| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60335-2-52 AMD 1-2008 | 家用和類似用途電器.安全.第2-52部分:口腔衛生電器的特殊要求.修改件1 | Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances; Amendment 1 |
| IEC 60335-2-52 Edition 3.1-2008 | 家用和類似用途電器.安全性.第2-52部分:用于口部的衛生器具的特殊要求 | Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances |
| ISO 10882-1-2001 | 焊接和相關工藝的衛生和安全 操作人員呼吸區域的空氣中懸浮顆粒物及氣體的取樣 第1部分：空氣中懸浮顆粒 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles |
| ISO 10882-2-2000 | 焊接和相關工藝的衛生與安全 工作人員呼吸區域中空氣中懸浮顆粒物及氣體的取樣 第2部分:氣體取樣 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases |
| ISO 11135-1-2007 | 衛生保健品滅菌.環氧乙烷.第1部分:醫療設備消毒過程的制定、確認和常規控制的要求 | Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| ISO 11140-3 Technical Corrigendum 1-2007 | 衛生保健品的滅菌.化學指示劑.第3部分:布維-狄(Bowie and Dick)蒸汽滲透試驗用2號指示劑系統.技術勘誤1 | Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test; Technical Corrigendum 1 |
| ISO 11140-3-2007 | 衛生保健品的滅菌.化學指示劑.第3部分:布維-狄克(Bowie and Dick-type)蒸汽穿透試驗用2級指示劑體系 | Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test |
| ISO 11140-4-2007 | 衛生保健品的滅菌.化學指示劑.第4部分:蒸汽穿透檢測布維-狄(Bowie and Dick)形式試驗的2級指示劑 | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
| ISO 11140-5-2007 | 衛生保健品的滅菌.化學指示劑.第5部分:布維-狄克形式(Bowie and Dick-type)除氣試驗的2級指示劑 | Sterilization of health care products - Chemical indicators - Part 5: Class 2 indicators for Bowie and Dick-type air removal tests |
| ISO 12052-2006 | 醫用信息.包括工作流程和數據管理的醫藥衛生用數字呈像和通信技術 | Health informatics - Digital imaging and communication in medicine (DICOM) including workflow and data management |
| ISO 13408-3-2006 | 衛生保健產品的無菌工藝.第3部分:凍干法 | Aseptic processing of health care products - Part 3: Lyophilization |
| ISO 14159-2002 | 機械安全.機械設計的衛生要求 | Safety of machinery - Hygiene requirements for the design of machinery |
| ISO 14729-2001 | 眼科光學 接觸鏡保護產品 產品的微生物要求及檢驗方法和接觸鏡的衛生管理方法 | Ophthalmic optics - Contact lens care products - Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses |
| ISO 15011-4-2006 | 焊接和相關工藝的衛生和安全.煙塵和氣體取樣的實驗室方法.第4部分:煙塵數據單 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets |
| ISO 15012-2-2008 | 焊接和相關工藝中的衛生和安全.空氣過濾設備的要求、測試和標記.第2部分:采集罩和噴嘴的最小空氣體積流率的 | Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles |
| ISO 15749-1-2004 | 船舶和海上技術.船舶和海上結構物的排水系統.第1部分:衛生排水系統設計 | Ships and marine technology - Drainage systems on ships and marine structures - Part 1: Sanitary drainage-system design |
| ISO 15749-2-2004 | 船舶和海上技術.船舶和海上結構物的排水系統.第2部分:重力系統用衛生排水和排水管道 | Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity systems |
| ISO 15749-3-2004 | 船舶和海上技術.船舶和海上結構物的排水系統.第3部分:真空系統用衛生排水和排水管道 | Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum systems |
| ISO 15749-4-2004 | 船舶和海上技術.船舶和海上結構物的排水系統.第4部分:衛生排水、污水處理管 | Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes |
| ISO 16408-2004 | 牙科學.口腔衛生制品.口腔沖洗 | Dentistry - Oral hygiene products - Oral rinses |
| ISO 16409-2006 | 牙科學.口腔衛生制品.手動牙刷 | Dentistry - Oral hygiene products - Manual interdental brushes |
| ISO 17090-2-2008 | 衛生信息學.公開密鑰基礎設施.第2部分:認證輪廓 | Health informatics - Public key infrastructure - Part 2: Certificate profile |
| ISO 21469-2006 | 機械安全.與附屬產品接觸的潤滑劑.衛生要求 | Safety of machinery - Lubricants with incidental product contact - Hygiene requirements |
| ISO 4067-2-1980 | 建筑和土木工程制圖 設備 第2部分:衛生器材的簡化畫法 | Building and civil engineering drawings; Installations; Part 2 : Simplified representation of sanitary appliances |
| ISO 8086-2004 | 乳品廠.衛生條件.檢驗通用指南和取樣程序 | Dairy plant - Hygiene conditions - General guidance on inspection and sampling procedures |
| ISO/R 784-1968 | 船舶衛生系統安裝圖常用符號 | Conventional signs to be used in schemes for the installations of sanitary systems in ships |
| ISO/TR 13668-1998 | 口腔衛生及護理用數字代碼 | Digital coding of oral health and care |
| ISO/TR 18307-2001 | 衛生信息學 信息交換和通信標準中的互操作性和兼容性 關鍵特性 | Health informatics - Interoperability and compatibility in messaging and communication standards - Key characteristics |
| ISO/TS 11135-2-2008 | 衛生保健品的消毒.環氧乙烷.第2部分:ISO 11135-1應用指南 | Sterilization of health care products - Ethylene oxide - Part 2: Guidance on the application of ISO 11135-1 |
| ISO/TS 15011-5-2006 | 焊接和相關工藝的衛生和安全.煙塵和氣體取樣的實驗室法.第5部分:完全或部分有機材料組成的產品在焊接或切割 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials |
| ISO/TS 19979-2004 | 眼科光學.接觸鏡片.由多位患者試用的接觸鏡片的衛生管理 | Ophthalmic optics - Contact lenses - Hygienic management of multipatient use trial contact lenses |
| IWA 1-2005 | 質量管理體系.衛生服務組織的過程改進指南 | Quality management systems - Guidelines for process improvements in health service organizations |
| 編號 | 中文名稱 | 英文名稱 |