| 編號 | 中文名稱 | 英文名稱 |
|---|
| ANSI B11.2-1995
| 機床.液壓機.制造、維護和使用的安全性要求
| Machine tools - Hydraulic power presses - Safety requirements for construction, care, and use
|
| ASTM D 4161-2001
| 使用撓性彈性體密封件的"玻璃鋼"(玻璃纖維增強熱固樹脂)管接頭標準規范
| Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
|
| BS 5655-10.2.1-1995
| 電梯與服務電梯.第10部分:試驗和檢驗規范.第2節:液壓機.第1小節:新升降機交付使用試驗
| Lifts and service lifts - Specification for the testing and examination of lifts and service lifts - Hydraulic lifts - Commissioning tests for new lifts
|
| BS EN 12312-19-2005
| 飛行器地面支持設備.特殊要求.飛行器千斤頂、軸式千斤頂和液壓機尾托架
| Aircraft ground support equipment - Specific requirements - Aircraft jacks, axle jacks, and hydraulic tail stanchions
|
| BS EN 13121-1-2003
| 地面用玻璃鋼槽罐和容器.原材料.技術條件和驗收條件
| GRP tanks and vessels for use above ground - Raw materials - Specification conditions and acceptance conditions
|
| BS EN 693-2001
| 機床的安全性.液壓機
| Machine tools - Safety - Hydraulic presses
|
| DIN 2781-1990
| 機床.液壓機的45°單頭鋸齒螺紋
| Machine tools; buttress thread 45°, single start, for hydraulic presses
|
| DIN 28136-14-1999
| 攪拌容器.第14部分:BE型d1=2400-3600mm的搪玻璃鋼攪拌容器用蓋噴嘴的位置和大小, CE型d1=2400-3600mm的搪
| Agitator vessels - Part 14: Position and sizes of cover nozzles for glass lined steel agitator vessels, position H for vessels form BE with d<(Index)1> = 2400 mm to 3600 mm and position K for vessels form CE with d<(Index)1> = 2400 mm to 3600 mm; inactive for new design
|
| DIN 28136-3-2005
| 攪拌容器.第3部分:搪玻璃鋼件攪拌容器頂蓋噴嘴的位置和尺寸
| Agitator vessels - Part 3: Position and sizes of cover nozzles for glass lined steel agitator vessels
|
| DIN 28138-2-2006
| 攪拌器軸的滾動機構密封.第2部分:線紋玻璃鋼.使用數據、組裝尺寸
| Rotating mechanical seals for agitator shafts - Part 2: Steel, glass-lined - Operating data, assembly dimensions
|
| DIN 28140-2-2005
| 排泄閥用連接件.第2部分:搪玻璃鋼件.連接尺寸PN10
| Connections for bottom discharge valves - Part 2: On glass lined steel; connecting dimensions PN 10
|
| DIN 28145-5-1995
| 搪玻璃鋼攪拌容器用焊接件.第5部分:底部泄料孔處絕緣接頭
| Parts welded to glass lined steel agitator vessels - Part 5: Insulation collar at the bottom discharge opening
|
| DIN 48083-3-1985
| 壓力連接件用壓力機模具.標稱壓力為300、450 和1000KN以下的液壓機.尺寸
| Dies for presses for pressure connections; hydraulical presses with a nominal compressive force up to 300, up to 450 and up to 1000 kN connecting; dimensions
|
| DIN 55189-2-1988
| 機床.靜態負荷下板金加工沖壓參數的測定.第2部分:液壓機
| Machine tools; determination of the ratings of presses for sheet metal working under static load; hydraulic presses
|
| DIN EN 976-1-1997
| 玻璃鋼制地下槽罐(GRP).石油基液化燃料無壓力存儲用臥式圓桶罐.第1部分:單壁罐的要求和試驗方法
| Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks; German version EN 976-1:1997
|
| DIN EN 976-2-1997
| 玻璃鋼制地下槽罐(GRP).石油基液化燃料無壓力存儲用臥式圓桶罐.第2部分:運輸,搬運,中間存儲,單壁罐的安裝
| Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non pressure storage of liquid petroleum based fuels - Part 2: Transport, handling, storage and installation of single wall tanks; German version EN 976-2:1997
|
| DIN EN 977-1997
| 玻璃鋼制地下槽罐(GRP).單面液體負載試驗方法
| Underground tanks of glass-reinforced plastics (GRP) - Method for one side exposure to fluids; German version EN 977:1997
|
| DIN EN 978-1997
| 玻璃鋼地下槽罐(GRP).系數α和β測定
| Underground tanks of glass-reinforced plastics (GRP) - Determination of creep factor and factor ; German version EN 978:1997
|
| GB 13115-1991
| 食品容器及包裝材料用不飽和聚酯樹脂及其玻璃鋼制品衛生標準
| Hygienic standard for unsaturated polyester resin and glass fibre reinforced plastics used asfood containers and packaging materials
|
| GB 16413-1996
| 煤礦井下用玻璃鋼制品安全性能檢驗規范
| Test of glass fiber reinforced plastic product safety property for coal mining
|
| GB 18545-2001
| 車間空氣中玻璃鋼粉塵職業接觸限值
| Occupational exposure limit for fiberglass reinforced plastic dust in the air of workplace
|
| GB/T 5009.98-2003
| 食品容器及包裝材料用不飽和聚酯樹脂及其玻璃鋼制品衛生標準的分析方法
| Method for analysis of hygienic standard of unsatur-ated polyester resin and glass fibre reinforced plastics used as food containers and packaging materials
|
| GB/T 9166-1988
| 四柱液壓機精度
| Four-column hydraulic presses--Testing of the accuracy
|
| HG/T 20520-1992
| 玻璃鋼/聚氯乙烯復合管道設計規定
| ()
|
| HG/T 20696-1999
| 玻璃鋼化工設備設計規定
| ()
|
| HG/T 21504.1～.2-1992
| 玻璃鋼儲槽標準系列、拼裝式玻璃鋼儲罐標準系列
| ()
|
| HG/T 21579-1995
| 聚丙烯/玻璃鋼（PP/FRP）復合管及管件
| ()
|
| HG/T 21633-1991
| 玻璃鋼管和管件
| ()
|
| HG/T 21636-1987
| 玻璃鋼/聚氯乙烯（FRP/PVC)復合管和管件
| ()
|
| JB 3915-1985
| 液壓機 安全技術條件
| ()
|
| JB 9967-1999
| 液壓機 噪聲限值
| ()
|
| JB/T 1808-2005
| 電極擠壓液壓機
| ()
|
| JB/T 1881-1999
| 切邊液壓機 型式與基本參數
| ()
|
| JB/T 2098-1999
| 單臂沖壓液壓機 型式與基本參數
| ()
|
| JB/T 3818-1999
| 液壓機 技術條件
| ()
|
| JB/T 3819-1984
| 粉末制品液壓機 精度
| ()
|
| JB/T 3820-1984
| 塑料制品液壓機 精度
| ()
|
| JB/T 3821-1984
| 雙動薄板拉伸液壓機 精度
| ()
|
| JB/T 3843-1999
| 液壓機 緊固模具用槽、孔的分布形式與尺寸
| ()
|
| JB/T 3844-1985
| 金屬擠壓液壓機 精度
| ()
|
| JB/T 3844.1-1999
| 金屬擠壓液壓機 基本參數
| ()
|
| JB/T 3863-1999
| 磨料制品液壓機 型式與基本參數
| ()
|
| JB/T 3864-1985
| 磨料制品液壓機 精度
| ()
|
| JB/T 4174-1986
| 液壓機 名詞術語
| ()
|
| JB/T 611-1991
| 液壓機 主參數系列
| ()
|
| JB/T 6584-1993
| 磁性材料液壓機 技術條件
| ()
|
| JB/T 6998-1993
| 25MN金剛石液壓機
| ()
|
| JB/T 7177-1993
| 精密沖裁液壓機 精度
| ()
|
| JB/T 7343-1994
| 單雙動薄板沖壓液壓機
| ()
|
| JB/T 7678-2007
| 雙動厚板沖壓液壓機
| ()
|
| JB/T 8492-1996
| 單動薄板沖壓液壓機 基本參數
| ()
|
| JB/T 8493-1996
| 雙動薄板拉伸液壓機 基本參數
| ()
|
| JB/T 8494-1996
| 金屬打包液壓機 技術條件
| ()
|
| JB/T 8779-1998
| 超硬材料六面頂液壓機 技術條件
| ()
|
| JB/T 9957.1-1999
| 四柱液壓機 性能試驗方法
| ()
|
| JB/T 9957.2-1999
| 四柱液壓機 型式與基本參數
| ()
|
| JB/T 9958.1-1999
| 單柱液壓機 型式與基本參數
| ()
|
| JB/T 9958.2-1999
| 單柱液壓機 精度
| ()
|
| JC/T 910-2003
| 陶瓷磚自動液壓機
| ()
|
| JC/T 988-2005
| 電纜用玻璃鋼保護管
| ()
|
| JIS B6403-1994
| 液壓機.準確度的測試
| Hydraulic presses -- Testing of the accuracy
|
| MT 558.3－2005
| 煤礦井下用塑料管材 第3部分：玻璃鋼管材
| ()
|
| MT 961－2005
| 煤礦井下用玻璃鋼電纜橋架
| ()
|
| NF C55-420-1993
| 液壓機(渦輪、存儲泵和水泵-水輪機)的振動和脈動的現場測量指南
| (Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storga pumps and pump-turbines).)
|
| NF P18-411-1981
| 混凝土.硬材料彎曲.壓縮和拉力試驗用液壓機的一般特性
| (Concretes. Common characteristics of hydraulic machines for compression, bending, and tension testing of hard materials.)
|
| NF P18-412-1981
| 混凝土.硬材料壓縮試驗用液壓機的特殊性能
| (Concretes. Individual properties of hydraulic machines for compression tests. (presses for hard materials).)
|
| NF P18-413-1981
| 混凝土.硬材料彎曲試驗用液壓機的特殊性能
| (Concretes. Individual properties of hydraulic machines for bending tests of hard materials.)
|
| SY/T 0326-2002
| 鋼制儲罐內襯環氧玻璃鋼技術標準
| ()
|
| 編號 | 中文名稱 | 英文名稱 |
|---|