| 編號 | 中文名稱 | 英文名稱 |
|---|
| DIN 32503-1979
| 用于焊接、切割和相關工藝的外殼直徑為63mm的壓力測量儀( 壓力表)的保護罩.
| Protective caps for pressure gauges with case diameter 63 mm used in welding, cutting and allied processes
|
| DIN 75554-1992
| 壓力表
| Pressure gauges
|
| DIN EN 12645-1998
| 壓力表.汽車輪胎的壓力和充氣檢驗設備.計量、要求和試驗
| Pressure gauges - Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles - Metrology, requirements and testing; German version EN 12645:1998
|
| DIN 14421-2001
| 消防泵用壓力表(測壓表)
| Pressure gauges (manometer) for fire pumps
|
| DIN EN 562-2003
| 氣焊設備.焊接、切割和相關工藝用壓力表
| Gas welding equipment - Pressure gauges used in welding, cutting and allied processes; German version EN 562:2003
|
| DIN 16284-2004
| 壓力表及其附件用螺紋接套連接
| Nipple connections for pressure gauges and their accessories
|
| DIN 16287-2004
| 壓力表用閥門和旋塞的試驗連接用蓋
| Caps for test connection on valves and cocks for pressure gauges
|
| DIN 16283-2004
| 壓力表及其附件用調整螺母
| Adjusting nuts for pressure gauges and their accessories
|
| DIN 16271-2004
| 壓力表用帶試驗連接的PN 250和PN 400閥門
| PN 250 and PN 400 valves with test connection for pressure gauges
|
| DIN 16272-2004
| 壓力表用帶關閉試驗連接的PN 250和PN 400閥門
| PN 250 and PN 400 valves with shut-off test connection for pressure gauges
|
| DIN 16282-2004
| 壓力表及其附件用彎管
| Siphons for pressure gauges and their accessories
|
| DIN 16261-2004
| 壓力表用帶內螺紋/內螺紋和內螺紋/外螺紋連接的PN 16旋塞
| PN 16 cocks with female/female and female/male connection for pressure gauges
|
| DIN 16262-2004
| 壓力表用帶調節螺母和軸套式連接的PN 6和PN 16旋塞
| PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges
|
| DIN 16263-2004
| 壓力表用帶調節螺母、軸套式連接和試驗連接的PN 16旋塞
| PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges
|
| DIN 16270-2004
| 壓力表用不帶試驗連接的PN 250和PN 400閥門
| PN 250 and PN 400 valves without test connection for pressure gauges
|
| DIN 6697-1979
| 帶壓力卸料裝置的散裝料運貨車.帶板簧的壓力計.徑向的底部法蘭盤連接
| Bulk freight wagons with pressure discharge; pressure gauge with plate spring, radial bottom flange connection
|
| DIN 6698-1979
| 帶壓力卸料裝置的散裝料運貨車.護板和支撐架與測試壓力計的連接
| Bulk freight wagons with pressure discharge; guard and support with test connection of pressure gauge
|
| DIN 75551-1988
| 汽車的壓力計
| Pressure gauges for automobiles
|
| DIN EN 837-3-1997
| 壓力計.第3部分:膜片和膜盒式壓力計.尺寸、測量技、要求和試驗
| Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-3:1996
|
| DIN EN 12094-10-2003
| 固定消防系統.氣體滅火系統元件.第10部分:壓力計和壓力開關的要求和試驗方法
| Fixed firefighting systems - Components for gas extinguishing systems - Part 10: Requirements and test methods for pressure gauges and pressure switches; German version EN 12094-10:2003
|
| DIN 58653-1960
| 氣象儀器.最低溫度計
| Meteorological devices - Minimum thermometer
|
| DIN 58654-1960
| 氣象儀器.最高溫度計
| Meteorological devices - Maximum thermometer
|
| DIN 58660-1966
| 氣象儀器.干濕球溫度計用370型溫度計
| Meteorological instruments - Thermometer 370 for psychrometer
|
| DIN 58661-1966
| 氣象儀器.干濕球溫度計用280型溫度計
| Meteorological instruments - Thermometer 280 for psychrometer
|
| DIN 58664-1968
| 氣象儀器.地表溫度計
| Meteorological instruments - Earth thermometers
|
| DIN 12775-1975
| 實驗室玻璃儀器.實驗室溫度計.刻度值為0.1℃、0.2℃和0.5℃
| Laboratory glassware; laboratory thermometers, scale values 0,1 °C, 0,2 °C and 0,5 °C
|
| DIN 12778-1975
| 實驗室玻璃儀器.最小刻度值為１攝氏度和２攝氏度的實驗室溫度計
| Laboratory glassware; laboratory thermometers, smallest scale division 1 °C and 2 °C
|
| DIN 12799-1975
| 實驗室玻璃儀器.棒式通用溫度計
| Laboratory glassware; solid stem general purpose thermometers
|
| DIN 12771-1971
| 實驗室玻璃儀器.量度范圍6攝氏度封裝式帶刻度比色溫度計
| Laboratory glassware; enclosed scale colorimeter thermometers of 6 degC range
|
| DIN 12789-1972
| 實驗室玻璃儀器.貝克曼溫度計.量度范圍可調的封裝式帶刻度溫度計
| Laboratory glassware; Beckmann thermometers, adjustable range enclosed scale thermometers
|
| DIN 12776-1976
| 實驗室玻璃儀器.阿林(Allihn)溫度計組
| Laboratory glassware; Allihn thermometer set
|
| DIN 12777-1976
| 實驗室玻璃儀器.保護溫度計組
| Laboratory glassware; Anschuetz thermometer set
|
| DIN 13402-1977
| 醫用電子溫度計
| Medical electronic temperature meter
|
| DIN 12785 Bb.1-1978
| 實驗室玻璃儀器.專用實驗室溫度計.附加說明
| Laboratory glassware; special purpose laboratory thermometers, additional remarks
|
| DIN 12779-1978
| 實驗室玻璃儀器.實驗室溫度計.快速顯示（蒸餾溫度計）
| Laboratory glassware; laboratory thermometers, quickly indicating (distillation thermometers)
|
| DIN 12781-1978
| 實驗室玻璃儀器.實驗室用部分浸入式封閉刻度溫度計
| Laboratory glassware; straight enclosed scale laboratory thermometers for partial immersion
|
| DIN 43729-1978
| 電氣溫度傳感器.熱電偶式溫度計和電阻式溫度計用接線頭
| Electrical temperature sensors; connection heads for thermocouple-thermometers and resistance-thermometers
|
| DIN 43724-1979
| 電氣溫度傳感器.熱電偶溫度計的陶瓷保護套管和夾環
| Electrical temperature sensors; ceramic protecting tubes and holding rings for thermocouple thermometers
|
| DIN 12770-1982
| 實驗室玻璃儀器.液體玻璃溫度計.一般要求
| Laboratory glassware; liquid-in-glass thermometers; general requirements
|
| DIN 12784-1984
| 實驗室玻璃儀器.帶可互換磨口接頭的溫度計
| Laboratory glassware; thermometers with interchangeable ground joint
|
| DIN 43732-1986
| 測量和控制.電溫度傳感器.熱電偶溫度計用熱電偶
| Measurement and control; electrical temperature sensors; thermocouples for thermocouple thermometers
|
| DIN 43733-1986
| 測量和控制.電溫度傳感器.無可互換敏感元件的直觀熱電偶溫度計
| Measurement and control; electrical temperature sensors; straight thermocouple thermometers without interchangeable sensor units
|
| DIN 43734-1986
| 測量和控制.電溫度傳感器.熱電偶溫度計和電阻溫度計用止動法蘭
| Measurement and control; electrical temperature sensors; stop flanges for thermocouple thermometers and resistance thermometers
|
| DIN 43735-1986
| 測量和控制.電溫度傳感器.熱電偶溫度計用傳感元件
| Measurement and control; electrical temperature sensors; Sensor units for thermocouple thermometers
|
| DIN 43762-1986
| 測量和控制.電溫度傳感器.電阻溫度計用傳感元件
| Measurement and control; electrical temperature sensors; sensor units for resistance thermometers
|
| DIN 43764-1986
| 測量和控制.電溫度傳感器.帶有可互換傳感元件的直觀溫度計
| Measurement and control; electrical temperature sensors; straight thermometers with interchangeable sensor units
|
| DIN 43765-1986
| 測量和控制.電溫度傳感器.帶有G1/2安裝螺紋的旋入式溫度計
| Measurement and control; electrical temperature sensors; threaded-stem thermometers with G 1/2 mounting thread
|
| DIN 43766-1986
| 測量和控制.電溫度傳感器.帶有G1安裝螺紋的旋入式溫度計
| Measurement and control; electrical temperature sensors; threaded-stem thermometers with G 1 mounting thread
|
| DIN 43767-1986
| 測量和控制.電溫度傳感器.焊接桿式溫度計
| Measurement and control; electrical temperature sensors; welded-stem thermometers
|
| DIN 43769-1986
| 測量和控制.電溫度傳感器.無附加保護管的溫度計
| Measurement and control; electrical temperature sensors; thermometers not fitted with protecting tubes
|
| DIN 16160-1990
| 溫度計.術語
| Thermometers; concepts
|
| DIN 58655-1960
| 氣象儀器.20至310mm地表溫度計
| Meteorological devices - Ground thermometer 20 up to 310 mm
|
| DIN 75575-1992
| 汽車用溫度計
| Temperatur gauges for motor vehicles
|
| DIN 43771-1989
| 測量和控制.調節.電溫度感受器.快速感應溫度計
| Measurement and control; electrical temperature sensors; fast response thermometers
|
| DIN 12786-1981
| 實驗室玻璃儀器.火力發電站測量用的封閉式刻度溫度計
| Laboratory glassware; enclosed scale thermometers for measurements in heatengine generating stations
|
| DIN 16167-1991
| 工業用標稱規格160，帶圓形殼的直棒式玻璃內液體溫度計.尺寸和標稱范圍
| Industrial straight stem liquid-in-glass thermometers with round case, of nominal size 160; dimensions anf nominal ranges
|
| DIN 16168-1991
| 工業用標稱規格160、圓殼體90°角棒式玻璃內液體溫度計.尺寸和標稱范圍
| Industrial 90 angle stem liquid-in-glass thermometers with round case, of nominal size 160; dimensions and nominal ranges
|
| DIN 16175-1991
| 工業用標稱規格250、圓殼體90°角棒式玻璃內液體溫度計.尺寸和標稱范圍
| Industrial 90 angle stem liquid-in-glass thermometers with round case, of nominal size 250; dimensions and nominal ranges
|
| DIN 16176-1991
| 工業用標稱規格250、圓殼體135°角棒式玻璃內液體溫度計.尺寸和標稱范圍
| Industrial 135 angle stem liquid-in-glass thermometers with round case, of nominal size 250; dimensions and nominal ranges
|
| DIN 16182-1991
| 公稱尺寸110、V字形頂部90°角型玻璃溫度計.尺寸及公稱顯示范圍
| Industrial 90° angle stem liquid-in-glass thermometers with V-shaped case, of nominal size 110; dimensions and nominal ranges
|
| DIN 16185-1991
| 公稱尺寸150、V字形頂部直式玻璃溫度計.尺寸和公稱顯示范圍
| Industrial straight stem liquid-in-glass thermometers with V-shaped case, of nominal size 150; dimensions and nominal ranges
|
| DIN 16186-1991
| 公稱尺寸150、V字形頂部90°角型玻璃溫度計.尺寸和公稱顯示范圍
| Industrial 90° angle stem liquid-in-glass thermometers with V-shaped case, of nominal size 150; dimensions and nominal ranges
|
| DIN 16189-1991
| 公稱尺寸200、V字形頂部直式玻璃溫度計.尺寸和公稱顯示范圍
| Industrial straight stem liquid-in-glass thermometers with V-shaped case, of nominal size 200; dimensions and nominal ranges
|
| DIN 16190-1991
| 公稱尺寸200、V字形頂部90°角型玻璃溫度計.尺寸和公稱顯示范圍
| Industrial 90° angle stem liquid-in-glass thermometers with V-shaped case, of nominal size 200; dimensions and nominal ranges
|
| DIN 16191-1991
| 公稱尺寸200、V字形頂部135°角型玻璃溫度計.尺寸和公稱顯示范圍
| Industrial 135° angle stem liquid-in-glass thermometers with V-shaped case, of nominal size 200; dimensions and nominal ranges
|
| DIN 16195-1991
| 工業用圓形或V形殼體玻璃內液體溫度計.要求和檢驗
| Industrial liquid-in-glass thermometers with round or V-shaped cade; requirements and testing
|
| DIN 12785-1977
| 實驗室玻璃儀器.專用實驗室溫度計
| Laboratory glassware; special purpose laboratory thermometers
|
| DIN 12769-1980
| 液體玻璃溫度計.概要
| Liquid-in-glass thermometers; survey
|
| DIN 12878-1980
| 電氣實驗室設備.可調節的玻璃體內液體接觸溫度計和控制裝置.概述和安全性要求，試驗
| Electrical laboratory equipment; adjustable liquid-in-glass contact thermometers and control devices; general and safety requirements, testing
|
| DIN 16196-1991
| 帶電氣極限觸點裝置的指針式溫度計.填充系統溫度計和雙金屬片溫度計
| Dial indicating thermometers with electrical limit contact devices; filled system thermometers and bimetallic-thermometers
|
| DIN 12770 Bb.1-1982
| 實驗室玻璃器具.玻璃液體溫度計.一般要求.補充說明
| Laboratory glassware; liquid-in-glass thermometers; general requirements; additional remarks
|
| DIN 16174-1991
| 工業用標稱規格250，帶圓形殼的直棒式玻璃內液體溫度計.尺寸和標稱范圍
| Industrial straight stem liquid-in glass thermometer with round case, of nominal size 250; dimensions and nominal ranges
|
| DIN EN 60751-1996
| 工業鉑電阻溫度計傳感器
| Industrial platinum resistance thermometer sensors (IEC 60751:1983 + AMD 1:1986 + AMD 2:1995); German version EN 60751:1995 + A2:1995
|
| DIN 16181-1991
| 帶V形外殼的公稱尺寸110工業用直柄式玻璃液體溫度計.尺寸和公稱顯示范圍
| Industrial straight stem liquid-in-glass thermometers with V-shaped case, of nominal size 110; dimensions and nominal ranges
|
| DIN EN 61152-1994
| 金屬護套溫度計元件的尺寸
| Dimensions of metal-sheathed thermometers elements (IEC 61152:1992, modified); German version EN 61152:1994
|
| DIN EN 12830-1999
| 冷藏、冷凍、深度冷凍/速凍食品與冰激淋的運輸、儲藏與配送用溫度計.試驗、性能與適用性
| Temperature recorders for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice-cream - Tests, performance, suitability; German version EN 12830:1999
|
| DIN 43772-2000
| 控制技術.玻璃管液體溫度計、度盤式溫度計、熱電耦和電阻溫度計用保護管和伸縮管.尺寸、材料和試驗
| Control technology - Protective tubes and extension tubes for liquid-in-glass thermometers, dial thermometers, thermocouples and resistance thermometers - Dimensions, materials, testing
|
| DIN 43772 Bb.1-2000
| 控制技術.玻璃管液體溫度計、度盤式溫度計、熱電耦和電阻溫度計用保護管和伸縮管.指定保護管/溫度計的一般
| Control technology - Protective tubes and extention tubes for liquid-in-glass thermometers, dial thermometers, thermocouples and resistance thermometers - General review; assignment protective tube/thermometer
|
| DIN EN 12470-1-2000
| 體溫計.第1部分:大刻度的玻璃內有金屬液體的溫度計
| Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device; German version EN 12470-1:2000
|
| DIN EN 12470-3-2000
| 體溫計.第3部分:大刻度的小型電測溫度計的性能(可預測和不可預測的)
| Clinical thermometers - Part 3: Performance of compact electrical thermometers (predictive and non-predictive) with maximum device; German version EN 12470-3:2000
|
| DIN EN ISO 10211-2-2001
| 建筑結構熱橋.熱流和表面溫度計算.第2部分:線性熱橋
| Thermal bridges in building construction - Calculation of heat flows and surface temperatures - Part 2: Linear thermal bridges (ISO 10211-2:2001); German version EN ISO 10211-2:2001
|
| DIN EN 13486-2002
| 冷凍、深凍/速凍食品和冰淇淋的運輸、儲存和配送用溫度計記錄儀和溫度計.定期驗證;德文版本 EN 13486:2001
| Thermometer recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Periodic verification; German version EN 13486:2001
|
| DIN EN 13485-2002
| 冷凍、深凍/速凍食品和冰淇淋運輸、儲存和配送的空氣和產品溫度測量用溫度計.試驗、性能、適合性; 德文版本
| Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Test, performance, suitability; German version EN 13485:2001
|
| DIN EN 13190-2002
| 指針式溫度計; 德文版本 EN 13190:2001
| Dial thermometers; German version EN 13190:2001
|
| DIN EN 50216-4-2002
| 電力變壓器和電抗器配件.第4部分:基本附件(接地終端、排放和填充設備、溫度計套和輪組件); 德文版本 EN 502
| Power transformer and reactor fittings - Part 4: Basic accessories (earthing terminal, drain and filling devices, thermometer pocket, wheel assembly); German version EN 50216-4:2002
|
| DIN ISO 16622-2003
| 氣象學.聲吶風速計/溫度計.平均風速計驗收試驗方法
| Meteorology - Sonic anemometers/thermometers - Acceptance test methods for mean wind measurements (ISO 16622:2002)
|
| DIN EN 12470-5-2003
| 體溫計.第5部分:耳蝸式紅外溫度計（和最大器件）的性能
| Clinical thermometers - Part 5: Performance of infra-red ear thermometers (with maximum device); German version EN 12470-5:2003
|
| DIN 32503-1979
| 用于焊接、切割和相關工藝的外殼直徑為63mm的壓力測量儀( 壓力表)的保護罩.
| Protective caps for pressure gauges with case diameter 63 mm used in welding, cutting and allied processes
|
| DIN 4000-61-1992
| 壓力測量儀和測量儀配件的產品特性圖表
| Tabular layouts of article characteristics for pressure gauges and their fittings
|
| DIN EN 472-1994
| 壓力測量儀.詞匯; 德文版本 EN 472:1994
| Pressure gauges - Vocabulary; German version EN 472:1994
|
| DIN EN 61518-2002
| 差動壓力測量儀器和壓強可達413巴(41,3 MPa)帶凸緣的關閉裝置之間的配合尺寸 (IEC 61518:2001); 德文版本 E
| Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa) (IEC 61518:2001); German version EN 61518:2001 + Corrigendum:2002
|
| DIN EN ISO 15616-3-2003
| 高質量焊接和切割用CO2激光機驗收試驗.第3部分:氣體流量和壓力測量儀校正
| Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003); German version EN ISO 15616-3:2003
|
| DIN 16086-2006
| 電動壓力測量儀器.壓力傳感器、壓力測量儀.數據單的概念、規范
| Electrical pressure measuring instruments - Pressure transmitters, pressure measuring instruments - Concepts, specifications on data sheets
|
| DIN 19021-2-1985
| 白熾燈幻燈放映機的評價.第2部分:幻燈片放映區的溫度測量
| Evaluation of still projectors with incandescent lamps; measurement of temperature in the picture area of slides
|
| DIN 53548-1983
| 橡膠的檢驗.按照Gehman試驗通過模量-溫度測量來測定硫化橡膠凍凝性能
| Testing of rubber; determination of the freezing behaviour of vulcanized rubbers by moduls-temperature measurement (Gehman test)
|
| DIN IEC 60510-1-5-1991
| 衛星地面站無線電設備測量方法.第1部分:分系統和分系統組合件通用測量.第5節:噪聲溫度測量
| Methods of measurement for radio equipment used in satellite earth stations; measurement common to sub-systems and combinations of sub-systems; noise temperature measurements; identical with IEC 60510-1-5:1988
|
| DIN 19021-3-1987
| 白熾燈幻燈放映機的評價.第3部分:字幕片放映機投影區的溫度測量
| Evaluation of still projectors with incandescent lamps; measurement of temperature in the projection area of overhead projectors
|
| DIN EN ISO 13916-1996
| 焊接.預熱溫度、層間溫度和預加熱維持溫度測量導則
| Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996); German version EN ISO 13916:1996
|
| DIN 51866-1-2000
| 溫度測量.第1部分:激光光譜學測量法的測量圖
| Temperature measurement - Part 1: Survey of laser spectroscopic methods
|
| DIN EN 61788-10-2003
| 超導性.第10部分:臨界溫度測量.用電阻法測量Nb-Ti-、 Nb3Sn-和Bi-系氧化物復合超導體的臨界溫度
| Superconductivity - Part 10: Critical temperature measurement; Critical temperature of Nb-Ti-, Nb<(Index)3>Sn-, and Bi-system oxide composite superconductors by a resistance method (IEC 61788-10:2002); German version EN 61788-10:2002
|
| DIN EN 12697-13-2001
| 瀝青混合物.熱混合瀝青的試驗方法.第13部分:溫度測量:德文版本 EN 12697-13:2000
| Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement; German version EN 12697-13:2000
|
| DIN 51866-2-2001
| 溫度測量.第2部分:瑞利和喇曼散射
| Temperature measurement - Part 2: Rayleigh- and Raman scattering
|
| DIN EN 13485-2002
| 冷凍、深凍/速凍食品和冰淇淋運輸、儲存和配送的空氣和產品溫度測量用溫度計.試驗、性能、適合性; 德文版本
| Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Test, performance, suitability; German version EN 13485:2001
|
| DIN 13905-1-2004
| 牙科學.牙科用爐.第1部分:用分離式熱電偶進行溫度測量的動態試驗方法
| Dentistry - Dental furnace - Part 1: Dynamic test method for temperature measurement with separate thermocouple |
| 編號 | 中文名稱 | 英文名稱 |
|---|