| 編號 | 中文名稱 | 英文名稱 |
|---|
| EN 10021-1993
| 鋼鐵制品 一般交貨技術條件
| General technical delivery requirements for steel and iron products
|
| EN 10028-7-2000
| 壓力用途的鋼板制品 第7部分：不銹鋼管
| Flat products made of steels for pressure purposes - Part 7: Stainless steels
|
| EN 10036-1989
| 黑色金屬材料的化學分析 鋼鐵中的總碳含量的測定 在氧氣中燃燒后的重量分析法
| Chemical analysis of ferrous materials; determination of total carbon in steels and irons; gravimetric method after combustion in a stream of oxygen
|
| EN 10071-1989
| 黑色金屬材料的化學分析 鋼鐵中的錳含量的測定 電勢滴定法
| Chemical analysis of ferrous materials; determination of manganese in steels and irons; electrometric titration method
|
| EN 10088-1-1995
| 不銹鋼 第1部分：不銹鋼目錄
| Stainless steels - Part 1: List of stainless steels
|
| EN 10088-2-1995
| 不銹鋼 第2部分：一般用及結構用薄板/板材和帶材的交貨技術條件
| Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip for general purposes
|
| EN 10088-3-1995
| 不銹鋼 第3部分：一般用途的半成品、鋼棒、線材和型鋼的交貨技術條件
| Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes
|
| EN 1011-3-2000
| 焊接 金屬材料焊接的推薦規范 第3部分：不銹鋼的電弧焊接
| Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels
|
| EN 10136-1989
| 黑色金屬材料的化學分析 鋼鐵中的鎳含量的測定 火焰原子吸收光譜測定法
| Chemical analysis of ferrous materials; determination of nickel in steels and irons; flame atomic absorption spectrometric method
|
| EN 10151-2002
| 彈簧用不銹鋼鋼帶 交貨技術條件
| Stainless steel strip for springs - Technical delivery conditions
|
| EN 10177-1989
| 黑色金屬材料的化學分析 鋼鐵中鈣的測定 火焰原子吸收光譜法
| Chemical analysis of ferrous materials; determination of calcium in steels; flame atomic absorption spectrometric method
|
| EN 10184-1989
| 黑色金屬材料化學分析 鋼鐵中磷的測定 分光光度法
| Chemical analysis of ferrous materials; determination of phosphorus in steels and irons; spectrophotometric method
|
| EN 10188-1989
| 黑色金屬材料的化學分析 鋼鐵中鉻的測定 火焰原子吸收光譜法
| Chemical analysis of ferrous materials; determination of chromium in steels and irons; flame atomic absorption spectrometric method
|
| EN 10211-1995
| 黑色金屬材料的化學分析 鋼鐵中鈦含量測定 火焰原子吸收光譜測定法
| Chemical analysis of ferrous materials - Determination of titanium in steel and iron - Flame atomic absorption spectrometric method
|
| EN 10212-1995
| 黑色金屬材料的化學分析 鋼鐵中砷含量的測定 分光光度法
| Chemical analysis of ferrous materials - Determination of arsenic in steel and iron - Spectrophotometric method
|
| EN 10222-5-1999+AC-2000
| 壓力用途的鋼鍛件 第5部分：馬氏體、奧氏體、奧氏體-鐵素體不銹鋼
| Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
|
| EN 10228-4-1999
| 鋼鍛件的無損檢測 第4部分：奧氏體和奧氏體-鐵素體不銹鋼鍛件的超聲檢驗
| Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
|
| EN 10250-4-1999
| 一般工程用途的敞口鋼模鍛件 第4部分：不銹鋼
| Open die steel forgings for general engineering purposes - Part 4: Stainless steels
|
| EN 10258-1997
| 冷軋不銹鋼窄帶材和切割長度 尺寸和形狀公差
| Cold-rolled stainless steel narrow strip and cut lengths - Tolerances on dimensions and shape
|
| EN 10259-1997
| 冷軋不銹鋼寬帶材和金屬板/薄板 尺寸和形狀公差
| Cold-rolled stainless steel wide strip and plate/sheet - Tolerances on dimensions and shape
|
| EN 10263-5-2001
| 冷加工和冷擠壓的鋼棒、棒材和線材 第5部分：不銹鋼交貨的一般技術條件
| Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
|
| EN 10264-4-2002
| 鋼絲和鋼絲制品 繩用鋼絲 第4部分：不銹鋼鋼絲
| Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire
|
| EN 10268-1998
| 冷成形用高屈服強度微合金鋼的冷軋扁鋼材 交貨一般條件
| Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditions
|
| EN 10271-1998
| 電鍍鋅鎳的扁鋼材 交貨技術條件
| Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions
|
| EN 10272-2000
| 壓力用途的不銹鋼棒材
| Stainless steel bars for pressure purposes
|
| EN 10276-1-2000
| 鋼鐵材料的化學分析 鋼和鐵中氧的測定 第1部分：氧含量測定中鋼試樣的取樣和制備
| Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination
|
| EN 10276-2-2003
| 鋼鐵材料的化學分析 鋼和鐵中氧的測定 第2部分：在惰性氣體條件下熔融后用紅外光譜法測定
| Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas
|
| EN 10277-1-1999
| 光亮型鋼材 交貨技術條件 第1部分：總則
| Bright steel products - Technical delivery conditions - Part 1: General
|
| EN 10277-2-1999
| 光亮型鋼材 交貨技術條件 第2部分：一般工程用途鋼
| Bright steel products - Technical delivery conditions - Part 2: Steels for general engineering purposes
|
| EN 10277-3-1999
| 光亮型鋼材 交貨技術條件 第3部分：無切削鋼
| Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels
|
| EN 10277-4-1999
| 光亮型鋼材 交貨技術條件 第4部分：表面硬化鋼
| Bright steel products - Technical delivery conditions - Part 4: Case-hardening steels
|
| EN 10277-5-1999
| 光亮型鋼材 交貨技術條件 第5部分：淬火和回火鋼
| Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering
|
| EN 10278-1999
| 光亮型鋼材的尺寸和公差
| Dimensions and tolerances of bright steel products
|
| EN 10306-2001
| 鋼鐵 帶平行法蘭的H鋼梁和IPE鋼梁的超聲波檢驗
| Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams
|
| EN 10307-2001
| 無損檢測 厚度等于或大于6mm的奧氏體和奧氏體鐵素不銹鋼板材的超聲波檢驗（反射式探傷法）
| Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method)
|
| EN 10312-2002
| 傳送人類消耗的含水液體（包括水）的焊焊接不銹鋼管 交貨技術條件
| Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions
|
| EN 1124-1-1999
| 廢水系統用帶套管和插口的縱向焊接不銹鋼管管道及配件 第1部分：要求、測試、質量控制
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
|
| EN 1124-1/prA1-2002
| 廢水系統用帶套管和插口的縱向焊接不銹鋼管管道及配件 第1部分：要求、測試、質量控制 修改A1
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; Amendment A1
|
| EN 1124-2-1999
| 廢水系統用帶套管和插口的縱向焊接不銹鋼管管道和配件 第2部分：系統S 尺寸
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S - Dimensions
|
| EN 1124-3-1999
| 廢水系統用帶套管和插口的縱向焊接不銹鋼管管道及配件 第3部分：系統X 尺寸
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions
|
| EN 12072-1999
| 焊接易耗品 不銹鋼和耐熱鋼電弧焊用絲狀焊條、金屬絲和棒 分級
| Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and heat-resisting steels - Classification
|
| EN 12073-1999
| 焊接易耗品 不銹鋼和耐熱鋼有或無氣體遮蔽金屬電弧焊接用管狀有芯焊條 分級
| Welding consumables - Tubular cored electrodes for metal arc welding with or without a gas shield of stainless and heat-resisting steels - Classification
|
| EN 12501-2-2003
| 金屬材料的防腐 泥土中可能出現的腐蝕 第２部分：低合金和非合金的鋼鐵材料
| Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2: Low alloyed and non alloyed ferrous materials
|
| EN 13322-2-2003
| 可移動氣瓶 再充式焊接不銹鋼氣瓶 設計與結構 第2部分：不銹鋼
| Transportable gas cylinders - Refillable welded steel gas cylinders; Design and construction - Part 2: Stainless steel
|
| EN 13828-2003
| 建筑物閥門 建筑物中飲用水供水用手動銅合金及不銹鋼球閥 試驗和要求
| Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Test and requirements
|
| EN 14222-2003
| 不銹鋼火管鍋爐
| Stainless steel shell boilers
|
| EN 1503-1-2000
| 閥門 閥體、閥帽和閥套用材料 第1部分：歐洲標準中規定的鋼材
| Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards
|
| EN 1503-2-2000
| 閥門 閥體、閥帽和閥套用材料 第2部分：非歐洲標準規定的鋼材
| Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards
|
| EN 253-2003
| 分區供暖管 直接掩埋熱水網用預隔熱連接的管道系統 成套鋼鐵管道設備的管組件、聚氨酯熱絕緣和聚乙烯外覆
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
|
| EN 2596-1988
| 航空航天系列 鍍鎘不銹鋼制徑向鋸齒鎖緊墊圈 尺寸
| Aerospace series - Washers, lock, with radial serrations, in corrosion resisting steel, cadmium plated - Dimensions
|
| EN 2596-1988+AC1-1988
| 航空航天系列 鍍鎘不銹鋼徑向鋸齒形花鍵鎖緊墊圈 尺寸
| Aerospace series; Washers, lock, with radial serrations, in corrosion resisting steel, cadmium plated; Dimensions
|
| EN 448-2003
| 熱水分配管道 地下熱水網用預隔熱包覆層的管道系統 聚氨酯熱絕緣和聚乙烯外覆層的鋼鐵管的配件
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
|
| EN 488-2003
| 熱水分配管道 地下熱水網用預先絕熱包覆的管道系統 成套鋼鐵管道設備的管閥門組件、聚氨酯熱絕緣和聚乙
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
|
| EN 489-2003
| 熱水分配管道 地下熱水網用預隔熱包覆的管道系統 成套鋼鐵管道設備的接頭組件、聚氨酯熱絕緣和聚乙烯外
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
|
| EN 502-1999
| 金屬薄板材制成的屋頂產品 不銹鋼薄板材全支撐屋頂產品規范
| Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet
|
| EN 508-1-2000
| 金屬薄板材制成的屋頂產品 鋼、鋁或不銹鋼薄板自支撐產品規范 第1部分：鋼
| Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel
|
| EN 508-2-2000
| 金屬薄板材制成的屋頂產品 鋼、鋁或不銹鋼薄板自支撐產品規范 第2部分：鋁
| Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium
|
| EN 508-3-2000
| 金屬薄板材制成的屋頂產品 鋼、鋁或不銹鋼薄板自支撐產品規范 第3部分：不銹鋼
| Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
|
| EN ISO 11124-1-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第1部分：一般介紹及分類
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11124-1:1993)
|
| EN ISO 11124-2-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第2部分：冷硬鑄鐵丸
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:1993)
|
| EN ISO 11124-3-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第3部分：高碳鑄鋼丸和砂
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit (ISO 11124-3:1993)
|
| EN ISO 11124-4-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的技術要求 第4部分：低碳鑄鋼丸
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:1993)
|
| EN ISO 11125-1-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法第1部分：抽樣
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993)
|
| EN ISO 11125-2-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法第2部分：顆粒尺寸分布的測定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:1993)
|
| EN ISO 11125-3-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法第3部分：硬度測定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:1993)
|
| EN ISO 11125-4-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法第4部分：表觀密度測定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:1993)
|
| EN ISO 11125-5-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法第5部分：缺陷顆粒的百分比和微結構的測定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:1993)
|
| EN ISO 11125-6-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法第6部分：外來雜質測定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter (ISO 11125-6:1993)
|
| EN ISO 11125-7-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用金屬磨料的試驗方法第7部分：含水量測定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture (ISO 11125-7:1993)
|
| EN ISO 11126-1-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求第1部分：總體介紹和分類(包括技術勘誤1
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11126-1:1993, including Technical Corrigenda 1:1997 and 2:
|
| EN ISO 11126-3-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求第3部分：銅精煉渣
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:1993)
|
| EN ISO 11126-4-1998
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求第4部分：煤爐渣
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:1993)
|
| EN ISO 11126-5-1998
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求第5部分：鎳精煉渣
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel refinery slag (ISO 11126-5:1993)
|
| EN ISO 11126-6-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求第6部分：煉鐵爐渣
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag (ISO 11126-6:1993)
|
| EN ISO 11126-7-1999
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求第7部分：熔融氧化鋁
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:1995)
|
| EN ISO 11126-8-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求第8部分：橄欖石砂
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993)
|
| EN ISO 11127-1-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法第1部分：抽樣
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:1993)
|
| EN ISO 11127-2-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法第2部分：顆粒尺寸分布的測定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:1993)
|
| EN ISO 11127-3-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法第3部分：表觀密度測定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:1993)
|
| EN ISO 11127-4-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法第4部分：通過玻璃載片試驗評定硬度
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:1993)
|
| EN ISO 11127-5-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法第5部分：含水量測定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:1993)
|
| EN ISO 11127-6-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法第6部分：通過測量電導率測定水溶性雜質
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:1993)
|
| EN ISO 11127-7-1997
| 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的試驗方法第7部分：水溶性氯化物的測定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water soluble chlorides (ISO 11127-7:1993)
|
| EN ISO 1127-1996
| 不銹鋼管 尺寸、公差和單位長度的公稱質量
| Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length
|
| EN ISO 1461-1999
| 鋼鐵制件的熱浸鋅層 規范和試驗方法
| Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:1999)
|
| EN ISO 16048-2003
| 耐蝕不銹鋼緊固件的鈍化
| Passivation of corrosion-resistant stainless steel fasteners (ISO 16048:2003)
|
| EN ISO 2338-1997
| 不淬硬鋼和奧氏體不銹鋼圓錐銷
| Parallel pins, of unhardened steel and austenitic stainless steel (ISO 2338:1997)
|
| EN ISO 3506-1-1997
| 耐腐蝕不銹鋼緊固件的機械性能 第1部分：螺栓、螺釘和螺柱
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:1997)
|
| EN ISO 3506-2-1997
| 耐腐蝕不銹鋼緊固件的機械性能 第2部分：螺母
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 2: Nuts (ISO 3506-2:1997)
|
| EN ISO 3506-3-1997
| 耐腐蝕不銹鋼緊固件的機械性能 第3部分：緊定螺釘及類似的不受應力的螺紋緊固件
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:1997)
|
| EN ISO 3506-4-2003
| 耐腐蝕不銹鋼緊固件的機械性能 第4部分：自攻螺釘
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 4: Tapping screws (ISO 3506-4:2003)
|
| EN ISO 3651-1-1998
| 不銹鋼耐晶間腐蝕的測定 第1部分：奧氏體和鐵素奧氏體(二重)不銹鋼 用失重測定法在硝酸介質中的腐蝕試驗(
| Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (ISO 3651-1:1998)
|
| EN ISO 3651-2-1998
| 不銹鋼耐晶間腐蝕的測定 第2部分：奧氏體、奧氏體和鐵素奧氏體(二重)不銹鋼 在硫酸介質中的腐蝕試驗
| Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid (ISO 3651-2:1998)
|
| EN ISO 3823-1-1998
| 牙科旋轉器械 牙鉆 第1部分：不銹鋼牙鉆和硬質合金牙鉆
| Dental rotary instruments - Burs - Part 1: Steel and carbide burs (ISO 3823:1997)
|
| EN ISO 7046-2-1994
| 十字槽沉頭(通用頭型)螺釘 產品等級A級 第2部分：性能等級 鋼8.8級、不銹鋼和有色金屬
| Cross recessed countersunk flat head screws (common head style) - Grade A - Part 2: Steel of property class 8.8, stainless steel and non-ferrous metals (ISO 7046-2:1990)
|
| EN ISO 7153-1-2000
| 外科器械 金屬材料 第1部分：不銹鋼
| Surgical instruments - Metallic materials - Part 1: Stainless steel (ISO 7153-1:1991, including Amendment 1:1999)
|
| EN ISO 8249-2000
| 焊接 奧氏體和成雙鐵素體奧氏體鎳－鉻不銹鋼焊接金屬中鐵素體數(FN)的測定
| Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2000)
|
| EN ISO 8442-2-1997
| 與食品接觸的材料和制品 刀具與凹形餐具 第2部分：不銹鋼及鍍銀刀具的要求
| Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 2: Requirements for stainless steel and silver-plated cutlery (ISO 8442-2:1997)
|
| EN ISO 8501-1 Supplement-2001
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的目視評定 第1部分的補充信息：用不同磨料噴砂處理時鋼表面
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Informative supplement to Part 1: Representative photographic examples of the change of appearance imparted to steel when blast
|
| EN ISO 8501-1-2001
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的目視評定 第1部分：未涂裝的鋼材和全面清除原有涂層后鋼材
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previo
|
| EN ISO 8501-2-2001
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的目視評定 第2部分：局部清除原有涂層后鋼材的銹蝕等級
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings (ISO 8501-2:1994)
|
| EN ISO 8502-2-1999
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第2部分：清理過的表面上的氯化物的實驗室測定
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:1992)
|
| EN ISO 8502-3-1999
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第3部分：油漆前預處理后的鋼材表面上的灰塵評定
| Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:1992)
|
| EN ISO 8502-4-1999
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第4部分：油覆前凝露可能性的評定導則
| Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:1993)
|
| EN ISO 8502-6-1999
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第6部分：分析用可溶性雜質的提取 Bresle法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method (ISO 8502-6:1995)
|
| EN ISO 8502-9-2000
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第9部分：水溶性鹽的現場電導測定法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998)
|
| EN ISO 8503-1-1995
| 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第1部分：磨料噴射清理表面粗糙度的ISO評
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abr
|
| EN ISO 8503-2-1995
| 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第2部分：磨料噴射清理表面粗糙度的定級
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proce
|
| EN ISO 8503-3-1995
| 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第3部分：ISO表面輪廓比較儀的校準方法和
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of s
|
| EN ISO 8503-4-1995
| 涂裝油漆和有關產品前鋼材預處理 噴射清理鋼材的表面粗糙度特性 第4部分：ISO表面輪廓比較儀的校準方法和
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of s
|
| EN ISO 8504-1-2001
| 涂裝油漆和有關產品前鋼材預處理 表面預處理方法 第1部分：總則
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000)
|
| EN ISO 8504-2-2001
| 涂裝油漆和有關產品前鋼材預處理 表面預處理方法 第2部分：磨料噴射清理
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000)
|
| EN ISO 8504-3-2001
| 涂裝油漆和有關產品前鋼材預處理 表面預處理方法 第3部分：手工和動力工具清洗
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:1993)
|
| EN ISO 8733-1997
| 不淬硬鋼或奧氏體不銹鋼內螺紋圓柱銷
| Parallel pins with internal thread, of unhardened steel or austenitic stainless steel (ISO 8733:1997)
|
| EN ISO 8734-1997
| 淬硬鋼和馬氏體不銹鋼(定位銷)圓柱銷
| Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins) (ISO 8734:1997)
|
| EN ISO 8735-1997
| 淬硬鋼或馬氏體不銹鋼內螺紋圓柱銷
| Parallel pins with internal thread, of hardened steel or martensitic stainless steel (ISO 8735:1997)
|
| ENV 10080-1995
| 混凝土加固用鋼材 為適于焊接而加筋的混凝土鋼B500 棒、 環盤 已焊過的鋼筋網的交貨技術條件
| Steel for the reinforcement of concrete - Weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric / Note: Withdrawn by mistake
|
| ENV 1090-6-2000
| 鋼結構制作 第6部分：不銹鋼的補充規則
| Execution of steel structures - Part 6: Supplementary rules for stainless steel
|
| ENV 1993-1-4-1996
| 歐洲法典3：鋼結構設計 第1-4部分：一般規則 關于不銹鋼的補充規則
| Eurocode 3: Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
|
| ENV ISO 8502-1-1999
| 涂裝油漆和有關產品前鋼材預處理 表面清潔度的評定試驗 第1部分：可溶性鐵銹現場試驗
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 1: Field test for soluble iron corrosion products (ISO/TR 8502-1:1991)
|
| FZ 92065-2006
| 不銹鋼焊接式烘筒
| Stainless steel welding cylinder
|
| prEN 10060-2003
| 熱軋圓鋼棒 形狀和尺寸的公差和尺寸
| Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
| prEN 10080-1-1999
| 鋼筋混凝土用鋼材 可焊鋼筋 第1部分：一般要求
| Steel for the reinforcement of concrete - Weldable reinforcing steel - Part 1: General requirements
|
| prEN 10080-2-1999
| 鋼筋混凝土用鋼材 可焊鋼筋 第2部分：A類交貨技術條件
| Steel for the reinforcement of concrete - Weldable reinforcing steel - Part 2: Technical delivery conditions for class A
|
| prEN 10080-3-1999
| 鋼筋混凝土用鋼材 可焊鋼筋 第3部分：B類交貨技術條件
| Steel for the reinforcement of concrete - Weldable reinforcing steel - Part 3: Technical delivery conditions for class B
|
| prEN 10080-4-1999
| 鋼筋混凝土用鋼材 可焊鋼筋 第4部分：C類交貨技術條件
| Steel for the reinforcement of concrete - Weldable reinforcing steel - Part 4: Technical delivery conditions for class C
|
| prEN 10080-5-1999
| 鋼筋混凝土用鋼材 可焊鋼筋 第5部分：焊接鋼筋網交貨技術條件
| Steel for the reinforcement of concrete - Weldable reinforcing steel - Part 5: Technical delivery conditions for welded fabric
|
| prEN 10080-6-1999
| 鋼筋混凝土用鋼材 可焊鋼筋 第6部分：結構梁交貨技術條件
| Steel for the reinforcement of concrete - Weldable reinforcing steel - Part 6: Technical delivery conditions for lattice girders
|
| prEN 10088-1-2001
| 不銹鋼 第1部分：不銹鋼目錄
| Stainless steels - Part 1: List of stainless steels
|
| prEN 10088-2-2001
| 不銹鋼 第2部分：一般用及結構用薄板/板材和帶材的交貨技術條件
| Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general and construction purposes
|
| prEN 10088-3-2001
| 不銹鋼 第3部分：一般用及結構用耐腐蝕鋼的半成品、鋼棒、線材型鋼和光亮產品的交貨技術條件
| Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general and construction purposes
|
| prEN 10108-2000
| 冷成型螺母和螺栓用圓鋼棒 尺寸和公差
| Round steel rod for cold formed nuts and bolts - Dimensions and tolerances
|
| prEN 10138-1-2000
| 預應力鋼材 第1部分：一般要求
| Prestressing steels - Part 1: General requirements
|
| prEN 10138-2-2000
| 預應力鋼材 第2部分：線材
| Prestressing steels - Part 2: Wire
|
| prEN 10138-3-2000
| 預應力鋼材 第3部分：鋼絞線
| Prestressing steels - Part 3: Strand
|
| prEN 10138-4-2000
| 預應力鋼材 第4部分：棒材
| Prestressing steels - Part 4: Bars
|
| prEN 10138-5-1991
| 預應力鋼材 第5部分：淬火和回火線材
| Prestressing steels; part 5: quenched and tempered wire
|
| prEN 10201-1988
| 黑色金屬材料的化學分析 鋼鐵中硅的測定 火焰原子吸收光譜法
| Chemical analysis of ferrous materials; determination of silicon in steel and iron; flame atomic absoption spectrometric method
|
| prEN 10216-5-1998
| 壓力用途的無縫鋼管 交貨技術條件 第5部分：不銹鋼管
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
|
| prEN 10217-7-1998
| 壓力用途的焊接鋼管 交貨技術條件 第7部分：不銹鋼管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
|
| prEN 10222-6-1994
| 壓力用途的鋼鍛件 第6部分：奧氏體、馬氏體和奧氏體-鐵素體不銹鋼
| Steel forgings for pressure purposes - Part 6: Austenitic, martensitic and austenitic-ferritic stainless steels
|
| prEN 10296-2-2001
| 機械和一般工程用途的焊接鋼管 交貨技術條件 第2部分：不銹鋼管
| Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel tubes
|
| prEN 10297-2-2001
| 機械和一般工程用途的無縫環行鋼管 交貨技術條件 第2部分：不銹鋼管
| Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel tubes
|
| prEN 12502-3-2001
| 金屬材料的防腐 輸水系統中的可能出現的腐蝕 第３部分：熱浸鍍鋅鋼鐵材料影響因素的評價
| Protection of metallic materials against corrosion - Corrosion likelihood in water - Part 3: Review of the influencing factors for hot dip galvanised ferrous materials
|
| prEN 12502-4-2001
| 金屬材料的防腐 輸水系統中的可能出現的腐蝕 第４部分：不銹鋼影響因素的評價
| Protection of metallic materials against corrosion - Corrosion likelihood in water conveying systems - Part 4: Review of the influencing factors for stainless steels
|
| prEN 14330-2003
| 內河船 無橫檔錨鏈 圓鋼環鏈
| Inland navigation vessels - Studless anchor chain - Round steel link chain
|
| prEN 2596-2002
| 航空航天系列 鍍鎘不銹鋼徑向鋸齒形花鍵飛行器操縱桿鎖緊墊圈 尺寸
| Aerospace series - Washers, lock with radial serrations in corrosion resisting steel, cadmium plated - Dimensions
|
| prEN 6110-2000
| 航空航天系列 不銹鋼100 平頭盲螺栓
| Aerospace series - Bolts, blind, 100?flush head, stainless steel
|
| prEN ISO 10806-2003
| 管道工程 皺紋軟金屬管用非合金及不銹鋼配件
| Pipework - Fittings for corrugated metallic hoses (ISO/FDIS 10806:2003)
|
| 編號 | 中文名稱 | 英文名稱 |
|---|