| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| CISPR 12 AMD 1-2009 | 車輛、船只和內燃機.無線電干擾特性.外接接收器保護用測量方法和限值.修改件1 | Vehicles, boats and internal combustion engines – Radio disturbancecharacteristics – Limits and methods of measurement for the protection of offboardreceiversAMENDMENT 1 |
| CISPR 15-2009 | 電氣照明和類似設備的無線電干擾特性用測量方法和限值 | Limits and methods of measurement of radio disturbance characteristics ofelectrical lighting and similar equipment |
| CISPR 16-2-1 Edition 1.2-2008 | 無線電干擾和抗擾性測量裝置及方法用規范.第2-1部分:干擾性和抗擾性測量方法.傳導干擾測量 | pecification for radio disturbance and immunity measuring apparatus andmethods –Part 2-1: Methods of measurement of disturbances and immunity – Conducteddisturbance measurements |
| CISPR 16-4-1/TR-2005 | 無線電騷擾和抗擾度測量設備和測量方法規范 第4-1部分:不確定度、統計學和限值建模標準化的EMC試驗不確定 | Specification for radio disturbance and immunity measuring apparatus and methods--Part4-1:Uncertainties,statistics and limit modelling -Uncertainties in standardized EMC tests |
| CISPR 16-4-3/TR-2004 | 無線電騷擾和抗擾度測量設備和測量方法規范 第4-3部分:不確定度、統計學和限值建模批量產品的EMC符合性確 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3:Uncertainties, statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced products |
| CISPR 22-2008 | 信息技術設備.無線電干擾特性.限值和測量方法 | Information technology equipment – Radio disturbance characteristics –Limits and methods of measurement |
| CISPR 25 Corrigendum 1-2009 | 車輛、船只和內燃機.無線電干擾特性.車載/船載接收器保護用測量方法和限值.技術勘誤1 | Vehicles, boats and internal combustion engines – Radio disturbance characteristics –Limits and methods of measurement for the protection of on-board receiversCorrigendum 1 |
| IEC 60094-3 AMD 2-1988 | 磁帶錄音和重放系統 第3部分:磁帶錄音和放音設備特性的測量方法 修改2 | Magnetic tape sound recording and reproducing systems. Part 3: Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape |
| IEC 60094-3 AMD 3-1996 | 磁帶錄音和重放系統 第3部分:磁帶錄音和放音設備特性的測量方法 修改3 | Magnetic tape sound recording and reproducing systems - Part 3: Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape; Amendment 3 |
| IEC 60094-3-1979 | 磁帶錄音和重放系統 第3部分:磁帶錄音和放音設備特性的測量方法 | Magnetic tape sound recording and reproducing systems. Part 3 : Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape |
| IEC 60100 AMD 1-1969 | 電子管極間電容的測量方法 修改1 | Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves |
| IEC 60100-1962 | 電子管極間電容的測量方法 | Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves |
| IEC 60107-1-1997 | 電視廣播傳輸接收機的測量方法 第1部分:一般要求 廣播和電視頻率顯示的測量 | Methods of measurement on receivers for television broadcast transmissions - Part 1: General considerations - Measurements on displays at radio and video frequencies |
| IEC 60107-2-1997 | 電視廣播傳輸接收機的測量方法 第2部分:音頻通道 一般方法與單聲道方法 | Methods of measurement on receivers for television broadcast transmissions - Part 2: Audio channels - General methods and methods for monophonic channels |
| IEC 60107-3 AMD 1-1999 | 電視廣播傳輸接收機的推薦測量方法 第3部分:用副載系統多聲道電視接收機的電氣測量 修改1 | Recommended methods of measurement on receivers for television broadcast transmissions - Part 3: Electrical measurements on multichannel sound television receivers using subcarrier systems; Amendment 1 |
| IEC 60107-3-1988 | 電視廣播傳輸接收機的推薦測量方法 第3部分:用副載系統多聲道電視接收機的電氣測量 | Recommended methods of measurement on receivers for television broadcast transmissions; part 3: electrical measurements on multichannel sound television receivers using subcarrier systems |
| IEC 60107-4 AMD 1-1999 | 電視廣播傳輸接收機的推薦測量方法 第4部分:雙載波調頻系統多聲道電視接收機的電氣測量 修改1 | Recommended methods of measurement on receivers for television broadcast transmissions - Part 4: Electrical measurements on multichannel sound television receivers using the two-carrier FM-system; Amendment 1 |
| IEC 60107-4 Edition 1.1-1999 | 電視廣播接收機的推薦測量方法.第4部分:使用雙載波調頻系統多聲道電視接收機的電氣性能測量 | Recommended methods of measurement on receivers for television broadcast transmissions - Part 4: Electrical measurements on multichannel sound television receivers using the two-carrier FM-system |
| IEC 60107-4-1988 | 電視廣播傳輸接收機的推薦測量方法 第4部分:雙載波調頻系統多聲道電視接收機的電氣測量 | Recommended methods of measurement on receivers for television broadcast transmissions; part 4: electrical measurements on multichannel sound television receivers using the two-carrier FM-system |
| IEC 60107-5 AMD 1-1999 | 電視廣播傳輸接收機的推薦測量方法 第5部分:使用NICAM雙聲道數字音頻系統對多聲道電視接收機的電氣測量 修 | Recommended methods of measurement on receivers for television broadcast transmissions - Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system; Amendment 1 |
| IEC 60107-5 Edition 1.1-1999 | 電視廣播接收機的推薦測量方法.第5部分:使用NICAM雙聲道數字音頻系統多聲道電視接收機的電氣性能測量 | Recommended methods of measurements on receivers for television broadcast transmissions - Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system |
| IEC 60107-5-1992 | 電視廣播傳輸接收機的推薦測量方法 第5部分:使用NICAM雙聲道數字音頻系統對多聲道電視接收機的電氣測量 | Recommended methods of measurement on receivers for television broadcast transmissions; part 5: electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system |
| IEC 60107-6-1989 | 電視廣播傳輸接收機的推薦測量方法 第6部分:非廣播信號標準條件下的測量 | Recommended methods of measurement on receivers for television broadcast transmissions; part 6: measurement under conditions different from broadcast signal standards |
| IEC 60107-7-1997 | 電視廣播傳輸接收機的推薦測量方法 第7部分:HDTV顯示器 | Methods of measurement on receivers for television - Part 7: HDTV displays |
| IEC 60118-9-1985 | 助聽器 第9部分:帶有骨振輸出的助聽器性能測量方法 | Hearing aids. Part 9 : Methods of measurement of characteristics of hearing aids with bone vibrator output |
| IEC 60151-0-1966 | 電子管電性能的測量 第0部分:電子管測量方法的有關注意事項 | Precautions relating to methods of measurement of electronic tubes and valves |
| IEC 60151-10-1966 | 電子管電性能的測量 第10部分:音頻輸出功率和失真的測量方法 | Measurements of the electrical properties of electronic tubes. Part 10 : Methods of measurement of audio-frequency output power and distortion |
| IEC 60151-11-1966 | 電子管電性能的測量 第11部分:射頻輸出功率的測量方法 | Measurements of the electrical properties of electronic tubes. Part 11 : Methods of measurement of radiofrequency output power |
| IEC 60151-12-1966 | 電子管電性能的測量 第12部分:電極電阻、跨導、放大系數、變頻電阻和變頻跨導的測量方法 | Measurements of the electrical properties of electronic tubes. Part 12 : Methods of measuring electrode resistance, transconductance,amplification factor, conversion resistance and conversion transconductance |
| IEC 60151-13-1966 | 電子管電性能的測量 第13部分:高真空電子管熱陰極發射電流的測量方法 | Measurements of the electrical properties of electronic tubes. Part 13 : Methods of measurement of emission current from hot cathodes for high-vacuum electronic tubes and valves |
| IEC 60151-14-1975 | 電子管電性能的測量 第14部分:雷達和示波陰極射線管的測量方法 | Measurements of the electrical properties of electronic tubes. Part 14 : Methods of measurement of radar and oscilloscope cathode-ray tubes |
| IEC 60151-15-1967 | 電子管電性能的測量 第15部分:寄生和不需要的電極電流的測量方法 | Measurements of the electrical properties of electronic tubes. Part 15 : Methods of measurement of spurious and unwanted electrode currents |
| IEC 60151-16-1968 | 電子管電性能的測量 第16部分:電視顯像管的測量方法 | Measurements of the electrical properties of electronic tubes. Part 16 : Methods of measurement for television picture tubes |
| IEC 60151-17-1969 | 電子管電性能的測量 第17部分:充氣管的測量方法 | Measurements of the electrical properties of electronic tubes. Part 17 : Methods of measurement of gas filled tubes and valves |
| IEC 60151-18-1968 | 電子管電性能的測量 第18部分:由機械或聲音激勵引起的噪聲的測量方法 | Measurements of the electrical properties of electronic tubes. Part 18 : Methods of measurement of noises due to mechanical or acoustic excitations |
| IEC 60151-19-1969 | 電子管電性能的測量 第19部分:電暈穩壓管的測量方法 | Measurements of the electrical properties of electronic tubes. Part 19 : Methods of measurement on corona stabilizers |
| IEC 60151-20-1969 | 電子管電性能的測量 第20部分:閘流管脈沖調制器的測量方法 | Measurements of the electrical properties of electronic tubes. Part 20 : Methods of measurement of thyratron pulse modulators |
| IEC 60151-21-1969 | 電子管電性能的測量 第21部分:電子管交叉調制的測量方法 | Measurements of the electrical properties of electronic tubes. Part 21 : Methods of measurement of cross-modulation in electronic tubes and valves |
| IEC 60151-22-1970 | 電子管電性能的測量 第22部分:冷陰極計數管和指示管的測量方法 | Measurements of the electrical properties of electronic tubes. Part 22 : Methods of measurement for cold cathode counting and indicator tubes |
| IEC 60151-23-1970 | 電子管電性能的測量 第23部分:真空脈沖調制管的測量方法 | Measurements of the electrical properties of electronic tubes. Part 23 : Methods of measurement of vacuum pulse modulator tubes and valves |
| IEC 60151-24-1971 | 電子管電性能的測量 第24部分:陰極射線電荷存儲管的測量方法 | Measurements of the electrical properties of electronic tubes. Part 24 : Methods of measurement of cathode-ray charge-storage tubes |
| IEC 60151-25-1971 | 電子管電性能的測量 第25部分:蓋格-彌勒計數管的測量方法 | Measurements of the electrical properties of electronic tubes. Part 25 : Methods of measurement of Geiger-Müller counter tubs |
| IEC 60151-26-1971 | 電子管電性能的測量 第26部分:攝像管的測量方法 | Measurements of the electrical properties of electronic tubes. Part 26 : Methods of measurement for camera tubes |
| IEC 60151-27-1974 | 電子管電性能的測量 第27部分:發射管互調分量的測量方法 | Measurements of the electrical properties of electronic tubes. Part 27 : Methods of measurement for intermodulation products in transmitting tubes |
| IEC 60151-28-1978 | 電子管電性能的測量 第28部分:彩色電視顯像管的測量方法 | Measurements of the electrical properties of electronic tubes. Part 28 : Methods of measurement of colour television picture tubes |
| IEC 60151-4-1963 | 電子管電性能的測量 第4部分:噪聲系數的測量方法 | Measurements of the electrical properties of electronic tubes. Part 4 : Methods of measuring noise factor |
| IEC 60151-5-1964 | 電子管電性能的測量 第5部分:噓聲和哼聲的測量方法 | Measurements of the electrical properties of electronic tubes. Part 5 : Methods of measuring hiss and hum |
| IEC 60151-9-1966 | 電子管電性能的測量 第9部分:陰極中間層阻抗的測量方法 | Measurements of the electrical properties of electronic tubes. Part 9 : Methods of measuring the cathode-interface impedance |
| IEC 60153-1-1964 | 空心金屬波導 第1部分:一般要求和測量方法 | Hollow metallic waveguides. Part 1 : General requirements and measuring methods |
| IEC 60169-1 AMD 1-1996 | 射頻連接器 第1部分:一般要求和測量方法 修改1 | Radio-frequency connectors - Part 1: General requirements and measuring methods; Amendment 1 |
| IEC 60169-1-1-1987 | 射頻連接器 第1部分:一般要求和測量方法 第1節:電氣試驗和測量方法:反射系數 | Radio-frequency connectors. Part 1 : General requirements and measuring methods. Section One: Electrical tests and measuring procedures: Reflection factor |
| IEC 60169-1-1987 | 射頻連接器 第1部分:一般要求和測量方法 | Radio-frequency connectors. Part 1 : General requirements and measuring methods |
| IEC 60169-1-3 AMD 1-1996 | 射頻連接器 第1部分:一般要求和測量方法 第3節:電氣試驗和測量程序:屏蔽效率 修改1 | Radio-frequency connectors - Part 1: General requirements and measuring methods - Section 3: Electrical tests and measuring procedures: Screening effectiveness; Amendment 1 |
| IEC 60169-1-3-1988 | 射頻連接器 第1部分:一般要求和測量方法 第3節:電氣試驗和測量方法:屏蔽效率 | Radio-frequency connectors. Part 1: General requirements and measuring methods. Section Three - Electrical tests and measuring procedures : Screening effectiveness |
| IEC 60189-1-2007 | 聚氯乙烯(PVC)絕緣材料和聚氯乙烯(PVC)護套的低頻電纜和電線.第1部分:一般試驗和測量方法 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods |
| IEC 60191-6-19-2010 | 半導體器件的機械標準化.第6-19部分:在高溫及最大允許翹曲下構裝翹曲的測量方法 | Mechanical standardization of semiconductor devices - Part 6-19: Measurement methods of package warpage at elevated temperature and the maximum permissible warpage |
| IEC 60191-6-3-2000 | 半導體器件的機械標準化 第6-3部分:繪制表面安裝半導體器件封裝外形圖的一般規則 四面扁平封裝尺寸的測量方 | Mechanical standardization of semiconductor devices - Part 6-3: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Measuring methods for package dimensions of quad flat packs (QFP) |
| IEC 60191-6-4-2003 | 半導體器件的機械標準化.第6-4部分:繪制表面安裝半導體器件封裝外形圖的一般規則.焊球網格陳列封裝尺寸的測 | Mechanical standardization of semiconductor devices - Part 6-4: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Measuring methods for package dimensions of ball grid array (BGA) |
| IEC 60195-1965 | 固定電阻器產生電流噪聲測量方法 | Method of measurement of current noise generated in fixed resistors |
| IEC 60235-2A-1974 | 微波管電性能的測量 第2部分:一般測量 補充1:第4章:寄生噪聲的測量方法 | Measurement of the electrical properties of microwave tubes. Part 2 : General measurements. First supplement: Chapter V: Methods of measuring parasitic noise |
| IEC 60244-1-1999 | 無線電發射機的測量方法 第1部分:廣播發射機的一般特性 | Methods of measurement for radio transmitters - Part 1: General characteristics for broadcast transmitters |
| IEC 60244-10-1986 | 無線電發射機的測量方法 第10部分:采用插入測試信號的電視發射機和差轉機的測量方法 | Methods of measurement for radio transmitters. Part 10 : Methods of measurement for television transmitters and transposers employing insertion test signals |
| IEC 60244-11-1989 | 無線電發射機的測量方法 第11部分:調頻聲音廣播差轉機 | Methods of measurement for radio transmitters; part 11: transposers for FM sound broadcasting |
| IEC 60244-12-1-1989 | 無線電發射機的測量方法 第12部分:聲音及電視廣播發射機及差轉機的散頁說明書編寫指南 應規定的特性 | Methods of measurement for radio transmitters; part 12: guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting; characteristics to be specified |
| IEC 60244-12-2-1989 | 無線電發射機的測量方法 第12部分:聲音及電視廣播發射機及差轉機的散頁說明書編寫指南 單篇規范 | Methods of measurement for radio transmitters; part 12: guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting; specification sheets |
| IEC 60244-13-1991 | 無線電發射機的測量方法 第13部分:調頻聲音廣播的性能特性 | Methods of measurement for radio transmitters; part 13: performance characteristics for FM sound broadcasting |
| IEC 60244-14-1997 | 無線電發射機的測量方法 第14部分:由兩個或多個使用相同或相近天線的發射機造成的外部互調產物 | Methods of measurement for radio transmitters - Part 14: External intermodulation products caused by two or more transmitters using the same or adjacent antennas |
| IEC 60244-15-1999 | 無線電發射機的測量方法 第15部分:聲音廣播用調幅發射機 | Methods of measurement for radio transmitters - Part 15: Amplitude-modulated transmitters for sound broadcasting |
| IEC 60244-2 AMD 1-1974 | 無線電發射機的測量方法 第2部分:帶寬、帶外功率和非本振功率 修改1 | Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations |
| IEC 60244-2-1969 | 無線電發射機的測量方法 第2部分:帶寬、帶外功率和非本振功率 | Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations |
| IEC 60244-2A AMD 1-1973 | 無線電發射機的測量方法 第2部分:帶寬、帶外功率和非本振功率 補充1:附錄 修改1 | Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations. First supplement: Appendices |
| IEC 60244-2A-1969 | 無線電發射機的測量方法 第2部分:帶寬、帶外功率和非本振功率 補充1:附錄 | Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations. First supplement: Appendices |
| IEC 60244-2B-1969 | 無線電發射機的測量方法 第2部分:帶寬、帶外功率和非主振功率 補充2:用于電話及聲音廣播發射機的帶寬及帶外 | Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations. Second supplement: Modulating signals for the measurement of bandwidth and out-of-band power of transmitters for telephony and sound broadcasting |
| IEC 60244-3-1972 | 無線電發射機的測量方法 第3部分:有用調制和無用調制 | Methods of measurement for radio transmitters. Part 3 : Wanted and unwanted modulation |
| IEC 60244-3A-1971 | 無線電發射機的測量方法 第3部分:有用調制和無用調制 補充1:附錄 | Methods of measurement for radio transmitters. Part 3 : Wanted and unwanted modulation. First supplement: Appendices |
| IEC 60244-3B-1972 | 無線電發射機的測量方法 第3部分:有用調制和無用調制 補充2:無用調制，包括交流及噪聲調制 | Methods of measurement for radio transmitters. Part 3 : Wanted and unwanted modulation. Second supplement: Unwanted modulation, including hum and noise modulation |
| IEC 60244-4-1973 | 無線電發射機的測量方法 第4部分:無線電話和聲音廣播發射機的幅/頻特性及非線性失真 | Methods of measurement for radio transmitters. Part 4 : Amplitude/frequency characteristics and non-linearity distortion in transmitters for radiotelephony and sound broadcasting |
| IEC 60244-4A-1976 | 無線電發射機的測量方法 第4部分:無線電話和聲音廣播發射機的幅/頻特性及非線性失真 補充1:第3節 | Methods of measurement for radio transmitters. Part 4 : Amplitude/frequency characteristics and non-linearity distortion in transmitters for radiotelephony and sound broadcasting. First supplement: Section three |
| IEC 60244-5-1992 | 無線電發射機的測量方法 第5部分:電視發射機的性能特性 | Methods of measurement for radio transmitters; part 5: performance characteristics of television transmitters |
| IEC 60244-6-1976 | 無線電發射機的測量方法 第6部分:在130KHz-1GHz頻率范圍內的機箱輻射 | Methods of measurement for radio transmitters. Part 6 : Cabinet radiation at frequencies between 130 kHz and 1 GHz |
| IEC 60244-7-1979 | 無線電發射機的測量方法 第7部分:在1GHz以上頻率的機箱輻射 | Methods of measurement for radio transmitters. Part 7 : Cabinet radiation at frequencies above 1 GHz |
| IEC 60244-7A-1980 | 無線電發射機的測量方法 第7部分:在1GHz以上頻率的機箱輻射 補充1:第4節:中型發射機 第5節:大型發射機 | Methods of measurement for radio transmitters. Part 7 : Cabinet radiation at frequencies above 1 GHz. First supplement: Sections four and five: Medium-sized and large transmitters |
| IEC 60244-8-1993 | 無線電發射機的測量方法 第8部分:用于測量電視發射機和差轉機的殘留邊帶解調器的性能特性 | Methods of measurement for radio transmitters; part 8: performance characteristics of vestigal-sideband demodulators used for testing television transmitters and transposers |
| IEC 60244-9-1993 | 無線電發射機的測量方法 第9部分:電視差轉機的性能特性 | Methods of measurement for radio transmitters; part 9: performance characteristics for television transposers |
| IEC 60306-2-1969 | 光敏器件的測量 第2部分:光電管的測量方法 | Measurement of photosensitive devices. Part 2 : Methods of measurement of phototubes |
| IEC 60306-3-1970 | 光敏器件的測量 第3部分:用于可見光譜的光電導管的測量方法 | Measurement of photosensitive devices. Part 3 : Methods of measurement of photoconductive cells for use in the visible spectrum |
| IEC 60306-4-1971 | 光敏器件的測量 第4部分:光電倍增管的測量方法 | Measurement of photosensitive devices. Part 4 : Methods of measurement of photo multipliers |
| IEC 60311 AMD 1-2005 | 家用或類似用途的電熨斗性能測量方法.修改件1 | Amendment 1 - Electric irons for household or similar use - Methods for measuring performance |
| IEC 60311 AMD 2-2009 | 家用或類似用途的電熨斗.性能測量方法.修改件2 | Electric irons for household or similar use - Methods for measuring performance; Amendment 2 |
| IEC 60311 Edition 4.1-2006 | 家用和類似用途的電熨斗.性能測量方法 | Electric irons for household or similar use - Methods for measuring performance |
| IEC 60311-2002 | 家用或類似用途的電熨斗.性能測量方法 | Electric irons for household or similar use - Methods for measuring performance |
| IEC 60315-1 Corrigendum 1-1997 | 各種發射類別的無線電接收機的測量方法.第1部分:一般考慮和測量(包括音頻測量)方法 | Methods of measurement on radio receivers for various classes of emission; part 1: general considerations and methods of measurement, including audio-frequency measurements |
| IEC 60315-1-1988 | 各種發射類別的無線電接收機的測量方法 第1部分:一般考慮和測量(包括音頻測量)方法 | Methods of measurement on radio receivers for various classes of emission; part 1: general considerations and methods of measurement, including audio-frequency measurements |
| IEC 60315-3 AMD 1-1999 | 各種發射類別的無線電接收機的測量方法 第3部分:調幅聲音廣播發射接收機 修改1 | Methods of measurement on radio receivers for various classes of emission - Part 3: Receivers for amplitude-modulated sound-broadcasting emissions; Amendment 1 |
| IEC 60315-3 Corrigendum 1-1994 | 各種發射類別的無線電接收機的測量方法.第3部分:調幅聲音廣播發射接收機 | Methods of measurement on radio receivers for various classes of emission; part 3: receivers for amplitude-modulated sound-broadcasting emissions |
| IEC 60315-3 Edition 2.1-1999 | 各種發射類別的無線電接收機的測量方法. 第3部分:放大調制聲音播送接收器. | Methods of measurement on radio receivers for various classes of emission - Part 3: Receivers for amplitude-modulated sound-broadcasting emissions |
| IEC 60315-3-1989 | 各種發射類別的無線電接收機的測量方法 第3部分:調幅聲音廣播發射接收機 | Methods of measurement on radio receivers for various classes of emission; part 3: receivers for amplitude-modulated sound-broadcasting emissions |
| IEC 60315-4-1997 | 各種發射類別的無線電接收機的測量方法 第4部分:調頻聲音廣播發射接收機 | Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions |
| IEC 60315-6 Corrigendum 1-1997 | 各種發射類別的無線電接收機的測量方法.第6部分:一般用途通信接收機 | Methods of measurement on radio receivers for various classes of emission; part 6: general purpose communication receivers |
| IEC 60315-6-1991 | 各種發射類別的無線電接收機的測量方法 第6部分:一般用途通信接收機 | Methods of measurement on radio receivers for various classes of emission; part 6: general purpose communication receivers |
| IEC 60315-9-1996 | 各種發射類別的無線電接收機的測量方法 第9部分:與無線電數據系統接收相關特性的測量 | Methods of measurement on radio receivers for various classes of emission - Part 9: Measurement of the characteristics relevant to radio data system (RDS) reception |
| IEC 60339-1-1971 | 一般用途的剛性同軸傳輸線及其相關法蘭連接器 第1部分:一般要求和測量方法 | General purpose rigid coaxial transmission lines and their associated flange connectors. Part 1 : General requirements and measuring methods |
| IEC 60350 Edition 2.2-2009 | 家用電灶、灶臺、烤爐和烤架.性能測量方法 | Electric cooking ranges, hobs, ovens and grills for household use - Methods for measuring performance |
| IEC 60360 Corrigendum 1-1999 | 燈頭溫升的標準測量方法 | Standard method of measurement of lamp cap temperature rise ;Corrigendum 1 |
| IEC 60360-1998 | 燈頭溫升的標準測量方法 | Standard method of measurement of lamp cap temperature rise |
| IEC 60379-1987 | 家用電熱水器性能測量方法 | Methods for measuring the performance of electrical water-heaters for household purposes |
| IEC 60386 AMD 1-1988 | 錄音和重放設備速度波動的測量方法 修改1 | Method of measurement of speed fluctuations in sound recording and reproducing equipment |
| IEC 60386-1972 | 錄音和重放設備速度波動的測量方法 | Method of measurement of speed fluctuations in sound recording and reproducing equipment |
| IEC 60404-10-1988 | 磁性材料 第10部分:磁性鋼片和鋼帶在中頻下的磁性能的測量方法 | Magnetic materials; part 10: methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies |
| IEC 60404-13-1995 | 磁性材料 第13部分:電工鋼片和鋼帶的密度、電阻率和疊層因數的測量方法 | Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip |
| IEC 60404-14-2002 | 磁性材料.第14部分:用拔出或旋轉法對鐵磁材料試樣的磁偶極矩的測量方法 | Magnetic materials - Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method |
| IEC 60404-4 AMD 1-2000 | 磁性材料 第4部分:磁性軟材料直流磁性能的測量方法 修改1 | Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials; Amendment 1 |
| IEC 60404-4 AMD 2-2008 | 磁性材料.第4部分:軟磁材料的直流磁性的測量方法.修改件2 | Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetially soft materials; Amendment 2 |
| IEC 60404-4-1995 | 磁性材料.第4部分:鐵和鋼直流磁特性測量方法 | Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of iron and steel |
| IEC 60404-5 AMD 1-2007 | 磁性材料.第5部分:永久磁鐵(硬磁)材料.磁性能測量方法.修改件1 | Magnetic materials - Part 5: Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties; Amendment 1 |
| IEC 60404-5-1993 | 磁性材料 第5部分:永磁(硬磁)材料 磁性能的測量方法 | Magnetic materials; part 5: permanent magnet (magnetically hard) materials; methods of measurement of magnetic properties |
| IEC 60404-6 Corrigendum 1-2009 | 磁性材料.第6部分:通過環形試樣的使用對頻率范圍在20Hz～200kHz的軟磁金屬和粉末材料磁性的測量方法 | Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens; Corrigendum 1 |
| IEC 60404-6-2003 | 磁性材料.第6部分:使用環形試樣的頻率范圍在20至200kHz的軟磁金屬材料和粉末材料磁性能的測量方法 | Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens |
| IEC 60404-7-1982 | 磁性材料 第7部分:開磁路中磁性材料矯頑力的測量方法 | Magnetic materials. Part 7 : Method of measurement of the coercivity of magnetic materials in an open magnetic circuit |
| IEC 60441-1974 | 陰極射線管熒光屏發光的光度和色度測量方法 | Photometric and colorimetric methods of measurement of the light emitted by a cathode-ray tube screen |
| IEC 60442 AMD 1-2003 | 家用和類似用途的電烤箱.性能的測量方法.修改件1 | Electric toasters for household and similar purposes - Methods for measuring the performance; Amendment 1 |
| IEC 60442 Edition 2.1-2003 | 家用和類似用途的電烤箱.性能的測量方法 | Electric toasters for household and similar purposes - Methods for measuring the performance |
| IEC 60444-4-1988 | 用π型網絡的零相位技術測量石英諧振器參數.第4部分:石英晶體元件負荷諧振頻率fl、負荷諧振電阻Rl的測量方 | Measurement of quartz crystal unit parameters by zero phase technique in a -network; part 4: method for the measurement of the load resonance frequency FL load resonance resistance RL and the calculation of other derived values of quartz crystal units, up to 30 MHz |
| IEC 60457-1-1974 | 剛性精密同軸線及其相關的精密連接器 第1部分:一般要求和測量方法 | Rigid precision coaxial lines and their associated precision connectors. Part 1 : General requirements and measuring methods |
| IEC 60468-1974 | 金屬材料電阻率測量方法 | Method of measurement of resistivity of metallic materials |
| IEC 60487-1-1984 | 地面無線電中繼系統所用設備的測量方法 第1部分:分系統和模擬無線電中繼系統通用測量方法 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 1 : Measurements common to sub-systems and simulated radio-relay systems |
| IEC 60487-2-1-1981 | 地面無線電中繼系統所用設備的測量方法 第2部分:分系統測量 第1節:總則 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 : Measurements for sub-systems. Section One - General |
| IEC 60487-2-2-1981 | 地面無線電中繼系統所用設備的測量方法 第2部分:分系統測量 第2節:備用信道轉換設備 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 : Measurements for sub-systems. Section Two - Stand-by channel switching equipment |
| IEC 60487-2-3-1984 | 地面無線電中繼系統所用設備的測量方法 第2部分:分系統測量 第3節:射頻分支網絡 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 : Measurements for sub-systems. Section Three - R.F. branching networks |
| IEC 60487-2-4-1984 | 地面無線電中繼系統所用設備的測量方法 第2部分:分系統測量 第4節:頻率調制器 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 : Measurements for sub-systems. Section Four - Frequency modulators |
| IEC 60487-2-5-1984 | 地面無線電中繼系統所用設備的測量方法 第2部分:分系統測量 第5節:頻率調制器 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 : Measurements for sub-systems. Section Five - Frequency demodulators |
| IEC 60487-2-6-1984 | 地面無線電中繼系統所用設備的測量方法 第2部分:分系統測量 第6節:分集、雙路和熱備用設備 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 : Measurements for sub-systems. Section Six - Diversity, twin-path and hot stand-by equipment |
| IEC 60487-2-7-1986 | 地面無線電中繼系統所用設備的測量方法 第2部分:分系統測量 第7節:無線電發射機 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 : Measurements for sub-systems. Section Seven - Radio transmitters |
| IEC 60487-2-8-1986 | 地面無線電中繼系統所用設備的測量方法 第2部分:分系統測量 第8節:無線電接收機 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 : Measurements for sub-systems. Section Eight - Radio receivers |
| IEC 60487-3-1975 | 地面無線電中繼系統所用設備的測量方法 第3部分:模擬系統 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 3 : Simulated systems |
| IEC 60487-3-2-1981 | 地面無線電中繼系統所用設備的測量方法 第3部分:模擬系統 第2節:基帶測量 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 3 : Simulated systems. Section Two - Measurements in the baseband |
| IEC 60487-3-3-1981 | 地面無線電中繼系統所用設備的測量方法 第3部分:模擬系統 第3節:黑白和彩色電視傳輸?shù)臏y(cè)量 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 3 : Simulated systems. Section Three - Measurements for monochrome and colour television transmission |
| IEC 60487-3-4-1982 | 地面無線電中繼系統所用設備的測量方法 第3部分:模擬系統 第4節:頻分多路傳輸?shù)臏y(cè)量 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 3 : Simulated systems. Section Four - Measurements for f.d.m. transmission |
| IEC 60487-3-5-1982 | 地面無線電中繼系統所用設備的測量方法 第3部分:模擬系統 第5節:互干擾測量 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 3 : Simulated systems. Section Five - Measurement of mutual interference |
| IEC 60487-3-6-1984 | 地面無線電中繼系統所用設備的測量方法 第3部分:模擬系統 第6節:聲音節目傳輸測量 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 3 : Simulated systems. Section Six - Measurements for sound-programme transmission |
| IEC 60489-1 AMD 1-1996 | 移動業務中用的無線電設備的測量方法 第1部分:通用定義和測量的標準條件 修改1 | Methods of measurement for radio equipment used in the mobile services - Part 1: General definitions and standard conditions of measurement; Amendment 1 |
| IEC 60489-1 AMD 2-1999 | 移動業務中用的無線電設備的測量方法 第1部分:通用定義和測量的標準條件 修改2 | Methods of measurement for radio equipment used in the mobile services - Part 1: General definitions and standard conditions of measurement; Amendment 2 |
| IEC 60489-1-1983 | 移動業務中用的無線電設備的測量方法 第1部分:通用定義和測量的標準條件 | Methods of measurement for radio equipment used in the mobile services. Part 1 : General definitions and standard conditions of measurement |
| IEC 60489-2 AMD 1-1999 | 移動業務中用的無線電設備的測量方法 第2部分:采用A3E、F3E或G3E發射的發射機 修改1 | Methods of measurement for radio equipment used in the mobile services - Part 2: Transmitters employing A3E, F3E or G3E emissions; Amendment 1 |
| IEC 60489-2-1991 | 移動業務中用的無線電設備的測量方法 第2部分:采用A3E、F3E或G3E發射的發射機 | Methods of measurement for radio equipment used in the mobile services; part 2: transmitters employing A3E, F3E or G3E emissions |
| IEC 60489-3 AMD 1-1999 | 移動業務中用的無線電設備的測量方法 第3部分:對A3E或F3E發射的接收機 修改1 | Methods of measurement for radio equipment used in the mobile services - Part 3: Receivers employing A3E, F3E or G3E emissions; Amendment 1 |
| IEC 60489-3-1988 | 移動業務中用的無線電設備的測量方法 第3部分:對A3E或F3E發射的接收機 | Methods of measurement for radio equipment used in the mobile services; part 3: receivers for A3E or F3E emissions |
| IEC 60489-4-1991 | 移動業務中用的無線電設備的測量方法 第4部分:采用單邊帶發射(R3E、H3E或J3E)的發射機 | Methods of measurement for radio equipment used in the mobile services; part 4: transmitters employing single-sideband emissions (R3E, H3E or J3E) |
| IEC 60489-5-1987 | 移動業務中用的無線電設備的測量方法 第5部分:采用單邊帶技術(R3E、H3E或J3E)的接收機 | Methods of measurement for radio equipment used in the mobile services; part 5: receivers employing single-sideband techniques (R3E, H3E or J3E) |
| IEC 60489-6-1999 | 移動業務中用的無線電設備的測量方法 第6部分:數據設備 | Radio equipment used in mobile services - Methods of measurement - Part 6: Data equipment |
| IEC 60489-8 AMD 1-2000 | 移動業務中用的無線電設備的測量方法 第8部分:修改1:天線及輔助設備的測量方法 | Methods of measurement for radio equipment used in the mobile services - Part 8: Methods of measurement for antennas and ancillary equipment; Amendment 1 |
| IEC 60489-8-1984 | 移動業務中用的無線電設備的測量方法 第8部分:天線 | Methods of measurement for radio equipment used in the mobile services. Part 8 : Methods of measurement for antennas |
| IEC 60510-1-1975 | 衛星地面站用無線電設備的測量方法 第1部分:總則 | Methods of measurement for radio equipment used in satellite earth stations.. Part 1 : General |
| IEC 60510-1-2-1984 | 衛星地面站用無線電設備的測量方法 第1部分:分系統和分系統組合通用的測量 第2節:射頻范圍內的測量 | Methods of measurement for radio equipment used in satellite earth stations.. Part 1 : Measurements common to sub-systems and combinations of sub-systems.. Section Two - Measurements in the r.f. range |
| IEC 60510-1-3 AMD 1-1988 | 衛星地面站用無線電設備的測量方法 第1部分:分系統和分系統組合通用的測量 第3節:中頻范圍內的測量 修改1 | Methods of measurement for radio equipment used in satellite earth stations; part 1: measurements common to sub-systems and combinations of sub-systems; section three: measurements in the i.f. range; amendment No. 1 to publication 60510-1-3 (1980) |
| IEC 60510-1-3-1980 | 衛星地面站用無線電設備的測量方法 第1部分:分系統和分系統組合通用的測量 第3節:中頻范圍內的測量 | Methods of measurement for radio equipment used in satellite earth stations.. Part 1 : Measurements common to sub-systems and combinations of sub-systems.. Section Three - Measurements in the i.f. range |
| IEC 60510-1-4-1986 | 衛星地面站用無線電設備的測量方法 第1部分:分系統和分系統組合通用的測量 第4節:基帶的測量 | Methods of measurement for radio equipment used in satellite earth stations.. Part 1 : Measurements common to sub-systems and combinations of sub-systems.. Section Four - Measurement in the baseband |
| IEC 60510-1-5-1988 | 衛星地面站用無線電設備的測量方法 第1部分:分系統和分系統組合通用的測量 第5節:噪聲溫度測量 | Methods of measurement for radio equipment used in satellite earth stations. Part 1: Measurements common to sub-systems and combinations of sub-systems. Section Five: Noise temperature measurements |
| IEC 60510-1A-1980 | 衛星地面站用無線電設備的測量方法 第1部分:分系統和分系統組合通用的測量 補充1:6.2條:直流電源條件 | Methods of measurement for radio equipment used in satellite earth stations.. Part 1 : Measurements common to sub-systems and combinations of sub-systems.. First supplement: Sub-clause 6.2: D.C. source conditions |
| IEC 60510-2-1 AMD 1-1989 | 衛星地面站用無線電設備的測量方法 第2部分:分系統測量 第1節:總則 第2節:天線(包括饋線網絡) 修改1 | Methods of measurement for radio equipment used in satellite earth stations; part 2: measurements for sub-systems; section one: general; section two: antenna (including feed network); amendment No. 1 to IEC 60510-2-1:1976 |
| IEC 60510-2-1-1978 | 衛星地面站用無線電設備的測量方法 第2部分:分系統測量 第1節:總則 第2節:天線(包括饋線網絡) | Methods of measurement for radio equipment used in satellite earth stations.. Part 2 : Measurements for sub-system. Section One - General. Section Two - Antenna (including network) |
| IEC 60510-2-3-1989 | 衛星地面站用無線電設備的測量方法 第2部分:分系統測量 第3節:低噪聲放大器 | Methods of measurement for radio equipment used in satellite earth stations; part 2: measurements for sub-systems; section three: low-noise amplifier |
| IEC 60510-2-4-1988 | 衛星地面站用無線電設備的測量方法 第2部分:分系統測量 第4節:上、下變頻器 | Methods of measurement for radio equipment used in satellite earth stations; part 2: measurements for sub-systems; section four: up- and down-converters |
| IEC 60510-2-5-1992 | 衛星地面站用無線電設備的測量方法 第2部分:分系統測量 第5節:頻率調制器 | Methods of measurement for radio equipment used in satellite earth stations; part 2: measurement for sub-systems; section 5: frequency modulators |
| IEC 60510-2-6-1992 | 衛星地面站用無線電設備的測量方法 第2部分:分系統測量 第6節:頻率解調器 | Methods of measurement for radio equipment used in satellite earth stations; part 2: measurement for sub-systems; section 6: frequency demodulators |
| IEC 60510-2-7-1989 | 衛星地面站用無線電設備的測量方法 第2部分:分系統測量 第7節:大功率放大器 | Methods of measurement for radio equipment used in satellite earth stations; part 2: measurements for sub-systems; section seven, high-power amplifier |
| IEC 60510-3-1-1981 | 衛星地面站用無線電設備的測量方法 第3部分:分系統組合測量方法 第1節:總則 | Methods of measurement for radio equipment used in satellite earth stations. Part 3 : Methods of measurement for combinations of sub-systems. Section One - General |
| IEC 60510-3-2-1980 | 衛星地面站用無線電設備的測量方法 第3部分:分系統組合測量方法 第2節:頻率范圍為4GHz～6GHz的接收系統品質 | Methods of measurement for radio equipment used in satellite earth stations. Part 3: Methods of measurement on combinations of sub-systems. Section Two: Measurement of the figure of merit (G/T) of the receiving system in the 4 GHz to 6 GHz range |
| IEC 60510-3-3-1988 | 衛星地面站用無線電設備的測量方法 第3部分:分系統組合測量方法 第3節:黑白電視和彩色電視傳輸?shù)臏y(cè)量 | Methods of measurement for radio equipment used in satellite earth stations; part 3: methods of measurement for combination of sub-systems; section three; measurements for monochrome and colour television transmission |
| IEC 60510-3-4-1992 | 衛星地面站用無線電設備的測量方法 第3部分:分系統組合測量方法 第4節:頻分多路傳輸?shù)臏y(cè)量 | Methods of measurement for radio equipment used in satellite earth stations; part 3: methods of measurement on combinations of sub-systems; section 4: measurements for frequency division multiplex (f.d.m) transmission |
| IEC 60512-1-3-1997 | 電子設備用機電元件 基本試驗程序和測量方法 第1部分:一般檢查 第3節:試驗1c:電氣嚙合長度 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination - Section 3: Test 1c - Electrical engagement length |
| IEC 60512-1-4 Corrigendum 1-2000 | 電子設備用機電元件.基本測試程序和測量方法.第1部分:總則.第4節:試驗1d:觸點防護效果(防碰擦) | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof) |
| IEC 60512-1-4-1997 | 電子設備用機電元件 基本試驗程序和測量方法 第1部分:總則 第4節:試驗1d:接觸件保護效率(防鏟) | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof) |
| IEC 60512-10-4-2003 | 電子設備用連接件.試驗和測量方法.第10-4部分:撞擊試驗(自由元件)、靜負荷試驗(固定元件)、壽命試驗和過負 | Connectors for electronic equipment - Tests and measurements - Part 10-4: Impact tests (free components), static load tests (fixed components), endurance test and overload tests; Test 10d: Electrical overload (connectors) |
| IEC 60512-11-1-1995 | 電子設備用機電元件 基本試驗程序和測量方法 第11部分:氣候試驗 第1節:試驗11a:氣候順序 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a: Climatic sequence |
| IEC 60512-11-7-2003 | 電子設備用連接器.試驗和測量方法.第11-7部分:氣候試驗.試驗11g:流動混合氣體腐蝕試驗 | Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests; Test 11g: Flowing mixed gas corrosion test |
| IEC 60512-11-8-1995 | 電子設備用機電元件 基本試驗程序和測量方法 第11部分:氣候試驗 第8節:試驗11h:砂塵 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 8: Test 11h: Sand and dust |
| IEC 60512-12-6-1996 | 電子設備用機電元件 基本試驗程序和測量方法 第12部分:錫焊試驗 第6節:試驗12f:機焊密封處耐焊劑和清潔溶劑 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering |
| IEC 60512-14-7-1997 | 電子設備用機電元件 基本試驗程序和測量方法 第14部分:密封性試驗 第7節:試驗14g:沖水試驗 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests - Section 7: Test 14g: Impacting water |
| IEC 60512-15-8-1995 | 電子設備用機電元件 基本試驗程序和測量方法 第15部分:接觸件及引出端機械試驗 第8節:試驗15h:接觸件固定機 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations - Section 8: Test 15h: Contact retention system resistance to tool application |
| IEC 60512-16-20-1996 | 電子設備用機電元件 基本試驗程序和測量方法 第16部分:接觸件及引出端的機械試驗 第20節:試驗16t:機械強度( | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20: Test 16t: Mechanical strength (wired termination of solderless connections) |
| IEC 60512-19-3-1997 | 電子設備用機電元件 基本試驗程序和測量方法 第19部分:耐化學品試驗 第3節:試驗19c:耐焊劑 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests - Section 3: Test 19c: Fluid resistance |
| IEC 60512-20-2-2000 | 電子設備用機電元件-基本試驗程序和測量方法 第20-2部分:試驗20b:易燃性試驗 防火性 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test 20b - Flammability tests - Fireproofness |
| IEC 60512-23-3 Corrigendum 1-2003 | 電子設備用電機元件.基本測試程序和測量方法.第23-3部分:試驗23c:連接器和附件的屏蔽效果 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories |
| IEC 60512-23-3-2000 | 電子設備用電機元件.基本試驗程序和測量方法.第23-3部分:試驗23c.連接件和附屬件的屏蔽效應 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories |
| IEC 60512-26-100-2008 | 電子設備用連接器.試驗和測量.第26-100部分:根據IEC 60603-7連接器用測量裝置、試驗和參考順序和測量方法. | Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g |
| IEC 60512-5-1992 | 電子設備用機電元件.基本試驗規程和測量方法.第5部分:沖擊試驗(不固定元件).靜載試驗(固定元件).壽命試驗和 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods; part 5: impact tests (free components), static load tests (fixed components), endurance tests and overload tests |
| IEC 60512-6-1984 | 電子設備用機電元件.基本試驗規程和測量方法.第6部分:氣候試驗和錫焊試驗 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 6 : Climatic tests and soldering tests |
| IEC 60512-6-5-1997 | 電子設備用機電元件 基本試驗程序和測量方法 第6部分:動態應力試驗 第5節:試驗6e:隨機振動 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6: Dynamic stress tests - Section 5: Test 6e: Random vibration |
| IEC 60512-9-1992 | 電子設備用機電元件 基本試驗程序和測量方法 第9部分:雜項試驗 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods; part 9: miscellaneous tests |
| IEC 60556-2006 | 用于微波頻率的旋磁材料.性能的測量方法 | Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties |
| IEC 60661 AMD 1-2003 | 家用電咖啡壺性能的測量方法.修改件1 | Methods for measuring the performance of electric household coffee makers; Amendment 1 |
| IEC 60661 AMD 2-2005 | 家用電咖啡壺的性能測量方法.修改件2 | Methods for measuring the performance of electric household coffee makers; Amendment 2 |
| IEC 60675 Edition 2.1-1998 | 家用電直接式房間加熱器.性能測量方法 | Household electric direct-acting room heaters - Methods for measuring performance |
| IEC 60675-1994 | 家用房間電暖爐性能的測量方法 | Household electric direct-acting room heaters - Methods for measuring performance |
| IEC 60682 AMD 1-1987 | 石英鹵鎢燈夾封部位溫度的標準測量方法 修改1 | Standard method of measuring the pinch temperature of quartz-tungstenhalogen lamps |
| IEC 60682 AMD 2-1997 | 石英鹵鎢燈夾封部位溫度的標準測量方法 修改2 | Method of measuring the pinch temperature of quartz glass lamps; Amendment 2 |
| IEC 60682-1980 | 石英鹵鎢燈夾封部位溫度的標準測量方法 | Standard method of measuring the pinch temperature of quartz-tungstenhalogen lamps |
| IEC 60705 AMD 1-2004 | 家用微波爐.性能測量方法.修改件1 | Household microwave ovens - Methods for measuring performance; Amendment 1 |
| IEC 60705 AMD 2-2006 | 家用微波爐.性能測量方法.修改件2 | Household microwave ovens - Methods for measuring performance; Amendment 2 |
| IEC 60705 Edition 3.1-2004 | 家用微波爐.性能測量方法 | Household microwave ovens - Methods for measuring performance |
| IEC 60732-1982 | 磁性氧化物圓柱形、管形和螺紋磁芯的測量方法 | Measuring methods for cylinder cores, tube cores and screw cores of magnetic oxides |
| IEC 60735-1991 | 錄像帶性能的測量方法 | Measuring methods for video tape properties |
| IEC 60747-5-3 Edition 1.1-2009 | 分立半導體器件及集成電路.第5-3部分:光電元件.測量方法 | Discrete semiconductor devices and integrated circuits - Part 5-3: Optoelectronic devices - Measuring methods |
| IEC 60793-1-1-2008 | 光纖.第1-1部分:測量方法和試驗程序.總則和指南 | Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance |
| IEC 60793-1-20-2001 | 光纖 第1-20部分：測量方法和試驗規程 纖維幾何結構 | Optical fibres - Part 1-20: Measurement methods and test procedures; Fibre geometry |
| IEC 60793-1-21-2001 | 光纖 第1-21部分：測量方法和試驗規程 被覆層幾何結構 | Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry |
| IEC 60793-1-22-2001 | 光纖 第1-22部分：測量方法和試驗規程 長度測量 | Optical fibres - Part 1-22: Measurement methods and test procedures - Length measurement |
| IEC 60793-1-30-2001 | 光纖 第1-30部分：測量方法和試驗規程 纖維驗證試驗 | Optical fibres - Part 1-30: Measurement methods and test procedures; Fibre proof test |
| IEC 60793-1-31-2001 | 光纖 第1-31部分：測量方法和試驗規程 抗拉強度 | Optical fibres - Part 1-31: Measurement methods and test procedures; Tensile strength |
| IEC 60793-1-32-2001 | 光纖 第1-32部分：測量方法和試驗規程 被覆層可剝性 | Optical fibres - Part 1-32: Measurement methods and test procedures; Coating strippability |
| IEC 60793-1-33-2001 | 光纖 第1-33部分：測量方法和試驗規程 應力腐蝕敏感度 | Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility |
| IEC 60793-1-34-2006 | 光學纖維.第1-34:部分:測量方法和試驗程序.纖維卷曲 | Optical fibres - Part 1-34: Measurement methods and test procedures - Fibre curl |
| IEC 60793-1-40-2001 | 光纖 第1-40部分：測量方法和試驗規程 衰減 | Optical fibres - Part 1-40: Measurement methods and test procedures; Attenuation |
| IEC 60793-1-41-2003 | 光學纖維.第1-41部分:測量方法和試驗程序.頻帶寬度 | Optical fibres - Part 1-41: Measurement methods and test procedures; Bandwidth |
| IEC 60793-1-42-2007 | 光纖.第1-42部分:測量方法和試驗程序.色散 | Optical fibres - Part 1-42: Measurement methods and test procedures - Chromatic dispersion |
| IEC 60793-1-43-2001 | 光纖 第1-43部分：測量方法和試驗規程 數值孔徑 | Optical fibres - Part 1-43: Measurement methods and test procedures; Numerical aperture |
| IEC 60793-1-44-2001 | 光纖 第1-44部分：測量方法和試驗規程 截止波長 | Optical fibres - Part 1-44: Measurement methods and test procedures; Cut-off wavelength |
| IEC 60793-1-45 Corrigendum 1-2002 | 光纖.第1-45部分:測量方法和試驗規程.模場直徑 | Optical fibres - Part 1-45: Measurement methods and test procedures; Mode field diameter |
| IEC 60793-1-45-2001 | 光纖 第1-45部分：測量方法和試驗規程 模場直徑 | Optical fibres - Part 1-45: Measurement methods and test procedures; Mode field diameter |
| IEC 60793-1-46-2001 | 光纖 第1-46部分：測量方法和試驗規程 光透射比變化的監測 | Optical fibres - Part 1-46: Measurement methods and test procedures; Monitoring of changes in optical transmittance |
| IEC 60793-1-47-2009 | 光纖.第1-47部分:測量方法和試驗程序.撓度損耗 | Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss |
| IEC 60793-1-48-2007 | 光纖.第1-48部分:測量方法和試驗程序.偏振模色散 | Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion |
| IEC 60793-1-49-2006 | 光學纖維.第1-49部分:測量方法和試驗程序.差分模延遲 | Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay |
| IEC 60793-1-50-2001 | 光纖 第1-50部分：測量方法和試驗規程 濕熱（穩態） | Optical fibres - Part 1-50: Measurement methods and test procedures; Damp heat (steady state) |
| IEC 60793-1-51-2001 | 光纖 第1-51部分：測量方法和試驗規程 干熱 | Optical fibres - Part 1-51: Measurement methods and test procedures; Dry heat |
| IEC 60793-1-52-2001 | 光纖 第1-52部分：測量方法和試驗規程 溫度變化 | Optical fibres - Part 1-52: Measurement methods and test procedures; Change of temperature |
| IEC 60793-1-53-2001 | 光纖 第1-53部分：測量方法和試驗規程 浸水 | Optical fibres - Part 1-53: Measurement methods and test procedures; Water immersion |
| IEC 60793-1-54-2003 | 光學纖維.第1-54部分:測量方法和試驗規程.Υ幅射 | Optical fibres - Part 1-54: Measurement methods and test procedures; Gamma irradiation |
| IEC 60835-1-1-1990 | 數字微波無線電傳輸系統使用設備的測量方法 第1部分:地面無線電中繼系統和衛星地面站通用的測量 第1節:總則 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 1: measurements common to terrestrial radio-relay systems and satellite earth stations; section one: general |
| IEC 60835-1-2 AMD 1-1995 | 數字微波無線電傳輸系統使用設備的測量方法 第1部分:地面無線電中繼系統和衛星地面站通用的測量 第2節:基本 | Methods of measurement for equipment used in digital microwave transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 2: Basic characteristics; Amendment 1 |
| IEC 60835-1-2-1992 | 數字微波無線電傳輸系統使用設備的測量方法 第1部分:地面無線電中繼系統和衛星地面站通用的測量 第2節:基本 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 1: measurements common to terrestrial radio-relay systems and satellite earth stations; section 2: basic characteristics |
| IEC 60835-1-3 AMD 1-1995 | 數字微波無線電傳榆系統使用設備的測量方法 第1部分:地面無線電中繼系統和衛星地面站通用的測量 第3節:傳輸 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 3: Transmission characteristics; Amendment 1 |
| IEC 60835-1-3-1992 | 數字微波無線電傳輸系統使用設備的測量方法 第1部分:地面無線電中繼系統和衛星地面站通用的測量 第3節:傳輸 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 1: measurements common to terrestrial radio-relay systems and satellite earth stations; section 3: transmission characteristics |
| IEC 60835-1-4 AMD 1-1995 | 數字微波無線電傳輸系統使用設備的測量方法 第1部分:地面無線電中繼系統和衛星地面站通用的測量 第4節:傳輸 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 4: Transmission performance; Amendment 1 |
| IEC 60835-1-4-1992 | 數字微波無線電傳輸系統使用設備的測量方法 第1部分:地面無線電中繼系統和衛星地面站通用的測量 第4節:傳輸 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 1: measurements common to terrestrial radio-relay systems and satellite earth stations; section 4: transmission performance |
| IEC 60835-2-1-1990 | 數字微波無線電傳輸系統使用設備的測量方法 第2部分:地面無線電中繼系統的測量 第1節:總則 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 2: measurements on terrestrial radio-relay systems; section one: general |
| IEC 60835-2-10-1992 | 數字微波無線電傳輸系統使用設備的測量方法 第2部分:地面無線電中繼系統的測量 第10節:系統總性能 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 2: measurements on terrestrial radio-relay systems; section 10: overall system performance |
| IEC 60835-2-11-1996 | 數字微波無線電傳輸系統使用設備的測量方法 第2部分:地面無線電中繼系統的測量 第11節:交叉極化干擾消除器 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 11: Cross-polarization interference canceller |
| IEC 60835-2-2-1994 | 數字微波無線電傳輸系統使用設備的測量方法 第2部分:地面無線電中繼系統的測量 第2節:天線 | Methods of measurement for equipment used in digital microwave transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 2: Antenna |
| IEC 60835-2-3-1992 | 數字微波無線電傳輸系統使用設備的測量方法 第2部分:地面無線電中繼系統的測量 第3節:RF分支網絡 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 2: measurements on terrestrial radio-relay systems; section 3: RF branching networks |
| IEC 60835-2-4 AMD 1-1997 | 數字微波無線電傳輸系統使用設備的測量方法 第2部分:地面無線電中繼系統的測量 第4節:發射機/接收機包括調 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 4: Transmitter/receiver including modulator/demodulator; Amendment 1 |
| IEC 60835-2-4 Edition 1.1-1998 | 數字微波無線電傳輸系統使用設備的測量方法.第2-4部分:地面無線電中繼系統的測量.包括調制器/解調器的發射 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2-4: Measurements on terrestrial radio-relay systems; Transmitter/receiver including modulator/demodulator |
| IEC 60835-2-4-1993 | 數字微波無線電傳輸系統使用設備的測量方法 第2部分:地面無線電中繼系統的測量 第4節:發射機/接收機包括調 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 2: measurements on terrestrial radio-relay systems; section 4: transmitter/receiver including modulator/demodulator |
| IEC 60835-2-5-1993 | 數字微波無線電傳輸系統使用設備的測量方法 第2部分:地面無線電中繼系統的測量 第5節:數字信號處理子系統 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 2: measurements on terrestrial radio-relay systems; section 5: digital signal processing sub-system |
| IEC 60835-2-6-1995 | 數字微波無線電傳輸系統使用設備的測量方法 第2部分:地面無線電中繼系統的測量 第6節:保護開關 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 6: Protection switching |
| IEC 60835-2-7-1994 | 數字微波無線電傳輸系統使用設備的測量方法 第2部分:地面無線電中繼系統的測量 第7節:分集轉換和聯合設備 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 7: Diversity switching and combining equipment |
| IEC 60835-2-8 AMD 1-1996 | 數字微波無線電傳輸系統使用設備的測量方法 第2部分:地面無線電中繼系統的測量 第8節:自適應均衡器 修改1 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 8: Adaptive equalizer; Amendment 1 |
| IEC 60835-2-8-1993 | 數字微波無線電傳輸系統使用設備的測量方法 第2部分:地面無線電中繼系統的測量 第8節:自適應均衡器 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 2: measurements on terrestrial radio-relay systems; section 8: adaptive equalizer |
| IEC 60835-2-9-1995 | 數字微波無線電傳輸系統使用設備的測量方法 第2部分:地面無線電中繼系統的測量 第9節:業務信道 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 9: Service channels |
| IEC 60835-3-1-1990 | 數字微波無線電傳輸系統使用設備的測量方法 第3部分:衛星地面站的測量 第1節:總則 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 3: measurements on satellite earth stations; section one: general |
| IEC 60835-3-10-1994 | 數字微波無線電傳輸系統使用設備的測量方法 第3部分:衛星地面站的測量 第10節:終端設備-TDMA地面站話務量 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 10: Terminal equipment - TDMA traffic earth station |
| IEC 60835-3-11-1995 | 數字微波無線電傳輸系統使用設備的測量方法 第3部分:衛星地面站的測量 第11節:SCPC-PSK傳輸業務信道設備 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 11: Service channel equipment for SCPC-PSK transmission |
| IEC 60835-3-12-1993 | 數字微波無線電傳輸系統使用設備的測量方法 第3部分:衛星地面站的測量 第12節:系統總性能 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 3: measurements on satellite earth stations; section 12: overall system performance |
| IEC 60835-3-13-1996 | 數字微波無線電傳輸系統使用設備的測量方法 第3部分:衛星地面站的測量 第13節:VSAT系統 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 13: VSAT systems |
| IEC 60835-3-14-1996 | 數字微波無線電傳輸系統使用設備的測量方法 第3部分:衛星地面站的測量 第14節:衛星新聞收集用地面站(SNG) | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 14: Earth stations for satellite news gathering (SNG) |
| IEC 60835-3-2-1995 | 數字微波無線電傳輸系統使用設備的測量方法 第3部分:衛星地面站的測量 第2節:天線 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 2: Antenna |
| IEC 60835-3-4-1993 | 數字微波無線電傳輸系統使用設備的測量方法 第3部分:衛星地面站的測量 第4節:低噪聲放大器 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 3: measurements on satellite earth stations; section 4: low noise amplifier |
| IEC 60835-3-5-1994 | 數字微波無線電傳輸系統使用設備的測量方法 第3部分:衛星地面站的測量 第5節:上、下變頻器 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurement on satellite earth stations - Section 5: Up- and down-converters |
| IEC 60835-3-6-1996 | 數字微波無線電傳輸系統使用設備的測量方法 第3部分:衛星地面站的測量 第6節:大功率放大器 | Methods of measurement for equipment used in digital microwave transmission systems - Part 3: Measurements on satellite earth stations - Section 6: High-power amplifiers |
| IEC 60835-3-7-1995 | 數字微波無線電傳輸系統使用設備的測量方法 第3部分:衛星地面站的測量 第7節:接收系統的品質因數 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 7: Figure-of-merit of receiving system |
| IEC 60835-3-9-1993 | 數字微波無線電傳輸系統使用設備的測量方法 第3部分:衛星地面站的測量 第9節:SCP-PSK終端設備 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 3: measurements on satellite earth stations; section 9: terminal equipment SCP-PSK |
| IEC 60883-1987 | 磁帶錄像機的色度信號與隨機噪聲之比的測量方法 | Measuring method for chrominance signal-to-random noise ratio for video tape recorders |
| IEC 60904-10-2009 | 光伏器件.第10部分:線性測量方法 | Photovoltaic devices - Part 10: Methods of linearity measurement |
| IEC 60911-1987 | 監測加壓輕水反應堆堆芯充分冷卻的測量方法 | Measurements for monitoring adequate cooling within the core of pressurized light water reactors |
| IEC 60990-1999 | 接觸電流和保護導體電流的測量方法 | Methods of measurement of touch current and protective conductor current |
| IEC 61000-4-10 Edition 1.1-2001 | 電磁兼容性.第4-10部分:試驗和測量方法.阻尼振動磁場抗擾試驗 | Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques; Damped oscillatory magnetic field immunity test |
| IEC 61000-4-15 AMD 1-2003 | 電磁兼容性.第4-15部分:試驗和測量方法.閃爍計功能和設計規范.修改1 | Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques; Flickermeter; Functional and design specifications; Amendment 1 |
| IEC 61000-4-15 Edition 1.1-2003 | 電磁兼容性.第4部分:試驗和測量方法.第15節:閃爍計.功能和設計規范 | Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques; Section 15: Flickermeter; Functional and design specifications |
| IEC 61000-4-20 AMD 1-2006 | 電磁兼容性(EMC).第4-20部分:試驗和測量方法.橫向電磁波導的輻射和干擾試驗.修改件1 | Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides; Amendment 1 |
| IEC 61000-4-20 Edition 1.1-2007 | 電磁兼容性(EMC).第4-20部分:試驗和測量方法.橫向電磁(TEM)波導的輻射和干擾試驗 | Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
| IEC 61000-4-20-2003 | 電磁兼容性.第4-20部分:試驗和測量方法.橫向電磁波導輻射和干擾試驗 | Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques; Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
| IEC 61000-4-30-2008 | 電磁兼容性(EMC).測試和測量技術.電能質量測量方法 | Electromagnetic compatibility (EMC) - Testing and measurement techniques - Power quality measurement methods |
| IEC 61000-4-33-2005 | 電磁兼容性(EMC).第4-33部分:試驗和測量技術.高壓瞬態參數的測量方法 | Electromagnetic compatibility (EMC) - Part 4-33: Testing and measurement techniques - Measurement methods for high-power transient parameters |
| IEC 61000-4-9 Edition 1.1-2001 | 電磁兼容性.第4-9部分:試驗和測量方法.脈沖磁場抗擾試驗 | Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques; Pulse magnetic field immunity test |
| IEC 61007-1994 | 電子和通信設備用變壓器和電感器 測量方法和試驗程序 | Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures |
| IEC 61041-1-1990 | 非廣播用錄像機 測量方法 第1部分:通用視頻(NTSC/PAL)和聲頻(縱向)特性 | Non-broadcast video tape recorders; methods of measurement; part 1: general video (NTSC/PAL) and audio (longitudinal) characteristics |
| IEC 61041-2-1994 | 非廣播用錄像機 測量方法 第2部分:SECAM 錄像機色度特性 | Non-broadcast video tape recorders - Methods of measurement - Part 2: Video characteristics chrominance SECAM |
| IEC 61041-3-1993 | 非廣播用錄像機 測量方法 第3部分:用FM信號錄音的聲頻特性 | Non-broadcast videotape recorders; methods of measurement; part 3: audio characteristics for FM recording |
| IEC 61041-4-1997 | 非廣播用錄像機 測量方法 第4部分:校準帶(NTSC/PAL/SECAM) | Non-broadcast video tape recorders - Methods of measurement - Part 4: Calibration tape (NTSC/PAL/SECAM) |
| IEC 61041-5-1997 | 非廣播用錄像機 測量方法 第5部分:高頻磁帶錄像機,其中包括那些裝配有Y/C圖像連接器(NTSC/PAL)的高頻磁帶錄 | Non-broadcast video tape recorders - Methods of measurement - Part 5: High-band video tape recorders, including those equipped with Y/C video connectors (NTSC/PAL) |
| IEC 61079-1-1992 | 12GHz頻帶衛星廣播傳輸接收機的測量方法 第1部分:露天設備的射頻測量 | Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band; part 1: radio-frequency neasurements on outdoor units |
| IEC 61079-2-1992 | 12GHz頻帶衛星廣播傳輸接收機的測量方法 第2部分:DBS調諧設備的電氣測量 | Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band; part 2: electrical measurements on DBS tuner units |
| IEC 61079-3-1993 | 12GHz頻帶衛星廣播傳輸接收機的測量方法 第3部分:包括戶外裝置和DBS調諧裝置的接收系統的總性能的電氣測量 | Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band; part 3: electrical measurements of overall performance of receiver systems comprising an outdoor unit and a DBS tuner unit |
| IEC 61079-4-1993 | 12GHz頻帶衛星廣播傳輸接收機的測量方法 第4部分:NTSC制式數字副載波系統的聲音/數據解碼器裝置的電氣測量 | Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band; part 4: electrical measurements on sound/data decoder units for the digital subcarrier NTSC system |
| IEC 61079-5-1993 | 12GHz頻帶衛星廣播傳輸接收機的測量方法 第5部分:MAC/包系統用解碼器單元的電氣測量 | Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band; part 5: electrical measurements on decoder units for MAC/packet systems |
| IEC 61096 AMD 1-1996 | 數字音頻激光唱盤重放設備特性的測量方法 修改1 | Methods of measuring the characteristics of reproducing equipment for digital audio compact discs; Amendment 1 |
| IEC 61096-1992 | 數字音頻激光唱盤重放設備特性的測量方法 | Methods of measuring the characteristics of reproducing equipment for digital audio compact discs |
| IEC 61106-1993 | 視盤 參數的測量方法 | Videodisks; methods of measurement for parameters |
| IEC 61114-2-1996 | 11/12GHz頻帶衛星廣播傳輸接收天線的測量方法 第2部分:個人用及共用接收天線的機械和環境試驗 | Methods of measurement on receiving antennas for satellite broadcast transmission in the 11/12 GHz band - Part 2: Mechanical and environmental tests on individual and collective receiving antennas |
| IEC 61120-4-1992 | 專業用6.3mm磁帶的數字音頻盤式磁帶錄音系統 第4部分:磁帶性能:定義和測量方法 | Digital audio tape recorder reel-to-reel system, using 6,3 mm magnetic tape, for professional use; part 4: magnetic tape properties; definitions and methods of measurement |
| IEC 61121 Corrigendum 1-2003 | 家用滾筒式干衣機.性能測量方法 | Tumble dryers for household use - Methods for measuring the performance |
| IEC 61121-2002 | 家用滾筒式干燥器性能的測量方法 | Tumble dryers for household use - Methods for measuring the performance |
| IEC 61146-1-1994 | 攝像機(PAL/SECAN/NTSC) 測量方法 第1部分:非廣播單傳感器攝像機 | Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 1: Non-broadcast single-sensor cameras |
| IEC 61146-2-1997 | 攝像機(PAL/SECAN/NTSC) 測量方法 第2部分:兩個和三個傳感器的專業攝像機 | Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 2: Two- and three-sensor professional cameras |
| IEC 61146-3-1997 | 攝像機(PAL/SECAN/NTSC) 測量方法 第3部分:非廣播用攝像記錄器 | Video cameras (PAL/SECAM/NTSC) - Methods of measurements - Part 3: Non-broadcast camera-recorders |
| IEC 61146-4-1998 | 攝像機(PAL/SECAN/NTSC) 測量方法 第4部分:攝像機和攝像記錄器的自動功能 | Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 4: Automatic functions of video cameras and camera-recorders |
| IEC 61169-1 AMD 1-1996 | 射頻連接器 第1部分:總規范 一般要求和測量方法 修改1 | Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods; Amendment 1 |
| IEC 61169-1 AMD 2-1997 | 射頻連接器 第1部分:總規范 一般要求和測量方法 修改2 | Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods; Amendment 2 |
| IEC 61169-1 Edition 1.2-1998 | 射頻連接器.第1部分:總規范.一般要求和測量方法 | Radio-frequency connectors - Part 1: Generic specification; General requirements and measuring methods |
| IEC 61169-1-1992 | 射頻連接器 第1部分:總規范 一般要求和測量方法 | Radio-frequency connectors; part 1: generic specification; general requirements and measuring methods |
| IEC 61191-6-2010 | 印刷電路板組件.第6部分:球柵陣列和網格陣列的焊接接頭內空隙及測量方法用評定標準 | Printed board assemblies - Part 6: Evaluation criteria for voids in soldered joints of BGA and LGA and measurement method |
| IEC 61237-1-1994 | 廣播磁帶錄像機 測量方法 第1部分:機械測量 | Broadcast video tape recorders - Methods of measurement - Part 1: Mechanical measurements |
| IEC 61237-2-1995 | 廣播磁帶錄像機 測量方法 第2部分:模擬復合視頻信號的電氣測量 | Broadcast video tape recorders - Methods of measurement - Part 2: Electrical measurements of analogue composite video signals |
| IEC 61237-3 Corrigendum 1-1995 | 廣播磁帶錄像機的測量方法.第3部分:模擬視頻信號的電氣測量 | Methods of measurement for broadcast video tape recorders - Part 3: Electrical measurements for analogue component video signals;Corrigendum 1 |
| IEC 61237-3-1995 | 廣播磁帶錄像機 測量方法 第3部分:模擬視頻信號的電氣測量 | Methods of measurement for broadcast video tape recorders - Part 3: Electrical measurements for analogue component video signals |
| IEC 61237-4-1997 | 廣播磁帶錄像機 測量方法 第4部分:模擬音頻性能測量 | Broadcast video tape recorders - Methods of measurement - Part 4: Analogue audio performance measurements |
| IEC 61280-1-4-2009 | 光纖通信子系統試驗程序.第1-4部分:一般通信子系統.光源環形通量測量方法 | Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems - Light source encircled flux measurement method |
| IEC 61290-6-1-1998 | 光學纖維放大器 基礎規范 第6-1部分:泵浦泄漏參數的測量方法 光解復用器 | Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer |
| IEC 61338-1-3-1999 | 波導型介電諧振器 第1-3部分:一般信息和試驗條件 微波介電諧振器材料復相對介電常數測量方法 | Waveguide type dielectric resonators - Part 1-3: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency |
| IEC 61338-1-4-2005 | 波導型介電諧振器.第1-4部分:一般信息和試驗條件.毫米波頻率時介電諧振器材料的相對復介電常數測量方法 | Waveguide type dielectric resonators - Part 1-4: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency |
| IEC 61340-2-1-2002 | 靜電學.第2-1部分:材料和產品損耗靜電荷的能力的測量方法 | Electrostatics - Part 2-1: Measurement methods; Ability of materials and products to dissipate static electric charge |
| IEC 61580-1-1996 | 波導測量方法 第1部分:偏振面的退耦和旋轉 | Methods of measurement for waveguides - Part 1: Decoupling and rotation of the plane of polarization |
| IEC 61580-2-1996 | 波導測量方法 第2部分:互調電平 | Methods of measurement for waveguides - Part 2: Level of intermodulation products |
| IEC 61580-3-1997 | 波導測量方法 第3部分:群時延的變化 | Methods of measurement for waveguides - Part 3: Variation of group delay |
| IEC 61580-4 Corrigendum 1-2006 | 波導測量方法 第4部分:波導和波導組件的衰減.勘誤1 | Methods of measurement for waveguides - Part 4: Attenuation of waveguide and waveguide assemblies - Corrigendum 1 |
| IEC 61580-4-1997 | 波導測量方法 第4部分:波導和波導組件的衰減 | Methods of measurement for waveguides - Part 4: Attenuation of waveguide and waveguide assemblies |
| IEC 61580-7-1996 | 波導測量方法 第7部分:圖解法測定波導管性能 | Methods of measurement for waveguides - Part 7: Graphical method for the determination of waveguide performance |
| IEC 61580-8-1996 | 波導測量方法 第8部分:波導功率容量 | Methods of measurement for waveguides - Part 8: Waveguide power holding capability |
| IEC 61580-9-1996 | 波導測量方法 第9部分:矩形波導接口處的反射系數 | Methods of measurement for waveguides - Part 9: Reflection coefficient at rectangular waveguide interfaces |
| IEC 61599-1999 | 視盤播放器 測量方法 | Videodisk players - Methods of measurement |
| IEC 61606-3-2008 | 音頻和視聽設備.數字音頻部分.音頻特性的基本測量方法.第3部分:專業使用 | Audio and audiovisual equipment - Digital audio parts - Basic measurements methods of audio characteristics - Part 3: Professional use |
| IEC 61606-4-2005 | 音頻和視聽設備.數字音頻部分.音頻特性的基本測量方法.第4部分:個人電腦 | Audio and audiovisual equipment - Digital audio parts - Basic measurements methods of audio characteristics - Part 4: Personal computer |
| IEC 61689-2007 | 超音波學.物理療法系統.頻率范圍0.5MHz～5MHz的現場規范和測量方法 | Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz |
| IEC 61747-6-2004 | 液晶和固態顯示器件.第6部分:液晶模數的測量方法.透射型 | Liquid crystal and solid-state display devices - Part 6: Measuring methods for liquid crystal modules - Transmissive type |
| IEC 61828-2006 | 超聲波.聚焦傳感器.發送場的定義和測量方法 | Ultrasonics - Focusing transducers - Definitions and measurement methods for the transmitted fields |
| IEC 61830-1997 | 微波鐵氧體元件 主要性能的測量方法 | Microwave ferrite components - Measuring methods for major properties |
| IEC 61843-1997 | 旋磁器件產生的調制分量電平測量方法 | Measuring method for the level of intermodulation products generated in a gyromagnetic device |
| IEC 61855-2003 | 家用電動毛發護理用具.性能的測量方法 | Household electrical hair care appliances - Methods of measuring the performance |
| IEC 61988-2-1-2002 | 等離子體顯示板.第2-1部分:光學測量方法 | Plasma display panels - Part 2-1: Measuring methods, Optical |
| IEC 61988-2-2-2003 | 等離子體顯示板.第2-2部分:光電測量方法 | Plasma display panels - Part 2-2: Measuring methods; Optoelectrical |
| IEC 62007-2 Edition 2.0-2009 | 纖維光學系統用半導體光電器件.第2部分:測量方法 | Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods |
| IEC 62007-2-2009 | 光纖系統用半導體光電器件.第2部分:測量方法 | Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods |
| IEC 62018-2003 | 信息技術設備的功率消耗.測量方法 | Power consumption of information technology equipment - Measurement methods |
| IEC 62024-1 Corrigendum 1-2008 | 高頻感應元件.電氣特性和測量方法.第1部分:毫微亨利芯片感應器 | High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor corrigendum 1 |
| IEC 62024-1-2008 | 高頻感應元件.電氣特性和測量方法.第1部分:毫微亨利芯片感應器 | High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor |
| IEC 62024-2-2008 | 高頻感應元件.電氣特性和測量方法.第2部分:直流對直流變流器用感應器的額定電流 | High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC to DC converter |
| IEC 62025-1-2007 | 高頻感應元件.非電氣特性和測量方法.第1部分:電子和遠程通信設備用固定式表面安裝的感應器 | High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment |
| IEC 62025-2-2005 | 高頻感應部件.非電氣特性和測量方法.第2部分:非電氣特性的試驗方法 | High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics |
| IEC 62044-1-2002 | 軟磁材料襯芯的測量方法.第1部分:總規范 | Cores made of soft magnetic materials - Measuring methods - Part 1: Generic specification |
| IEC 62044-2-2005 | 軟磁材料制芯.測量方法.第2部分:在低激發能級下的電磁特性 | Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level |
| IEC 62044-3-2000 | 軟磁性材料制成的磁芯.測量方法.第3部分:高沖擊水平的磁化特性 | Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic properties at high excitation level |
| IEC 62087-2008 | 音頻、視頻和相關設備的功率消耗用測量方法 | Methods of measurement for the power consumption of audio, video and related equipment |
| IEC 62121-2001 | 微型盤錄音機/重放機的測量方法 | Methods of measurement for minidisc recorders/players |
| IEC 62122-2002 | 消費者使用的數字VTRs的測量方法.電子和機械性能 | Methods of measurement for consumer-use digital VTRs - Electronic and mechanical performances |
| IEC 62233-2005 | 家用電器和類似用途器具有關人體輻射的電磁場測量方法 | Measurement methodes for electromagnetic fields of household appliances and similar apparatus with regard to human exposure |
| IEC 62272-2-2007 | 全球數字無線廣播(DRM).第2部分:波段小于30MHz的無線廣播.DRM發射機的測量方法 | Digital radio mondiale (DRM) - Part 2: Digital radio in the bands below 30 MHz - Methods of measurement for DRM transmitters |
| IEC 62273-1-2007 | 無線電發射機測量方法.第1部分:地面數字電視發射機的工作特性 | Methods of measurement for radio transmitters - Part 1: Performance characteristics of terrestrial digital television transmitters |
| IEC 62276-2005 | 表面聲波裝置用單晶薄片.規范和測量方法 | Single crystal wafers for surface acoustic wave (SAW) device application - Specifications and measuring methods |
| IEC 62333-2-2006 | 數字器件和設備用噪聲抑制片.第2部分:測量方法 | Noise suppression sheet for digital devices and equipment - Part 2: Measuring methods |
| IEC 62341-6-1-2009 | 有機發光二極管(OLED)顯示器.第6-1部分:光學參數及光電學參數的測量方法 | Organic light emitting diode (OLED) displays - Part 6-1: Measuring methods of optical and electro-optical parameters |
| IEC 62372-2006 | 核儀器.封裝的閃爍器.光輸出和固有分辨率測量方法 | Nuclear instrumentation - Housed scintillators - Measurement methods of light output and intrinsic resolution |
| IEC 62389-2005 | DVD播放機的測量方法 | Methods of measurement for DVD players |
| IEC 62431-2008 | 毫米波頻中電磁波吸收器的反射率.測量方法 | Reflectivity of electromagnetic wave absorbers in millimetre wave frequency - Measurement methods |
| IEC 62489-1-2010 | 電聲學.助聽用音頻電磁感應環路系統.第1部分:系統組件性能的具體說明及測量方法 | Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components |
| IEC/PAS 62437-2005 | 板式運載工具、船舶和設備上用的接收機保護用無線電干擾特性.限值和測量方法.有源天線規范 | Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices - Limits and methods of measurement - Specification for active antennas |
| IEC/PAS 62587-2008 | 便攜式家用電子房間空氣凈化器的性能測量方法 | Method for measuring performance of portable household electric room air cleaners |
| IEC/PAS 62593-2008 | 無線通信和廣播系統中Mach-Zehnder光學調節器用半波長電壓的測量方法 | Measurement method of a half-wavelength voltage for Mach-Zehnder optical modulator in wireless communication and broadcasting systems |
| IEC/TR 60440 Corrigendum 1-1974 | 電阻器非線性的測量方法 | Method of measurement of non-linearity in resistors |
| IEC/TR 60440-1973 | 電阻器非線性的測量方法 | Method of measurement of non-linearity in resistors |
| IEC/TR 60854-1986 | 超聲脈沖回聲診斷設備性能的測量方法 | Methods of measuring the performance of ultrasonic pulse-echo diagnostic equipment |
| IEC/TR 61088-1991 | 超聲波壓電陶瓷傳感器的特性和測量方法 | Characteristics and measurements of ultrasonic piezoceramic transducers |
| IEC/TR 61340-2-2-2000 | 靜電 第2-2部分:測量方法 充電率的測量 | Electrostatics - Part 2-2: Measurement methods; Measurement of chargeability |
| IEC/TR 61341-2010 | 反光燈的中心光束強度及波束角(s)的測量方法 | Method of measurement of centre beam intensity and beam angle(s) of reflector lamps |
| IEC/TR 61807-1999 | 升高溫下硬磁材料的磁性能 測量方法 | Magnetic properties of magnetically hard materials at elevated temperatures - Methods of measurement |
| IEC/TR 62002-4-2009 | 移動和便攜式DVB-T/H無線電通路.第4部分:手持波音終端的總輻射靈敏度用測量方法 | Mobile and portable DVB-T/H radio access - Part 4: Measurement methods for total radiated sensitivity in hand held broadcast terminals |
| IEC/TR 62221-2001 | 光纖.測量方法.微彎敏感性 | Optical fibres - Measurement methods - Microbending sensitivity |
| IEC/TR 62245-2002 | 光纖.測量方法.A3和A4型光纖的彎曲損耗 | Optical fibres - Measurement methods - Bend loss for A3 and A4 type fibres |
| IEC/TR2 60816-1984 | 低壓電力線和信號線上短時瞬態的測量方法指南 | Guide on methods of measurement of short duration transients on low voltage power and signal lines. |
| IEC/TS 62312-1-1-2008 | 音頻和視頻同步指南.第1-1部分:音頻和視頻設備和系統同步的測量方法.總則 | Guideline for synchronization of audio and video - Part 1-1: Measurement methods for synchronization of audio and video equipment and systems - General |
| ISO 10012-2003 | 測量管理系統.測量方法和測量設備的要求 | Measurement management systems - Requirements for measurement processes and measuring equipment |
| ISO 10302-1996 | 聲學 小型通風裝置輻射空氣噪聲的測量方法 | Acoustics - Method for the measurement of airborne noise emitted by small air-moving devices |
| ISO 10494-1993 | 燃?xì)廨啓C(jī)和燃?xì)廨啓C(jī)組 氣載噪音的測量 工程/測量方法 | Gas turbines and gas turbine sets; measurement of emitted airborne noise; engineering/survey method |
| ISO 11269-1-1993 | 土壤質量 污染物對土壤植物群影響的測定 第1部分:抑制根系生長的測量方法 | Soil quality; determination of the effects of pollutants on soil flora; part 1: method for the measurement of inhibition of root growth |
| ISO 11698-1-2000 | 縮微攝影技術 開窗卡掃描儀生成影像質量的測量方法 第1部分:測試影像的特性 | Micrographics - Methods of measuring image quality produced by aperture card scanners - Part 1: Characteristics of the test images |
| ISO 11698-2-2000 | 縮微攝影技術 開窗卡掃描儀生成影像質量的測量方法 第2部分:質量標準和控制 | Micrographics - Methods of measuring image quality produced by aperture card scanners - Part 2: Quality criteria and control |
| ISO 11929-6-2005 | 電離輻射測量探測限和判斷閾的確定.第6部分:基本原則及對瞬態測量方法的應用 | Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 6: Fundamentals and applications to measurements by use of transient mode |
| ISO 12124-2001 | 聲學.助聽器真耳聲特性的測量方法 | Acoustics - Procedures for the measurement of real-ear acoustical characteristics of hearing aids |
| ISO 12364-2001 | 兩輪摩托車 防抱死系統（ABS） 試驗和測量方法 | Two-wheeled motorcycles - Antilock braking systems (ABS) - Tests and measurement methods |
| ISO 12366-2001 | 兩輪輕便摩托車 防抱死系統（ABS） 試驗和測量方法 | Two-wheeled mopeds - Antilock braking systems (ABS) - Tests and measurement methods |
| ISO 12800-2003 | 核燃料技術.氧化鈾粉末比表面積的BET測量方法指南 | Nuclear fuel technology - Guide to the measurement of the specific surface area of uranium oxide powders by the BET method |
| ISO 13328-2000 | 摩托車輪胎 輪胎滾動圓周長的測量方法 負載下的新輪胎 | Motorcycle tyres - Measurement of tyre rolling circumference - Loaded new tyres |
| ISO 13503-2 AMD 1-2009 | 石油和天然氣工業.完井液和材料.第2部分:應用在水力壓裂法和砂礫填充操作中的支撐物性能測量方法 | Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations - Amendment 1: Addition of Annex B: Proppant specification |
| ISO 13752-1998 | 空氣質量 采用第二種方法作為參照的現場條件下測量方法的不確定度的評定 | Air quality - Assessment of uncertainty of a measurement method under field conditions using a second method as reference |
| ISO 13753-1998 | 機械振動與沖擊 手臂振動 手臂系統為負載時彈性材料振動傳遞率的測量方法 | Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system |
| ISO 14242-2-2000 | 外科植入物.總的髖關節假肢的磨損.第2部分:測量方法 | Implants for surgery - Wear of total hip joint prostheses - Part 2: Methods of measurement |
| ISO 14243-2-2009 | 外科植入物.總的膝關節假肢的磨損.第2部分:測量方法 | Implants for surgery - Wear of total knee-joint prostheses - Part 2: Methods of measurement |
| ISO 14377-2002 | 罐裝脫脂牛奶.錫含量測定.使用石墨爐原子吸收光譜測量方法 | Canned evaporated milk - Determination of tin content - Method using graphite furnace atomic absorption spectrometry |
| ISO 14524-2009 | 攝影.電子靜態圖像攝影機.光電轉換功能(OECFs)測量方法 | Photography - Electronic still-picture cameras - Methods for measuring opto-electronic conversion functions (OECFs) |
| ISO 14695 Technical Corrigendum 1-2009 | 工業風扇.風扇振動的測量方法.技術勘誤1 | Industrial fans - Method of measurement of fan vibration; Technical Corrigendum 1 |
| ISO 14695-2003 | 工業風機.風機振動的測量方法 | Industrial fans - Method of measurement of fan vibration |
| ISO 14853-2005 | 塑料.含水系統中塑料材料富氧菌生物降解性的測定.生物氣產生的測量方法 | Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production |
| ISO 15242-1-2004 | 滾動軸承.振動測量方法.第1部分:基本原則 | Rolling bearings - Measuring methods for vibration - Part 1: Fundamentals |
| ISO 15242-2 Technical Corrigendum 1-2010 | 滾動軸承.振動測量方法.第2部分:帶圓柱芯和外表面的徑向滾珠軸承.技術勘誤表1 | Rolling bearings - Measuring methods for vibration - Part 2: Radial ball bearings with cylindrical bore and outside surface; Technical Corrigendum 1 |
| ISO 15242-2-2004 | 滾動軸承.振動測量方法.第2部分:帶圓柱芯和外表面的徑向滾珠軸承 | Rolling bearings - Measuring methods for vibration - Part 2: Radial ball bearings with cylindrical bore and outside surface |
| ISO 15242-3 Technical Corrigendum 1-2010 | 滾動軸承.振動測量方法.第3部分:帶圓柱芯和外表面的徑向球面和圓錐軸承.技術勘誤表1 | Rolling bearings - Measuring methods for vibration - Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface; Technical Corrigendum 1 |
| ISO 15242-3-2006 | 滾動軸承.振動測量方法.第3部分:帶圓柱芯和外表面的徑向球面和圓錐軸承 | Rolling bearings - Measuring methods for vibration - Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface |
| ISO 15242-4-2007 | 滾動軸承.振動測量方法.第4部分:帶有圓柱孔和外表面的徑向滾動軸承 | Rolling bearings - Measuring methods for vibration - Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface |
| ISO 15860-2006 | 航天系統.氣體污染.現場試驗測量方法 | Space systems - Gas contamination - Measurement methods for field tests |
| ISO 1607-1-1993 | 容積真空泵 性能測量方法 第1部分:體積流速(抽速)的測量 | Positive-displacement vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed) |
| ISO 1607-2-1989 | 容積真空泵 性能測量方法 第2部分:極限壓力的測量 | Positive-displacement vacuum pumps; measurement of performance characteristics; part 2: measurement of ultimate pressure |
| ISO 17081-2004 | 氫滲透的測量方法和用電化學法測定金屬中的氫吸收和遷移 | Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique |
| ISO 18164-2005 | 乘用車、卡車、公共汽車和摩托車輪胎.滾動阻力測量方法 | Passenger car, truck, bus and motorcycle tyres - Methods of measuring rolling resistance |
| ISO 18233-2006 | 聲學.建筑物和房間聲學新測量方法的應用 | Acoustics - Application of new measurement methods in building and room acoustics |
| ISO 18909 Technical Corrigendum 1-2006 | 照相.沖洗的照相彩色膠片和相紙.影像穩定性測量方法.技術勘誤1 | Photography - Processed photographic colour films and paper prints - Methods for measuring image stability; Technical Corrigendum 1 |
| ISO 21727-2004 | 攝影.電影音頻材料的感覺級音量的測量方法 | Cinematography - Method of measurement of perceived loudness of motion-picture audio material |
| ISO 22234-2005 | 電影攝影.電影多路聲道系統的相對和絕對聲壓級.適用于模擬照相軟片聲音、數字照相軟片聲音和數字影院聲音的 | Cinematography - Relative and absolute sound pressure levels for motion-picture multi-channel sound systems - Measurement methods and levels applicable to analog photographic film audio, digital photographic film audio and D-cinema audio |
| ISO 22856-2008 | 植保設備.噴霧漂移的實驗室測量方法.風洞 | Equipment for crop protection - Methods for the laboratory measurement of spray drift - Wind tunnels |
| ISO 22866-2005 | 農作物保護設備.噴霧漂移的現場測量方法 | Equipment for crop protection - Methods for field measurement of spray drift |
| ISO 25178-6-2010 | 產品的幾何技術規范(GPS).表面紋理:表面的.第6部分:表面紋理測量方法的分類 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture |
| ISO 3822-1 AMD 1-2008 | 聲學.用于供水設施的裝置和設備發出噪音的實驗室試驗.第1部分:測量方法.修改件1:不確定性測量 | Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement; Amendment 1: Measurement uncertainty |
| ISO 3822-1-1999 | 聲學 供水設施的裝置和設備發射的噪聲的實驗室測試 第1部分:測量方法 | Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement |
| ISO 3882-2003 | 金屬和其他無機物覆層.厚度測量方法述評 | Metallic and other inorganic coatings - Review of methods of measurement of thickness |
| ISO 3929-2003 | 道路車輛.在檢驗或維修過程中廢氣排放量的測量方法 | Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance |
| ISO 4463-1-1989 | 建筑物的測量方法 定線和測量 第1部分:計劃和組織、測量程序、驗收標準 | Measurement methods for building; setting-out and measurement; part 1: planning and organization, measuring procedures, acceptance criteria |
| ISO 4463-2-1995 | 建筑物的測量方法 定線和測量 第2部分:測站和目標 | Measurement methods for building - Setting-out and measurement - Part 2: Measuring stations and targets |
| ISO 4463-3-1995 | 建筑物的測量方法 定線和測量 第3部分:觀測和測量作業所獲資料的檢查目錄 | Measurement methods for building - Setting-out and measurement - Part 3: Check-lists for the procurement of surveys and measurement services |
| ISO 4475-1989 | 針葉樹和闊葉樹鋸材原木 可見缺陷 測量方法 | Coniferous and broadleaved tree sawlogs; visible defects; measurement |
| ISO 4671-2007 | 橡膠和塑料軟管及軟管組件.軟管尺寸和軟管組件長度的測量方法 | Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies |
| ISO 5007-2003 | 農用輪式拖拉機.駕駛員的座位.傳動振動的實驗室測量方法 | Agricultural wheeled tractors - Operator's seat - Laboratory measurement of transmitted vibration |
| ISO 5725-5 Technical Corrigendum 1-2005 | 測量方法和結果的準確度(正確性和精密度).第5部分:確定標準測試方法的精密度的可替代方法.技術勘誤1 | Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method; Technical Corrigendum 1 |
| ISO 5884-1987 | 航空航天 流體系統和組件 液壓油液固體顆粒污染的系統取樣和測量方法 | Aerospace; Fluid systems and components; Methods for system sampling and measuring the solid particle contamination of hydraulic fluids |
| ISO 6015-2006 | 土方機械.液壓挖掘機和反鏟裝載機.挖掘力的測量方法 | Earth-moving machinery - Hydraulic excavators and backhoe loaders - Methods of determining tool forces |
| ISO 6016-2008 | 土方機械.整個機器及其設備和部件的質量測量方法 | Earth-moving machinery - Methods of measuring the masses of whole machines, their equipment and components |
| ISO 6342-2003 | 縮微攝影技術.開窗卡.增厚區厚度的測量方法 | Micrographics - Aperture cards - Method of measuring thickness of buildup area |
| ISO 6442-2005 | 門扇.一般和局部平整度.測量方法 | Door leaves - General and local flatness - Measurement method |
| ISO 6460-1-2007 | 摩托車.廢氣排放和燃料消耗測量方法.第1部分:一般試驗要求 | Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements |
| ISO 6460-2-2007 | 摩托車.廢氣排放和燃料消耗的測量方法.第2部分:試驗循環和特殊試驗條件 | Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions |
| ISO 6460-3-2007 | 摩托車.廢氣排放和燃料消耗的測量方法.第3部分:恒速下的燃料消耗測量 | Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed |
| ISO 6591-1-1984 | 包裝 袋 說明及測量方法 第1部分:空紙袋 | Packaging; Sacks; Description and method of measurement; Part 1 : Empty paper sacks |
| ISO 6591-2-1985 | 包裝 袋 說明及測量方法 第2部分:熱塑柔性薄膜空袋 | Packaging; Sacks; Description and method of measurement; Part 2 : Empty sacks made from thermoplastic flexible film |
| ISO 6855-1983 | 道路車輛 裝有控制點火發動機裝置的機動自行車排出氣體污染物的測量方法 | Road vehicles; Measurement methods for gaseous pollutants emitted by mopeds equipped with a controlled ignition engine |
| ISO 7077-1981 | 建筑物的測量方法 確定尺度配合的一般原則和步驟 | Measuring methods for building; General principles and procedures for the verification of dimensional compliance |
| ISO 7117-2010 | 摩托車.最大速度的測定用測量方法 | Motorcycles - Measurement method for determining maximum speed |
| ISO 7140-1985 | 越野雪橇 動態性能的測定 實驗室測量方法 | Cross-country skis; Determination of dynamic performance; Laboratory measurement method |
| ISO 737-1975 | 針葉樹鋸材 尺寸 測量方法 | Coniferous sawn timber; Sizes; Methods of measurement |
| ISO 7935-1992 | 固定源排放 二氧化硫質量濃度的測定 自動測量方法性能特征 | Stationary source emissions; determination of the mass concentration of sulfur dioxide; performance characteristics of automated measuring methods |
| ISO 7976-1-1989 | 建筑公差 建筑物和建筑制品的測量方法 第1部分:方法和儀器 | Tolerances for building; methods of measurement of buldings and building products; part 1: methods and instruments |
| ISO 7976-2-1989 | 建筑公差 建筑物和建筑制品的測量方法 第2部分:測點的位置 | Tolerances for building; methods of measurement of buildings and building products; part 2: position of measuring points |
| ISO 8116-8-1995 | 紡織機械與附件 經軸 第8部分:跳動公差的定義和測量方法 | Textile machinery and accessories - Beams for winding - Part 8: Definitions of run-out tolerances and methods of measurement |
| ISO 8178-3-1994 | 往復式內燃機 排放測量 第3部分:穩態工況排氣煙度的定義及測量方法 | Reciprocating internal combustion engines - Exhaust emission measurement - Part 3: Definitions and methods of measurement of exhaust gas smoke under steady-state conditions |
| ISO 8401-1986 | 金屬覆蓋層 延展性的測量方法述評 | Metallic coatings; Review of methods of measurement of ductility |
| ISO 8687-1987 | 電影 超8mm、16mm和35mm變積式光學聲跡的信噪比 測量方法 | Cinematography; Signal-to-noise ratio of 8 mm Type S, 16 mm and 35 mm variable-area photographic sound records; Method of measurement |
| ISO 8705-2005 | 機動腳踏兩用車.重心位置的測量方法 | Mopeds - Measurement method for location of centre of gravity |
| ISO 8709 Technical Corrigendum 1-1998 | 輕便摩托車 制動器和制動裝置 試驗和測量方法 技術勘誤1 | Mopeds - Brakes and braking devices - Tests and measurement methods; Technical Corrigendum 1 |
| ISO 8709-1995 | 輕便摩托車 制動器和制動裝置 試驗和測量方法 | Mopeds - Brakes and braking devices - Tests and measurement methods |
| ISO 8710-1995 | 摩托車 制動器和制動裝置 試驗及測量方法 | Motorcycles - Brakes and braking devices - Tests and measurement methods |
| ISO 8904-1990 | 闊葉樹鋸材 尺寸 測量方法 | Broadleaved sawn timber; sizes; methods of measurement |
| ISO 9043-2008 | 摩托車和機動自行車.慣性矩的測量方法 | Mopeds - Measurement method for moments of inertia |
| ISO 9129-2008 | 摩托車.慣性矩的測量方法 | Motorcycles - Measurement methods for moments of inertia |
| ISO 9130-2005 | 摩托車.重心位置的測量方法 | Motorcycles - Measurement method for location of centre of gravity |
| ISO 9358-1994 | 光學和光學儀器 成像系統雜散光 定義及測量方法 | Optics and optical instruments - Veiling glare of image-forming systems - Definitions and methods of measurement |
| ISO/IEC 10561-1999 | 信息技術 辦公設備 打印設備 吞吐量測量方法 1類和2類打印機 | Information technology - Office equipment - Printing devices - Method for measuring throughput - Class 1 and class 2 printers |
| ISO/IEC 14143-2-2002 | 信息技術.軟件度量.功能大小度量.第2部分:依據ISO/IEC 14143-1:1998的軟件尺寸測量方法的合格評定 | Information technology - Software measurement; Functional size measurement - Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1:1998 |
| ISO/IEC 14545-1998 | 信息技術 辦公設備 復印機有效印速率的測量方法 | Information technology - Office equipment - Method for measuring copying machine productivity |
| ISO/IEC 19761-2003 | 軟件工程.COSMIC-FFP.函數長度測量方法 | Software engineering - COSMIC-FFP - A functional size measurement method |
| ISO/IEC 19799-2007 | 信息技術.已印刷頁面上光澤一致性的測量方法 | Information technology - Method of measuring gloss uniformity on printed pages |
| ISO/IEC 24734-2009 | 信息技術.辦公設備.數字印刷能力的測量方法 | Information technology - Office equipment - Method for measuring digital printing productivity |
| ISO/IEC 24735-2009 | 信息技術.辦公設備.數字復印能力的測量方法 | Information technology - Office equipment - Method for measuring digital copying productivity |
| ISO/IEC 29881-2008 | 信息技術.軟件和系統工程.FiSMA 1.1功能尺寸測量方法 | Information technology - Software and systems engineering - FiSMA 1.1 functional size measurement method |
| ISO/IEC TR 14143-3-2003 | 信息技術.軟件測量.功能尺寸測量.第3部分:功能尺寸測量方法的鑒定 | Information technology - Software measurement; Functional size measurement - Part 3: Verification of functional size measurement methods |
| ISO/PAS 12158-2002 | 道路車輛.制動系統.溫度的測量方法 | Road vehicles - Braking systems - Temperature mesuring methods |
| ISO/TR 10064-6-2009 | 檢驗實施規程.第6部分:斜齒輪測量方法 | Code of inspection practice - Part 6: Bevel gear measurement methods |
| ISO/TR 22971-2005 | 測量方法和結果的準確性(真實性和精確性).設計、執行和統計分析實驗室間可重復性和再現性結果中使用ISO 572 | Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results |
| ISO/TR 27609-2007 | 手持工具的振動.研磨機振動測量方法.系列試驗評估 | Vibration in hand-held tools — Vibrationmeasurement methods for grinders —Evaluation of round-robin test |
| ISO/TR 9212-2006 | 液體比重測定法.明渠水流測量.水流細沙測量方法 | Hydrometry - Measurement of liquid flow in open channels - Methods of measurement of bedload discharge |
| 編號 | 中文名稱 | 英文名稱 |