| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF C66-466-1978 | 架空線路用絕緣子和器材.金具.撐桿掛鉤（ＣＲ） | (INSULATORS AND FITTINGS FOR OVERHEAD LINES. METAL FITTINGS. STAY-HOOK (CR).) |
| NF E25-610-1985 | 木螺釘.螺絲鉤 | (WOODSCREWS. SCREW-HOOKS.) |
| NF E25-611-1985 | 木螺釘.直角彎頭螺絲鉤 | (WOODSCREWS. SQUARE BEND SCREW HOOKS.) |
| NF E25-850-1985 | 緊固件.直角彎鉤 | (FASTENERS. SQUARE BEND HOOKS.) |
| NF E26-107-1993 | 葉片鏈,掛鉤和滑輪 | (Leaf chains, clevises and sheaves.) |
| NF E52-030-1987 | 起重配件.碳鋼尖嘴和桿的吊鉤 | (LIFTING APPLIANCES. SHANK HOOK MADE OF CARBON STEEL.) |
| NF E52-031-1987 | 起重配件.合金鋼尖嘴和桿的吊鉤 | (LIFTING APPLIANCES. SHANK HOOK MADE OF ALLOYED STEEL.) |
| NF E52-032-1973 | 最大毛重３０．４８０T集裝箱提升鉤裝置.規范 | (DEVICE WITH HOOKS FOR LIFTING FREIGHT CONTAINERS OF UP TO 30.480 TONNES CAPACITY. REQUIREMENTS.) |
| NF E52-034-1987 | 起重配件.帶尖嘴和眼環的吊鉤.Ｍ級吊鉤 | (LIFTING APPLIANCES. LIFTING HOOKS WITH POINT AND EYE. HOOKS OF GRADE M.) |
| NF E52-037-2-2000 | 吊鏈元件.安全性.第2部分:有栓的鍛壓鋼提鉤.8級 | (Components for slings - Safety - Part 2 : forged steel lifting hooks with latch - Grade 8.) |
| NF E52-037-3-2001 | 吊索用元部件.安全.第3部分:8級鍛鋼制自鎖緊吊鉤 | (Components for slings - Safety - Part 3 : forged steel self-locking hooks - Grade 8.) |
| NF E52-037-5-2001 | 吊索元件.安全性.第5部分:有閂鎖的鍛壓鋼提升鉤,4級 | (Components for slings - Safety - Part 5 : forged steel lifting hooks with latch - Grade 4.) |
| NF E52-142-1986 | 起重配件.L級螺紋豎鉤環 | (Lifting accessories. Screwed bow shackles. Grade L.) |
| NF E52-143-1984 | 起重配件.S級的直鉤環 | (LIFTING APPLIANCES. SCREWED DEE SHACKLES. GRADE S.) |
| NF E52-144-1984 | 起重配件.S級的豎鉤環 | (LIFTING APPLIANCES. SCREWED BOW SHACKLES. GRADE S.) |
| NF E62-183-1983 | 拉削用的四個鎖銷的尾掛鉤頭.第1部分:綜合 | (PULLERS WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 1 : GENERAL.) |
| NF E62-184-1983 | 拉削用的四個鎖銷的前掛鉤頭.第2部分：直徑６到２５的主軸用掛鉤頭尺寸和特征 | (PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 2 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BORACHES OF DIAMETERS 6 TO 25.) |
| NF E62-185-1983 | 拉削用的四個鎖銷的尾掛鉤頭.第3部分:直徑２８到３２的主軸用掛鉤頭尺寸和特征 | (PULLERS WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 3 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 28 TO 32.) |
| NF E62-186-1983 | 拉削用的四個鎖銷的尾掛鉤頭.第4部分：直徑３６到４０的主軸用掛鉤頭尺寸和特征 | (PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 4 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 36 TO 40.) |
| NF E62-187-1983 | 拉削用的四個鎖銷的尾掛鉤頭.第5部分：直徑４５到５０的主軸用掛鉤頭尺寸和特征 | (PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 5 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 45 TO 50.) |
| NF E62-188-1983 | 拉削用的四個鎖銷的尾掛鉤頭.第6部分：直徑５６到６３的主軸用掛鉤頭尺寸和特征 | (PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 6 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 56 TO 63.) |
| NF E62-189-1983 | 拉削用的四個鎖銷的尾掛鉤頭.第7部分：直徑７０到８０的主軸用掛鉤頭尺寸和特征 | (PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 7 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 70 TO 80.) |
| NF E66-611-1983 | 內面拉削刀具.前掛鉤.形狀和尺寸 | (Internal broaching tools. Pull ends.) |
| NF E66-612-1983 | 內面拉削刀具.后掛鉤.形狀和尺寸 | (Internal broaching tools. Tail ends.) |
| NF E74-323-1972 | 螺釘螺帽緊固工具.開槽螺帽用單鉤扳手 | (ASSEMBLY TOOLS FOR SCREWS AND NUTS.HOOK WRENCHES) |
| NF F10-402-1984 | 鐵路車輛. 1MN牽引鉤 | (Railway transport equipment. Coupling hooks of 1 mn.) |
| NF F10-405-1988 | 鐵路車輛.０. ２５ＭＮ牽引鉤 | (Rolling stock. 0,25 mn coupling hook.) |
| NF F10-408-1988 | 鐵路車輛. ０. ６０ＭＮ牽引鉤 | (Rolling stock. 0,60 mn coupling hook.) |
| NF F10-410-1988 | 鐵路車輛.1.5MN的牽引鉤 | (ROLLING STOCK. 1,5 MN COUPLING HOOK.) |
| NF F10-420-1991 | 鐵路車輛.牽引車輛和拖車用車鉤、牽引裝置及驅動齒輪裝置 | (Railway rolling stock. Coupling, traction and driving gears for tractive and hauled stock.) |
| NF F31-014-1977 | 鐵路車輛.公告牌用懸掛鉤 | (RAILWAY TRANSPORT EQUIPMENT.SIGN SUSPENSION HOOK.) |
| NF F56-157-1978 | 鐵路固定設備.通訊和信號裝置架空線路用器材.軟拉線用鉤 | (FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD TELECOMMUNICATION AND SIGNALLING LINES. HOOK FOR STAY-WIRE.) |
| NF G42-510-1977 | 紡織工業設備.導紗器.眼、軸、管和導紗鉤.推薦尺寸 | (THREAD GUIDES. EYELETS,RODS,TUBES AND PIG TAIL GUIDES. RECOMMANDED VALUES.) |
| NF H50-010-2-2000 | 貨架接頭試驗方法.第2部分:貨架釘子和鉤環頭拉伸抗性和回縮特性的測定 | (Methods of test for pallet joints - Part 2 : determination of withdrawal and head pull-through resistance of pallet nails and staples.) |
| NF H96-403-1996 | 叉式起重車.鉤接式叉臂.詞匯 | (Fork-lift trucks. Hook-on type fork arms. Vocabulary.) |
| NF H96-406-1996 | 叉車.鉤接式叉臂和叉臂托架.安裝尺寸 | (Fork-lift trucks. Hook-on type fork arms and fork arm carriages. Mounting dimensions.) |
| NF J33-320-1971 | 造船工業.游艇.鉤環.尺寸 | (SHIPBUILDING. YACHTING. SHACKLES. DIMENSIONS.) |
| NF L81-311-1966 | 機上起重支墊和系留環或鉤環的固定 | (MOUNTING ON AIRCRAFT JACKING PADS AND MOORING RINGS OR SHACKLES. (RECH.).) |
| NF S90-520-1973 | 外科醫療器械.矯形和假肢組件.帶連接掛鉤的可拆卸踝骨的連接 | (MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. DETACHABLE ANKLE JOINT WITH ASSEMBLY HOOK.) |
| NF S90-521-1973 | 外科醫療器械.矯形和假肢組件.連接鉤 | (MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. ASSEMBLY HOOK.) |
| NF U14-023-1983 | 農用車輛.拖車的機械連接裝置.第2部分:U型掛鉤型號.尺寸 | (AGRICULTURAL VEHICLES. MECHANICAL CONNECTIONS ON TOWING VEHICLES. PART 2 : CLEVIS TYPE. DIMENSIONS.) |
| NF U14-027-2002 | 農用車輛.牽引車上機械吊鉤式連接件.試驗方法和要求 | (Agricultural vehicles - Mechanical hook-type connections on towing vehicles - Test methods and requirements.) |
| NF U14-028-2002 | 農用車輛.拖掛車和牽引車輛之間的機械連接.第2部分:40 U型鉤規范 | (Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 2 : specifications for clevis coupling 40.) |
| NF X51-001-1977 | 電纜、鏈和鉤的合格證書和標志 | (CERTIFICATION AND MARKING OF CABLES,CHAINS AND HOOKS. (ANNEXE TO THE DIRECTIVE OF 13TH APRIL 1976 OF THE COMMISSION OF THE EUROPEAN COMMUNITIES).) |
| 編號 | 中文名稱 | 英文名稱 |