| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 22/136/CD-2008 | IEC/TS 62578:電力電子學系統和設備.有源動力整流器設備的操作條件和特性 | IEC/TS 62578: Power electronics systems and equipment - Service conditions and characteristics of active infeed converter applications |
| IEC 60034-16-2-1991 | 旋轉電機.第16部分:同步電機勵磁系統.第2章:電力系統研究模型 | Rotating electrical machines; part 16: excitation systems for synchronous machines; chapter 2: models for power system studies |
| IEC 60050-421-1990 | 國際電工詞匯 第421章:電力變壓器和電抗器 | International electrotechnical vocabulary; chapter 421: power transformers and reactors |
| IEC 60050-436-1990 | 國際電工詞匯 第436章:電力電容器 | International electrotechnical vocabulary; chapter 436: power capacitors |
| IEC 60050-448-1995 | 國際電工詞匯 第448章:電力系統保護 | International Electrotechnical Vocabulary - Chapter 448: Power system protection |
| IEC 60050-551-1998 | 國際電工詞匯 第551部分:電力電子學 | International Electrotechnical Vocabulary - Part 551: Power electronics |
| IEC 60050-551-20-2001 | 國際電工詞匯 第551-20部分：電力電子學 諧波分析 | International Electrotechnical Vocabulary - Part 551-20: Power electronics; Harmonic analysis |
| IEC 60050-603 AMD 1-1998 | 國際電工詞匯 第603章:發電、輸電和配電 電力系統規劃和管理 修改1 | International Electrotechnical Vocabulary - Chapter 603: Generation, transmission and distribution of electricity - Power system planning and management; Amendment 1 |
| IEC 60050-603-1986 | 國際電工詞匯 第603章:發電、輸電和配電 電力系統規劃和管理 | International Electrotechnical Vocabulary. Part 603 : Chapter 603: Generation, transmission and distribution of electricity. Power system planning and management |
| IEC 60050-811-1991 | 國際電工詞匯 第811章:電力牽引 | International electrotechnical vocabulary; chapter 811: electric traction |
| IEC 60076-1 AMD 1-1999 | 電力變壓器 第1部分:總則 修改1 | Power transformators - Part 1: General; Amendment 1 |
| IEC 60076-1 Corrigendum 1-1997 | 電力變壓器.第1部分:總則 | Power transformators; part 1: general |
| IEC 60076-1 Edition 2.1-2000 | 電力變壓器.第1部分:總則 | Power transformators - Part 1: General |
| IEC 60076-1-1993 | 電力變壓器.第1部分:總則 | Power transformators; part 1: general |
| IEC 60076-10-1-2005 | 電力變壓器.第10-1部分:聲級的測定.應用指南 | Power transformers - Part 10-1: Determination of sound levels - Application guide |
| IEC 60076-10-2005 | 電力變壓器.第10部分:聲級的測定 | Power transformers - Part 10: Determination of sound levels |
| IEC 60076-11-2004 | 電力變壓器.第11部分:干式變壓器 | Power transformers - Part 11: Dry-type transformers |
| IEC 60076-12-2008 | 電力變壓器.第12部分:干型電力變壓器用負荷指南 | Power transformers - Part 12: Loading guide for dry-type power transformers |
| IEC 60076-13-2006 | 電力變壓器.第13部分:自我保護式充液變壓器 | Power transformers - Part 13: Self-protected liquid-filled transformers |
| IEC 60076-15-2008 | 電力變壓器.第15部分:充氣電力變壓器 | Power transformers - Part 15: Gas-filled power transformers |
| IEC 60076-2 Corrigendum 1-1997 | 電力變壓器.第2部分:溫升 | Power transformers; part 2: temperature rise |
| IEC 60076-2-1993 | 電力變壓器 第2部分:溫升 | Power transformers; part 2: temperature rise |
| IEC 60076-3 Corrigendum 1-2000 | 電力變壓器.第3部分:絕緣水平、電介質試驗和空氣中的外間隙 | Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air; Corrigendum 1. |
| IEC 60076-3-2000 | 電力變壓器 第3部分:絕緣水平、電介質試驗和空氣中的外間隙 | Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air |
| IEC 60076-4-2002 | 電力變壓器.第4部分:閃電脈沖和開關脈沖試驗指南.電力變壓器和反應器 | Power transformers - Part 4: Guide to the lightning impulse and switching impulse testing; Power transformers and reactors |
| IEC 60076-5-2006 | 電力變壓器 第5部分:承受短路的能力 | Power transformers - Part 5: Ability to withstand short circuit |
| IEC 60076-7-2005 | 電力變壓器.第7部分:油浸電力變壓器加載指南 | Power transformers - Part 7: Loading guide for oil-immersed power transformers |
| IEC 60076-8-1997 | 電力變壓器 第8部分:應用指南 | Power transformers - Application guide |
| IEC 60092-303 AMD 1-1997 | 船舶電氣設施 第303部分:設備 電力和照明變壓器 修改1 | Electrical installations in ships - Part 303: Equipment - Transformers for power and lighting; Amendment 1 |
| IEC 60092-303-1980 | 船舶電氣設施 第303部分:設備 電力和照明變壓器 | Electrical installations in ships. Part 303 : Equipment - Transformers for power and lighting |
| IEC 60092-350-2008 | 船舶用電氣裝置.第350部分:船舶和海上設備用電力控制器和儀器電纜的通用結構和試驗方法 | Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications |
| IEC 60092-353 AMD 1-2001 | 船舶電氣設施 第353部分:額定電壓為1kV和3kV的擠壓固體絕緣單芯和多芯非徑向場電力電纜 修改1 | Electrical installations in ships - Part 353: Single and multicore non-radial field power cables with extruded solid insulation for rated voltages 1 kV and 3 kV; Amendment 1 |
| IEC 60092-353-1995 | 船舶電氣設施 第353部分:額定電壓為1kV和3kV的擠壓固體絕緣單芯和多芯非徑向場電力電纜 | Electrical installations in ships - Part 353: Single and multicore non-radial field power cables with extruded solid insulation for rated voltages 1 kV and 3 kV |
| IEC 60092-354-2003 | 船舶電氣設施.第354部分:額定電壓為6至30kV的擠壓固體絕緣單芯和三芯電力電纜 | Electrical installations in ships - Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (U<(Index)m> = 7,2 kV) up to 30 kV (U<(Index)m> = 36 kV) |
| IEC 60092-359 AMD 1 Corrigendum 1-1995 | 船舶電氣設施.第359部分:船用電力電纜和通信電纜用護套材料.修改件1 | Electrical installations in ships - Part 359: Sheathing materials for shipboard power and telecommunication cables; Amendment 1; Corrigendum 1. |
| IEC 60092-359 AMD 1-1994 | 船舶電氣設施 第359部分:船用電力電纜和通信電纜用護套材料 修改1 | Electrical installations in ships - Part 359: Sheathing materials for shipboard power and telecommunication cables; Amendment 1 |
| IEC 60092-359 AMD 2-1999 | 船舶電氣設施 第359部分:船用電力電纜和通信電纜用護套材料 修改2 | Electrical installations in ships - Part 359: Sheathing materials for shipboard power and telecommunication cables; Amendment 2 |
| IEC 60092-359-1987 | 船舶電氣設施 第359部分:船用電力電纜和通信電纜用護套材料 | Electrical installations in ships. Part 359 : Sheathing materials for shipboard power and telecommunication cables |
| IEC 60092-501-2007 | 船用電氣裝置.第501部分:專用裝置.電力推進裝置 | Electrical installations in ships - Part 501: Special features - Electric propulsion plant |
| IEC 60110-1-1998 | 感應加熱裝置用電力電容器 第1部分:總則 | Power capacitors for induction heating installations - Part 1: General |
| IEC 60143-1-2004 | 電力系統用串聯電容器.第1部分:總則 | Series capacitors for power systems - Part 1: General |
| IEC 60143-1992 | 電力系統用串聯電容器 | Series capacitors for power systems |
| IEC 60143-2-1994 | 電力系統用串聯電容器 第2部分:串聯電容組用保護設備 | Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks |
| IEC 60143-3-1998 | 電力系統用串聯電容器 第3部分:內部熔絲 | Series capacitors for power systems - Part 3: Internal fuses |
| IEC 60152-1963 | 用小時數標識三相電力系統的相導線 | Identification by hour numbers of the phase conductors of 3-phase electric systems |
| IEC 60255-24-2001 | 電氣繼電器 第24部分：電力系統瞬態數據交換的通用格式（COMTRADE） | Electrical relays - Part 24: Common format for transient data exchange (COMTRADE) for power systems |
| IEC 60287-3-2 AMD 1-1996 | 電纜 電流定額的計算 第3部分:運行條件的章節 第2節:電力電纜尺寸最佳經濟選擇 修改1 | Electric cables - Calculation of the current rating - Part 3: Sections on operating conditions - Section 2: Economic optimization of power cable size; Amendment 1 |
| IEC 60287-3-2-1995 | 電纜 電流定額的計算 第3部分:運行條件的章節 第2節:電力電纜尺寸最佳經濟選擇 | Electric cables - Calculation of the current rating - Part 3: Sections on operating conditions - Section 2: Economic optimization of power cable size |
| IEC 60322-2001 | 鐵路應用 機車車輛的電氣設備 開敞式結構電力電阻器的規則 | Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction |
| IEC 60349-1 AMD 1-2002 | 電力牽引.鐵路與道路車輛用旋轉電機.第1部分:除電子交流器供電的交流電動機之外的旋轉電機.修改1 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors; Amendment 1 |
| IEC 60349-1 Edition 1.1-2002 | 電力牽引.鐵路與道路車輛用旋轉電機.第1部分:除電子變流器供電的交流電動機之外的旋轉電機 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors |
| IEC 60349-1-1999 | 電力牽引 鐵路與道路車輛用旋轉電機 第1部分:除電子變流器供電的交流電動機之外的旋轉電機 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors |
| IEC 60349-2-2002 | 電力牽引.鐵路與道路車輛用旋轉電機.第2部分:電子變流器供電的交流電動機 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic convertor-fed alternating current motors |
| IEC 60353-1989 | 交流電力系統用線路阻波器 | Line traps for a.c. power systems |
| IEC 60439-5 Edition 1.1-1998 | 低壓開關設備和控制設備組件.第5部分:公共場所室外安裝的組件的特殊要求.網絡電力配電用電纜分配箱 | Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) for power distribution in networks |
| IEC 60439-5-2006 | 低壓開關設備和控制設備組件.第5部分:公共網上電力分配用組件的特殊要求 | Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies for power distribution in public networks |
| IEC 60481-1974 | 電力線載波系統的耦合裝置 | Coupling devices for power line carrier systems |
| IEC 60495-1993 | 單邊帶電力線載波終端 | Single sideband power-line carrier terminals |
| IEC 60502-1-2004 | 額定電壓1～30kV擠壓絕緣電力電纜及其附件.第1部分:額定電壓1kV(Um=1.2kV)和3kV(Um=3.6kV)的電纜 | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U<(Index)m> = 1,2 kV) up to 30 kV (U<(Index)m> = 36 kV) - Part 1: Cables for rated voltages of 1 kV (U<(Index)m> = 1,2 kV) and 3 kV (U<(Index)m> = 3,6 kV) |
| IEC 60502-2-2005 | 額定電壓從1kV(Um=1.2kV)到30kV(Um=36kV)的擠壓絕緣電力電纜及其附件.第2部分:額定電壓從6kV(Um=7.2kV)到30 | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U<(Index)m> = 1,2 kV) up to 30 kV (U<(Index)m> = 36 kV) - Part 2: Cables for rated voltages from 6 kV (U<(Index)m> = 7,2 kV) up to 30 kV (U<(Index)m> = 36 kV) |
| IEC 60502-4-2005 | 額定電壓從1kV(Um=1.2kV)到30kV(Um=36kV)的擠壓絕緣電力電纜及其附件.第4部分:額定電壓從6kV(Um=7.2kV)到30 | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U<(Index)m> = 1,2 kV) up to 30 kV (U<(Index)m> = 36 kV) - Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (U<(Index)m> = 7,2 kV) up to 30 kV (U<(Index)m> = 36 kV) |
| IEC 60549-1976 | 并聯電力電容器外部保護用高壓熔斷器 | High-voltage fuses for the external protection of shunt power capacitors |
| IEC 60663-1980 | 單邊帶電力線載波系統的設計 | Planning of (single-sideband) power line carrier systems |
| IEC 60700-1 AMD 1-2003 | 高壓直流(HVDC)電力傳輸用可控硅閥門.第1部分:電氣試驗.修改件1 | Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing; Amendment 1 |
| IEC 60700-1 AMD 2-2008 | 高壓直流電(HVDC)電力傳輸用半導體閘流管閥.第1部分:電氣測試 | Thyristor valves for high-voltage direct current (HVDC) power transmission - Part 1: Electrical testing |
| IEC 60700-1 Edition 1.1-2003 | 高壓直流(HVDC)電力傳輸用可控硅閥.第1部分:電氣試驗 | Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing |
| IEC 60728-7-3-2003 | 電視信號、聲音信號和交互信號設備用電纜網絡.第7-3部分:混合光纖同軸電纜外部線纜狀況監測.電力轉發器接口 | Cable networks for television signals, sound signals and interactive services - Part 7-3: Hybrid Fibre Coax Outside Plant Status Monitoring; Power supply to transponder interface bus (PSTIB) specification |
| IEC 60730-2-14 AMD 2-2007 | 家用和類似用途的自動控制裝置.第2-14部分:電力傳動裝置的特殊要求 | Automatic controls for household and similar use - Part 2-14: Particular requirements for electric actuators |
| IEC 60747-15-2003 | 半導體分立器件.第15部分：孤立的電力半導體器件 | Discrete semiconductor devices - Part 15: Isolated power semiconductor devices |
| IEC 60747-8-4-2004 | 半導體分立器件.第8-4部分:電力開關裝置用金屬氧化物半導體場效應晶體管(MOSFETs) | Discrete semiconductor devices - Part 8-4: Metal-oxide-semiconductor field-effect transistors (MOSFETs) for power switching applications |
| IEC 60749-34-2005 | 半導體器件.機械和氣候試驗方法.第34部分:電力循環 | Semiconductor devices - Mechanical and climatic test methods - Part 34: Power cycling |
| IEC 60794-4-10-2006 | 光纜.第4-10部分:沿著電力線的架空光學電纜.OPGW的系列規范（光學地線） | Optical fibre cables - Part 4-10: Aerial optical cables along electrical power lines - Family specification for OPGW (Optical Ground Wires) |
| IEC 60831-1 AMD 1-2002 | 額定電壓1000V及以下交流系統用自愈式并聯電力電容器.第1部分:總則.性能,試驗和定額.安全要求.安裝及運行導 | Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 1: General; Performance, testing and rating; Safety requirements; Guide for installation and operation; Amendment 1 |
| IEC 60831-1 Edition 2.1-2002 | 額定電壓1000V及以下交流系統用自愈式并聯電力電容器.第1部分:總則.性能、試驗和定額.安全要求.安裝及操作 | Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 1: General; Performance, testing and rating; Safety requirements; Guide for installation and operation |
| IEC 60831-1-1996 | 額定電壓1000V及以下交流系統用自愈式并聯電力電容器 第1部分:總則 性能、試驗和定額 安全要求 安裝和運行 | Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation |
| IEC 60831-2-1995 | 額定電壓1000v及以下交流系統用自愈式并聯電力電容器 第2部分:老化試驗、自愈試驗和破壞試驗 | Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 2: Ageing test, self-healing test and destruction test |
| IEC 60834-1-1999 | 電力系統遠方保護設備 性能和試驗 第1部分:指令系統 | Teleprotection equipment of power systems - Performance and testing - Part 1: Command systems |
| IEC 60834-2-1993 | 電力系統遠方保護設備的性能和試驗 第2部分:模擬比較系統 | Performance and testing of teleprotection equipment of power systems; part 2: analogue comparison systems |
| IEC 60840-2004 | 額定電壓為30KV(Um=36KV)以上至150KV(Um=170KV)以下的擠壓絕緣的電力電纜及其附件.要求和試驗方法 | Power cables with extruded insulation and their accessories for rated voltages above 30 kV (U<(Index)m> = 36 kV) up to 150 kV (U<(Index)m> = 170 kV) - Test methods and requirements |
| IEC 60870-5-102-1996 | 遠動設備和系統 第5部分:傳輸規約 第102節:電力系統中累計總量傳輸?shù)呐涮讟?biāo)準 | Telecontrol equipment and systems - Part 5: Transmission protocols - Section 102: Companion standard for the transmission of integrated totals in electric power systems |
| IEC 60871-1-2005 | 額定電壓1000V以上交流電力系統用并聯電容器.第1部分:總則 | Shunt capacitors for a.c. power systems having a rated voltage above 1000 V - Part 1: General |
| IEC 60871-4-1996 | 額定電壓1000V以上交流電力系統用并聯電容器 第4部分:內部熔絲 | Shunt capacitors for a.c. power systems having a rated voltage above 1000 V - Part 4: Internal fuses |
| IEC 60885-3-1988 | 電纜的電氣試驗方法 第3部分:測量擠壓電力電纜段局部放電的試驗方法 | Electrical test methods for electric cables; part 3: test methods for partial discharge measurements on lengths of extruded power cable |
| IEC 60913-1988 | 電力牽引架空線路 | Electric traction overhead lines |
| IEC 60931-1 AMD 1-2002 | 額定電壓1000V及以下的交流系統用非自愈式并聯電力電容器.第1部分:總則.性能、試驗和定額.安全要求.安裝和 | Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 1: General; Performance, testing and rating; Safety requirements; Guide for installation and operation; Amendment 1 |
| IEC 60931-1-1996 | 額定電壓1000V及以下交流系統用非自愈式并聯電力電容器 第1部分:總則 性能、試驗和定額值 安全要求 安裝和 | Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation |
| IEC 60931-2-1995 | 額定電壓1000V及以下交流系統用非自愈式并聯電力電容器 第2部分:老化試驗和破壞試驗 | Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 2: Ageing test and destruction test |
| IEC 60931-3-1996 | 額定電壓1000V及以下交流系統用非自愈式并聯電力電容器 第3部分:內部熔絲 | Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 3: Internal fuses |
| IEC 61000-4-17 AMD 1-2001 | 電磁兼容性(EMC) 第4-17部分:試驗和測量技術 直流輸入電力端口上的紋 抗擾度試驗 修改1 | Electromagnetic compatibility (EMC) - Part 4-17: Testing and measuring techniques; Ripple on d.c. input power port immunity test; Amendment 1 |
| IEC 61000-4-17 AMD 2-2008 | 電磁兼容性(EMC).第4-17部分:測試和測量技術.直流輸入電力端口上波紋抗擾度試驗.修改件2 | Electromagnetic compability (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test; Amendment 2 |
| IEC 61000-4-17-1999 | 電磁兼容性(EMC) 第4-17部分:試驗和測量技術 直流輸入電力端口上的紋 抗擾度試驗 | Electromagnetic compatibility (EMC) - Part 4-17: Testing and measuring techniques - Ripple on d.c. input power port, immunity test |
| IEC 61000-4-28 AMD 1-2001 | 電磁兼容性(EMC) 第4-28部分:試驗和測量技術 電力頻率變化、抗擾度試驗 修改1 | Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase; Amendment 1 |
| IEC 61000-4-28-1999 | 電磁兼容性(EMC).第4-28部分:試驗和測量技術.輸入電流不超過每相16A的設備用電力頻率變化和抗擾度試驗 | Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase |
| IEC 61000-4-29-2000 | 電磁兼容性(EMC) 第4-29部分:試驗和測量技術 直流輸入電力端口上的電壓暫降、短時中斷和電壓變化抗擾度試驗 | Electromagnetic compatibility (EMC) - Testing and measurement techniques; Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
| IEC 61071-1-1991 | 電力電子電容器 第1部分:總則 | Power electronic capacitors; part 1: general |
| IEC 61071-2007 | 電力電容器 | Capacitors for power electronics |
| IEC 61148 Corrigendum 1-1995 | 閥器件堆和組合裝置以及電力變流設備的端子標記 | Terminal markings for valve device stacks and assemblies and for power convertor equipment; Corrigendum 1 |
| IEC 61148-1992 | 閥器件堆和組合裝置以及電力變流設備的端子標記 | Terminal markings for valve device stacks and assemblies and for power convertor equipment |
| IEC 61238-1-2003 | 額定電壓30KV(U<指數m>=36 kV)電力電纜用壓接和機械連接器.第1部分:試驗方法和要求 | Compression and mechanical connectors for power cables for rated voltages up to 30 kV (U<(Index)m>=36 kV) - Part 1: Test methods and requirements |
| IEC 61287-1-2005 | 鐵路設施.安裝在鐵路機車上的電力變流器.第1部分:特性和試驗方法 | Railway applications - Power convertors installed on board rolling stock - Part 1: Characteristics and test methods |
| IEC 61442-2005 | 額定電壓6-30kV(Um=7.2-36kV)的電力電纜附件的試驗方法 | Test methods for accessories for power cables with rated voltages from 6 kV (U<(Index)m> = 7,2 kV) up to 30 kV (U<(Index)m> = 36 kV) |
| IEC 61523-1-2001 | 延遲和電力計算標準 第1部分：集成電路延遲系統和電力計算系統 | Delay and power calculation standards - Part 1: Integrated circuit delay and power calculation systems |
| IEC 61523-3-2004 | 延遲和電力計算標準.第3部分:電子設計過程用標準延遲格式(SDF) | Delay and power calculation standards - Part 3: Standard Delay Format (SDF) for the electronic design process |
| IEC 61558-1 AMD 1-2009 | 電力變壓器、電源、電抗器及類似設備的安全性.第1部分:一般要求和試驗.修改件1 | Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests; Amendment 1 |
| IEC 61558-1 Corrigendum 1-2008 | 電力變壓器、電源、電抗器和類似產品的安全性.第1部分:一般要求和試驗.勘誤1 | Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests; Corrigendum 1 |
| IEC 61558-1 Interpretation Sheet 1-2003 | 電力變壓器、電源裝置及類似設備的安全.第1部分:一般要求和試驗.注釋單1 | Safety of power transformers, power supply units and similar - Part 1: General requirements and tests; Interpretation sheet 1 |
| IEC 61558-1-2005 | 電力變壓器、電源裝置、電抗器及類似設備的安全.第1部分:一般要求和試驗 | Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests |
| IEC 61558-2-1-2007 | 電力變壓器、電源裝置及類似設備的安全.第2-1部分:一般設備用分立變壓器和與分立變壓器組合電源的特殊要求 | Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications |
| IEC 61558-2-12-2001 | 電力變壓器、電源裝置及類似設備的安全 第2-12部分：恒變壓器的特殊要求 | Safety of power transformers, power supply units and similar devices - Part 2-12: Particular requirements for constant voltage transformers |
| IEC 61558-2-15-1999 | 電力變壓器、電源裝置及類似設備的安全 第2-15部分:醫療場所供電用隔離變壓器的特殊要求 | Safety of power transformers, power supply units and similar - Part 2-15: Particular requirements for isolating transformers for the supply of medical locations |
| IEC 61558-2-17-1997 | 電力變壓器、電源裝置及類似設備的安全 第2-17部分:開關模式電源變壓器的特殊要求 | Safety of power transformers, power supply units and similar - Part 2: Particular requirements for transformers for switch mode power supplies |
| IEC 61558-2-19-2000 | 電力變壓器、電源裝置及類似設備的安全 第2-19部分:擾動衰減變壓器的特殊要求 | Safety of power transformers, power supply units and similar devices - Part 2-19: Particular requirements for perturbation attenuation transformers |
| IEC 61558-2-2-2007 | 電力變壓器、電源、電抗器和類似產品的安全.第2-2部分:控制變壓器和與控制變壓器組合電源的特殊要求和試驗 | Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporationg control transformers |
| IEC 61558-2-20-2000 | 電力變壓器、電源裝置及類似設備的安全 第2-20部分:小型電抗器的特殊要求 | Safety of power transformers, power supply units and similar devices - Part 2-20: Particular requirements for small reactors |
| IEC 61558-2-23-2000 | 電力變壓器、電源裝置及類似設備的安全 第2-23部分:建筑工地用變壓器的特殊要求 | Safety of power transformers, power supply units and similar devices - Part 2-23: Particular requirements for transformers for construction sites |
| IEC 61558-2-3-1999 | 電力變壓器、電源裝置及類似設備的安全 第2-3部分:燃?xì)夂腿加忘c(diǎn)火變壓器的特殊要求 | Safety of power transformers, power supply units and similar devices - Part 2-3: Particular requirements for ignition transformers for gas and oil burners |
| IEC 61558-2-5-1997 | 電力變壓器、電源裝置及類似設備的安全 第2-5部分:剃須刀變壓器和剃刀電源裝置的特殊要求 | Safety of power transformers, power supply units and similar - Part 2-5: Particular requirements for shaver transformers and shaver supply units |
| IEC 61558-2-7-2007 | 電力變壓器、電源、電抗器和類似產品的安全.第2-7部分:玩具用變壓器和電源的特殊要求和試驗 | Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys |
| IEC 61558-2-8-1998 | 電力變壓器、電源裝置及類似設備的安全 第2-8部分:電鈴和電鬧鐘變壓器的特殊要求 | Safety of small power transformers, power supply units and similar - Part 2-8: Particular requirements for bell and chime transformers |
| IEC 61558-2-9-2002 | 電力變壓器、供電設備及類似設備的安全.第2-9部分:Ⅲ類手用鎢絲燈的壓變壓器的特殊要求 | Safety of power transformers, power supply units and similar products - Part 2-9: Particular requirements for transformers for class III handlamps for tungsten filament lamps |
| IEC 61800-1-1997 | 可調速電力傳動系統 第1部分:一般要求 低壓可調速直流電力傳動系統的定額規范 | Adjustable speed electrical power drive systems - Part 1: General requirements - Rating specifications for low voltage adjustable speed d.c. power drive systems |
| IEC 61800-2-1998 | 可調速電力傳動系統 第2部分:一般要求 低壓可調頻交流電力傳動系統的定額規范 | Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable frequency a.c. power drive systems |
| IEC 61800-3-2004 | 可調速電力傳動系統 第3部分:電磁兼容要求和特定試驗方法 | Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods |
| IEC 61800-5-1-2007 | 可調速電力傳動系統.第5-1部分:安全要求.電、熱和能量 | Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy |
| IEC 61800-7-1-2007 | 可調速電力傳動系統.第7-1部分:通用接口和電力驅動系統斷面的使用.接口定義 | Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition |
| IEC 61800-7-201-2007 | 可調速電力傳動系統.第7-201部分:電力傳動系統用剖面圖的使用和通用接口.1型剖面圖的規范 | Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification |
| IEC 61800-7-202-2007 | 可調速電力傳動系統.第7-202部分:電力傳動系統用剖面圖的使用和通用接口.2型剖面圖的規范 | Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification |
| IEC 61800-7-203-2007 | 可調速電力傳動系統.第7-203部分:電力傳動系統用剖面圖的使用和通用接口.3型剖面圖的規范 | Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification |
| IEC 61800-7-204-2007 | 可調速電力傳動系統.第7-204部分:電力傳動系統用剖面圖的使用和通用接口.4型剖面圖的規范 | Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems - Profile type 4 specification |
| IEC 61800-7-301-2007 | 可調速電源驅動系統.第7-301部分:電力傳動系統用剖面圖的使用和通用接口.1型剖面圖映射到網絡技術 | Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profiles type 1 to network technologies |
| IEC 61800-7-302-2007 | 可調速電源驅動系統.第7-302部分:電力傳動系統用剖面圖的使用和通用接口.2型剖面圖映射到網絡技術 | Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profiles type 2 to network technologies |
| IEC 61800-7-303-2007 | 可調速的電驅動系統.第7-303部分:電力傳動系統用剖面圖的使用和通用接口.3型剖面圖映射到網絡技術 | Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profiles type 3 to network technologies |
| IEC 61800-7-304-2007 | 可調速電源驅動系統.第7-304部分:電力傳動系統用剖面圖的使用和通用接口.4型剖面圖映射到網絡技術 | Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profiles type 4 to network technologies |
| IEC 61850-7-410-2007 | 電力多用途自動控制的通信網絡和系統.第7-410部分:水力發電站.監測和控制用通信 | Communication networks and systems for power utility automation - Part 7-410: Hydroelectric power plants - Communication for monitoring and control |
| IEC 61881-1999 | 鐵路應用 機車車輛設備 電力電子設備用電容器 | Railway applications - Rolling stock equipment - Capacitors for power electronics |
| IEC 61921-2003 | 電力電容器.低壓電力因數校正裝置組 | Power capacitors - Low-voltage power factor correction banks |
| IEC 61936-1-2002 | 交流電壓大于1kV的電力裝置.第1部分:通用規則 | Power installations exceeding 1 kV a.c. - Part 1: Common rules |
| IEC 61954 AMD 1-2003 | 送電和配電系統用電力電子設備.靜態變量補償器用可控硅閥門的試驗.修改件1 | Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators; Amendment 1 |
| IEC 61954 Corrigendum 1-1999 | 輸電和配電系統用電力電子設備.靜態無功功率補償器用晶閘管閥的試驗 | Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators |
| IEC 61954 Edition 1.1-2003 | 輸電和配電用電力電子裝置.靜態變量補償器用可控硅閥的試驗 | Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators |
| IEC 61954-1999 | 輸電和配電系統用電力電子設備 靜態無功功率補償器用晶閘管閥的試驗 | Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators |
| IEC 62041-2003 | 電力變壓器、電源裝置、電抗器和類似產品.電磁兼容性要求 | Power transformers, power supply units, reactors and similar products - EMC requirements |
| IEC 62067 AMD 1-2006 | 修改件1.額定電壓150KV（Um=170KV）以上且小于500KV（Um=550KV）的擠壓絕緣電力電纜及其附件.試驗方法和要 | Amendment 1 - Power cables with extruded insulation and their accessories for rated voltages above 150 kV (U<(Index)m> = 170 kV) up to 500 kV (U<(Index)m> = 550 kV) - Test methods and requirements |
| IEC 62067 Edition 1.1-2006 | 額定電壓150千伏以上(Um=170KV)至500千伏(Um=550KV)的擠包絕緣電力電纜及其附件.試驗方法和要求 | Power cables with extruded insulation and their accessories for rated voltages above 150 kV (U<(Index)m> = 170 kV) up to 500 kV (U<(Index)m> = 550 kV) - Test methods and requirements |
| IEC 62067-2001 | 額定電壓150KV（Um=170KV）以上至500KV（Um=550KV）的擠包絕緣電力電纜及其附件 試驗方法和要求 | Power cables with extruded insulation and their accessories for rated voltages above 150 kV (U<(Index)m> = 170 kV) up to 500 kV (U<(Index)m> = 550 kV) - Test methods and requirements |
| IEC 62103-2003 | 電力裝置用電子設備 | Electronic equipment for use in power installations |
| IEC 62391-2-1-2006 | 電子設備用雙層固定電容器.第2-1部分:空白詳細規范.電力應用的雙層電容器.評定等級EZ | Fixed electric double-layer capacitors for use in electronic equipment - Part 2-1: Blank detail specification - Electric double-layer capacitors for power application - Assessment level EZ |
| IEC 62391-2-2006 | 電子設備用雙層固定電容器.第2部分:分規范:電力應用的雙層電容器 | Fixed electric double layer capacitors for use in electronic equipment - Part 2: Sectional specification: Electric double layer capacitors for power application |
| IEC 62428-2008 | 電力工程.三相交流系統用典型部件.量和變換 | Electric power engineering - Modal components in three-phase a.c. systems - Quantities and transformations |
| IEC 88528-11-2004 | 往復式內燃機驅動交流發電機組.第11部分:旋轉的不間斷電力系統.性能要求和試驗方法 | Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods |
| IEC 9/1135/CD-2008 | 電力牽引.鐵路和道路車輛用旋轉電機.第3部分:用組件損耗總和測定變流器供電交流電動機的總損耗 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of converter-fed alternating current motors by summation of the component losses |
| IEC/TR 60616-1978 | 電力變壓器端子和分接標志 | Terminal and tapping markings for power transformers |
| IEC/TR 60725-2005 | 測定每相位額定電流為75安培的電氣設備的干擾特性時用的基準阻抗和公共電力供應網阻抗的考慮 | Considerations of reference impedances and public supply network impedances for use in determining the disturbance characteristics of electrical equipment having a rated current 75 A per phase |
| IEC/TR 61000-2-14-2006 | 電磁兼容性(EMC).第2-14部分:環境.公共電力配置網絡的過電壓特性 | Electromagnetic compatibility (EMC) - Part 2-14: Environment - Overvoltages on public electricity distribution networks |
| IEC/TR 61000-2-8-2002 | 電磁兼容性(EMC).第2-8部分:環境.有統計測量結果的公共電力供應系統的電壓驟降和短時干擾 | Electromagnetic compatibility (EMC) - Part 2-8: Environment; Voltage dips and short interruptions on public electric power supply systems with statistical measurement results |
| IEC/TR 61800-6-2003 | 可調速電力驅動系統.第6部分:負載類型和相應電流額定值的測定指南 | Adjustable speed electrical power drive systems - Part 6: Guide for determination of types of load duty and corresponding current ratings |
| IEC/TR 62263-2005 | 帶電作業.架空電力線路上光纜的安裝和維修指南 | Live working - Guidelines for the installation and maintenance of optical fibre cables on overhead power lines |
| IEC/TR 62357-2003 | 電力系統控制和相關通信.目標模型、服務設施和協議用參考體系結構 | Power system control and associated communications - Reference architecture for object models, services and protocols |
| IEC/TR2 60349-3-1995 | 電力牽引 鐵路和道路車輛用旋轉電機 第3部分:用組件損耗總和確定變流器供電的交流電動機的總損耗 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of convertor-fed alternating current motors by summation of the component losses |
| IEC/TR2 60816-1984 | 低壓電力線和信號線上短時瞬態的測量方法指南 | Guide on methods of measurement of short duration transients on low voltage power and signal lines. |
| IEC/TR2 60871-3-1996 | 額定電壓1000V以上交流電力系統用并聯電容器 第3部分:并聯電容器和并聯電容器組的保護 | Shunt capacitors for a.c. power systems having a rated voltage above 1000 V - Part 3: Protection of shunt capacitors and shunt capacitor banks |
| IEC/TR2 61071-2-1994 | 電力電子電容器 第2部分:熔絲隔離試驗、破壞試驗、自愈試驗和耐久性試驗的要求 | Power electronic capacitors - Part 2: Requirements for disconnecting test on fuses, destruction test, self-healing test and endurance test |
| IEC/TR2 61085-1992 | 電力系統通信業務的一般考慮 | General considerations for telecommunication services for electric power systems |
| IEC/TR2 61639-1996 | 額定電壓72 5kV及以上氣體絕緣金屬封閉開關設備和電力變壓器之間的直接連接 | Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above |
| IEC/TS 60076-14-2004 | 電力變壓器.第14部分:使用高溫絕緣材料的液浸式電力變壓器的設計和應用 | Power transformers - Part 14: Design and application of liquid-immersed power transformers using high-temperature insulation materials |
| IEC/TS 60110-2-2000 | 感應加熱裝置用電力電容器 第2部分:老化試驗、破壞試驗和隔離內部熔絲的要求 | Power capacitors for induction heating installations - Part 2: Ageing test, destruction test and requirements for disconnecting internal fuses |
| IEC/TS 60871-2-1999 | 額定電壓1000V以上交流電力系統用并聯電容器 第2部分:耐久性試驗 | Shunt capacitors for a.c. power systems having a rated voltage above 1000 V - Part 2: Endurance testing |
| IEC/TS 61287-2-2001 | 安裝在鐵路機車車輛上的電力變流器 第2部分：增補技術信息 | Power convertors installed on board rolling stock - Part 2: Additional technical information |
| IEC/TS 62257-9-1-2008 | 農村電氣化用小型可再生能源和混合系統的建議.第9-1部分:微型電力系統 | Recommendations for small renewable energy and hybrid systems for rural electrification - Part 9-1: Micropower systems |
| IEC/TS 62351-2-2008 | 電力系統管理和相關信息交換.數據和通信安全.第2部分:術語表 | Power systems management and associated information exchange - Data and communications security - Part 2: Glossary of terms |
| ISO 16750-2-2006 | 道路車輛.電氣和電子設備的環境條件和試驗.第2部分:電力負載 | Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads |
| ISO 7176-14-2008 | 輪椅.第14部分:電動輪椅和單腳滑行車的電力控制系統.要求和試驗方法 | Wheelchairs - Part 14: Power and control systems for electrically powered wheelchairs and scooters - Requirements and test methods |
| ISO/IEC TR 24746-2005 | 信息技術.用戶房屋用一般布線.中跨DTE電力插件 | Information technology - Generic cabling for customer premises - Mid-span DTE power insertion |
| ISO/TR 12369 AMD 1-1999 | 農業拖拉機和機械 電力傳輸連接器 修改1 | Agricultural tractors and machinery - Electric power transmission connector; Amendment 1 |
| ISO/TR 12369-1994 | 農業拖拉機和機械 電力傳輸連接器 | Agricultural tractors and machinery - Electrical power transmission connectors |
| ISO/TS 28923-2007 | 農業機械.電力傳輸移動部件防護裝置.用工具開的防護裝置 | Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool |
| ISO/TS 28924-2007 | 農業機械.電力傳輸移動部件防護裝置.不用工具開的防護裝置 | Agricultural machinery - Guards for moving parts of power transmission - Guard opening without tool |
| 編號 | 中文名稱 | 英文名稱 |