| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| GB 18145-2003 | 陶瓷片密封水嘴 | Ceramic cartridge faucets |
| GB/T 8375-1987 | 水嘴分類、型號命名方法 | Classification and type nomenclature for taps |
| ANSI/ASAE S436.1-1997 | 裝有噴霧器和噴嘴的中心旋轉軸、彎頭旋轉軸和橫向移動的灌溉機噴水均勻性測定試驗程序 | Test Procedure for Determining the Uniformity of Water Distribution of Center Pivot, Corner Pivot, and Moving Lateral Irrigation Machines Equipped with Spray or Sprinkler Nozzles |
| ANSI/ASME MFC-3M-1-2004 | 用孔板、噴嘴和文杜利流量計測量管道中液體流量.第1部分:總則 | Measurement of fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 1-General |
| ANSI/ASME MFC-3M-2-2004 | 用孔板、噴嘴和文杜利流量計測量管道中液體流量.第2部分:孔板 | Measurement of fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 2-Orifice Plates |
| ANSI/ASME MFC-3M-3-2004 | 用孔板、噴嘴和文杜利流量計測量管道中液體流量.第3部分:噴嘴和文杜利噴嘴 | Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 3 - Nozzles and Venturi Nozzles |
| ANSI/ASME MFC-3M-4-2004 | 用孔板、噴嘴和文杜利流量計測量管道中液體流量.第4部分:文杜利流量計 | Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi - Part 4 - Venturi Meters |
| ANSI/ASME MFC-7M-1987 | 利用臨界文氏流量噴嘴測量氣體流量 | Gas Flow by Means of Critical Flow Venturi Nozzles, Measurement of |
| ANSI/ASTM F1601-2001 | 中央真空吸塵系統家用電動管嘴馬達壽命評估試驗方法 | Test Method for Motor Life Evaluation of a Household Electric Motorized Nozzle for Central Vacuum Cleaning System |
| ANSI/ASTM F1692-2001 | 家庭中央真空吸塵系統渦輪動力噴嘴壽命評估試驗方法 | Test Method for Life Evaluation of aTurbine Powered Nozzle for Household Central Vacuum Cleaning Systems |
| ANSI/AWS C4.5M-2006 | 氧化燃料噴嘴的統一命名系統 | Uniform Designation System for Oxyfuel Nozzles |
| ANSI/AWWA C708-2005 | 多噴嘴式冷水表 | Cold-Water Meters - Multijet Type |
| ANSI/HI 9.6.2-2001 | 離心泵和立式泵.最大噴嘴負荷 | Centrifugal and Vertical Pumps for Allowable Nozzle Loads |
| ANSI/NFPA 1962-2003 | 消防水龍帶包括接頭和噴嘴的保養、使用和維修試驗 | Care, Use, and Service Testing of Fire Hose, Including Couplings and Nozzles |
| ANSI/NFPA 1964-2003 | 噴嘴(關閉閥和端頭) | Spray Nozzles (Shutoff and Tip) |
| ANSI/UL 2167-2004 | 消防設備用水霧噴嘴的安全標準 | Standard for Safety for Water Mist Nozzles for Fire-Protection Service |
| ANSI/UL 2351-2004 | 防火用噴嘴的安全標準 | Standard for Safety for Spray Nozzles for Fire-Protection Service |
| ANSI/UL 401-2004 | 防火服務用便攜式噴霧軟管噴嘴的安全標準 | Standard for Safety for Portable Spray Hose Nozzles for Fire-Protection Service (bulletin dated February 16, 2004) |
| ASME MFC-7M-1987 | 用極限流量文氏噴嘴測量氣體流量 | (Measurement of gas flow by means of critical flow Venturi nozzles) |
| ASTM C 605-1992 | 耐火粘土制噴嘴和套管的二次加熱變化的試驗方法 | Test Method for Reheat Change of Fireclay Nozzles and Sleeves |
| ASTM E 641-2001 | 農用液壓噴嘴的試驗的標準方法 | Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture |
| ASTM F 1413-1992 | 漏油分散設備:起重臂和噴油嘴系統 | Oil Spill Dispersant Application Equipment: Boom and Nozzle Systems |
| ASTM F 1460-1993 | 溢油分散劑噴灑設備噴桿和噴嘴系統校準的標準規范 | Standard Practice for Calibrating Oil Spill Dispersant Application Equipment Boom and Nozzle Systems |
| BS 1486-1-1959 | 潤滑脂管嘴.第1部分:機械與車輛用潤滑脂管嘴和適配器 | Lubricating nipples - Lubricating nipples and adaptors for use on machinery and vehicles |
| BS 1486-2-1961 | 潤滑脂管嘴.重型潤滑脂管嘴 | Lubricating nipples - Heavy duty lubricating nipples |
| BS 1486-4-1981 | 潤滑脂管嘴規范.第4部分:液壓潤滑脂管嘴規范 | Lubricating nipples - Specification for hydraulic grease nipples |
| BS 2C 13-1988 | 飛機重力灌注燃油口及相關供燃油嘴的尺寸規范(米制系列) | Specification for sizes of aircraft gravity filling orifices and associated replenishment nozzles (metric series) |
| BS 5041-1-1987 | 消防栓系統設備.第1部分:濕式水嘴接地閥規范 | Fire hydrant systems equipment - Specification for landing valves for wet risers |
| BS 5041-2-1987 | 消防栓系統設備.第2部分:干式水嘴接地閥規范 | Fire hydrant systems equipment - Specification for landing valves for dry risers |
| BS 5041-4-1975 | 消防栓系統設備.第4部分:干式水嘴用接地閥箱規范 | Fire hydrant systems equipment - Specification for boxes for landing valves for dry risers |
| BS 5041-5-1974 | 消防栓系統設備.第5部分:泡沫入口及干式水嘴用箱規范 | Fire hydrant systems equipment - Specification for boxes for foam inlets and dry riser inlets |
| BS 6356-1-1997 | 農作物防護用噴霧設備.第1部分:噴嘴試驗方法 | Spraying equipment for crop protection - Method of test for sprayer nozzles |
| BS 6356-13-1997 | 農作物保護噴霧設備.第13部分:氣動噴霧器:噴嘴旋軸螺母尺寸 | Spraying equipment for crop protection - Air-assisted sprayers - Dimensions of nozzle swivel nuts |
| BS 6356-2-1985 | 農作物防護用噴霧設備.第2部分:噴嘴與壓力計連接尺寸規范 | Spraying equipment for crop protection - Specification for connecting dimensions for nozzles and manometers |
| BS 6356-4-1989 | 農作物保護用噴霧設備.第4部分:田間噴嘴性能極限規范 | Spraying equipment for crop protection - Specification for performance limits for field spraying nozzles |
| BS 6356-6-1992 | 農作物保護用噴霧設備.第6部分:帶插接固定裝置噴嘴連接尺寸規范 | Spraying equipment for crop protection - Specification for connecting dimensions for nozzles with bayonet fixing |
| BS 6913-13-1997 | 運土機械的操作和維修.潤滑油配件規范.油嘴類型 | Operation and maintenance of earth-moving machinery - Specification for lubrication fittings - Nipple type |
| BS 6913-14-1997 | 運土機械的操作和維修.潤滑油配件規范.注油搶噴嘴 | Operation and maintenance of earth-moving machinery - Specification for lubrication fittings - Grease-gun nozzles |
| BS EN 12067-1-1999 | 燃氣噴嘴和燃氣裝置用燃氣/空氣混合調節器.第1部分:氣動結構類型 | Gas/air ratio controls for gas burners and gas burning appliances - Pneumatic types |
| BS EN 12094-7-2001 | 固定消防系統.氣體滅火系統元件.CO2系統用噴嘴的要求和試驗方法 | Fixed firefighting systems - Components for gas extinguishing systems - Requirements and test methods for nozzles for CO2 systems |
| BS EN 13079-2003 | 防飲用水回流造成污染的設備.有噴嘴的氣隙.A類.D型 | Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A. Type D |
| BS EN 13760-2003 | 輕型和重型車輛用機動車液化石油氣填充系統.噴油嘴試驗要求和尺寸 | Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions |
| BS EN 293-1992 | 油壓力霧化噴嘴.最低要求.試驗 | Specification for oil pressure atomizing nozzles - Minimum requirements - Testing |
| BS EN 299-1999 | 油壓霧化噴嘴.角度和噴射特性的測定 | Oil pressure atomizing nozzles - Determination of the angle and spray characteristics |
| BS EN 303-6-2000 | 供暖鍋爐.帶強制通風燃燒嘴器的供暖鍋爐.標稱熱輸入量不超過70kw的用霧化油燃燒爐的組合式鍋爐的家用熱水供 | Heating boilers - Heating boilers with forced draught burners - Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW |
| BS EN 303-6-2000 | 供暖鍋爐.帶強制通風燃燒嘴器的供暖鍋爐.標稱熱輸入量不超過70kw的用霧化油燃燒爐的組合式鍋爐的家用熱水供 | Heating boilers - Heating boilers with forced draught burners - Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW |
| BS EN 625-1996 | 裝有常壓送風噴嘴的燃氣集中供暖鍋爐.公稱熱輸入量不超過70kW的混合鍋爐的家庭熱水供暖的具體要求 | Gas-fired central heating boilers - Specific requirements for the domestic hot water operation of combination boilers of nominal heat input not exceeding 70 kW |
| BS EN ISO 11545-2001 | 農業灌溉設備.有噴嘴或噴霧咀的橫向移動排灌機械和中心軸.水分配均勻性的測定 | Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution |
| BS EN ISO 15029-1-2000 | 石油和相關產品.耐火液體噴射點燃特性的測定.噴射火焰持久性.空心錐形噴嘴法 | Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Spray flame persistence - Hollow-cone nozzle method |
| BS EN ISO 20844-2004 | 石油和相關產品.使用柴油注射器噴嘴測定含聚合物油的剪切穩定性 | Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle |
| BS EN ISO 5167-3-2003 | 用插入圓截面管道中的壓差裝置測量流體流量.噴嘴和文杜利噴嘴 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Nozzles and Venturi nozzles |
| BS EN ISO 9300-2005 | 用臨界流量文丘里噴嘴測定氣體流量 | Measurement of gas flow by means of critical flow Venturi nozzles |
| BS G 175-1959 | 航空用燃油嘴接地插頭和插座 | Aircraft fuel nozzle grounding plugs and sockets |
| BS ISO 14681-1998 | 柴油發動機.燃料噴射泵試驗.燃料噴嘴的校準 | Diesel engines - Fuel injection pump testing - Calibrating fuel injectors |
| BS ISO 2697-2000 | 柴油發動機.燃料噴嘴."S"尺寸 | Diesel engines - Fuel nozzles - Size "S" |
| BS ISO 4010-1998 | 柴油發動機.針栓型滯后校準噴嘴 | Diesel engines - Calibrating nozzle, delay pintle type |
| BS ISO 7026-1998 | 柴油發動機.S1規格B型針栓式噴嘴的20、21、21.1和27型擰入式噴嘴固定器 | Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size 'S1' type 'B' |
| BS ISO 9102-1998 | 柴油發動機.24、25、26和26.1型擰入式噴嘴底座 | Diesel engines - Screw-in injection nozzle holders types 24, 25, 26 and 26.1 |
| BS ISO TR 15377-1998 | 用壓差裝置測量流體流量.ISO 5167-1規定范圍之外的噴嘴和節流孔板規范指南 | Measurement of fluid flow by means of pressure differential devices - Guidelines for specification of nozzles and orifice plates beyond the scope of ISO 5167-1 |
| DD ENV 1259-1-1994 | 燃氣式單噴嘴裝于頂部的幅射管加熱器和非家用燃氣式裝于頂部的發光幅射加熱器.制定合理使用能源的要求和試 | Single burner gas fired overhead radiant tube heaters and non-domestic gas-fired overhead luminous radiant heaters. Requirements and test methods for establishing the rational use of energy. Radiometric method A |
| DD ENV 1259-2-1997 | 燃氣式單噴嘴裝于頂部的幅射管加熱器和非家用燃氣式裝于頂部的發光幅射加熱器.建立合理使用能源的要求和試 | Single burner gas fired overhead radiant tube heaters and non-domestic gas-fired overhead luminous radiant heaters. Requirements and test methods for establishing the rational use of energy. Radiometric method B |
| DD ENV 1259-3-1997 | 燃氣式單噴嘴裝于頂部的輻射管加熱器和非家用燃氣式裝于頂部的發光輻射加熱器.建立合理使用能源的要求和試 | Single burner gas fired overhead radiant tube heaters and non-domestic gas-fired overhead luminous radiant heaters. Requirements and test methods for establishing the rational use of energy. Radiometric method C |
| DIN 11210-1982 | 農業機械.帶式噴霧器.噴嘴支架的連接尺寸 | Agricultural machinery; band sprayer; connection dimensions for nozzleholders |
| DIN 11215-1978 | 農業機械.農作物保護噴霧器.噴嘴的連接尺寸 | Agricultural machinery; sprayers for crop protection, connection dimensions for nozzles |
| DIN 12898-1992 | 實驗室用水管龍頭.出水嘴 | Laboratory taps; outlet nozzles |
| DIN 14200-1979 | 噴嘴排放 | Nozzle discharge |
| DIN 14494-1979 | 開式噴嘴固定式噴水系統 | Water spray systems, fixed, with open nozzles |
| DIN 16966-4-1982 | 玻璃纖維增強聚酯樹脂管(UP-GF)管件和接頭.三通噴管嘴尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings an joints; Tees, Nozzles, Dimensions |
| DIN 20033-1990 | 軟管連接件.帶壓緊螺母的錐形管嘴 | Hose fittings; tapered nozzle with clamping nut |
| DIN 20035-1990 | 軟管管接頭.法蘭管嘴.公稱壓力16 | Hose fittings; flange nozzle; nominal pressure 16 |
| DIN 20038-1990 | 軟管管接頭.接頭管嘴 | Hose fittings; coupling nozzles |
| DIN 24375-1981 | 表面處理.無氣噴槍的扁形噴嘴.尺寸、測試、標記 | Surface treatment; flat-stream nozzles for airless spray guns; dimensions, testing, marking |
| DIN 25480-1-1987 | 污染防護箱用元件.噴嘴、遠距離操作鉗用環.窗和支柱系統 | Components for contamination protection boxes; nozzles, rings for remote handling tongs, windows and posting systems |
| DIN 28025-2003 | 不銹鋼噴嘴.PN 10 至 PN 40 | Nozzles of stainless steel - PN 10 to PN 40 |
| DIN 28115-2003 | 碳鋼噴嘴.PN 10 至 PN 40 | Carbon steel nozzles - PN 10 to PN 40 |
| DIN 28136-11-1989 | 攪拌器.第11部分:玻璃纖維襯里的 CE 型公稱容量為 4000 升更換用剛制攪拌器頂蓋噴嘴的位置和尺寸 | Agitator vessels; position and sizes of cover nozzles for glass lined steel agitator vessels, type CE, with a nominal volume of 4000 litres for replacement purposes |
| DIN 28136-14-1999 | 攪拌容器.第14部分:BE型d1=2400-3600mm的搪玻璃鋼攪拌容器用蓋噴嘴的位置和大小, CE型d1=2400-3600mm的搪 | Agitator vessels - Part 14: Position and sizes of cover nozzles for glass lined steel agitator vessels, position H for vessels form BE with d<(Index)1> = 2400 mm to 3600 mm and position K for vessels form CE with d<(Index)1> = 2400 mm to 3600 mm; inactive for new design |
| DIN 28136-2-2005 | 攪拌容器.第2部分:非合金和不銹鋼容器頂蓋噴嘴的位置和尺寸 | Agitator vessels - Part 2: Positions and sizes of cover nozzles in non-alloy and stainless steel vessels |
| DIN 28136-3-2005 | 攪拌容器.第3部分:搪玻璃鋼件攪拌容器頂蓋噴嘴的位置和尺寸 | Agitator vessels - Part 3: Position and sizes of cover nozzles for glass lined steel agitator vessels |
| DIN 28139-3-1985 | 搪瓷容器的焊接凸肩.分離式搭接法蘭連接用S形接管嘴.連接尺寸 | Welding necks for glass lined vessels; form S nozzles for lapped divided flange connections; connecting dimensions |
| DIN 28151-1999 | 鋼制搪玻璃攪拌容器用套管噴嘴.噴嘴位置 | Nozzles of jacket on agitated vessels, of glass lined steel - Position of nozzles |
| DIN 29736-2-1989 | 航空航天.燃料噴嘴接地插頭和插座.技術規范 | Aerospace; fuel nozzle grounding plugs and sockets; technical specification |
| DIN 3404-1988 | 扁平注油嘴 | Lubricating nipples; button head |
| DIN 3405-1986 | 杯形潤滑油嘴 | Lubricating nipples cupped type |
| DIN 3410-1974 | 潤滑油排出管嘴.總尺寸和裝配尺寸 | Lubricating nipples; overall and fitting dimensions |
| DIN 3528-1986 | 煤氣裝置用閥門.帶密封墊的噴嘴 | Valves for gas installations; nozzles with gasket |
| DIN 45635-25-1980 | 機器排放的空氣傳播噪聲的測量.第25部分:包洛面法.氣焊及等離子焊噴嘴和機器 | Measurement of airborne noise emitted by machines; enveloping surface method, oxy-fuel gas and plasma torches and machines |
| DIN 4661-4-1968 | 壓縮氣瓶.第4部分:焊接鋼氣瓶噴嘴 | Gas cylinders, welded steel gas cylinders; nozzles |
| DIN 5042-7-1988 | 燃氣燈和煤氣燈.第7部分:固定噴嘴 | Combustion lamps and gas luminaires; fixed nozzles |
| DIN 5059-1-1992 | 包裝.金屬和塑料管.金屬管.管嘴、管肩 | Packaging; metal and plastic tubes; metal tubes; tube nozzles, tube shoulders |
| DIN 5059-2-1990 | 包裝.金屬和塑料管.塑料管.管嘴 | Packaging; metal and plastic tubes; plastic tubes; tube nozzles |
| DIN 71412-1987 | 錐形潤滑劑注油嘴 | Lubricating nipples; cone type |
| DIN 73372-1978 | 規格T and U 噴油嘴 | Fuel injection nozzles, size T and U |
| DIN 7584-1980 | 家用安裝水管配件.壓力為10巴的平密封墊帶外螺紋的鋼管接管嘴 | Water-fittings for house installation; steal tube nozzles with external thread, flat sealing up to working pressure of 10 bar |
| DIN 7588-1994 | 家裝設備用水管配件.平密封螺旋接頭.壓力10巴的一端帶內螺紋,另一端帶鋼管噴嘴、銅管噴嘴或套管 | Water-fittings for house installation; boltings with flat seal; one side threaded coupling with inside-thread, on the other side steel tube nozzle, copper tube nozzle or sleeve PN 10 |
| DIN 7589-1994 | 家裝設備用水管配件.平密封螺旋接頭.壓力10巴的一端帶外螺紋,另一端帶鋼管噴嘴、銅管噴嘴和套管 | Water-fittings for house installation; boltings with flat seal; one side threaded coupling with outside-thread, on the other side steel tube nozzle, copper tube nozzle or sleeve PN 10 |
| DIN 7592-1981 | 家用安裝水管配件.標稱工作壓力為10巴以下的銅管管嘴 | Water-fittings for house installation; copper tube nozzles up to working pressure of 10 bar |
| DIN 8535-1970 | 氣動工具.螺紋管嘴 | Pneumatic tools, screw nozzle tips |
| DIN 8536-1970 | 氣動工具.轉接管嘴 | Pneumatic tools; transition nozzle tips |
| DIN 8537-1970 | 氣動工具.錐形噴氣管嘴、連接螺母、連接管 | Pneumatic tools; cone nozzle tips, connection nuts, connection nipples |
| DIN EN 12094-7-2005 | 固定式消防系統.氣體滅火系統用元件.第7部分:CO2系統用噴嘴的要求和試驗方法 | Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO<(Index)2> systems; German version EN 12094-7:2000 + A1:2005 |
| DIN EN 13079-2003 | 防飲用水回流污染的裝置.有噴嘴的氣隙.A系列D型 | Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A; Type D; German version EN 13079:2003 |
| DIN EN 13760-2003 | 輕型和重型車輛用汽車液化石油氣灌充設備.噴嘴的試驗要求和尺寸 | Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions; German version EN 13760:2003 |
| DIN EN 14979-2006 | 包裝.軟塑料/金屬層壓管.S13噴嘴的尺寸和公差 | Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13; German version EN 14979:2006 |
| DIN EN 293-1992 | 油壓噴霧器噴嘴.最低要求.試驗 | Oil pressure atomizing nozzles; minimum requirements, testing; german version EN 293:1992 |
| DIN EN ISO 5167-3-2004 | 用插入圓截面管道中的壓差裝置測量流體流量.第3部分:噴嘴和文杜利噴嘴 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003); German version EN ISO 5167-3:2003 |
| DIN EN ISO 9300-2005 | 用文杜利臨界流量噴嘴測量氣體流量 | Measurement of gas flow by means of critical flow Venturi nozzles (ISO 9300:2005); German version EN ISO 9300:2005 |
| DIN ISO 14710-1999 | 農用機械和拖拉機.作物保護設備.空氣輔助的噴灑器.噴嘴旋轉螺母的尺寸 | Agricultural machinery and tractors - Equipment for crop protection - Air-assisted sprayers; dimensions of nozzle swivel-nuts (ISO 14710:1996) |
| DIN ISO 2698-1995 | 柴油發動機.夾緊式燃油噴嘴.7 型和 28 型; 等同采用 ISO 2698:1993 | Diesel engines - Clamp-mounted fuel injectors, types 7 and 28; identical with ISO 2698:1993 |
| DIN ISO 4010-1978 | 道路車輛.延遲針閥式標定噴嘴 | Calibrating Nozzle, Delay Pintle Type |
| DIN ISO 413-1987 | 航空航天.潤滑油加油管嘴頭 | Aircraft; heads of lubricating nipples; identical with ISO 413, edition 1974 |
| DIN ISO 5682-1-1999 | 農用機械和拖拉機.農作物防護設備.第1部分:噴灑器噴嘴的試驗方法 | Agricultural machinery and tractors - Equipment for crop protection - Part 1: Test methods for sprayer nozzles (ISO 5682-1:1996) |
| DIN ISO 7026-1992 | 道路車輛.B類S規格的針式噴嘴用的20、21和27型螺絲擰入式噴嘴架 | Road vehicles; screw-in injection nozzle holders types 20, 21 and 27 for pintle nozzle size "S", type "B"; identical with ISO 7026:1990 |
| DIN ISO 7030-1988 | 道路車輛.12，13，14，15，16，17，18 和19 型 螺旋擰入式噴嘴固定架 | Road vehicles; screw-mounted injection nozzle holders, types 12, 13, 14, 15, 16, 17, 18 and 19; identical with ISO 7030:1987 |
| DIN ISO 8356-1985 | 道路車輛.柴油發動機.22型螺旋擰入式噴油嘴 | Road vehicles; diesel engines; screw-in injector; type 22; identical with ISO 8356, edition 1984 |
| DIN ISO 9102-1992 | 道路車輛.壓燃式發動機.24.25.26型螺絲擰入式噴嘴座 | Road vehicles; compression-ignition engines; screw-in injection nozzle holders, types 24, 25 and 26; Identical with ISO 9102:1990 |
| DIN ISO 9158-1989 | 道路車輛.無鉛汽油用管嘴 | Road vehicles; nozzle spouts for unleaded gasoline; identical with ISO 9158:1988 |
| DIN ISO 9159-1989 | 道路車輛.含鉛汽油和柴油用管嘴 | Road vehicles; nozzle spouts for leaded gasoline and diesel fuel; identical with ISO 9159:1988 |
| DIN V ENV 1259-2-1997 | 單噴嘴燃氣頂部輻射管加熱器和商用燃氣頂部發光輻射加熱器.第2部分:確定合理能耗的要求及試驗方法.輻射計法 | Single burner gas-fired overhead radiant tube heaters and non-domestic gas-fired overhead luminous radiant heaters - Part 2: Requirements and test methods for establishing the rational use of energy; radiometric method B; German version ENV 1259-2:1996 |
| DIN V ENV 1259-3-1997 | 單噴嘴燃氣頂部輻射管加熱器和商用燃氣頂部發光輻射加熱器.第3部分:確定合理能耗的要求及試驗方法.輻射計法 | Single burner gas-fired overhead radiant tube heaters and non-domestic gas-fired overhead luminous radiant heaters - Part 3: Requirements and test methods for establishing the rational use of energy; radiometric method C; German version ENV 1259-3:1996 |
| EN 12067-1-1998+A1-2003 | 燃氣噴嘴和燃氣裝置用燃氣/空氣混合調節器 第1部分：氣動型 | Gas/air ratio controls for gas burners and gas burning appliances - Part 1: Pneumatic types |
| EN 12094-7-2000 | 固定式消防系統 氣體滅火系統的部件 第7部分：對CO2系統的噴嘴的要求及試驗方法 | Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO<(Index)2> systems |
| EN 13012-2001 | 加油站 加油機上使用的自動噴嘴的結構和性能 | Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers |
| EN 13760-2003 | 輕型和重型機動車輛用液化石油氣填充系統 噴油嘴試驗要求和尺寸 | Automative LPG filing system for light and heavy duty vehicles - Nozzle, test requirements and dimensions |
| EN 293-1992 | 油壓噴霧噴嘴 最低要求 測試 | Oil pressure atomizing nozzles; minimum requirements; testing |
| EN 299-1998 | 油壓噴霧噴嘴 角度和噴霧特性的測定 | Oil pressure atomizing nozzles - Determination of the angle and spray characteristics |
| EN ISO 11545-2001 | 農業排灌設備 有噴嘴和噴霧嘴的橫向移動排灌機械和中心軸 分配水的均勻性的測定 | Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution (ISO 11545:2001) |
| EN ISO 15029-1-1999 | 石油和相關產品 難燃液體噴射燃燒特性的測定 第1部分：噴流燃燒持久度 空錐噴嘴法 | Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 1: Spray flame persistence - Hollow-cone nozzle method (ISO 15029-1:1999) |
| EN ISO 5167-1-2003 | 用壓差裝置測量流體流量 第1部分：圓截面管道中插入的節流孔板、噴嘴和文杜利管 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
| EN ISO 5167-3-2003 | 圓截面管道中用壓差裝置測量流體流量 第3部分：噴嘴和文杜利噴嘴 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003) |
| EN ISO 9300-1995 | 用文杜利臨界流量噴嘴測定氣體流量 | Measurement of gas flow means of critical flow Venturi nozzles (ISO 9300:1990) |
| GB 796-1989 | 鹵代烷滅火系統噴嘴性能要求和試驗方法 | Halon fire extinguishing systems--Performance requirements and method of test for nozzles |
| GB/T 19230.3-2003 | 評價汽油清凈劑使用效果的試驗方法第3部分: 汽油清凈劑對電子孔式燃油噴嘴(PFI)堵塞傾向影響的試驗方法 | Test method for evaluating gasoline detergent in use--Part 3: Test method for evaluating gasoline detergent produced effect forelectronic port fuel injector(PFI) fouling |
| GB/T 2624.3-2006 | 用安裝在圓形截面管道中的差壓裝置測量滿管流體流量 第3部分：噴嘴和文丘里噴嘴 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles |
| GB/T 5772-1986 | 柴油機噴油嘴偶件技術條件 | Technical specification for fuel injection nozzles of diesel engines |
| HG/T 3144-1984 | 小容量內混式蒸汽霧化輕質油燒嘴 | () |
| HG/T 3144-1984 | 小容量內混式蒸汽霧化輕質油燒嘴 | () |
| HG/T 3168-1986 | 油噴嘴性能試驗方法 | () |
| ISO 10626-1991 | 作物保護設備 噴霧器 卡口安裝的噴嘴連接尺寸 | Equipment for crop protection; sprayers; connecting dimensions for nozzles with bayonet fixing |
| ISO 11545-2001 | 農業排灌設備 有噴嘴和噴霧嘴的橫向移動排灌機械和中心軸 分配水的均勻性的測定 | Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution |
| ISO 14710-1996 | 作物保護設備 空氣引射噴霧器 噴嘴旋轉螺母的尺寸 | Equipment for crop protection - Air-assisted sprayers - Dimensions of nozzle swivel nuts |
| ISO 15029-1-1999 | 石油和相關產品 難燃液體噴射燃燒特性的測定 第1部分:噴流燃燒持久度 空錐噴嘴法 | Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 1: Spray flame persistence - Hollow-cone nozzle method |
| ISO 20844-2004 | 石油和相關產品.用柴油噴射器噴嘴測定含高聚物油的剪切穩定性 | Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle |
| ISO 2699-1994 | 柴油機 法蘭安裝式“S”號噴油嘴 2、3、4、5和6型 | Diesel engines; flange-mounted fuel injectors, size "S"; types 2, 3, 4, 5 and 6 |
| ISO 413-1974 | 航空器 潤滑油加油管嘴的頭部 | Aircraft; Heads of lubricating nipples |
| ISO 46-1973 | 航空器 燃油管嘴接地插頭和插座 | Aircraft; Fuel nozzle grounding plugs and sockets |
| ISO 5167-1 Technical Corrigendum 1-1997 | 用壓差裝置測量流體流量 第1部分:圓截面管道中插入的節流孔板、噴嘴和文杜利管 技術勘誤1 | Measurement of fluid flow by means of pressure differential devices - Part 1: Orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full - Technical Corrigendum 1 |
| ISO 5167-3-2003 | 用插入圓截面管道中的壓差裝置測量流體流量.第3部分:噴嘴和文杜利噴嘴 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles |
| ISO 5176-1-1991 | 用壓差裝置測量流體流量.第1部分:圓截面管道中插入的節流孔板、噴嘴和文杜利管 | Measurement of fluid flow by means of pressure differential devices; part 1: orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full |
| ISO 5682-1-1996 | 作物保護設備 噴霧設備 第1部分:噴霧機噴嘴的試驗方法 | Equipment for crop protection - Spraying equipment - Part 1: Test methods for sprayer nozzles |
| ISO 6182-9-2005 | 消防.自動噴水滅火系統.第9部分:水霧噴嘴的要求和試驗方法 | Fire protection - Automatic sprinkler system - Part 9: Requirements and test methods for water mist nozzles |
| ISO 6392-2-1996 | 土方機械 潤滑件 第2部分:黃油槍噴嘴 | Earth-moving machinery - Lubrication fittings - Part 2: Grease-gun nozzles |
| ISO 7026-1997 | 柴油機 S尺寸軸針式噴油嘴偶件B型擰入式噴嘴器件(20、21、21.1和27型) | Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size "S", type "B" |
| ISO 7026-1997 | 柴油機 S尺寸軸針式噴油嘴偶件B型擰入式噴嘴器件(20、21、21.1和27型) | Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size "S", type "B" |
| ISO 7030-1987 | 道路車輛 12、13、14、15、16、17、18和19型螺旋擰入式噴嘴器件 | Road vehicles; Screw-mounted injection nozzle holders, types 12, 13, 14, 15, 16, 17, 18 and 19 |
| ISO 7824-1986 | 造船及海上結構物 潤滑油嘴 錐型及平肩型 | Shipbuilding and marine structures; Lubrication nipples; Cone and flat types |
| ISO 8169-1984 | 作物保護設備 噴霧器 噴嘴和壓力計的連接尺寸 | Equipment for crop protection; Sprayers; Connecting dimensions for nozzles and manometers |
| ISO 9158-1988 | 道路車輛 無鉛汽油用管嘴 | Road vehicles; nozzle spouts for unleaded gasoline |
| ISO 9159-1988 | 道路車輛 含鉛汽油和柴油用管嘴 | Road vehicles; nozzle spouts for leaded gasoline and diesel fuel |
| ISO 9300-2005 | 用臨界流量文丘里噴嘴測定氣體流量 | Measurement of gas flow by means of critical flow Venturi nozzles |
| ISO/TR 15377 Technical Corrigendum 1-1999 | 用壓差裝置測量流體流量 符合ISO 5167-1規定的噴嘴和節流孔板規范指南 技術勘誤1 | Measurement of fluid flow by means of pressure-differential devices - Guidelines for the specification of nozzles and orifice plates beyond the scope of ISO 5167-1; Technical Corrigendum 1 |
| ISO/TR 15377-1998 | 用壓差裝置測量流體流量 符合ISO 5167-1規定的噴嘴和節流孔板規范指南 | Measurement of fluid flow by means of pressure-differential devices - Guidelines for specification of nozzles and orifice plates beyond the scope of ISO 5167-1 |
| JB/T 10645-2006 | 碳化硅特種制品 氮化硅結合碳化硅 燒嘴套 | Special products of silicon carbide-Silicon nitride bonded silicon carbide-Nozzle tubes |
| JB/T 10645-2006 | 碳化硅特種制品 氮化硅結合碳化硅 燒嘴套 | Special products of silicon carbide-Silicon nitride bonded silicon carbide-Nozzle tubes |
| JB/T 10697-2007 | 碳化硅特種制品 反應燒結碳化硅 燒嘴套 | () |
| JB/T 10697-2007 | 碳化硅特種制品 反應燒結碳化硅 燒嘴套 | () |
| JB/T 51184-2000 | 噴油嘴偶件可靠性考核 評定方法、臺架試驗方法及失效判定 | () |
| JB/T 5174-2005 | 噴油嘴偶件 型式及連接尺寸 | () |
| JB/T 7296-2004 | 柴油機噴油嘴偶件 技術條件 | () |
| JB/T 7297-2004 | 柴油機噴油嘴偶件 性能試驗方法 | () |
| JB/T 7661-2004 | 柴油機油泵油嘴產品清潔度 限值及測定方法 | () |
| JB/T 8604-1997 | 氣動小噴嘴式內徑測量裝置 | () |
| JB/T 8650.4-1997 | 機床冷卻系統輔件 噴嘴 | () |
| JB/T 9729-1999 | 柴油機噴油泵柱塞偶件、出油閥偶件、噴油嘴偶件徑部密封值樣品 技術條件 | () |
| JB/T 9730-1999 | 柴油機噴油嘴偶件、噴油泵柱塞偶件、噴油泵出油閥偶件 金相檢驗 | () |
| JB/T 9732-1999 | 軸針式標準噴油嘴偶件 | () |
| JB/T 9736-1999 | 噴油嘴偶件、柱塞偶件、出油閥偶件 磁粉探傷方法 | () |
| JC/T 1043-2007 | 水嘴鉛析出限量 | Limit of lead extraction in faucets |
| JIS B1575-2000 | 油脂槍噴嘴 グリースニップル | Grease nipples |
| JIS B1575 ERRATUM 1-2001 | 油脂槍噴嘴(勘誤1) | (Erratum 1) |
| JIS B9913-1972 | 消防用噴嘴連接件的分類及尺寸 消防用ノズルチップの結合部の種類および寸法 | Classification and dimensions of connections for fire department nozzle-tips |
| JIS D2502-1991 | 汽車用散熱器的壓蓋和接管嘴 自動車用ラジエータのプレッシャキャップ及びフィラネック | Pressure caps and filler necks for automobile radiators |
| JIS D3604-1998 | 道路車輛.柴油發動機用燃油噴嘴的形狀及尺寸."S" 規格 | Road vehicles -- Shapes and dimension of fuel injection nozzles for diesel engines -- Size "S" |
| JIS D3631-1998 | 道路車輛.柴油發動機用燃油噴嘴支架的形狀及尺寸."S" 規格 | Road vehicles -- Shapes and dimensions of fuel injection nozzle holders for diesel engines -- Size "S" |
| JIS D3632-1999 | 道路車輛.柴油機燃油噴嘴體的形狀和尺寸.規格P | Road vehicles -- Shapes and dimensions of fuel injection nozzle holders for diesel engines -- Size "P" |
| JIS D3636-2003 | 道路車輛.柴油機燃料噴射泵試驗.樞軸型校準噴嘴 | Road vehicles -- Diesel fuel injection equipment testing -- Pintle type calibrating nozzle |
| JIS D3637-1-2003 | 道路車輛.柴油噴射設備試驗.第1部分:校準噴嘴和固定器組件 | Road vehicles -- Diesel fuel injection equipment testing -- Part 1: Calibrating nozzle and holder assemblies |
| JIS Z8767-2006 | 用臨界流量文丘里噴嘴測定氣體流量 | Measurement of gas flow by means of critical flow Venturi nozzles |
| MT/T 662-1997(2005) | 滾筒采煤機噴霧降塵用噴嘴基本尺寸 | () |
| NF E31-302-1976 | 流量小于或等于200kg/小時家用燃料油自動噴嘴 | (Automatic sprayer burners for domestic fuel oil with a flow rate of up to 200 kg/H.) |
| NF E31-319-1992 | 油壓霧化噴嘴.最低要求.試驗 | (OIL PRESSURE ATOMIZING NOZZLES. MINIMUM REQUIREMENTS. TESTING. (EUROPEAN STANDARD EN 293).) |
| NF E31-320-1999 | 油壓自動噴嘴.角度和噴射特性的測定(歐洲標準EN299) | (Oil pressure atomizing nozzles. Determination of the angle and spray characteristics.) |
| NF E31-354-1-1999 | 供暖鍋爐.第1部分:壓力送風噴嘴式供暖鍋爐.術語、一般要求、試驗和標志 | (Heating boilers. Part 1 : heating boilers with forced draught burners. Terminology, general requirements, testing and marking.) |
| NF L94-111-1975 | 飛機地面注油管噴嘴的插頭和插座 | (Aircraft . Fuel nozzle grounding plugs and sockets.) |
| NF R16-319-2003 | 道路車輛.B型、S規格軸針式噴油嘴用20、21、21.1和27型旋入式噴油嘴保持座 | (Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size “S“, type “B“.) |
| NF R16-331-1986 | 道路車輛.柴油發動機.22型螺栓固定的噴嘴 | (ROAD VEHICLES. DIESEL ENGINES. SCREW-IN INJECTOR,TYPE 22.) |
| NF R16-332-1-1993 | 道路車輛.燃料噴射設備的試驗.第1部分:噴嘴檢驗及支架裝置 | (Road vehicles. Fuel injection equipment testing. Part 1 : calibrating nozzle and holder assemblies.) |
| NF R16-335-1989 | 道路車輛.壓燃式發動機.擰入式噴嘴座,23型 | (ROAD VEHICLES. COMPRESSION-IGNITION ENGINES. SCREW-IN INJECTION NOZZLE HOLDER,TYPE 23.) |
| NF R16-340-2003 | 柴油發動機.24、25和26和26.1型旋入式噴嘴保持座 | (Diesel engines - Screw-in injection nozzle holders, types 24, 25, 26 and 26.1.) |
| NF S61-820-2001 | 消防和救援設備.消防用手控噴水嘴 | (Firefighting and rescue service equipment - Hand-held nozzles for firefighting.) |
| NF S62-137-2001 | 固定式消防系統.氣體滅火系統用元件.第7部分:CO2系統噴嘴的要求和試驗方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 7 : requirements and test methods for nozzles for CO2 systems.) |
| NF T51-075-1986 | 塑料.燃燒特性.針狀噴嘴試驗 | (Plastics. Fire behaviour. Needle burner test.) |
| NF T77-106-1987 | 工業硅樹脂.粘度、擠壓度（流動率）和ＣＡＳＳＯＮ粘度的測定.標準擠壓噴嘴法 | (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF EXTRUDABILITY (FLUIDITY) AND OF VISCOSITY “CASSON“. METHOD USING STANDARD EXTRUSION NOZZLE.) |
| NF U26-132-1985 | 植物保護裝置.農藥噴灑機具.噴霧器.噴嘴和壓力計的連接尺寸 | (EQUIPMENT FOR CROP PROTECTION. SPRAYERS. CONNECTING DIMENSIONS FOR NOZZLES AND MANOMETERS.) |
| NF U26-134-1992 | 農作物保護設備.噴霧機械.卡口固定噴嘴連接尺寸 | (EQUIPMENT FOR CROP PROTECTION. SPRAYERS. CONNECTING DIMENSIONS FOR NOZZLES WITH BAYONET FIXING.) |
| NF U26-136-1997 | 作物保護設備.空氣噴霧機械.噴嘴旋轉螺母的尺寸 | (EQUIPMENT FOR CROP PROTECTION. AIR-ASSISTED SPRAYERS. DIMENSIONS OF NOZZLE SWIVEL NUTS.) |
| NF X10-102-3-2003 | 用插入圓截面管道中的壓差裝置測量流體流量.第3部分:噴嘴和文杜利噴嘴 | (Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3 : nozzles and Venturi nozzles.) |
| QB 1334-2004 | 水嘴通用技術條件 | () |
| QB 2806-2006 | 溫控水嘴 | Thermostatic faucets |
| QB/T 3895-1999 | 旋塞式熱水嘴 | Pluged hot-Water taps |
| SH/T 0103-2007 | 含聚合物油剪切安定性的測定 柴油噴嘴法 | Standard test method for shear stability of polymer containing fluids using a european diesel injector apparatus |
| SH/T 0764-2005 | 柴油機噴嘴結焦試驗方法（XUD-9法） | () |
| SY/T 5906-2003 | 配水嘴嘴損曲線圖版制作方法 | () |
| UL 2351-2000 | 防火設施用噴嘴 | (Spray nozzles for fire-protection service ) |
| YB/T 4087-1982(2005) | 冶金噴嘴 | () |
| prEN 12067-2-2001 | 燃氣噴嘴和燃氣裝置用燃氣/空氣混合調節器 第2部分：電子型 | Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types |
| prEN 12881-1-1997 | 傳輸帶 燃燒模擬法可燃性試驗 第1部分：兩米單噴嘴丙烷坑道試驗 | Conveyor belts - Fire simulation flammability testing - Part 1: Two metre single burner propane gallery test |
| prEN 3908-1999 | 航空航天系列 鈍化耐腐蝕鋼潤滑軸向噴嘴 | Aerospace series - Nipples, lubricating, axial type, in corrosion resisting steel, passivated |
| prEN ISO 20844-2002 | 石油及石油產品 用柴油機噴嘴測定含聚合物油類的剪切穩定性 | Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle (ISO/DIS 20844:2002) |
| 編號 | 中文名稱 | 英文名稱 |