| 編號 | 中文名稱 | 英文名稱 |
|---|
| ANSI ATIS0300074-2006
| 安全管理系統的要求和指南
| Guidelines and Requirements for Security Management Systems
|
| ANSI B11.19-2003
| 被其他B11機床安全標準參考時安全保護的設計、制造、保養和操作的性能標準
| Performance Criteria for the Design, Construction, Care, and Operation of Safeguarding When Referenced by the Other B11 Machine Tool Safety Standards
|
| ANSI B28.1-2000
| 橡膠工業中磨床和砑光機的安全規范
| Safety Specifications for Mills and Calenders in the Rubber Industry
|
| ANSI B65.1-2005
| 圖象技術.安全標準.印刷機系統
| Graphic technology - Safety standard - Printing press systems
|
| ANSI B65.3-2001
| 安全標準.切紙機、平整機和整體加工設備
| Safety standard - Guillotine paper cutters, mill trimmers and integral handling equipment
|
| ANSI B65.4-2002
| 安全標準.包括旋轉的三刀切剪機和單-多刀切剪機
| Safety standard - Three-knife trimmers, including rotary, and single- and multiple-knife trimmers
|
| ANSI B65.5-2006
| 獨立操作的滾壓機安全標準
| Safety Standard - Stand-Alone Platen Presses
|
| ANSI B71.3-2005
| 室外動力設備.掃雪機.安全規范
| Outdoor Power Equipment - Snow Throwers - Safety Specifications
|
| ANSI C18.1M Part 2-2003
| 有水溶電解質的便攜式原電池和蓄電池組.安全標準
| Portable Primary Cells and Batteries with Aqueous Electrolyte - Safety Standard
|
| ANSI C18.2M Part 2-2007
| 便攜式可再充電電池.安全標準
| Portable Rechargeble Cells and Batteries - Safety Standard
|
| ANSI C18.3M Part 2-2004
| 便攜式鋰原電池和蓄電池.安全標準
| Portable Lithium Primary Cells and Batteries - Safety Standard
|
| ANSI C78.60432.1-2003
| 白熾燈.安全規范.第I部分:家用和類似一般照明用鎢絲燈
| Incandescent Lamps - Safety Specifications - Part I: Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes
|
| ANSI C78.60432.2-2004
| 電燈.白熾燈.安全規范.家用和類似一般照明用鎢鹵燈.第2部分
| Electric Lamps - Incandescent Lamps - Safety Specifications - Tungsten Halogen Lamps for Domestic and Similar General Lighting Purposes - Part 2
|
| ANSI MH24.1-2005
| 水平旋轉式物料搬運和相關設備的安全標準
| Safety Standard for Horizontal Carousel Material Handling and Associated Equipment
|
| ANSI N42.35-2006
| 國家安全防護用放射檢測門監視器的評價和性能
| Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland Security
|
| ANSI NAPIM177.2-2006
| 安全標準.印刷油墨豎柱混合器
| Safety standard - Printing ink vertical post mixers
|
| ANSI S2.60-1987
| 平衡機.外殼和其他安全措施
| Balancing machines - Enclosures and other safety measures
|
| ANSI X9.49-1998
| 金融業金融服務的安全防護遠程監測
| Secure Remote Access to Financial Services for the Financial Industry
|
| ANSI Z26.1-1996
| 公路行駛汽車的車窗和汽車設備用安全玻璃材料安全規程的美國國家標準
| American National Standard for Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways Safety Code
|
| ANSI/AIHA Z10-2005
| 職業衛生和安全管理系統
| Occupational Health and Safety Management Systems
|
| ANSI/ASAE S525-1.2-2003
| 農機駕駛室.環境空氣質量.定義、試驗方法和安全規程
| Agricultural Cabs - Environmental Air Quality - Definitions, Test Methods, and Safety Practices
|
| ANSI/ASHRAE 15-2001
| 機械制冷安全規程
| Safety Code for Mechanical Refrigeration
|
| ANSI/ASHRAE 15a-2007
| 制冷系統安全標準
| Safety Standard for Refrigeration Systems
|
| ANSI/ASHRAE 15b-2006
| 制冷系統安全標準
| Safety Standard for Refrigeration Systems
|
| ANSI/ASHRAE 15c-2007
| 制冷系統安全標準
| Safety Standard for Refrigeration Systems
|
| ANSI/ASME A18.1-2005
| 平臺式升降機和扶梯式升降椅的安全標準
| Safety Standard for Platform Lifts and Stairway Chairlifts
|
| ANSI/ASME A90.1-2003
| 帶式載人升降機的安全標準
| Safety Standard for Belt Manlifts
|
| ANSI/ASME B15.1-2000
| 機械動力傳動設備的安全標準
| Safety Standard for Mechanical Power Transmission Apparatus
|
| ANSI/ASME B19.1-1995
| 空氣壓縮機系統的安全標準
| Safety Standard for Air Compressor Systems
|
| ANSI/ASME B19.3-1991
| 加工工業用壓縮機的安全標準
| Safety Standard for Compressors for Process Industries
|
| ANSI/ASME B19.3a-1994
| 加工工業壓縮機安全標準
| Safety Standard for Compressors for Process Industries
|
| ANSI/ASME B19.3b-1995
| 加工工業壓縮機安全標準
| Safety Standard for Compressors for Process Industries
|
| ANSI/ASME B20.1-2006
| 輸送機及其相關設備的安全標準
| Safety Standard for Conveyors and Related Equipment
|
| ANSI/ASME B30.14-2004
| 側臂式拖拉機的安全標準
| Safety Standard for Side Boom Tractors
|
| ANSI/ASME B30.26-2004
| 索具五金件的安全標準
| Safety Standard for Rigging Hardware
|
| ANSI/ASME PVHO-1-2007
| 人占用的壓力容器的安全標準
| Safety Standard for Pressure Vessels for Human Occupancy
|
| ANSI/ASTM E1497-2005
| 可混合水的金屬加工流體使用安全規程
| Practice for Safe Use of Water-Miscible Metal Removal Fluids
|
| ANSI/ASTM F1250-2000
| 固定練習式自行車消費者安全規范
| Consumer Safety Specification for Stationary Exercise Bicycles
|
| ANSI/ASTM F1352-1991
| 固定的冰刀端部的性能和安全標準指南
| Guide for Fixed Blade Broadhead Performance and Safety Standards
|
| ANSI/ASTM F1446-2006
| 評定安全防護帽功能特性用設備和程序的測試方法
| Test Methods for Equipment, and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
|
| ANSI/ASTM F381-2006
| 消費者蹦床的部件、組裝、使用和標簽用安全規范
| Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
|
| ANSI/ASTM F400-2004
| 打火機用戶安全規范
| Consumer Safety Specification for Lighters (15.07)
|
| ANSI/ASTM F513-2000
| 曲棍球運動員面罩安全規范
| Safety Specification for Eye and Face Protective Equipment for Hockey Players
|
| ANSI/ASTM F963-2007
| 玩具安全的消費者安全規范
| Consumer Safety Specification on Toy Safety
|
| ANSI/AWS D16.1M/D 16-2004
| 機器人電弧焊接安全規范
| Specification for Robotic Arc Welding Safety
|
| ANSI/AWS F4.1-2007
| 容器和管道焊接和切割準備的推薦安全規程
| Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and Piping
|
| ANSI/EIA 636-1996
| 推薦的揚聲器安全規程
| Recommended Loudspeaker Safety Practices
|
| ANSI/ICC 2.0-1998
| 人造住宅建設和安全標準
| Manufactured Housing Construction and Safety Standards
|
| ANSI/IEC C78.1195-2001
| 雙管熒光燈.安全規范
| Double-Capped Fluorescent Lamps - Safety Specifications
|
| ANSI/IEC C78.1199-2001
| 單端熒光燈.安全規范
| Single-Capped Fluorescent Lamps - Safety Specifications
|
| ANSI/IEC C78.62035-2004
| 放電燈(不包括熒光燈).安全規范
| Discharge Lamps (excluding fluorescent lamps) - Safety Specifications
|
| ANSI/IEEE 338-2007
| 核電站安全系統周期監督測試標準
| Standard Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems
|
| ANSI/IEEE 352-1994
| 核電站安全系統可靠性分析一般原則指南
| Guide for General Principles of Reliability Analysis of Nuclear Power Generating Station Safety Systems
|
| ANSI/IEEE 379-2000
| 核電站安全系統中單一故障標準的應用
| Application of the Single-Failure Criterion to Nuclear Power Generating Station Safety Systems
|
| ANSI/IEEE 463-2006
| 電解電池線性工作區的電氣安全規程標準
| Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones
|
| ANSI/IEEE 577-2004
| 核電站安全系統的設計及運行中的可靠性分析要求
| Reliability Analysis in the Design and Operation of Safety Systems for Nuclear Power Generating Stations, Requirements for
|
| ANSI/IEEE 692-1997
| 核動力發電站安全系統的標準準則
| Standard Criteria for Security Systems for Nuclear Power Generating Stations
|
| ANSI/IEEE 7-4.3.2-2003
| 核電站安全系統中數字計算機標準
| Criteria for Digital Computers in Safety Systems of Nuclear Power Generating Stations
|
| ANSI/INCITS/ISO/IEC 10118-1-2000
| 信息技術.安全技術.散列函數.第1部分:總則
| Information Technology - Security Techniques - Hash Functions - Part 1: General
|
| ANSI/INCITS/ISO/IEC 10118-2-2000
| 信息技術.安全技術.散列函數.第2部分:使用n位分組密碼的散列函數
| Information Technology - Security Techniques - Hash-Functions - Part 2: Hash-Functions Using an n-Bit Block Cipher
|
| ANSI/INCITS/ISO/IEC 11770-2-1996
| 信息技術.安全技術.密鑰管理.第2部分:使用對稱技術的機制
| Information Technology - Security Techniques - Key Management - Part 2: Mechanisms Using Symmetric Techniques
|
| ANSI/INCITS/ISO/IEC 11770-3-1999
| 信息技術.安全技術.密鑰管理.第3部分:使用非對稱技術的機制
| Information Technology - Security Techniques - Key Management - Part 3: Mechanisms Using Asymmetric Techniques
|
| ANSI/INCITS/ISO/IEC 13335-1-2004
| 信息技術.安全技術.信息和通信技術安全的管理.第1部分:信息和通信技術安全管理用概念和模型
| Information technology - Security techniques - Management of information and communications technology security - Part 1: Concepts and models for information and communications technology security management
|
| ANSI/INCITS/ISO/IEC 13335-1-2004
| 信息技術.安全技術.信息和通信技術安全的管理.第1部分:信息和通信技術安全管理用概念和模型
| Information technology - Security techniques - Management of information and communications technology security - Part 1: Concepts and models for information and communications technology security management
|
| ANSI/INCITS/ISO/IEC 13888-1-2004
| 信息技術.安全技術.抗抵賴.第1部分:概述
| Information technology - Security techniques - Non-repudiation - Part 1: General
|
| ANSI/INCITS/ISO/IEC 14888-1-1998
| 信息技術.安全技術.帶附錄的數字簽名.第1部分:總則
| Information Technology - Security techniques - Digital signatures with appendix - Part 1: General
|
| ANSI/INCITS/ISO/IEC 14888-3-1998
| 信息技術.安全技術.帶附錄的數字簽名.第3部分:以證書為基礎的機制
| Information Technology - Security techniques - Digital signatures with appendix - Part 3: Certificate-based mechanisms
|
| ANSI/INCITS/ISO/IEC 15408-1-1999
| 信息技術.安全技術.IT安全的評價準則.第1部分:引言和一般模型
| Information Technology - Security techniques - Evaluation criteria for IT security - Part 1: Introduction and general model
|
| ANSI/INCITS/ISO/IEC 15408-2-1999
| 信息技術.安全技術.IT安全的評價準則.第2部分:安全功能要求
| Information Technology - Security techniques - Evaluation criteria for IT security - Part 2: Security functional requirements
|
| ANSI/INCITS/ISO/IEC 15408-3-1999
| 信息技術.安全技術.IT安全的評價準則.第3部分:安全保證要求
| Information Technology - Security Techniques - Evaluation Criteria for IT Security - Part 3: Security Assurance Requirements
|
| ANSI/INCITS/ISO/IEC 15816-2002
| 信息技術.安全技術.存取控制保密信息對象
| Information Technology - Security Techniques - Security Information Objects For Access Control
|
| ANSI/INCITS/ISO/IEC 17799-2005
| 信息技術.安全技術.信息安全管理實施規范
| Information technology - Security techniques - Code of practice for information security management
|
| ANSI/INCITS/ISO/IEC 17799-2005
| 信息技術.安全技術.信息安全管理實施規范
| Information technology - Security techniques - Code of practice for information security management
|
| ANSI/INCITS/ISO/IEC 18014-3-2004
| 信息技術.安全技術.時間標記業務.第3部分:產生鏈接標記的機制
| Information technology - Security techniques - Time-stamping services - Part 3: Mechanisms producing linked tokens
|
| ANSI/INCITS/ISO/IEC 18028-4-2005
| 信息技術.安全技術.IT網絡安全.第4部分:遠程訪問安全
| Information technology - Security techniques - IT network security - Part 4: Securing remote access
|
| ANSI/INCITS/ISO/IEC 18032-2005
| 信息技術.安全技術.素數生成
| Information technology - Security techniques - Prime number generation
|
| ANSI/INCITS/ISO/IEC 18033-1-2005
| 信息技術.安全技術.加密算法.第1部分:總則
| Information technology - Security techniques - Encryption algorithms - Part 1: General
|
| ANSI/INCITS/ISO/IEC 18033-3-2005
| 信息技術.安全技術.加密算法.第3部分:分組密碼
| Information technology - Security techniques - Encryption algorithms - Part 3: Block ciphers
|
| ANSI/INCITS/ISO/IEC 18033-4-2005
| 信息技術.安全技術.加密算法.第4部分:序列密碼
| Information technology - Securit techniques - Encryption algorithms - Part 4: Stream ciphers
|
| ANSI/INCITS/ISO/IEC 27001-2005
| 信息技術.安全技術.信息安全管理系統.要求
| Information technology - Security techniques - Information security management systems - Requirements
|
| ANSI/INCITS/ISO/IEC 27001-2005
| 信息技術.安全技術.信息安全管理系統.要求
| Information technology - Security techniques - Information security management systems - Requirements
|
| ANSI/INCITS/ISO/IEC 9796-3-2000
| 信息技術.安全技術.帶消息恢復功能的數字簽名方案.第3部分:基于離散對數機制
| Information Technology - Security Techniques - Digital Signature Schemes Giving Message Recovery - Part 3: Discrete Logarithm Based Mechanisms
|
| ANSI/INCITS/ISO/IEC 9797-1-1999
| 信息技術.安全技術.電文鑒別代碼(MACS).第1部分:用塊密碼的機制
| Information Technology - Security techniques - Message Authentication Codes (MACs) - Part 1: Mechanisms using a block cipher
|
| ANSI/INCITS/ISO/IEC 9797-2-2002
| 信息技術.安全技術.電文鑒別代碼(MACS).第2部分:專用散列函數的作用原理
| Information technology - Security techniques - Message Authentication Codes (MACs) - Part 2: Mechanisms using a dedicated hash-function
|
| ANSI/INCITS/ISO/IEC 9798-2-1999
| 信息技術.安全技術.實體鑒別.第2部分:使用對稱加密算法的機制
| Information Technology - Security techniques - Entity authentication - Part 2: Mechanisms using symmetric encipherment algorithms
|
| ANSI/INCITS/ISO/IEC 9798-4-1999
| 信息技術.安全技術.實體鑒別.第4部分:使用密碼校驗函數的機制
| Information Technology - Security techniques - Entity authentication - Part 4: Mechanisms using a cryptographic check function
|
| ANSI/INCITS/ISO/IEC 9798-5-2004
| 信息技術.安全技術.實體鑒別.第5部分:使用零知識技術的機制
| Information technology - Security techniques - Entity authentication - Part 5: Mechanisms using zero-knowledge techniques
|
| ANSI/INCITS/ISO/IEC TR13335-1-1996
| 信息技術.IT安全管理指南.第1部分:IT安全的概念和模型
| Information Technology - Guidelines for the Management of IT Security - Part 1: Concepts and Models for IT Security
|
| ANSI/INCITS/ISO/IEC TR13335-3-1998
| 信息技術.IT安全管理指南.第3部分:IT安全的管理技術
| Information Technology - Guidelines for the Management of IT Security - Part 3: Techniques for the Management of IT Security
|
| ANSI/INCITS/ISO/IEC TR13335-4-2000
| 信息技術.IT安全管理指南.第4部分:安全防衛的選擇
| Information Technology - Guidelines for the Management of IT Security - Part 4: Selection of Safeguards
|
| ANSI/INCITS/ISO/IEC TR13335-5-2001
| 信息技術.信息安全管理指南.第5部分:網絡安全管理指南
| Information Technology - Guidelines for the Management of IT Security - Part 5: Management Guidance on Network Security
|
| ANSI/ISO/IEC 10118-2-2000
| 信息技術.安全技術.散列函數.第2部分:使用n位分組密碼的散列函數
| Information Technology - Security Techniques - Hash-Functions - Part 2: Hash-Functions Using an n-Bit Block Cipher
|
| ANSI/ITSDF B56.10-2006
| 人工操作高提升工業用貨車的安全標準
| Manually Propelled High Lift Industrial Trucks, Safety Standard for
|
| ANSI/ITSDF B56.5-2005
| 工業軌道式車輛和載人工業車輛自動化功能的安全標準
| Safety Standard for Guided Industrial Vehicles and Automated Functions of Manned Industrial Vehicles
|
| ANSI/ITSDF B56.8-2006
| 人員和物料裝載車的安全標準
| Safety Standard for Personnel and Burden Carriers
|
| ANSI/ITSDF B56.9-2007
| 操作者控制的工業牽引車的安全標準
| Safety Standard for Operator Controlled Industrial Tow Tractors
|
| ANSI/NFPA 150-2007
| 畜舍設備的消防和人身安全標準
| Standard on Fire and Life Safety in Animal Housing Facilities
|
| ANSI/NFPA 1982-2006
| 個人警報安全系統(PASS)標準
| Standard on Personal Alert Safety Systems (PASS)
|
| ANSI/NFPA 241-2004
| 建筑物改建及拆除的安全防護
| Safeguarding Construction, Alteration, and Demolition Operations
|
| ANSI/NFPA 301-2008
| 從著火商船逃生的安全規程
| Code for Safety to Life from Fire on Merchant Vessels
|
| ANSI/NFPA 5000-2006
| 房屋建筑和安全規范T
| Building Construction and Safety CodeT
|
| ANSI/NFPA 804-2006
| 先進的輕水反應堆發電站的防火安全標準
| Standard for Fire Protection for Advanced Light Water Reactor Electric Generating Plants
|
| ANSI/OPEI B71.1-2003
| 消費者草皮維護設備.手扶式剪草機和座騎式剪草機.安全規范
| Consumer Turf Care Equipment - Walk-Behind Mowers and Ride-On Machines with Mowers - Safety Specifications
|
| ANSI/OPEI B71.4-1990
| 商業草皮保養設備.安全規范
| Commercial Turf Care Equipment - Safety Specifications
|
| ANSI/OPEI B71.6-2000
| 電動食品磨碎機/研磨機和食品磨碎機/裝袋機的安全規范
| Powered Shredder/Grinders and Shredder/Baggers, Safety Specifications
|
| ANSI/OPEI B71.8-1996
| 戶外電動設備.后行式動力旋耕機和手持耕耘機.安全規范
| Outdoor Power Equipment - Walk-Behind Powered Rotary Tillers and Hand Supported Cultivators - Safety Specifications
|
| ANSI/SCTE 24-10-2006
| 個人間有線通信.第10部分:安全規范
| IPCablecom Part 10: Security Specification
|
| ANSI/UL 1008-2007
| 轉換開關設備的安全標準(照明和電力用閑置的自動、手動和旁路/隔離轉換開關)
| Standard for Safety for Transfer Switch Equipment (Automatic, manual, and by-pass/isolation transfer switches for use in ordinary locations to provide for lighting and power)
|
| ANSI/UL 1026-2006
| 家用電子灶具和食品加工器具的安全標準
| Standard for Safety for Electric Household Cooking and Food Serving Appliances
|
| ANSI/UL 103-2006
| 工廠制住宅型煙囪和建筑物供暖設備的安全標準
| Standard for Safety for Factory-Built Chimneys for Residential Type and Building Heating Appliances
|
| ANSI/UL 1063-2006
| 機床線纜用安全標準
| Standard for Safety for Machine-Tool Wires and Cables
|
| ANSI/UL 1072-2007
| 中壓電力電纜的安全標準
| Standard for Safety for Medium-Voltage Power Cables (Proposal dated February 24, 2006)
|
| ANSI/UL 1077-2006
| 電氣設備用輔助保護器用安全標準
| Standard for Safety for Supplementary Protectors for Use in Electrical Equipment
|
| ANSI/UL 1082-2005
| 家用電咖啡壺和煮泡類器具的安全標準(提議日期4-15-05)
| Standard for Safety for Household Electric Coffee Makers and Brewing-Type Appliances (proposal dated 4-15-05)
|
| ANSI/UL 1086-2007
| 家用垃圾壓實器的安全標準
| Standard for Safety for Household Trash Compactors
|
| ANSI/UL 1088-2005
| 臨時照明線的安全標準
| Standard for Safety for Temporary Lighting Strings
|
| ANSI/UL 109-2004
| 易燃和可燃液體、制冷輔助設備和船上用管件的安全標準
| Standard for Safety for Tube Fittings for Flammable and Combustible Fluids, Refrigeration Service, and Marine Use
|
| ANSI/UL 10B-2001
| 門附件的燃燒試驗的安全標準
| Standard for Safety for Fire Tests of Door Assemblies
|
| ANSI/UL 10C-2001
| 門附件的正壓燃燒試驗的安全標準
| Standard for Safety for Positive Pressure Fire Tests of Door Assemblies
|
| ANSI/UL 1123-2007
| 海上漂浮裝置的安全標準
| Standard for Safety for Marine Buoyant Devices
|
| ANSI/UL 1177-2007
| 救生衣的安全標準
| The Standard for Safety for Buoyant Vests
|
| ANSI/UL 1180-2007
| 充足氣的娛樂型個人浮水裝置的安全標準
| Standard for Safety for Fully Inflatable Recreational Personal Flotation Devices
|
| ANSI/UL 1191-2007
| 個人浮水裝置部件的安全標準
| Standard for Safety for Components for Personal Flotation Devices
|
| ANSI/UL 1203-2006
| 危險(分類的)場所用防爆和防燃塵電氣設備的安全標準
| Standard for Safety for Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations
|
| ANSI/UL 1236-2006
| 裝載發電機啟動器蓄電池用蓄電池充電器的安全標準
| Standard for Safety for Battery Chargers for Charging Engine-Starter Batteries
|
| ANSI/UL 1240-2005
| 商用電子干衣設備的安全標準
| Standard for Safety for Electric Commercial Clothes-Drying Equipment
|
| ANSI/UL 1247-2007
| 離心消防泵驅動用柴油發動機的安全標準
| Standard for Safety for Diesel Engines for Driving Centrifugal Fire Pumps
|
| ANSI/UL 125-2001
| 無水氨和液化氣閥門的安全標準（安全閥除外）
| Standard for Safety for Valves for Anhydrous Ammonia and LP-Gas (Other than Safety Relief)
|
| ANSI/UL 1254-2005
| 預先設計的干式化學滅火系統裝置的安全標準
| Standard for Safety for Pre-Engineered Dry Chemical Extinguishing System Units
|
| ANSI/UL 127-1998
| 工廠生產壁爐的安全標準
| Standard for Safety for Factory-Built Fireplaces
|
| ANSI/UL 1275-2006
| 易燃液體儲存室的安全標準
| Standard for Safety for Flammable Liquid Storage Cabinets
|
| ANSI/UL 1277-2005
| 任選光纖構件的電力電纜和控制盤電纜的安全標準(第4版)
| Standard for Safety for Electrical Power and Control Tray Cables with Optional Optical-Fiber Members (4th edition)
|
| ANSI/UL 13-2007
| 有功率限制的電路電纜安全標準
| Standard for Safety for Power-Limited Circuit Cables
|
| ANSI/UL 1315-2003
| 金屬制廢紙容器安全標準
| Standard for Safety for Metal Waste Paper Containers
|
| ANSI/UL 132-2002
| 無水氨氣和液化石油氣的安全閥的安全標準
| Standard for Safety for Safety Relief Valves for Anhydrous Ammonia and LP-Gas
|
| ANSI/UL 1332-2005
| 室外電氣設備鋼外殼用有機覆層安全標準
| Standard for Safety for Organic Coatings for Steel Enclosures for Outdoor Use Electrical Equipment
|
| ANSI/UL 1419-2005
| 專業視聽設備的安全標準
| Standard for Safety for Professional Video and Audio Equipment
|
| ANSI/UL 142-2006
| 可燃和易燃液體用地上鋼貯罐的安全標準
| Standard for Safety for Steel Aboveground Tanks for Flammable and Combustible Liquids
|
| ANSI/UL 1424-2005
| 有限功率火災報警線路用電纜的安全標準
| Standard for Safety for Cables for Power-Limited Fire-Alarm Circuits
|
| ANSI/UL 1425-2006
| 非動力限制火災報警電路安全標準
| Standard for Safety for Non-Power-Limited Fire-Alarm Circuits
|
| ANSI/UL 144-2001
| 液化石油氣壓力調節閥的安全標準
| Standard for Safety for Pressure-Regulating Valves for LP Gas
|
| ANSI/UL 1446-2006
| 絕緣材料的系統用安全標準.一般要求
| Standard for Safety for Systems of Insulating Materials - General
|
| ANSI/UL 1447-2006
| 電動剪草機的安全標準
| The Standard for Safety for Electric Lawn Mowers
|
| ANSI/UL 1449-2006
| 電泳保護裝置安全標準
| Standard for Safety for Surge Protective Devices
|
| ANSI/UL 1472-2006
| 固態微光控制器安全標準
| Standard for Safety for Solid-State Dimming Controls
|
| ANSI/UL 1482-1998
| 固體燃料型房間加熱器用安全標準
| Standard for Safety for Solid-Fuel Type Room Heaters
|
| ANSI/UL 1486-2003
| 防火設施用干管閥快速打開裝置的安全標準
| Standard for Safety for Quick Opening Devices for Dry Pipe Valves for Fire Protection Service
|
| ANSI/UL 153-2005
| 便攜式電燈安全標準
| Standard for Safety for Portable Electric Luminaires
|
| ANSI/UL 154CAN/ULC-S 503-2007
| 二氧化碳滅火器的安全標準
| Standard for Safety for Carbon-Dioxide Fire Extinguishers
|
| ANSI/UL 1559-2007
| 觸電致死型昆蟲控制設備的安全標準
| Standard for Safety for Insect-Control Equipment-Electrocution Type (Bulletin dated October 31, 2003)
|
| ANSI/UL 1564-2006
| 工業蓄電池充電裝置安全標準
| Standard for Safety for Industrial Battery Chargers
|
| ANSI/UL 1581-2006
| 安全標準.電線、電纜和軟線的基準標準
| Standard for Safety - Reference Standard for Electrical Wires, Cables, and Flexible Cords
|
| ANSI/UL 1585-2006
| 2級和3級變壓器的安全標準
| Standard for Safety for Class 2 and Class 3 Transformers
|
| ANSI/UL 1598-2004
| 燈具的安全標準
| Standard for Safety for Luminaires
|
| ANSI/UL 1598A-2005
| 海船裝置用燈具的安全標準
| Standard for Safety for Luminaires for Installation on Marine Vessels
|
| ANSI/UL 1626-2003
| 民用防火噴水器安全標準
| Standard for Safety for Residential Sprinklers for Fire-Protection Service
|
| ANSI/UL 1651-2003
| 光纜安全標準
| Standard for Safety for Optical Fiber Cable
|
| ANSI/UL 1655-2004
| 社區天線電視電纜用安全標準
| Standard for Safety for Community-Antenna Television Cables
|
| ANSI/UL 1659-2005
| 軟線組和電源軟線用固定插頭開關的安全標準
| Standard for Safety for Attachment Plug Blades for Use in Cord Sets and Power Supply Cords
|
| ANSI/UL 1660-2004
| 不透液體的非金屬軟管的安全標準
| Standard for Safety for Liquid-Tight Flexible Nonmetallic Conduit
|
| ANSI/UL 1678-2003
| 與音頻/視頻設備一起使用的家用、商用和專用拖車和支架的安全標準
| Standard for Safety for Household, Commercial, and Professional-Use Carts and Stands for Use with Audio/Video Equipment
|
| ANSI/UL 1682-2007
| 針型和套管型插頭、插孔和電纜連接器的安全標準
| Standard for Safety for Plugs, Receptacles, and Cable Connectors, of the Pin and Sleeve Type
|
| ANSI/UL 1686-2007
| 引線和套管配置的安全標準(推薦日期 2006-10-20)
| Standard for Safety for Pin and Sleeve Configurations (Proposal dated October 20, 2006)
|
| ANSI/UL 1690-2006
| 數據處理電纜安全標準
| Standard for Safety for Data-Processing Cable
|
| ANSI/UL 1692-2004
| 聚合材料的安全標準.線圈型
| Standard for Safety for Polymeric Materials - Coil Forms
|
| ANSI/UL 1693-1998
| 電輻射加熱板和加熱板組安全標準
| Standard for Safety for Electric Radiant Heating Panels and Heating Panel Sets
|
| ANSI/UL 1694-2005
| 小型聚合物復合材料易燃性試驗的安全標準
| Standard for Safety for Tests for Flammability of Small Polymeric Component Materials
|
| ANSI/UL 1696-2005
| 非金屬機械防護管(NMPT)的安全標準
| Standard for Safety for the Standard for Nonmetallic Mechanical Protection Tubing (NMPT)
|
| ANSI/UL 1699-2007
| 電弧故障電路斷流器用安全標準
| Standard for Safety for Arc-Fault Circuit-Interrupters (Bulletin dated December 16, 2005)
|
| ANSI/UL 1703-2004
| 片狀光電模塊和配電盤的安全標準
| Standard for Safety for Flat-Plate Photovoltaic Modules and Panels
|
| ANSI/UL 1715-2003
| 內部涂層材料燃燒試驗的安全標準
| Standard for Safety for Fire Test of Interior Finish Material
|
| ANSI/UL 174-2005
| 家用蓄水式電水加熱器的安全標準
| Standard for Safety for Household Electric Storage Tank Water Heaters (dated 8/26/05)
|
| ANSI/UL 1740-2007
| 機器人和自動化設備的安全標準
| Standard for Safety Robots and Robotic Equipment
|
| ANSI/UL 1746-2007
| 鋼制地下儲油罐外部防腐蝕系統的安全標準(UL 1746)
| Standard for Safety for External Corrosion Protection Systems for Steel Underground Storage Tanks, UL 1746
|
| ANSI/UL 1767-2005
| 早抑制快速反應型消防噴水器的安全標準
| Standard for Safety for Early-Suppression Fast-Response Sprinklers
|
| ANSI/UL 1776-2005
| 高壓清洗機的安全標準
| Standard for Safety for High-Pressure Cleaning Machines
|
| ANSI/UL 1778-2005
| 連續電源設備的安全標準
| Standard for Safety for Uninterruptible Power Systems
|
| ANSI/UL 1784-2004
| 門組件空氣滲漏試驗的安全標準
| Standard for Safety for Air Leakage Tests for Door Assemblies
|
| ANSI/UL 1786-2005
| 直接插入式夜間照明燈具的安全標準
| Standard for Safety for Direct Plug-In Nightlights
|
| ANSI/UL 180-1997
| 燃油爐燃料用液位指示規的安全標準
| Standard for Safety for Liquid-Level Indicating Gauges for Oil Burner Fuels (Bulletin dated January 5, 2007)
|
| ANSI/UL 181-2005
| 廠制風管和風管接頭的安全標準
| The Standard for Safety for Factory-Made Air Ducts and Air Connectors
|
| ANSI/UL 181A-2005
| 與剛性風管一起使用的密閉系統的安全標準
| Standard for Safety for Closure Systems for Use With Rigid Air Ducts
|
| ANSI/UL 181B-2005
| 與柔性風管和風管接頭一起使用的密閉系統的安全標準
| Standard for Safety for Closure Systems for Use With Flexible Air Ducts and Air Connectors
|
| ANSI/UL 183-2007
| 制造布線系統的安全標準
| Standard for Safety for Manufactured Wiring Systems (Proposal dated 2-16-07)
|
| ANSI/UL 1838-2007
| 低壓風景照明系統的安全標準
| Standard for Safety for Low Voltage Landscape Lighting Systems
|
| ANSI/UL 1839-2007
| 汽車蓄電池電瓶線的安全標準
| Standard for Safety for Automotive Battery Booster Cables
|
| ANSI/UL 1889-2004
| 烹調油用商用過濾器安全標準
| Standard for Safety for Commercial Filters for Cooking Oil
|
| ANSI/UL 1897-2004
| 屋頂層覆蓋系統抬起試驗的安全標準
| Standard for Safety for Uplift Tests For Roof Covering Systems
|
| ANSI/UL 1917-2002
| 固態風機速度控制器的安全標準
| Standard for Safety for Solid-State Fan Speed Controls
|
| ANSI/UL 1951-2003
| 電動管附件安全標準
| Standard for Safety for Electric Plumbing Accessories
|
| ANSI/UL 1963-2005
| 制冷劑回收/再循環設備安全標準
| Standard for Safety for Refrigerant Recovery/Recycling Equipment
|
| ANSI/UL 1978-2005
| 潤滑脂管道的安全標準
| Standard for Safety for Grease Ducts
|
| ANSI/UL 198M-2003
| 礦山用熔斷器的安全標準
| Standard for Safety for Mine-Duty Fuses
|
| ANSI/UL 1990-2007
| 帶導線的非金屬地下導管的安全標準
| Standard for Safety for Nonmetallic Underground Conduit with Conductors
|
| ANSI/UL 1996-2006
| 電氣管道加熱器的安全標準
| Standard for Safety for Electric Duct Heaters
|
| ANSI/UL 1998-1999
| 可編程元件中軟件的安全標準
| Standard for Safety for Software in Programmable Components
|
| ANSI/UL 201-2006
| 車庫設備的安全標準
| Standard for Safety for Garage Equipment
|
| ANSI/UL 203-2005
| 消防用管子懸掛設備的安全標準
| Standard for Safety for Pipe Hanger Equipment for Fire Protection Service
|
| ANSI/UL 2034-2005
| 單一和多測點一氧化碳探測器的安全標準
| Standard for Safety for Single and Multiple Station Carbon Monoxide Detectors
|
| ANSI/UL 2044-2004
| 商用電視設備的安全標準
| Standard for Safety for Commercial Circuit Television Equipment
|
| ANSI/UL 2079-2006
| 建筑物連接系統的防火試驗安全標準
| Standard for Safety for Tests for Fire Resistance of Building Joint Systems
|
| ANSI/UL 207a-2004
| 非電氣的含制冷劑的元件和附件安全標準
| Standard for Safety for Refrigerant-Containing Components and Accessories, Nonelectrical (Bulletin dated 09/03/04)
|
| ANSI/UL 2111-2002
| 電動機過熱保護的安全標準
| Standard for Safety for Overheating Protection for Motors
|
| ANSI/UL 2129CAN/ULC-S 566-2007
| 鹵化烴清潔劑滅火器的安全標準
| Standard for Safety for Halocarbon Clean Agent Fire Extinguishers
|
| ANSI/UL 213-2004
| 消防設備用加橡膠襯墊的管配件的安全標準
| Standard for Safety for Rubber Gasketed Fittings for Fire Protection Service
|
| ANSI/UL 2157-2004
| 電動洗衣機和甩干機的安全標準
| Standard for Safety for Electric Clothes Washing Machines and Extractors
|
| ANSI/UL 2167-2004
| 消防設備用水霧噴嘴的安全標準
| Standard for Safety for Water Mist Nozzles for Fire-Protection Service
|
| ANSI/UL 218-2005
| 消防泵控制器的安全標準
| Standard for Safety for Fire Pump Controllers
|
| ANSI/UL 2200-2004
| 固定式發動機驅動型發電機組件的安全標準
| Standard for Safety for Stationary Engine Generator Assemblies
|
| ANSI/UL 2202-2004
| 電子車輛充電系統設備的安全標準
| Standard for Safety for Electric Vehicle (EV) Charging System Equipment
|
| ANSI/UL 2225-2005
| 分類危險場所用的電纜和電纜裝配安全標準
| Standard for Safety for Cables and Cable-Fittings for Use in Hazardous (Classified) Locations
|
| ANSI/UL 2250-2006
| 儀器儀表裝置用盤式電纜的安全標準
| Standard for Safety for Instrumentation Tray Cable
|
| ANSI/UL 2255-2006
| 插塞的安全標準
| Standard for Safety for Receptacle Closures
|
| ANSI/UL 2267-2006
| 工業電瓶貨車設備用燃料電池電源系統安全標準
| Standard for Safety for Fuel Cell Power Systems for Installation in Industrial Electric Trucks
|
| ANSI/UL 2279-1997
| I級0、1和2類危險場所中使用的電氣設備的安全標準
| Standard for Safety for Electrical Equipment for Use in Class I, Zone 0, 1, and 2 Hazardous (Classified) Locations
|
| ANSI/UL 2351-2004
| 防火用噴嘴的安全標準
| Standard for Safety for Spray Nozzles for Fire-Protection Service
|
| ANSI/UL 2388-2006
| 柔性照明產品的安全標準
| Standard for Safety for Flexible Lighting Products
|
| ANSI/UL 2390-2004
| 帶密封板的防風瀝青墻面板試驗方法的安全標準
| Standard for Safety for Test Method for Wind Resistant Asphalt Shingles with SealedTabs
|
| ANSI/UL 2438-2006
| 戶外季節性使用的電線連接的布線設備的安全標準
| Standard for Safety for Outdoor Seasonal-Use Cord-Connected Wiring Devices
|
| ANSI/UL 248-1-2005
| 低壓熔斷器安全標準.第1部分:一般要求
| Standard for Safety for Low-Voltage Fuses - Part 1: General Requirements
|
| ANSI/UL 248-10-2004
| 低壓熔斷器安全標準.第10部分:L類熔斷器
| Standard for Safety for Low-Voltage Fuses - Part 10: Class L Fuses
|
| ANSI/UL 248-11-2005
| 低壓熔斷器安全標準.第11部分:插入式熔斷器
| Standard for Safety for Low-Voltage Fuses - Part 11: Plug Fuses
|
| ANSI/UL 248-12-2005
| 低壓熔斷器安全標準.第12部分:R類熔斷器
| Standard for Safety for Low-Voltage Fuses - Part 12: Class R Fuses
|
| ANSI/UL 248-13-2005
| 低壓熔斷器安全標準.第13部分:半導體熔斷器
| Standard for Safety for Low-Voltage Fuses - Part 13: Semiconductor Fuses
|
| ANSI/UL 248-14-2005
| 低壓熔斷器安全標準.第14部分:輔助熔斷器
| Standard for Safety for Low-Voltage Fuses - Part 14: Supplemental Fuses
|
| ANSI/UL 248-15-2005
| 低壓熔斷器安全標準.第15部分:T類熔斷器
| Standard for Safety for Low-Voltage Fuses - Part 15: Class T Fuses
|
| ANSI/UL 248-16-2004
| 低壓熔斷器安全標準.第16部分:試驗限制器
| Standard for Safety for Low-Voltage Fuses - Part 16: Test Limiters
|
| ANSI/UL 248-2-2005
| 低壓熔斷器安全標準.第2部分:C類熔斷器
| Standard for Safety for Low-Voltage Fuses - Part 2: Class C Fuses
|
| ANSI/UL 248-3-2005
| 低壓熔斷器安全標準.第3部分:CA和CB類熔斷器
| Standard for Safety for Low-Voltage Fuses - Part 3: Class CA and CB Fuses
|
| ANSI/UL 248-4-2005
| 低壓熔斷器安全標準.第4部分:CC類熔斷器
| Standard for Safety for Low-Voltage Fuses - Part 4: Class CC Fuses
|
| ANSI/UL 248-5-2005
| 低壓熔斷器安全標準.第5部分:G類熔斷器
| Standard for Safety for Low-Voltage Fuses - Part 5: Class G Fuses
|
| ANSI/UL 248-6-2005
| 低壓熔斷器安全標準.第6部分:H類不可更新熔斷器
| Standard for Safety for Low-Voltage Fuses - Part 6: Class H Non-Renewable Fuses
|
| ANSI/UL 248-7-2005
| 低壓熔斷器安全標準.第7部分:H類可更新熔斷器
| Standard for Safety for Low-Voltage Fuses - Part 7: Class H Renewable Fuses
|
| ANSI/UL 248-8-2005
| 低壓熔斷器安全標準.第8部分:J類熔斷器
| Standard for Safety for Low-Voltage Fuses - Part 8: Class J Fuses
|
| ANSI/UL 248-9-2005
| 低壓熔斷器安全標準.第9部分:K類熔斷器
| Standard for Safety for Low-Voltage Fuses - Part 9: Class K Fuses
|
| ANSI/UL 2556-2007
| 電線和電纜試驗方法的安全標準
| Standard for Safety for Wire and Cable Test Methods
|
| ANSI/UL 263-2003
| 建筑結構和材料防火試驗的安全標準
| Standard for Safety for Fire Tests of Building Construction and Materials
|
| ANSI/UL 283-2007
| 空氣清新劑和除臭劑的安全標準
| Standard for Safety for Air Fresheners and Deodorizers
|
| ANSI/UL 296A-2004
| 廢油燃燒空氣加熱設施安全標準
| Standard for Safety for Waste Oil-Burning Air-Heating Appliances
|
| ANSI/UL 299CAN/ULC-S 504-2007
| 干化學滅火器安全標準
| Standard for Safety for Dry Chemical Fire Extinguishers
|
| ANSI/UL 300-2005
| 餐廳烹飪區保護用消防系統火災試驗的安全標準
| Standard for Safety for Fire Testing of Fire Extinguishing Systems for Protection of Restaurant Cooking Areas
|
| ANSI/UL 3044-1998
| 監視用閉路電視設備安全標準
| Standard for Safety for Surveillance Closed Circuit Television Equipment
|
| ANSI/UL 305-2007
| 應急設備的安全標準
| Standard for Safety for Panic Hardware
|
| ANSI/UL 325-2007
| 門、窗簾、大門、百頁窗和窗戶控制器及系統的安全標準
| Standard for Safety for Door, Drapery, Gate, Louver, and Window Operators and Systems)
|
| ANSI/UL 346-2005
| 防火信令系統用水流量指示器的安全標準
| Standard for Safety for Waterflow Indicators for Fire Protective Signaling Systems
|
| ANSI/UL 365-2004
| 與警察局相連的防盜警報裝置和系統的安全標準
| Standard for Safety for Police Station Connected Burglar Alarm Units and Systems
|
| ANSI/UL 391-2006
| 燒固體燃料和組合燃料的中心和輔助爐的安全標準
| Standard for Safety for Solid-Fuel and Combination-Fuel Central and Supplementary Furnaces
|
| ANSI/UL 399-2004
| 飲用水冷卻器安全標準
| Standard for Safety for Drinking Water Coolers
|
| ANSI/UL 401-2004
| 防火服務用便攜式噴霧軟管噴嘴的安全標準
| Standard for Safety for Portable Spray Hose Nozzles for Fire-Protection Service (bulletin dated February 16, 2004)
|
| ANSI/UL 404-2006
| 壓縮氣體裝置用壓力指示計的安全標準
| Standard for Safety for Gauges, Indicating Pressure, for Compressed Gas Service
|
| ANSI/UL 405-2004
| 消防機構連接管線的安全標準
| Standard for Safety for Fire Department Connections
|
| ANSI/UL 407-2004
| 壓縮氣體用多支管的安全標準
| Standard for Safety for Manifolds for Compressed Gases
|
| ANSI/UL 414-2006
| 儀表插座的安全標準
| Standard for Safety for Meter Sockets
|
| ANSI/UL 4248-1-2007
| 熔斷器支架安全標準.第1部分:一般要求
| Standard for Safety for Fuseholders - Part 1: General Requirements
|
| ANSI/UL 4248-11-2007
| 熔斷器支持件安全標準.第11部分:C型(愛迪生底座)和S型插入式熔斷器
| Standard for Safety for Fuseholders - Part 11: Type C (Edison Base) and Type S Plug Fuse
|
| ANSI/UL 4248-12-2007
| 熔斷器支架安全標準.第12部分:R類
| Standard for Safety for Fuseholders - Part 12: Class R
|
| ANSI/UL 4248-15-2007
| 熔斷器支架安全標準.第15部分:T類
| Standard for Safety for Fuseholders - Part 15: Class T
|
| ANSI/UL 4248-4-2007
| 熔斷器支架安全標準.第4部分:CC類
| Standard for Safety for Fuseholders - Part 4: Class CC
|
| ANSI/UL 4248-5-2007
| 熔斷器支架安全標準.第5部分:G類
| Standard for Safety for Fuseholders - Part 5: Class G
|
| ANSI/UL 4248-6-2007
| 熔斷器支架安全標準.第6部分:H類
| Standard for Safety for Fuseholders - Part 6: Class H
|
| ANSI/UL 4248-8-2007
| 熔斷器支架安全標準.第8部分:J類
| Standard for Safety for Fuseholders - Part 8: Class J
|
| ANSI/UL 4248-9-2007
| 熔斷器支架安全標準.第9部分:K類
| Standard for Safety for Fuseholders - Part 9: Class K
|
| ANSI/UL 427-2006
| 制冷裝置的安全標準
| Standard for Safety for Refrigerating Units
|
| ANSI/UL 441-2006
| 透氣管道安全標準
| Standard for Safety for Gas Vents
|
| ANSI/UL 444-2006
| 通信電纜安全標準
| Standard for Safety for Communications Cables
|
| ANSI/UL 448-2007
| 消防設備用泵的安全標準
| Standard for Safety for Pumps for Fire-Protection Service
|
| ANSI/UL 458-2006
| 游樂車輛電力變流器及電力變流器系統的安全標準
| Recreational Vehicles, Safety Standard for Power Converters and Power-Converter Systems
|
| ANSI/UL 482-2005
| 便攜式太陽能/熱能燈安全標準
| Standard for Safety for Portable Sun/Heat Lamps
|
| ANSI/UL 484-2005
| 房間空氣調節器的安全標準
| Standard for Safety for Room Air Conditioners
|
| ANSI/UL 486D-2005
| 密封導線連接器的安全標準
| Standard for Safety for Sealed Wire Connectors
|
| ANSI/UL 489-2006
| 模壓外殼斷路器、模壓外殼開關和斷路器外殼的安全標準（推薦日期2006-3-10）
| Standard for Safety for Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures (Proposals dated March 10, 2006)
|
| ANSI/UL 497-2004
| 雙導線通信電路保護器的安全標準
| Standard for Safety for Protectors for Paired Conductor Communications Circuits
|
| ANSI/UL 498A-2003
| 分插座和轉接器的安全標準
| Standard for Safety for Current Taps and Adapters
|
| ANSI/UL 499-2005
| 電加熱設備的安全標準
| Standard for Safety for Electric Heating Appliances
|
| ANSI/UL 5085-1-2006
| 低壓變壓器安全標準.第1部分:一般要求
| Standard for Safety for Low Voltage Transformers - Part 1: General Requirements
|
| ANSI/UL 5085-2-2006
| 低壓變壓器安全標準.第2部分:一般用途變壓器
| Standard for Safety for Low Voltage Transformers - Part 2: General Purpose Transformers
|
| ANSI/UL 5085-3-2006
| 低壓變壓器安全標準.第3部分:2和3類變壓器
| Standard for Safety for Low Voltage Transformers - Part 3: Class 2 and Class 3 Transformers
|
| ANSI/UL 50E-2007
| 電氣設備用外殼環境考慮的安全標準
| Standard for Safety for Enclosures for Electrical Equipment, Environmental Considerations
|
| ANSI/UL 514A-2007
| 金屬出線盒安全標準
| Standard for Safety for Metallic Outlet Boxes
|
| ANSI/UL 514B-2007
| 導管、管道和電纜配件用安全標準
| Standard for Safety for Conduit, Tubing, and Cable Fittings
|
| ANSI/UL 542-2005
| 熒光燈用起動器的安全標準
| Standard for Safety for Starters for Fluorescent Lamps
|
| ANSI/UL 555-2006
| 防火器安全標準
| Standard for Safety for Fire Dampers
|
| ANSI/UL 555S-2006
| 防煙器安全標準
| Standard for Safety for Smoke Dampers
|
| ANSI/UL 568-2004
| 非金屬電纜盤系統的安全標準
| Standard for Safety for Nonmetallic Cable Tray Systems
|
| ANSI/UL 588-2006
| 季節和假日用裝飾品的安全標準
| Standard for Safety for Seasonal and Holiday Decorative Products
|
| ANSI/UL 5A-2003
| 非金屬表面電纜管道和配件的安全標準
| Standard for Safety for Non-Metallic Surface Raceways and Fittings
|
| ANSI/UL 60079-0-2005
| 爆炸性氣體環境用電氣設備的安全標準.第0部分:一般要求
| Standard for Safety for Electrical Apparatus Gas Explosive - Part 0: General Requirements
|
| ANSI/UL 60079-1-2005
| 爆炸性氣體環境用電氣設備的安全標準.第6部分:防火外殼"d"型
| Standard for Safety for Electrical Apparatus Gas Explosive - Part 6: Flameproof enclosurers "d"
|
| ANSI/UL 60079-11-2002
| 爆炸性氣體環境用電氣設備的安全標準.第11部分:原有安全度"i"
| Standard for Safety for Electrical Apparatus for Explosive Gas Atmospheres - Part 11: Intrinsic Safety "i"
|
| ANSI/UL 60079-15-2002
| 爆炸性氣體環境用電氣設備的安全標準.第15部分:防護類型"n"
| Standard for Safety for Electrical Apparatus Gas Explosive - Part 15: Type of Protection "n"
|
| ANSI/UL 60079-18-2005
| 爆炸性氣體環境用電氣設備的安全標準.第18部分:封裝"m"型
| Standard for Safety for Electrical Apparatus for Explosive Gas Atmospheres - Part 18: Encapsulation "m"
|
| ANSI/UL 60079-5-2002
| 爆炸性氣體環境用電氣設備的安全標準.第5部分:填充粉末"q"
| Standard for Safety for Electrical Apparatus for Explosive Gas Atmospheres - Part 5: Powder Filling "q"
|
| ANSI/UL 60079-6-2002
| 爆炸性氣體環境用電氣設備的安全標準.第6部分:油浸"o"
| Standard for Safety for Electrical Apparatus for Explosive Gas Atmospheres - Part 6: Oil-Immersion "o"
|
| ANSI/UL 60079-7-2002
| 爆炸性氣體環境用電氣設備的安全標準.第7部分:安全性增強"e"
| Standard for Safety for Electrical Apparatus Gas Explosive - Part 7: Increased safety "e"
|
| ANSI/UL 60335-2-3-2005
| 家用和類似用途電器的安全標準.第2部分:電熨斗的特殊要求
| Standard for Safety of Household and Similar Electrical Appliances, Part 2: Particular Requirements for Electric Irons
|
| ANSI/UL 60335-2-34-2005
| 家用和類似用途電器的安全標準.第2部分:電動壓縮機的特殊要求
| Standard for Safety for Household and Similar Electrical Appliances, Part 2: Particular Requirements for Motor-Compressors
|
| ANSI/UL 60730-2-8-2007
| 家用和類似用途的自動電氣控制器的安全標準.第2部分:電動水閥的特殊要求(包括機械要求)
| Standard for Safety for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Water Valves, Including Mechanical Requirements
|
| ANSI/UL 60745-2-11-2004
| 手持式電動工具的安全標準.安全.第2-11部分:往復鋸的特殊要求
| Standard for Safety for Hand-Held Motor-Operated Electric Tools - Safety - Part 2-11: Particular Requirements for Reciprocating Saws
|
| ANSI/UL 60745-2-12-2005
| 手持式電動工具的安全標準.安全.第2-12部分:混凝土振搗器的特殊要求
| Standard for Safety for Hand-held Motor-operated Electric Tools - Safety - Part 2-12: Particular Requirements for Concrete Vibrators
|
| ANSI/UL 60745-2-18-2005
| 手持式電動工具的安全標準.安全.第2-18部分:打包工具的特殊要求
| Standard for Safety for Hand-held Motor-operated Electric Tools - Safety - Part 2-18: Particular Requirements for Strapping Tools
|
| ANSI/UL 60745-2-19-2005
| 手持式電動工具的安全標準.安全.第2-19部分:刨邊機的特殊要求
| Standard for Safety for Hand-Held Motor-Operated Electric Tools - Safety - Part 2-19: Particular Requirements for Jointers
|
| ANSI/UL 60745-2-20-2005
| 手持式電動工具的安全標準.安全.第2-20部分:帶鋸的特殊要求
| Standard for Safety for Hand-held Motor-operated Electric Tools - Safety - Part 2-20: Particular Requirements for Band Saws
|
| ANSI/UL 60745-2-21-2005
| 手持式電動工具的安全標準.安全.第2-21部分:排水溝清理機的特殊要求
| Standard for Safety for Hand-held Motor-operated Electric Tools - Safety - Part 2-21: Particular Requirements for Drain Cleaners
|
| ANSI/UL 60947-1-2007
| 低壓開關設備和控制設備的安全標準.第1部分:總則
| Standard for Safety for Low-Voltage Switchgear and Controlgear - Part 1: General Rules
|
| ANSI/UL 60947-4-1-2007
| 低壓開關設備和控制設備的安全標準.第4-1部分:電流接觸器和電動機起動器.電機接觸器和電動機起動器
| Standard for Safety for Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
|
| ANSI/UL 60947-5-2-2007
| 低壓開關設備和控制設備的安全標準.第5-2部分:控制電路裝置和開關元件.近接開關
| Standard for Safety for Low-Voltage Switchgear and Controlgear - Part 5-2: Control Circuit Devices and Switching Elements - Proximity Switches
|
| ANSI/UL 61010-1-2005
| 測量、控制和實驗室用電氣設備的安全標準.第1部分:一般要求
| Standard for Safety for Electrical Equipment for Measurement, Control, and Laboratory Use; Part 1: General Requirements
|
| ANSI/UL 61058-1-2005
| 器具開關的安全標準
| Standard for Safety for Switches for Appliances
|
| ANSI/UL 61496-2-2001
| 電敏保護設備的安全標準.第2部分:使用有源光電子保護裝置的設備的特殊要求
| Standard for Safety for Electro-Sensitive Protective Equipment, Part 2: Particular Requirements for Equipment Using Active Opto-electronic Protective Devices
|
| ANSI/UL 618-2003
| 混凝土圬工砌筑單元的安全規范
| Standard for Safety for Concrete Masonry Units
|
| ANSI/UL 621-2005
| 冰淇淋制造機的安全標準
| Standard for Safety for Ice Cream Makers
|
| ANSI/UL 626CAN/ULC-S 507-2007
| 水力滅火器的安全標準
| Standard for Safety for Water Fire Extinguishers 5
|
| ANSI/UL 641-2005
| L型低溫通風系統安全標準
| Standard for Safety for Type L Low-Temperature Venting Systems
|
| ANSI/UL 67-2006
| 配電盤的安全標準
| Standard for Safety for Panelboards
|
| ANSI/UL 696-2006
| 電動玩具的安全標準（推薦日期2006-4-7）
| Standard for Safety for Electric Toys (Proposal dated April 7, 2006)
|
| ANSI/UL 710B-2004
| 再循環系統安全標準
| Standard for Safety for Recirculating Systems
|
| ANSI/UL 719-2007
| 非金屬護套電纜安全標準
| Standard for Safety for Nonmetallic-Sheathed Cables
|
| ANSI/UL 72-2005
| 記錄保護設備耐火性試驗的安全標準
| Standard for Safety for Tests for Fire Resistance of Record Protection Equipment
|
| ANSI/UL 723-2005
| 建筑材料表面燃燒特性試驗的安全標準
| Standard for Safety for the Test for Surface Burning Characteristics of Building Materials
|
| ANSI/UL 745-1-2004
| 便攜式電動工具的安全標準.第1部分:一般要求
| Standard for Safety for Portable Electric Tools - Part 1: General Requirements
|
| ANSI/UL 745-2-3-2006
| 研磨機、拋光機和盤式砂輪機特殊要求的安全標準
| Standard For Safety For Particular Requirements for Grinders, Polishers and Disk-Type Sanders
|
| ANSI/UL 745-2-30-2006
| 訂書機的安全標準.特殊要求
| Standard For Safety For Particular Requirements for Staplers
|
| ANSI/UL 745-2-31-2006
| 金剛石芯鉆頭的安全標準.特殊要求
| Standard for Safety for Particular Requirements for Diamond Core Drills
|
| ANSI/UL 745-2-32-2006
| 磁性鉆壓床的安全標準.特殊要求
| Standard for Safety for Particular Requirements for Magnetic Drill Presses
|
| ANSI/UL 745-2-36-2006
| 手動工具的安全標準.特殊要求
| Standard for Safety for Particular Requirements for Hand Motor Tools
|
| ANSI/UL 745-4-36-2006
| 電池組手動工具的特殊要求安全標準
| Standard for Safety for Particular Requirements for Battery Operated Hand Motor Tools
|
| ANSI/UL 746A-2006
| 聚合材料的安全標準.短期性能評價
| Standard for Safety for Polymeric Materials - Short Term Property Evaluations
|
| ANSI/UL 746B-2006
| 聚合材料安全標準.長期性狀評價
| Standard for Safety for Polymeric Materials - Long Term Property Evaluations
|
| ANSI/UL 746E-2007
| 聚合材料的安全標準.工業層壓薄板、纖維纏繞管材、硫化纖維和印刷電路板用材料
| Standard for Safety for Polymeric Materials - Industrial Laminates, Filament Wound Tubing, Vulcanized Fibre, and Materials Used in Printed Wiring Boards
|
| ANSI/UL 746F-2006
| 聚合材料的安全標準.印刷電路板和柔性材料互連結構用柔性介質薄膜材料
| Standard for Safety for Polymeric Materials - Flexible Dielectric Film Materials For Use in Printed Wiring Boards and Flexible Material Interconnect Constructions
|
| ANSI/UL 751-2005
| 自動售貨機安全標準
| Standard for Safety for Vending Machines
|
| ANSI/UL 763-2004
| 電動商用食品準備機器的安全標準
| Standard for Safety for Motor-Operated Commercial Food Preparing Machines
|
| ANSI/UL 79-2005
| 石油分配系統用電動泵的安全標準
| Standard for Safety for Power-Operated Pumps for Petroleum Dispensing Systems
|
| ANSI/UL 790-2004
| 屋頂層材料防火試驗的安全標準
| Standard for Safety for Tests for Fire Resistance of Roof Covering Materials
|
| ANSI/UL 793-2004
| 用于煙和熱的自動操作屋頂通風孔的安全標準
| Standard for Safety for Automatically Operated Roof Vents for Smoke and Heat
|
| ANSI/UL 796F-2006
| 撓性材料互連結構的安全標準
| Standard for Safety for Flexible Materials Interconnect Constructions (Proposals dated 6/16/06)
|
| ANSI/UL 80-2007
| 燃油噴嘴燃料用鋼制槽罐的安全標準
| Standard for Safety for Steel Tanks for Oil-Burner Fuel (Bulletin dated June 22, 2007)
|
| ANSI/UL 810-1998
| 電容器安全標準
| Standard for Safety for Capacitors
|
| ANSI/UL 817-2007
| 電纜集和電源電纜用安全標準
| Standard for Safety for Cord Sets and Power-Supply Cords (Proposal dated March 9, 2007)
|
| ANSI/UL 82-2007
| 電動園藝器具用安全標準
| Standard for Safety for Electric Garden Appliances
|
| ANSI/UL 840-2007
| 包括間隙和漏電距離的絕緣配合用安全標準
| Standard for Safety for Insulation Coordination Including Clearances and Creepage
|
| ANSI/UL 854-2007
| 引入電纜的安全標準
| Standard for Safety for Service-Entrance Cables
|
| ANSI/UL 858A-2007
| 家用電灶與安全有關的固態控制器安全標準
| Standard for Safety for Safety-Related Solid-State Controls for Household Electric Ranges
|
| ANSI/UL 884-2007
| 地板下導線管和配件的安全標準
| Standard for Safety for Underfloor Raceways and Fittings
|
| ANSI/UL 896-2004
| 燃油爐安全標準
| Standard for Safety for Oil-Burning Stoves
|
| ANSI/UL 8CAN/ULC-S 554-2007
| 水基試劑滅火器的安全標準
| Standard for Safety for Water Based Agent Fire Extinguishers
|
| ANSI/UL 9-2004
| 窗戶組件燃燒試驗的安全標準
| Standard for Safety for Fire Tests of Window Assemblies
|
| ANSI/UL 907-2006
| 壁爐組件安全標準
| Standard for Safety for Fireplace Accessories
|
| ANSI/UL 913-2006
| 在I、II、III級1區危險場所使用的內在安全裝置和附屬裝置的安全標準
| Standard for Safety for Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, III, Division 1, Hazardous (Classified) Locations
|
| ANSI/UL 921-2005
| 商用洗碗機安全標準
| Standard for Safety for Commercial Dishwashers
|
| ANSI/UL 923-2007
| 微波灶具安全標準
| Standard for Safety for Microwave Cooking Appliances
|
| ANSI/UL 982-2007
| 動力驅動的家用食品加工機的安全標準
| Standard for Safety for Motor-Operated Household Food Preparing Machines
|
| ASME A 17.1b Addenda-2003
| 提升機和自動電梯安全規范.補充件
| (Safety code for elevators and escalators; Addenda)
|
| ASME A90.1-1997
| 皮帶式載人升降機的安全標準
| (Safety standard for belt manlifts)
|
| ASME A90.1a Addenda-1999
| 皮帶式載人升降機的安全標準
| (Safety standard for belt manlifts)
|
| ASME B15.1 Interpretations Jan
| 機械動力傳動設備的安全標準的說明
| (Interpretations: Safety standard for mechanical power transmission apparatus)
|
| ASME B15.1-2000
| 機械動力傳動裝置的安全標準
| (Safety standard for mechanical power transmission apparatus)
|
| ASME B19.1-1995
| 空氣壓縮機系統的安全標準
| (Safety standard for air compressor systems)
|
| ASME B19.3-1991
| 加工工業用壓縮機的安全標準
| (Safety standard for compressors for process industries)
|
| ASME B19.3a Addenda-1994
| 加工工業用壓縮機的安全標準.修改件
| (Safety standard for compressors for process industries; Addenda)
|
| ASME B19.3b Addenda-1995
| 制造工業用壓縮機的安全標準
| (Safety standard for compressors for process industries)
|
| ASME B20.1 Interpretations Jan
| 輸送機及其相關設備的安全標準的說明
| (Interpretations: Safety Standard for conveyors and related equipment)
|
| ASME B20.1 Interpretations Oct
| 輸送機及其相關設備的安全標準的說明
| (Interpretations: Safety Standard for conveyors and related equipment)
|
| ASME B30.9-1996
| 懸?guī)?空中索道、起重機、鐵塔架、升降機、釣勾, 旗桿架的安全標準
| (Slings - Safety standard for cableways, cranes, derricks, hoists, hooks, jacks, and slings)
|
| ASME B56.1 Interpretations Jan
| 低提升和高提升裝卸車安全標準的說明
| (Interpretations: Safety standard for low lift and high lift trucks)
|
| ASME B56.1-2000
| 低升程和高升程貨車的安全標準
| (Safety standard for low lift and high lift trucks)
|
| ASME B56.10-1992
| 人工操作高提升工業裝卸車的安全標準
| (Safety standard for manually propelled high lift industrial trucks)
|
| ASME B56.1a Addenda-2001
| 低提升和高提升裝卸車安全標準.ASME B 56.1-2000的補充件
| (Safety standard for low lift and high lift trucks; Addenda to ASME B 56.1-2000)
|
| ASME B56.1b Addenda-2003
| 低升降和高升降式裝卸車的安全標準.補充件
| (Safety standard for low lift and high lift trucks; Addenda)
|
| ASME B56.5 Interpretations Jul
| 工業軌道式車輛和載人工業車輛自動化功能的安全標準說明
| (Interpretations: Safety standard for guided industrial vehicles and automated functions of manned industrial vehicles)
|
| ASME B56.5-1993
| 工業軌道式車輛和載人工業車輛自動化功能的安全標準
| (Safety standard for guided industrial vehicles and automated functions of manned industrial vehicles)
|
| ASME B56.5a Addenda-1994
| 工業軌道式車輛和載人工業車輛自動化功能的安全標準修改件
| (Safety standard for guided industrial vehicles and automated functions of manned industrial vehicles; Addenda)
|
| ASME B56.6 Interpretations Mar
| 不平地用的鏟車的安全標準的說明
| (Interpretations: Safety standard for rough terrain forklift trucks)
|
| ASME B56.7-1987
| 工業卡車起重機的安全標準
| (Safety standard for industrial crane trucks)
|
| ASME B56.8 Interpretations Aug
| 人和料運載工具的安全標準的說明
| (Interpretations: Safety standard for personnel and burden carriers)
|
| ASME B56.8-1993
| 人和料運載工具的安全標準
| (Safety standard for personnel and burden carriers)
|
| ASME B56.8a Addenda-1994
| 人和料運載工具的安全標準.修改件
| (Safety standard for personnel and burden carriers; Addenda)
|
| ASME B56.9 Interpretations 199
| 人工操作的工業牽引車安全標準說明
| (Interpretations: Safety standard for operator controlled industrial tow tractors)
|
| ASME B56.9-1992
| 人工操作工業牽引拖拉機的安全標準
| (Safety standard for operator controlled industrial tow tractors)
|
| ASME B56.9a Addenda-1992
| 人工操作工業牽引拖拉機的安全標準修改件
| (Safety standard for operator controlled industrial tow tractors; Addenda)
|
| ASTM A 143/A 143M-2007
| 熱浸鍍鋅結構鋼制品的防脆裂安全措施和探測脆裂用程序的標準實施規程
| Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
|
| ASTM A 384/A 384M-2007
| 鋼組件熱浸鍍鋅時抗扭曲和變形的安全措施用標準實施規程
| Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
|
| ASTM E 50-2000
| 金屬、礦物和相關材料的化學分析用儀器、試劑和安全措施的標準操作規程
| Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
|
| ASTM F 1004-2007
| 膨脹門和膨脹圍欄用消費者安全標準規范
| Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures
|
| ASTM F 1235-2003
| 便攜式鉤接式座椅的消費者安全標準規范
| Consumer Safety Specification for Portable Hook-on Chairs
|
| ASTM F 1250-2000
| 固定式訓練用自行車的消費者安全規范
| Standard Safety Specification for Stationary Exercise Bicycles
|
| ASTM F 1352-2002
| 固定刃的粗大尖形鐵箭頭的性能和安全標準的標準指南
| Standard Guide for Fixed Blade Broadhead Performance and Safety Standards
|
| ASTM F 1427-2007
| 床鋪用消費者安全標準規范
| Standard Consumer Safety Specification for Bunk Beds
|
| ASTM F 1816-1997
| 兒童外上衣上綜線的標準安全規范
| Standard Safety Specification for Drawstrings on Children's Upper Outerwear
|
| ASTM F 1821-2006
| 嬰兒床的消費者安全標準規范
| Standard Consumer Safety Specification for Toddler Beds
|
| ASTM F 1912-1998
| 豆袋椅安全標準規范
| Standard Specification for Safety of Bean Bag Chairs
|
| ASTM F 1967a-2007
| 兒童浴室椅的消費者安全標準規范
| Standard Consumer Safety Specification for Infant Bath Seats
|
| ASTM F 2006-2000
| 非緊急出口和營救窗口用窗下落防護裝置的標準安全規范
| Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows
|
| ASTM F 2057-2004
| 柜、門柜和廚柜標準安全規范
| Standard Safety Specification for Chests, Door Chests, and Dressers
|
| ASTM F 2085-2007
| 活動式床圍欄的消費者安全標準規范
| Standard Consumer Safety Specification for Portable Bed Rails
|
| ASTM F 2167b-2005
| 嬰兒用彈性座椅的標準消費者安全規范
| Standard Consumer Safety Specification for Infant Bouncer Seats
|
| ASTM F 2201-2002
| 通用打火機的消費者安全標準規范
| Standard Consumer Safety Specification for Utility Lighters
|
| ASTM F 2225-2006
| 蹦床外罩的消費者標準安全規范
| Standard Safety Specification for Consumer Trampoline Enclosures
|
| ASTM F 2236-2003
| 軟的嬰兒運載工具的消費者安全標準規范
| Standard Consumer Safety Specification for Soft Infant Carriers
|
| ASTM F 2264-2003
| 無動力裝置的小型摩托車的消費者安全標準規范
| Standard Consumer Safety Specification for Non-Powered Scooters
|
| ASTM F 2369-2004
| 非整體火器鎖緊裝置用標準安全規范
| Standard Safety Specification for Non-Integral Firearm Locking Devices
|
| ASTM F 2372-2004
| 購物車的消費者安全標準性能規范
| Standard Consumer Safety Performance Specification for Shopping Carts
|
| ASTM F 2388-2006
| 家用嬰兒可調桌子的消費者標準安全規范
| Standard Consumer Safety Specification for Baby Changing Tables for Domestic Use
|
| ASTM F 2417-2004
| 蠟燭的防火安全標準規范
| Standard Specification for Fire Safety for Candles
|
| ASTM F 2549-2006
| 運送兒童用車架的標準消費者安全規范
| Standard Consumer Safety Specification for Frame Child Carriers
|
| ASTM F 2611-2006
| 鋼絲鏈安全防護欄結構的標準規范
| Standard Guide for Design and Construction of Chain Link Security Fencing
|
| ASTM F 2613-2007
| 兒童折疊椅的消費者安全標準規范
| Standard Consumer Safety Specification for Children's Folding Chairs
|
| ASTM F 381-2006
| 消費者蹦床的部件、組裝、使用和標簽用標準安全規范
| Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
|
| ASTM F 404-2007
| 高腳椅的消費者安全標準規范
| Standard Consumer Safety Specification for High Chairs
|
| ASTM F 406-2007
| 非實際大小的嬰兒床/玩耍場地用消費者安全標準規范
| Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
|
| ASTM F 446-1985
| 浴池區域內安裝的抓桿和輔助裝置的消費者安全標準規范
| Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area
|
| ASTM F 462-1979
| 浴池防滑設施的消費者安全標準規范
| Standard Consumer Safety Specification for Slip-Resistant Bathing Facilities
|
| ASTM F 513-2000
| 水球運動員眼睛和面部防護設備的標準安全規范
| Standard Safety Specification for Eye and Face Protective Equipment for Hockey Players
|
| ASTM F 963-2007
| 玩具安全性用消費者安全標準規范
| Standard Consumer Safety Specification for Toy Safety
|
| ASTM F 966-2000
| 全尺寸和非全尺寸的嬰兒床角柱延伸件的消費者安全規范
| Consumer Safety Specification for Full-Size and Non-Full-Size Baby Crib Corner Post Extensions
|
| IEEE 338-1987
| 核電站安全系統周期試驗的準則
| (Criteria for the periodic surveillance testing of nuclear power generating station safety systems)
|
| IEEE 352-1987
| 核電站安全系統可靠度分析通用原則指南
| (Guide for general principles of reliability analysis of nuclear power generating station safety systems)
|
| IEEE 379-2000
| 核電站安全系統中單一故障標準的應用
| (Application of the single-failure criterion to nuclear power generating station safety systems)
|
| IEEE 577-1976
| 核電站安全系統的設計和運行中的可靠性分析要求
| (Requirements for reliability analysis in the design and operation of safety systems for nuclear power generating stations)
|
| IEEE 603-1998
| 核電站安全系統準則
| (Criteria for safety systems for nuclear power generating stations)
|
| IEEE 627-1980
| 核電站安全系統設備的設計鑒定
| (Design qualification of safety systems equipment used in nuclear power generating stations)
|
| IEEE 692-1997
| 核電站安全系統準則
| (Criteria for security systems for nuclear power generating stations)
|
| IEEE 7-4.3.2-1993
| 核能發電站安全系統中數字計算機的規范要求
| (Criteria for digital computers in safety systems of nuclear power generating stations)
|
| IEEE C 2-2002
| 國家電氣安全規程
| (National electrical safety code)
|
| UL 14B-1998
| 水平安裝白鐵皮包覆防水門用滑動小五金的安全標準
| (Sliding hardware for standard, horizontally mounted tin-clad fire doors )
|
| UL 14C-1999
| 標準白鐵皮包覆防火單門和雙門用轉動小五金的安全標準
| (Swinging hardware for standard tin-clad fire doors mounted singly and in pairs )
|
| UL 22-1999
| 娛樂和賭博機的安全標準
| (Amusement and gaming machines )
|
| 編號 | 中文名稱 | 英文名稱 |
|---|