| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| EN 10246-4-1999 | 鋼管的無損檢測 第4部分：橫向缺陷探測用無縫或焊接鐵磁鋼管的（埋弧焊除外）自動全周界磁傳感器檢驗漏磁 | Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections |
| EN 10246-5-1999 | 鋼管的無損檢測 第5部分：徑向缺陷探測用無縫或焊接鐵磁鋼管的（埋弧焊除外）自動全周界磁傳感器檢驗漏磁 | Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for the detection of longitudinal imperfections |
| EN 13160-4-2003 | 檢漏系統 第4部分：泄漏容器或填隙空間中使用的液體和/或蒸汽傳感器系統 | Leak detection systems - Part 4: Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces |
| EN 13160-6-2003 | 檢漏系統 第6部分：監測井的傳感器 | Leak detection systems - Part 6: Sensors in monitoring wells |
| EN 50112-1994 | 測量、控制、調節電溫度傳感器TC組裝用金屬保護管 | Measurement, control, regulation - Electrical temperature sensors - Metal protecting tubes for TC assemblies |
| EN 50113-1994 | 測量、控制、調節電溫度傳感器熱電偶用絕緣管 | Measurement, control, regulation - Electrical temperature sensors - Isolating tubes for thermocouples |
| EN 50123-7-2-2003 | 鐵路設施 固定設備 直流開關裝置 第7-2部分：直流牽引系統專用測量、控制和保護設備 絕緣電流傳感器和 | Railway applications - Fixed installations; D.C. switchgear - Part 7-2: Measurement, control and protection devices for specific use in d.c. traction systems; Isolating current transducers and other current measuring devices |
| EN 50123-7-3-2003 | 鐵路設備 固定設施 直流開關裝置 第7-3部分：直流牽引系統專門使用的測量、控制和保護裝置 絕緣電壓傳 | Railway applications - Fixed installations; D.C. switchgear - Part 7-3: Measurement, control and protection devices for specific use in d.c. traction systems; Isolating voltage transducers and other voltage measuring devices |
| EN 50212-1996 | 熱電傳感器用連接器 | Connectors for thermoelectric sensors |
| EN 50295-1999 | 低壓開關和控制機構 控制器和裝置接口系統 制動器和傳感器接口(AS-i) | Low-voltage switchgear and controlgear - Controller and device interface systems - Actuator Sensor interface (AS-i) |
| EN 60947-5-6-2000 | 低壓開關設備和控制設備規范 第5－6部分：控制電路器件和切換元件 接近傳感器和切換放大器用直流連接器件 | Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR) (IEC 60947-5-6:1999) |
| EN 61010-2-032-2002 | 測量、控制和實驗室用電氣設備的安全要求 第2-032部分：電氣測量和試驗用手持和手操作電流傳感器的特殊要 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement (IEC 61010-2-032:2002) / Note: Endorsem |
| EN 61146-1-1996 | 攝像機(PAL/SECAM/NTSC) 測量方法 第1部分：非廣播單傳感器攝像機 | Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 1: Non-broadcast single-sensor cameras (IEC 61146-1:1994) |
| EN 61146-2-1997 | 攝像機(PAL/SECAM/NTSC) 測量方法 第2部分：兩個和三個傳感器的專業攝影機 | Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 2: Two- and three-sensor professional cameras (IEC 61146-2:1997) |
| EN 61207-2-1994 | 氣體分析器的性能表示 第2部分：氣體中的氧(利用高溫電化學傳感器) | Expression of performance of gas analyzers - Part 2: Oxygen in gas (utilizing high-temperature electrochemical sensors) (IEC 61207-2:1994) |
| EN 61329-1996 | 聲系統設備 測量和規范發聲器性能的方法(發聲用電解傳感器) | Sound system equipment - Methods of measuring and specifying the performance of sounders (electroacoustic transducers for tone production) (IEC 61329:1995) |
| EN 61757-1-1999 | 光纖傳感器 第1部分：通用規范 | Fibre optic sensors - Part 1: Generic specification (IEC 61757-1:1998) |
| EN 61828-2001 | 超聲學 聚焦傳感器 傳輸場的定義和測量方法 | Ultrasonics - Focusing transducers - Definitions and measurement methods for the transmitted fields (IEC 61828:2001) |
| HD 178 S1-1977 | 規定沖擊和振動測量用機電傳感器特性的方法 | Methods for specifying the characteristics of electromechanical transducers for shock and vibration measurements |
| prEN 14277-2001 | 建筑物通風 送氣口 在送氣口/充氣箱中用校正傳感器測量氣流的方法 | Ventilation for buildings - Air terminal devices - Method for airflow measurement by calibrated sensors in ATD/Plenum boxes |
| prEN 61934-1998 | 控制電路裝置和開關元件 鄰近傳感器和開關放大器直流接口 | Draft IEC 61934: Control circuit devices and switching elements - D.c. interface for proximity sensors and switching amplifiers (NAMUR) |
| 編號 | 中文名稱 | 英文名稱 |