| 編號 | 中文名稱 | 英文名稱 |
|---|
| IEC 60034-22-1996
| 旋轉電機 第22部分:往復式內燃機驅動的發電機組用交流發電機
| Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets
|
| IEC 88528-11-2004
| 往復式內燃機驅動交流發電機組.第11部分:旋轉的不間斷電力系統.性能要求和試驗方法
| Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods
|
| ISO 11055-1996
| 往復式內燃機的飛輪 離合器的安裝尺寸
| Flywheels for reciprocating internal combustion engines - Installation dimensions for clutches
|
| ISO 11102-1-1997
| 往復式內燃機 手柄起動裝置 第1部分:安全要求和試驗
| Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests
|
| ISO 11102-2-1997
| 往復式內燃機 手柄起動裝置 第2部分:脫開角試驗方法
| Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement
|
| ISO 11424-1996
| 內燃機的空氣和真空系統用橡膠軟管及其管件 規范
| Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification
|
| ISO 11806-1997
| 農林機械 由內燃機驅動的便攜手持式割灌機和割草機 安全
| Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety
|
| ISO 1204-1990
| 往復式內燃機 旋轉方向 氣缸和氣缸蓋上氣門標志及直列式內燃機右機、左機和發動機方位的定義
| Reciprocating internal combustion engines; designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine
|
| ISO 13332-2000
| 往復式內燃機 在發動機底座處測量由高速和中速往復式內燃機產生的結構噪聲的試驗規程
| Reciprocating internal combustion engines - Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet
|
| ISO 13738-2000
| 潤滑劑、工業潤滑油和有關產品(L類) E組(內燃機油) 二沖程汽油機油規格(EGB、EGC、EGD)
| Lubricants, industrial oils and related products (class L) - Family E (Internal combustion engine oils) - Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD)
|
| ISO 13774-1998
| 內燃機燃料用橡膠和塑料軟管 耐燃性試驗方法
| Rubber and plastics hoses for fuels for internal-combustion engines - Method of test for flammability
|
| ISO 14314-2004
| 往復式內燃機.反沖起動設備.一般安全要求
| Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements
|
| ISO 14396-2002
| 往復式內燃機.發動機功率的測量和檢測方法.依據ISO 8178的廢氣排放試驗的補充要求
| Reciprocating internal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178
|
| ISO 15550-2002
| 內燃機.發動機功率的測量和檢測方法.一般要求
| Internal combustion engines - Determination and method for the measurement of engine power - General requirements
|
| ISO 19013-1-2005
| 內燃機燃料回路用橡膠軟管和管.規范.第1部分:柴油
| Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 1: Diesel fuels
|
| ISO 19013-2-2005
| 內燃機燃料回路用橡膠軟管和管.規范.第2部分:汽油
| Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Part 2: Gasoline fuels
|
| ISO 19432-2006
| 建筑施工機械和設備.便攜、手持、內燃機驅動的切斷機.安全要求和試驗
| Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements and testing
|
| ISO 19438-2003
| 內燃機用柴油燃料和汽油過濾器.用粒子計數及污物滯留量評定過濾效率
| Diesel fuel and petrol filters for internal combustion engines - Filtration efficiency using particle counting and contaminant retention capacity
|
| ISO 21006-2006
| 內燃機.發動機重量（質量）說明
| Internal combustion engines - Engine weight (mass) declaration
|
| ISO 2261-1994
| 往復式內燃機 手操縱控制機構 標準動作方向
| Reciprocating internal combustion engines - Hand-operated control devices - Standard direction of motion
|
| ISO 22867-2004
| 林業機械.帶內燃機的便攜式手持機械的振動試驗規范.手柄處的振動
| Forestry machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles
|
| ISO 22868-2005
| 林用機械.帶內燃機的便攜手持式機械的噪聲試驗規范.工程法(2級準確度)
| Forestry machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy)
|
| ISO 2710-1-2000
| 往復式內燃機 詞匯 第1部分:發動機設計和運行術語 三種語言版
| Reciprocating internal combustion engines - Vocabulary - Part 1: Terms for engine design and operation
|
| ISO 2710-2-1999
| 往復式內燃機 詞匯 第2部分:發動機維修術語 三種語言版
| Reciprocating internal combustion engines - Vocabulary - Part 2: Terms for engine maintenance
|
| ISO 3046-1-2002
| 往復式內燃機.性能.第1部分:功率、燃料消耗量和潤滑油消耗量和試驗方法說明.通用內燃機的附加要求
| Reciprocating internal combustion engines - Performance - Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods; Additional requirements for engines for general use
|
| ISO 3046-4-1997
| 往復式內燃機 性能 第4部分:調速
| Reciprocating internal combustion engines - Part 4: Speed governing
|
| ISO 3046-5-2001
| 往復式內燃機 性能 第5部分:扭轉振動
| Reciprocating internal combustion engines - Performance - Part 5: Torsional vibrations
|
| ISO 3046-6-1990
| 往復式內燃機 性能 第6部分:超速保護
| Reciprocating internal combustion engines; performance; part 6: overspeed protection
|
| ISO 4081-2005
| 內燃機用制冷系統用橡膠軟管和管件.規范
| Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification
|
| ISO 4548-1-1997
| 內燃機全流式機油濾清器試驗方法 第1部分:壓差/流量特性
| Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 1: Differential pressure/flow characteristics
|
| ISO 4548-11-1997
| 內燃機全流式機油濾清器試驗方法 第11部分:自潔式濾清器
| Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 11: Self-cleaning filters
|
| ISO 4548-12-2000
| 內燃機全流式機油濾清器試驗方法 第12部分:采用顆粒計數法測定濾清效率和容灰量
| Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capacity
|
| ISO 4548-2-1997
| 內燃機全流式機油濾清器試驗方法 第2部分:濾芯旁通閥特性
| Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 2: Element by-pass valve characteristics
|
| ISO 4548-3-1997
| 內燃機全流式機油濾清器試驗方法 第3部分:耐高壓差和耐高溫性
| Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 3: Resistance to high differential pressure and to elevated temperature
|
| ISO 4548-4-1997
| 內燃機全流式機油濾清器試驗方法 第4部分:原始容灰量、濾芯壽命和累積效率(重量法)
| Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 4: Initial particle retention efficiency, life and cumulative efficiency (gravimetric method)
|
| ISO 4548-5-1990
| 內燃機全流式機油濾清器試驗方法 第5部分:冷起動模擬和液壓脈沖耐久性試驗
| Methods of test for full-flow lubricating oil filters for internal combustion engines; part 5: cold start simulation and hydraulic pulse durability test
|
| ISO 4548-6 Technical Corrigendum 1-1990
| 內燃機全流式機油濾清器試驗方法 第6部分:靜態爆破壓力試驗 技術勘誤1
| Methods of test for full-flow lubricating oil filters for internal combustion engines; part 6: static burst pressure test; technical corrigendum 1
|
| ISO 4548-6-1985
| 內燃機全流式機油濾清器試驗方法 第6部分:靜態爆破壓力試驗
| Methods of test for full-flow lubricating oil filters for internal combustion engines; Part 6 : Static burst pressure test
|
| ISO 4548-7-1990
| 內燃機全流式機油濾清器試驗方法 第7部分:振動疲勞試驗
| Methods of test for full-flow lubricating oil filters for internal combustion engines; part 7: vibration fatigue test
|
| ISO 4548-9-1995
| 內燃機全流式機油濾清器試驗方法 第9部分:進、出口止回閥試驗
| Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 9: Inlet and outlet anti-drain valve tests
|
| ISO 5011-2000
| 內燃機和壓縮機的空氣進氣清潔裝置 性能測試
| Inlet air cleaning equipment for internal combustion engines and compressors - Performance testing
|
| ISO 6415-2005
| 內燃機.離心式潤滑油濾清器.尺寸
| Internal combustion engines - Spin-on filters for lubricating oil - Dimensions
|
| ISO 6621-1-1986
| 內燃機 活塞環 第1部分:詞匯
| Internal combustion engines; Piston rings; Part 1 : Vocabulary
|
| ISO 6621-2-2003
| 內燃機.活塞環.第2部分:檢驗測量規則
| Internal combustion engines - Piston rings - Part 2: Inspection measuring principles
|
| ISO 6621-3-2000
| 內燃機 活塞環 第3部分:技術規范
| Internal combustion engines - Piston rings - Part 3: Material specifications (Revision of ISO 6621-3:1983)
|
| ISO 6621-4-2003
| 內燃機.活塞環.第4部分:一般規范
| Internal combustion engines - Piston rings - Part 4: General specifications
|
| ISO 6621-5-2005
| 內燃機.活塞環.第5部分:質量要求
| Internal combustion engines - Piston rings - Part 5: Quality requirements
|
| ISO 6622-1-2003
| 內燃機.活塞環.第1部分:矩形鑄鐵環
| Internal combustion engines - Piston rings - Part 1: Rectangular rings made of cast iron
|
| ISO 6622-2-2003
| 內燃機.活塞環.第2部分:矩形鋼環
| Internal combustion engines - Piston rings - Part 2: Rectangular rings made of steel
|
| ISO 6623-2004
| 內燃機.活塞環.鑄鐵刮環
| Internal combustion engines - Piston rings - Scraper rings made of cast iron
|
| ISO 6624-1-2001
| 內燃機 活塞環 第1部分：鑄鐵梯形環
| Internal combustion engines - Piston rings - Part 1: Keystone rings made of cast iron
|
| ISO 6624-2-2003
| 內燃機.活塞環.第2部分:半梯形鑄鐵環
| Internal combustion engines - Piston rings - Part 2: Half keystone rings made of cast iron
|
| ISO 6624-3-2001
| 內燃機 活塞環 第3部分：鋼制梯形環
| Internal combustion engines - Piston rings - Part 3: Keystone rings made of steel
|
| ISO 6624-4-2003
| 內燃機.活塞環.第4部分:半梯形鋼環
| Internal combustion engines - Piston rings - Part 4: Half keystone rings made of steel
|
| ISO 6626-1989
| 內燃機.活塞環.螺旋撐簧油環
| Internal combustion engines; piston rings; coil-spring-loaded oil control rings
|
| ISO 6626-2-2003
| 內燃機.活塞環.第2部分:窄鑄鐵環帶的螺旋撐簧油環
| Internal combustion engines - Piston rings -- Part 2 Coil-spring-loaded oil control rings of narrow width made of cast iron
|
| ISO 6627-2000
| 內燃機 活塞環 漲簧/組合控油環
| Internal combustion engines - Piston rings - Expander/segment oil-control rings
|
| ISO 6743-15-2000
| 潤滑劑、工業潤滑油和有關產品(L類) 分類 第15部分:E組(內燃機油)
| Lubricants, industrial oils and related products (class L) - Classification - Part 15: Family E (Internal combustion engine oils)
|
| ISO 6798-1995
| 往復式內燃機 輻射的空氣噪聲測量 工程法和簡易法
| Reciprocating internal combustion engines - Measurement of emitted airborne noise - Engineering method and survey method
|
| ISO 6826-1997
| 往復式內燃機 防火
| Reciprocating internal combustion engines - Fire protection
|
| ISO 683-15-1992
| 熱處理鋼、合金鋼和易切鋼 第15部分:內燃機用閥門鋼
| Heat-treatable steels, alloy steels and free-cutting steels; part 15: valve steels for internal combustion engines
|
| ISO 7648-1987
| 往復式內燃機飛輪殼 基本尺寸和公差
| Flywheel housings for reciprocating internal combustion engines; Nominal dimensions and tolerances
|
| ISO 7649-1991
| 往復式內燃機離合器殼 標稱尺寸和公差
| Clutch housings for reciprocating internal combustion engines; nominal dimensions and tolerances
|
| ISO 7967-1-2005
| 往復式內燃機.零部件和系統詞匯.第1部分:固定件和外部罩蓋
| Reciprocating internal combustion engines - Vocabulary of components and systems - Part 1: Structure and external covers
|
| ISO 7967-2 AMD 1-1999
| 往復式內燃機 零部件和系統詞匯 第2部分:主要運動件 修改1 兩種語言版
| Reciprocating internal combustion engines - Vocabulary of components and systems - Part 2: Main running gear; Amendment 1
|
| ISO 7967-2-1987
| 往復式內燃機 零部件和系統詞匯 第2部分:主要運動件 三種語言版
| Reciprocating internal combustion engines; Vocabulary of components and systems; Part 2 : Main running gear Trilingual edition
|
| ISO 7967-3-1987
| 往復式內燃機 零部件和系統詞匯 第3部分:氣門、凸輪軸傳動和驅動機構 三種語言版
| Reciprocating internal combustion engines; Vocabulary of components and systems; Part 3 : Valves, camshaft drive and actuating mechanisms Trilingual edition
|
| ISO 7967-4-2005
| 往復式內燃機.零部件和系統詞匯.第4部分:增壓及進/排氣管系統
| Reciprocating internal combustion engines - Vocabulary of components and systems - Part 4: Pressure charging and air/exhaust gas ducting systems
|
| ISO 7967-5-2003
| 往復式內燃機.零件和系統的詞匯.第5部分:冷卻系統
| Reciprocating internal combustion engines - Vocabulary of components and systems - Part 5: Cooling systems
|
| ISO 7967-6-2005
| 往復式內燃機.零部件和系統詞匯.第6部分:潤滑系統
| Reciprocating internal combustion engines - Vocabulary of components and systems - Part 6: Lubricating systems
|
| ISO 7967-7 Technical Corrigendum 1-2006
| 往復式內燃機.零部件和系統詞匯.第7部分:調節系統.技術勘誤1
| Reciprocating internal combustion engines - Vocabulary of components and systems - Part 7: Governing systems; Technical Corrigendum 1
|
| ISO 7967-7-2005
| 往復式內燃機.零部件和系統詞匯.第7部分:調節系統
| Reciprocating internal combustion engines - Vocabulary of components and systems - Part 7: Governing systems
|
| ISO 7967-8-2005
| 往復式內燃機.零部件和系統詞匯.第8部分:起動系統
| Reciprocating internal combustion engines - Vocabulary of components and systems - Part 8: Starting systems
|
| ISO 7967-9-1996
| 往復式內燃機 零部件和系統詞匯 第9部分:控制和監測系統 三種語言版
| Reciprocating internal combustion engines - Vocabulary of components and systems - Part 9: Control and monitoring systems
|
| ISO 8178-10-2002
| 往復式內燃機.排放測量.第10部分:壓燃式發動機瞬態工況排氣煙度現場測量用試驗周期和試驗方法
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 10: Test cycles and test procedures for field measurements of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
|
| ISO 8178-11-2006
| 往復式內燃機.廢氣排放測量.第11部分:瞬態試驗條件下非道路車輛發動機排氣和顆粒廢物排放量現場測量
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
|
| ISO 8178-2-1996
| 往復式內燃機 排放測量 第2部分:氣體和顆粒排放物的現場測量
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions at site
|
| ISO 8178-3-1994
| 往復式內燃機 排放測量 第3部分:穩態工況排氣煙度的定義及測量方法
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 3: Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
|
| ISO 8178-4-1996
| 往復式內燃機 排放測量 第4部分:不同用途發動機的試驗周期
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Test cycles for different engine applications
|
| ISO 8178-5-1997
| 往復式內燃機.排氣污染測定.第5部分:燃料試驗
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels
|
| ISO 8178-6-2000
| 往復式內燃機 排放測量 第6部分:測量結果和試驗報告
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and test
|
| ISO 8178-7-1996
| 往復式內燃機 排放測量 第7部分:發動機系族的確定
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 7: Engine family determination
|
| ISO 8178-8-1996
| 往復式內燃機 排放測量 第8部分:發動機系組的確定
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 8: Engine group determination
|
| ISO 8178-9 AMD 1-2004
| 往復式內燃機.排放測量.第9部分:壓燃式發動機瞬態工況排氣煙度試驗臺測量用試驗周期和試驗方法
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions; Amendment 1
|
| ISO 8178-9-2000
| 往復式內燃機 排放測量 第9部分:壓燃式發動機瞬態工況排氣煙度試驗臺測量用試驗方法和試驗周期
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
|
| ISO 8528-3-2005
| 往復式內燃機驅動的交流發電機組.第3部分:發電機組用交流發電機
| Reciprocating internal combustion engine driven alternating current generating sets - Part 3: Alternating current generators for generating sets
|
| ISO 8528-5-2005
| 往復式內燃機驅動的交流發電機組.第5部分:發電機組
| Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets
|
| ISO 8665-2006
| 小型船舶.海船推進往復式內燃機.動力測量和說明
| Small craft - Marine propulsion reciprocating internal combustion engines - Power measurements and declarations
|
| ISO 8999-2001
| 往復式內燃機 圖形符號
| Reciprocating internal combustion engines - Graphical symbols
|
| ISO 9785-2002
| 船舶和海上技術.可行駛內燃機車輛的貨艙的通風.氣流總需量的理論計算
| Ships and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines are driven - Calculation of theoretical total airflow required
|
| 編號 | 中文名稱 | 英文名稱 |
|---|