| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ASTM A 1020/A 1020M-2002 | 鍋爐、加熱器、熱交換器和冷凝器裝置的熔焊碳素和碳錳鋼管的標準規范 | Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications |
| ASTM A 178/A 178M-2002 | 電阻焊接碳素鋼和碳錳鋼鍋爐和過熱器管的標準規范 | Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes |
| ASTM A 455/A 455M-2003 | 壓力容器用高強度碳錳鋼板標準規范 | Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese |
| ASTM A 529/A 529M-2005 | 結構級高強度碳錳鋼的標準規范 | Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality |
| ASTM A 67-2000 | 熱加工的低碳鋼和高碳鋼墊板的標準規范 | Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked |
| ASTM A 682/A 682M-2005 | 冷軋高碳鋼帶材一般要求的標準規范 | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For&dup2; |
| ASTM A 684/A 684M-1986 | 冷軋高碳鋼帶材的標準規范 | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled |
| ASTM B 242-1999 | 電鍍用高碳鋼制備的標準實施規范 | Standard Guide for Preparation of High-Carbon Steel for Electroplating |
| ASTM E 2209-2002 | 用原子發射光譜法分析高錳鋼的標準試驗方法 | Standard Test Method for Analysis of High Manganese Steel Using Atomic Emission Spectrometry |
| BS 2772-3-1987 | 礦山運輸和提升設備.1.5%錳鋼鑄件規范 | Colliery haulage and winding equipment - Specification for 1.5% manganese steel castings |
| BS 2S 514-1969 | 碳錳鋼薄板和帶材規范(淬火和回火條件:77/100MPa)(適用于焊接) | Specification for carbon-manganese steel sheet and strip (for use in the hardened and tempered condition: 770/1000 MPa) (suitable for welding) |
| BS 2S 515-1969 | 碳錳鋼薄板和帶材規范(退火的)(退火條件:46/59MPa)(適用于焊接) | Specification for carbon-manganese steel sheet and strip (softened) (for use in the softened condition: 460/600 MPa) (suitable for welding) |
| BS 2S 92-1964 | 飛機材料規范.碳錳鋼(適用于焊接)(40/55噸力/平方英寸;限定等圓斷面4英寸) | Specification for aircraft material - Carbon-manganese steel (suitable for welding) (40/55 tonf/sq in: limiting ruling section 4 in) |
| BS 4515-1-2004 | 陸地和近海鋼管道焊接規范.碳及碳錳鋼管 | Specification for welding of steel pipelines on land and offshore - Carbon and carbon manganese steel pipelines |
| BS 4T 45-1972 | 碳-錳鋼管材規格(700 N/mm<上標2>)(管外徑大于或等于12.5mm)(可焊接) | Specification for carbon-manganese steel tube (700 N/mm2) (tube 12.5 mm outside diameter and greater) (weldable) |
| BS EN 13293-2002 | 可運輸儲氣瓶.壓縮、液化和溶解氣體用的水容量高達0.5升和二氧化碳用的水容量高達１升的可再充裝無縫正火碳 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide |
| BS HC 2-1973 | 碳錳鋼鑄件(550牛頓/平方毫米)規范 | Specification for carbon-manganese steel castings (550 N/mm2) |
| BS T 64-1972 | 碳-錳鋼管材規范(550 N/mm<上標2>)(管外徑小于12.5mm)(可焊接) | Specification for carbon-manganese steel tube (550 N/mm2) (tube less than 12.5 mm outside diameter) (weldable) |
| DIN EN 13293-2003 | 可運輸?shù)膬馄?壓縮、液化和不溶性氣體用水容量不超過0.5升以及二氧化碳用水容量不超過1升的可反復灌裝可 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalised carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide; German version EN 13293:2002 |
| EN 13293-2002 | 可移動氣瓶 1升和1升以下的可移動再充式無縫正火碳錳鋼氣瓶的設計和建造規范 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalized carbon managanese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 |
| GB/T 13925-1992 | 鑄造高錳鋼金相 | Metallographs for high manganese cast steel |
| GB/T 5312-1999 | 船舶用碳鋼和碳錳鋼無縫鋼管 | Carbon and carbon-manganese steel seamlesssteel tubes and pipes for ship |
| GB/T 5680-1998 | 高錳鋼鑄件 | Austenitic manganese steel castings |
| ISO 13521-1999 | 奧氏體錳鋼鑄件 | Austenitic manganese steel castings |
| JB/T 5940-1991 | 工程機械 高錳鋼鑄件通用技術條件 | () |
| JB/T 6404-1992 | 大型高錳鋼鑄件 | () |
| JIS G3506-2004 | 高碳鋼線材 硬鋼線材 | High carbon steel wire rods |
| JIS G5131-1991 | 高錳鋼鑄件 高マンガン鋼鋳鋼品 | High manganese steel castings |
| NF A04-111-1980 | 鋼鐵產品.高碳鋼線材脫碳深度的顯微照相法測定 | (IRON AND STEEL. MICROGRAPHIC DETERMINATION OF THE EXTENT OF DECARBURISATION OF NON ALLOY HIGH CARBON STEEL WIRE ROD.) |
| NF A04-113-1984 | 鋼鐵產品.由鋼錠加工的高碳鋼線材.化學雜質成分的描述及使其顯示的的宏觀檢查法 | (Iron and steel. High carbon steel wire rod derived from ingots. Macrographic method of showing and describing the chemical heterogeneity.) |
| NF A36-601-1980 | 鍋爐和壓力容器用可焊鋼制鍛件.碳鋼和碳錳鋼.質量等級和類型 | (WELDED STEEL FORGINGS FOR BOILERS AND PRESSURE VESSELS. CARBON AND CARBON MANGANESE STEELS. GRADES AND TYPES.) |
| NF A36-605-1982 | 鍋爐和壓力容器用焊接鋼沖壓鍛件.碳鋼和碳錳鋼.牌號與型號 | (Weldable steel drip forged articles for boilers and pressure vessels. Carbon and carbon-manganese steels. Grades and types .) |
| NF A49-875-12-2000 | 鋼管的無損檢驗.第12部分:檢測表面缺陷用無縫和焊接錳鋼管的磁粉檢測 | (Non-destructive testing of steel tubes - Part 12 : magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections.) |
| NF A49-875-18-2000 | 鋼管的無損檢驗.第18部分:層面缺陷探測用無縫和焊接錳鋼管末端磁粉檢驗 | (Non-destructive testing of steel tubes - Part 18 : magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections.) |
| NF A49-875-5-2000 | 鋼管的無損檢驗.第5部分:檢測縱向缺陷用無縫和焊接(除埋弧焊)錳鋼管的自動全周邊電磁變換器/磁漏試驗 | (Non-destructive testing of steel tubes - Part 5 : automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for) |
| NF A49-903-2003 | 可運輸?shù)膬馄?容量為1升及1升以下的可再充裝的、可運輸無縫正火碳錳鋼儲氣瓶的設計和制造規范 | (Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalised carbon manganese steel gas cylinders up to and including 1 litre.) |
| NF A81-311-1994 | 碳鋼、碳錳鋼和微合金鋼的氣體金屬電弧焊絲狀電極和電積物的分類 | (Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification.) |
| NF F18-001-1988 | 鐵路車輛.錳鋼磨損板.特性.焊接規定 | (ROLLING STOCK. WEARING PLATES MADE OF MANGANESES STEEL. CHARACTERISTICS. WELDING PRESCRIPTIONS.) |
| QB/T 2272-2007 | 表用Y100Pb易切削高碳鋼棒 | Y100Pb Free-cutting High-carbon steel bars for watches |
| SY/T 10004-1996 | 海上平臺管節點用碳錳鋼板規范 | () |
| SY/T 10051.1-2004 | 海上結構用改良韌性的碳錳鋼板規范 | () |
| SY/T 1051.1-2004 | 海上結構用改良韌性的碳錳鋼板規范 | () |
| YB/T 036.4-1992(2005) | 冶金設備制造通用技術條件 高錳鋼鑄件 | () |
| YB/T 169-2000(2006年確認) | 高碳鋼盤條索氏體含量金相檢測方法 | () |
| 編號 | 中文名稱 | 英文名稱 |