - Preparation of drawings for optical elements and systems - Part 10: Table representing data of optical elements and cemented assemblies (ISO 10110-10:2004) |
| DIN ISO 10110-12-2000 | 光學和光學儀器.光學元件和系統的圖形制備.第12部分:非球面表面 | Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 12: Aspheric surfaces (ISO 10110-12:1997) |
| DIN ISO 10110-14-2004 | 光學及光學儀器.光學元件和系統的圖形制備.第14部分:波陣面變形公差 | Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 14: Wavefront deformation tolerance (ISO 10110-14:2003) |
| DIN ISO 10110-2-2000 | 光學和光學儀器.光學元件和系統的圖形制備.第2部分:材料缺陷.應力雙折射 | Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 2: Material imperfections; stress birefringence (ISO 10110-2:1996) |
| DIN ISO 10110-3-2000 | 光學和光學儀器.光學元件和系統的圖形制備.第3部分:材料缺陷.氣泡和雜質 | Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 3: Material imperfections; bubbles and inclusions (ISO 10110-3:1996) |
| DIN ISO 10110-4-2000 | 光學和光學儀器.光學元件和系統的圖形制備.第4部分:材料缺陷.不均勻性和劃痕 | Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 4: Material imperfections; inhomogenity and striae (ISO 10110-4:1997) |
| DIN ISO 10110-5-2000 | 光學和光學儀器.光學元件和系統的圖形制備.第5部分:表面形狀公差 | Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances (ISO 10110-5:1996 + Technical Corrigendum 1:1996) |
| DIN ISO 10110-6-2000 | 光學和光學儀器.光學元件和系統圖形的制備.第6部分:中心公差 | Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 6: Centring tolerances (ISO 10110-6:1996) |
| DIN ISO 10110-7-2000 | 光學和光學儀器.光學元件和系統的圖形制備.第7部分:表面缺陷公差 | Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 7: Surface imperfection tolerances (ISO 10110-7:1996) |
| DIN ISO 10110-8-2000 | 光學和光學儀器.光學元件和系統的圖形制備.第7部分:表面結構 | Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 8: Surface texture (ISO 10110-8:1997) |
| DIN ISO 10110-9-2000 | 光學和光學儀器.光學元件和系統的圖形制備.第9部分:表面處理和覆層 | Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 9: Surface treatment and coating (ISO 10110-9:1996) |
| DIN ISO 1219-2-1996 | 液壓動力系統和部件.圖形符號和線路圖.第2部分:線路圖 | Fluid power systems and components - Graphic symbols and circuit diagrams - Part 2: Circuit diagrams (ISO 1219-2:1995) |
| DIN ISO 128-1-2003 | 技術圖紙.圖形畫法的一般原則.第1部分:前言和索引 | Technical drawings - General principles of presentation - Part 1: Introduction and index (ISO 128-1:2003) |
| DIN ISO 3864-3-2007 | 圖形符號.安全色和安全標志.第3部分:用于安全標簽的圖形符號的設計原理 | Graphical symbols - Safety colours and safety signs - Part 3: Design principles for graphical symbols for use in safety signs (ISO 3864-3:2006) English version of DIN ISO 3864-3:2007-02 |
| DIN ISO 3952-1/A1-2003 | 運動圖.圖形符號.修改件 A1 | Kinematic diagrams - Graphical symbols; Amendment 1 (ISO 3952-1:1981/DAM 1:2002) |
| DIN ISO 5459-1982 | 技術制圖.幾何公差.幾何圖形公差的基準和基準系統 | Technical drawings; geometrical tolerancing; datums and datum-systems for geometrical tolerances |
| DIN ISO 6133-2004 | 橡膠和塑料.測定撕裂強度和粘合強度所獲得的多峰圖形的分析 | Rubber and plastics - Analysis of multipeak traces obtained in determination of tear strength and adhesion strength (ISO 6133:1998) |
| DIN ISO 8758-1997 | 電影技術.16mm和35mm電影膠片和拷貝上的影相圖形控制記錄和數據記錄.尺寸和定位 | Cinematography - Photographic control and data records on 16 mm and 35 mm motion-picture film and prints - Dimensions and location (ISO 8758:1992) |
| DIN ISO 8805-1991 | 信息處理系統.計算機制圖.三維尺寸圖形核心系統(GKS-3D)的功能說明書; 等同采用 ISO 8805:1988 | Information processing systems; computer graphics; graphical kernel system for three dimensions (GKS-3D) functional description; identical with ISO 8805:1988 |
| DIN ISO 9276-1-2004 | 粒度分析結果的表示.第1部分:圖形表示 | Representation of results of particle size analysis - Part 1: Graphical representation (ISO 9276-1:1998) |
| DIN ISO/IEC 6937-1996 | 信息技術.文本通信編碼圖形字符集.拉丁字母 | Information technology - Coded graphic character set for text communication - Latin alphabet (ISO/IEC 6937:1994) |
| DIN V 40102-1-2000 | 醫用圖形符號.第1部分:技術設備 | Graphical symbols for use on medical - Part 1: Technical equipment |
| 編號 | 中文名稱 | 英文名稱 |