| 編號 | 中文名稱 | 英文名稱 |
|---|
| GB/T 229-1994
| 金屬夏比缺口沖擊試驗方法
| Metallic materials-Charpy notch impact test
|
| DL/T 768.7-2002
| 電力金具制造質量 鋼鐵件熱鍍鋅層
| ()
|
| GB 13456-1992
| 鋼鐵工業水污染物排放標準
| Discharge standard of water pollutants for iron and steel industry
|
| GB 16487.6-2005
| 進口可用作原料的固體廢物環境保護控制標準廢鋼鐵
| Environmental protection control standard for imported solid wastes as raw materials -- Waste and scrap of iron and steel
|
| GB 17567-1998
| 核設施的鋼鐵和鋁再循環再利用的清潔解控水平
| Clearance levels for recycle and reuse of steel and aluminium from nuclear facilities
|
| GB 4223-2004
| 廢鋼鐵
| Iron and steel scraps
|
| GB/T 11261-2006
| 鋼鐵氧含量的測定脈沖加熱惰氣熔融-紅外線吸收法
| Steel and ironDetermination of oxygen content The pulse heating inert gas fusion-infra-red absorption method
|
| GB/T 11354-2005
| 鋼鐵零件滲氮層深度測定和金相組織檢驗
| Determination of nitrided case depth and metallographic microstructure examination for steeliron parts
|
| GB/T 13346-1992
| 金屬覆蓋層鋼鐵上的鎘電鍍層
| Metallic coatings--Electroplated coatingsof cadmium on iron and steel
|
| GB/T 13452.4-1992
| 色漆和清漆鋼鐵表面上的絲狀腐蝕試驗
| Paints and varnishes--Filiform corrosion test on steel
|
| GB/T 13912-2002
| 金屬覆蓋層鋼鐵制件熱浸鍍鋅層技術要求及試驗方法
| Metallic coatings--Hot dip galvanized coatings on fabricated iron and steel articles--Specifications and test methods
|
| GB/T 14203-1993
| 鋼鐵及合金光電發射光譜分析法通則
| General rule for photoelectric emission spectroscopic analysis of iron，steel and alloy
|
| GB/T 15519-2002
| 化學轉化膜鋼鐵黑色氧化膜規范和試驗方法
| Chemical conversion coatings--Black oxide coating on iron and steel--Specification and test methods
|
| GB/T 17616-1998
| 鋼鐵及合金牌號統一數字代號體系
| Unified numbering system for designations of iron，steel and alloy
|
| GB/T 18592-2001
| 金屬覆蓋層鋼鐵制品熱浸鍍鋁技術條件
| Metallic coating--Hot dipped aluminium coatings on ferrous articles--Specification
|
| GB/T 18683-2002
| 鋼鐵件激光表面淬火
| Laser surface hardening of iron and steel parts
|
| GB/T 18916.2-2002
| 取水定額第2部分:鋼鐵聯合企業
| Norm of water intake--Part 2:Iron and steel complex
|
| GB/T 19349-2003
| 金屬和其他無機覆蓋層為減少氫脆危險的鋼鐵預處理
| Metallic and other inorganic coatings--Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
|
| GB/T 19350-2003
| 金屬和其他無機覆蓋層為減少氫脆危險的涂覆后鋼鐵的處理
| Metallic and other inorganic coatings--Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement
|
| GB/T 19355-2003
| 鋼鐵結構耐腐蝕防護鋅和鋁覆蓋層指南
| Protection against corrosion ofiron and steel in structures--Zinc and aluminum coatings--Guidelines
|
| GB/T 20123-2006
| 鋼鐵總碳硫含量的測定高頻感應爐燃燒后紅外吸收法（常規方法）
| Steel and iron -- Determination of total carbon and sulfur content -- Infrared absorption method after combustion in an induction furnace (routine method)
|
| GB/T 20124-2006
| 鋼鐵氮含量的測定惰性氣體熔融熱導法（常規方法）
| Steel and iron -- Determination of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas (Routine method)
|
| GB/T 20127.1-2006
| 鋼鐵及合金痕量元素的測定第1部分：石墨爐原子吸收光譜法測定銀含量
| Steel and alloy - Determination of trace element contents Part 1: Determination of silver content by graphite furnace atomic absorption spectrometric method
|
| GB/T 20127.10-2006
| 鋼鐵及合金痕量元素的測定第10部分：氫化物發生-原子熒光光譜法測定硒含量
| Steel and alloy - Determination of trace element contents Part 10: Determination of selenium content by hydride generation-atomic fluorescence spectrometric method
|
| GB/T 20127.11-2006
| 鋼鐵及合金痕量元素的測定第11部分：電感耦合等離子體質譜法測定銦和鉈含量
| Steel and alloy - Determination of trace element contents Part 11: Determination of indium and thallium content by inductively coupled plasma-mass spectrometric method
|
| GB/T 20127.12-2006
| 鋼鐵及合金痕量元素的測定第12部分：火焰原子吸收光譜法測定鋅含量
| Steel and alloy - Determination of trace element contents Part 12: Determination of zinc content by flame atomic absorption spectrometric method
|
| GB/T 20127.13-2006
| 鋼鐵及合金痕量元素的測定第13部分：碘化物萃取-苯基熒光酮光度法測定錫含量
| Steel and alloy - Determination of trace element contents Part 13: Determination of tin content by iodide extraction-phenylfluorone photometric method
|
| GB/T 20127.2-2006
| 鋼鐵及合金痕量元素的測定第2部分：氫化物發生-原子熒光光譜法測定砷含量
| Steel and alloy - Determination of trace element contents Part2: Determination of arsenic content by hydride generation-atomic fluorescence spectrometric method
|
| GB/T 20127.3-2006
| 鋼鐵及合金痕量元素的測定第3部分：電感耦合等離子體發射光譜法測定鈣、鎂和鋇含量
| Steel and alloy - Determination of trace element contents Part3:Determination of calcium,magnesium,barium content by inductively coupled plasma atomic emission spectrometric method
|
| GB/T 20127.4-2006
| 鋼鐵及合金痕量元素的測定第4部分：石墨爐原子吸收光譜法測定銅含量
| Steel and alloy - Determination of trace element contents Part 4: Determination of copper content by graphite furnace atomic absorption spectrometric method
|
| GB/T 20127.5-2006
| 鋼鐵及合金痕量元素的測定第5部分：萃取分離-羅丹明B光度法測定鎵含量
| Steel and alloy - Determination of trace element contents Part 5: Determination of gallium content by extraction separation-rhodamine B photometric method
|
| GB/T 20127.6-2006
| 鋼鐵及合金痕量元素的測定第6部分：沒食子酸-示波極譜法測定鍺含量
| Steel and alloy - Determination of trace element contents Part 6: Determination of germanium content by gallic acid oscillopolarographic method
|
| GB/T 20127.7-2006
| 鋼鐵及合金痕量元素的測定第7部分：示波極譜法測定鉛含量
| Steel and alloy - Determination of trace element contents Part 7: Determination of lead content by oscillopolarographic method
|
| GB/T 20127.8-2006
| 鋼鐵及合金痕量元素的測定第8部分：氫化物發生-原子熒光光譜法測定銻含量
| Steel and alloy - Determination of trace element contents Part 8: Determination of antimony content by hydride generation-atomic fluorescence spectrometric method
|
| GB/T 20127.9-2006
| 鋼鐵及合金痕量元素的測定第9部分：電感耦合等離子體發射光譜法測定鈧含量
| Steel and alloy - Determination of trace element contents Part 9: Determination of scandium content by inductively coupled plasma atomic emission spectrometric method
|
| GB/T 221-2000
| 鋼鐵產品牌號表示方法
| Notations for designations of iron and steel
|
| GB/T 223.10-2000
| 鋼鐵及合金化學分析方法銅鐵試劑分離-鉻天青S光度法測定鋁含量
| Methods for chemical analysis of iron，steel and alloy--The cupferron separation-chrome azurol S photometric method for the determination of aluminium content
|
| GB/T 223.11-1991
| 鋼鐵及合金化學分析方法過硫酸銨氧化容量法測定鉻量
| Methods for chemical analysis of iron，steel and alloy--The ammonium persulfate oxidation volumetric method for the determination of chromium content
|
| GB/T 223.12-1991
| 鋼鐵及合金化學分析方法碳酸鈉分離-二苯碳酰二肼光度法測定鉻量
| Methodsfor chemical analysis of iron，steel and alloy--The sodium carbonate separation-diphenyl carbazide photometric method for the determination of chromium content
|
| GB/T 223.13-2000
| 鋼鐵及合金化學分析方法硫酸亞鐵銨滴定法測定釩含量
| Methods for chemical analysis of iron，steel and alloy--The ammonium ferrous sulfate titrationmethod for the determination of vanadium content
|
| GB/T 223.14-2000
| 鋼鐵及合金化學分析方法鉭試劑萃取光度法測定釩含量
| Methods for chemical analysis of iron，steel and alloy--The N-benzoy-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content
|
| GB/T 223.16-1991
| 鋼鐵及合金化學分析方法變色酸光度法測定鈦量
| Methods for chemical analysis of iron，steel and alloy--The chromotropic acid photometric method for the determination of titanium content
|
| GB/T 223.17-1989
| 鋼鐵及合金化學分析方法二安替比林甲烷光度法測定鈦量
| Methods for chemical analysis of iron，steel and alloy--The diantipyryl methane photometric method for the determination of titanium content
|
| GB/T 223.18-1994
| 鋼鐵及合金化學分析方法硫代硫酸鈉分離-碘量法測定銅量
| Methods for chemical analysis of iron，steel and alloy--The sodium thiosulfate separation iodimetric method for the determination of copper content
|
| GB/T 223.19-1989
| 鋼鐵及合金化學分析方法新亞銅靈-三氯甲烷萃取光度法測定銅量
| Methods for chemical analysis of iron，steel and alloy--The neocuproine-chloroform extraction photometric method for the determination of copper content
|
| GB/T 223.20-1994
| 鋼鐵及合金化學分析方法電位滴定法測定鈷量
| Methods for chemical analysis of iron，steel and alloy--The fotentiometric titration method for the determination of cobalt content
|
| GB/T 223.21-1994
| 鋼鐵及合金化學分析方法5-Cl-PADAB分光光度法測定鈷量
| Methods for chemical analysis of iron，steel and alloy--The 5-Cl-PADAB spectrophotometricmethod for the determination of cobalt content
|
| GB/T 223.22-1994
| 鋼鐵及合金化學分析方法亞硝基R 鹽分光光度法測定鈷量
| Methods for chemical analysis of iron，steel and alloy--The nitroso-R-salt spectrophotometric method for the determination of cobalt content
|
| GB/T 223.23-1994
| 鋼鐵及合金化學分析方法丁二酮肟分光光度法測定鎳量
| Methods for chemical analysis of iron，steel and alloy--The dimethylglyoxime spectrophotometricmethod for the determination of nickel content
|
| GB/T 223.24-1994
| 鋼鐵及合金化學分析方法萃取分離-丁二酮肟分光光度法測定鎳量
| Methods for chemical analysis of iron，steel and alloy--The extraction separation--The dimethylglyoxime spectrophotometric method for the determination of nickel content
|
| GB/T 223.25-1994
| 鋼鐵及合金化學分析方法丁二酮肟重量法測定鎳量
| Methods for chemical analysis of iron，steel and alloy--The dimethylglyoxime gravimetric method forthe determination of nickel content
|
| GB/T 223.26-1989
| 鋼鐵及合金化學分析方法硫氰酸鹽直接光度法測定鉬量
| Methods for chemical analysis of iron，steel and alloy--The thiocyanate direct photometric method for the determination of molybdenum content
|
| GB/T 223.27-1994
| 鋼鐵及合金化學分析方法硫氰酸鹽-乙酸丁酯萃取分光光度法測定鉬量
| Methods for chemical analysis of iron，steel and alloy--The thiocyanate-butyl acetate extraction spectrophotometric method for the determination of molybdenum content
|
| GB/T 223.28-1989
| 鋼鐵及合金化學分析方法α-安息香肟重量法測定鉬量
| Methods for chemical analysis of iron，steel and alloy--The α-benzoinoxime gravimetric method for the determination of molybdenum content
|
| GB/T 223.29-1984
| 鋼鐵及合金化學分析方法 載體沉淀-二甲酚橙光度法測定鉛量
| Methods for chemical analysis of iron，steel and alloy--The xylenol orange photometric method for determination of lead content after carrier precipit-ation
|
| GB/T 223.3-1988
| 鋼鐵及合金化學分析方法二安替比林甲烷磷鉬酸重量法測定磷量
| Methods forchemical analysis of iron，steel and alloy--The diantipyryl methane phosphomolybdate gravimetric method for the determination of phosphorus content
|
| GB/T 223.30-1994
| 鋼鐵及合金化學分析方法對-溴苦杏仁酸沉淀分離-偶氮胂Ⅲ分光光度法測定鋯量
| Methods for chemical analysis of iron，steel and alloy--The arsenazo Ⅲspectrophotometric method for the determination of zirconium content after separation by p-bromomandelic acid
|
| GB/T 223.31-1994
| 鋼鐵及合金化學分析方法蒸餾分離-鉬藍分光光度法測定砷量
| Methods for chemical analysis of iron，steel and alloy--The distillation-molybdenum bluespectrophotometric method for the determination of arsenic content
|
| GB/T 223.32-1994
| 鋼鐵及合金化學分析方法次磷酸鈉還原-碘量法測定砷量
| Methods for chemical analysis of iron，steel and alloy--The hypophosphite reduction-iodimetric method for the determination of arsenic content
|
| GB/T 223.33-1994
| 鋼鐵及合金化學分析方法萃取分離-偶氮氯膦mA光度法測定鈰量
| Methods forchemical analysis of iron，steel and alloy--The chlorophosphonago mA photometric method for the determination of cerium content after extraction separation
|
| GB/T 223.34-2000
| 鋼鐵及合金化學分析方法鐵粉中鹽酸不溶物的測定
| Methods for chemical analysis of iron，steel and alloy--The determination of hydrochloric acid-insoluble content of iron powders
|
| GB/T 223.36-1994
| 鋼鐵及合金化學分析方法蒸餾分離-中和滴定法測定氮量
| Methods for chemical analysis of iron，steel and alloy--The neutral titration method for the determination of nitrogen content after distillation separation
|
| GB/T 223.37-1989
| 鋼鐵及合金化學分析方法蒸餾分離-靛酚藍光度法測定氮量
| Methods for chemical analysis of iron，steel and alloy--The indophenol blue photometric method for the determination of nitrogen content after distillation separation
|
| GB/T 223.38-1985
| 鋼鐵及合金化學分析方法離子交換分離-重量法測定鈮量
| Methods for chemical analysis of iron，steel and alloy--The anion-exchange separation-gravimetric method for the determination of niobium content
|
| GB/T 223.4-1988
| 鋼鐵及合金化學分析方法硝酸銨氧化容量法測定錳量
| Methods for chemical analysis of iron，steel and alloy--The volumetric method for determination of manganese content by ammonium nitrate oxidation
|
| GB/T 223.41-1985
| 鋼鐵及合金化學分析方法離子交換分離-連苯三酚光度法測定鉭量
| Methods for chemical analysis of iron，steel and alloy--The anion-exchange separation-pyrogallol photometric method for the determination of tantalum content
|
| GB/T 223.42-1985
| 鋼鐵及合金化學分析方法離子交換分離-溴鄰苯三酚紅光度法測定鉭量
| Methods for chemical analysis of iron，steel and alloy--The anion-exchange separation-bromopyrogallol red photometric method for the determination of tantalumcontent
|
| GB/T 223.43-1994
| 鋼鐵及合金化學分析方法鎢量的測定
| Methods for chemical analysis of iron，steel and alloy--Determination of tungsten content
|
| GB/T 223.46-1989
| 鋼鐵及合金化學分析方法火焰原子吸收光譜法測定鎂量
| Methods for chemical analysis of iron，steel and alloy--The flame atomic absorption spectrometric method for the determination of magnesium content
|
| GB/T 223.47-1994
| 鋼鐵及合金化學分析方法載體沉淀-鉬藍光度法測定銻量
| Methods for chemical analysis of iron，steel and alloy--The carrier precipitation-molybdenumblue potometric method for the determination of antimony content
|
| GB/T 223.48-1985
| 鋼鐵及合金化學分析方法半二甲酚橙光度法測定鉍量
| Methods for chemical analysis of iron，steel and alloy--The semixylenol orange photometric method for the determination of bismuth content
|
| GB/T 223.49-1994
| 鋼鐵及合金化學分析方法萃取分離-偶氮氯膦mA分光光度法測定稀土總量
| Methods for chemical analysis of iron，steel and alloy--Extraction separation-chlorophosphonazo mA spectro-photometric method for the determination of the total rare earth content
|
| GB/T 223.5-1997
| 鋼鐵及合金化學分析方法還原型硅鉬酸鹽光度法測定酸溶硅含量
| Methods forchemical analysis of iron，steel and alloy--The reduced molybdosilicate spectro-photometric method for the determination of acid-soluble silicon content
|
| GB/T 223.50-1994
| 鋼鐵及合金化學分析方法苯基熒光酮-溴化十六烷基三甲基胺直接光度法測定錫量
| Methods for chemical analysis of iron，steel and alloy--The phenylfluorone-CTMAB direct photometric method for the determination of tin content
|
| GB/T 223.51-1987
| 鋼鐵及合金化學分析方法 5-Br-PADAP 光度法測定鋅量
| Methods for chemical analysis of iron，steel and alloy--The 2-(5-Bromo-2-pyridylazo)-5-diethylaminophenol photometric method for the determination of zinc content
|
| GB/T 223.52-1987
| 鋼鐵及合金化學分析方法鹽酸羥胺-碘量法測定硒量
| Methods for chemical analysis of iron，steel and alloy--The hydroxylamine hydrochloride-iodometric method for the determination of selenium content
|
| GB/T 223.53-1987
| 鋼鐵及合金化學分析方法火焰原子吸收分光光度法測定銅量
| Methods for chemical analysis of iron，steel and alloy--The flame atomic absorption spectrophotometric method for the determination of copper content
|
| GB/T 223.54-1987
| 鋼鐵及合金化學分析方法火焰原子吸收分光光度法測定鎳量
| Methods for chemical analysis of iron，steel and alloy--The flame atomic absorption spectrophotometric method for the determination of nickel content
|
| GB/T 223.55-1987
| 鋼鐵及合金化學分析方法示波極譜( 直接 )法測定碲量
| Methods for chemical analysis of iron，steel and alloy--The direct oscillopolarographic method for the determination of tellerium content
|
| GB/T 223.56-1987
| 鋼鐵及合金化學分析方法巰基棉分離-示波極譜法測定碲量
| Methods for chemical analysis of iron，steel and alloy--The sulfhydryl cotton fiber separation-oscillopolarographic method for the determination of tellurium content
|
| GB/T 223.57-1987
| 鋼鐵及合金化學分析方法 萃取分離-吸附催化極譜法測定鎘量
| Methods for chemical analysis of iron，steel and alloy--The extraction-absorption catalytic polarographic method for the determination of cadmium content
|
| GB/T 223.58-1987
| 鋼鐵及合金化學分析方法 亞砷酸鈉-亞硝酸鈉滴定法測定錳量
| Methods for chemical analysis of iron，steel and alloy--The extraction-absorption catalytic polarographic method for the determination of manganese content
|
| GB/T 223.59-1987
| 鋼鐵及合金化學分析方法銻磷鉬藍光度法測定磷量
| Methods for chemical analysis of iron，steel and alloy--The sodium arsenite-sodium nitrite titrimetric method for the determination of phosphorus content
|
| GB/T 223.6-1994
| 鋼鐵及合金化學分析方法中和滴定法測定硼量
| Methods for chemical analysis of iron，steel and alloy--The neutralization titrimetric method for the determination of boron content
|
| GB/T 223.60-1997
| 鋼鐵及合金化學分析方法高氯酸脫水重量法測定硅含量
| Methods for chemical analysis of iron，steel and alloy--The perchloric acid dehydration gravimetric method for the determination of silicon content
|
| GB/T 223.61-1988
| 鋼鐵及合金化學分析方法磷鉬酸銨容量法測定磷量
| Methods for chemical analysis of iron，steel and alloy--The ammonium phosphomolybdate volumetric method for the determination of phosphorus content
|
| GB/T 223.62-1988
| 鋼鐵及合金化學分析方法乙酸丁酯萃取光度法測定磷量
| Methods for chemical analysis of iron，steel and alloy--The butyl acetate extraction photometric method for the determination of phosphorus content
|
| GB/T 223.63-1988
| 鋼鐵及合金化學分析方法高碘酸鈉(鉀)光度法測定錳量
| Methods for chemical analysis of iron，steel and alloy--The sodium (potassium) periodate photometric method for the determination of manganese content
|
| GB/T 223.64-1988
| 鋼鐵及合金化學分析方法火焰原子吸收光譜法測定錳量
| Methods for chemical analysis of iron，steel and alloy--The flame atomic absorption spectrometric method for the determination of manganese content
|
| GB/T 223.65-1988
| 鋼鐵及合金化學分析方法火焰原子吸收光譜法測定鈷量
| Methods for chemical analysis of iron，steel and alloy--The flame atomic absorption spectrometric method for the determination of cobalt content
|
| GB/T 223.66-1989
| 鋼鐵及合金化學分析方法硫氰酸鹽-鹽酸氯丙嗪-三氯甲烷萃取光度法測定鎢量
| Methods for chemical analysis of iron，steel and alloy--The thiocyanate chlorpromazine hydrochloride--chloro form extraction photometric method for the determination of tungsten content
|
| GB/T 223.67-1989
| 鋼鐵及合金化學分析方法還原蒸餾-次甲基藍光度法測定硫量
| Methods for chemical analysis of iron，steel and alloy--The reducing distillation-methylene blue photometric method for the determination of sulfur content
|
| GB/T 223.68-1997
| 鋼鐵及合金化學分析方法管式爐內燃燒后碘酸鉀滴定法測定硫含量
| Methods for chemical analysis of iron，steel and alloy--The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content
|
| GB/T 223.69-1997
| 鋼鐵及合金化學分析方法 管式爐內燃燒后氣體容量法測定碳含量
| Methods for chemical analysis of iron，steel and alloy--The gas-volumetric method after combustion in the pipe furnace for the determination of carbon content
|
| GB/T 223.70-1989
| 鋼鐵及合金化學分析方法鄰菲啰啉分光光度法測定鐵量
| Methods for chemical analysis of iron，steel and alloy--The o-phenanthroline spectrophotometric method for the determination of iron content
|
| GB/T 223.71-1997
| 鋼鐵及合金化學分析方法 管式爐內燃燒后重量法測定碳含量
| Methods for chemical analysis of iron，steel and alloy--The gravimetric method after combustion in the pipe furnace for the determination of carbon content
|
| GB/T 223.72-1991
| 鋼鐵及合金化學分析方法氧化鋁色層分離-硫酸鋇重量法測定硫量
| Methods for chemical analysis of iron，steel and alloy--The alumina chromatographic separation-bar-ium sulfate gravimetric method for the determination of sulphur content
|
| GB/T 223.73-1991
| 鋼鐵及合金化學分析方法三氯化鈦-重鉻酸鉀容量法測定鐵量
| Methods for chemical analysis of iron，steel and alloy--The titanium trichloride-potassium dichromate volumetric method for the determination of iron content
|
| GB/T 223.74-1997
| 鋼鐵及合金化學分析方法非化合碳含量的測定
| Methods for chemical analysis of iron，steel and alloy--The combustion gravimetric/gas-volumetric method for the determination of non-combined carbon content
|
| GB/T 223.75-1991
| 鋼鐵及合金化學分析方法甲醇蒸餾-姜黃素光度法測定硼量
| Methods for chemical analysis of iron，steel and alloy--The methanol distillation-curcuminphotometric method for the determination of boron content
|
| GB/T 223.76-1994
| 鋼鐵及合金化學分析方法火焰原子吸收光譜法測定釩量
| Methods for chemical analysis of iron，steel and alloy--The flame atomic absorption spectrometric method for the determination of vanadium content
|
| GB/T 223.77-1994
| 鋼鐵及合金化學分析方法火焰原子吸收光譜法測定鈣量
| Methods for chemical analysis of iron，steel and alloy--The flame atomic absorption spectrometric method for the determination of calcium content
|
| GB/T 223.78-2000
| 鋼鐵及合金化學分析方法姜黃素直接光度法測定硼含量
| Methods for chemical analysis of iron，steel and alloy--Curcumin spectrophotometric method for the determination of boron content
|
| GB/T 223.8-2000
| 鋼鐵及合金化學分析方法氟化鈉分離-EDTA滴定法測定鋁含量
| Methods for chemical analysis of iron，steel and alloy--The sodium fluoride separation--EDTA titration method for the determination of aluminium content
|
| GB/T 223.9-2000
| 鋼鐵及合金化學分析方法鉻天青S光度法測定鋁含量
| Methods for chemical analysis of iron，steel and alloy--The chrome azurol S photometric methodfor the determination of aluminium content
|
| GB/T 6807-2001
| 鋼鐵工件涂裝前磷化處理技術條件
| Specifications for phosphating treatment of iron and steel parts before painting
|
| GB/T 9799-1997
| 金屬覆蓋層鋼鐵上的鋅電鍍層
| Metallic coatings--Electroplated coatingsof zinc on iron or steel
|
| JB/T 10174-2000
| 鋼鐵零件強化噴丸的質量檢驗方法
| ()
|
| JB/T 5067-1999
| 鋼鐵制件粉末滲鋅
| ()
|
| JB/T 8928-1999
| 鋼鐵制件機械鍍鋅
| ()
|
| JB/T 9200-1999
| 鋼鐵件的火焰淬火回火處理
| ()
|
| JB/T 9206-1999
| 鋼鐵熱浸鋁工藝及質量檢驗
| ()
|
| YB/T 804-1995
| 鋼鐵渣處理及利用技術術語
| ()
|
| YBJ 64-1991
| 鋼鐵企業電信設計圖形符號
| ()
|
| 編號 | 中文名稱 | 英文名稱 |
|---|