| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI/ASTM F1677-2005 | 使用便攜式可傾斜鉸鏈支桿滑動測試儀(PIAST)的試驗方法 | Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST) |
| ANSI/ASTM F1678-1997 | 便攜式鉸鏈支桿滑動測試儀(PAST)使用試驗方法 | Test Method for Using a Portable Articulated Strut Slip Tester (PAST) |
| ANSI/BHMA A156.1-2006 | 合頁和鉸鏈 | Butts and Hinges |
| ANSI/BHMA A156.17-2004 | 自閉式鉸鏈和樞軸 | Self-Closing Hinges and Pivots |
| ANSI/BHMA A156.20-2006 | 條式及T形鉸鏈和搭鉤 | Strap and Tee Hinges, and Hasps |
| ANSI/BHMA A156.26-2006 | 連續鉸鏈 | Continuous Hinges |
| ANSI/BHMA A156.7-2002 | 樣板鉸鏈尺寸 | Template Hinge Dimensions |
| ANSI/SAE J1110-1993 | 橡膠輪胎的鉸鏈集材拖運機的特性和定義 | Specification Definitions - Articulated, Rubber-Tired Log Skidder |
| ASTM F 1758-2005 | 安全等級雙開式彈簧門用安全鉸鏈的標準試驗方法 | Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors |
| BS 2837-1988 | 包裝箱提升裝置用鋼鉸鏈與鏈帶組件規范 | Specification for steel links and strap assemblies for lifting attachments for packing cases |
| BS DD 171-1987 | 鉸鏈或樞軸安裝的門的性能要求(包括試驗方法)規定指南 | Guide to specifying performance requirements for hinged or pivoted doors (including test methods) |
| BS DD CEN/TS 13126-6-2004 | 建筑五金、窗戶和門上窗的裝置.要求和試驗方法.可變幾何形狀的固定鉸鏈(有或無摩擦系統) | Building hardware, fittings for windows and door height windows - Requirements and test methods - Variable geometry stay hinges (with or without a friction system) |
| BS DD CEN/TS 13126-9-2004 | 建筑五金、窗戶和門上窗的配件.要求和試驗方法.尖軸鉸鏈 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Pivot hinges |
| BS EN 14512-2006 | 危險貨物運輸用容器.液態化學藥品運輸用罐設備.帶繞軸旋轉螺釘?shù)你q鏈人孔蓋和頸環 | Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Hinged manhole cover and neckrings with pivoting bolts |
| BS EN 948-1999 | 鉸鏈門或旋轉門.耐靜扭力的測定 | Hinged or pivoted doors - Determination of the resistance to static torsion |
| DD 171-1987 | 鉸鏈門和旋轉門性能要求規定指南(包括試驗方法) | Guide to specifying performance requirements for hinged or pivoted doors (including test methods) |
| DIN 18262-1969 | 防火門用可調節非承重彈簧鉸鏈 | Adjustable Non-load-bearing Spring Hinge for Fire Protecting Doors |
| DIN 18272-1987 | 防火間隔.防火門的鉸鏈.彈性鉸鏈和支撐鉸鏈 | Fire barrieres; hinges for fire doors; spring hinge and supporting hinge |
| DIN 27203-2-2004 | 鐵路車輛的狀況.乘客區.第2部分:上車門.結構類型:折疊鉸鏈門 | State of railway vehicles - Passenger area - Part 2: Entrance doors - Type of construction: Folding hinged doors |
| DIN 27203-6-2004 | 鐵路車輛的狀況.乘客區.第6部分:客車之間的后門/門.結構類型:折疊門、推拉門、旋轉裝貨門、鉸鏈門 | State of railway vehicles - Passenger area - Part 6: End doors/doors between coaches - Type of construction: Folding doors, sliding doors, roller loading doors, hinged doors |
| DIN 28125 Bb.1-1989 | 鉸鏈蓋.提升裝置結構的示例 | Hinged covers; example for construction of a lifting aid |
| DIN 4000-48-1986 | 門鉸鏈、合頁和琴式鉸的產品特性圖表 | Tabular layouts of article characteristics for door hinges, hinges and piano hinges |
| DIN 48066-1-1975 | 鉸鏈.第2部分:支架鉸鏈(架空電力線用) | Hinges; supporting hinges (for overhead power lines) |
| DIN 48066-2-1975 | 鉸鏈.第2部分:張力鉸鏈(架空電力線用) | Hinges; strain hinges (for overheard power lines) |
| DIN 56923-1989 | 舞臺工程.舞臺設備.插座鉸鏈 | Stage engineering, stage equipment; socket hinges |
| DIN 68856-2-2004 | 家具五金件.術語和定義.第2部分:家具鉸鏈和襟翼鉸鏈 | Hardware for furniture - Terms and definitions - Part 2: Furniture hinges and flap hinges |
| DIN 68857-2004 | 家具五金件.杯形鉸鏈及其安裝底板.要求和檢驗 | Hardware for furniture - Cup hinges and their mounting plates - Requirements and testing |
| DIN 71805-1990 | 角形鉸鏈.球形承窩.開口彈簧卡環 | Angle joints; housings, circlips |
| DIN 7956-1983 | 五金件.軋制長條鉸鏈 | Hardware; continuos hinge rolled |
| DIN 81301-2003 | 船舶用鉸鏈門帶碰簧銷的插鎖 | Mortise-locks with latch-bolt for hinged doors on ships |
| DIN 81302-2003 | 傳播用鉸鏈門無碰簧銷的插鎖 | Mortise-locks without latch-bolt for hinged doors on ships |
| DIN 81303-2003 | 船舶用廁所和浴室的鉸鏈門插鎖 | Mortise-locks for hinged doors of lavatory and bath on ships |
| DIN 81306-2003 | 船舶用鉸鏈門無銷插鎖 | Mortise-locks without bolt for hinged doors on ships |
| DIN 81311-2005 | 船用重型鉸鏈門的帶碰簧銷的彈簧鎖 | Rim-locks with latch-bolt for heavy hinged doors on ships |
| DIN 81312-1987 | 重型鉸鏈門用無簧鎖的門緣彈簧鎖 | Rim-locks without latch-bolt for heavy hinged doors |
| DIN 81320-1977 | 通道上鉸鏈門用搭扣 | Turnbuckles for flaps in passageways |
| DIN 81401-1978 | 船艙門用的可拆開的連接鉸鏈和折頁.用于螺接 | Loose joints butts and hinges for ship's cabin doors; for screwing-on |
| DIN 81402-1978 | 螺釘安裝的船艙門用鉸鏈 | Hinges for ship's cabinet doors, for screwing-on |
| DIN 81403-1978 | 艦船用帶形鉸鏈 | Strap hinges for ships and boats |
| DIN 83100-1-2002 | 船舶用重型鉸鏈門.第1部分:防風雨(ISO型)、分類和交貨技術條件 | Heavy hinged doors on ships - Part 1: Weathertight (ISO-type), classification, technical delivery conditions |
| DIN 83100-11-2002 | 船舶用重型鉸鏈門.第11部分:無防風雨的、分類和交貨技術條件 | Heavy hinged doors on ships - Part 11: Non-weathertight, classification, technical delivery conditions |
| DIN 83100-12-2002 | 船用重型鉸鏈門.第12部分:不防風雨門.詳細設計要求 | Heavy hinged doors on ships - Part 12: Non weathertight, design details |
| DIN 83100-13-2002 | 船舶用重型鉸鏈門.第13部分:不防風雨的安裝 | Heavy hinged doors on ships - Part 13: Non weathertight, installation |
| DIN 83100-2-2002 | 船舶用重型鉸鏈門.第2部分:防風雨(ISO型)的設計細則 | Heavy hinged doors on ships - Part 2: Weathertight (ISO-type), design details |
| DIN 83100-3-2002 | 船用重型鉸鏈門.第3部分:防風雨(ISO型)門.安裝 | Heavy hinged doors on ships - Part 3: Weathertight (ISO-type), installation |
| DIN 83104-1985 | 船用重型鉸鏈門和艙口用卡栓 | Dogs for heavy hinged doors on ships and for hatches |
| DIN 83105-2002 | 船舶用重型鉸鏈門的鉸鏈 | Hinges for heavy hinged doors on ships |
| DIN 83106-1984 | 船上重型鉸鏈門和艙口用的密封墊片 | Gaskets for heavy hinged doors on ships and for hatches |
| DIN 83222-2006 | 工作面地板、中間底部和通道用帶鉸鏈的蓋板 | Hinged flap for working floors, intermediate bottoms and walkways |
| DIN 83406-1-2001 | 船舶設備用鉸鏈.第1部分:短鉸鏈 | Hinges for ships equipment - Part 1: Short type |
| DIN 83406-2-2001 | 船舶設備用鉸鏈.第2部分:長鉸鏈 | Hinges for ships equipment - Part 2: Long type |
| DIN 85005-17-2001 | 船舶和船舶技術.技術文獻圖形符號.第17部分:門、鉸鏈、操作室、窗、樓梯和電梯 | Ships and marine technology - Graphical symbols for technical documentation - Part 17: Doors, hatches, openings, windows, stairs, elevators |
| DIN CEN/TS 13126-6-2004 | 窗和落地窗用建筑五金和配件.要求和試驗方法.第6部分:(有或無摩擦系統的)可變幾何形狀固定鉸鏈 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 6: Variable geometry stay hinges (with or without a friction system); German version CEN/TS 13126-6:2004 |
| DIN CEN/TS 13126-9-2004 | 窗和門高窗戶的建筑物五金和配件.要求和試驗方法.第9部分:尖軸鉸鏈 | Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 9: Pivot hinges; German version CEN/TS 13126-9:2004 |
| DIN EN 10223-5-1998 | 柵欄用鋼絲和鋼絲制品.第5部分:鋼絲編制鉸鏈網格和結節網格柵欄 | Steel wire and wire products for fences - Part 5: Steel wire woven hinged joint and knotted mesh fencing; German version EN 10223-5:1998 |
| DIN EN 1119-1996 | 塑料管道系統.玻璃纖維增強熱固性塑料(GFK)管和配件.密封性和耐柔性連接和鉸鏈連接磨損能力試驗方法 | Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced articulation joints; German version EN 1119:1996 |
| DIN EN 12982-2000 | 工業閥門.鉸鏈焊接端閥門端對端和中心對末端尺寸 | Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves; German version EN 12982:2000 |
| DIN EN 131-4-2007 | 梯子.第4部分:單或多鉸鏈接合梯 | Ladders - Part 4: Single or multiple hinge-joint ladders; German version EN 131-4:2007 |
| DIN EN 14512-2006 | 危險貨物運輸用容器.液體化學物品運輸?shù)娜萜髟O(shè)備.繞軸旋轉螺釘?shù)你q鏈人孔蓋和頸環 | Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Hinged manhole covers and neckrings with pivoting bolts; English version of DIN EN 14512:2006-10 |
| DIN EN 1935-2002 | 建筑五金件.單軸鉸鏈.要求和試驗方法 | Building hardware - Single-axis hinges - Requirements and test methods; German version EN 1935:2002 |
| DIN EN 353-1-2002 | 防止人員從高處跌落的保護設備.第1部分:設有剛性鉸鏈的導向跌落保護裝置; 德文版本 EN 353-1:2002 | Personal protective equipment against falls from a height - Part 1: Guided type fall arresters including a rigid anchor line; German version EN 353-1:2002 |
| DIN EN 353-2-2002 | 防止人員從高處跌落的保護設備.第2部分:設有柔性鉸鏈的導向跌落保護裝置; 德文版本 EN 353-2:2002 | Personal protective equipment against falls from a height - Part 2: Guided type fall arresters including a flexible anchor line; German version EN 353-2:2002 |
| EN 1677-4-2000 | 吊重裝置組件 安全 第4部分：鉸鏈 8級 | Components for slings - Safety - Part 4: Links, Grade 8 |
| EN 1677-6-2001 | 吊重裝置組件 安全 第6部分：鉸鏈 4級 | Components for slings - Safety - Part 6: Links; Grade 4 |
| EN 1935-2002 | 建筑五金器具 單軸鉸鏈 要求和試驗方法 | Building hardware - Single-axis hinges - Requirements and test methods |
| EN 947-1998 | 鉸鏈門或樞軸門 抗垂直負載的測定 | Hinged or pivoted doors - Determination of the resistance to vertical load |
| EN 948-1999 | 鉸鏈門或樞軸門 耐靜力扭轉的測定 | Hinged or pivoted doors - Determination of the resistance to static torsion |
| EN ISO 9173-1-1995 | 拔牙鉗 第1部分：螺釘和鉸鏈接合型 | Dental extraction forceps - Part 1: Screw and pin joint types (ISO 9173-1:1991) |
| ISO 4141-4-2001 | 道路車輛 多芯連接電纜 第4部分：鉸鏈試驗方法和對裝芯電纜組件的要求 | Road vehicles - Multi-core connecting cables - Part 4: Articulation test methods and requirements for coiled cable assemblies |
| JB/T 8010.14-1999 | 機床夾具零件及部件 鉸鏈壓板 | () |
| JB/T 8033-1999 | 機床夾具零件及部件 鉸鏈軸 | () |
| JB/T 8034-1999 | 機床夾具零件及部件 鉸鏈支座 | () |
| JB/T 8035-1999 | 機床夾具零件及部件 鉸鏈叉座 | () |
| JB/T 9162.23-1999 | 鉸鏈 尺寸 | () |
| JIS A1510-3-2001 | 建筑物門配件的試驗方法.第3部分:暗裝的關門裝置、關門裝置和鉸鏈關門裝置 建築用ドア金物の試験方法 ― 第３部：フロアヒンジ，ドアクローザ及びヒンジクローザ | Test method for door fittings of buildings -- Part 3: Floor concealed door closers, door closers and hinge closers |
| JIS A8346-2004 | 運土機械.鉸鏈?zhǔn)杰嚰苕i.性能要求 土工機械－車體屈折フレームの固定裝置－性能要求事項 | Earth-moving machinery -- Articulated frame lock -- Performance requirements |
| JIS T9220-1992 | 外鎖緊肘鉸鏈?zhǔn)疥P(guān)節 能動ひじ（肘）ヒンジ継手 | Outside locking elbow hinge units |
| NF E28-201-1967 | 潤滑裝置.鉸鏈蓋滑脂塞 | (FLIP TOP LUBRICATOR.) |
| NF F01-031-1976 | 鐵路車輛.大型鉸鏈 | (RAILWAY TRANSPORT EQUIPMENT. HEAVY-DUTY HINGES.) |
| NF F01-032-1976 | 鐵路車輛.中型和大型鉸鏈. 軸 | (RAILWAY TRANSPORT EQUIPMENT. MEDIUM AND HEAVY-DUTY HINGES. PINS.) |
| NF F31-031-1990 | 鐵路車輛.內鉸鏈?zhǔn)介T插鎖.互換性規格和功能規格 | (RAILWAY ROLLING STOCK. MORTISE LOCKS FOR INNER HINGED DOORS. INTERCHANGEABILITY SPECIFICATIONS AND FUNCTIONNAL SPECIFICATIONS.) |
| NF F31-032-1990 | 鐵路車輛.內鉸鏈?zhǔn)介T板把鎖.互換性規格和功能規格 | (RAILWAY ROLLING STOCK. BRACKET LOCKS FOR INNER HINGED DOORS. INTERCHANGEABILITY SPECIFICATIONS AND FUNCTIONNAL SPECIFICAITONS.) |
| NF L81-313-1978 | 機上提升球頭鉸鏈和系環的固定.ＩＳＯ米制螺紋剖面和BNAE公差 | (AIRCRAFT RECEPTACLES FOR JACKING PADS AND MOORING RINGS. METRIC ISO THREAD PROFILE AND BNAE TOLERANCES. (RECH.).) |
| NF L81-323-1978 | 機上提升球頭鉸鏈和系環的固定.ＩＳＯ米制螺紋剖面和公差 | (AIRCRAFT RECEPTACLES FOR JACKING PADS AND MOORING RINGS.METRIC ISO THREAD PROFILE AND TOLERANCES.) |
| NF L92-313-1978 | 由千斤頂提升飛機用的活動球頭鉸鏈.ＩＳＯ米制螺紋剖面和BNAE公差 | (REMOVABLE AIRCRAFT JACKING PADS WITH METRIC ISO THREAD PROFILE AND BNAE TOLERANCES. (RECH.).) |
| NF P20-517-2000 | 鉸鏈門或支樞式門.門扇靜態扭轉的測定 | (Hinged or pivoted doors - Determination of the resistance to static torsion.) |
| NF P26-331-1999 | 建筑五金.電磁鉸鏈.要求和試驗方法 | (BUILDING HARDWARE. ELECTROMAGNETIC HINGES. REQUIREMENTS AND TEST METHODS.) |
| NF S91-129-1996 | 拔牙鉗.第1部分:螺釘和鉸鏈接合型 | (Dental extraction forceps. Part 1 : screw and pin joint types.) |
| NF T57-215-1996 | 塑料管道系統.玻璃增強熱固性塑料管和配件接頭.撓性和鉸鏈接頭耐泄漏和損傷試驗方法 | (Plastics piping systems. Joints for glass-reinforced thermosetting plastics (grp) pipes and fittings. Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints.) |
| QB/T 1235-1991 | 塑料門窗合葉(鉸鏈) | () |
| QB/T 1242-1991 | 家具五金杯狀暗鉸鏈安裝尺寸 | () |
| QB/T 1496-1992 | 事物特性表鉸鏈與門窗合頁 | () |
| QB/T 1738-1993 | 彈簧合頁(鉸鏈) | () |
| QB/T 2189-1995 | 家具五金杯狀暗鉸鏈及其安裝座要求和檢驗 | () |
| prEN 1636-2-1996 | 無壓力排水道和污水用塑料管道系統 不飽和聚脂樹脂(UP) 基玻璃纖維增強熱固性塑料(GRP) 第2部分：帶有撓 | Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 2: Pipes with flexible, reduced articulation or rigid joints |
| 編號 | 中文名稱 | 英文名稱 |