| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 11832-1-1990 | 農場和牲畜飼養設備.輸送液態糞肥的管道用閥門管件.第1部分:最大1巴的靜壓力閘閥 | Farm and livestock husbandry equipment; shut-off valves for slurry pipes; gate valves for static pressure of max. 1 bar |
| DIN 11860-1954 | 乳品機械.壓力接頭用鉤形扳手 | Dairying machines; hook spanners for compression fittings |
| DIN 12001-1-1987 | 實驗室安全標記.第1部分:壓力鋼瓶 | Safety markings in laboratories; pressure cylinders |
| DIN 1314-1977 | 壓力；基本定義、單位 | Pressure; Basic Definitions, Units |
| DIN 14152-1-1989 | 最大工作壓力為 0.5 巴 或 1巴 的浮力氣墊.第1部分:要求、檢驗 | Pneumatic lifting cushions for max. working pressures 0,5 or 1 bar; requirements, testing |
| DIN 14301-1985 | 標稱壓力為16的D型供水和吸水用鋁合金聯接器 | Aluminium alloy delivery and suction coupling type D; nominal pressure |
| DIN 14302-1985 | 標稱壓力為16的C型供水鋁合金聯接器 | Aluminium alloy delivery coupling type C; nominal pressure 16 |
| DIN 14303-1985 | 標稱壓力為16、B型供水鋁合金聯接器 | Aluminium alloy delivery coupling type B; nominal pressure 16 |
| DIN 14306-1986 | 壓力和抽吸用的鋁合金D型剛性聯軸節PN16 | Aluminium alloy solid coupling type D for pressure and suction purposes; nominal pressure 16 |
| DIN 14307-1-1985 | 帶壓力用密封圈的鋁合金C型剛性聯接器.標稱壓力16 | Aluminium alloy solid coupling type C, with sealing ring for pressure purposes; nominal pressure 16 |
| DIN 14307-2-1986 | 抽吸用C型、標稱壓力16帶密封圈的鋁合金剛性接頭 | Aluminium alloy solid coupling type C with sealing ring for suction purposes; nominal pressure 16 |
| DIN 14308-1-1985 | 帶壓力用密封圈的鋁合金B(yǎng)型剛性聯接器.標稱壓力16 | Aluminium alloy solid coupling type B, with sealing ring for pressure purposes; nominal pressure 16 |
| DIN 14308-2-1986 | 抽吸用B型、標稱壓力16帶密封圈的鋁合金剛性接頭 | Aluminium alloy solid coupling type B with sealing ring for suction purposes; nominal pressure 16 |
| DIN 14309-1985 | 標稱壓力為16帶壓力吸水密封環的A型鋁合金聯接器 | Aluminium alloy solid coupling type A, with sealing ring for pressure and suction purposes; nominal pressure 16 |
| DIN 14310-1986 | 壓力和抽吸用的鋁合金制有蓋板的滅火水龍帶D型聯軸節：公稱壓力PN16 | Aluminium alloy cap fire hose coupling typ D for pressure and suction purposes; nominal pressure 16 |
| DIN 14311-1985 | 標稱壓力為16抽吸和壓力用鋁合金消防水龍帶C型管接頭 | Aluminium alloy cap fire hose coupling type C, for pressure and suction purposes; nominal pressure 16 |
| DIN 14312-1985 | 標稱壓力為16、壓力吸水用消防軟管B型鋁合金聯接器 | Aluminium alloy cap fire hose coupling type B, for pressure and suction purposes; nominal pressure 16 |
| DIN 14313-1989 | 壓水和抽水用鋁合金制A型盲板消防聯接器.公稱壓力 16 | Aluminium alloy cap fire hose coupling type A for pressure and suction purposes; nominale pressure 16 |
| DIN 14317-1985 | 標稱壓力為16、帶金屬密封面和灰鑄鐵或鋁合金蓋的C型鋁合金剛性聯接器 | Aluminium alloy solid coupling type C with metallic sealing area and with cast iron cover or with aluminium alloy cover, type C; nominal pressure 16 |
| DIN 14319-1985 | 鋁合金帶金屬密封面和灰鑄鐵或鋁合金蓋的A型固定聯接器.公稱壓力 16 | Aluminium alloy solid coupling type A with metallic sealing area and with cast iron or with aluminium alloy cover, type A; nominal pressure 16 |
| DIN 14321-1985 | 標稱壓力為16、C型抽水鋁合金聯接器 | Aluminium alloy suction coupling type C; nominal pressure 16 |
| DIN 14323-1985 | 標稱壓力為16、A型供水和抽水用鋁合金聯接器 | Aluminium alloy delivery and suction coupling type A; nominal pressure 16 |
| DIN 14330-1-1985 | S 28 消防軟管用標稱壓力PN16 C型鋁合金聯軸器 | Aluminium alloy delivery coupling type C; nominal pressure 16, used for fire hoses S 28 |
| DIN 14330-2-1985 | S 38 消防軟管用標稱壓力PN16 C型鋁合金聯軸器 | Aluminium alloy delivery coupling type C; nominal pressure 16, used for fire hoses S 32 |
| DIN 14332-1986 | 輸送管路的C型鋁合聯接器.公稱壓力16 .用于 C42 消防軟管 | Aluminium alloy delivery coupling type C; nominal pressure 16; used for fire hoses C 42 |
| DIN 14341-1986 | 標稱壓力為16的 鋁合金C-D型轉接接頭 | Aluminium alloy C-D-adaptor for nominal pressure 16 |
| DIN 14342-1986 | 標稱壓力為16的 鋁合金B(yǎng)-C型轉接接頭 | Aluminium alloy B-C-adaptor for nominal pressure 16 |
| DIN 14343-1986 | 標稱壓力為16 的鋁合金A-B型轉接接頭 | Aluminium alloy A-B-adaptor for nominal pressure 16 |
| DIN 14345-1978 | 標稱壓力16的三頭分配器 | Triple head distributor, nominal pressure 16 |
| DIN 14368-1985 | 標稱壓力為16的支管管座 | Branchpipe-holder for nominal pressure 16 |
| DIN 14375-1-1979 | 標稱壓力PN16、雙排氣口、豎儲水管 | Double outlet standpipes, nominal pressure 16 |
| DIN 14380-1978 | 標稱壓力為16的壓力限制閥 | Pressure limitation valve, nominal pressure 16 |
| DIN 14381-1999 | B型PN 16 自鎖緊壓力閥 | Pressure valve type B PN 16, self-locking |
| DIN 14420-2002 | 消防泵.消防離心泵.消防車在安裝真空面和壓力面組件后的試驗要求 | Fire-fighting pumps - Fire-fighting centrifugal pumps - Requirements for the suction-sided and pressure-sided assembly, test after installation in the fire-fighting vehicle |
| DIN 14421-2001 | 消防泵用壓力表(測壓表) | Pressure gauges (manometer) for fire pumps |
| DIN 14461-3-2006 | 消防用輸送閥裝置.第3部分:標定壓力PN16的水龍帶連接閥 | Delivery valve installations for firefighting purposes - Part 3: Fire hose valves for nominal pressure PN 16 |
| DIN 16085-1995 | 電動有限接點裝置的壓力量規 | Pressure gauges with electrical limit contact devices |
| DIN 16086-2006 | 電動壓力測量?jī)x器.壓力傳感器、壓力測量?jī)x.數據單的概念、規范 | Electrical pressure measuring instruments - Pressure transmitters, pressure measuring instruments - Concepts, specifications on data sheets |
| DIN 16261-2004 | 壓力表用帶內螺紋/內螺紋和內螺紋/外螺紋連接的PN 16旋塞 | PN 16 cocks with female/female and female/male connection for pressure gauges |
| DIN 16262-2004 | 壓力表用帶調節螺母和軸套式連接的PN 6和PN 16旋塞 | PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges |
| DIN 16263-2004 | 壓力表用帶調節螺母、軸套式連接和試驗連接的PN 16旋塞 | PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges |
| DIN 16270-2004 | 壓力表用不帶試驗連接的PN 250和PN 400閥門 | PN 250 and PN 400 valves without test connection for pressure gauges |
| DIN 16271-2004 | 壓力表用帶試驗連接的PN 250和PN 400閥門 | PN 250 and PN 400 valves with test connection for pressure gauges |
| DIN 16272-2004 | 壓力表用帶關閉試驗連接的PN 250和PN 400閥門 | PN 250 and PN 400 valves with shut-off test connection for pressure gauges |
| DIN 16282-2004 | 壓力表及其附件用彎管 | Siphons for pressure gauges and their accessories |
| DIN 16283-2004 | 壓力表及其附件用調整螺母 | Adjusting nuts for pressure gauges and their accessories |
| DIN 16284-2004 | 壓力表及其附件用螺紋接套連接 | Nipple connections for pressure gauges and their accessories |
| DIN 16287-2004 | 壓力表用閥門和旋塞的試驗連接用蓋 | Caps for test connection on valves and cocks for pressure gauges |
| DIN 16450-1994 | 未增朔聚氯乙烯壓力管道的套管接頭.符號 | Socket-fittings for pressure piping of unplasticized polyvinylchloride (PVC-U); symbols |
| DIN 16831-1-2003 | 聚(異)丁烯壓力管道用管道配件和連接組件.PB 125型.第1部分:承插焊接用注模肘管尺寸 | Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 1: Dimensions of injection-moulded elbows for socket welding |
| DIN 16831-2-2003 | 聚(異)丁烯壓力管道用管道配件和連接組件.PB 125型.第2部分:承插焊接用注模三通管尺寸 | Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 2: Dimensios of injection-moulded tees for socket welding |
| DIN 16831-3-2003 | 聚(異)丁烯壓力管道用管道配件和連接組件.PB 125型.第3部分:承插焊接用注模套管和帽.尺寸 | Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 3: Dimensions of injection-moulded sockets and caps for socket welding |
| DIN 16831-4-2003 | 聚(異)丁烯壓力管道用管道配件和連接組件.PB 125型.第4部分:承插焊接用注模異徑管尺寸 | Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 4: Dimensions of injection-moulded reducers for socket welding |
| DIN 16831-5-1999 | 聚丁烯(PB)制壓力管道用管連接件和零件.PB125.第5部分:一般質量要求、試驗 | Pipe joints and components of polybutene (PB) for pipes under pressure; PB 125 - Part 5: General quality requirements, testing |
| DIN 16831-6-2003 | 聚(異)丁烯壓力管道用管道配件和連接組件.PB 125型.第6部分:耐焊接配件尺寸 | Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 6: Dimensions of fittings for resistance welding |
| DIN 16831-7-2004 | 聚(異)丁烯壓力管道用管道配件和連接組件.PB 125型.第7部分:承插焊接用套管、法蘭和密封環組件的尺寸 | Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 7: Dimensions of bushings, flanges and selaing elements for socket welding |
| DIN 1687-4-1986 | 重型金屬合金粗鑄件.壓力模鑄件.第4部分:一般公差、加工余量 | Heavy metal alloy raw castings; pressure die castings; general tolerances, machining allowances |
| DIN 1688-4-1986 | 輕型金屬合金粗鑄件.壓力模鑄件.第4部分:一般公差、加工余量 | Light metal alloy raw castings; pressure die castings; general tolerances, machining allowances |
| DIN 16962-1-1980 | 1型和2型聚丙烯壓力管道用管接頭和零組件.對焊用弓形結構彎頭.尺寸 | Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends of Segmental Construction for Butt-welding, Dimensions |
| DIN 16962-10-1989 | 1型、2型和3型的聚丙烯壓力管道用管道連接組件和管道配件.第10部分:對焊用噴射模塑配件尺寸 | Pipe joint assemblies and fittings for types 1 to 3 polypropylene (PP) pressure pipes; injection-moulded fittings for butt welding; dimensions |
| DIN 16962-11-1980 | 1型和2型聚丙烯壓力管道用管接頭和零組件.用于對焊的車削和壓制減徑管套.尺寸 | Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Turned and Pressed Reducing Sockets for Butt-welding, Dimensions |
| DIN 16962-12-1999 | 聚丙烯(PP)制壓力管道用管連接件和零件.PP-H 100,PP-B 80和PP-R 80.第12部分:承口焊接用凸緣接頭、法蘭、密 | Pipe joints and components of polypropylene (PP) for pipes under pressure, PP-H 100, PP-B 80 and PP-R 80 - Part 12: Flange adapters, flanges, sealing rings for socket welding; dimensions |
| DIN 16962-13-1987 | 1型和2型聚丙烯壓力管道用管連接件和接頭.管接頭.尺寸 | Pipe joint assemblies and fittings for type 1 and type 2 polypropylene (PP) pressure pipes; pipe couplings; dimensions |
| DIN 16962-2-1983 | 1型和2型聚丙烯壓力管道用管接頭組件和接頭.用對焊的分段嵌入和減頸方法制造的T型管及支管.尺寸 | Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; tees and branches produced by segment inserts and necking for butt welding; dimensions |
| DIN 16962-3-1980 | 1型和2型聚丙烯壓力管道用管接頭和零組件.對焊用管成形彎頭.尺寸 | Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends Formed from Pipe for Butt-welding, Dimensions |
| DIN 16962-4-1988 | 1型和2型聚丙烯壓力管道用管道連接組件和管道配件.第4部分:熔焊、法蘭和密封元件管接頭尺寸 | Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions |
| DIN 16962-5-2000 | 聚丙烯壓力管道用管連接件和零件.PP-H100,PP-B80,PP-R80.第5部分:一般質量要求.試驗 | Pipe joints and components of polypropylene (PP) for pipes under pressure, PP-H 100, PP-B 80 and PP-R 80 - Part 5: General quality requirements, testing |
| DIN 16962-6-1980 | 1型和2型聚丙烯壓力管道用管接頭和零組件.承插焊接用注塑彎頭.尺寸 | Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions |
| DIN 16962-7-1980 | 1型和2型聚丙烯壓力管道用管接頭和零組件.承插焊接用注塑三通.尺寸 | Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions |
| DIN 16962-8-1980 | 1型和2型聚丙烯壓力管道用管接頭和零組件.承插焊接用注塑管套和管帽.尺寸 | Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Sockets and Caps for Socket-welding, Dimensions |
| DIN 16962-9-1983 | 1型和2型聚丙烯壓力管道用管連接組件和接頭.承插焊接用注塑減徑管件與套管.尺寸 | Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions |
| DIN 16963-1-1980 | .1型和2型高密度聚乙烯壓力管道用管連接件.對焊用弓形結構的管子彎頭.尺寸 | Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends of Segmental Construction for Butt-welding, Dimensions |
| DIN 16963-10-1980 | 1型和2型高密度聚乙烯壓力管道用管子接頭與零件.承插焊接用注塑套筒與帽蓋.尺寸 | Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Sockets and Caps for Socket-welding, Dimensions |
| DIN 16963-11-1999 | 聚乙烯(PE)制壓力管道用管連接件和零件.PE 80和PE 100.第11部分:承口焊接用凸緣接頭、法蘭、密封圈.尺寸 | Pipe joints and components of polyethylene (PE) for pipes under pressure, PE 80 and PE 100 - Part 11: Flange adapters, flanges, sealing rings for socket welding; dimensions |
| DIN 16963-13-1980 | 1型和2型高密度聚乙烯壓力管道用管子接頭與零件.對焊用車削的和壓制的縮徑承接件.尺寸 | Pipe Joints and Elements for High Pressure Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Turned and Pressed Reducing Sockets for Butt-welding, Dimensions |
| DIN 16963-14-1983 | 1型和2型高密度聚乙烯壓力管道用管連接組件和接頭.承插焊接用注塑減徑管件與套管.尺寸 | Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions |
| DIN 16963-15-1987 | 高密度聚乙烯壓力管道用管連接件和接頭.管接頭.尺寸 | Pipe joint assemblies and fittings for high-density polyethylene (HDPE) pressure pipes; pipe couplings; dimensions |
| DIN 16963-2-1983 | 1型和2型高密度聚乙烯壓力管道用管接頭組件和配件.用對焊的分段嵌入和縮頸方法制造的T型管及支管.尺寸 | Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; tees and branches produced by segment inserts and necking for butt welding; dimensions |
| DIN 16963-3-1980 | 1型和2型高密度聚乙烯壓力管道用管子接頭與零件.對焊用彎管.尺寸 | Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends for Butt-welding, Dimensions |
| DIN 16963-4-1988 | 高密度聚乙烯壓力管道用管道連接組件和管道配件.第4部分:熔焊、法蘭和密封元件管接頭尺寸 | Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions |
| DIN 16963-6-1989 | 高密度聚乙烯壓力管用管道連接組件和管道配件.第6部分:對焊用噴射模塑配件尺寸 | Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; injection-moulded fittings for butt welding; dimensions |
| DIN 16963-7-1989 | 高密度聚乙烯壓力管道用管道連接組件和管道配件.第7部分:電阻焊接配件尺寸 | Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; fittings for resistance welding; dimensions |
| DIN 16963-8-1980 | 1型和2型高密度聚乙烯壓力管道用管子接頭與零件.承插焊接用注塑彎管.尺寸 | Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions |
| DIN 16963-9-1980 | 1型和2型高密度聚乙烯壓力管道用管子接頭與零件.承插焊接用注塑三通管件.尺寸 | Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions |
| DIN 18195-5-2000 | 建筑物的防水.第5部分:對地板和潮濕區域非壓力水的防水層.設計與施工 | Water-proofing of buildings - Part 5: Water-proofing against non-pressing water on floors and in wet areas; design and execution |
| DIN 18218-1980 | 新澆混凝土對垂直模板的壓力 | Pressure of fresh concrete on vertical formwork |
| DIN 18307-2006 | 建筑合同程序(VOB).第C部分:建筑合同通用技術規范(ATV).建筑物外壓力管道工程管敷設 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Laying of pressure pipework outside buildings |
| DIN 18555-9-1999 | 含礦物粘合劑灰漿的試驗.第9部分:凝固灰漿.層間接縫灰漿壓力強度的測定 | Testing of mortars containing mineral binders - Part 9: Hardened mortars; determination of the mortar compressive strength in the bed joint |
| DIN 18855-2-2007 | 商用炊具設備.第2部分:壓力燒水鍋爐.要求和試驗 | Equipment for commercial kitchens - Part 2: Pressure water boilers, requirements and testing |
| DIN 18857-3-2007 | 商用廚房設備.第3部分:可傾壓力燉鍋.要求和試驗 | Equipment for commercial kitchens - Part 3: Tilting pressure braising pans, requirements and testing |
| DIN 18857-4-2007 | 大型廚房設備.第4部分:固定式壓力燉鍋.要求和試驗 | Equipment for commercial kitchens - Part 4: Stationary pressure braising pans, requirements and testing |
| DIN 18863-2003 | 大型廚房設備.壓力蒸氣炊具.要求和試驗 | Equipment for commercial kitchens - Pressure steam cookers - Requirements and testing |
| DIN 18889-1956 | 1個大氣試驗壓力的裝有無壓力貯水鍋爐的燒煤的水加熱器.使用的條件、構造、質量、能力和試驗 | Coal-fired Water-heater with Storage Boiler, without Pressure for Test Pressure of 1 Atmosphere; Terms employed, Construction, Quality, Capacity and Testing |
| DIN 19534-3-2000 | 非壓力地下排水和污水排放用帶環形密封承口的硬聚氯乙烯(PVC-U)管和管件.第3部分:質量控制和安裝 | Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) with ring seal socket for non pressure underground drainage and sewerage - Part 3: Quality control and installation |
| DIN 19802-1977 | 石棉水泥壓力管道用鑄鐵專用鑄件.套管頭 | Cast iron special castings for asbestos cement pressure pipelines; spigot ends |
| DIN 19803-1977 | 石棉水泥壓力管道的鑄鐵專用鑄件.帶法蘭套管 | Cast iron special castings for asbestos cement pressure pipelines; flanged spigots |
| DIN 19804-1977 | 石棉水泥壓力管道用鑄鐵專用鑄件.錐形件 | Cast iron special castings for asbestos cement pressure pipelines; tapers |
| DIN 19805-1977 | 石棉水泥壓力管道用鑄鐵的專用鑄件.彎管頭 | Cast iron special castings for asbestos cement pressure pipe lines; bends |
| DIN 19806-1977 | 石棉水泥壓力管道專用鑄鐵鑄件.支管 | Cast iron special castings for asbestos cement pressure pipelines; branches |
| DIN 19807-1977 | 石棉水泥壓力管道的專用鐵鑄件.鑄鐵管的連接件 | Cast iron special castings for asbestos cement pressure pipelines; joining pieces at cast iron pipes |
| DIN 19808-1977 | 石棉水泥壓力管道用鑄鐵專用鑄件.管堵 | Cast iron special castings for asbestos cement pressure pipelines; plugs |
| DIN 20002-1-1989 | 礦山管道.帶活動法蘭和平凸緣的鋼管.標稱壓力10 | Pipelines for mining; steel tubes with loose flanges and plain collars; nominal pressure 10 |
| DIN 20002-2-1989 | 礦山管道.帶活動法蘭和凸緣的鋼管.標稱壓力6 | Pipelines for mining; steel tubes with loose flanges and collars; projection and recess; nominal pressure 6 |
| DIN 20002-3-1989 | 礦山用管道.帶活動法蘭和平凸緣的鋼管.標稱壓力40 | Pipelines for mining; steel tubes with loose flanges and plain collars; nominal pressure 40 |
| DIN 20003-1-1987 | 礦山用鋼管.帶活套法蘭和普通套環的配件.第1部分:公稱壓力 10 | Steel tubes for mining; fittings with loose flanges and plain collars; nominal pressure 10 |
| DIN 20003-2-1987 | 礦山用鋼管.帶活套法蘭和普通套環的配件.第2部分:公稱壓力 6 | Steel tubes for mining; fittings with loose flanges and plain collars, projection and recess; nominal pressure 6 |
| DIN 20003-3-1987 | 礦山用鋼管.帶活套法蘭和普通套環的配件.第3部分:公稱壓力 40 | Steel tubes for mining; fittings with loose flanges and plain collars; nominal pressure 40 |
| DIN 20004-1-2000 | 礦山用鋼管.第1部分:額定壓力PN10和PN40的插接環 | Steel tubes for mining - Part 1: Interpose rings rated for PN 10 and PN 40 |
| DIN 20004-2-2000 | 礦山用鋼管.第2部分:額定壓力PN10和PN40的楔形環 | Steel tubes for mining - Part 2: Wedge rings rated for PN 10 and PN 40 |
| DIN 20018-1-2003 | 織物增強軟管.第1部分:最大工作壓力PN 10/16 | Textile-reinforced hoses - Part 1: Maximal working pressure PN 10/16 |
| DIN 20018-2-2003 | 織物增強軟管.第2部分:最大工作壓力PN 40 | Textile-reinforced hoses - Part 2: Maximal working pressure PN 40 |
| DIN 20018-3-2003 | 織物增強軟管.第3部分:最大工作壓力PN 100 | Textile-reinforced hoses - Part 3: Maximal working pressure PN 100 |
| DIN 20035-1990 | 軟管管接頭.法蘭管嘴.公稱壓力16 | Hose fittings; flange nozzle; nominal pressure 16 |
| DIN 20040-1990 | 軟管管接頭.連接套管閥.公稱壓力16 | Hose fittings; nipple valves; nominal pressure 16 |
| DIN 20042-2001 | 標稱壓力40的水閥.尺寸和要求 | Watervalve, nominal pressure 40 - Dimensions and requirements |
| DIN 2098-1-1968 | 圓線材制螺旋彈簧.線材直徑0.5MM以上的冷卷壓力彈簧的尺寸 | Helical springs Made of Round Wire; Dimensions for Cold Coiled Compression Springs with Wire Diameter from 0.5 mm upwards |
| DIN 2098-2-1970 | 圓線材制螺旋彈簧.線材直徑0.5MM以下的冷卷壓力彈簧的尺寸 | Helical Springs Made of Round Wire; Dimensions for Cold-coiled compression springs of less than 0.5 mm Wire Diameter |
| DIN 21557-1987 | 礦井支承.動力支承的壓力極限閥.標識代碼 | Mine support; yield valves for powered support; identification code |
| DIN 21639-1999 | 動力輔助作動的空氣門.行車道空氣鎖.壓力門 | Power assisted air gates - Travel-way air locks - Type doors with pressure |
| DIN 2271-2-1976 | 氣動長度測量（氣動量?jī)x）.高壓力范圍用儀器的結構特點 | Pneumatic Length Measurement (Air Gauging); Design Features of Instruments Working in the High Pressure Range |
| DIN 2353-1998 | 帶環套的非焊接壓力連接接頭.完全壓連接和概述 | Non-soldering compression fittings with cutting ring - Complete fittings and survey |
| DIN 24312-1985 | 液壓系統和元件.壓力、量值、術語 | Fluid power systems and components; pressure; quantities, terms |
| DIN 2442-1963 | 規定質量標稱壓力1至100的適合螺紋連接的鋼管 | Steel Tubes of Specified Quality Suitable for Screwing; Nominal Pressure 1 to 100 |
| DIN 2445-1-2000 | 承受動態載荷的無縫鋼管.第1部分:流體系統用壓力為100至500巴的熱軋管 | Seamless steel tubes for dynamic loads - Part 1: Hot finished tubes in fluid systems, 100 to 500 bar |
| DIN 2445-2-2000 | 承受動態載荷的無縫鋼管.第2部分:流體系統用壓力為100至500巴的精密鋼管 | Seamless steel tubes for dynamic loads - Part 2: Steel tubes for precision application in fluid systems, 100 bar to 500 bar |
| DIN 24540-1-1986 | 有色金屬及其工具用棒材和管材壓力機.第1部分:總則 | Rod and tube-presses for non-ferrous metals and their tools; generalities |
| DIN 24550-1-2006 | 液壓技術.液壓過濾器.第1部分:定義、額定壓力、額定尺寸、連接尺寸 | Fluid power - Hydraulic filters - Part 1: Definitions, nominal pressures, nominal sizes, fitting dimensions |
| DIN 2470-1-1987 | 允許工作壓力16巴以下的氣體輸送用鋼管道.管道和配件 | Steel gas pipelines for permissible working pressures up to 16 bar; pipes and fittings |
| DIN 25436-1980 | 用絕對壓力法檢驗安全殼累積泄漏率 | Integral leakage rate test of containment with the absolute pressure method |
| DIN 2605-1-1991 | 對焊鋼管配件.第1部分:壓力減縮系數彎頭和彎管 | Steel butt-welding pipe fittings; elbows and bends with reduced pressure factor |
| DIN 2615-1-1992 | 對焊鋼制管件.帶有換算壓力系數的丁字管接 | Steel butt-welding pipes fittings; tees with reduced pressure factor |
| DIN 2615-2-1992 | 對焊鋼制管件.在全工作壓力下使用的丁字管接 | Steel butt-welding pipe fittings; tees for use at full service pressure |
| DIN 2616-1-1991 | 對焊鋼管配件.第1部分:壓力減縮系數的偏心減壓器 | Steel butt-welding pipe fittings; eccentric reducers with reduced pressure factor |
| DIN 2616-2-1991 | 對焊鋼管配件.第2部分:滿工作壓力條件下使用的減壓器 | Steel butt-welding pipe fittings; reducers for use at full service pressure |
| DIN 27201-5-2006 | 鐵路車輛的狀況.基本原理和產品技術.第5部分:鐵路車輛的車輪壓力和垂直車輪副壓力的檢查 | State of railway vehicles - Basic principles and production technology - Part 5: Checking of wheel forces and vertical wheelset forces of railway vehicles |
| DIN 28018-2006 | 玻璃纖維襯鋼的壓力容器.設備用0.063-10立方米的生產設備用容器 | Pressure vessels, glass lined steel - Vessels for production plants 0,063 m<(hoch)3> up to 10 m<(hoch)3> |
| DIN 28019-2006 | 玻璃纖維襯鋼的壓力容器.12.5-125立方米的儲存用容器 | Pressure vessels, glass lined steel - Vessels for storage 12,5 m<(hoch)3> up to 125 m<(hoch)3> |
| DIN 28020-2007 | 0.63立方米至25立方米臥式壓力容器.尺寸 | Horizontal pressure vessels 0,63 m<(hoch)3> up to 25 m<(hoch)3> - Dimensions |
| DIN 28021-2006 | 立式壓力容器.6.3-100立方米貯存用容器.尺寸 | Vertical pressure vessels - Vessels for storage, 6,3 m<(hoch)3> up to 100 m<(hoch)3> - Dimensions |
| DIN 28022-2006 | 立式壓力容器.0.063-25立方米的加工設備用容器.尺寸 | Vertical pressure vessels - Vesels for process plants 0,063 m<(hoch)3> up to 25 m<(hoch)3> - Dimensions |
| DIN 28032-2005 | 非合金鋼制壓力容器和加工裝置用焊接法蘭 | Non-alloy steel weld flanges for pressure vessels and process apparatus |
| DIN 28034-2005 | 非合金鋼制壓力容器和加工裝置用焊頸法蘭 | Non-alloy steel weld-neck flanges for pressure vessels and process apparatus |
| DIN 28036-2005 | 不銹鋼制壓力容器和加工裝置用焊接法蘭 | Weld flanges for pressure vessels and process apparatus of stainless steel |
| DIN 28038-2003 | 不銹鋼制壓力容器和加工裝置用帶圓柱形轂焊接法蘭 | Weld flanges with cylindrical hub for pressure vessels and process apparatus of stainless steel |
| DIN 28050-1986 | 設備和容器.容許工作壓力-0.2巴至0.1巴.交貨技術條件 | Equipment and vessels; allowable working pressure -0,2 bar to 0,1 bar; technical delivery conditions |
| DIN 28124-1-1992 | 非合金鋼和不銹鋼制非壓力容器和工藝裝置用人孔蓋 | Manhole closures for unpressurized vessels and process apparatus of nonalloy and stainless steel |
| DIN 28124-2-1992 | 非合金鋼制壓力容器用人孔蓋 | Manhole closures for pressure vessels of non-alloy steel |
| DIN 28124-3-1992 | 不銹鋼制壓力容器用人孔蓋 | Manhole closures for pressure vessels of stainless steel |
| DIN 28150-1992 | 搪瓷的對焊法蘭的組合搭接法蘭.公稱壓力（PN）10 | Divided lapped flange for glass lined welding necks; PN 10 |
| DIN 28416-1976 | 真空技術.10(-3)至10(-7)mbar范圍內真空計的校準.一般方法:通過連續不斷的流動降低壓力 | Vaccum technology; calibration of vacuum gauges within the range of 10<(hoch)-3> to 10<(hoch)-7> mbar, general method: pressure reduction by continuous flow |
| DIN 28417-1976 | 真空技術.在恒定壓力下用容積法測量抽氣量 | Vacuum technology; measurement of throughput by the volumetric method at constant pressure |
| DIN 3159-1965 | 標稱壓力25以下的制冷設備接頭法蘭的安裝尺寸 | Assembling dimensions of flanges for fittings for refrigerating installations up to nominal pressure 25 |
| DIN 3160-1974 | 公稱壓力25巴的冷凍電路的直通截止閥 | Through-valves for refrigerant circuits, nominal pressure 25 bar |
| DIN 3161-1974 | 公稱壓力25巴的冷凍電路的彎管閥 | Elbow valves for refrigerant circuits; nominal pressure 25 bar |
| DIN 3162-1974 | 公稱壓力25巴的冷凍電路的閥門的螺紋蓋板 | Screwed caps for valves for refrigerant circuits, nominal pressure 25 bar |
| DIN 3163-1974 | 公稱壓力25巴的冷凍電路的控制直通閥 | Control through valves for refrigerant circuits, nominal pressure 25 bar |
| DIN 3171-1-2000 | 呼吸裝置.壓縮空氣和壓縮氧氣用壓縮氣瓶.第1部分:試驗壓力為300巴和450巴的無縫鋼瓶. | Breathing apparatus - Compressed gas cylinders for compressed air and compressed oxygen - Part 1: Seamless steel cylinders, for 300 bar and 450 bar test pressure |
| DIN 3171-2-2000 | 呼吸裝置.壓縮空氣和壓縮氧氣用壓縮氣瓶.第2部分:試驗壓力為300巴和450巴的復合結構瓶. | Breathing apparatus - Compressed gas cylinders for compressed air and compressed oxygen - Part 2: Composite cylinders for 300 bar and 450 bar test pressure |
| DIN 32503-1979 | 用于焊接、切割和相關工藝的外殼直徑為63mm的壓力測量?jī)x( 壓力表)的保護罩. | Protective caps for pressure gauges with case diameter 63 mm used in welding, cutting and allied processes |
| DIN 3280-1988 | 家用供水管道的閥門.公稱壓力 PN 10 以下的錐形連接管.概述 | Valves for domestic water supply; tapered unions up to PN 10; survey |
| DIN 3281-1988 | 家用供水管道的閥門.公稱壓力10的錐形管子接頭.概述 | Valves for domestic water supply; tapered union nipples nominal pressure 10; survey |
| DIN 3283-1988 | 家用供水管道的閥門.公稱壓力為10的螺紋連接管和聯管節.帶內螺紋的廢水排放連接管 | Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with internal threads |
| DIN 3284-1988 | 家用供水管道的閥門.公稱壓力為10的螺紋連接管和聯管節.帶外螺紋的連接管 | Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with external threads |
| DIN 3285-1988 | 家用供水管道的閥門.公稱壓力為10的螺紋連接管和聯管節.軟管連接管 | Valves for domestic water supply; nipples and unions nominal pressure 10; hose nipples |
| DIN 3287-1988 | 家用供水管道的閥門.公稱壓力為10的螺紋連接管和聯管節.管路用帶螺紋的連接管 | Valves for domestic water supply; nipples and unions nominal pressure 10; threaded nipples for tubes |
| DIN 3289-1988 | 家用供水管道的閥門.公稱壓力為10的螺紋連接管和聯管節.帶螺紋的錐形管子接頭 | Valves for domestic water supply; nipples and unions nominal pressure 10; threaded tapered union nipples |
| DIN 3291-1988 | 家用供水管道的閥門.公稱壓力為10的螺紋連接管和聯管節.帶螺紋的軟管連接管 | Valves for domestic water supply; nipples and unions nominal pressure 10; threaded hose nipples |
| DIN 32935-1987 | 家庭運動器械.可移動的進行拉伸和壓力訓練的器械.安全性要求和試驗 | Home sports equipment; mobile tension and pression training equipment, safety requirements, testing |
| DIN 3334-1968 | 帶法蘭接頭的加熱裝置用混合閥.標稱壓力為6、最高溫度110 ℃的三通混合閥、四通混合閥.安裝尺寸 | Mixing valves for heating installations with flanges, three way mixing valves, four way mixing valves, ND 6 max. 110 °C; installation dimensions |
| DIN 3335-1968 | 加熱裝置的帶螺絲端部的混合閥.三通混合閥.四通混合閥.公稱壓力6.使用溫度110 ℃.安裝尺寸 | Mixing valves for heating installations with screwed ends; three way mixing valves, four way mixing valves, ND 6 max. 110 °C, installation dimensions |
| DIN 3336-1968 | 帶焊接彎管端的加熱裝置的混合閥.公稱壓力6、最大使用溫度110 ℃的三通混合閥、四通混合閥.安裝尺寸 | Mixing valves for heating installations with welding neck ends; three way mixing valves, four way mixing valves, ND 6 max. 110 °C, installation dimensions |
| DIN 3394-1-2004 | 自動控制閥.第1部分:壓力為4巴到16巴的減壓安全和調節閥 | Automatic control valves - Part 1: Pressure relief, safety and regulating valves for pressure above 4 bar up to 16 bar |
| DIN 3394-3-2004 | 自動控制閥.第3部分:壓力為4巴及以下的0級減壓安全閥 | Automatic control valves - Part 3: Class 0 pressure relief, valves for pressure up to 4 bar |
| DIN 3398-3-1982 | 氣態物質的壓力斷路開關.要求和檢驗 | Pressure cut-off switches for gaseous substances; requirements and testing |
| DIN 3398-4-1986 | 第4部分:液態燃料和熱載體油的壓力切斷開關 | Pressure cut-off switches for liquid fuels and heat transfer oils |
| DIN 3431-1986 | 燃?xì)忾y門.壓力連接的角型球截止閥 | Gas valves; angle pattern ball shut-off valves with compression coupling |
| DIN 3432-1986 | 燃?xì)忾y門..壓力連接的直型球截止閥 | Gas valves; straight pattern ball shut-off valves with compression coupling |
| DIN 3533-1981 | 煤氣裝置用閥門.帶壓力接頭的角度型旋閥 | Valves for gas installations; angle pattern stop cocks with compression fitting |
| DIN 37082-1975 | 制動踢片的調節裝置.彈簧螺栓的壓力彈簧. | Adjusting Equipment for Brake Blocks; Compression Springs, Spring Bolt |
| DIN 38030-2001 | 有軌車輛壓縮空氣裝置.壓力量規 | Compressed air equipment for rail vehicles - Pressure gauges |
| DIN 3850-1998 | 壓力連接管接頭.概述 | Compression fittings - Summary |
| DIN 3859-2-1999 | 壓力連接管聯結器.第2部分:帶符合DIN 2353DIN 和 EN ISO 8434-1 的帶切斷環的非焊接壓力連接管聯結器的組裝 | Compression couplings - Part 2: Assembly instruction for non-soldering compression couplings with cutting rings according DIN 2353 and DIN EN ISO 8434-1 |
| DIN 3866-1990 | 制冷.螺紋堵塞.額定用于40公稱壓力的非釬焊壓緊管接頭的90°擴口法蘭 | Refrigeration; threaded stem; 90° flared flanges for solderless compression couplings rated for PN 40 |
| DIN 4000-61-1992 | 壓力測量?jī)x和測量?jī)x配件的產品特性圖表 | Tabular layouts of article characteristics for pressure gauges and their fittings |
| DIN 4018 Bb.1-1981 | 地基.在筏基下接觸壓力分配的分析.說明和分析示例 | Subsoil; analysis of contact pressure distribution under raft foundations; explanations and examples of analysis |
| DIN 4018-1974 | 地基.擴展基礎下承壓力分布的計算 | Subsoil; Calculation of the Bearing Pressure Distribution under Spread Foundations |
| DIN 4085 Bb.2-1989 | 土壤.土地壓力的計算.計算示例 | Soil; analysis of earth-pressure; calculation examples |
| DIN 41640-80-1988 | 機電元件的測量和試驗方法.試驗A.第80部分:觸點壓力、彈性內觸點 | Measuring methods and testing procedures for electromechanical components; test A: contact force, resilient female contacts |
| DIN 42112-1-1986 | 印制電路板用帶壓力點的按鈕開關.A型(12.5×12.5)mm.B型(10×10)mm.尺寸、額定值、要求、檢驗 | Push-button switches with pressure point for printed boards; type A (12,5 12,5) mm; type B (10 10) mm; dimensions, ratings, requirements, tests |
| DIN 43614-1-1979 | 壓力氣體管道的轉換開關裝置和控制裝置..銅導管 | Switchgear and controlgear conduits for pressure-gas pipelines; copper conduits |
| DIN 43615-1976 | 開關設備.高壓氣體設備的額定壓力和壓力范圍 | Switchgear-plants; nominal pressure and pressure ranges for pressure-gas plants |
| DIN 43686-1977 | 電氣轉換裝置中壓縮空氣發生裝置用壓力容器 | Pressure vessels for air generating stations in electrical switching plants |
| DIN 43687-1976 | 電氣開關廠的空氣壓力發生站用的立式壓力容器 | Vertical pressure tanks for air pressure generating stations in electrical switching plants |
| DIN 43688-1976 | 電氣開關設備中氣壓發生裝置用臥式壓力容器. | Horizontal pressure tanks for air pressure generating stations in electrical switching plants |
| DIN 43691-1982 | 電氣開關設備.壓力.公式 | Electrical switchgear; pressure; expressions |
| DIN 44897-1-1977 | 固定式電熱水器.第1部分:臺置式敝口熱水器用混合蓄電池的尺寸和允許的壓力損耗 | Stationary electric water heaters; dimensions and permissible pressure losses for mixing batteries for open-outlet water heaters above table |
| DIN 45635-1603-1978 | 機器排放的空氣傳播噪聲的測量.第1603部分:包洛面法.金屬加工機床.通用壓力機的特殊規定 | Measurements of Airborne Noise Emitted by Machines; Enveloping Surface Method; Metal Processing Machine Tools; Special Stipulations for Universal Presses |
| DIN 46199-6-1974 | 電器開關設備.第6部分:壓力和溫度開關設備的接頭標記 | Electrical switchgear; terminal markings for pressure and temperature, sensitive devices |
| DIN 4661-1-1968 | 氣瓶.試驗壓力為30atu的焊接鋼氣瓶 | Gas cylinders, welded steel gas cylinders, test pressure 30 atü |
| DIN 4680-1-1992 | 地上液化氣存儲用固定式鋼制壓力容器.尺寸和托架 | Stationary, above ground, steel pressure vessels for the storage of liquefied petroleum gas; dimensions and mountings |
| DIN 4680-2-1992 | 半地上液化氣存儲用固定式鋼制壓力容器.尺寸和托架 | Stationary, partially sunk, steel pressure vessels for the storage of liquefied petroleum gas; dimensions and mountings |
| DIN 4681-2-1984 | 地下設備用帶護套的鋼制固定位置液化石油氣壓力容器.尺寸、設備 | Steel fixed site pressurized LPG tanks with jacket for underground installation; dimensions, equipment |
| DIN 4750-1993 | 保持蒸汽壓力在0.5巴以下的蒸汽鍋爐和加熱設備中蒸汽室內豎管的要求 | Requirements for vertical pipes for steam rooms in steamboilers and heating plants guarding against steampressure of 0,5 bar |
| DIN 47617-1975 | 帶金屬護套的壓力氣體監控的通信電纜的電纜交接箱.內電纜交接箱 | Joint boxes for pressure gas supervised telecommunication cables, metal sheathed; internal joint boxes |
| DIN 47629-1986 | 通訊電纜用的壓力密封堵塞塊.要求和試驗 | Pressure-tight blockstops for telecommunication cables; requirements, tests |
| DIN 477-4-1982 | 壓力氣瓶閥.野營用儲氣瓶的旋轉止回閥 | Compressed gas cylinder valves; swing check valves for camping-cylinders |
| DIN 477-5-2002 | 氣瓶閥.第5部分:最大試驗壓力為450巴.出口接頭 | Gas cylinder valves - Part 5: For test pressure up to 450 bar max.; Outlet connections |
| DIN 48083-1-1985 | 壓力連接件用壓力機模具.標稱壓力15KN和60KN以下的機械壓力機.尺寸 | Dies for presses for pressure connections; mechanical presses with a nominal compressive force up to 15 and up to 60 kN connecting; dimensions |
| DIN 48083-3-1985 | 壓力連接件用壓力機模具.標稱壓力為300、450 和1000KN以下的液壓機.尺寸 | Dies for presses for pressure connections; hydraulical presses with a nominal compressive force up to 300, up to 450 and up to 1000 kN connecting; dimensions |
| DIN 48083-4-1985 | 壓力連接件用壓力機模具.六角形壓縮類型尺寸 | Dies for presses for pressure connections; dimensions of the hexagon compression type |
| DIN 4809-1-1986 | 熱水加熱裝置用彈性化合物材料制膨脹件(橡膠膨脹件).最高工作溫度為100℃和最大壓力為10巴 | Compensators made of elstomeric compound materials (rubber-compensators) for warm water heating-plants; up to a maximum operating-temperature of 100 C and a maximum pressure of 10 bar |
| DIN 4810-1991 | 供水系統用鋼制壓力容器 | Steel pressure vessels for water supply systems |
| DIN 49016-1-1979 | 電氣設備用導管和配件.第1部分:剛性耐火傳導式絕緣導管和配件、中型和重型壓力用普通耦合器和彎頭 | Conduits and fittings for electrical installation; rigid non-flame propagating insulating conduits and fittings, plain conduits couplers and bends for medium and heavy pressure strength |
| DIN 49016-2-1981 | 電氣裝置用導管和附件.剛性無焰?zhèn)鞑サ慕^緣材料管和附件.中型和重型壓力負荷用帶耦合器的普通管和帶耦合器彎 | Conduits and fittings for electrical installation; rigid non-flame propagating insulating conduits and fittings; plain conduits with coupler and bends with coupler for medium and heavy pressure strength |
| DIN 49017-1-1979 | 電氣設備用導管和配件.第1部分:剛性耐火傳導式絕緣導管和配件、輕型壓力用普通耦合器和彎頭 | Conduits and fittings for electrical installation; rigid non-flame propagating insulating conduits and fittings, plain couplers and bends for light pressure strength |
| DIN 49017-2-1981 | 電氣設備用導管和管接頭.剛性非火焰擴散絕緣導管和管接頭.輕壓力強度用帶接頭的光滑導管和帶接頭的彎頭 | Conduits and fittings for electrical installation; rigid nonflame propagating insulating conduits and fittings; plain conduits with coupler and bends with coupler for light pressure strength |
| DIN 49018-1-1972 | 電氣設備用導管和配件.第1部分:中型和輕型壓力負荷用絕緣材料和耦合器的柔性波紋導管與易燃導管 | Conduits and fittings for electrical installation; flexible corrugated and inflammable conduits of insulating material and couplers for middle and light pressure load |
| DIN 49018-2-1972 | 電氣設備用導管和配件.第2部分:帶普通機套絕緣材料和重型壓力負荷用柔性波紋套管和易燃導管 | Conduits and fittings for electrical installation; flexible corrugated and inflammable conduits of insulating material with plain mantle and for heavy pressure load |
| DIN 49019-1-1972 | 電氣設備用導管.第1部分:中型和輕型壓力負荷用絕緣材料的柔性普通導管與非易燃導管 | Conduits for electrical installation; flexible plain and non inflammable conduits of insulating material for middle and light pressure load |
| DIN 49019-2-1978 | 電氣設備用導管.中等壓力負荷用絕緣材料制柔性難燃普通導管 | Conduits for electrical installation; flexible plain and non inflammable conduits of insulating material for medium pressure load |
| DIN 49019-3-1975 | 電氣設備用導管和配件.第3部分:輕型壓力負荷和耐熱溫度可達 105℃ 的絕緣材料的柔性波紋導管與非易燃導管 | Conduits and fittings for electrical installation; flexible corrugated and non inflammable conduits of insulating material for light pressure load and a heat resistance up to 105 C |
| DIN 50104-1983 | 空心體的內壓力試驗.達到一定內壓力值的滲漏檢測.一般規范 | Testing of hollow bodies by internal pressure; leak detection up to a certain pressure value; general specifications |
| DIN 50106-1978 | 金屬材料的檢驗；壓力試驗 | Testing of Metallic Materials; Compression Test |
| DIN 50312-1977 | 磨料檢驗.壓力噴射用試驗箱 | Testing of abrasives; test cabin for pressure-type blasting |
| DIN 51079-2-2004 | 陶瓷材料的檢驗.作為原材料和材料成分的碳化硅的化學分析.第2部分:用酸進行的壓力分解 | Testing of ceramic materials - Chemical analysis of silicon carbide used as raw material and as constituent in materials - Part 2: Pressure decomposition with acid |
| DIN 51302-2-2000 | 材料試驗機.拉伸.加壓和彎曲試驗機的檢驗.建筑材料壓力試驗機的鉤檢驗 | Materials testing machines - Strain cylinder test method for compression testing machines for concrete |
| DIN 51351-2007 | 潤滑劑測試.壓力管法測定制冷機油絮凝點 | Testing of lubricants - Determination of floc point of refrigerator oils by pressure tube method |
| DIN 51514-1996 | 潤滑劑試驗.壓力管法測定制冷劑中制冷機油的混合空隙 | Testing of lubricants - Determination of the mixture gap of refrigerator oil in refrigerants by pressure tube method |
| DIN 51524-1-2006 | 壓力液體.液壓油.第1部分:HL液壓油.最低要求 | Pressure fluids - Hydraulic oils - Part 1: HL hydraulic oils; Minimum requirements |
| DIN 51524-2-2006 | 壓力液體.液壓油.第2部分:HLP液壓油.最低要求 | Pressure fluids - Hydraulic oils - Part 2: HLP hydraulic oils; Minimum requirements |
| DIN 51524-3-2006 | 壓力液體.液壓油.第3部分:HLP液壓油.最低要求 | Pressure fluids - Hydraulic oils - Part 3: HVLP hydraulic oils; Minimum requirements |
| DIN 51640-1989 | 液化石油氣的試驗.40℃和70℃時蒸氣壓力的計算 | Testing of liquified petroleum gases; calculation of vapour pressure at 40 °C and 70 °C |
| DIN 51805-1974 | 潤滑劑試驗.潤滑脂流動壓力的測定.耐蝕試驗（Ｋesternich ）法 | Testing of lubricants; determination of flow pressure of lubricating greases, Kesternich method |
| DIN 51859-1990 | 氣體燃料和其它氣體的檢驗.受氣體壓力和溫度影響冷凝液含量的重力測定 | Testing of gaseous fuels and other gases; gravimetric determination of the content of condensate as a function of pressure and temperature |
| DIN 52009-2006 | 集料試驗方法.壓力下的吸水性測定 | Test methods for aggregates - Determination of water absorption under pressure |
| DIN 52192-1979 | 木材的檢驗.垂直于木紋方向的壓力試驗 | Testing of wood; compression test perpendicular to grain |
| DIN 53291-1982 | 夾層結構的試驗.垂直于面層的壓力試驗 | Testing of sandwiches; Compression test perpendicular to the faces |
| DIN 53380-2-2006 | 塑料的試驗.測定氣體傳輸率.第2部分:塑料薄膜的壓力計法 | Testing of plastics - Determination of gas transmission rate - Part 2: Manometric method for testing of plastic films |
| DIN 53424-1978 | 硬質泡沫材料的檢驗.在彎曲載荷和壓力載荷的高溫條件下尺寸穩定性的測定 | Testing of Rigid Cellular Materials; Determination of Dimensional Stability at Elevated Temperatures with Flexural Load and with Compressive Load |
| DIN 53758-1975 | 塑料制品的試驗.短時間試驗內部壓力對空心物體作用的測定 | Testing of plastics articles; determination of the effect of internal pressure on hollow objects by short-time test |
| DIN 53759-1975 | 塑料制品的試驗.長時間試驗內部壓力對空心物體作用的測定 | Testing of plastics articles; determination of the effect of internal pressure on hollow objects by long-time test |
| DIN 53769-3-1988 | 玻璃纖維增強塑料管試驗.管子短時間和長時間最大壓力試驗 | Testing of glass fibre reinforced plastics pipes; determination of initial and long-term ring stiffness |
| DIN 5435-1980 | 手動泵.公稱壓力為1至2.5的帶肩的雙孔法蘭 | Hand-pumps; two hole tube flanges with shoulder, for nominal pressure 1 to 2,5 |
| DIN 55170-1961 | 前開臺式曲軸壓力機.規格 | Open-Front Bench Type Eccentric Presses; Sizes |
| DIN 55181-1983 | 機床.額定功率從400kN到4000kN的機械式單動雙柱壓力機:尺寸 | Machine tools; straight sided single acting mechanical presses with nominal forces from 400 kN to 4000 kN; sizes |
| DIN 55184-1985 | 機床.前開式機械能壓力機.工具安裝范圍.結構尺寸、底座、底座環、床身塞子 | Machine tools; open front mechanical power presses; installation zone for tools; constructional sizes, bedplates, bedplate rings, bed plugs |
| DIN 55185-1983 | 機床.額定功率從250kN到4000kN的機械式雙柱高速壓力機.尺寸 | Machine tools; straight sided high speed mechanical presses with nominal forces from 250 kN to 4000 kN; sizes |
| DIN 55457-2 Bb.1-1986 | 包裝試驗.聚烯烴容器.用壓力溫度法檢驗抗應力裂紋性能.第2 Bb 1部分:試驗設備設計示例 | Packaging test; containers made from polyolefins; stress cracking resistance, pressure-temperature method; examples for the design of test equipment |
| DIN 55457-2-2000 | 包裝試驗.聚烯烴容器.抗應力開裂性.第2部分:壓力溫度程序 | Packaging test - Containers made from polyolefines - Part 2: Tension cracking resistance; pressure-temperature procedure |
| DIN 55560-1-1988 | 可再封閉的防兒童打開的包裝.帶壓力/轉動系統(軸向壓力作用)的塑料螺旋罩.特技系統的機械檢驗 | Reclosable child resistant packages; plastic screw closures with press/turn system (axial pressure effect); mechanical testing of trick system |
| DIN 5580-1999 | 有軌車輛的壓縮空氣裝置.鋁合金壓力罐容器.尺寸和標識 | Compressed air equipment for railway vehicles - Pressure vessels made of aluminium alloys - Dimensions, designation |
| DIN 5590-1999 | 有軌車輛用壓縮空氣設備.鋼制壓力容器.尺寸和標識 | Compressed air equipment for rail vehicles - Pressure vessels made of steel - Dimensions, designation |
| DIN 58356-2-2000 | 膜過濾器元件.第2部分:壓力保持器的試驗 | Membrane filter elements - Part 2: Pressure holder tests |
| DIN 6275-1982 | 通用內燃機.容許工作壓力在30巴以下的壓縮空氣罐 | Internal combustion engines for general purposes; Compressed air containers for permissible working overpressures up to 30 bar |
| DIN 65210-1-1987 | 航空航天.額定壓力最高可達 210 巴的軟管組件.第1部分:軟管技術規范 | Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for hoses |
| DIN 65210-2-1987 | 航空航天.額定壓力最高可達 210 巴的軟管組件.第2部分:軟管配件技術規范 | Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for hose fittings |
| DIN 65210-3-1987 | 航空航天.額定壓力最高可達 210 巴的軟管組件.第3部分:成套軟管組件技術規范 | Aerospace; hose assemblies for nominal pressures up to 210 bar; technical specification for complete hose assemblies |
| DIN 65211-1-1987 | 航空航天.額定壓力最高可達 210 巴的軟管組件.第1部分:軟管技術規范 | Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for hoses |
| DIN 65211-2-1987 | 航空航天.額定壓力最高可達 210 巴的軟管組件.第2部分:軟管配件技術規范 | Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for hose fittings |
| DIN 65211-3-1987 | 航空航天.額定壓力最高可達 210 巴的軟管組件.第2部分:成套軟管組件技術規范 | Aerospace; hose assemblies for a nominal pressure of 210 bar; technical specification for complete hose assemblies |
| DIN 65213-1988 | 航空航天.公稱壓力為35巴以下的套管連接用軟管.技術規范 | Aerospace; hoses for sleeve attachment for nominal pressures up to 35 bar; technical specification |
| DIN 65250-1989 | 航空航天.鈦及鈦合金制無縫內壓力管.尺寸和質量 | Aerospace; seamless internal pressure tubes in titanium and titanium alloys; dimensions, masses |
| DIN 65375-1989 | 航空航天.纖維增強的塑料.單向?qū)訅喊宓脑囼?yàn).與纖維方向垂直的壓力試驗 | Aerospace; fiber reinforced plastics; testing of unidirectional laminates; compression test transverse to fiber direction |
| DIN 65486-1993 | 航空航天.結構用緊固件.旋轉緊固件的機械特性.壓力密封型緊固件總成 | Aerospace; fasteners for structural application; rotary fasteners, mechanical properties; rotary fastener, assembly, pressure-tight |
| DIN 65493-1993 | 航空航天.結構緊固件.旋轉緊固件.壓力密封式緊固件插孔 | Aerospace; fasteners for structural application; rotary fasteners; receptacle, pressure-tight |
| DIN 6647-1-2006 | 包裝形式.筒裝飲料容器.第1部分:允許工作壓力小于3巴、標稱容量小于50立升 | Means of packaging - Cylindrical beverage containers - Part 1: Allowable operating pressure up to 3 bar, nominal volume up to 50 litres |
| DIN 6647-2-2006 | 包裝形式.筒裝飲料容器.第2部分:允許工作壓力小于7巴、標稱容量小于50立升 | Means of packaging - Cylindrical beverage containers - Part 2: Allowable operating pressure up to 7 bar, nominal volume up to 50 litres |
| DIN 6647-3-2003 | 包裝材料.圓柱形飲料桶.第3部分:允許工作壓力不超過3巴、標稱容量大于100升 | Means of package - Cylindrical beverage containers - Part 3: Allowable operating pressure up to 3 bar, nominal volume greater 100 litres |
| DIN 6647-4-2004 | 包裝手段.圓柱形飲料包裝盒.第4部分:允許工作壓力3巴及以下、標稱容量60升及以下的不回收包裝 | Means of packaging - Cylindrical beverage containers - Part 4: Non-returnable packaging withallowable operating pressure up to 3 bar, nominal volume up to 60 litres |
| DIN 6694-1981 | 帶壓力卸料裝置的散裝貨車.連接件和設備配件.配置 | Bulk freight wagons with pressure discharge; connections and further fitments; arrangement |
| DIN 6697-1979 | 帶壓力卸料裝置的散裝料運貨車.帶板簧的壓力計.徑向的底部法蘭盤連接 | Bulk freight wagons with pressure discharge; pressure gauge with plate spring, radial bottom flange connection |
| DIN 6698-1979 | 帶壓力卸料裝置的散裝料運貨車.護板和支撐架與測試壓力計的連接 | Bulk freight wagons with pressure discharge; guard and support with test connection of pressure gauge |
| DIN 7079-1-1999 | 抗壓力的圓形玻璃－金屬熔融觀察鏡.第1部分:用于帶槽面夾持裝置 | Pressure resistant circular glass-to-metal fused sight glasses - Part 1: For holders with recess |
| DIN 73365-3-1970 | 柴油機噴射泵.第3部分:壓力管道連接件 | Injection pumps for Diesel engines; pressure pipe connections |
| DIN 74281-1-2000 | 氣壓制動設備.壓力容器.第1部分:鋼和鋁制焊接單室壓力容器的度量方法 | Air braking systems - Pressure vessels - Part 1: Measures of welded steel and aluminium single chamber pressure vessels |
| DIN 74315-1999 | 非釬焊壓力連接聯結器.彎頭體 | Non-soldering compression couplings - Elbow body |
| DIN 74326-1984 | 氣壓制動系統.連接件壓力試驗.連接尺寸 | Air braking systems; pressure test connection; connecting dimensions |
| DIN 75551-1988 | 汽車的壓力計 | Pressure gauges for automobiles |
| DIN 75553-1992 | 壓力傳感器 | Pressure sensor |
| DIN 75554-1992 | 壓力表 | Pressure gauges |
| DIN 7584-1980 | 家用安裝水管配件.壓力為10巴的平密封墊帶外螺紋的鋼管接管嘴 | Water-fittings for house installation; steal tube nozzles with external thread, flat sealing up to working pressure of 10 bar |
| DIN 7585-1980 | 家用安裝水管配件.壓力為10巴的平密封套管 | Water-fittings for house installation; sleeves, flat sealing up to work pressure of 10 bar |
| DIN 7588-1994 | 家裝設備用水管配件.平密封螺旋接頭.壓力10巴的一端帶內螺紋,另一端帶鋼管噴嘴、銅管噴嘴或套管 | Water-fittings for house installation; boltings with flat seal; one side threaded coupling with inside-thread, on the other side steel tube nozzle, copper tube nozzle or sleeve PN 10 |
| DIN 7589-1994 | 家裝設備用水管配件.平密封螺旋接頭.壓力10巴的一端帶外螺紋,另一端帶鋼管噴嘴、銅管噴嘴和套管 | Water-fittings for house installation; boltings with flat seal; one side threaded coupling with outside-thread, on the other side steel tube nozzle, copper tube nozzle or sleeve PN 10 |
| DIN 7591-1981 | 家用設備的水管配件.公稱壓力10巴的兩端用軟管連接的帶扁平墊圈的螺紋連接管 | Water fittings for domestic installation; Screwed unions with flat gasket for hose connection on either side, designed for nominal pressure 10 |
| DIN 7592-1981 | 家用安裝水管配件.標稱工作壓力為10巴以下的銅管管嘴 | Water-fittings for house installation; copper tube nozzles up to working pressure of 10 bar |
| DIN 7593-1981 | 家用設備的水管配件.公稱壓力為10巴以下的兩端用銅管連接的帶墊圈的螺旋連接管 | Water fittings for domestic installation; Screwed unions with gasket for connection to copper tube on either side, designed for nominal pressure 10 |
| DIN 80006-1998 | 船舶和海上技術.牽引裝置的壓力點.符號和布局 | Ships and marine technology - Points of pressure for tugs - Symbols and arrangement |
| DIN 8063-1-1986 | 未增塑聚氯乙烯壓力管道用管連接組件和接頭.承口彎頭尺寸 | Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (U-PVC) pressure pipelines; dimensions of socket bends |
| DIN 8063-11-1980 | 未增塑聚氯乙烯(剛性 PVC)壓力管道的管道連接和管道配件.第11部分:粘合用基體為銅鋅合金(黃銅)的套管尺寸 | Pipe Joints and Pipe Fittings for Pipes under Pressure made of Unplasticized Polyvinyl Chloride (Rigid PVC); Sockets with Primary Element of Copper-Zinc-Alloy (Brass) for Bonding; Dimensions |
| DIN 8063-12-1987 | 未增塑聚氯乙烯壓力管道的管連接組件和接頭.帶法蘭的和承口接頭的尺寸 | Pipe joint assemblies and fittings of unplasticized polyvinyl chloride (U-PVC) pressure pipelines; dimensions of flanged and socket fittings |
| DIN 8063-2-1980 | 未增塑聚氯乙烯(剛性 PVC)壓力管道的管道連接和管道配件.第2部分:粘合用注塑彎頭尺寸 | Pipe Joints and Pipe Fittings for Pipes under Pressure made of Unplasticized Polyvinyl Chloride (Rigid PVC); Bends Made by Injection Moulding for Bonding; Dimensions |
| DIN 8063-4-1983 | 未增塑聚氯乙烯壓力管道用管連接組件和接頭.內外螺母、法蘭盤、密封件.尺寸 | Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (PVC-U) pressure pipes; bushings, flanges, seals; dimensions |
| DIN 8063-5-1999 | 未增塑聚氯乙烯壓力管道用管接頭和元件(PVC-U).第5部分:一般質量要求、試驗 | Pipe joints components of unplasticized poly(vinyl chloride) (PVC-U) for pipes under pressure - Part 5: General quality requirements, testing |
| DIN 8063-6-2002 | 非增塑聚氯乙烯壓力管道連接件和配件.第6部分:溶劑粘結用壓鑄彎頭.尺寸 | Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure - Part 6: Injection-moulded elbows for solvent cementing; Dimensions |
| DIN 8063-7-1980 | 未增塑聚氯乙烯(未增塑 PVC)壓力管道的管道連接和管道配件.第2部分:冷粘合注塑三通和支管尺寸 | Pipe joints and their elements of unplasticized polyvinylchloride (unplasticized PVC) under pressure; tees and branches of injection moulded for cold welding, dimensions |
| DIN 8076-1-1984 | 熱塑性塑料壓力管道.聚乙烯管道的金屬壓縮接頭.一般質量要求、檢驗 | Thermoplastics pressure pipelines; metal compression fittings for polyethylene (PE) pipes; general quality requirements; testing |
| DIN 8076-3-1994 | 熱塑性塑料壓力管道.第3部分.聚乙烯管道的塑料接頭.一般質量要求和試驗 | Pressure pipelines made from thermoplastics materials - Part 3: Plastic joints for PE pipes; general quality requirements, testing |
| DIN 810-1986 | 機床.壓力機.沖壓工具的柄布滑塊孔.尺寸 | Machine tools; presses; slide holes for shanks of press tools; dimensions |
| DIN 8190-1988 | 30°壓力角的逆齒（無聲）鏈 | Inverted tooth (silent) chains with 30° pressure angle |
| DIN 83402-1-2006 | 壓力為1.1巴或3巴及以下的尺寸600×400的人孔蓋.第1部分:組件和安裝 | Manhole covers 600 × 400 for pressures up to 1,1 bar or 3 bar - Part 1: Assembly, installation |
| DIN 83402-2-2006 | 壓力在1.1巴至3巴及以下的尺寸為600×400的人孔蓋.第2部分:井蓋框架 | Manhole covers 600 × 400 for pressures up to 1,1 bar or 3 bar - Part 2: Frames, covers |
| DIN 83412-1-2001 | 壓力不超過3巴的橢圓形人孔蓋(ISO-E型).第1部分:組件、安裝 | Elliptical manhole covers (ISO-type E) for pressures up to 3 bar - Part 1: Assembly, installation |
| DIN 83412-2-2001 | 壓力達3巴的橢圓形人孔蓋(ISO-E型).第2部分:框架,蓋 | Elliptical manhole covers (ISO-type E) for pressures up to 3 bar - Part 2: Frames, covers |
| DIN 85005-7-1999 | 船舶和航海技術.技術文獻的圖形符號.第7部分:壓力液體艙 | Ships and marine technology - Graphical symbols for technical documentation - Part 7: Pressure tanks |
| DIN 8583-1-2003 | 壓力成形加工工藝.第1部分:分類、細分類、術語和定義 | Manufacturing processes forming under compressive conditions - Part 1: General; Classification, subdivision, terms and definitions |
| DIN 8583-2-2003 | 壓力成形加工工藝.第2部分:軋制.分類、細分類、術語和定義 | Manufacturing processes forming under compressive conditions - Part 2: Rolling; Classification, subdivision, terms and definitions |
| DIN 8583-3-2003 | 壓力成形加工工藝.第3部分:自由成形.分類、細分類、術語和定義 | Manufacturing processes forming under compressive conditions - Part 3: Free forming; Classification, subdivision, terms and definitions |
| DIN 8583-4-2003 | 壓力成形加工工藝.第4部分:模具成形.分類、細分類、術語和定義 | Manufacturing processes forming under compressive conditions - Part 4: Die forming; Classification, subdivision, terms and definitions |
| DIN 8583-5-2003 | 壓力成形加工工藝.第5部分:壓印成形.分類、細分類、術語和定義 | Manufacturing processes forming under compressive conditions - Part 5: Indentation-forming; Classification, subdivision, terms and definitions |
| DIN 8583-6-2003 | 壓力成形加工工藝.第6部分:擠出.分類、細分類、術語和定義 | Manufacturing processes forming under compressive conditions - Part 6: Extrusion; Classification, subdivision, terms and definitions |
| DIN 86001-1997 | 船舶管道.壓力等級.試驗 | Pipelines on ships - Pressure ratings, tests |
| DIN 86021-2002 | 銅合金鑄造法蘭.公稱壓力為10、16、25的法蘭設計原則 | Cast flanges of copper alloys - Principles of design for nominal pressure 10, 16, 25 |
| DIN 86029-1987 | 焊接用高頸松套法蘭.公稱壓力10 | Hubbed slip-on flanges for welding; nominal pressure 10 |
| DIN 86030-1987 | 焊接用高頸松套法蘭.公稱壓力16 | Hubbed slip-on flanges for welding; nominal pressure 16 |
| DIN 86041-1-1996 | 焊接法蘭.第1部分:油箱和海水箱.公稱壓力10和16 | Welding Flanges - Part 1: Tanks and sea boxes, nominal pressure 10 and 16 |
| DIN 86041-2-1996 | 焊接法蘭.第2部分:舷外接頭.公稱壓力10、16、40 | Welding flanges - Part 2: Outboard connections, nominal pressure 10, 16, 40 |
| DIN 86042-1978 | 盲孔板( 雙孔法蘭).按公稱壓力10和16設計的配合尺寸 | Dummy Hole Plates (Spectacle Flanges); Mating Dimensions according to Nominal Pressure 10 and 16 |
| DIN 86059-1976 | 公稱壓力為10的鋼管用帶固定套環的法蘭管悶頭 | Flanged bulkhead pieces with fixing collar, for steel tubes, nominal pressure 10 |
| DIN 86061-1976 | 公稱壓力為10 的鋼管用帶管法蘭的連接套管. | Connecting sockets with pipe flange, for steel tubes, nominal pressure 10 |
| DIN 86064-1976 | 公稱壓力為10的鋼管用帶管法蘭和固定環的連接套管. | Connecting sockets with pipe flange and fixing collar, for steel tubes, nominal pressure 10 |
| DIN 86071-1992 | 法蘭用全密封面墊片.公稱壓力為6、10、16、25 | Full face gaskets for flanges; nominal pressures 6, 10, 16, 25 |
| DIN 86110-1988 | 船舶維護油箱管道系統.灌裝與壓力平衡設備.探測管 | Ship service tank piping systems; filing and pressure equalizing equipment; sounding pipes |
| DIN 86201-2000 | 船上消防設施的國際海岸連接用連接件.公稱壓力16 | Fittings for international shore connection of fire extinguishing installations on ships - Nominal pressure 16 |
| DIN 86202-1989 | 船舶用銅制公稱壓力16的C 型消防帶聯接器 | Delivery fire hose coupling type C, PN 16; made of brass, for use on ships |
| DIN 86203-1989 | 船舶用銅制公稱壓力16的B 型消防帶聯接器 | Delivery fire hose coupling type B, PN 16; made of brass, for use on ships |
| DIN 86204-1993 | 船舶用黃銅制公稱壓力16的C型整體消防軟管接頭 | Solid fire hose coupling type C, PN 16; made of brass, for use on ships |
| DIN 86205-1993 | 船舶用黃銅制公稱壓力16的B型整體消防軟管接頭 | Solid fire hose coupling type B, PN 16; made of brass for use on ships |
| DIN 86206-1996 | 船用公稱壓力PN 16 C 型滅火水龍帶黃銅管帽 | Cap fire hose coupling type C, PN 16, made of brass for use on board ships |
| DIN 86207-1996 | 船用公稱壓力PN 16 B型滅火水龍帶黃銅管帽 | Cap fire hose coupling type B, PN 16, made of brass for use on board ships |
| DIN 86211-1991 | 公稱壓力（PN）16、帶C或B型消防軟管管接頭和帶法蘭連接的滅火閥 | Fire valves for PN 16, with fire hose couplings type C or B and with flange connection |
| DIN 8650-1985 | 機床.前開式機械能壓力機.驗收條件 | Machine tools; open front mechanical power presses; acceptance conditions |
| DIN 8651-1990 | 機床.雙柱偏心壓力機.驗收條件 | Machine tools; straight sided power presses; acceptance conditions |
| DIN 87101-2003 | DN為50-150、標稱壓力為1的垂直自閉式止回閥(止回排水閥).標稱壓力為10的法蘭的配合尺寸 | Non-return flaps (storm valves), self-closing, vertical type, DN 50 up to DN 150, PN 1 - Mating dimensions for flanges according to PN 10 |
| DIN 87151-1-1954 | 過濾器.額定寬度40至200、額定壓力2.5、按照額定壓力10連接尺寸法蘭的灰鑄鐵粗濾器.匯編和安裝尺寸 | Filters; grey cast-iron coarse filters, rated width 40 up to 200, rated pressure 2.5, with flange fitting dimensions according to rated pressure 10, compilation and fitting dimensions |
| DIN 87151-2-1954 | 過濾器.第2部分:具有符合額定壓力 10 的法蘭安裝尺寸的額定壓力為 2.5、額定寬度范圍為 40 - 200 的灰鑄鐵 | Filters; grey cast-iron coarse filters, rated width 40 up to 200, rated pressure 2.5, with flange fitting dimensions according to rated pressure 10, inventories |
| DIN 8906-1990 | 制冷系統用40公稱壓力擴口法蘭的非釬焊接壓緊管接頭 | PN 40 flared flange solderless compression couplings for use in refrigerating systems |
| DIN 8912-1990 | 制冷系統用40公稱壓力擴口法蘭的非釬焊接壓緊管接頭用的接頭螺母和螺紋堵塞 | Coupling nuts and screwed plugs for use with PN 40 flared flange solderless compression couplings in refrigerating systems |
| DIN 8914-1990 | 制冷系統用40公稱壓力擴口法蘭的非釬焊接壓緊管接頭用的90°錐體密封環和密封蓋 | 90° tapered seal rings and caps for use with PN 40 flared flange solderless compression couplings in refrigerating systems |
| DIN 9370-1985 | 航空和航天.管子.壓力術語分類.計算和設計標準 | Aerospace; tubes; classification, pressure terms; calculation and design criteria |
| DIN 9835-1 Bb.1-1987 | 沖壓模具用彈性體壓力彈簧.彈簧特性 | Elastomer pressure springs for press tools; spring characteristics |
| DIN 9835-3-1984 | 沖壓模具用彈性體壓力彈簧.檢驗和要求 | Elastomer pressure springs for press tools; testing and requirements |
| DIN 9838-2003 | 壓力器具.球形鎖緊凸模固定板.輕載C類 | Tools for pressing - Ball-lock punch retainer - Type C, for light duty |
| DIN CEN/TS 12666-2-2006 | 非壓力地下排水和污水管道用塑料管道系統.聚丙烯(PE).第2部分:一致性評估指南.德文版本CEN/TS 12666-2-2005 | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 12666-2:2005 |
| DIN CEN/TS 13244-7-2003 | 通用、排水和污水用地下和地上壓力系統用塑料管道系統.聚乙烯.第7部分:合格評定指南 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity; German version CEN/TS 13244-7:2003 |
| DIN CEN/TS 14541-2007 | 非壓力設備用塑料管道和配件.未增塑聚氯乙烯、聚丙烯和聚乙烯材料應用 | Plastics pipes and fittings for non-pressure applications - Utilisation of non-virgin PVC-U, PP and PE materials; German version CEN/TS 14541:2007 |
| DIN CEN/TS 1456-2-2003 | 直埋式和地上排水和排污用壓力塑料管道系統.未增塑聚氯乙烯(PVC-U).第2部分:符合性評定指南 | Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1456-2:2003 |
| DIN CEN/TS 14758-2-2007 | 非壓力地下排水和排污用塑料管道系統.含礦物調節劑的聚丙烯(PP-MD).第2部分:合格性評估指南 | Plastics piping sytems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifier(s) (PP-MD) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 14758-2:2007 |
| DIN CEN/TS 14758-3-2006 | 無壓力地下排水和污水塑料管道系統.含礦物調節劑的聚丙烯(PP-MD).第3部分:安裝指南 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifier(s) (PP-MD) - Part 3: Guidance for installation; German version CEN/TS 14758-3:2006 |
| DIN CEN/TS 15621-2007 | 牲畜飼料.壓力分解后用ICP-AES測定鈣、鈉、磷、鎂、鉀、硫、鐵、鋅、銅、錳、鈷和鉬 | Animal feeding stuffs - Determination of calcium, sodium, phosphorus, magnesium, potassium, sulphur, iron, zinc, copper, manganese, cobalt and molybdenum after pressure digestion by ICP-AES; German version CEN/TS 15621:2007 |
| DIN CEN/TS 1591-4-2007 | 法蘭及其連接件.帶墊圈圓形法蘭連接件的設計原則.第4部分:服從壓力設備指令按設備尺寸做的螺栓連接件裝配職 | Flanges and their joints - Design rules for gasketed circular flange connections - Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive; German version CEN/TS 1591-4:2007 |
| DIN CEN/TS 1852-3-2005 | 無壓力地下排水和排污塑料管道系統.聚丙烯(PP).第3部分:安裝指南 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 3: Guidance for installation; German version CEN/TS 1852-3:2003 + A1:2005 |
| DIN CEN/TS 764-6-2004 | 壓力設備.第6部分:操作說明的結構和內容 | Pressure equipment - Part 6: Structure and content of operating instructions; German version CEN/TS 764-6:2004 |
| DIN EN 10028-1-2003 | 壓力容器用扁平鋼軋材.第1部分:一般要求 | Flat products made of steels for pressure purposes - Part 1: General requirements (includes Amendment A1:2002); German version EN 10028-1:2000 + A1:2002 |
| DIN EN 10028-2 Berichtigung 1-2006 | 壓力容器用扁平鋼軋材.第2部分:具有規定的耐高溫性能的非合金鋼與合金鋼 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties; German version EN 10028-2:2003 - Corrigenda to DIN EN 10028-2:2003-09; German version EN 10028-2:2003/AC:2005 |
| DIN EN 10028-2-2003 | 壓力容器用扁平鋼軋材.第2部分:具有規定的耐高溫性能的非合金鋼與合金鋼 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties; German version EN 10028-2:2003 |
| DIN EN 10028-3-2003 | 壓力容器用扁平鋼軋材.第3部分:經過正火處理的可焊細晶粒鋼 | Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized; German version EN 10028-3:2003 |
| DIN EN 10028-4 Berichtigung 1-2006 | 壓力容器用扁平鋼軋材.第4部分:具有規定的低溫特性的鎳合金鋼.DIN EN 10028-4-2003勘誤 | Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties; German version EN 10028-4:2003, Corrigenda to DIN EN 10028-4:2003:09; German Version EN 10028-4:2003/AC:2005 |
| DIN EN 10028-4-2003 | 壓力容器用扁平鋼軋材.第4部分:具有規定的低溫特性的鎳合金鋼 | Flat products made of steels for pressure purposes - Part 4: Nickel alloyed steels with specified low temperature properties; German version EN 10028-4:2003 |
| DIN EN 10028-5-2003 | 壓力容器用扁平鋼軋材.第5部分:熱軋制的可焊細晶粒鋼 | Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled; German version EN 10028-5:2003 |
| DIN EN 10028-6-2003 | 壓力容器用扁平鋼制品.第6部分:淬火和回火的可焊接細粒鋼 | Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered; German version EN 10028-6:2003 |
| DIN EN 10028-7 Berichtigung 1-2006 | 壓力容器用扁平鋼軋材.第7部分:不銹鋼.DIN EN 10028-7-2000勘誤 | Flat products made of steels for pressure purposes - Part 7: Stainless steels; German version EN 10028-7:2000, Corrigenda to DIN EN 10028-7:2000-06; German version EN 10028-7:2000/AC:2004 |
| DIN EN 10207-2005 | 簡單壓力容器用鋼.鋼板、帶材和棒材的交貨技術條件 | Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars; German version EN 10207:2005 |
| DIN EN 10216-1-2004 | 壓力載荷用無縫鋼管.交貨技術條件.第1部分:特定室溫特性的非合金鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10216-1:2002 + A1:2004 |
| DIN EN 10216-2-2007 | 壓力用無縫鋼管.交貨技術條件.第2部分:帶特定高溫性能的非合金和合金鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10216-2:2002+A2:2007 |
| DIN EN 10216-3-2004 | 壓力載荷用無縫鋼管.交貨技術條件.第3部分:合金細粒鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10216-3:2002 + A1:2004 |
| DIN EN 10216-4-2004 | 壓力載荷用無縫鋼管.交貨技術條件.第4部分:帶特定低溫性能的非合金和合金鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties; German version EN 10216-4:2002 + A1:2004 |
| DIN EN 10216-5-2004 | 壓力用途無縫鋼管.交貨技術條件.第5部分:不銹鋼管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes; German version EN 10216-5:2004 |
| DIN EN 10217-1-2005 | 壓力用途焊接鋼管.交貨技術條件.第1部分:具有室溫下規定性能的非合金鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10217-1:2002 + A1:2005 |
| DIN EN 10217-2-2005 | 壓力用途焊接鋼管.交貨技術條件.第2部分:具有較高溫度下規定性能的電焊非合金和合金鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10217-2:2002 + A1:2005 |
| DIN EN 10217-3-2005 | 壓力用途焊接鋼管.交貨技術條件.第3部分:細粒合金鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10217-3:2002 + A1:2005 |
| DIN EN 10217-4-2005 | 壓力用途焊接鋼管.交貨技術條件.第4部分:具有低溫下規定性能的電焊非合金鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties; German version EN 10217-4:2002 + A1:2005 |
| DIN EN 10217-5-2005 | 壓力用途焊接鋼管.交貨技術條件.第5部分:具有較高溫度下規定性能的埋弧焊接非合金和合金鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10217-5:2002 + A1:2005 |
| DIN EN 10217-6-2005 | 壓力用途焊接鋼管.交貨技術條件.第6部分:具有低溫下規定性能的埋弧焊接非合金鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties; German version EN 10217-6:2002 + A1:2005 |
| DIN EN 10217-7-2005 | 壓力用途焊接鋼管.交貨技術條件.第7部分:不銹鋼管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes; German version EN 10217-7:2005 |
| DIN EN 10222-1-2002 | 壓力用鋼鍛件.第1部分:開式模鍛件的一般要求 (包括修改件A1:2002); 德文版本 EN 10222-1:1998 + A1:2002 | Steel forgings for pressure purposes - Part 1: General requirements for open die forgings (includes Amendment A1:2002); German version EN 10222-1:1998 + A1:2002 |
| DIN EN 10222-3-1999 | 壓力用鋼制鍛件.第3部分:規定低溫性能的鎳鋼 | Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties; German version EN 10222-3:1998 |
| DIN EN 10222-4-2001 | 壓力容器用鋼鍛件.第4部分:高彈限強度可焊接細晶粒鋼 | Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength (includes Amendment A1:2001); German version EN 10222-4:1998 + A1:2001 |
| DIN EN 10222-5-2000 | 壓力容器用鋼鍛件.第5部分:馬氏體、奧氏體和奧氏體鐵素體不銹鋼 | Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels; German version EN 10222-5:1999 |
| DIN EN 10226-1-2004 | 有壓力緊固連接件的管道螺紋.第1部分:錐形外螺紋和平行內螺紋.尺寸、公差和名稱與符號 | Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004 |
| DIN EN 10226-2-2005 | 螺紋上有壓力密封接縫的管螺紋.第2部分:錐形外螺紋和錐形內螺紋.尺寸、公差和名稱與符號 | Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation; German version EN 10226-2:2005 |
| DIN EN 10226-3-2005 | 螺紋上有壓力密封接縫的管螺紋.第3部分:通過極限量規驗證 | Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges; German version EN 10226-3:2005 |
| DIN EN 10243-1 Berichtigung 1-2005 | 鋼模鍛件.尺寸公差.第1部分:落錘鍛造件和垂直壓力鍛造件 | Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings; German version EN 10243-1:1999, Corrigenda to DIN EN 10243-1:2000-06; German version EN 10243-1:1999/AC:2005 |
| DIN EN 10243-1 Berichtigung 2-2007 | 鋼模鍛件.尺寸公差.第1部分:落錘和立式壓力機鍛件 | Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings; German version EN 10243-1:1999, Corrigenda to DIN EN 10243-1:2000-06 |
| DIN EN 10243-1-2000 | 鋼模鍛件.尺寸公差.第1部分:落錘和立式壓力機鍛件 | Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings; German version EN 10243-1:1999 |
| DIN EN 10273-2000 | 規定高溫性能的壓力容器用熱軋可焊鋼棒 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties; German version EN 10273:2000 |
| DIN EN 10275-1999 | 金屬材料.管環液壓壓力試驗 | Metallic materials - Tube ring hydraulic pressure test; German version EN 10275:1999 |
| DIN EN 12007-1-2000 | 燃?xì)夤?yīng)系統.最大使用壓力小于等于16bar的管道.第1部分:一般功能推薦規范 | Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional recommendations; German version EN 12007-1:2000 |
| DIN EN 12007-2-2000 | 燃?xì)夤?yīng)系統.最大使用壓力小于等于16bar的管道.第2部分:聚乙烯管專用功能推薦規范(最大使用壓力小于等于10 | Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional recommendations for polyethylene (MOP up to and including 10 bar); German version EN 12007-2:2000 |
| DIN EN 12007-3-2000 | 燃?xì)夤?yīng)系統.最大使用壓力小于等于16bar的管道.第3部分:鋼專用功能推薦規范 | Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional recommendations for steel; German version EN 12007-3:2000 |
| DIN EN 12007-4-2000 | 燃?xì)夤?yīng)系統.最大使用壓力小于等于16bar的管道.第4部分:修復管道的專用功能推薦規范 | Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 4: Specific functional recommendations for renovation; German version EN 12007-4:2000 |
| DIN EN 12094-10-2003 | 固定消防系統.氣體滅火系統元件.第10部分:壓力計和壓力開關的要求和試驗方法 | Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches; German version EN 12094-10:2003 |
| DIN EN 12094-5-2006 | 固定式消防系統.氣體滅火系統元件.第5部分:高和低壓力選擇器閥及其啟動器的要求和試驗方法 | Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators; English version of DIN EN 12094-5:2006-07 |
| DIN EN 12263-1999 | 制冷設備和熱力泵.壓力極限用安全開關設備.要求和試驗 | Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests; German version EN 12263:1998 |
| DIN EN 12266-1-2003 | 工業用閥門.閥門試驗.第1部分:壓力試驗、試驗程序和驗收準則.強制性要求 | Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements; German version EN 12266-1:2003 |
| DIN EN 12295-1999 | 塑料管道系統.熱水和冷水用熱塑性塑料管和相關管件.管接頭耐循環壓力的檢測方法 | Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test methods for resistance of joints to pressure cycling; German version EN 12295:1999 |
| DIN EN 12327-2000 | 燃?xì)夤?yīng)系統.壓力試驗、試運行停止試運行過程.功能要求 | Gas supply systems - Pressure testing, commissioning and decomissioning procedures - Functional requirements; German version EN 12327:2000 |
| DIN EN 12350-7-2000 | 新澆混凝土試驗.第7部分:空氣含量.壓力法 | Testing fresh concrete - Part 7: Air content; Pressure methods; German version EN 12350-7:2000 |
| DIN EN 12365-2-2003 | 建筑五金.門、窗、百葉窗和幕墻用密封墊和擋風雨條.第2部分:線性壓力試驗方法 | Building hardware - Gaskets and weatherstripping for doors, windows, shutters and curtain walling - Part 2: Linear compression force test methods; German version EN 12365-2:2003 |
| DIN EN 12392-2000 | 鋁和鋁合金.鍛造產品.壓力設備生產裝備特殊要求 | Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment; German version EN 12392:2000 |
| DIN EN 1254-4-1998 | 銅和銅合金.管配件.第4部分:把其它連接端頭和毛細管或壓力接頭相連接的管件 | Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends; German version EN 1254-4:1998 |
| DIN EN 12541-2003 | 衛生便池.壓力沖洗閥和自動關閉沖水閥 | Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10; German version EN 12541:2002 |
| DIN EN 12561-3-2003 | 鐵路應用.儲罐車.第3部分:壓力下液化氣用底部裝卸式裝置; 德文版本 EN 12561-3:2002 | Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure; German version EN 12561-3:2002 |
| DIN EN 12573-2-2000 | 焊接固定無壓力熱塑性塑料槽罐.第2部分:立式圓柱形槽罐的計算 | Welded static non-pressurised thermoplastic tanks - Part 2: Calculation of vertical cylindrical tanks; German version EN 12573-2:2000 |
| DIN EN 12621-2006 | 壓力下涂層材料的供應和循環用機器.安全性要求 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements English version of DIN EN 12621:2006-05 |
| DIN EN 12645-1998 | 壓力表.汽車輪胎的壓力和充氣檢驗設備.計量、要求和試驗 | Pressure gauges - Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles - Metrology, requirements and testing; German version EN 12645:1998 |
| DIN EN 12697-25-2005 | 瀝青混合物.熱混瀝青的試驗方法.第25部分:循環壓力試驗 | Bituminous mixtures - Test methods for hot mix asphalt - Part 25: Cyclic compression test; German version EN 12697-25:2005 |
| DIN EN 12778-2005 | 烹飪器具.家用壓力炊具 | Cookware - Pressure cookers for domestic use; German version EN 12778:2002 + AC:2003 + A1:2005 |
| DIN EN 12789-2003 | 高級工業陶瓷.大氣壓力下陶瓷復合物高溫機械特性.撓曲強度測定 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength; German version EN 12789:2002 |
| DIN EN 12865-2001 | 建筑物構件和單元件濕熱性能.脈動空氣壓力下外墻系統防雨性能測定 | Hygrothermal performance of building components and building elements - Determination of the resistance of external wall systems to driving rain under pulsating air pressure; German version EN 12865:2001 |
| DIN EN 1293-1999 | 氣動壓力排水管道構件一般要求 | General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers; German version EN 1293:1999 |
| DIN EN 12952-2-2002 | 水管鍋爐和輔助設備.第2部分:鍋爐和附件的壓力零件用材料; 德文版本 EN 12952-2:2001 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories; German version EN 12952-2:2001 |
| DIN EN 12952-3-2002 | 水管鍋爐和輔助設備.第3部分:壓力零件的設計和計算; 德文版本 EN 12952-3:2001 | Water tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts; German version EN 12952-3:2001 |
| DIN EN 12952-5-2002 | 水管鍋爐和輔助設備.第5部分:鍋爐壓力部件的工藝和結構; 德文版本 EN 12952-5:2001 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler; German version EN 12952-5:2001 |
| DIN EN 12952-6-2002 | 水管鍋爐和輔助設備.第6部分:鍋爐壓力部件在建造、文件化和作標記過程中的檢驗; 德文版本 EN 12952-6:2002 | Water-tube boilers and auxiliary installations - Part 6: Inspection during construction, documentation and marking of pressure parts of the boiler; German version EN 12952-6:2002 |
| DIN EN 12953-2-2002 | 殼體鍋爐.第2部分:鍋爐和附件壓力部件用材料; 德文版本 EN 12953-2:2002 | Shell boilers - Part 2: Materials for pressure parts of boilers and accessories; German version EN 12953-2:2002 |
| DIN EN 12953-3-2002 | 殼體鍋爐.第3部分:壓力部件的設計和計算; 德文版本 EN 12953-3:2002 | Shell boilers - Part 3: Design and calculation for pressure parts; German version EN 12953-3:2002 |
| DIN EN 12953-4-2002 | 殼體鍋爐.第4部分:鍋爐壓力部件的工藝和結構; 德文版本 EN 12953-4:2002 | Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler; German version EN 12953-4:2002 |
| DIN EN 12953-5-2002 | 殼體鍋爐.第5部分:鍋爐壓力部件在建造、文件化和作標記過程中的檢驗; 德文版本 EN 12953-5:2002 | Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler; German version EN 12953-5:2002 |
| DIN EN 13016-1-2007 | 液化石油產品.蒸氣壓力.第1部分:氣體飽和蒸氣壓(ASVP)的測定和計算的干蒸氣壓當量值(DVPE) | Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE); German version EN 13016-1:2007 |
| DIN EN 13016-2-2007 | 液化石油產品.蒸氣壓力.第2部分:40℃和100℃之間絕對壓力(AVP)的測定 | Liquid petroleum products - Vapour pressure - Part 2: Determination of absolute pressure (AVP) between 40 °C and 100 °C; German version EN 13016-2:2007 |
| DIN EN 13042-5-2004 | 空心玻璃的生產、處理和加工用機械和設備.安全要求.第5部分:壓力機 | Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses; German version EN 13042-5:2003 |
| DIN EN 13094-2004 | 危險貨物運輸用容器.工作壓力不超過0.5巴的金屬容器.設計和建造 | Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction; German version EN 13094:2004 |
| DIN EN 13160-2-2003 | 檢漏系統.第2部分:壓力和真空系統 | Leak detection systems - Part 2: Pressure and vacuum systems; German version EN 13160-2:2003 |
| DIN EN 13184-2001 | 無損檢測.滲漏試驗.壓力改變方法 | Non-destructive testing - Leak test - Pressure change method; German version EN 13184:2001 |
| DIN EN 13244-1-2003 | 地下和地上通用壓力排水系統的塑料管道系統.聚乙烯(PE).第1部分:總則 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1: General; German version EN 13244-1:2002 |
| DIN EN 13244-2-2003 | 地下和地上通用壓力排水系統的塑料管道系統.聚乙烯(PE).第2部分:管道 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 2: Pipes; German version EN 13244-2:2002 |
| DIN EN 13244-3-2003 | 地下和地上通用壓力排水排污系統的塑料管道系統.聚乙烯(PE).第3部分:配件 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3: Fittings; German version EN 13244-3:2002 |
| DIN EN 13244-4-2003 | 地下和地上通用壓力排水系統的塑料管道系統.聚乙烯(PE).第4部分:閥門 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4: Valves; German version EN 13244-4:2002 |
| DIN EN 13244-5-2003 | 地下和地上通用壓力排水系統的塑料管道系統.聚乙烯(PE).第5部分:系統適用性 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 5: Fitness for purpose of the system; German version EN 13244-5:2002 |
| DIN EN 13311-3-2001 | 生物技術.容器性能標準.第3部分:玻璃壓力容器 | Biotechnology - Performance criteria for vessels - Part 3: Glass pressure vessels; German version EN 13311-3:2001 |
| DIN EN 13316-2003 | 危險物品運輸槽罐車.槽罐車輔助設備.壓力平衡底閥 | Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve; German version EN 13316:2002 |
| DIN EN 13445 Bb.1-2002 | 防火壓力容器.第7部分:合格評定程序使用指南 | Unfired pressure vessels - Part 7: Guidance on the use of the conformity assessment procedures; German version CEN/CR 13445-7:2002 |
| DIN EN 13445-1-2002 | 未燃燒式壓力容器.第1部分:總則; 德文版本 EN 13445-1:2002 | Unfired pressure vessels - Part 1: General; German version EN 13445-1:2002 |
| DIN EN 13445-1/A1-2007 | 非受火壓力容器.第1部分:總則 | Unfired pressure vessels - Part 1: General; German version EN 13445-1:2002/A1:2007 |
| DIN EN 13445-1/A2-2007 | 非燃燒壓力容器.第1部分:總則 | Unfired pressure vessels - Part 1: General; German version EN 13445-1:2002/A2:2006 |
| DIN EN 13445-2-2002 | 未燃燒式壓力容器.第2部分:材料; 德文版本 EN 13445-2:2002 | Unfired pressure vessels - Part 2: Materials; German version EN 13445-2:2002 |
| DIN EN 13445-2/A1-2007 | 非受火壓力容器.第2部分:材料 | Unfired pressure vessels - Part 2: Materials; German version EN 13445-2:2002/A1:2007 |
| DIN EN 13445-2/A2-2007 | 非燃燒壓力容器.第2部分:材料 | Unfired pressure vessels - Part 2: Materials; German version EN 13445-2:2002/A2:2006 |
| DIN EN 13445-3-2003 | 耐火壓力容器.第3部分:設計 | Unfired pressure vessels - Part 3: Design; German version EN 13445-3:2002 |
| DIN EN 13445-3/A11-2007 | 非燃燒壓力容器.第3部分:設計 | Unfired pressure vessels - Part 3: Design; German version EN 13445-3:2002/A11:2006 |
| DIN EN 13445-3/A2-2007 | 非受火壓力容器.第3部分:設計 | Unfired pressure vessels - Part 3: Design; German version EN 13445-3:2002/A2:2007 |
| DIN EN 13445-3/A3-2007 | 非受火壓力容器.第3部分:設計 | Unfired pressure vessels - Part 3: Design; German version EN 13445-3:2002/A3:2007 |
| DIN EN 13445-3/A4-2005 | 非受火壓力容器.第3部分:設計 | Unfired pressure vessels - Part 3: Design; German version EN 13445-3:2002/A4:2005 |
| DIN EN 13445-3/A5-2006 | 未燃燒式壓力容器.第3部分:設計 | Unfired pressure vessels - Part 3: Design; German version EN 13445-3:2002/A5:2005 |
| DIN EN 13445-3/A6-2006 | 非受火壓力容器.第3部分:設計 | Unfired pressure vessels - Part 3: Design; German version EN 13445-3:2002/A6:2006 |
| DIN EN 13445-3/A8-2006 | 非點火的壓力容器.第3部分:設計 | Unfired pressure vessels - Part 3: Design; German version EN 13445-3:2002/A8:2006 |
| DIN EN 13445-4-2002 | 未燃燒式壓力容器.第4部分:制造; 德文版本 EN 13445-4:2002 | Unfired pressure vessels - Part 4: Fabrication; German version EN 13445-4:2002 |
| DIN EN 13445-4/A2-2007 | 非燃燒式壓力容器.第4部分:制造 | Unfired pressure vessels - Part 4: Fabrication; German version EN 13445-4:2002/A2:2006 |
| DIN EN 13445-5-2002 | 未燃燒式壓力容器.第5部分:檢驗和測試; 德文版本 EN 13445-5:2002 | Unfired pressure vessels - Part 5: Inspection and testing; German version EN 13445-5:2002 |
| DIN EN 13445-5/A1-2007 | 非受火壓力容器.第5部分:檢測和試驗 | Unfired pressure vessels - Part 5: Inspection and testing; German version EN 13445-5:2002/A1:2007 |
| DIN EN 13445-5/A2-2005 | 不用火加熱的壓力容器.第5部分:檢測和試驗 | Unfired pressure vessels - Part 5: Inspection and testing; German version EN 13445-5:2002/A2:2005 |
| DIN EN 13445-5/A3-2006 | 非燃燒壓力容器.第5部分:檢測和試驗 | Unfired pressure vessels - Part 5: Inspection and testing; German version EN 13445-5:2002/A3:2006 |
| DIN EN 13445-5/A4-2007 | 非燃燒壓力容器.第5部分:檢測和試驗 | Unfired pressure vessels - Part 5: Inspection and testing; German version EN 13445-5:2002/A4:2006 |
| DIN EN 13445-5/A5-2006 | 非燃燒壓力容器.第5部分:檢測和試驗 | Unfired pressure vessels - Part 5: Inspection and testing; English version of DIN EN 13445-5/A5:2006-11 |
| DIN EN 13445-6-2002 | 防火壓力容器.第6部分:球墨鑄鐵壓力容器和壓力部件的設計和制造要求 | Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; German version EN 13445-6:2002 |
| DIN EN 13445-6/A1-2004 | 不用火加熱的壓力容器.第6部分:球墨鑄鐵制壓力容器和壓力部件的設計和制造要求 | Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheriodal graphite cast iron; German version EN 13445-6:2002/A1:2004 |
| DIN EN 13445-6/A2-2007 | 非燃燒壓力容器.第6部分:球墨鑄鐵制壓力容器和壓力部件的設計和制造要求 | Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; English version of DIN EN 13445-6/A2:2007-03 |
| DIN EN 13523-24-2005 | 卷材覆層金屬.試驗方法.第24部分:耐粘結性和壓力標記 | Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking; German version EN 13523-24:2004 |
| DIN EN 13541-2001 | 建筑物玻璃.保險玻璃.防爆壓力試驗和分類 | Glass in building - Security glazing - Testing and classification of resistance against explosion pressure; German version EN 13541:2000 |
| DIN EN 13566-2-2006 | 地下非壓力排水排污網翻新用塑料管道系統.第2部分:連續管加襯.德文版本 EN 13566-2-2005 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes; German version EN 13566-2:2005 |
| DIN EN 13566-4-2003 | 地下非壓力排水排污網翻新用塑料管道系統.第4部分:硫化管加襯 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes; German version EN 13566-4:2002 |
| DIN EN 13566-7-2007 | 地下非壓力排水和排污網絡的修繕用塑料管道系統.第7部分:螺旋纏繞管內襯 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes; German version EN 13566-7:2007 |
| DIN EN 13598-1-2003 | 無壓力地下排水和排污用塑料管道系統.非增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE).第1部分:包括淺層檢 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers; German version EN 13598-1:2003 |
| DIN EN 13631-6-2002 | 民用爆炸物.高級炸藥.第6部分:抗流體靜壓力的測定; 德文版本 EN 13631-6:2002 | Explosives for civil uses - High explosives - Part 6: Determination of resistance to hydrostatic pressure; German version EN 13631-6:2002 |
| DIN EN 13673-1-2003 | 氣體和蒸氣的最大爆炸壓力和最大壓升的測定.第1部分:最大爆炸壓力的測定 | Determination of the maximum explosion pressure and the maximum pressure rise of gases and vapours - Part 1: Determination of the maximum explosion pressure; German version EN 13673-1:2003 |
| DIN EN 13673-2 Berichtigung 1-2007 | 氣體和蒸汽的最大爆炸壓力和最大壓升速率的測定.第2部分:最大爆炸壓升速率的測定 | Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 2: Determination of the maximum rate of explosion pressure rise; German version EN 13673-2:2005, Corrigenda to DIN EN 13673-2:2005-12 |
| DIN EN 13673-2-2005 | 氣體和蒸氣的最大爆炸壓力和最大壓升速率的測定.第2部分:最大壓升爆炸速率的測定.德文版本EN 13673-2-2005 | Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 2: Determination of the maximum rate of explosion pressure rise; German version EN 13673-2:2005 |
| DIN EN 13736 Berichtigung 1-2006 | 機床的安全.氣動壓力 | Safety of machine tools - Pneumatic presses; German version EN 13736:2003, Corrigenda to DIN EN 13736:2003-06; German version EN 13736:2003/AC:2004 |
| DIN EN 13736-2003 | 機床安全.氣動壓力機 | Safety of machine tools - Pneumatic presses; German version EN 13736:2003 |
| DIN EN 13763-12-2004 | 民用爆炸物.雷管和傳爆管.第12部分:雷管抗流體靜壓力的測定 | Explosives for civil uses - Detonators and relays - Part 12: Determination of resistance to hydrostatic pressure; German version EN 13763-12:2003 |
| DIN EN 13774-2003 | 最大工作壓力為16bar及以下的配氣系統用閥.性能要求 | Valves for gas distribution systems with maximum operating pressure 16 bar - Performance requirements; German version EN 13774:2003 |
| DIN EN 13785 Berichtigung 1-2007 | 不包括在EN 12864中流速≤100 kg/h、最大標稱輸出壓力≤4 bar的調節器和丁烷、丙烷或其混合物用與調節器相 | Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butan, propane or their mixtures; German version EN 13785:2005, Corrigenda to DIN EN 13785:2005-06; German version EN 13785:2005/AC:2007 |
| DIN EN 13785-2005 | 丁烷、丙烷和其混合物用最大容量100 kg/h及以下和最大輸出壓力4巴及以下的調節器及其相關安全設備(EN 12864 | Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butan, propane ot their mixtures; German version EN 13785:2005 |
| DIN EN 13786-2004 | 丁烷、丙烷或其混合物用最大輸出壓力4巴以下(包括4巴)和最大容量100 kg/h以下(包括100 kg/h)的自動轉換閥及 | Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures; German version EN 13786:2004 |
| DIN EN 13787-2002 | 入口壓力達100巴的氣體壓力調節器和相關安全裝置用彈性體; 德文版本 EN 13787:2001 | Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar; German version EN 13787:2001 |
| DIN EN 13805-2002 | 食品.微量元素的測定.壓力分解; 德文版本 EN 13805:2002 | Foodstuffs - Determination of trace elements - Pressure digestion; German version EN 13805:2002 |
| DIN EN 13900-5-2005 | 顏料和稀釋劑.擴散方法和在塑料中可擴散性的評定.第5部分:通過過濾器壓力值試驗測定 | Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test; German version EN 13900-5:2005 |
| DIN EN 1401-1-1998 | 非壓力地下排水和污水用塑料管道系統.硬聚氯乙烯(PVC-V).第1部分:管、管件和系統規范 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specification for pipes, fittings and the system; German version EN 1401-1:1998 |
| DIN EN 14025 Berichtigung 1-2005 | 危險貨物運輸箱.金屬壓力箱.設計和建造.DIN EN 14025-2004的勘誤 | Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction; German version EN 14025:2003, Corrigenda to DIN EN 14025:2004-02; German version EN 14025:2003/AC:2005 |
| DIN EN 14025-2004 | 危險貨物運輸箱.金屬壓力箱.設計和建造 | Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction; German version EN 14025:2003 |
| DIN EN 14034-1-2004 | 塵云的爆炸特性測定.第1部分:塵云的最大爆炸壓力p<指數max>的測定 | Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure p<(Index)max> of dust clouds; German version EN 14034-1:2004 |
| DIN EN 14034-2-2006 | 塵云的爆炸特性測定.第2部分:塵云爆炸壓力上升的最大比率(dp/dt)<上標max>的測定 | Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt) of dust clouds English version of DIN EN 14034-2:2006-08 |
| DIN EN 14208-2004 | 可運輸氣瓶.氣體運輸用容量在1000升及以下的焊接壓力鼓形物的規范 | Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction; German version EN 14208:2004 |
| DIN EN 14276-1-2006 | 冷凍系統和熱力泵壓力設備.第1部分:容器.一般要求 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements English version of DIN EN 14276-1:2006-09 |
| DIN EN 14276-2-2007 | 制冷系統和熱泵壓力設備.第2部分:管道.一般要求 | Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements; German version EN 14276-2:2007 |
| DIN EN 14289-2004 | 皮革.物理和機械試驗.水滲透壓力的測定 | Leather - Physical and mechanical tests - Determination of water penetration pressure; German version EN 14289:2003 |
| DIN EN 14364-2006 | 壓力和無壓力排水和排污塑料管道系統.基于不飽和聚酯樹脂的玻璃增強熱固性塑料(GRP)系統.管件、配件和連接 | Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints English version of DIN EN 14364:2006-07 |
| DIN EN 14367-2005 | 有不同壓力區的非可控防回流組件.C類.A型；德文版本 EN 14367-2005 | Non controllable backflow preventer with different pressure zones - Family C, type A; German version EN 14367:2005 |
| DIN EN 14382-2005 | 氣體壓力調節站和裝置用安全設備.用于入口壓力100bar及以下的氣體安全關閉裝置 | Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar; German version EN 14382:2005 |
| DIN EN 14452-2005 | 防飲用水回流污染的裝置.帶大氣壓力孔和移動元件的管阻流器DN10至DN 20. B型D系列 | Devices to prevent pollution by backflow of potable water - Pipe interrupter with atmospheric vent and moving element DN 10 to DN 20 - Family D, type B; German version EN 14452:2005 |
| DIN EN 14453-2005 | 防飲用水回流污染的裝置.帶恒定大氣壓力孔的管阻流器DN10至DN 20. C型D系列 | Devices to prevent pollution by backflow of potable water - Pipe interrupter with permanent atmospheric vent DN 10 to DN 20 - Family D, type C; German version EN 14453:2005 |
| DIN EN 14513-2005 | 可移動儲氣瓶.防爆板壓力釋放裝置(不含乙炔儲氣瓶) | Transportable gas cylinders - Bursting disc pressure relief devices (excluding acetylene gas cylinders); German version EN 14513:2005 |
| DIN EN 1456-1-2001 | 地下和地上排水和排污塑料壓力管道系統.未增塑聚氯乙烯(PVC-U).第1部分:管道元件和系統規范 | Plastics piping systems for buried and above ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for piping components and the system; German version EN 1456-1:2000 |
| DIN EN 14584-2005 | 無損檢驗.聲音排放.在驗證試驗過程中金屬壓力設備的檢驗.AE源的平面位置 | Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources; German version EN 14584:2005 |
| DIN EN 14585-1 Bb.1-2006 | 壓力設備用波紋金屬軟管組件.第2部分:合格評定程序使用指南 | Corrugated metal hose assemblies for pressure applications - Guidance on the use of conformity assessment procedures; English version of DIN EN 14585-1 Supplement 1:2006-04 |
| DIN EN 14585-1-2006 | 壓力設備用波紋金屬軟管組件.第1部分:要求 | Corrugated metal hose assemblies for pressure applications - Part 1: Requirements; German version EN 14585-1:2006 |
| DIN EN 14595-2005 | 危險物品運輸罐.罐的輔助設備.壓力和真空通氣口 | Tanks for transport of dangerous goods - Service equipment for tanks - Pressure and vacuum breather vent; German version EN 14595:2005 |
| DIN EN 14627-2005 | 食品.痕量元素測定.壓力溶解后用氫化原子吸收光譜測定法(HGAAS)測定砷和硒的總量 | Foodstuffs - Determination of trace elements - Determination of total arsenic and selenium by hydride generation atomic absorption spectrometry (HGAAS) after pressure digestion; German version EN 14627:2005 |
| DIN EN 14680-2006 | 非壓力熱塑管道系統用粘合劑.規范 | Adhesives for non-pressure thermoplastic piping systems - Specifications; English version of DIN EN 14680:2006-12 |
| DIN EN 14741-2006 | 熱塑管和管道系統.地下非壓力設施用接頭.通過評估密封壓力測定彈性密封件接頭的長期密封性能的試驗方法 | Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure English version of DIN EN 14741:2006-05 |
| DIN EN 14769-2006 | 瀝青和瀝青粘合劑.用壓力老化容器(PAV)調節加速長期老化 | Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV); German version EN 14769:2005 |
| DIN EN 14801-2006 | 水和廢水管道產品的壓力分類條件 | Conditions for pressure classification of products for water and wastewater pipelines English version of DIN EN 14801:2006-09 |
| DIN EN 14814-2007 | 壓力下流體用熱塑性管道系統的粘合劑.規范 | Adhesives for thermoplastic piping systems for fluids under pressure - Specifications; German version EN 14814:2007 |
| DIN EN 14876-2007 | 可運輸氣瓶.焊接鋼壓力氣罐的周期檢測和試驗 | Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums; English version of DIN EN 14876:2007-04 |
| DIN EN 1489-2000 | 建筑物閥門.壓力安全閥門.試驗和要求 | Building valves - Pressure safety valves - Tests and requirements; German version EN 1489:2000 |
| DIN EN 14893-2006 | LPG設備和組件.容積在150升和1000升之間的可運輸液化石油氣(LPG)焊接鋼壓力鼓 | LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1000 litres; English version of DIN EN 14893:2006-10 |
| DIN EN 1490-2000 | 建筑物閥門.組合型溫度壓力安全閥.試驗和要求 | Building valves - Combined temperature and pressure relief valves - Tests and requirements; German version EN 1490:2000 |
| DIN EN 15266-2007 | 建筑物中工作壓力等于0.5bar的氣體用不銹鋼柔性波管工具 | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar; German version EN 15266:2007 |
| DIN EN 153000-1999 | 總規范.分立的壓力觸點功率半導體裝置(資格認可) | Generic specification: Discrete pressure contact power semiconductor devices (Qualification approval); German version EN 153000:1998 |
| DIN EN 15550-2007 | 動物飼料.壓力消解后用石墨爐原子吸收光譜法(GF-AAS)測定鎘和鉛含量 | Animal feeding stuffs - Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion; German version EN 15550:2007 |
| DIN EN 1594-2000 | 供氣系統.最大工作壓力大于16巴的管道.功能要求 | Gas supply systems - Pipelines for maximum operating pressure over 16 bar - Functional requirements; German version EN 1594:2000 |
| DIN EN 1595-1997 | 硼硅酸鹽玻璃3.3制壓力設備.設計、制造和檢驗總則 | Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing; German version EN 1595:1997 |
| DIN EN 1605-2007 | 建筑用隔熱制品.在特定的壓力負荷和溫度條件下測定變形 | Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions; German version EN 1605:1996 + A1:2006 |
| DIN EN 1653-2000 | 銅和銅合金.鍋爐、壓力容器和熱水存儲設備用板材、薄板材和環材(包括修改件A1-2000) | Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units (includes amendment A1:2000); German version EN 1653:1997 + A1:2000 |
| DIN EN 1671-1997 | 建筑物外壓力排污系統 | Pressure sewerage systems outside buildings; German version EN 1671:1997 |
| DIN EN 1708-1-1999 | 焊接.鋼焊接連接點的基本細節.第1部分:受壓力部件 | Welding - Basic weld joint details in steel - Part 1: Pressurized components; German version EN 1708-1:1999 |
| DIN EN 1775-2007 | 供氣.建筑物用煤氣管道工程.最大工作壓力≤5bar.功能推薦 | Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations; German version EN 1775:2007 |
| DIN EN 1796-2006 | 有或無壓力水供應塑料管道系統.基于不飽和聚酯(UP)的玻璃增強熱硬塑料(GRP) | Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) English version of DIN EN 1796:2006-05 |
| DIN EN 1854-2006 | 氣體燃燒爐和氣體燃燒裝置的壓力監控器 | Pressure sensing devices for gas burners and gas burning appliances; English version of DIN EN 1854:2006-07 |
| DIN EN 1893-2005 | 高級工業陶瓷.大氣壓力高溫環境中陶瓷組分的機械特性.抗拉特性測定 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of tensile properties; German version EN 1893:2005 |
| DIN EN 1894-2005 | 高級工業陶瓷.惰性氣體高溫環境中陶瓷組分的機械特性.有凹槽試樣在壓力荷載下剪切強度的測定 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens; German version EN 1894:2005 |
| DIN EN 1964-2-2002 | 可運輸氣瓶.水容量為0.5升到150升(含150升)的可再填充可運輸無縫鋼瓶設計和制造規范.第2部分:閥門壓力R<上 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 2: Cylinders made of seamless steel with an R<(Index)m> value of 1100 MPa and above; German version EN 1964-2:2001 |
| DIN EN 22858-1993 | 端布抽吸式離心泵(額定壓力16巴).標示、額定功率和尺寸 | End-suction centrifugal pumps (rating 16 bar); designation, nominal duty point and dimensions (ISO 2858:1975); German version EN 22858:1993 |
| DIN EN 2591-612-2002 | 航空航天系列.光電連接件.試驗方法.第612部分:光學元件.電纜附件有效性.電纜軸向壓力 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 612: Optical elements; Effectiveness of cable attachment; Cable axial compression; German and English version EN 2591-612:2002 |
| DIN EN 286-1-1998 | 空氣或氮?dú)庥梅鞘芑鸷?jiǎn)易壓力容器.第1部分:普通壓力容器 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes; German version EN 286-1:1998 |
| DIN EN 286-1/A1-2002 | 裝有空氣或氮?dú)獾暮?jiǎn)易非點火壓力容器.第1部分:通用壓力容器.修改件 A1; 德文版本 EN 286-1:1998/A1:2002 + | Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes; Amendment A1; German version EN 286-1:1998/A1:2002 + AC:2002 |
| DIN EN 286-1/A2-2005 | 罐裝空氣或氮?dú)庥梅鞘芑鸷?jiǎn)易壓力容器.第1部分:通用壓力容器.德國版本 EN 286-1-1998/A2-2005 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes; German version EN 286-1:1998/A2:2005 |
| DIN EN 286-2-1992 | 空氣和氮?dú)庥煤?jiǎn)易不受熱壓力容器.第2部分:汽車和掛車上空氣制動設備和輔助裝置用壓力容器 | Simple unfired pressure vessels designed to contain air or nitrogen; part 2: pressure vessels for air braking and auxiliary systems for motor-vehicles and their trailers; german version EN 286-2:1992 |
| DIN EN 286-3-1994 | 裝空氣或氮?dú)庥玫暮?jiǎn)單的不受燃燒加熱的壓力容器.第3部分:鐵路機車車輛的壓縮空氣制動設備和輔助氣動設備用 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock; German version EN 286-3:1994 |
| DIN EN 286-4-1994 | 裝空氣和氮?dú)庥玫暮?jiǎn)單的不受燃燒加熱的壓力容器.第4部分:軌道車輛中空氣制動設備和氣動輔助裝置用鋁合金制 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock; German version EN 286-4:1994 |
| DIN EN 289-2004 | 橡膠和塑料加工機械.壓力機.安全要求 | Plastics and rubber machines - Presses - Safety requirements; German version of EN 289:2004 |
| DIN EN 3-8-2007 | 便攜式滅火器.第8部分:最小允許壓力≤30巴的滅火器的結構、耐壓和機械性能試驗用對EN 3-7的附加要求 | Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar; English version of DIN EN 3-8:2007-02 |
| DIN EN 303-4-1999 | 供暖鍋爐.第4部分:帶強制送風燃燒爐的供暖鍋爐.功率70kV以下,最大工作壓力3巴的帶強制送風的油燃燒爐的供暖 | Heating boilers - Part 4: Heating boilers with forced draught burners; special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar; terminology, special requirements, testing and marking; German version EN 303-4:1999 |
| DIN EN 303-6-2000 | 采暖鍋爐.第6部分：采用壓力通風燃燒器的采暖鍋爐.標稱輸入不超70kW霧化燃油燃燒器分節鍋爐家庭熱水運行的 | Heating boilers - Part 6: Heating boilers with forced draught burners; specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW; German version EN 303-6:2000 |
| DIN EN 3079-2007 | 航空航天系列.8°30'壓力28000 kPa的管道聯接器.適配器.米制系列.技術規范 | Aerospace series - Pipe coupling 8°30' up to 28000 kPa - Adaptors - Metric series - Technical specification; German and English version EN 3079:2006 |
| DIN EN 3268-2002 | 航空航天系列.鈦合金8°30'管連接件.壓力插頭; 德文版本 EN 3268:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Pressure plug; German version EN 3268:2001 |
| DIN EN 334-2005 | 入口壓力100巴及以下用氣體壓力調節器 | Gas pressure regulators for inlet pressures up to 100 bar; German version EN 334:2005 |
| DIN EN 3688-2004 | 航空航天系列.焊接管用鈦合金制成的T環形填充物.14000kPa標稱壓力 | Aerospace series - T-ring fillers in titanium alloy for welding pipes - 14000 kPa nominal pressure; German and English version EN 3688:2001 + AC:2003 |
| DIN EN 3689-2004 | 航空航天系列.焊接管用鈦合金制成的T環形填充物.28000kPa標稱壓力 | Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28000 kPa nominal pressure; German and English version EN 3689:2001 + AC:2003 |
| DIN EN 437-2003 | 試驗氣體.試驗壓力.設備種類 | Test gases - Test pressures - Appliances categories; German version EN 437:2003 |
| DIN EN 472-1994 | 壓力測量?jī)x.詞匯; 德文版本 EN 472:1994 | Pressure gauges - Vocabulary; German version EN 472:1994 |
| DIN EN 50216-5-2007 | 電力變壓器和電抗器配件.第5部分:液位計、壓力裝置和流量指示器、壓力釋放裝置和脫水通氣裝置 | Power transformer and reactor fittings - Part 5: Liquid level, pressure and flow indicators, pressure relief devices and dehydrating breathers; German version EN 50216-5:2002 + A3:2006 |
| DIN EN 50289-3-15-2004 | 通信電纜.試驗方法規范.第3-15部分:機械試驗方法.海底電纜耐靜水壓力 | Communication cables - Specifications for test methods - Part 3-15: Mechanical test methods - Underwater cable resistance to hydrostatic pressure; German version EN 50289-3-15:2003 |
| DIN EN 50464-1-2007 | 最高壓力不超過36kV的設備用50Hz、50kVA至2500kVA的三相油浸式配電變壓器.第1部分:一般要求 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements; German version EN 50464-1:2007 |
| DIN EN 50464-2-1-2007 | 最高壓力不超過36kV的設備用50Hz、50kVA至2500kVA的三相油浸式配電變壓器.第2-1部分:高壓側和/或低壓側上帶 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-1: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - General requirements; German version EN 50464-2-1:2007 |
| DIN EN 50464-2-2-2007 | 最高壓力不超過36kV的設備用50Hz、50kVA至2500kVA的三相油浸式配電變壓器.第2-2部分:高壓側和/或低壓側上帶 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 1 for use on distribution transformers meeting the requirements of EN 50464-2-1; German version EN 50464-2-2:2007 |
| DIN EN 50464-2-3-2007 | 最高壓力不超過36kV的設備用50Hz、50kVA至2500kVA的三相油浸式配電變壓器.第2-3部分:高壓側和/或低壓側上帶 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-3: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 2 for use on distribution transformers meeting the requirements of EN 50464-2-1; German version EN 50464-2-3:2007 |
| DIN EN 50464-3-2007 | 最高壓力不超過36kV的設備用50Hz、50kVA至2500kVA的三相油浸式配電變壓器.第3部分:載有非正弦電流的變壓器 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 3: Determination of the power rating of a transformer loaded with non-sinusoidal currents; German version EN 50464-3:2007 |
| DIN EN 50464-4-2007 | 最高壓力不超過36kV的設備用50Hz、50kVA至2500kVA的三相油浸式配電變壓器.第4部分:關于增壓式波形槽的要求 | Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 4: Requirements and tests concerning pressurised corrugated tanks; German version EN 50464-4:2007 |
| DIN EN 512/A1-2002 | 纖維水泥制品.壓力管道和接頭.修改件A1:2001; 德文版本 EN 512:1994/A1:2001 | Fibre-cement products - Pressure pipes and joints; Amendment A1:2001; German version EN 512:1994/A1:2001 |
| DIN EN 562-2003 | 氣焊設備.焊接、切割和相關工藝用壓力表 | Gas welding equipment - Pressure gauges used in welding, cutting and allied processes; German version EN 562:2003 |
| DIN EN 60811-3-1-2002 | 電纜絕緣和護套材料.通用試驗方法.第3-1部分:聚氯乙烯化合物的專用方法.高溫壓力試驗.耐裂解試驗 (IEC 6081 | Insulating and sheathing materials of electric cables - Common test methods - Part 3-1: Methods specific to PVC compounds - Pressure test at high temperature, test for resistance to cracking (IEC 60811-3-1:1985 + Corrigendum:1986 + A1:1994 + A2:2001); German version EN 60811-3-1:1995 + A1:1996 + A2:2001 |
| DIN EN 61094-2-1994 | 擴音器的測量.第2部分:可逆法校準實驗室標準擴音器壓力的基本方法 | Measurement microphones; part 2: primary method for pressure calibration of laboratory standard microphones by the reciprocity technique (IEC 61094-2:1992); German version EN 61094-2:1993 |
| DIN EN 61094-5-2003 | 測量傳聲器.第5部分:通過比對進行標準傳聲器工作時的壓力校準方法 | Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison (IEC 61094-5:2001); German version EN 61094-5:2001 |
| DIN EN 61300-2-11-1998 | 光纖互聯裝置和無源部件.基本試驗和測量程序.第2-11部分:試驗:軸向壓力 (IEC 61300-2-11:1995); 德文版本 E | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-11: Tests; axial compression (IEC 61300-2-11:1995); German version EN 61300-2-11:1997 |
| DIN EN 61518-2002 | 差動壓力測量?jī)x器和壓強可達413巴(41,3 MPa)帶凸緣的關閉裝置之間的配合尺寸 (IEC 61518:2001); 德文版本 E | Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa) (IEC 61518:2001); German version EN 61518:2001 + Corrigendum:2002 |
| DIN EN 61846-1999 | 超聲波.壓力脈沖碎石器.電磁場特性 | Ultrasonics - Pressure pulse lithotripters - Characteristics of fields (IEC 61846:1998); German version EN 61846:1998 |
| DIN EN 676-2003 | 氣體燃料用自動壓力通風燃燒器 | Automatic forced draught burners for gaseous fuels; German version EN 676:2003 |
| DIN EN 692-2006 | 機床.機械壓力.安全性.德文版本 EN 692-2005 | Machine tools - Mechanical presses - Safety; German version EN 692:2005 |
| DIN EN 712-1994 | 熱塑塑料管道系統.壓力管和管接頭之間承載端部的機械連接.恒定縱向作用力下抗拉出力的試驗方法 | Thermoplastics piping systems; end-load bearing mechanical joints between pressure pipes and fittings; test method for resistance to pull-out under constant longitudinal force; German version EN 712:1993 |
| DIN EN 713-1994 | 塑料管道系統.管接頭和聚烯烴壓力管間的機械連接.在內壓和彎曲下密封性的試驗方法 | Plastics piping systems; mechanical joints between fittings and polyolefin pressure pipes; test method for leaktightness under internal pressure of assemblies subjected to bending; German version EN 713:1993 |
| DIN EN 714-1994 | 熱塑管道系統.壓力管道和模壓管件之間無末端承載的橡膠密封圈連接件.無端部拉力的流體靜力內壓力下的密封性 | Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings - Test method for leaktightness under internal hydrostatic pressure whithout end thrust; German version EN 714:1994 |
| DIN EN 715-1994 | 熱塑塑料管道系統.小直徑壓力管和管接頭之間承載端部的連接.在水內壓力下（包括端頭推力）密封試驗方法 | Thermoplastics piping systems; end-load bearing joints between small diameter pressure pipes and fittings; test method for leaktightness under internal water pressure, including end thrust; German version EN 715:1994 |
| DIN EN 764-1-2004 | 壓力設備.第1部分:術語.壓力、溫度、容積和標稱尺寸 | Pressure equipment - Part 1: Terminology - Pressure, temperature, volume, nominal size; German version EN 764-1:2004 |
| DIN EN 764-2-2002 | 壓力設備.第2部分:數量、符號和單位; 德文版本 EN 764-2:2002 | Pressure equipment - Part 2: Quantities, symbols and units; German version EN 764-2:2002 |
| DIN EN 764-3-2002 | 壓力設備.第3部分:有關各方的定義; 德文版本 EN 764-3:2002 | Pressure equipment - Part 3: Definition of parties involved; German version EN 764-3:2002 |
| DIN EN 764-4-2003 | 壓力設備.金屬材料交貨技術條件的規定 | Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials; German version EN 764-4:2002 |
| DIN EN 764-5-2003 | 壓力設備.第5部分:金屬材料檢驗文件及材料規范 | Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification; German version EN 764-5:2002 |
| DIN EN 764-7 Berichtigung 1-2006 | 壓力設備.不用火加熱的壓力容器的安全性系統 | Pressure equipment - Part 7:Safety systems for unfired pressure vessels; German version EN 764-7:2002, Corrigenda to DIN EN 764-7:2002-09; German version EN 764-7:2002/AC:2006 |
| DIN EN 764-7-2002 | 壓力設備.第7部分:不用火加熱的壓力設備用安全系統; 德文版本 EN 764-7:2002 | Pressure equipment - Part 7: Safety systems for unfired pressure equipment; German version EN 764-7:2002 |
| DIN EN 802-1994 | 塑料管道和管道輸送系統.壓力管道系統用噴鑄熱塑管件.壓碎造成最大變形的試驗方法; 德文版本 EN 802:1994 | Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing; German version EN 802:1994 |
| DIN EN 803-1994 | 塑料管道系統.壓力管道用橡膠密封圈連接件的熱塑噴鑄管件.無端部拉力的抗瞬時內壓的試驗方法; 德文版本 EN | Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust; German version EN 803:1994 |
| DIN EN 804-1994 | 塑料管道系統.壓力管道用帶膠粘套管連接件的熱塑噴鑄管件.抗流體靜力瞬時內壓能力的試驗方法; 德文版本 EN | Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure; German version EN 804:1994 |
| DIN EN 837-3-1997 | 壓力計.第3部分:膜片和膜盒式壓力計.尺寸、測量技、要求和試驗 | Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-3:1996 |
| DIN EN 869-2007 | 機械安全.金屬壓力鑄造設備安全要求 | Safety of machinery - Safety requirements for pressure metal diecasting units; English version of DIN EN 869:2007-02 |
| DIN EN 88-1996 | 輸入壓力不超過200mbar的煤氣設備調壓器 | Pressure governors for gas appliances for inlet pressures up to 200 mbar; German version EN 88:1991 + A1:1996 |
| DIN EN 911-1995 | 塑料管道系統.熱塑塑料壓力管道用的彈性密封環型接頭和機械接頭的連接.外部靜力液壓條件下的防漏試驗方法; | Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure; German version EN 911:1995 |
| DIN EN 976-1-1997 | 玻璃鋼制地下槽罐(GRP).石油基液化燃料無壓力存儲用臥式圓桶罐.第1部分:單壁罐的要求和試驗方法 | Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks; German version EN 976-1:1997 |
| DIN EN 976-2-1997 | 玻璃鋼制地下槽罐(GRP).石油基液化燃料無壓力存儲用臥式圓桶罐.第2部分:運輸,搬運,中間存儲,單壁罐的安裝 | Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non pressure storage of liquid petroleum based fuels - Part 2: Transport, handling, storage and installation of single wall tanks; German version EN 976-2:1997 |
| DIN EN ISO 10079-3-2000 | 醫用吸引設備.第3部分:真空或用壓力驅動的吸引設備 | Medical suction equipment - Part 3: Suction equipment powered from a vacuum or pressure source (ISO 10079-3:1999); German version EN ISO 10079-3:1999 |
| DIN EN ISO 10426-4-2005 | 石油和天然氣工業.油井固井用水泥和材料.第4部分:在大氣壓力下泡沫水泥漿的制備和檢驗 | Petroleum and natural gas industries - Cements and materials for well cementing - Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure (ISO 10426-4:2004); English version EN ISO 10426-4:2004 |
| DIN EN ISO 10426-5-2006 | 石油和天然氣工業.油井固井用水泥和材料.第5部分:在大氣壓力下固井水泥加工制劑的收縮和膨脹的測定(ISO 104 | Petroleum and natural gas industries - Cements and materials for well cementing - Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure (ISO 10426-5:2004); English version EN ISO 10426-5:2005 |
| DIN EN ISO 10524-1-2006 | 醫用氣體設備用的壓力調節器.第1部分:壓力調節器和帶流量計設備的壓力調節器(ISO 10524-1-2006) | Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2006); English version of DIN EN ISO 10524-1:2006-05 |
| DIN EN ISO 10524-2-2006 | 醫用氣體用壓力調節器.第2部分:進氣壓力調節器和線性壓力調節器(ISO 10524-2:2005) | Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2005); English version of DIN EN ISO 10524-2:2006-07 |
| DIN EN ISO 10524-3-2006 | 醫療氣體用壓力調節器.第3部分:帶氣缸閥的壓力調節器(ISO 10524-3:2005) | Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (ISO 10524-3:2005); English version of DIN EN ISO 10524-3:2006-07 |
| DIN EN ISO 1167-1-2006 | 流體傳輸用熱塑管、接頭和組件.抗內壓力的測定.第1部分:通用方法 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006); English version of DIN EN ISO 1167-1:2006-05 |
| DIN EN ISO 1167-2-2006 | 流體傳輸用熱塑管、接頭和組件.抗內壓力的測定.第2部分:管試件的準備 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006); English version of DIN EN ISO 1167-2:2006-05 |
| DIN EN ISO 12162-1996 | 壓力管道用熱塑性材料.分類.材料牌號和計算 | Classification of thermoplastic materials in pipe form based on the resistance against internal hydrostatic pressure - Material designation and calculations (ISO 12162:1995); German version EN ISO 12162:1995 |
| DIN EN ISO 13760-1998 | 壓力下液體輸送用塑料管.Miner法則.累積損壞的計算方法 | Plastics pipes for the conveyance of fluids under pressure - Miner's rule - Calculation method for cumulative damage (ISO 13760:1998); German version EN ISO 13760:1998 |
| DIN EN ISO 13783-1998 | 塑料管體系.未增塑聚氯乙烯(PVC-U)端部承載雙套管連接件.在經受彎曲和內壓力時檢測密封性和機械強度的試驗 | Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997); German version EN ISO 13783:1997 |
| DIN EN ISO 14113-1997 | 氣焊設備.最大設計壓力不超過450巴液化氣橡膠及塑料軟管組件 | Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar (ISO 14113:1997); German version EN ISO 14113:1997 |
| DIN EN ISO 15265-2004 | 熱環境的人類工效學.熱工作環境中防止壓力和不適的風險評估策略 | Ergonomics of the thermal environment - Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions (ISO 15265:2004); German version EN ISO 15265:2004 |
| DIN EN ISO 15364-2002 | 船舶和航海技術.油輪用壓力/真空閥 (ISO 15364:2000); 德文版本 EN ISO 15364:2001 | Ships and marine technology - Pressure/vacuum valves for cargo tanks (ISO 15364:2000); German version EN ISO 15364:2001 |
| DIN EN ISO 15616-3-2003 | 高質量焊接和切割用CO2激光機驗收試驗.第3部分:氣體流量和壓力測量?jī)x校正 | Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003); German version EN ISO 15616-3:2003 |
| DIN EN ISO 15996-2005 | 氣瓶.殘余壓力閥門.一般要求和型式試驗 | Gas cylinders - Residual pressure valves - General requirements and type testing (ISO 15996:2005); German version EN ISO 15996:2005 |
| DIN EN ISO 17654-2003 | 金屬材料焊縫破壞檢驗.電阻焊.電阻縫焊壓力試驗 | Destructive tests on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds (ISO 17654:2003); German version EN ISO 17654:2003 |
| DIN EN ISO 20623-2004 | 石油和相關產品.液體的極限壓力和抗磨性能的測定.四球法 | Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of fluids - Four ball method (European conditions) (ISO 20623:2003); German version EN ISO 20623:2003 |
| DIN EN ISO 22088-4-2006 | 塑料.耐環境應力碎裂的測定(ESC).第4部分:球或釘壓力法(ISO 22088-4:2006) | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006); English version of DIN EN ISO 22088-4:2006-11 |
| DIN EN ISO 22435-2007 | 儲氣瓶.帶整體壓力調節器的氣缸閥.規范和類型測試 | Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2007); German version EN ISO 22435:2007 |
| DIN EN ISO 23251-2007 | 石油、石化和天然氣工業.壓力釋放和降壓系統 | Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems (ISO 23251:2006); English version EN ISO 23251:2007 |
| DIN EN ISO 2503-1998 | 氣焊設備.300巴以下的焊接、切割和相關工藝中使用的氣體瓶的壓力調節器 | Gas welding equipment - Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar (ISO 2503:1998); German version EN ISO 2503:1998 |
| DIN EN ISO 2556-2001 | 塑料.大氣壓力下薄膜和薄板的透氣率的測定.測壓法 | Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method (ISO 2556:1974); German version EN ISO 2556:2000 |
| DIN EN ISO 2811-4-2002 | 涂料和清漆.密度的測定.第4部分:壓力杯法(ISO 2811-4:1997); 德文版本 EN ISO 2811-4:2001 | Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:1997); German version EN ISO 2811-4:2001 |
| DIN EN ISO 3993-1995 | 液化石油氣和輕質烴類.密度或相對密度的測定.壓力液體比重測定法 (ISO 3993:1984); 德文版本 EN ISO 3993:1 | Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method (ISO 3993:1984); German version EN ISO 3993:1995 |
| DIN EN ISO 4256-1999 | 液化石油氣.蒸汽壓力測定.液化石油氣法 | Liquefied petroleum gases - Determination of gauge vapour pressure - LPG method (ISO 4256:1996); German version EN ISO 4256:1998 |
| DIN EN ISO 4622-1994 | 顏料和清漆.堆積壓力試驗 (ISO 4622:1992); 德文版本 EN ISO 4622:1994 | Paints and varnishes - Pressure test for stackability (ISO 4622:1992); German version EN ISO 4622:1994 |
| DIN EN ISO 6520-2-2002 | 焊接及相關工藝.金屬材料中幾何缺陷的分類.第2部分:壓力焊(ISO 6520-2:2001); 德文版本 EN ISO 6520-2:2001 | Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure (ISO 6520-2:2001); German version EN ISO 6520-2:2001 |
| DIN EN ISO 6803-1997 | 橡膠和塑料軟管及軟管組件.無彎曲液壓壓力脈沖試驗 | Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:1994); German version EN ISO 6803:1997 |
| DIN EN ISO 7458-2004 | 玻璃容器.耐內部壓力性.試驗方法 | Glass containers - Internal pressure resistance - Test methods (ISO 7458:2004); German version EN ISO 7458:2004 |
| DIN EN ISO 7751-1997 | 橡膠和塑料軟管及軟管組件.試驗壓力和爆破壓力與設計工作壓力的比值 (ISO 7751:1991); 德文版本 EN ISO 775 | Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure (ISO 7751:1991); German version EN ISO 7751:1997 |
| DIN EN ISO 8536-10-2005 | 醫用輸液器具.第10部分:與壓力輸液儀一起使用的輸液管的附件 | Infusion equipment for medical use - Part 10: Accessories for fluid lines for use with pressure infusion equipment (ISO 8536-10:2004); German version EN ISO 8536-10:2004 |
| DIN EN ISO 8536-11-2005 | 醫用輸液器具.第11部分:與壓力輸液儀一起使用的輸液過濾器 | Infusion equipment for medical use - Part 11: Infusion filters for use with pressure infusion equipment (ISO 8536-11:2004); German version EN ISO 8536-11:2004 |
| DIN EN ISO 8536-8-2005 | 醫用輸液器具.第8部分:有壓力輸液儀的輸液器具 | Infusion equipment for medical use - Part 8: Infusion equipment for use with pressure infusion apparatus (ISO 8536-8:2004); German version EN ISO 8536-8:2004 |
| DIN EN ISO 8536-9-2005 | 醫用輸液器具.第9部分:與壓力輸液儀一起使用的輸液管 | Infusion equipment for medical use - Part 9: Fluid lines for use with pressure infusion equipment (ISO 8536-9:2004); German version EN ISO 8536-9:2004 |
| DIN EN ISO 8973-2000 | 液化石油氣.密度和蒸氣壓力的計算 | Liquefied petroleum gases - Calculation for density and vapour pressure (ISO 8973:1997); German version EN ISO 8973:1999 |
| DIN EN ISO 9311-3-2005 | 熱塑性管道系統用膠粘劑.第3部分:耐內壓力性測定的試驗方法 | Adhesives for thermoplastic piping systems - Part 3: Test method for the determination of resistance to internal pressure (ISO 9311-3:2005); German version EN ISO 9311-3:2005 |
| DIN EN ISO 9863-1-2005 | 土工合成織物.特定壓力下厚度的測定.第1部分:單層 | Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers (ISO 9863-1:2005); German version EN ISO 9863-1:2005 |
| DIN EN ISO 9863-2-1996 | 土工織物和相關產品.規定壓力下的厚度測定.第2部分:多層制品的單層厚度測定方法 | Geotextiles and geotextile-related products - Determination of thickness at specified pressures - Part 2: Procedure for determination of thickness of single layers of multilayer products (ISO 9863-2:1996); German version EN ISO 9863-2:1996 |
| DIN ISO 10069-2-2000 | 壓力工具.彈性體壓縮彈簧.第2部分:附件規范 | Tools for pressing - Elastomer pressure springs - Part 2: Specification of accessories (ISO 10069-2:1991) |
| DIN ISO 10242-1-2000 | 壓力工具.沖頭柄.第1部分:A型 | Tools for pressing - Punch holder shanks - Part 1: Type A (ISO 10242-1:1998) |
| DIN ISO 10242-2-2000 | 壓力工具.沖頭柄.第2部分:C型 | Tools for pressing - Punch holder shanks - Part 2: Type C (ISO 10242-2:1991) |
| DIN ISO 10243-1993 | 沖壓工具.矩形截面的壓力彈簧.安裝座的尺寸和顏色代碼 | Tools for pressing; compression springs with rectangular section; housing dimensions and colour coding; identical with ISO 10243:1991 |
| DIN ISO 10763-2004 | 液壓傳動.端面平齊的無縫和焊接型精密鋼管.尺寸和標稱工作壓力 | Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures (ISO 10763:1994) |
| DIN ISO 11-1997 | 飛機.壓力座艙地面壓力試驗連接裝置 | Aircraft - Ground pressure testing connections for pressure cabins (ISO 11:1987) |
| DIN ISO 15171-1-2004 | 流體傳動和一般用途管接頭.診斷用液壓管接頭.第1部分:非壓力下連接的管接頭 | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure (ISO 15171-1:1999) |
| DIN ISO 15171-2-2004 | 流體傳動和一般用途管接頭.診斷用液壓管接頭.第2部分:帶M12 2螺紋端的壓力連接接頭 | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Couplings with M 16 × 2 end for connection under pressure (ISO 15171-2:2000) |
| DIN ISO 2162-2-1994 | 技術產品文獻.彈簧.第2部分:圓柱形螺旋壓力彈簧的說明 | Technical product documentation - Springs - Part 2: Presentation of data for cylindrical helical compression springs; identical with ISO 2162-2:1993 |
| DIN ISO 3322-2001 | 液壓系統和元件.作動筒.公稱壓力 | Fluid power systems and components - Cylinders - Nominal pressures (ISO 3322:1985) |
| DIN ISO 3583-1987 | 道路車輛.壓縮空氣氣動制動設備的壓力試驗連接.與ISO 3583, 1984版相同 | Road vehicles; pressure test connection for compressed-air pneumatic braking equipment; identical with ISO 3583, edition 1984 |
| DIN ISO 45-1983 | 航空和航天.壓力加油連接裝置 | Aircraft; pressure refuelling connections |
| DIN ISO 4548-6-1990 | 內燃機.滿流式機油濾清器的試驗方法.靜態爆破壓力試驗 | Internal combustion engines; methods of test for full-flow lubricating oil filters; static burst pressure test; identical with ISO 4548-6:19855 |
| DIN ISO 5682-3-1999 | 農用機械和拖拉機.農作物保護設備.第3部分:壓力調節系統的測試方法 | Agricultural machinery and tractors - Equipment for crop protection - Part 3: Test methods for pressure-adjustment systems (ISO 5682-3:1997) |
| DIN ISO 6162-1-2006 | 液壓傳動.帶分離式或一體式法蘭夾和米制或英制螺紋的凸緣連接器.第1部分:壓力為3.5MPa至35MPa(35巴至350巴) | Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 (ISO 6162-1:2002 + Cor. 1:2004) |
| DIN ISO 6162-2-2006 | 液壓傳動.帶分離式或一體式法蘭夾和米制或英制螺紋的凸緣連接器.第2部分:壓力為35MPa至40MPa(350巴至400巴) | Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 2: Flange connectors for use at pressures of 35 MPa (350) to 40 MPa (400 bar), DN 13 to DN 51 (ISO 6162-2:2002) |
| DIN ISO 6771-1984 | 航空航天.航空航天結構.流體系統和部件.壓力和溫度 | Aerospace; aerospace construction; fluid systems and components; pressure and temperature |
| DIN ISO 9022-5-1999 | 光學和光學儀器.環境試驗方法.第5部分:低溫度低壓力組合試驗 | Optics and optical instruments - Environmental test methods - Part 5: Combined cold, low air pressure (ISO 9022-5:1994) |
| DIN ISO 9457-2-1997 | 道路車輛.米制起動器電動機小齒輪.第2部分:20度壓力角小齒輪 | Road vehicles - Metric starter motor pinions - Part 2: Pinions with 20° pressure angle (ISO 9457-2:1994) |
| DIN ISO 9939-1995 | 航空航天. 壓力加油連接器(新型號) (ISO 9939:1994) | Aerospace - Pressure re-oiling connection (new type) (ISO 9939:1994) |
| DIN V 14430-2004 | 消防.正壓力泡沫系統和壓縮氣體泡沫系統 | Fire fighting - Positive pressure foam systems and compressed air foam systems |
| DIN V ENV 12108-2001 | 塑料管道系統.建筑物內人用冷熱水壓力管道安裝指南 | Plastics piping systems - Guidance for the installation inside buildings of pressure piping systems for hot and cold water intended for human consumption; German version ENV 12108:2001 |
| DIN V ENV 1401-2-2000 | 非壓力地下排水和污水管道用塑料管道系統.硬聚氯乙烯(PVC-U).第2部分:一致性評估指南 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for assessment of conformity; German version ENV 1401-2:2000 |
| DIN V ENV 1852-2-2000 | 非壓力地下排水和污水用塑料管道系統.聚丙烯.第2部分:一致性評估指南 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity; German version ENV 1852-2:2000 |
| 編號 | 中文名稱 | 英文名稱 |