| 編號 | 中文名稱 | 英文名稱 |
|---|
| ANSI Z21.15-1997
| 煤氣設備、設備連接閥和軟管終端閥的手動煤氣閥(同 CGA 9.1)
| Manually Operated Gas Valves for Appliances, Appliance Connector Valves and Hose End Valves (same as CGA 9.1)
|
| ANSI Z21.15b-2006
| 煤氣設備、設備連接閥和軟管端部閥的手動操作煤氣閥
| Manually Operated Gas Valves for Appliances, Appliance Connector Valves and Hose End Valves (same as CSA 9.1b)
|
| ANSI Z21.54-2002
| 便攜式戶外燃?xì)馄骶哂脷怏w軟管連接器(同 CSA 8.4)
| Gas Hose Connectors for Portable Outdoor Gas-Fired Appliances (same as CSA 8.4)
|
| ANSI Z21.54a Addenda-1992
| 便攜式室外燃?xì)馄骶叩能浌苓B接器.補充件
| Gas hose connectors for portable outdoor gas-fired appliances; Addenda
|
| ANSI/ASAE S553-2001
| 伸縮式排放軟管.規范和性能試驗
| Collapsible Emitting Hose (Drip Tape) - Specifications and Performance Testing
|
| ANSI/ASME B1.20.7-1991
| 英制軟管連接螺紋
| Hose Coupling Screw Threads - Inch
|
| ANSI/ASSE 1011-2004
| 軟管連接真空軋碎機
| Hose Connection Vacuum Breakers
|
| ANSI/ASSE 1052-2004
| 軟管連接防回流裝置的性能要求
| Performance Requirements for Hose Connection Backflow Preventers
|
| ANSI/ASTM E2226-2002
| 軟管流使用規程
| Practice for Application of Hose Stream
|
| ANSI/ASTM F1347-1997
| 手動燃料軟管卷盤規范
| Specification for Manually Operated Fueling Hose Reels
|
| ANSI/ASTM F1546/F 1546M-1996
| 消防軟管?chē)娮斓囊?guī)范
| Specification for Fire Hose Nozzles
|
| ANSI/ASTM F2165-2002
| 預絕緣軟管規范
| Specification for Flexible Pre-insulated Piping
|
| ANSI/ASTM F2290-2003
| 醫療氣體用ISO 5359低壓軟管組件的采用
| Adoption of ISO 5359 Low-pressure Hose Assemblies for Use with Medical Gases
|
| ANSI/ASTM F450-2001
| 真空吸塵器軟管耐熱性及可靠性試驗方法(塑料線增強)
| Methods for Testing Vacuum Cleaner Hose for Durability and Reliability (Plastic Wire Reinforced)
|
| ANSI/ASTM F481-1996
| 化糞池瀝濾場用熱塑塑料管和波紋軟管安裝慣例
| Practice for Installation of Thermoplastic Pipe and Corrugated Tubing in Septic Tank Leach Fields
|
| ANSI/ASTM F585-1994
| 聚乙烯軟管插入現有下水道的慣例
| Practice for Insertion of Flexible Polyethylene Pipe into Existing Sewers
|
| ANSI/ASTM F595-2001
| 真空吸塵器軟管耐用性及可靠性試驗方法(全塑軟管)
| Methods for Testing Vacuum Cleaner Hose for Durability and Reliability (All-Plastic Hose)
|
| ANSI/CLSI H1-A 5-2003
| 靜脈取血樣用軟管和附件;第5版
| Tubes and Additives for Venous Blood Specimen Collection; Approved Standard- Fifth Edition
|
| ANSI/IAS NGV4.2-1999
| 天然氣車輛和分裝系統用軟管
| Hoses for Natural Gas Vehicles and Dispensing Systems
|
| ANSI/NFPA 14-2003
| 供水管、專用消防栓和軟管系統的安裝標準
| Standard for the Installation of Standpipe, Private Hydrants, and Hose Systems
|
| ANSI/NFPA 1961-2006
| 消防軟管
| Fire Hose
|
| ANSI/NFPA 1965-2003
| 軟管設備標準
| Standard for Hose Appliances
|
| ANSI/SAE J1231-1998
| 卷管的軟管接頭
| Beaded Tube Hose Fittings
|
| ANSI/SAE J1401-1993
| 道路車輛.使用非石油基液壓油的液壓制動軟管組件
| Road Vehicle - Hydraulic Brake Hose Assemblies for Use with Non-Petroleum Base Hydraulic Fluids
|
| ANSI/SAE J1406-1993
| 汽車輛液壓制動軟管的應用
| Application of Hydraulic Brake Hose to Motor Vehicles
|
| ANSI/SAE J1508-1993
| 軟管夾規格
| Hose Clamp Specifications
|
| ANSI/SAE J1527-1993
| 船用燃料軟管
| Marine Fuel Hoses
|
| ANSI/SAE J1737-1997
| 通過反復流動測定燃料管、軟管、配件、和燃料組件烴損失的試驗程序
| Test Procedure to Determine the Hydrocarbon Losses from Fuel Tubes, Hoses, Fittings, and Fuel Line Assemblies by Recirculation
|
| ANSI/SAE J188-1998
| 動力轉向壓力軟管.高容積膨脹型
| Power Steering Pressure Hose - High Volumetric Expansion Type
|
| ANSI/SAE J189-1998
| 動力轉向回流軟管.低壓
| Power Steering Return Hose - Low Pressure
|
| ANSI/SAE J190-1998
| 金屬絲編織的動力轉向壓力軟管
| Power Steering Pressure Hose-Wire Braid
|
| ANSI/SAE J191-1998
| 動力轉向壓力軟管.低容積膨脹型
| Power Steering Pressure Hose - Low Volumetric Expansion Type
|
| ANSI/SAE J20-1997
| 制冷系統軟管
| Coolant System Hoses
|
| ANSI/SAE J2045-1998
| 管/軟管組件
| Tube/Hose Assemblies
|
| ANSI/SAE J2050-1993
| 高溫助力轉向壓力軟管
| High-Temperature Power Steering Pressure Hose
|
| ANSI/SAE J2064-1998
| 汽車用R134a制冷空氣調節軟管
| R134a Refrigerant Automotive Air Conditioning Hose
|
| ANSI/SAE J2076-1993
| 高溫動力轉向回程軟管.低壓
| High-Temperature Power Steering Return Hose - Low Pressure
|
| ANSI/SAE J2387-1997
| 制冷系統軟管尺寸和公差
| Dimensions and Tolerances for Coolant System Hoses
|
| ANSI/SAE J30-1998
| 燃料和燃油軟管
| Fuel and Oil Hoses
|
| ANSI/SAE J51-1998
| 汽車空調軟管
| Automotive Air Conditioning Hose
|
| ANSI/SAE J516-1997
| 液壓軟管配件
| Hydraulic Hose Fittings
|
| ANSI/SAE J517-1998
| 液壓軟管
| Hydraulic Hose
|
| ANSI/SAE J518-1993
| 四螺栓拼合法蘭型液壓法蘭管、管道及軟管接頭
| Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flange Type
|
| ANSI/UL 1660-2004
| 不透液體的非金屬軟管的安全標準
| Standard for Safety for Liquid-Tight Flexible Nonmetallic Conduit
|
| ANSI/UL 330-1999
| 配送易燃性液體用軟管和軟管組件的安全性標準
| Standard for Safety for Hose and Hose Assemblies for Dispensing Flammable Liquids
|
| ANSI/UL 401-2004
| 防火服務用便攜式噴霧軟管?chē)娮斓陌踩珮?biāo)準
| Standard for Safety for Portable Spray Hose Nozzles for Fire-Protection Service (bulletin dated February 16, 2004)
|
| ANSI/UL 536-2000
| 柔性金屬軟管
| Flexible Metallic Hose
|
| ANSI/UL 92-1999
| 滅火器和增壓器軟管
| Fire Extinguisher and Booster Hose
|
| ASME B1.20.7-1991
| 軟管聯結螺紋(英制)
| (Hose coupling screw threads (inch))
|
| ASTM ANS/ISO 5359-2000
| 與美國國家標準有偏差的ASTM國際標準認可的與醫療氣體一起使用的低壓軟管組件
| Low-Pressure Hose Assemblies for Use with Medical Gases Approved as an American National Standard with Deviations by ASTM International
|
| ASTM D 1050-2005
| 橡膠絕緣軟管的標準規范
| Standard Specification for Rubber Insulating Line Hose
|
| ASTM D 3572-1986
| 家用洗衣機和洗碗機用排水軟管
| Consumer Product Household Laundry and Dishwasher Drain Hose
|
| ASTM D 3573-1986
| 家用水槽噴灑軟管
| Consumer Product Sink Spray Hose
|
| ASTM D 380-1994
| 橡膠軟管的標準試驗方法
| Standard Test Methods for Rubber Hose
|
| ASTM D 3901-1990
| 民用園林軟管
| Consumer Product Garden Hose
|
| ASTM D 3902-1990
| 液化石油氣氣體擴散用橡膠軟管的試驗方法
| Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas
|
| ASTM D 3952-1987
| 太陽能系統用橡膠軟管
| Rubber Hose Used in Solar Energy Systems
|
| ASTM D 4237-1990
| 蒸汽設備用橡膠軟管的試驗方法
| Test Methods for Rubber Hose Used for Steam Applications
|
| ASTM D 4264-1990
| 室內儲水管用橡膠襯里的消防軟管和橡膠增強軟管的組合件的壓力試驗方法
| Test Method for Pressure Testing of Assemblies of Rubber-Lined Fire Hose and Rubber Booster Hose in Service on Interior Standpipes
|
| ASTM D 622-1999
| 汽車空氣制動和真空制動用橡膠軟管的試驗方法
| Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System
|
| ASTM E 2226-2002
| 軟管流使用規程
| Standard Practice for Application of Hose Stream
|
| ASTM F 1347-1991
| 手工操作的加燃料軟管卷盤標準規范
| Standard Specification for Manually Operated Fueling Hose Reels
|
| ASTM F 2072-2001
| 薄膜開關軟管洗滌的標準實施規程
| Standard Practice for Hosedown of a Membrane Switch
|
| ASTM F 450-2001
| 真空吸塵器軟管的耐熱性及可靠性的標準試驗方法
| Standard Test Methods for Vacuum Cleaner Hose - Durability and Reliability (Plastic Wire Reinforced)
|
| ASTM F 478-1992
| 絕緣線路軟管及覆蓋物的使用保養
| In-Service Care of Insulating Line Hose and Covers
|
| ASTM F 481-1997
| 化糞池瀝濾場用熱塑性管道和波紋軟管的安裝標準實施規范
| Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
|
| ASTM F 585-1994
| 聚乙烯軟管同現有污水管插接
| Standard Practice for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
|
| ASTM F 595-2001
| 真空吸塵器軟管的耐用性及可靠性試驗(全塑軟管)的標準試驗方法
| Standard Test Methods for Vacuum Cleaner Hose - Durability and Reliability (All-Plastic Hose)
|
| UL 181B-1995
| 用于空氣軟管和空氣連接器的密封系統
| (Closure systems for use with flexible air ducts and air connectors )
|
| UL 19-2001
| 帶襯的消防軟管和軟管組件
| (Lined fire hose and hose assemblies )
|
| UL 21-1995
| 液化石油氣軟管
| (LP-gas hose )
|
| UL 219-1993
| 室內豎管用襯里軟管
| (Lined fire hose for interior standpipes )
|
| UL 330-1996
| 用于配送可燃液體的軟管和軟管組件
| (Hose and hose assemblies for dispensing flammable liquids )
|
| UL 401-1993
| 防火用移動噴水軟管?chē)婎^
| (Portable spray hose nozzles for fire protection service )
|
| UL 47-1993
| 半自動消防軟管存儲裝置
| (Semiautomatic fire hose storage devices )
|
| UL 536-1997
| 撓性金屬軟管
| (Flexible metallic hose )
|
| UL 569-1995
| 液化石油氣用引線和撓性軟管連接器
| (Pigtails and flexible hose connectors for LP-gas )
|
| UL 668-1995
| 消防用軟管閥門
| (Hose valves for fire-protection service )
|
| UL 92-1993
| 滅火器和助推器用軟管
| (Fire extinguisher and booster hose )
|
| 編號 | 中文名稱 | 英文名稱 |
|---|