| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI/ASTM B664-1990 | 含80%銀20%石墨的滑動觸點材料規范 | Specification for 80 Silver - 20 Graphite Sliding Contact Material |
| ANSI/ASTM B692-1990 | 含75%銀25%石墨的滑動觸點材料規范 | Specification for 75 Silver - 25 Graphite Sliding Contact Material |
| ANSI/ASTM C1025-2000 | 石墨電極撓度的破裂系數測定方法 | Test Method for Modulus of Rupture in Bending of Electrode Graphite |
| ANSI/ASTM C1039-2000 | 石墨電極容積密度、表觀比重和顯氣孔率的測定方法 | Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes |
| ANSI/ASTM C1179-2000 | 人造碳與石墨材料在空氣中的氧化質量損耗測定方法 | Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air |
| ANSI/ASTM C559-2000 | 碳與石墨人造物測定容積密度物理測量法的試驗方法 | Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles |
| ANSI/ASTM C560-2005 | 石墨化學分析的試驗方法 | Test Methods for Chemical Analysis of Graphite |
| ANSI/ASTM C561-2000 | 石墨樣品中灰份測試方法 | Test Method for Ash in a Graphite Sample |
| ANSI/ASTM C562-2000 | 石墨樣品中濕度試驗方法 | Test Method for Moisture in a Graphite Sample |
| ANSI/ASTM C611-2005 | 室溫下人造碳和石墨制品電阻率的試驗方法 | Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature |
| ANSI/ASTM C625-2000 | 在石墨上進行放射試驗結果報道的實施規程 | Practice for Reporting Irradiation Results on Graphite |
| ANSI/ASTM C651-2000 | 在室內溫度條件下利用四點加載進行碳與石墨人造物撓曲強度試驗方法 | Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature |
| ANSI/ASTM C662-2005 | 抗?jié)B石墨管和螺紋的規范 | Specification for Impervious Graphite Pipe and Threading |
| ANSI/ASTM C695-2000 | 碳與石墨壓強試驗方法 | Test Method for Compressive Strength of Carbon and Graphite |
| ANSI/ASTM C709-2009 | 人造碳及石墨的相關術語 | Terminology Relating to Manufactured Carbon and Graphite |
| ANSI/ASTM C714-2005 | 熱脈動法進行碳和石墨熱擴散的試驗方法 | Test Method for Thermal Diffusivity of Carbon and Graphite by a Thermal Pulse Method |
| ANSI/ASTM C747-2005 | 用聲諧振法測定碳和石墨材料彈性模量和基頻的試驗方法 | Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance |
| ANSI/ASTM C748-2005 | 石墨材料洛氏硬度的試驗方法 | Test Method for Rockwell Hardness of Graphite Materials |
| ANSI/ASTM C749-2008 | 碳和石墨拉伸應力-應變用試驗方法 | Test Method for Tensile Stress-Strain of Carbon and Graphite |
| ANSI/ASTM C769-2009 | 在制造碳和石墨材料獲取近似楊氏彈性模量中聲速的試驗方法 | Test Method For Sonic Velocity In Manufactured Carbon And Graphite Materials For Use In Obtaining An Approximate Young S Modulus |
| ANSI/ASTM C781-2008 | 高溫冷卻氣體核反應堆用石墨和硼化石墨部件測試用實施規程 | Practice for Testing Graphite and Boronated Graphite Components for High-Temperature Gas-Cooled Nuclear Reactors |
| ANSI/ASTM C783-2000 | 石墨電極核心取樣的實施規程 | Practice for Core Sampling of Graphite Electrodes |
| ANSI/ASTM C808-2000 | 人造碳和石墨軸承與密封材料的摩擦力和磨損結果報告指南 | Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials |
| ANSI/ASTM C816-2005 | 用燃燒碘量滴定法測定石墨中硫的試驗方法 | Test Method for Sulfur in Graphite by Combustion-iodometric Titration Method |
| ANSI/ASTM C838-2001 | 人造砷-碳與石墨塑型容積密度測試方法 | Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes |
| ANSI/ASTM D7219-2008 | 同向性和接近同向性核石墨用規范 | Specification for Isotropic and Near-Isotropic Nuclear Graphites |
| ANSI/ASTM D7301-2008 | 適用于受低中子Irr Adiation劑量影響元件的核石墨用規范 | Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irr Adiation Dose |
| ANSI/ASTM D7542-2009 | 空氣中碳和石墨動力學氧化反應標準試驗方法的試驗方法 | Test Method For Standard Test Method For Air Oxidation Of Carbon And Graphite In The Kinetic Regime |
| ANSI/ASTM F2168-2002 | 包裝材料規范.石墨波紋帶或網紋帶和模制環規范 | Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape and Die-Formed Ring |
| ANSI/ASTM F2191-2002 | 石墨或碳編織紗線包裝材料規范 | Specification for Packing Material, Graphitic or Carbon Braided Yarn |
| ASTM A247-2010 | 鐵鑄件中石墨微觀結構的評定標準試驗方法 | Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings |
| ASTM B664-1990(2006) | 含80%銀20%石墨的滑動電接觸材料標準規范 | Standard Specification for 80 % Silver-20 % Graphite Sliding Contact Material |
| ASTM B692-1990(2006) | 含75%銀25%石墨的滑動接觸材料標準規范 | Standard Specification for 75 % Silver-25 % Graphite Sliding Contact Material |
| ASTM C1025-1991(2005) | 石墨電極芯撓曲斷裂模數的試驗方法 | Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite |
| ASTM C1039-1985(2005) | 石墨電極的表觀孔隙率、表觀比重和松密度的試驗方法 | Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes |
| ASTM C1466-2000(2007) | 用石墨原子反應堆吸收光譜法測定陶瓷食品器皿中鉛和鎘的標準試驗方法 | Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted from Ceramic Foodware |
| ASTM C565-1993(2005) | 碳和石墨機械加工材料抗拉檢驗的試驗方法 | Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials |
| ASTM C611-1998(2005)e1 | 室溫下人造碳和石墨制品電阻率的試驗方法 | Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature |
| ASTM C651-1991(2005)e1 | 在室溫下用四點負荷法測定炭加工品及石墨制品撓曲強度的標準試驗方法 | Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature |
| ASTM C748-1998(2005) | 石墨材料洛氏硬度的試驗方法 | Standard Test Method for Rockwell Hardness of Graphite Materials |
| ASTM C808-1975(2005) | 炭加工的及石墨制承重材料和密封材料的磨擦及磨蝕結果的報告標準指南 | Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials |
| ASTM D1971-2002(2006) | 用火焰原子吸收法、石墨爐原子吸收法、等離子體發射光譜法或等離子體質譜法測定金屬含量用水試樣浸煮的標準 | Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry |
| ASTM D4382-2002(2007)e1 | 用石墨爐原子吸收分光光度法對水中鋇的標準試驗方法 | Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace |
| ASTM D6071-2006 | 用石墨反應堆原子吸收光譜法測定高純度水中低水平鈉的標準試驗方法 | Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy |
| ASTM D6357-2004 | 用感應耦合等離子體原子發射光譜法、感應耦合等離子體質譜法和石墨爐原子吸收光譜法測定煤、焦碳和煤利用過 | Test Methods for Determination of Trace Elements in Coal, Coke, & Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, & Graphite Furnace Atomic Absorption Spectrometry |
| ASTM D7542-2009 | 標準測試空氣中的碳和石墨氧化法在動力學制度 | Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime |
| ASTM E1059-1991(2006) | 非石墨反電極的形狀和尺寸的標示 | Standard Practice for Designating Shapes and Sizes of Nongraphite Counter Electrodes |
| ASTM E1184-2002 | 電熱(石墨加熱爐)原子吸收分析的標準實施規程 | Standard Practice for Electrothermal (Graphite Furnace) Atomic Absorption Analysis |
| ASTM E1613-2004 | 用感應耦合等離子體原子發射光譜法(ICP-AES)、火焰原子吸收光譜法(FAAS)或石墨爐原子吸收光譜技術(GFAAS)測 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques |
| 編號 | 中文名稱 | 英文名稱 |