| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI/ASTM D1201-1999 | 熱固性聚酯模壓化合物規范 | Specification for Thermosetting Polyester Molding Compounds |
| ANSI/ASTM D4020-2001 | 超高分子量聚乙烯模壓和擠壓材料規范(08.02) | Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials (08.02) |
| ANSI/ASTM D4703-2000 | 熱塑模壓試樣、飾板或薄板后試樣的切削、沖壓或機械加工慣例 | Practice for Compression Molding Thermoplastics into Test Specimens and Plaques or Sheets from which Specimens will be Cut, Stamped or Machined |
| ANSI/ASTM D4745-2001 | 聚四氟乙烯模壓和擠壓料填充化合物新標準規范 New | Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials (08.03) |
| ANSI/ASTM D6041-1997 | 接觸模壓"纖維玻璃" (玻璃纖維增強熱固性樹脂)耐腐蝕管和配件規范 | Specification for Contact-Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings |
| ANSI/ASTM D706-1996 | 醋酸纖維素模壓和擠壓成形化合物規范 | Specification for Cellulose Acetate Molding and Extrusion Compounds |
| ANSI/ASTM D707-1996 | 醋酸-丁酸纖維素模壓和擠壓成形化合物規范 | Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds |
| ANSI/ASTM D731-1995 | 熱固模壓粉模壓系數的試驗方法 | Test Method for Molding Index of Thermosetting Molding Powder (08.01) |
| ANSI/AWWA F101-2002 | 接觸模壓玻璃纖維增強的塑料洗滌水槽和槽洗機 | Contact Molded, Fiberglass Reinforced Plastic Washwater Troughs and Launders |
| ANSI/AWWA F101a-1996 | 接觸模壓制的玻璃纖維增強的塑料洗滌水槽和槽洗機 Contact-Molded, | Fiberglass-Reinforced Plastic Wash Water Troughs and Launders |
| ANSI/AWWA F102-2002 | 配對硬模壓塑玻璃纖維增強的塑料堰板、浮渣檔板和安裝托架 | Matched-Die Molded, Fiberglass Reinforced Plastic Weir Plates, Scum Baffles, and Mounting Brackets |
| ANSI/EIA-540GA00-1993 | 電子設備用帶模壓載體環的片式載體封裝燒進插座的空白詳細規范 | Blank Detail Specification for Burn-In Socket for Chip Carrier Packages with Molded Carrier Rings for Use in Electronic Equipment |
| ANSI/EIA-540GAAA-1993 | 電子設備用帶模壓載體環的片式載體封裝燒進插座的詳細規范 | Detail Specification for Burn-In Sockets for Chip Carrier Packages with Molded Carrier Rings for Use with Electronic Equipment |
| ANSI/SPI B151.15-2003 | 擠壓吹塑模壓機的建造、保養和使用 | Extrusion Blow Molding Machines, Construction, Care, and Use of |
| ASTM C 582-2002 | 耐腐蝕設備用接觸模壓的增強熱塑性層壓材料標準規范 | Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment |
| ASTM D 3275-2005 | E-CTFE-氟塑料模壓、擠壓和涂覆材料的標準分類系統 | Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials |
| ASTM D 3293-1991 | 聚四氟乙烯樹脂模壓薄板 | PTFE Resin Molded Sheet |
| ASTM D 3294-2003 | 聚四氟乙烯樹脂模壓薄板和基本模壓型材的標準規范 | Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes |
| ASTM D 3982-2003 | 接觸模壓制玻璃纖維增強熱固性樹脂管和防護罩標準規范 | Standard Specification for Contact Molded "Fiberglass" (Glass Fiber Reinforced Thermosetting Resin) Duct and Hoods |
| ASTM D 4020-2005 | 超高分子量聚乙烯模壓和擠壓材料的標準規范 | Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials |
| ASTM D 4097-2001 | 接觸模壓的玻璃纖維增強熱固樹脂耐腐蝕罐標準規范 | Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
| ASTM D 4549-2003 | 聚苯乙烯和橡膠改良的聚苯乙烯模壓和擠壓材料(PS)的標準規范 | Standard Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS) |
| ASTM D 4673-2002 | 丙烯腈-丁二烯-苯乙烯(ABS)塑料及合金模壓和擠壓材料的標準分類系統 | Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials |
| ASTM D 494-2004 | 酚醛模壓或?qū)訅寒a(chǎn)品的丙酮萃取標準試驗方法 | Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products |
| ASTM F 610/F 610Ma-2000 | 通過熱轉換技術評定模壓聚氯乙烯(PVC)塑料管配件質量的標準試驗方法 | Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique |
| BS 1133-7.6-1988 | 包裝規程.第7節:紙和紙板包裝物、袋和包裝箱.第6小節:模壓紙漿包裝 | Packaging code - Paper and board wrappers, bags and containers - Moulded pulp packaging |
| BS 2782-9 Method 901A-1988 | 塑料試驗方法.第9部分:取樣和試樣制備.試驗方法901A:熱塑性材料模壓試樣 | Methods of testing plastics - Sampling and test specimen preparation - Compression moulding test specimens of thermoplastic materials |
| BS 2PL 1-1966 | 航空用酚醛模壓件規范 | Specification for phenolic mouldings for aeronautical purposes |
| BS 4361-13-1988 | 木工機械.第13部分:兩面、三面和四面模壓機床規范 | Woodworking machines - Specification for two-, three- and four-side moulding machines |
| BS 4361-6-1988 | 木工機械.第6部分:單軸模壓機床規范 | Woodworking machines - Specification for single spindle moulding machines |
| BS 5131-5.1-1991 | 鞋靴和鞋靴材料試驗方法.第5部分:成品鞋靴試驗.第1節:粘膠外底和模壓外底粘合力 | Methods of test for footwear and footwear materials - Testing of complete footwear - Adhesion of stuck-on and moulded-on soles |
| BS 5131-5.2-1991 | 鞋靴和鞋靴材料試驗方法.第5部分:成品鞋靴試驗.第2節:模壓橡膠外底硫化度 | Methods of test for footwear and footwear materials - Testing of complete footwear - Degree of vulcanization of moulded-on rubber soles |
| BS 7010-1988 | 塑料模壓件尺寸公差系統的實用規程 | Code of practice for a system of tolerances for the dimensions of plastics mouldings |
| BS 7805-2-1997 | 模壓環形槽鉚釘.尺寸在12.7mm至34.9mm(含)之間的鉚釘規范 | Swaged collar grooved rivets - Specification for sizes from 12.7 mm up to and including 34.9 mm |
| BS 9524-1984 | 直流和低頻用經質量評估的模壓體矩形電氣連接器詳細規范的制定規則.全面和基本評估級 | Rules for the preparation of detail specifications for rectangular electrical connectors of assessed quality with moulded bodies for d.c. and low frequency applications - Full and basic assessment levels |
| BS EN 14598-1-2005 | 增強熱固性模塑化合物.模壓塑料板材(SMC)和模塑料塊(BMC)的規范.名稱與符號 | Reinforced thermosetting moulding compounds - Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) - Designation |
| BS EN 14598-2-2005 | 增強熱固性模壓復合物.模壓塑料板材(SMC)和模塑料塊(BMC)規范.試驗方法和一般要求 | Reinforced thermosetting moulding compounds - Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) - Part 2: Methods of test and general requirements |
| BS EN 14598-3-2005 | 增強熱固性模塑化合物.模壓塑料板材(SMC)和模塑料塊(BMC)的規范.特殊要求 | Reinforced thermosetting moulding compounds - Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) - Specific requirements |
| BS EN 2374-1991 | 玻璃纖維加強的模壓件和夾層復合材料.試驗板的生產 | Specification for glass fibre reinforcing mouldings and sandwich composites - Production of test panels |
| BS EN 60371-3-9-1996 | 云母基絕緣材料規范.單項材料規范.模壓成形的人造云母 | Specification for insulating materials based on mica - Specifications for individual materials - Moulding micanite |
| BS EN 60664-3-2003 | 低壓系統內設備的絕緣配合.防污染用涂覆、灌封和模壓的應用 | Insulation coordination for equipment within low-voltage systems - Use of coating, potting or moulding for protection against pollution |
| BS EN 61029-2-8-2003 | 移動式電動工具的安全.單芯軸垂直模壓機的特殊要求 | Safety of transportable motor-operated tools - Particular requirements for single spindle vertical moulders |
| BS EN 61234-2-1998 | 電絕緣材料水解穩定性試驗方法.模壓熱固性 | Method of test for hydrolytic stability of electrical insulating materials - Moulded thermosets |
| BS EN 61837-1-1999 | 頻率控制和選則用表面安裝的壓電器件.標準外形和終端引線的連接.塑性模壓外殼外形 | Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Plastic moulded enclosure outlines |
| BS EN 848-1-1999 | 木工機械的安全性.帶旋轉工具的單面模壓機.單軸立式模壓機 | Safety of woodworking machines - One side moulding machines with rotating tool - Single spindle vertical moulding machines |
| BS EN 848-2-1999 | 木工機械的安全性.帶旋轉工具的單邊模壓機.單軸手工進料/綜合進料靠模銑床 | Safety of woodworking machines - One side moulding machines with rotating tool - Single spindle handfed/integrated fed routing machines |
| BS EN ISO 11667-1998 | 纖維增強塑料.模壓化合物和聚酯膠片.樹脂、增強的纖維和礦物填料含量的測定.溶解方法 | Fibre reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforcement-fibre and mineral-filler content - Dissolution methods |
| BS EN ISO 4613-1-1999 | 塑料.醋酸乙烯/乙烯酯(E/VAC)模壓和擠壓材料.標示和規范 | Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Designation and specification |
| BS EN ISO 527-2-1994 | 塑料.拉伸性能測定.第2部分:模壓和擠壓塑料試驗條件 | Plastics - Determination of tensile properties - Test conditions for moulding and extrusion plastics |
| BS ISO 11667-1998 | 纖維增強塑料.模壓化合物和聚酯膠片.樹脂、增強纖維和礦物填料含量測定.溶解方法 | Fibre reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforcement-fibre and mineral-filler content. Dissolution methods |
| BS ISO 1268-2-2001 | 纖維增強塑料.試驗板的制備方法.接觸模壓法和噴射成形法 | Fibre-reinforced plastics - Methods of producing test plates - Contact and spray-up moulding |
| BS ISO 15600-2000 | 模壓工具.注塑模具的隔熱板 | Tools for moulding - Thermal insulating sheets for injection moulds |
| BS ISO 5834-2-1998 | 外科用植入物.超高分子量聚乙烯.模壓成型 | Implants for surgery - Ultra-high molecular weight polyethylene - Moulded forms |
| BS ISO 6753-2-1998 | 模壓工具.機加工金屬板.第2部分:模具用機加工金屬板 | Tools for pressing and moulding - Machined plates - Machined plates for moulds |
| BS L 161-1976 | 規范.鋁-鋅(5.6)-鎂(2.5)-銅(1.6)-鋯(0.22)合金手工鍛件和模壓鍛件(溶液處理和人工時效至過老化條件) | Specification - Hand and die forgings of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22) |
| DIN 1687-3-1980 | 重金屬合金的毛坯鑄件.第3部分:重力模壓鑄件的一般公差及加工余量 | Rough castings of heavy metal alloys; gravity die castings, general tolerances, machining allowances |
| DIN 16901-1982 | 塑料模壓件:線性尺寸的公差和驗收條件 | Plastics mouldings; Tolerances and acceptance conditions for linear dimensions |
| DIN 29880-1989 | 航空航天.聚碳酸酯(PC)的半成品和模壓件.技術規范 | Aerospace; polycarbonate (PC) semi-finished products and moulded parts; technical specification |
| DIN 40616-1967 | 層壓制品.紙基層壓或織物層壓的模壓方形管 | Laminated Products; Compression Moulded Square Tubes of Paper-base Laminate or Fabric-base Laminate |
| DIN 40617-1967 | 層壓制品.紙基層壓或織物層壓的模壓六角形管 | Laminated Products; Compression Moulded Hexagon Tubes of Paper-base Laminate or Fabric-base Laminate |
| DIN 40618-1971 | 層壓制品.紙基或織物基層壓矩形截面的模壓管 | Laminated Products; Laminated Moulded Tubes of Rectangular Cross-section, Paper-base Laminate or Fabric-base Laminate |
| DIN 43857-3-1974 | 安裝在最大額定電流可達 60 A 的無儀表變壓器模壓絕緣外殼的瓦時計.第3部分:單相計終端電度表蓋的主要尺寸 | Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for single-phase meters |
| DIN 43857-4-1974 | 安裝在最大額定電流可達 60 A 的無儀表變壓器模壓絕緣外殼的瓦時計.第4部分:多相計終端電度表蓋的主要尺寸 | Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for poly-phase meters |
| DIN 43857-5-1998 | 最大額定電流在60A以下無儀表變壓器的模壓殼體的電度表.第5部分.端子蓋的主要尺寸 | Watthour meters in moulded case without instrument transformers up to 60 A rated maximum current - Part 5: Principal dimensions for terminal cover |
| DIN 53380-3-1998 | 測定塑料的氣體傳輸率.第1部分:測定塑料薄膜和塑料模壓品載氧率測量法 | Testing of plastics - Determination of gas transmission rate - Part 3: Oxygen-specific carrier gas method for testing of plastic films and plastics mouldings |
| DIN 53464-1962 | 塑料的試驗.熱固性模壓材料制模壓件的收縮特性的測定 | Testing of Plastics; Determination of Shrinkage Properties of Moulded Materials from Thermosetting Moulding Materials |
| DIN 53465-1963 | 塑料檢驗.熱固性模壓塑料閉合時間的測定 | Testing of Plastics; Determination of the Closing Time of Thermosetting Compression Moulding Materials |
| DIN 53470-1951 | 模壓材料的檢驗.制造熱固模壓塑料標準試樣的壓模 | Testing of Compression Moulding Materials; Compression Mould for the Production of Standard Specimens of Thermosetting Compression Moulding Materials |
| DIN 53498-1967 | 塑料的檢驗.熱固性模壓塑料的壓制件熱貯存 | Testing of Plastics; Heat Storage of Compression Mouldings Made of Thermosetting Compression Moulding Materials |
| DIN 53499-1974 | 塑料的檢驗.熱固性模塑材料模壓制品的煮沸試驗 | Testing of plastics; boiling test of moulded articles made of thermosetting moulding materials |
| DIN 65321-1989 | 航空航天.聚丙烯薄板材，方格板和模壓件.技術規范 | Aerospace; acrylic sheets, panes and moulded parts; technical specification |
| DIN 65373-1989 | 航空航天.聚酰胺(PA)的半成品和模壓件.技術規范 | Aerospace; polyamide (PA) semi-finished products and moulded parts; technical specification |
| DIN 65374-1989 | 航空航天.聚四氟乙烯.(PTFE)半成品和模壓件.技術規范 | Aerospace; polytetrafluoroethylene (PTFE) semi-finished products and moulded parts; technical specification |
| DIN 8836-1-1978 | 木材加工機械.第1部分:空載模壓主軸、尺寸 | Woodworking machines; loose moulding spindles, sizes |
| DIN EN 12576-1998 | 塑料.纖維增強的復合材料.SMC,BMC和DMC制模壓試驗板件的備制 | Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMC and DMC; German version EN 12576:1998 |
| DIN EN 14598-1-2005 | 增強熱固性模塑復合物.模壓塑料板材(SMC)和模塑料塊(BMC)的規范.第1部分:名稱與符號 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation; German version EN 14598-1:2005 |
| DIN EN 14598-2-2005 | 增強熱固性模塑復合物.模壓塑料板材(SMC)和模塑料塊(BMC)的規范.第2部分:試驗方法和一般要求 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements; German version EN 14598-2:2005 |
| DIN EN 14598-3-2005 | 增強熱固性模塑復合物.模壓塑料板材(SMC)和模塑料塊(BMC)的規范.第3部分:特殊要求 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements; German version EN 14598-3:2005 |
| DIN EN 2374-1991 | 航空航天.玻璃纖維增強的模壓件和夾芯復合材料.試驗板的生產 | Aerospace series; glass fibre-reinforced mouldings and sandwich composites; production of test panels; german version EN 2374:1991 |
| DIN EN 422-1995 | 橡膠和塑料機械.安全性.空心件生產用模壓鼓風機.設計和建造要求; 德文版本 EN 422:1995 | Rubber and plastics machines; safety - Blow moulding machines intended for the production of hollow articles - Requirements for the design and construction; German version EN 422:1995 |
| DIN EN 61029-2-8-2004 | 移動式電動工具的安全.第2部分:單芯軸垂直模壓機的特殊要求 | Safety of transportable motor-operated electric tools - Part 2: Particular requirements for single spindle vertical moulders (IEC 61029-2-8:1995 + A1:1999 + A2:2001, modified); German version EN 61029-2-8:2003 |
| DIN EN 61212-3-2-1996 | 電工用工業剛性熱固樹脂層壓管和棒材.第3部分:各型材料規范.第2節:圓型模壓管 | Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials; Sheet 2: Round laminated moulded tubes (IEC 61212-3-2:1995); German version EN 61212-3-2:1995 |
| DIN EN 61212-3-3-1996 | 電工用工業剛性熱固樹脂層壓管和棒材.第3部分:各型材料規范.第3節:圓型模壓棒 | Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials; Sheet 3: Round laminated moulded rods (IEC 61212-3-3:1995); German version EN 61212-3-3:1995 |
| DIN EN 61837-1-1999 | 頻率控制和選擇用表面安裝的壓電器件.標準外形和終端引線的連接.第1部分:塑料模壓外殼外形 | Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 1: Plastic moulded enclosure outlines (IEC 61837-1:1999); German version EN 61837-1:1999 |
| DIN EN 714-1994 | 熱塑管道系統.壓力管道和模壓管件之間無末端承載的橡膠密封圈連接件.無端部拉力的流體靜力內壓力下的密封性 | Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings - Test method for leaktightness under internal hydrostatic pressure whithout end thrust; German version EN 714:1994 |
| DIN EN 848-1/A1-2001 | 木材加工機械安全性.旋轉工具單面模壓機械.第1部分:單軸垂直模壓機械.修改件A1 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines; Amendment A1; German version EN 848-1:1998/A1:2000 |
| EN 121-1991 | 低吸水性的模壓陶瓷瓷磚（E≤3%） A1組 | Extruded ceramic tiles with low water absorption (E ≤ 3 %); group A 1 |
| EN 12203-2003 | 鞋襪、皮革和人造革制品加工機械 鞋和皮革模壓機 安全要求 | Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements |
| EN 13677-1-2003 | 加強熱塑性模壓合成物 GMT規范 第1部分：命名 | Reinforced thermoplastic moulding compounds - Specification for GMT - Part 1: Designation |
| EN 13677-2-2003 | 加強熱塑性模壓合成物 GMT規范 第2部分：試驗方法和一般要求 | Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements |
| EN 13677-3-2003 | 加強熱塑性模壓合成物 GMT規范 第3部分：特殊要求 | Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements |
| EN 1612-2-2000 | 橡膠和塑料機械 反應模塑機械 第2部分：反應模壓車間的安全要求 | Rubber and plastics machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant |
| EN 2374-1991 | 航空航天系列 玻璃纖維增強模壓件和夾層復合件 試驗板的制備 | Aerospace series - Glass fibre reinforced mouldings and sandwich composites - Production of test panels |
| EN 61837-1-1999 | 頻率控制和選擇用表面安裝的壓電器件 標準外形和端頭連接 第1部分：塑料模壓外殼外形 | Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 1: Plastic moulded enclosure outlines (IEC 61837-1:1999) |
| EN ISO 12114-1997 | 纖維增強塑料 熱固性模壓塑料和預浸料 固化特性的測定 | Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics (ISO 12114:1997) |
| EN ISO 12115-1997 | 纖維增強塑料 熱固性模壓塑料和預浸料 流動性、熟化期和適用期的測定 | Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life (ISO 12115:1997) |
| EN ISO 14233-2003 | 牙科學 聚合物基模壓材料 | Dentistry - Polymer-based die materials (ISO 14233:2003) |
| EN ISO 527-2-1996 | 塑料 拉伸性能的測定 第2部分：模壓和擠壓塑料試驗條件 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:1993 including Corr 1:1994) |
| EN ISO 61-1999 | 塑料 不能用漏斗注入的模壓材料表觀密度的測定 | Plastics - Determination of apparent density of moulding material that cannot be poured from a specified funnel (ISO 61:1976) |
| GB 20265-2006 | 耐化學品的工業用模壓塑料靴 | Moulded plastics industrial boots with chemical resistance |
| GB/T 15105.1-2006 | 模壓刨花制品第1部分：室內用 | Molding articles from wood particle Part 1: Interior use |
| GB/T 16935.3-2005 | 低壓系統內設備的絕緣配合 第3部分：利用涂層、罐封和模壓進行防污保護 | Insulation coordination for equipment within low-voltage systems Part 3:Use of coating,potting or moulding for protection against pollution |
| GB/T 20467-2006 | 軟質泡沫聚合材料 模壓和擠出海綿膠制品 成品的壓縮性能試驗 | Flexible cellular polymeric materials - Moulded and extruded sponge or expanded cellular rubber products - Compressibility test on finished parts |
| GB/T 5169.19-2006 | 電工電子產品著火危險試驗 第19部分：非正常熱模壓應力釋放變形試驗 | Fire hazard testing for electric and eletronic products - Part 19: Abnormal heat - Mould stress relief distortion test |
| HG/T 3090-1987 | 模壓和壓出橡膠制品外觀質量的一般規定 | () |
| IEC 61029-2-8 AMD 1-1999 | 移動式電動工具的安全 第2-8部分:單芯軸垂直模壓機的特殊要求 修改1 | Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders; Amendment 1 |
| IEC 61029-2-8 AMD 2-2001 | 移動式電動工具的安全 第2-8部分:單芯軸垂直模壓機的特殊要求 修改2 | Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders; Amendment 2 |
| IEC 61029-2-8-1995 | 移動式電動工具的安全 第2-8部分:單芯軸垂直模壓機的特殊要求 | Safety of transportable motor-operated electric tools - Part 2: Particular requirements for single spindle vertical moulders |
| IEC 61837-1-1999 | 頻率控制和選擇用表面安裝的壓電器件 標準外形和端頭連接 第1部分:塑料模壓外殼外形 | Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 1: Plastic moulded enclosure outlines |
| ISO 12114-1997 | 纖維增強塑料 熱固性模壓塑料和預浸料 固化特性的測定 | Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics |
| ISO 12115 Technical Corrigendum 1-1998 | 纖維增強塑料 熱固性模壓塑料和預浸料 流動性、熟化期和適用期的測定 技術勘誤1 | Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life; Technical Corrigendum 1 |
| ISO 12115-1997 | 纖維增強塑料 熱固性模壓塑料和預浸料 流動性、熟化期和適用期的測定 | Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life |
| ISO 4643-1992 | 模壓塑料鞋 工業用有襯里和無襯里聚乙烯鞋 規范 | Moulded plastics footwear; lined or unlined poly(vinyl choride) boots for general industrial use; specification |
| ISO 527-2-1993 | 塑料 拉伸性能的測定 第2部分:模壓和擠壓塑料試驗條件 | Plastics; determination of tensile properties; part 2: test conditions for moulding and extrusion plastics |
| ISO 527-2:1993 Technical Corrigendum 1-1994 | 塑料 拉伸性能的測定 第2部分:模壓和擠壓塑料試驗條件 技術勘誤1 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics - Technical Corrigendum 1 |
| ISO 5423-1992 | 模壓塑料鞋 工業用有襯里或無襯里聚酯鞋 規范 | Moulded plastics footwear; lined or unlined polyurethane boots for general industrial use; specification |
| ISO 61-1976 | 塑料 不能用專用漏斗注入的模壓材料表觀密度的測定 | Plastics; Determination of apparent density of moulding material that cannot be poured from a specified funnel |
| JIS B6471-1987 | 閉模壓力機鍛造用模塊 型鍛造プレス用ダイブロック | Die blocks for closed-die press forging |
| NF C20-040-3-2003 | 低壓系統內設備的絕緣配合.第3部分:防污染用涂覆、封裝或模壓的使用 | (Insulation coordination for equipment within low-voltage systems - Part : use of coating, potting or moulding for protection against pollution.) |
| NF C96-628-1-2000 | 頻率控制和選則用表面安裝的壓電器件.標準外形和終端引線的連接.第1部分:塑料模壓外殼外形 | (Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 1 : plastic moulded enclosure outlines.) |
| NF E04-131-1995 | 技術制圖.模壓、鑄壓和鍛壓件的簡單表示法 | (Technical drawings. Simplified representation of moulded, cast and forged parts.) |
| NF E63-510-1994 | 模壓工具.澆道套.尺寸 | (Tools for moulding. Sprue bushes. Dimensions.) |
| NF E63-518-1992 | 模壓工具.支承柱 | (Tools for moulding. Support pillars.) |
| NF E82-000-1984 | 模壓模鍛鍛造.詞匯 | (DROP AND DIE FORGING. VOCABULARY.) |
| NF E82-001-1984 | 模壓鍛造零件.拉緊裝置用燈.規范 | (Drop forgings. Turnbuckles. Requirements.) |
| NF E82-020-1984 | 模壓鍛造零件.拉緊裝置用燈的螺釘.規范 | (DROP FORGINS. EYEBOLTS FOR TURNBUCKLES. REQUIREMENTS.) |
| NF F00-071-1990 | 通用鐵路器材.密實橡膠制模壓件 | (GENERAL RAILWAY EQUIPMENT. COMPACT-RUBBER CAST PARTS.) |
| NF S93-113-1993 | 注射容器及附件.第4部分:模壓玻璃注射瓶 | (Injection containers for injectables and accessories. Part 4 : injection vials made of moulded glass.) |
| NF T50-007-1-1999 | 塑料.聚丁烯(PB)模壓和擠制材料.第1部分:命稱與符號和規范的基礎 | (PLASTICS. POLYBUTENE (PB) MOULDING AND EXTRUSION MATERIALS. PART 1 : DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS. (EUROPEAN STANDARD EN ISO 8986-1).) |
| NF T51-034-2-1996 | 塑料.拉伸性能測定.第2部分:模壓和擠壓塑料試驗條件 | (Plastics. Determination of tensile properties. Part 2 : test conditions for moulding and extrusion plastics.) |
| NF T57-153-2-2002 | 纖維增強塑料.試驗板的生產方法.第2部分:接觸模壓法和噴射成形法 | (Fibre-reinforced plastics - Methods of producing test plates - Part 2 : contact and spray-up moulding.) |
| NF T57-608-1999 | 纖維增強塑料.模壓化合物和聚酯膠片.樹脂、增強纖維和礦物填料含量的測定.溶解方法 | (Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforced-fibre and mineral-filler content. Dissolution methods.) |
| SD 242-1987(2005) | 交流電動機定子模壓磁性槽楔基本技術條件 | () |
| SD 243-1987(2005) | 交流電動機定子模壓磁性槽楔裝配工藝導則 | () |
| prEN 14294-2001 | 皮革和制鞋材料用粘合劑 用模壓處理制備粘結試片 | Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes |
| prEN 2382-1998 | 航空航天系列 AL-P2214-T6鋁合金 a 100 mm手工和模壓鍛件 | Aerospace series - Aluminium alloy AL-P2214-T6 - Hand and die forgings a 100 mm |
| prEN 2383-1998 | 航空航天系列 AL-P2214-T4鋁合金 a 100 mm手工和模壓鍛件 | Aerospace series - Aluminium alloy AL-P2214-T4 - Hand and die forgings a 100 mm |
| prEN 3335-1999 | 航空航天系列 鋁合金 AL-P7475-O2 0,8 mm≤a≤6 mm超塑性模壓板材 | Aerospace series - Aluminium alloy AL-P7475-O2 - Sheet for superplastic forming (SPF) 0,8 mm a 6 mm |
| prEN 3354-1998 | 航空航天系列 退火鈦合金 TI-P64001 a≤6 mm超塑性模壓薄板 | Aerospace series - Titanium alloy TI-P64001, annealed - Sheet for superplastic forming a 6 mm |
| prEN 61029-2-8-2002 | 移動式電動工具的安全 第２－８部分：單芯軸垂直模壓機的特殊要求 | Safety of transportable motor-operated electric tools - Part 2: Particular requirements for single spindle vertical moulders (IEC 61029-2-8:1995 + A1:1999 + A2:2001, modified) |
| 編號 | 中文名稱 | 英文名稱 |