| 編號 | 中文名稱 | 英文名稱 |
|---|
| ANSI B74.16-2002
| 金剛石磨粒粒徑的檢驗
| Checking the Size of Diamond Abrasive Grain
|
| ANSI B74.20-2004
| 亞篩粒度中金剛石粉末的分級
| Grading of Diamond Powder in Sub-Sieve Sizes
|
| ANSI B74.3-2003
| 金剛石或CBN磨料制品形狀和尺寸的規范
| Specifications for Shapes and Sizes of Diamond or CBN Abrasive Products
|
| ANSI/UL 745-2-31-2006
| 金剛石芯鉆頭的安全標準.特殊要求
| Standard for Safety for Particular Requirements for Diamond Core Drills
|
| ASTM G 171-2003
| 用金剛石觸針測定材料劃痕硬度的標準試驗方法
| Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
|
| BS 4019-5-1999
| 旋轉鉆芯設備.旋轉鉆心設備.鋼繩金剛石鉆孔設備規范.A系統:米制單位
| Rotary core drilling equipment - Rotary core drilling equipment - Specification for wireline diamond drilling equipment - System A. Metric units
|
| BS EN ISO 6360-4-2004
| 牙科學.旋轉儀器的數字編碼系統.金剛石儀器的具體特性
| Dentistry - Number coding system for rotary instruments - Specific characteristics of diamond instruments
|
| BS EN ISO 7711-2-1993
| 牙科用旋轉器械.金剛石器械.第2部分:切盤
| Dental rotary instruments - Diamond instruments - Discs
|
| BS EN ISO 7711-3-2005
| 牙科學.金剛石旋轉器械.磨粒尺寸、標注與彩色編碼
| Dentistry - Diamond rotary instruments - Grit sizes, designation and colour code
|
| BS ISO 16463-2004
| 多晶金剛石鑲?cè)胁寮?尺寸、類型
| Polycrystalline diamond inserts, tipped - Dimensions, types
|
| BS ISO 22917-2005
| 超磨料.金剛石或立方氮化硼砂輪的極限偏差和跳動誤差
| Superabrasives - Limit deviations and run out tolerances for grinding wheels with diamond or cubic boron nitride
|
| BS ISO 6104-2005
| 高強度磨料制品.金剛石或立方氮化硼旋轉磨削工具.一般評述、名稱和多種語言術語
| Superabrasive products - Rotating grinding tools with diamond or cubic boron nitride - General survey, designation and multilingual nomenclature
|
| DD 234-1996
| 拋光金剛石的分級.術語和分類
| Grading polished diamonds. Terminology and classification
|
| DIN 4000-134-2005
| 性能表.第134部分:含金剛石和氮化硼的不可旋轉制品
| Tabular layouts of properties - Part 134: Non rotating products with diamond or boron nitride
|
| DIN 58723-1985
| 光學加工.平圓面用嵌制金剛石鉆頭的磨具
| Production in optic of engineering; diamond impregnated tools for facetts
|
| DIN 58741 Bb.1-2006
| 光學工程生產.鑲金剛石的碗形砂輪.綜述
| Production in optical engineering - Diamond impregnated cup wheels - Survey
|
| DIN 58741-1-1996
| 光學加工.鑲金剛石的碗形砂輪.第1部分:帶圓錐體
| Production in optical engineering - Diamond impregnated cup wheels - Part 1: with steep cone
|
| DIN 58741-2-2004
| 光學加工.鑲金剛石的杯形砂輪.第2部分:帶安裝缸砂輪
| Production in optical engineering - Diamond impregnated cup wheels - Part 2: With mounting cylinder
|
| DIN 58741-4-2004
| 光學加工.鑲金剛石的杯形砂輪.第4部分:組合工具
| Production in optical engineering - Diamond impregnated cup wheels - Part 4: Combinated tools
|
| DIN 58741-5-2004
| 光學加工.鑲金剛石的杯形砂輪.第5部分:電鍍的
| Production in optical engineering - Diamond impregnated cup wheels - Part 5: Electroplated
|
| DIN 58741-6-2007
| 光學加工.鑲金剛石的杯形砂輪.第6部分:整套砂輪磨削工具
| Production in optical engineering - Diamond impregnated cup wheels - Part 6: Set-wheels grinding tools
|
| DIN 58741-7-2005
| 光學加工.鑲金剛石的杯形砂輪.第7部分:可組合的定形研磨盤
| Production in optical engineering - Diamond impregnated cup wheels - Part 7: Combinable shape grinding discs
|
| DIN 58741-8-2005
| 光學加工.鑲金剛石的杯形砂輪.第8部分:中空錐柄連接
| Production in optical engineering - Diamond impregnated cup wheels - Part 8: With hollow taper shank connection
|
| DIN 58743-2005
| 光學加工.鑲金剛石的切割鋸片
| Production in optical engineering - Diamond impregnated discs
|
| DIN 58744-1-2002
| 光學工程生產.鑲金剛石的磁芯鉆.第1部分:帶裝配螺紋
| Production in optical engineering - Diamond impregnated core drills - Part 1: With fitting thread
|
| DIN 58744-2-1998
| 光學工程生產.鑲金剛石的空心鉆.第2部分:帶裝配圓筒
| Production in optical engineering - Diamond impregnated core drills - Part 2: With fitting cylinder
|
| DIN 58745-1977
| 光學加工.鑲金剛石的片狀器材
| Production in optical engineering; diamond impregnated pellets
|
| DIN 69110-2005
| 光學加工.光學工具用金剛石鑲嵌.超磨蝕部分的元件
| Production in optical engineering - Diamond impregnation for tools used in optics - Details about the superabrasive section
|
| DIN EN ISO 6360-4-2004
| 牙科學.旋轉器械的數字編碼體系.第4部分:金剛石器械的特性
| Dentistry - Number coding system for rotary instruments - Part 4: Specific characteristics of diamond instruments (ISO 6360-4:2004); German version EN ISO 6360-4:2004
|
| DIN ISO 16463-2005
| 鑲片多晶體金剛石鑲齒.尺寸、類型
| Polycrystalline diamond inserts, tipped - Dimensions, types (ISO 16463:2004)
|
| DIN ISO 22917-2005
| 超磨料.金剛石或立方體氮化硼砂輪的極限偏差和跳動誤差
| Superabrasives - Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride (ISO 22917:2004)
|
| DIN ISO 6104-2005
| 超磨料制品.帶金剛石或立方氮化硼的旋轉磨削工具.一般評述、名稱與符號和多種語言術語
| Superabrasive products - Rotating grinding tools with diamond or cubic boron nitride - General survey, designation and multilingual nomenclature (ISO 6104:2005)
|
| DIN-Fachbericht ISO/TR 24857-2007
| 人造工業金剛石砂粒產品.單一顆粒抗壓故障強度."DiaTest-SI"系統
| Synthetic industrial diamond grit products - Single-particle compressive failure strength - "DiaTest-SI" system
|
| GB 13960.7-1997
| 可移式電動工具的安全第二部分:帶水源金剛石鉆的專用要求
| Safety of transportable motor-operated electric tools--Part 2:Particular requirements for diamond drills with water supply
|
| GB 13960.8-1997
| 可移式電動工具的安全第二部分:帶水源金剛石鋸的專用要求
| Safety of transportable motor-operated electric tools--Part 2:Particular requirements for diamond saws with water supply
|
| GB/T 11270.1-2002
| 超硬磨料制品金剛石圓鋸片第1部分:焊接鋸片
| Abrasive products--Diamond circular saw blade--Part 1:Welded saw blades
|
| GB/T 11270.2-2002
| 超硬磨料制品金剛石圓鋸片第2部分:燒結鋸片
| Abrasive products--Diamond circular saw blade--Part 2:Sintered saw blades
|
| GB/T 14898-2004
| 人造金剛石用石墨
| Graphite for making synthetic diamond
|
| GB/T 16950-1997
| 金剛石巖心鉆探鉆具設備
| Diamond core drilling equipment conventional system
|
| GB/T 16951-1997
| 金剛石繩索取心鉆探鉆具設備
| Diamond core drilling equipment--Wire line system
|
| GB/T 21952-2008
| 鑲聚晶金剛石刀片 尺寸
| Polycrystalline diamond inserts,tipped - Dimensions |
| GB/T 6405-1994
| 人造金剛石和立方氮化硼品種
| Types of synthetic diamond and cubic boron nitride
|
| GB/T 6406-1996
| 超硬磨料金剛石或立方氮化硼顆粒尺寸
| Super abrasive--Grain sizes of diamond or cubic boron nitride
|
| GB/T 6409.2-1996
| 超硬磨料制品金剛石或立方氮化硼磨具形狀和尺寸
| Abrasive products--Diamond or cubic boron nitride grinding tools--Form and dimensions
|
| IEC 61029-2-6-1993
| 移動式電動工具的安全 第2-6部分:注水金剛石鉆的特殊要求
| Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond drills with water supply
|
| IEC 61029-2-7-1993
| 移動式電動工具的安全 第2-7部分:注水金剛石鋸的特殊要求
| Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond saws with water supply
|
| ISO 10097-1-1999
| 金剛石繩索取心鉆探設備 系列A 第1部分:米制單位
| Wireline diamond core drilling equipment - System A - Part 1: Metric units
|
| ISO 10097-2-1999
| 金剛石繩索取心鉆探設備 系列A 第2部分:英制單位
| Wireline diamond core drilling equipment - System A - Part 2: Inch units
|
| ISO 10098-1992
| 金剛石繩索取心鉆探設備 CSSK體系
| Wireline diamond core drilling equipment; system CSSK
|
| ISO 16463-2004
| 鑲片多晶體金剛石鑲齒.尺寸、類型
| Polycristalline diamond inserts, tipped - Dimensions, types
|
| ISO 22917-2004
| 超磨料.金剛石或立方體氮化硼砂輪的極限偏差和跳動誤差
| Superabrasives - Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride
|
| ISO 3396-1975
| 旋轉鉆井設備.金剛石鉆頭和巖心金剛石鉆頭
| Rotary drilling equipment; Diamond drilling bits and diamond core bits
|
| ISO 3551-1-1992
| 回轉取心金剛石鉆探設備 系列A 第1部分:米制單位
| Rotary core diamond drilling equipment; system A; part 1: metric units
|
| ISO 3551-2-1992
| 回轉取心金剛石鉆探設備 系列A 第2部分:英制單位
| Rotary core diamond drilling equipment; system A; part 2: inch units
|
| ISO 3552-1-1992
| 回轉取心金剛石鉆探設備 系列B 第1部分:米制單位
| Rotary core diamond drilling equipment; system B; part 1: metric units
|
| ISO 3552-2-1992
| 回轉取心金剛石鉆探設備 系列B 第2部分:英制單位
| Rotary core diamond drilling equipment; system B; part 2: inch units
|
| ISO 6104-2005
| 超磨料制品.帶金剛石或立方氮化硼的旋轉磨削工具.一般評述、名稱與符號和多種語言術語
| Superabrasive products - Rotating grinding tools with diamond or cubic boron nitride - General survey, designation and multilingual nomenclature
|
| ISO 6360-4-2004
| 牙科學.旋轉器械的數字編碼體系.第4部分:金剛石器械的具體特性
| Dentistry - Number coding system for rotary instruments - Part 4: Specific characteristics of diamond instruments
|
| ISO 8866 Technical Corrigendum 1-1991
| 回轉取心金剛石鉆探設備 系列C 技術勘誤1
| Rotary core diamond drilling equipment; system C; technical corrigendum 1
|
| ISO 8866 Technical Corrigendum 2-1992
| 回轉取心金剛石鉆探設備 系列C 技術勘誤2
| Rotary core diamond drilling equipment; system C; technical corrigendum 2
|
| ISO 8866-1991
| 回轉取心金剛石鉆探設備 系列C
| Rotary core diamond drilling equipment; system C
|
| ISO/TR 24857-2006
| 人造工業金剛石砂粒產品.單一顆粒抗壓故障強度."DiaTest-SI"系統
| Synthetic industrial diamond grit products - Single-particle compressive failure strength - "DiaTest-SI" system
|
| JB/T 10040-2001
| 金剛石修整滾輪
| ()
|
| JB/T 10041-2008
| 超硬材料 金剛石或立方氮化硼/硬質合金復合片品種、尺寸
| ()
|
| JB/T 10646-2006
| 超硬磨料 金剛石熱沖擊韌性測定方法
| Super abrasive - Determination of thermal impact toughness of diamond
|
| JB/T 10719-2007
| 焊接聚晶金剛石或立方氮化硼槽刀
| ()
|
| JB/T 10720-2007
| 焊接聚晶金剛石或立方氮化硼車刀
| ()
|
| JB/T 10721-2007
| 焊接聚晶金剛石或立方氮化硼鉸刀
| ()
|
| JB/T 10722-2007
| 焊接聚晶金剛石或立方氮化硼立銑刀
| ()
|
| JB/T 10723-2007
| 焊接聚晶金剛石或立方氮化硼鏜刀
| ()
|
| JB/T 10724-2007
| 金剛石或立方氮化硼珩磨條 技術要求
| ()
|
| JB/T 10725-2007
| 天然金剛石車刀
| ()
|
| JB/T 3233-1999
| 鉆探用人造金剛石燒結體
| ()
|
| JB/T 3234-1999
| 拉絲模用人造金剛石燒結體
| ()
|
| JB/T 3235-1999
| 人造金剛石燒結體磨耗比測定方法
| ()
|
| JB/T 3236-2007
| 金剛石修整筆
| Diamond truing pen
|
| JB/T 3296-1992
| 金剛石磨邊砂輪
| ()
|
| JB/T 3583-2006
| 超硬磨料制品 金剛石精磨片
| Superabrasive products-Diamond finshing pellets
|
| JB/T 3943.2-1999
| 金剛石拉絲模
| ()
|
| JB/T 5205-2007
| 石材加工用金剛石磨具
| Diamond abrasive products for stone processing
|
| JB/T 5823-1991
| 聚晶金剛石拉絲模具 技術條件
| ()
|
| JB/T 6084-2007
| 鉆探工具用三角形金剛石聚晶
| Triangle polycrystalline diamond for drilling tools
|
| JB/T 6571-1993
| 人造金剛石或立方氮化硼沖擊韌性測定方法
| ()
|
| JB/T 6998-1993
| 25MN金剛石液壓機
| ()
|
| JB/T 7989-1997
| 超硬磨料人造金剛石技術條件
| ()
|
| JB/T 7990-1998
| 超硬磨料 人造金剛石微粉和立方氮化硼微粉
| ()
|
| JB/T 8000-1999
| 金剛石框架鋸條
| ()
|
| JB/T 8002-1999
| 超硬磨料制品 人造金剛石或立方氮化硼研磨膏
| ()
|
| JB/T 8374-1996
| 金剛石選型機
| ()
|
| JB/T 8394-1996
| 粉末冶金天然金剛石修整片
| ()
|
| JB/T 9880-1999
| 金剛石修整滾輪 安裝軸徑
| ()
|
| JB/T 9991-1999
| 電鍍金剛石鉸刀
| ()
|
| JC/T 220-1979（1996）
| 天然金剛石
| ()
|
| JC/T 340-1992(1996)
| 加工非金屬硬脆材料用節塊式金剛石圓鋸片
| ()
|
| JC/T 470-1992(1996)
| 加工非金屬硬脆材料用節塊式金剛石框架鋸條
| ()
|
| JIS B4130-1998
| 金剛石/立方晶體氮化硼產品.金剛石或立方晶體氮化硼的粒度
| Diamond/CBN products -- Grain sizes of diamond or cubic boron nitride
|
| JIS B4131-1998
| 金剛石/立方晶體氮化硼產品.金剛石或立方晶體氮化硼砂輪
| Diamond/CBN products -- Diamond or CBN grinding wheels
|
| JIS B4134-1994
| 單刃金剛石砂輪修整工具
| Single point diamond dressing tools
|
| JIS B4138-1998
| 金剛石/立方晶體氮化硼產品.金剛石或立方晶體氮化硼分割鋸
| Diamond/CBN products -- Diamond or CBN segmented saws
|
| JIS B4140-2006
| 金剛石/CBN產品.金剛石或CBN電鍍工具
| Diamond/CBN products -- Diamond or CBN electroplated tools
|
| JIS B4141-1998
| 金剛石/立方晶體氮化硼產品.金剛石或立方晶粒氮化硼砂輪和鋸.形狀的尺寸特性和代碼
| Diamond/CBN products -- Diamond or CBN grinding wheels and saws -- Dimensional characteristics and code for the forms
|
| JIS B4142-2002
| 金剛石/CBN制品.安全性要求
| Diamond/CBN products -- Safety requirements
|
| JIS C9029-2-6-2006
| 移動式電動工具的安全.第2-6部分:帶供水的金剛石鉆的特殊要求
| Safety of transportable motor-operated electric tools -- Part 2-6: Particular requirements for diamond drills with water supply
|
| JIS C9029-2-7-2006
| 移動式電動工具的安全.第2-7部分:帶供水的金剛石鋸的特殊要求
| Safety of transportable motor-operated electric tools -- Part 2-7: Particular requirements for diamond saws with water supply
|
| JIS T5505-1-2001
| 牙科旋轉儀器.金剛石儀器.第1部分:尖端.尺寸、要求、標記和包裝
| Dental rotary instruments -- Diamond instruments -- Part 1: Points -- Dimensions, requirements, marking and packaging
|
| JIS T5505-2-2001
| 牙科旋轉儀器.金剛石儀器.第2部分:圓盤
| Dental rotary instruments -- Diamond instruments -- Part 2: Discs
|
| JIS T5505-3-2001
| 牙科旋轉儀器.金剛石儀器.第3部分:磨料粒度、牌號和色碼
| Dental rotary instruments -- Diamond instruments -- Part 3: Grit sizes, designation and colour code
|
| MT/T 785-1998
| 金剛石復合片取心鉆頭
| ()
|
| MT/T 786-1998
| 金剛石復合片不取心鉆頭
| ()
|
| MT/T 789-1998
| 煤田鉆探金剛石取心鉆頭
| ()
|
| MT/T 984-2006
| 煤礦用金剛石復合片錨桿鉆頭
| ()
|
| NF E75-301-1978
| 金剛石或氮化硼砂輪.扁砂輪.１Ａ１型
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. PLAIN WHEEL,FORM 1A1)
|
| NF E75-302-1978
| 金剛石或氮化硼砂輪.帶加固套筒的扁砂輪１４Ａ１型
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. PLAIN WHEEL REINFOR-CED,FORM 14A1.)
|
| NF E75-303-1978
| 金剛石或氮化硼砂輪.扁砂輪，１Ｌ１型
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. PLAIN WHEEL,FORM 1L1)
|
| NF E75-304-1978
| 金剛石或氮化硼砂輪.扁砂輪.１Ｅ６Ｑ和１Ｅ６Ｑ型
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. PLAIN WHEELS,FORMS 1E6Q AND 14E6Q.)
|
| NF E75-305-1978
| 金剛石或氮化硼砂輪.帶加固套筒的扁砂輪.１４ＥＥ１型
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. PLAIN WHEEL RENFORC-ED,FORM 14EE1.)
|
| NF E75-306-1978
| 金剛石或氮化硼砂輪.１ＦＦ１型扁砂輪
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. PLAIN WHEEL,FORM 1FF1.)
|
| NF E75-307-1978
| 金剛石或氮化硼砂輪.直式碗型砂輪，６ＡＺ型
| (DIAMOND OR CUBIC BORON NITRIDE GRINDIND WHEEL. STRAIGHT CUP WHEEL, FORM 6A2.)
|
| NF E75-308-1978
| 金剛石或氮化硼砂輪.１１Ａ２型錐式碗型砂輪
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. TAPERED CUP WHEEL, FORM 11A2.)
|
| NF E75-309-1978
| 金剛石或氮化硼砂輪.１２Ａ２型２０°碟形砂輪
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. 20 DEGREES DISHED WHEEL,FORM 12A2.)
|
| NF E75-310-1978
| 金剛石或氮化硼砂輪.１２Ａ２型４５°碟形砂輪
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. 45 DEGREES DISHED WHEEL,FORM 12A2.)
|
| NF E75-311-1978
| 金剛石或氮化硼砂輪.９Ａ３型雙凹口扁砂輪
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. PLAIN WHEEL WITH TWO BEVEL SHOULDERS,FORM 9A3.)
|
| NF E75-312-1978
| 金剛石或氮化硼砂輪.６Ａ９型碗型砂輪
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. STRAIGHT CUP WHEEL, FORM 6A9.)
|
| NF E75-313-1978
| 金剛石或氮化石砂輪.１１Ｖ９型錐式碗形砂輪
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. TAPERED CUP WHEEL, FORM 11V9.)
|
| NF E75-314-1978
| 金剛石或氮化硼砂輪.１２Ｖ９型錐式碗形砂輪
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. TAPERED CUP WHEEL, FORM 12V9.)
|
| NF E75-315-1978
| 金剛石或氮化硼砂輪.１ＥＥ１Ｖ型扁砂輪
| (DIAMOND OR CUBIC BORON NITRIDE GRINDIND WHEEL. PLAIN WHEEL,FORM 1EE1V.)
|
| NF E75-316-1978
| 金剛石或氮化硼砂輪.１Ｖ９型扁砂輪
| (DIAMOND OR CUBIC BORON NITRIDE GRINDING WHEEL. ALAIN WHEEL,FORM 1V9)
|
| NF S10-023-2000
| 未加工的光學玻璃.金剛石薄片的可磨性.試驗方法和分類
| (Raw optical glass - Grindability with diamond pellets - Test method and classification.)
|
| QB/T 2097.1-1995
| 金剛石玻璃刀
| ()
|
| QB/T 2097.2-1995
| 金剛石玻璃管割刀
| ()
|
| QB/T 2097.3-1995
| 金剛石圓鏡機
| ()
|
| UL 745-2-31-1995
| 金剛石巖芯鉆特殊要求
| (Particular requirements for diamond core drills )
|
| prEN 12866-1997
| 天然石料開采和加工機械和設備 金剛石線鋸安全要求
| Machines and plants for mining and tooling of natural stone - Safety requirements for diamond wire saws
|
| prEN 61029-2-6-1992
| 移動式電動工具的安全 第２－６部分：注水金剛石鉆的特殊要求
| Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond drills with water supply
|
| prEN 61029-2-7-1992
| 移動式電動工具的安全 第２－７部分：注水金剛石鋸的特殊要求
| Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond saws with water supply
|
| 編號 | 中文名稱 | 英文名稱 |
|---|