| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| GB/T 1149.1-1994 | 內燃機活塞環通用規則 | Internal combustion engines--Piston rings--General specifications |
| GB/T 1149.2-1994 | 內燃機活塞環術語 | Internal combustion engines--Piston rings--Vocabulary |
| GB/T 1149.3-1992 | 內燃機活塞環刮環 | Internal combustion engines--Piston rings--Scraper rings |
| GB/T 1149.4-1994 | 內燃機活塞環技術要求 | Internal combustion engines--Piston rings--Quality requirements |
| GB/T 1149.5-1992 | 內燃機活塞環油環 | Internal combustion engines--Piston rings--Oil control rings |
| GB/T 1149.6-1994 | 內燃機活塞環檢驗方法 | Internal combustion engines--Piston rings--Inspection measuring principles |
| GB/T 1149.7-1994 | 內燃機活塞環螺旋撐簧油環 | Internal combustion engines--Piston rings--Coil-spring-loaded oil control rings |
| GB/T 2348-1993 | 液壓氣動系統及元件缸內徑及活塞桿外徑 | Fluid power systems and components--Cylinder bores and piston rod diameters |
| GB/T 14222-1993 | 內燃機活塞環矩形環 | Internal combustion engines--Piston rings--Rectangular rings |
| ANSI B93.3-1984 | 汽缸孔和活塞桿直徑.英制系列 | Cylinder Bore and Piston Rod Diameters - Inch Series |
| ANSI B93.32M-1973 | 流體動力徑向壓縮型活塞環的環槽尺寸 | Groove dimensions for fluid power radial compression type piston rings |
| ANSI B93.36M-1973 | 浮式金屬和非金屬流體動力活塞環凹槽尺寸 | Floating Type Metallic and Non-Metallic Fluid Power Piston Rings, Groove Dimensions for |
| ANSI B93.76-1988 | 液壓氣動缸.往復運動用活塞和活塞桿密封腔的尺寸和公差 | Hydraulic Fluid Power - Cylinders - Housings for Piston and Rod Seals in Reciprocating Applications - Dimensions and Tolerances |
| ANSI/ASTM D4857-2004 | 令二沖程循環汽油發動機(外側發動機除外)中活塞環結膠和活塞沉積物最小化的潤滑劑作用的測定 | Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards, Test Method for (05.03) |
| ANSI/SAE J1588-1998 | 內燃機.活塞環.詞匯 | Internal Combustion Engines - Piston Rings - Vocabulary |
| ANSI/SAE J1589-1998 | 內燃機.活塞環.檢查測量原則 | Internal Combustion Engines - Piston Rings - Inspection Measuring Principles |
| ANSI/SAE J1590-1998 | 內燃機.活塞環.材料規范 | Internal Combustion Engines - Piston Rings - Material Specifications |
| ANSI/SAE J1591-1998 | 內燃機.活塞環.通用規范 | Internal Combustion Engines - Piston Rings - General Specifications |
| ANSI/SAE J1996-1992 | 內燃機活塞環質量要求 | Internal Combuston Engines - Piston Rings, Quality Requirements |
| ANSI/SAE J1997-1989 | 內燃機.活塞環.矩形截面環 | Internal Combustion Engines - Piston Rings - Rectangular Rings |
| ANSI/SAE J1998-1992 | 內燃機.活塞環.窄寬度矩形環 | Internal Combustion Engines - Piston Rings - Rectangular Rings with Narrow Ring Width |
| ANSI/SAE J1999-1992 | 內燃機.活塞環.刮油環 | Internal Combustion Engines - Piston Rings - Scraper Rings |
| ANSI/SAE J2000-1992 | 內燃機.活塞環.梯形環 | Internal Combustion Engines - Piston Rings - Keystone Rings |
| ANSI/SAE J2001-1992 | 內燃機活塞環.單面梯形（活塞）氣環 | Internal Combustion Engines - Piston Rings - Half Keystone Rings |
| ANSI/SAE J2002-1992 | 內燃機.活塞環.護油環 | Internal Combustion Engines - Piston Rings - Oil Control Rings |
| ANSI/SAE J2003-1992 | 內燃機.活塞環.螺旋彈簧定位的護油環 | Internal Combustion Engines - Piston Rings - Coil Spring Loaded Oil Control Rings |
| ANSI/SAE J2004-1992 | 內燃機.活塞環.撐脹器/組合式護油環 | Internal Combustion Engines - Piston Rings - Expander/Segment Oil Control Rings |
| ANSI/SAE J2226-1998 | 內燃機.活塞環.鋼矩形環 | Internal Combustion Engines - Piston Rings - Steel Rectangular Rings |
| ASTM D 4857-2003 | 將二沖程循環汽油發動機(外側發動機除外)中的活塞環結膠和活塞積垢減到最小的潤滑油能力測定用標準試驗方法 | Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards |
| ASTM G 181-2004 | 在潤滑條件下進行活塞環和缸襯材料摩擦試驗的標準實施規程 | Standard Practice for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions |
| BS 4K 6-1928 | 飛機材料規范.鑄鐵活塞環槽(砂型鑄和冷鑄) | Specification for aircraft material - Cast iron piston ring pots (sand cast and chill cast) |
| BS 5341-5-1976 | 往復式內燃機用直徑小于等于200mm的活塞環.第5部分:環槽 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Ring grooves |
| BS 5341-6.1-1992 | 往復式內燃機直徑小于等于200mm的活塞環.第6部分:術語、檢驗方法和通用規范.第1集;術語 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Vocabulary, inspection methods and generic specifications - Vocabulary |
| BS 5341-7.3.1-1992 | 往復式內燃機直徑小于等于200mm的活塞環.第7部分:單片環的設計、尺寸和命名.第3節:楔表面和半楔表面壓縮環. | Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Designs, dimensions and designations for single piece rings - Keystone and half keystone compression rings - Specification for keystone rings |
| BS 5341-7.4-1992 | 往復式內燃機直徑小于等于200mm的活塞環.第7部分:單片環設計、尺寸和命名.第4節:控油環規范 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Designs, dimensions and designations for single piece rings - Specification for oil control rings |
| BS 5341-8.1-1992 | 往復式內燃機直徑小于等于200mm的活塞環.第8部分:多片組合式控油環設計、尺寸和命名.第1節:盤簧加壓控油環 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Designs, dimensions and designations for multi-piece oil control rings - Specification for coil-spring-loaded oil control rings |
| BS DD 208-1992 | 往復式內燃機用的直徑為200mm及其以下的活塞環:窄環寬度的矩形截面活塞環的規范 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines: specification for rectangular rings with narrow ring width |
| BS DD 209-1992 | 往復式內燃機用的直徑為200mm及其以下的活塞環:半梯形活塞環規范 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines: specification for half keystone rings |
| BS HC 402-1976 | 鑄鐵圓筒規范(離心鑄造)(適用于直徑小于和等于200mm的活塞環) | Specification for cast iron ring pots (centrifugally cast) (suitable for piston rings up to 200 mm in diameter) |
| BS HC 403-1976 | 高鉻合金鑄件鐵環形坩堝規范(離心鑄造)(適用于直徑達400mm的活塞環) | Specification for high chromium alloy cast iron ring pots (centrifugally cast) (suitable for piston rings up to 400 mm in diameter) |
| BS HC 404-1976 | 鉻-鉬合金鑄件鐵環形坩堝(適用于離心鑄造和砂型鑄造密封環、活塞環和汽缸套筒) | Specification for chromium-molybdenum alloy cast iron ring pots (suitable for centrifugally cast and sand cast sealing rings, piston rings and cylinder liners) |
| BS ISO 6195-2002 | 流體傳動系統和元件.缸筒.往復用活塞桿刮油漲圈.尺寸和公差 | Fluid power systems and components - Cylinder-rod wiper-ring housings in reciprocating applications - Dimensions and tolerances |
| BS ISO 6621-2-2004 | 內燃機.活塞環.檢驗測量規則 | Internal combustion engines - Piston rings - Inspection measuring principles |
| BS ISO 6621-4-2003 | 內燃機.活塞環.一般規范 | Internal combustion engines - Piston rings - General specifications |
| BS ISO 6621-5-2006 | 內燃機.活塞環.質量要求 | Internal combustion engines - Piston rings - Quality requirements |
| BS ISO 6622-1-2003 | 內燃機.活塞環.鑄鐵制矩形環 | Internal combustion engines - Piston rings - Rectangular rings made of cast iron |
| BS ISO 6622-2-2003 | 內燃機.活塞環.鋼制矩形環 | Internal combustion engines - Piston rings - Rectangular rings made of steel |
| BS ISO 6623-2004 | 內燃機.活塞環.鑄鐵制刮環 I | nternal combustion engines - Piston rings - Scraper rings made of cast iron |
| BS ISO 6624-2-2003 | 內燃機.活塞環.鑄鐵制半梯形環 | Internal combustion engines - Piston rings - Half keystone rings made of cast iron |
| BS ISO 6624-4-2003 | 內燃機.活塞環.鋼制半梯形環 | Internal combustion engines - Piston rings - Half keystone rings made of steel |
| BS ISO 7425-2-2002 | 液壓流體動力.彈性體塑料面密封件的汽缸.尺寸和公差.活塞桿密封汽缸 | Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Rod seal housings |
| DD 208-1992 | 往復式內燃機用最大直徑為200mm的活塞環:帶有窄環寬度的矩形截面活塞環規范 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines: specification for rectangular rings with narrow ring width |
| DD 209-1992 | 往復式內燃機用最大直徑為200mm的活塞環:半梯形截面活塞環規范 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines: specification for half keystone rings |
| DIN 34110-1991 | 一般公稱用活塞環.公稱直徑為10至1200mm的 R 型環、普通壓緊環 | Piston rings for general engineering; R-rings, plain compression rings, 10 up to 1200 mm nominal diameter |
| DIN 70907-1991 | 活塞環.質量特性試驗.術語和測量程序.DIN ISO 6621 T.2的補充 | Piston rings; test of quality characteristics; terms, measuring procedures; supplement to DIN ISO 6621 Part 2 |
| DIN 70908-1991 | 活塞環.質量要求.可視特性和標記.DIN ISO 6621 T.5的補充 | Piston rings; quality requirements; visible characteristics, marking; supplement to DIN ISO 6621 Part 5 |
| DIN 8533-1970 | 氣動工具.活塞桿用沖擊頭、錐頭 | Pneumatic tools, rammer butts, cones for piston-rods |
| DIN ISO 3320-2001 | 液壓系統和元件.缸徑和活塞桿直徑.米制系列 | Fluid power systems and components - Cylinder bores and piston rod diameter - Metric series (ISO 3320:1987) |
| DIN ISO 4395-1985 | 液壓傳動系統和元件.汽缸.活塞桿螺紋尺寸和型式.等同采用ISO 4395-1985版本 | Fluid power systems and components; cylinders; piston rod thread dimensions and types; identical with ISO 4395, edition 1978 |
| DIN ISO 5597-1988 | 液壓流體動力.液壓缸.往復作用的活塞和活塞桿的密封腔.尺寸和公差 | Hydraulic fluid power; cylinders; housings for piston and rod seals in reciprocating applications; dimensions and tolerances; identical with ISO 5597:1987 |
| DIN ISO 6621-1-1990 | 內燃機.活塞環.第1部分:詞匯 | Internal combustion engines; piston rings; vocabulary; identical with ISO 6621-1:1986 |
| DIN ISO 6621-2-1990 | 內燃機.活塞環.第2部分:檢驗測量原則 | Internal combustion engines; piston rings; inspection measuring principles; identical with ISO 6621-2:1984 |
| DIN ISO 6621-3-1990 | 內燃機.活塞環.第3部分:材料規范 | Internal combustion engines; piston rings; material specifications; identical with ISO 6621-3:1983 |
| DIN ISO 6621-4-1990 | 內燃機.活塞環.第4部分:一般規范 | Internal combustion engines; piston rings; general specifications; identical with ISO 6621-4:1988 |
| DIN ISO 6621-5-1990 | 內燃機.活塞環.第5部分:質量要求 | Internal combustion engines; piston rings; quality requirements; identical with ISO 6621-5:1988 |
| DIN ISO 6622-1-1990 | 內燃機.活塞環.第1部分:矩形截面環 | Internal combustion engines; piston rings; rectangular rings; identical with ISO 6622-1:1986 |
| DIN ISO 6623-1990 | 內燃機.活塞環.刮油環 | Internal combustion engines; piston rings; scraper rings; identical with ISO 6623:1986 |
| DIN ISO 6624-1-1990 | 內燃機.活塞環.第1部分:梯形截面環 | Internal combustion engines; piston rings; keystone rings; identical with ISO 6624-1:1986 |
| DIN ISO 6625-1990 | 內燃機.活塞環.護油環 | Internal combustion engines; piston rings; oil control rings; identical with ISO 6625:1986 |
| DIN ISO 6626-1990 | 內燃機.活塞環.螺旋彈簧承載油控制環 | Internal combustion engines; piston rings; coil-spring-loaded oil control rings; identical with ISO 6626:1989 |
| DIN ISO 7181-2001 | 液壓系統和元件.作動筒.缸筒和活塞桿截面比 | Hydraulic power systems and components - Cylinders - Bore and rod area ratios (ISO 7181:1991) |
| DIN ISO 7425-2-1990 | 液壓傳動.彈性體賦能塑料面密封溝槽.尺寸和公差.第2部分:活塞桿密封溝槽 | Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; rod seal housings; identical with ISO 7425-2:1989 |
| DIN ISO 8140-1991 | 氣動流體動力.10巴(1000kPa)系列氣缸.活塞桿U形夾.安裝尺寸 | Pneumatic fluid power; cylinders, 10 bar series; rod end clevis; mounting dimensions; identical with ISO 8140:1986 |
| GB/T 14036-1993 | 液壓缸活塞桿端帶關節軸承耳環安裝尺寸 | Hydraulic fluid power--Cylinders--Rod end spherical eyes--Mounting dimensions |
| GB/T 14042-1993 | 液壓缸活塞桿端柱銷式耳環安裝尺寸 | Hydraulic fluid power--Cylinders--Rodend plain eyes--Mounting dimensions |
| GB/T 14223-1993 | 內燃機活塞環梯形環和楔形環 | Internal combustion engines--Piston rings--Keystone rings and half keystone rings |
| GB/T 15242.1-1994 | 液壓缸活塞和活塞桿動密封裝置用同軸密封件尺寸系列和公差 | Hydraulic fluidpower--Cylinder rod and piston seals for reciprocating applications of co-axial seals--Dimensions and tolerances |
| GB/T 15242.2-1994 | 液壓缸活塞和活塞桿動密封裝置用支承環尺寸系列和公差 | Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications of bearing rings--Dimensions and tolerances |
| GB/T 15242.3-1994 | 液壓缸活塞和活塞桿動密封裝置用同軸密封件安裝溝槽尺寸系列和公差 | Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications of Co-axial seals--Dimensions and tolerances of housings |
| GB/T 15242.4-1994 | 液壓缸活塞和活塞桿動密封裝置用支承環安裝溝槽尺寸系列和公差 | Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications of bearing rings--Dimensions and tolerances of housings |
| GB/T 2350-1980 | 液壓氣動系統及元件活塞桿螺紋型式和尺寸系列 | Fluid power systems and components--Cylinders--Piston rod thread dimensions and types |
| GB/T 2879-2005 | 液壓缸活塞和活塞桿動密封溝槽尺寸和公差(1986年版) | Hydraulic fluid power-Cylinders-Housings for piston and rod seals in reciprocating applications-Dimensions and tolerances |
| GB/T 2880-1981 | 液壓缸活塞和活塞桿窄斷面動密封溝槽尺寸系列和公差 | Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications--Dimensions andtolerances of housings--Narrow section series |
| GB/T 6577-1986 | 液壓缸活塞桿帶支承環密封溝槽型式、尺寸和公差 | Hydraulic fluid power--Cylinders--Piston seal housings incorporating bearing rings--Dimensions and tolerances |
| GB/T 6578-1986 | 液壓缸活塞桿用防塵圈溝槽型式、尺寸和公差 | Hydraulic fluid power--Cylinders--Reciprocating--Housings for rod wipers--Dimensions and tolerances |
| ISO 3320-1987 | 流體傳動系統和元件 缸內徑和活塞桿直徑 米制系列 | Fluid power systems and components; Cylinder bores and piston rod diameters; Metric series |
| ISO 3321-1975 | 流體傳動系統和元件 缸內徑和活塞桿直徑 英制系列 | Fluid power systems and components; Cylinder bores and piston rod diameters; Inch series |
| ISO 4395-1978 | 流體傳動系統和元件 缸筒 活塞桿螺紋尺寸和型式 | Fluid power systems and components; Cylinders; Piston rod thread dimensions and types |
| ISO 5597-1987 | 液壓傳動 缸筒 往復用活塞和活塞桿密封溝槽 尺寸和公差 | Hydraulic fluid power; Cylinders; Housings for piston and rod seals in reciprocating applications; Dimensions and tolerances |
| ISO 6195-2002 | 流體動力系統和元件.往復作用的活塞桿刮垢環罩.尺寸和公差 | Fluid power systems and components - Cylinder-rod wiper-ring housings in reciprocating applications - Dimensions and tolerances |
| ISO 6621-1-1986 | 內燃機 活塞環 第1部分:詞匯 | Internal combustion engines; Piston rings; Part 1 : Vocabulary |
| ISO 6621-2-2003 | 內燃機.活塞環.第2部分:檢驗測量規則 | Internal combustion engines - Piston rings - Part 2: Inspection measuring principles |
| ISO 6621-3-2000 | 內燃機 活塞環 第3部分:技術規范 | Internal combustion engines - Piston rings - Part 3: Material specifications (Revision of ISO 6621-3:1983) |
| ISO 6621-4-2003 | 內燃機.活塞環.第4部分:一般規范 | Internal combustion engines - Piston rings - Part 4: General specifications |
| ISO 6621-5-2005 | 內燃機.活塞環.第5部分:質量要求 | Internal combustion engines - Piston rings - Part 5: Quality requirements |
| ISO 6622-1-2003 | 內燃機.活塞環.第1部分:矩形鑄鐵環 | Internal combustion engines - Piston rings - Part 1: Rectangular rings made of cast iron |
| ISO 6622-2-2003 | 內燃機.活塞環.第2部分:矩形鋼環 | Internal combustion engines - Piston rings - Part 2: Rectangular rings made of steel |
| ISO 6623-2004 | 內燃機.活塞環.鑄鐵刮環 | Internal combustion engines - Piston rings - Scraper rings made of cast iron |
| ISO 6624-1-2001 | 內燃機 活塞環 第1部分：鑄鐵梯形環 | Internal combustion engines - Piston rings - Part 1: Keystone rings made of cast iron |
| ISO 6624-2-2003 | 內燃機.活塞環.第2部分:半梯形鑄鐵環 | Internal combustion engines - Piston rings - Part 2: Half keystone rings made of cast iron |
| ISO 6624-3-2001 | 內燃機 活塞環 第3部分：鋼制梯形環 | Internal combustion engines - Piston rings - Part 3: Keystone rings made of steel |
| ISO 6624-4-2003 | 內燃機.活塞環.第4部分:半梯形鋼環 | Internal combustion engines - Piston rings - Part 4: Half keystone rings made of steel |
| ISO 6625-1986 | 內燃機 活塞環 油環 | Internal combustion engines; Piston rings; Oil control rings |
| ISO 6626-1989 | 內燃機.活塞環.螺旋撐簧油環 | Internal combustion engines; piston rings; coil-spring-loaded oil control rings |
| ISO 6626-2-2003 | 內燃機.活塞環.第2部分:窄鑄鐵環帶的螺旋撐簧油環 | Internal combustion engines - Piston rings -- Part 2 Coil-spring-loaded oil control rings of narrow width made of cast iron |
| ISO 6627-2000 | 內燃機 活塞環 漲簧/組合控油環 | Internal combustion engines - Piston rings - Expander/segment oil-control rings |
| ISO 7181-1991 | 液壓傳動 缸筒 活塞和活塞桿面積比 | Hydraulic fluid power; cylinders; bore and rod area ratios |
| ISO 7425-2-1989 | 液壓傳動 彈性體賦能塑料面密封溝槽 尺寸和公差 第2部分:活塞桿密封溝槽 | Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; part 2: rod seal housings |
| JB/T 10628-2006 | 內燃機 活塞環 矩形鋼環 | Internal combustion engines-Piston rings-Steel rectangular rings |
| JB/T 5123-1991 | SG1 系列雙作用單活塞桿液壓缸 | () |
| JB/T 5447-1991 | 往復活塞壓縮機鑄鐵活塞環 | () |
| JB/T 6016-1992 | 內燃機單體鑄造活塞環 金相檢驗 | () |
| JB/T 6290-2007 | 內燃機 筒體鑄造活塞環 金相檢驗 | Internal combustion engines-Sleeve cast piston rings-Metallographic inspections |
| JB/T 6724-1993 | 內燃機球墨鑄鐵活塞環 金相檢驗 | () |
| JB/T 7939-1999 | 單活塞桿液壓缸兩腔面積比 | () |
| JB/T 9745-1999 | 內燃機 硼鑄鐵單體鑄造活塞環 金相檢驗 | () |
| JB/T 9758-2004 | 氣缸套、活塞環快速模擬磨損 試驗方法 | () |
| JIS B8032-1-1998 | 內燃機.小直徑活塞環.第1部分:詞匯 內燃機関 ― 小徑ピストンリング ― 第１部：用語 | Internal combustion engines -- Small diameter piston rings -- Part 1: Vocabulary |
| JIS B8032-2-1998 | 內燃機.小直徑活塞環.第2部分:檢驗測量原則 內燃機関 ― 小徑ピストンリング ― 第２部：測定方法 | Internal combustion engines -- Small diameter piston rings -- Part 2: Inspection measuring principles |
| JIS B8032-3-1998 | 內燃機.小直徑活塞環.第3部分:材料規范 內燃機関 ― 小徑ピストンリング ― 第３部：材料 | Internal combustion engines -- Small diameter piston rings -- Part 3: Material specifications |
| JIS B8032-4-1998 | 內燃機.小直徑活塞環.第4部分:一般規范 內燃機関 ― 小徑ピストンリング ― 第４部：仕様の一般規定 | Internal combustion engines -- Small diameter piston rings -- Part 4: General specifications |
| JIS B8032-5-1998 | 內燃機.小直徑活塞環.第5部分:質量要求 內燃機関 ― 小徑ピストンリング ― 第５部：要求品質 | Internal combustion engines -- Small diameter piston rings -- Part 5: Quality requirements |
| JIS B8032-6-1998 | 內燃機.小直徑活塞環.第6部分:矩形環 內燃機関 ― 小徑ピストンリング ― 第６部：レクタンギュラリング | Internal combustion engines -- Small diameter piston rings -- Part 6: Rectangular rings |
| JIS B8032-7-1998 | 內燃機.小直徑活塞環.第7部分:帶窄環寬度的矩形環 內燃機関 ― 小徑ピストンリング ― 第７部：薄幅レクタンギュラリング | Internal combustion engines -- Small diameter piston rings -- Part 7: Rectangular rings with narrow ring width |
| JIS B8032-8-1998 | 內燃機.小直徑活塞環.第8部分:刮油環 內燃機関 ― 小徑ピストンリング ― 第８部：スクレーパリング | Internal combustion engines -- Small diameter piston rings -- Part 8: Scraper rings |
| JIS B8032-9-1998 | 內燃機.小直徑活塞環.第9部分:楔形環 內燃機関 ― 小徑ピストンリング ― 第９部：キーストンリング | Internal combustion engines -- Small diameter piston rings -- Part 9: Keystone rings |
| JIS B8032-10-1998 | 內燃機.小直徑活塞環.第10部分:半楔形環 內燃機関 ― 小徑ピストンリング ― 第１０部：ハーフキーストンリング | Internal combustion engines -- Small diameter piston rings -- Part 10: Half keystone rings |
| JIS B8032-11-1998 | 內燃機.小直徑活塞環.第11部分:油控環 內燃機関 ― 小徑ピストンリング ― 第１１部：オイルコントロールリング | Internal combustion engines -- Small diameter piston rings -- Part 11: Oil control rings |
| JIS B8032-12-1998 | 內燃機.小直徑活塞環.第12部分:盤簧加載油控環 內燃機関 ― 小徑ピストンリング ― 第１２部：コイルエキスパンダ付きオイルコントロールリング | Internal combustion engines -- Small diameter piston rings -- Part 12: Coil-spring-loaded oil control rings |
| JIS B8032-13-1998 | 內燃機.小直徑活塞環.第13部分:擴展器/扇形體油控環 內燃機関 ― 小徑ピストンリング ― 第１３部：スチール組合せオイルコントロールリング | Internal combustion engines -- Small diameter piston rings -- Part 13: Expander/segment oil control rings |
| JIS B8037-1-1998 | 內燃機.大直徑活塞環.第1部分:詞匯 內燃機関 ― 大徑ピストンリング ― 第１部：用語 | Internal combustion engines -- Large diameter piston rings -- Part 1: Vocabulary |
| JIS B8037-2-1998 | 內燃機.大直徑活塞環.第2部分:檢驗測量原則 內燃機関 ― 大徑ピストンリング ― 第２部：測定方法 | Internal combustion engines -- Large diameter piston rings -- Part 2: Inspection measuring principles |
| JIS B8037-3-1998 | 內燃機.大直徑活塞環.第3部分:材料規范 內燃機関 ― 大徑ピストンリング ― 第３部：材料 | Internal combustion engines -- Large diameter piston rings -- Part 3: Material specifications |
| JIS B8037-4-1998 | 內燃機.大直徑活塞環.第4部分:一般規范 內燃機関 ― 大徑ピストンリング ― 第４部：仕様の一般規定 | Internal combustion engines -- Large diameter piston rings -- Part 4: General specifications |
| JIS B8037-5-1998 | 內燃機.大直徑活塞環.第5部分:質量要求 內燃機関 ― 大徑ピストンリング ― 第５部：要求品質 | Internal combustion engines -- Large diameter piston rings -- Part 5: Quality requirements |
| JIS B8037-6-1998 | 內燃機.大直徑活塞環.第6部分:矩形環 內燃機関 ― 大徑ピストンリング ― 第６部：レクタンギュラリング | Internal combustion engines -- Large diameter piston rings -- Part 6: Rectangular rings |
| JIS B8037-7-1998 | 內燃機.大直徑活塞環.第7部分:油控環 內燃機関 ― 大徑ピストンリング ― 第７部：オイルコントロールリング | Internal combustion engines -- Large diameter piston rings -- Part 7: Oil control rings |
| JIS B8037-8-1998 | 內燃機.大直徑活塞環.第8部分:盤簧加載油控環 內燃機関 ― 大徑ピストンリング ― 第８部：コイルエキスパンダ付きオイルコントロールリング | Internal combustion engines -- Large diameter piston rings -- Part 8: Coil-spring-loaded oil control rings |
| JIS B8038-1998 | 往復式液壓氣缸用活塞環 往復動油圧シリンダ用ピストンリング | Piston rings for reciprocating hydraulic cylinders |
| JIS B8366-1-2000 | 流體動力系統和元件.液壓缸.元件和識別代碼.第1部分:缸徑和活塞桿直徑.米制系列 油圧?空気圧システム及び機器 ― シリンダ ― 構成要素及び識別記號 ― 第１部：シリンダ內徑及びピストンロッド徑 | Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 1: Cylinder bores and piston rod diameters -- Metric series |
| JIS B8366-4-2000 | 流體動力系統和元件.液壓缸.元件和識別碼.第4部分:活塞桿螺紋尺寸和類型 油圧?空気圧システム及び機器 ― シリンダ ― 構成要素及び識別記號 ― 第４部：ピストンロッド先端ねじ寸法及び形狀 | Fluid power systems and components -- Cylinder -- Elements and identification code -- Part 4: Piston rod thread dimension and types |
| JIS B8395-2000 | 流體動力系統和元件.氣缸.往復運功用的活塞桿刮垢器環的外套.尺寸和公差 油圧?空気圧システム及び機器 ― シリンダ ― 往復動用ワイパリングのハウジング ― 寸法及び許容差 | Fluid power systems and components -- Cylinders -- Housings for rod wiper rings in reciprocating applications -- Dimensions and tolerances |
| JIS B8396-2000 | 流體動力系統和元件.氣缸.往復運功用的活塞和活塞桿密封件的外套.尺寸和公差 油圧 ― シリンダ ― 往復動用ピストン及びロッドシールのハウジング ― 寸法及び許容差 | Hydraulic fluid power -- Cylinders -- Housings for piston and rod seals in reciprocating applications -- Dimensions and tolerances |
| MT/T 472-1996 | 懸臂式掘進機 液壓缸內徑活塞桿及銷軸直徑系列 | () |
| NF E48-019-2003 | 流體動力系統和元件.油缸內徑和活塞桿直徑.米制系列 | (Fluid power systems and components - Cylinder bores and piston rod diameters - Metric series.) |
| NF E48-034-1990 | 液壓傳動.液壓缸.小摩擦力活塞桿的密封殼.尺寸 | (Hydraulic fluid power. Cylinders. Seal housing for low-friction rods. Dimensions.) |
| NF E48-036-1984 | 液壓傳動.千斤頂.鑄鐵活塞環和活塞室公差和尺寸 | (HYDRAULIC FLUID POWER. CYLINDER. DIMENSIONS AND TOLERANCES OF CAST IRON PISTON RINGS AND OF THEIR HOUSINGS.) |
| NF E48-052-1992 | 液壓傳動.液壓缸.缸筒和活塞桿截面比 | (Hydraulic fluid power. Cylinders. Bore and rod area ratios.) |
| NF E48-060-1992 | 液壓和氣壓傳動.千斤頂.活塞桿的端頭.螺紋:尺寸和類型 | (Fluid power. Cylinders. Piston rod thread dimensions and types.) |
| NF E48-503-1987 | 液壓傳動.千斤頂.160bar小型A千斤頂活塞桿端頭的球頭銷定 | (HYDRAULIC FLUID POWER. CYLINDER. ROD END SPHERICAL EYE FOR 160 BAR SINGLE-ROD CYLINDER,COMPACT SERIE A.) |
| NF E49-001-1992 | 液壓動力.8bar巴單和雙端帶活塞桿氣缸.孔徑為25mm-200mm.安裝尺寸的互換性 | (Pneumatic fluid power. 8 bar single and double-ended piston rod cylinders. Bores from 25 mm up to 200 mm. Interchangeability and mounting dimensions.) |
| NF E49-003-1-1992 | 氣壓傳動.10bar氣缸.32mm-320mm缸筒.第1部分:單端帶活塞桿氣缸 | (PNEUMATIC FLUID POWER. CYLINDERS 10 BAR. BORE 32 MM TO 320 MM. INTERCHANGEABILITY DIMENSIONS. PART 1 : SINGLE-ENDED PISTON ROD CYLINDER.) |
| NF E49-003-3-1993 | 氣動液力傳動.10bar氣缸.互換性尺寸.第3部分:雙頭活塞桿氣缸 | (PNEUMATIC FLUID POWER. 10 BAR CYLINDERS. 32 MM TO 320 MM BORES. INTERCHANGEABILITY DIMENSIONS. PART 3 : DOUBLE-ENDED PISTON ROD CYLINDER.) |
| NF E49-003-4-1995 | 氣動液力傳動.10bar氣缸.32mm-320mm缸筒.第4部分:活塞桿端部帶統一互換銷的氣缸 | (PNEUMATIC FLUID POWER. 10 BAR CYLINDERS. 32 MM TO 320 MM BORES. INTERCHANGEABILITY DIMENSIONS. PART 4 : CYLINDER WITH ROD END WITH INTEGRATED PIN MOUNTING.) |
| NF R11-207-1-1989 | 內燃機.活塞環.第1部分:詞匯 | (INTERNAL COMBUSTION ENGINES. PISTON RINGS. PART 1 : VOCABULARY.) |
| NF R11-207-2-1989 | 內燃機.活塞環.第2部分:檢測原理 | (INTERNAL COMBUSTION ENGINES. PISTON RINGS. PART 2 : INSPECTION MEASURING PRINCIPLES.) |
| NF R11-207-3-2002 | 內燃機.活塞環.第3部分:材料規范 | (Internal combustion engines - Piston rings - Part 3 : material specifications.) |
| NF R11-207-4-1989 | 內燃機.活塞環.第4部分:總規范 | (INTERNAL COMBUSTION ENGINES. PISTON RINGS. PART 4 : GENERAL SPECIFICATIONS.) |
| NF R11-207-5-1989 | 內燃機.活塞環.第5部分:質量要求 | (INTERNAL COMBUSTION ENGINES. PISTON RINGS. PART 5 : QUALITY REQUIREMENTS.) |
| QC/T 284-1999(2005) | 汽車摩托車發動機球墨鑄鐵活塞環金相標準 | () |
| QC/T 39-1992(2005) | 汽車摩托車發動機活塞環檢測方法 | () |
| QC/T 554-1999(2005) | 汽車、摩托車發動機 活塞環技術條件 | () |
| QC/T 555-2000(2005) | 汽車、摩托車發動機 單體鑄造活塞環金相標準 | () |
| QC/T 737-2005 | 轎車發動機鑄鐵活塞環技術條件 | Specifications for cast-iron piston ring of passenger car engine |
| prEN 4198-1998 | 航空航天系列 耐腐蝕鋼桿、有自動潤滑襯墊和螺紋柄的可調自對中普通軸承活塞桿端 尺寸和負荷 | Aerospace series - Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel - Dimensions and loads |
| prEN 4351-1997 | 航空航天系列 耐腐蝕鋼帶自對中雙排滾珠軸承和帶螺紋柄的活塞桿端 尺寸和負荷 英制 | Aerospace series - Rod ends, with self-aligning double row ball bearings and threaded shank in corrosion resisting steel - Dimensions and loads - Inch series |
| 編號 | 中文名稱 | 英文名稱 |