| 編號 | 中文名稱 | 英文名稱 |
|---|
| ANSI B11.5-1988
| 機床.鋼鐵制品.制造、維護和使用的安全要求
| Machine Tools - Ironworkers - Safety Requirements for Construction, Care and Use
|
| ANSI LC-1-2005
| 使用波紋不銹鋼管(CSST)的燃?xì)夤艿老到y(tǒng)
| Fuel Gas Piping System Using Corrugated Stainless Steel Tubing (CSST) (same as CSA 6.26)
|
| ANSI/AGA LC-1-1991
| 使用波紋不銹鋼管的室內燃?xì)夤芫€系統
| Interior Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing
|
| ANSI/AGA LC-1a-1993
| 使用波紋不銹鋼管的室內燃?xì)夤芫€系統
| Interior Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing
|
| ANSI/AGA LC-1b-1994
| 使用波紋不銹鋼管的室內燃?xì)夤芫€系統
| Interior Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing
|
| ANSI/ASME A112.19.3M-1987
| 不銹鋼衛生設備(家庭專用型)
| Stainless Steel Plumbing Fixtures (Designed for Residential Use)
|
| ANSI/ASME B36.19M-2004
| 不銹鋼管
| Stainless Steel Pipe
|
| ANSI/ASTM A193/A 193M-2001
| 高溫設備用合金鋼和不銹鋼螺栓材料規范
| Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service
|
| ANSI/ASTM A312/A 312M-2001
| 無縫和焊接奧氏體不銹鋼管規范
| Specification for Seamless and Welded Austenitic Stainless Steel Pipes
|
| ANSI/ASTM A480/A 480M-2001
| 平軋不銹鋼及耐熱鋼板、薄板及帶材一般要求規范
| Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
|
| ANSI/ASTM A688/A 688M-2001
| 奧氏體不銹鋼焊接給水加熱器管規范
| Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
|
| ANSI/ASTM A789/A 789M-2001
| 普通設備用無縫與焊接鐵素體/奧氏體不銹鋼管規范
| Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
|
| ANSI/ASTM A814/A 814M-2001
| 冷加工焊接奧氏體不銹鋼管規范
| Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
|
| ANSI/ASTM A815/A 815M-2001
| 鍛制鐵素體、鐵素體/奧氏體和馬氏體不銹鋼管配件規范
| Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
|
| ANSI/ASTM A908-1996
| 不銹鋼針管規范
| Specification for Stainless Steel Needle Tubing
|
| ANSI/ASTM F2098-2004
| 保證SDR9交聯聚乙烯(PEX)管用金屬插件安全的不銹鋼夾子的試驗方法
| Test Method for Stainless Steel Clamps for Securing SDR9 Cross-Linked Polyethylene (PEX) Tubing to Metal Insert Fittings
|
| ANSI/AWS A4.2M/A 4.2-1997
| 奧氏體和雙奧氏體-鐵素體不銹鋼焊接金屬中δ鐵酸鹽含量測試磁儀器的校準程序
| Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Austenitic-Ferrite Stainless Steel Weld Metal, Procedures for
|
| ANSI/AWS A5.22-2005
| 助溶劑芯弧焊用不銹鋼焊條和鎢電極惰性氣體保護焊用不銹鋼助溶劑芯焊條規范
| Specification for Stainless Steel Electrodes for Flux Cored Arc Welding and Stainless Steel Flux Cored Rods for Gas Tungsten Arc Welding
|
| ANSI/AWS B2.1-1/8-006-2002
| 在焊接條件下、有或沒有墊板、10到18規格的碳鋼與奧氏體不銹鋼(M-1至M-18,或P-8)的氣體保護金屬極電弧焊
| Gas Metal Arc Welding of Carbon Steel to Austentic Stainless Steel (M-1 to M-18, or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
|
| ANSI/AWS B2.1-1/8-010-2002
| 在焊接條件下、有或沒有墊板、10到18規格的碳鋼與奧氏體不銹鋼(M-1至M-18,或P-8)的鎢電極惰性氣體保護焊
| Gas Tungsten Arc Welding of Carbon Steel to Austentic Stainless Steel (M-1 to M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
|
| ANSI/AWS B2.1-1/8-014-2002
| 標準焊接程序規范.在焊接條件下、有或沒有墊板、10到18規格的碳鋼與奧氏體不銹鋼(M-1至M-18,或P-8)的保護金
| Standard Welding Procedure Specification - Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
|
| ANSI/AWS B2.1-1/8-228-2002
| 碳鋼與奧氏體不銹鋼屏蔽金屬電弧焊(從M-1/P-1/S-1,組1或組2焊接到M-8/P-8/S-8, 組1)1/8到1-1/2英寸厚,ER309
| Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, ER309-15, 16 or, 17, As-Welded Condition, Primarily Pipe Applications
|
| ANSI/AWS B2.1-1/8-229-2002
| 碳鋼與奧氏體不銹鋼氣體鎢電弧焊(從M-1/P-1/S-1,組1或組2焊接到M- 8/P-8/S-8, 組1)1/8到1-1/2英寸厚ER30
| Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, ER309 and E309-15, 16, or 17, As-Welded Condition, Primarily Pipe Applications
|
| ANSI/AWS B2.1-1/8-230-2002
| 氣體保護鎢極弧焊的標準焊接程序規范(WPS),可熔嵌入根部的,碳鋼與奧氏體不銹鋼(M-1/P-1/S-1, 組 1 和 2 焊
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Root, of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/16 through 1-1/2 inch thick, IN309 and ER309, As-Welded Condition, Primarily Pipe Applications
|
| ANSI/AWS B2.1-1/8-231-2002
| 帶可熔嵌入焊條的碳鋼與奧氏體不銹鋼氣體保護鎢電弧焊(從M-1/P-1/S-1,組1或組2焊接到M- 8/P-8/S-8, 組1)
| Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Root, Followed by Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, IN309, ER309, and E309-15, 16, or, 17, As-Welded Condition, Primarily Pipe Applications
|
| ANSI/AWS B2.1-8-005-2002
| 在焊接條件下、有或沒有墊板、10到18規格的奧氏體不銹鋼(M-8或P-8)的氣體保護金屬極電弧焊
| Gas Metal Arc Welding of Austentic Stainless Steel (M-8 or P-8) 10 through 18 Gage, in the as-Welded Condition, with or without Backing
|
| ANSI/AWS B2.1-8-009-2002
| 在焊接條件下、有或沒有墊板、10到18規格的不銹鋼(M-8或P-8)的鎢電極惰性氣體保護焊
| Gas Tungsten Arc Welding of Stainless Steel (M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
|
| ANSI/AWS B2.1-8-013-2002
| 標準焊接程序規范.在焊接條件下、有或沒有墊板、10到18規格的奧氏體不銹鋼(M-8/P-8)的保護金屬電弧焊
| Standard Welding Procedure Specification - Shielded Metal Arc Welding of Austenitic - Stainless Steel (M-8/P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
|
| ANSI/AWS B2.1-8-023-2005
| 在焊接條件下1/8到1-1/2英尺厚奧氏體不銹鋼的保護金屬電弧焊的標準焊接程序規范(WPS)(M-8/P-8/S-8,1組)
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, As-Welded Condition
|
| ANSI/AWS B2.1-8-024-2001
| 在焊接條件下、1/8到1-1/2英寸厚的奧氏體不銹鋼(M-8/P-8/S-8,組1)的鎢電極惰性氣體保護焊的焊接程序規范
| (WP Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch thick, As-Welded Condition
|
| ANSI/AWS B2.1-8-025-2001
| 在焊接條件下、保護金屬電弧焊之后的1/8到1-1/2英寸厚的奧氏體不銹鋼(M-8/P-8/S-8,組1)的鎢電極惰性氣體保
| Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, As-Welded Condition
|
| ANSI/AWS B2.1-8-212-2001
| 主要用于管道的、在ERXX焊接條件下、1/8到1-1/2英寸厚的奧氏體不銹鋼(M-8/P-8/S-8,組1)的鎢電極惰性氣體保
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 inch Thick ERXX, As-Welded Condition, Primarily Pipe Applications
|
| ANSI/AWS B2.1-8-213-1997
| 主要用于管道的、在焊接條件下(M-8/P-8/S-8,組)1/8到1-1/2英寸E3XX-XX奧氏體不銹鋼的藥皮焊條電弧焊的標準
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 inch Thick E3XX-XX, As-Welded Condition, Primarily Pipe Applications
|
| ANSI/AWS B2.1-8-214-2001
| 標準焊接程序規范(WPS).主要用于管道的,在焊接條件下、1/8到1-1/2英寸厚ER3XX,E3XX-XX的奧氏體不銹鋼
| (M-8/P Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 Inch Thick ER3XX, E3XX-XX, As-Welded Condition, Primarily Pipe Applications
|
| ANSI/AWS B2.1-8-215-2001
| 在 IN3XX和ER3XX焊接條件下、1/8到1-1/2英寸厚的自耗嵌入式奧氏體不銹鋼(M-8/P-8/S-8,組1)鎢電極惰性氣體保
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 Inch Thick IN3XX and ER3XX, As-Welded Condition
|
| ANSI/AWS B2.1-8-216-2001
| 標準焊接程序規范(WPS).焊接用, 1/8到1-1/2英寸厚IN3XX,ER3XX和E3XX-XX的奧氏體不銹鋼(M-8/P-8/S-8,組1)的
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch Thick IN3XX, ER3XX, and E3XX-XX, As-Welded Condition
|
| ANSI/AWS B2.1.009-1990
| 10至18號有或無背襯焊態條件下不銹鋼(M-8或P-8)鎢極氣弧焊接
| Gas Tungsten Arc Welding of Stainless Steel (M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
|
| ANSI/AWS B2.1.013-1991
| 在焊接條件下、有或沒有墊板、10到18規格(M-8/P-8)奧氏體不銹鋼的藥皮焊條電弧焊的標準焊接程序規范(WPS)
| Standard Welding Procedure Specification - Shielded Metal Arc Welding of Austenitic - Stainless Steel (M-8/P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
|
| ANSI/AWS B2.1.014-1991
| 在焊接條件下、有或沒有墊板、10到18規格(M-1到M-8/P-8)奧氏體不銹鋼的藥皮焊條電弧焊的標準焊接程序規范
| (W Standard Welding Procedure Specification - Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
|
| ANSI/AWS D1.6-1999
| 結構焊接代碼.不銹鋼
| Structural Welding Code - Stainless Steel
|
| ANSI/AWS D10.4-1986
| 焊接奧氏體鉻鎳不銹鋼管推薦慣例
| Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing, Recommended Practices for
|
| ANSI/AWS D18.1-1999
| 衛生潔具用奧氏體不銹鋼管和管道的焊接規范
| Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygenic) Applications
|
| ANSI/AWS D18.2-1999
| 奧氏體不銹鋼管內部焊接褪色度指南
| Guide to Weld Discoloration Levels on Inside of Austenitic Stainless Steel Tube
|
| ANSI/AWWA C220-1998
| 4in(100mm)及以上尺寸的不銹鋼管
| Stainless Steel Pipe 4 in (100 mm) and Larger
|
| ANSI/AWWA C220a-1999
| 不銹鋼管.4英寸.(100 mm) 及更大. ANSI/AWWA C220a-98的附錄
| Stainless Steel Pipe, 4 In. (100 mm) and Larger, Addendum to ANSI/AWWA C220a-98
|
| ANSI/AWWA C223-2002
| 結構鋼和不銹鋼開口套管
| Fabricated Steel and Stainless Steel Tapping Sleeves
|
| ANSI/AWWA C561-2004
| 裝配式不銹鋼推拉門的AWWA標準
| AWWA Standard for Fabricated Stainless Steel Slide Gates
|
| ANSI/NAAMM HMMA866-2001
| 不銹鋼空心金屬門和框架指導性規范
| Guide Specifications for Stainless Steel Hollow Metal Doors and Frames
|
| ANSI/SAE J230-1994
| SAE 30302不銹鋼彈簧絲和彈簧
| Stainless Steel, SAE 30302, Spring Wire and Springs
|
| ANSI/SAE J405-1998
| SAE鍛制不銹鋼的化學成分
| Chemical Compositions of SAE Wrought Stainless Steels
|
| ANSI/UL 6A-2003
| 電器用剛性金屬導管.鋁、青銅及不銹鋼
| Electrical Rigid Metal Conduit - Aluminum, Bronze and Stainless Steel
|
| ASME A112.19.3 Supplement 1-20
| 不銹鋼衛生設備(為住宅使用設計).補充件1
| (Stainless steel plumbing fixtures (designed for residential use); Supplement 1)
|
| ASME A112.3.1-1993
| 在地上/地下,衛生、暴雨和化工用不銹鋼排水系統的安裝程序和性能標準
| (Performance standard and installation procedures for stainless steel drainage systems for sanitary, storm, and chemical applications, above and below ground)
|
| ASME B36.19M-1985
| 不銹鋼管
| (Stainless steel pipe)
|
| ASME BPVC Section 2 Part A-200
| ASME鍋爐和壓力容器規程.第2節:材料.第A部分:鋼鐵材料規范
| (ASME Boiler & Pressure Vessel Code - Section 2: Materials; Part A: Ferrous Material Specifications)
|
| ASTM A 1010-2000
| 高強度馬氏體不銹鋼板、薄板和帶材標準規范
| Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip
|
| ASTM A 1010/A 1010M-2001
| 高強度馬氏體不銹鋼板材、薄板和帶材的標準規范
| Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip
|
| ASTM A 1016/A 1016Ma-2004
| 鐵素體合金鋼管、奧氏體合金鋼管和不銹鋼管一般要求的標準規范
| Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
|
| ASTM A 1021/A 1021M-2005
| 高溫設備用馬氏體不銹鋼鍛件和鍛坯的標準規范
| Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service
|
| ASTM A 153/A 153M-2005
| 鋼鐵制金屬構件上鍍鋅層(熱浸)的標準規范
| Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
|
| ASTM A 167-1999
| 不銹鋼和耐熱鉻鎳鋼板、薄鋼板及帶材的標準規范
| Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
|
| ASTM A 217/A 217M-2004
| 高溫設備承壓部件用合金鋼和馬氏體不銹鋼鑄件標準規范
| Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
|
| ASTM A 240/A 240Mb-2006
| 壓力容器和通用鉻及鉻鎳不銹鋼板、薄板材及帶材標準規范
| Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
|
| ASTM A 262a-2002
| 探測奧氏體不銹鋼晶間腐蝕敏感度的標準實施規范
| Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
|
| ASTM A 263-2003
| 包鉻的不銹鋼板標準規范
| Standard Specification for Stainless Chromium Steel-Clad Plate
|
| ASTM A 268/A 268Ma-2005
| 通用無縫和焊接鐵素體與馬氏體不銹鋼管的標準規范
| Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
|
| ASTM A 269-2004
| 通用無縫和焊接奧氏體不銹鋼管標準規范
| Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
|
| ASTM A 270a-2003
| 衛生設施用無縫和焊接奧氏體不銹鋼管的標準規范
| Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
|
| ASTM A 276-2006
| 不銹鋼鋼棒和型材的標準規范
| Standard Specification for Stainless Steel Bars and Shapes
|
| ASTM A 313/A 313M-2003
| 不銹鋼彈簧絲的標準規范
| Standard Specification for Stainless Steel Spring Wire
|
| ASTM A 320/A 320Ma-2005
| 低溫設備用合金鋼和不銹鋼螺栓材料標準規范
| Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service
|
| ASTM A 356/A 356M-2005
| 汽輪機用厚壁碳素鋼、低合金鋼和不銹鋼鑄件的標準規范
| Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
|
| ASTM A 358/A 358M-2005
| 高溫設備和通用電熔焊奧氏體鉻鎳不銹鋼管標準規范
| Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
|
| ASTM A 368a-1995
| 不銹鋼絲繩的標準規范
| Standard Specification for Stainless Steel Wire Strand
|
| ASTM A 403/A 403M-2006
| 鍛制奧氏體不銹鋼管配件的標準規范
| Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
|
| ASTM A 453/A 453M-2004
| 具有同奧氏體不銹鋼相似的膨脹系數的耐高溫螺栓材料用標準規范
| Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels
|
| ASTM A 473-2001
| 不銹鋼鍛件標準規范
| Standard Specification for Stainless Steel Forgings
|
| ASTM A 478-1997
| 鉻鎳不銹鋼和耐熱鋼制的編織鋼絲的標準規范
| Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
|
| ASTM A 479/A 479Ma-2006
| 鍋爐及其它壓力容器用不銹鋼棒材與型材的標準規范
| Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
|
| ASTM A 492-1995
| 不銹鋼絲繩的標準規范
| Standard Specification for Stainless Steel Rope Wire
|
| ASTM A 493-1995
| 冷鐓和冷鍛不銹鋼鋼絲的標準規范
| Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
|
| ASTM A 511-2004
| 無縫不銹鋼機械管道的標準規范
| Standard Specification for Seamless Stainless Steel Mechanical Tubing
|
| ASTM A 554-2003
| 焊接的不銹鋼機械管用標準規范
| Standard Specification for Welded Stainless Steel Mechanical Tubing
|
| ASTM A 555/A 555M-2005
| 不銹鋼絲和線材一般要求的標準規范
| Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
|
| ASTM A 564/A 564M-2004
| 熱軋和冷精軋時效硬化不銹鋼棒和型材的標準規范
| Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
|
| ASTM A 565/A 565Ma-2005
| 高溫設備用馬氏體不銹鋼棒材的標準規范
| Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
|
| ASTM A 580/A 580M-2006
| 不銹鋼線的標準規范
| Standard Specification for Stainless Steel Wire
|
| ASTM A 581/A 581M-1995
| 高速切削用耐熱不銹鋼絲的標準規范
| Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
|
| ASTM A 581/A 581Mb-1995
| 快削不銹鋼絲和鋼條標準規范
| Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
|
| ASTM A 582/A 582M-2005
| 高速切削不銹鋼棒材的標準規范
| Standard Specification for Free-Machining Stainless Steel Bars
|
| ASTM A 609/A 609M-1991
| 碳素鋼,低合金鋼和馬氏體不銹鋼鑄件及其超聲波檢驗
| Castings, Carbon, Low-Alloy and Martensitic Stainless Steel, Ultrasonic Examination Thereof
|
| ASTM A 632-2004
| 通用無縫和焊接奧氏體不銹鋼管(小直徑)標準規范
| Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
|
| ASTM A 666-2003
| 退火或冷加工的奧氏體不銹鋼薄板、帶材、中厚板和扁棒用標準規范
| Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
|
| ASTM A 688/A 688M-2004
| 焊接的奧氏體不銹鋼給水加熱器管用標準規范
| Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
|
| ASTM A 693-2006
| 沉淀硬化不銹鋼和耐熱鋼板材、薄板和帶材標準規范
| Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
|
| ASTM A 747/A 747M-2004
| 沉淀硬化不銹鋼鑄件的標準規范
| Standard Specification for Steel Castings, Stainless, Precipitation Hardening
|
| ASTM A 763-1993
| 鐵素體不銹鋼晶間腐蝕敏感性檢測的標準操作規程
| Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
|
| ASTM A 774/A 774M-2006
| 低溫和中溫一般腐蝕情況下用的焊接鍛制奧氏體不銹鋼配件標準規范
| Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
|
| ASTM A 778-2001
| 焊接未退火的奧氏體不銹鋼管形制品標準規范
| Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
|
| ASTM A 789/A 789Mb-2005
| 通用無縫和焊接鐵素體/奧氏體不銹鋼管的標準規范
| Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
|
| ASTM A 790/A 790Mb-2005
| 無縫和焊接鐵素體/奧氏體不銹鋼管的標準規范
| Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
|
| ASTM A 793-1996
| 不銹鋼軋制樓板的標準規范
| Standard Specification for Rolled Floor Plate, Stainless Steel
|
| ASTM A 799/A 799M-2004
| 估計鐵素體含量的不銹鋼鑄件儀器校準的標準實施規程
| Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
|
| ASTM A 803/A 803M-2003
| 焊接鐵素體不銹鋼給水加熱器管用標準規范
| Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes
|
| ASTM A 813/A 813M-2001
| 單或雙焊接奧氏體不銹鋼管標準規范
| Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
|
| ASTM A 814/A 814M-2005
| 冷加工焊接奧氏體不銹鋼管的標準規范
| Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
|
| ASTM A 815/A 815M-2004
| 鍛制鐵素體、鐵素體/奧氏體和馬氏體不銹鋼管配件標準規范
| Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
|
| ASTM A 872/A 872M-2005
| 腐蝕環境用離心鑄造鐵素體/奧氏體不銹鋼管的標準規范
| Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
|
| ASTM A 887-1989
| 核能設備用經硼酸處理的不銹鋼板、薄板及帶材
| Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
|
| ASTM A 895-1989
| 易切削不銹鋼板、薄板和帶材
| Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
|
| ASTM A 90/A 90M-2001
| 鍍鋅和鍍鋅合金鋼鐵制品鍍層重量的標準試驗方法
| Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
|
| ASTM A 928/A 928M-2005
| 填充金屬電熔焊鐵素體/奧氏體(二聯)不銹鋼管標準規范
| Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
|
| ASTM A 943/A 943M-2001
| 噴模制無縫奧氏體不銹鋼管的標準規范
| Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
|
| ASTM A 947M-1995
| 構造成的不銹鋼薄板的標準規范
| Standard Specification for Textured Stainless Steel Sheet [Metric]
|
| ASTM A 949/A 949M-2001
| 噴模制無縫鐵素體/奧氏體不銹鋼管的標準規范
| Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
|
| ASTM A 959-2004
| 規定可鍛不銹鋼統一標準等級成分的標準指南
| Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
|
| ASTM A 959c-2004
| 規定可鍛不銹鋼統一標準等級成分的標準指南
| Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
|
| ASTM A 967-2005
| 不銹鋼零件化學鈍化處理的標準規范
| Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
|
| ASTM A 982/A 982M-2005
| 壓縮機和渦輪機翼片用不銹鋼鍛件的標準規范
| Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
|
| ASTM A 988/A 988M-2005
| 高溫設備用熱等靜壓壓制的不銹鋼法蘭、配件、閥門和部件的標準規范
| Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
|
| ASTM A 994-2005
| 鋼、不銹鋼及相關合金產品規范的編輯程序和格式的標準指南
| Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
|
| ASTM A 999/A 999Ma-2004
| 合金鋼及不銹鋼管一般要求的標準規范
| Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
|
| ASTM B 254-1992
| 不銹鋼的制備及電鍍的標準規程
| Standard Practice for Preparation of and Electroplating on Stainless Steel
|
| ASTM B 37-2003
| 鋼鐵制造用鋁的標準規范
| Standard Specification for Aluminum for Use in Iron and Steel Manufacture
|
| ASTM B 633-1998
| 鋼鐵表面的電沉積鋅覆層標準規范
| Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
|
| ASTM B 694-2003
| 電纜護套用銅、銅合金、包銅青銅和包銅不銹鋼薄板和帶材標準規范
| Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
|
| ASTM B 695-2004
| 鋼鐵表面的鋅機械沉積鍍層標準規范
| Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
|
| ASTM B 699-1986
| 鋼鐵表面鎘真空沉積鍍層標準規范
| Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
|
| ASTM B 849-2002
| 鋼鐵預處理減小氫脆變危險的標準規范
| Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
|
| ASTM B 853-2002
| 粉末冶金(P/M)硼不銹鋼構件的標準規范
| Standard Specification for Powder Metallurgy (P/M) Boron Stainless Steel Structural Components
|
| ASTM B 883-2005
| 金屬注模(MIM)鋼鐵材料的標準規范
| Standard Specification for Metal Injection Molding (MIM) Ferrous Materials
|
| ASTM B 895-2005
| 通過浸入氯化鈉溶液評價粉末冶金(P/M)不銹鋼零件/樣品的耐腐蝕性的標準試驗方法 Test
| Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (P/M) Parts/Specimens by Immersion in a Sodium Chloride Solution
|
| ASTM B 912-2002
| 用電拋光法測定不銹鋼鈍化的標準規范
| Standard Specification for Passivation of Stainless Steels Using Electropolishing
|
| ASTM C 795-2003
| 與奧氏體不銹鋼接觸用絕熱材料標準規范
| Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
|
| ASTM C 929-1994
| 奧氏體不銹鋼上用絕熱材料的加工、運輸、海運、貯藏、驗收和應用的標準實施規程
| Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel
|
| ASTM E 1010-1984
| 再溶化法作光譜化學分析用鋼鐵圓盤試樣的制備的標準實施規程
| Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting
|
| ASTM E 1086-1994
| 用點對面激發技術作不銹鋼的光輻射真空光譜測定分析
| Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane Excitation Technique
|
| ASTM E 1806-1996
| 化合物測定鋼鐵標準樣品的標準操作
| Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
|
| ASTM E 353-1993
| 不銹鋼、耐熱鋼、馬氏體鋼和其它類似的鉻鎳鐵合金化學分析的標準試驗方法
| Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
|
| ASTM E 426-1998
| 無縫焊接管形產品、奧氏體不銹鋼的類似合金的電磁(渦電流)檢驗
| Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Austenitic Stainless Steel and Similar Alloys
|
| ASTM E 572a-2002
| 用X射線熒光光譜測定法分析不銹鋼和合金鋼的標準試驗方法
| Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
|
| ASTM F 1314-2001
| 外科植入用鍛制氮增強的22鉻13鎳5錳2.5鉬不銹鋼合金棒和鋼絲(UNS S20910)標準規范
| Standard Specification for Wrought Nitrogen Strengthened 22 Chromium - 13 Nickel - 5 Manganese - 2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)
|
| ASTM F 1325-1991
| 不銹鋼縫合用針托.一般技術要求和通信試驗方法
| Stainless Steel Suture Needle Holders-General Workmanship Requirements and Corresponding Test Methods
|
| ASTM F 1350-2001
| 鍛造18鉻-14鎳-2.5鉬不銹鋼外科固定用線標準規范
| Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673)
|
| ASTM F 138-2003
| 外科植入物用鍛造18鉻-14鎳-2.5鉬不銹鋼棒及鋼絲的標準規范(UNS S31673)
| Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)
|
| ASTM F 139-2003
| 外科植入物用鍛造18鉻-14鎳-2.5鉬不銹鋼薄板及帶材的標準規范(UNS S31673)
| Standard Specification for Wrought 18 Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)
|
| ASTM F 1586-2002
| 外科植入物用鍛制氮加強的21鉻10鎳3錳2.5鉬不銹鋼棒(UNS S31675)標準規范
| Standard Specification for Wrought Nitrogen Strengthened 21 Chromium - 10 Nickel - 3 Manganese - 2.5 Molybdenum Stainless Steel Bar for Surgical Implants (UNS S31675)
|
| ASTM F 1744-1996
| 不銹鋼外科器械保養與維護標準導則
| Standard Guide for Care and Handling of Stainless Steel Surgical Instruments
|
| ASTM F 2098-2004
| 保證SDR9交聯聚乙烯(PEX)管用金屬插件安全的不銹鋼夾子的標準規范
| Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings
|
| ASTM F 2181a-2002
| 外科植入物用鍛造的無縫不銹鋼管的標準規范
| Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants
|
| ASTM F 2229-2002
| 外科植入物用氮加強的23錳21鉻1鉬低鎳不銹鋼鍛造合金棒材和線材的標準規范
| Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)
|
| ASTM F 2257-2003
| 外科植入物用鍛造無縫或焊接和拉拔18鉻-14鎳-2.5鉬不銹鋼小直徑管的標準規范(UNS S31673)
| Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)
|
| ASTM F 2281-2004
| 耐熱及高溫設備用不銹鋼和鎳合金螺栓、六角頭螺釘和螺柱的標準規范
| Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
|
| ASTM F 593-2002
| 不銹鋼螺栓,六角頭螺釘及螺柱標準規范
| Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
|
| ASTM F 594-2002
| 不銹鋼螺母標準規范
| Standard Specification for Stainless Steel Nuts
|
| ASTM F 621-1997
| 外科植入用不銹鋼鍛件的標準規范
| Standard Specification for Stainless Steel Forgings for Surgical Implants
|
| ASTM F 738M-2002
| 不銹鋼米制螺栓、螺釘及螺柱(米制)的標準規范
| Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs
|
| ASTM F 745-2000
| 鑄造和固溶退火外科植入物用18鉻12.5鎳2.5鉬不銹鋼的標準規范
| Standard Specification for 18 Chromium-12.5 Nickel-2.5 Molybdenum Stainless Steel for Cast and Solution-Annealed Surgical Implant Applications
|
| ASTM F 836M-2002
| 1型不銹鋼米制螺母標準規范
| Standard Specification for Style 1 Stainless Steel Metric Nuts
|
| ASTM F 837Ma-2002
| 不銹鋼凹頭螺釘螺絲的標準規范(米制)
| Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]
|
| ASTM F 837a-2002
| 不銹鋼凹頭螺釘螺絲的標準規范
| Standard Specification for Stainless Steel Socket Head Cap Screws
|
| ASTM F 879Ma-2002
| 不銹鋼圓頭及扁平沉頭六角螺釘?shù)臉?biāo)準規范(米制)
| Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]
|
| ASTM F 879a-2002
| 不銹鋼圓頭及扁平沉頭六角螺釘?shù)臉?biāo)準規范
| Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
|
| ASTM F 880-2002
| 不銹鋼凹頭定位螺釘標準規范
| Standard Specification for Stainless Steel Socket-Set Screws
|
| ASTM F 880M-2002
| 不銹鋼凹頭定位螺釘(米制)標準規范
| Standard Specification for Stainless Steel Socket Set Screws [Metric]
|
| ASTM F 899-1995
| 外科器械用的不銹鋼錠,棒材和絲材
| Standard Specification for Stainless Steel Billet, Bar, and Wire for Surgical Instruments
|
| ASTM G 108-1994
| 檢測AISI304和304L型不銹鋼增感作用的電化學再活化性(EPR)的測試方法
| Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
|
| ASTM G 123-2000
| 沸騰酸化氯化鈉溶液中不同鎳合量不銹鋼合金應力腐蝕裂紋評定的標準試驗方法
| Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
|
| ASTM G 35-1998
| 不銹鋼及有關鎳鉻鐵合金在連多硫酸中應力腐蝕斷裂靈敏性測定的標準實施規程
| Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids
|
| ASTM G 48-2003
| 用氯化鐵溶液測定不銹鋼及有關合金耐點腐蝕和縫隙腐蝕的標準試驗方法
| Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
|
| UL 6A-2000
| 硬金屬導管.鋁、青銅和不銹鋼
| (Rigid metal conduit - Aluminium, bronze and stainless steel )
|
| 編號 | 中文名稱 | 英文名稱 |
|---|