| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| XP D36-112-2000 | 家政學.使用汽缸或單個油箱里的丁烷或丙烷的家庭裝置外部連接用(增強)撓性橡膠管 | (Household economy - (Reinforced) flexible rubber tubing for the external connection of domestic appliances using butane or propane from cylinders or individual tanks.) |
| NF R15-703-2-1996 | 道路車輛.罩型點火塞及汽缸蓋上的座孔尺寸.第2部分:M12×1.25熱線點火塞 | (Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. Part 2 : M12 X 1,25 glow-plugs.) |
| NF P26-414-1995 | 建筑用五金.“CHUBB“型或帶有汽缸的簡單150號配有安全鎖的立式插鎖 | (Building hardware. Simple 150 vertical mortice fitted safety locks, type “chubb“ or with cylinders.) |
| NF R15-703-1-1996 | 道路車輛.罩型點火塞及汽缸蓋上的座孔尺寸.第1部分:M14×1.25熱線點火塞 | (Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. Part 1 : M14 X 1,25 glow-plugs.) |
| NF R11-002-1978 | 內燃機.汽缸的數字標志 | (INTERNAL COMBUSTION ENGINES. CYLINDER NUMBERING.) |
| NF R12-622-1987 | 道路車輛.安裝在底座上的,單汽缸三角皮帶傳動的空氣壓縮機.安裝尺寸 | (ROAD VEHICLES. BASE-MOUNTED AIR COMPRESSORS,SINGLE CYLINDER V-BELT DRIVE. MOUNTING DIMENSIONS.) |
| NF R13-318-2002 | 道路車輛.帶平座和16mm六角M14×1.25火花塞及其在汽缸蓋上的座孔 | (Road vehicles - M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings.) |
| NF E48-361-1992 | 液壓傳動.變量或定量汽缸發動機.控制規范 | (HYDRAULIC FLUID POWER. FIXED AND VARIABLE DISPLACEMENT MOTORS. SPECIFICATION WITH ODER.) |
| NF E48-354-1989 | 液壓傳動.容積泵和容積汽缸功率的測定 | (HYDRAULIC FLUID POWER. POSITIVE DISPLACEMENT PUMPS AND MOTORS.) |
| ANSI B93.3-1984 | 汽缸孔和活塞桿直徑.英制系列 | Cylinder Bore and Piston Rod Diameters - Inch Series |
| ANSI/ASTM D5001-2004 | 用汽缸上球式(BOCLE)潤滑性評定儀測量航空渦輪機燃料潤滑性的試驗方法 | Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (Bocle) (05.03) |
| ANSI/ASAE S201.4-1982 | 農用拖拉機拖掛型農具、液壓遙控汽缸的應用 | Agricultural Tractors and Trailing-Type Agricultural Implements, Application of Hydraulic Remote Control Cylinders to |
| ASTM C 1351M-1996 | 用固態垂直汽缸粘滯壓縮在104巴(點)和108巴(點)的玻璃黏滯度測定的標準試驗方法 | Standard Test Method for Measurement of Viscosity of Glass Between 104 Pa-s and 108 Pa-s by Viscous Compression of a Solid Right Cylinder [Metric] |
| ASTM D 5001-2003 | 用汽缸上球式(BOCLE)潤滑性評定儀測量航空渦輪機燃料潤滑性的標準試驗方法 | Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE) |
| BS 5672-1991 | 往復式內燃機汽缸頭的汽缸和閥旋轉方向標示和左、右單列發動機定義的規范 | Specification for designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine for reciprocating internal combustion engines |
| BS AU 264-1995 | 道路車輛.帶有圓錐形底座的M18x1.5火花塞及其汽缸蓋外殼 | Road vehicles - M18 X 1,5 spark-plugs with conical seating and their cylinder head housing |
| BS AU 262-1-1995 | 道路車輛.帶有圓錐形底座的護套型熱線點火塞及其汽缸蓋外殼.M14x1.25熱線點火塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M14 x 1, 25 glow-plugs |
| BS AU 262-2-1995 | 道路車輛.帶有圓錐形底座的護套型熱線點火塞及其汽缸蓋外殼.M12x1.25熱線點火塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M12 x 1.25 glow-plugs |
| BS AU 263-1995 | 道路車輛.帶有圓錐形底座的M14x1.25壓實火花塞及其汽缸蓋外殼 | Road vehicles - M14 X 1,25 compact spark-plugs with conical seating and their cylinder head housing |
| BS ISO 6020-3-1995 | 液壓流體動力.16MPa(160bar)系列單桿汽缸用安裝尺寸.內徑從250mm到500mm的緊湊式系列 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Compact series with bores from 250 mm to 500 mm |
| BS HC 404-1976 | 鉻-鉬合金鑄件鐵環形坩堝(適用于離心鑄造和砂型鑄造密封環、活塞環和汽缸套筒) | Specification for chromium-molybdenum alloy cast iron ring pots (suitable for centrifugally cast and sand cast sealing rings, piston rings and cylinder liners) |
| BS ISO 6981-1996 | 液壓流體動力.汽缸.桿端孔.安裝尺寸 | Hydraulic fluid power - Cylinders - Rod end plain eyes - Mounting dimensions |
| BS ISO 6432-1996 | 氣動流體動力.單桿汽缸.10巴(1100kPa)系列.8-25mm的汽缸內徑.安裝尺寸 | Pneumatic fluid power - Single rod cylinders - 10 bar (1 000 kPa) series - Bores from 8 to 25 mm - Mounting dimensions |
| BS ISO 8131-1996 | 液壓流體動力.16MPa(160 bar)緊湊式系列單桿汽缸.公差 | Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series - Tolerances |
| BS ISO 7181-1997 | 液壓流體動力.汽缸.汽缸內徑和連桿截面比 | Hydraulic fluid power - Cylinders - Bore and rod area ratios |
| BS ISO 7180-1997 | 氣動流體動力.汽缸.汽缸內徑和油口螺紋尺寸 | Pneumatic fluid power - Cylinders - Bore and port thread sizes |
| BS ISO 10762-1998 | 液壓流體動力.汽缸安裝尺寸.10Mpa(100bar)系列 | Hydraulic fluid power - Cylinder mounting dimensions - 10 MPa (100 bar) series |
| BS ISO 6020-1-1998 | 液壓流體動力.16MPa(160bar)系列單桿汽缸安裝尺寸.中型系列 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Medium series |
| BS ISO 1919-1998 | 道路車輛.平底座M14×1.25火花塞及其汽缸蓋外殼 | Road vehicles - M14 x 1,25 spark plugs with flat seating and their cylinder head housings |
| BS ISO 2704-1998 | 道路車輛.平底座M10×1火花塞及其汽缸蓋外殼 | Road vehicles - M10 x 1 spark plugs with flat seating and their cylinder head housings |
| BS ISO 13726-1998 | 液壓流體動力.內徑為250mm-500mm的16MPa(160bar)緊湊式系列單桿汽缸.附件安裝尺寸 | Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm - Accessory mounting dimensions |
| BS ISO 2344-1999 | 道路車輛.M14×1.25錐座火花塞及其汽缸蓋外殼 | Road vehicles - M14 x 1,25 spark plugs with conical seating and their cylinder head housings |
| BS ISO 8137-1997 | 液壓流體動力.250巴(25MPa)系列單桿汽缸.油口尺寸 | Hydraulic fluid power - Single rod cylinders, 250 bar (25 MPa) series - Port dimensions |
| BS ISO 2705-2000 | 道路車輛.M12×1.25平座火花塞和汽缸蓋安裝座 | Road vehicles - M12 x 1,25 spark plugs with flat seating and their cylinder head housings |
| BS ISO 7425-2-2002 | 液壓流體動力.彈性體塑料面密封件的汽缸.尺寸和公差.活塞桿密封汽缸 | Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Rod seal housings |
| BS ISO 2346-2002 | 道路車輛.帶平底座的19mm六角形的M14×1.25小型火花塞及其汽缸蓋外罩 | Road vehicles - M14 x 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing |
| BS ISO 6550-3-2002 | 道路車輛.帶錐形座和汽缸蓋罩的鎧裝加熱塞.第3部分:M10加熱塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M10 glow-plugs |
| BS ISO 7425-1-2002 | 液壓流體動力.彈性體塑料面密封件的汽缸.尺寸和公差.活塞密封汽缸 | Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Piston seal housings |
| BS ISO 6550-4-2005 | 道路車輛.帶錐座封閉型電熱塞及其汽缸蓋安裝孔尺寸.M8 x 1電熱塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M8 x 1 glow-plugs |
| BS ISO 6022-2006 | 液壓傳動.25M Pa (250巴)系列單桿汽缸安裝尺寸 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25M Pa (250 bar) series |
| BS ISO 10766-2006 | 液壓動力.汽缸.活塞及連桿用矩形截面軸承環溝槽尺寸 | Hydraulic fluid power - Cylinders - Housing dimensions forrectangular-sect bearing rings for pistons and rods |
| BS ISO 6020-2-2006 | 液壓流體動力.16MPa(160bar)系列單桿汽缸用安裝尺寸.小型系列 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Compact series |
| DIN 73021-1953 | 汽車發動機旋轉方向、汽缸和點火電路的標志 | Designation of the rotational direction, the cylinders and the ignition circuits of motorcar engines |
| DIN 44770-1-1982 | 第1部分:氣動焊接汽缸、無緩沖雙作用、雙活塞連接尺寸 | Pneumatic welding cylinder, double acting without cushion, double piston, connection dimensions |
| DIN ISO 4395-1985 | 液壓傳動系統和元件.汽缸.活塞桿螺紋尺寸和型式.等同采用ISO 4395-1985版本 | Fluid power systems and components; cylinders; piston rod thread dimensions and types; identical with ISO 4395, edition 1978 |
| DIN ISO 6550-2-1997 | 道路車輛.帶圓錐形密封座和汽缸蓋孔的火花塞.第2部分:火花塞M12*1,25 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 2: M12 × 1,25 glow-plugs (ISO 6550-2:1994) |
| DIN ISO 6550-1-1997 | 道路車輛.錐形密封座火花塞及汽缸蓋孔.第1部分:M14×1.25火花塞 | Road vehicles - Sheat-type glow-plugs with seating and their cylinder head housing - Part 1: M14 × 1,25 glow-plugs (ISO 6550-1:1994) |
| DIN ISO 2345-1997 | 道路車輛.錐形底座M18×1.5火花塞及汽缸蓋座孔 | Road vehicles - M18 × 1,5 spark-plugs with conical seating and their cylinder head housing (ISO 2345:1994) |
| DIN ISO 2347-1997 | 道路車輛.錐形底座M14×1.25小型火花塞及汽缸蓋座孔 | Road vehicles - M14 × 1,25 compact spark-plugs with conical seating and their cylinder head housing (ISO 2347:1994) |
| DIN ISO 2704-2000 | 道路車輛.M10×1平座火花塞及其汽缸蓋安裝孔 | Road vehicles - M10 × 1 spark-plugs with flat seating and their cylinder head housings (ISO 2704:1998) |
| ISO 7285-1995 | 機械化多頭點焊用汽缸 | Pneumatic cylinders for mechanized multiple spot welding |
| ISO 13340-2001 | 可搬運輸汽缸 不可再充氣汽缸閥 規范和原機試驗 | Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing |
| ISO 6550-3-2002 | 道路車輛.帶錐形座的罩型熱線點火塞及其汽缸蓋.第3部分:M10熱線點火塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 3: M10 glow-plugs |
| ISO 6550-4-2005 | 道路車輛.帶錐座的封閉型電熱塞及其汽缸蓋.第4部分:M8 x 1電熱塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - Part 4: M8 x 1 glow-plugs |
| JIS G3473-1988 | 汽缸套筒用碳素鋼鋼管 シリンダチューブ用炭素鋼鋼管 | Carbon steel tubes for cylinder barrels |
| JIS D3103-1989 | 汽車發動機用汽缸襯套 自動車機関用シリンダライナ | Cylinder liners for automotive engines |
| JIS B8368-1-2002 | 氣壓缸的安裝尺寸.第1部分:單桿.帶固定安裝裝置的1 MPa系列、方蓋、系桿密封型液壓氣缸(汽缸內徑32 mm 至 2 Mounting dimensions for pneumatic cylinders -- Part 1: 空気圧シリンダ取付寸法 ― 第１部：片ロッド ― １ＭＰａシリーズ，角カバー形?タイロッド締付（取付金具固定）式（內徑３２ｍｍから２５０ｍｍまで） | Single rod -- 1 MPa series, square cover and tie rod tightend type with fixed mounting devices (Bores from 32 mm to 250 mm) |
| JIS B8368-2-2002 | 氣壓缸的安裝尺寸.第2部分:單桿.帶可分離安裝裝置的1 MPa系列、方蓋、系桿密封型液壓氣缸(汽缸內徑32 mm 至 空気圧シリンダ取付寸法 ― 第２部：片ロッド ― １ＭＰａシリーズ，角カバー形?タイロッド締付（取付金具分離）式（內徑３２ｍｍから３２０ｍｍまで） | Mounting dimensions for pneumatic cylinders -- Part 2: Single rod -- 1 MPa series, square cover and tie rod tightend type with detachable mounting devices (Bores from 32 mm to 320 mm) |
| JIS B8368-3-2002 | 氣壓缸的安裝尺寸.第3部分:單桿.帶固定和可分離安裝裝置型的1 MPa系列、小缸徑液壓氣缸( 汽缸內徑8 mm 至 2 空気圧シリンダ取付寸法 ― 第３部：片ロッド ― １ＭＰａシリーズ，小內徑（取付金具固定又は分離）形（內徑８ｍｍから２５ｍｍまで） | Mounting dimensions for pneumatic cylinders -- Part 3: Single rod -- 1 MPa series, small bore with fixed and detachable mounting device type (Bores from 8 mm to 25 mm) |
| JIS B8368-4-2002 | 氣壓缸的安裝尺寸.第4部分:單桿.1 MPa系列、節省空間型液壓氣缸(汽缸內徑20 mm 至 100 mm) 空気圧シリンダ取付寸法 ― 第４部：片ロッド ― １ＭＰａシリーズ，薄形（內徑２０ｍｍから１００ｍｍまで） | Mounting dimensions for pneumatic cylinders -- Part 4: Single rod -- 1 MPa series, space saving cylinders (Bores from 20 mm to 100 mm) |
| JIS B8367-5-2002 | 液壓氣缸的安裝尺寸.第5部分:單桿.10 MPa系列、方蓋、系桿密封型液壓氣缸(汽缸內徑40 mm 至 200 mm) 油圧シリンダ取付寸法―第５部：片ロッド―１０ＭＰａシリーズ―角カバー形―タイロッド締付式（內徑４０ｍｍ～２００ｍｍ） | Mounting dimensions for hydraulic cylinders -- Part 5: Single rod -- 10 MPa series, square cover and tie rod tightend type (Bores from 40 mm to 200 mm) |
| JIS B8367-6-2002 | 液壓氣缸的安裝尺寸.第6部分:單桿.10 MPa系列、空間窄小型液壓氣缸(汽缸內徑32 mm 至 100 mm) 油圧シリンダ取付寸法―第６部：片ロッド―１０ＭＰａシリーズ―薄形（內徑３２ｍｍから１００ｍｍまで） | Mounting dimensions for hydraulic cylinders -- Part 6: Single rod -- 10 MPa series space saving type (Bores from 32 mm to 100 mm) |
| JB/T 3042-1999 | 組合機床 夾緊油缸 系列參數 | () |
| JB/T 9834-1999 | 農用雙作用油缸 技術條件 | () |
| NF E48-019-2003 | 流體動力系統和元件.油缸內徑和活塞桿直徑.米制系列 | (Fluid power systems and components - Cylinder bores and piston rod diameters - Metric series.) |
| EN 13953-2003 | 液化石油氣（LPG）用可運輸、可再裝油缸卸壓閥 | Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) |
| JIS D2611-1995 | 汽車部件.使用非石油基液壓制動油的液壓盤式制動器油缸的彈性防塵罩 自動車部品 ― 非鉱油系液圧ディスクブレーキのゴムブーツ | Automotive parts -- Elastomeric boots of hydraulic disc brakes cylinders using a non-petroleum base hydraulic brake fluid |
| JIS D2612-2005 | 汽車部件.使用非石油基液壓制動液的液壓制動主油缸用儲油箱密封件 自動車部品－非鉱油系液圧ブレーキマスタシリンダのリザーバシール | Automotive parts -- Reservoir seals for hydraulic brake master cylinders using a non-petroleum base hydraulic brake fluid |
| JIS D2610-2005 | 汽車部件.使用非石油基液壓制動液體的液壓制動主油缸儲油箱用膜片襯墊 自動車部品－非鉱油系液圧ブレーキマスタシリンダのダイヤフラムガスケット | Automotive parts -- Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid |
| 編號 | 中文名稱 | 英文名稱 |