| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF C61-305-1981 | 家用和類似用途的電器附件.木制踢腳板和木框用10/16A、250V插座口 | (Electrical accessories for domestic and similar purposes. 10/16 amperes 250 volts socket-outlets for wood baseboards and frames.) |
| NF C61-314-2003 | 家用和類似用途插頭和插座.6A/250V和16A/250V系統 | (Plugs and socket-outlets for household and similar purposes - 6 A / 250 V and 16 A / 250 V systems.) |
| NF C61-320-1981 | 額定電流為６A額定電壓為２５０V的可移式插座和插腳.規則 | (Electrical accessories for domestic and similar purposes. Plugs and socket-outlets and cable couplers rated 6 amperes and 250 volts.) |
| NF C63-300-1999 | 工業用插頭、插座和接線板.第5部分:一般要求 | (Plugs, socket-outlets and couplers for industrial purposes. Part 1 : general requirements.) |
| NF C63-310-1999 | 工業用插頭、插座和接線板.第2部分:對觸針和連接管附件尺寸的可互換性一要求 | (Plugs, socket-outlets and couplers for industrial purposes - Part 2 : dimensional interchangeability requirements for pin and contact-tube accessories.) |
| NF C93-406-2-102-2002 | 電子設備連接器.第2-102部分:經質量評定的圓形連接器.外部低電壓電源用插頭和插座的分規范 | (Connectors for electronic equipment - Part 2-102 : circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply.) |
| NF C93-406-5-2002 | 直流低頻模擬及數字高速數據應用系統用連接器. 第5部分:具有質量評定的在線插座.分規范 | (Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 5 : in-line sockets with assessed quality - Sectional specification.) |
| NF C93-424-1982 | 電子元件.連接元件.Ａ型插入式印刷電路板多觸點接頭及其相應的ＨＥ８型節距為１·２７mm的插座.一般規定 | (Electronic components. Connecting devices. Board mounted printed circuits connectors with contact and termination spacing of 1,27 mm. Type HE 8. General requirements.) |
| NF C93-427-1983 | 電子元件.連接元件.集成電路和其它插入元件用插座.ＳＣ型 | (ELECTRONIC COMPONENTS.CONNECTING DEVICES SOCKETS FOR INTEGRATED CIRCUIT AND OTHERS PLUG-IN COMPONENTS. GENERAL REQUIREMENTS.) |
| NF C93-428-1981 | 電子元件. 連接元件.與紗包電纜自動剝離間距為１·２７mm的Ａ型多觸點插入式接頭及其垂直距離為２·５４mm | (ELECTRONIC COMPONENTS. CONNECTING DEVICES. INSULATION DISPLACEMENT CONNECTORS. TYPE HE 10. GENERAL REQUIREMENTS.) |
| NF C93-430-12-1998 | 用于印制板的頻率低于3MHZ的連接件.第12部分:尺寸的詳細規范.用于集成電路的插座設計范圍內的試驗和一般要 | (Connectors for frequencies below 3 MHz for use with printed boards. Part 12 : detail specification for dimensions, general requirements and tests for a range of socket designed for use with integrated circuits.) |
| NF C93-903-39-1998 | 纖維光學互聯裝置和無源元件.基本試驗和測量過程.第3-39部分:試驗,檢驗和測量.PC-光學連接器參考插座的選擇 | (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-39 : tests. Examinations and measurements. PC optical connector reference plug selection.) |
| NF C93-909-051-3-2002 | 纖維光學內連接器件和無源元件性能標準.第051-3部分:U類用單膜光纖和插座式固定衰減器.非環境控制 | (Fibre optic interconnecting devices and passive components performance standard - Part 051-3 : single-mode fibre, plug-style fixed attenuators for category U - Uncontrolled environment.) |
| NF F50-009-1993 | 鐵路固定設備.絕緣固定插座 | (Railway fixed equipment. Isolating fermale fixing insert.) |
| NF L54-111-1966 | 飛行器電氣設備.常規用途插座.(RECH.) | (ELECTRICAL EQUIPMENT FOR AIRCRAFT. GENERAL PURPOSE SOCKETS. (RECH.).) |
| NF L54-115-1966 | 飛行器電氣設備.小型插座.(RECH.) | (ELECTRICAL EQUIPMENT FOR AIRCRAFT. SMALL SOCKETS. (RECH.).) |
| NF L54-120-1966 | 飛行器電氣設備.輕型插座.型號4 | (ELECTRICAL EQUIPMENT FOR AIRCRAFT. LIGHTWEIGHT SOCKETS. TYPE 4.) |
| NF L54-510-1966 | 飛行器電氣設備.20MM插頭的機場插座.(RECH.) | (ELECTRICAL EQUIPMENT FOR AIRCRAFT. AERODROME SOCKETS WITH 20 MM PINS. (RECH.).) |
| NF L54-520-1966 | 飛行器電氣設備.14MM插頭的機場插座.(RECH.) | (ELECTRICAL EQUIPMENT FOR AIRCRAFT. AERODROME SOCKETS WITH 14 MM PINS. (RECH.).) |
| NF L54-560-1966 | 飛行器電氣設備.115v直流用11MM插頭的機場插座.(RECH.) | (ELECTRICAL EQUIPMENT FOR AIRCRAFT. AERODROME SOCKETS WITH 11 MM PINS FOR 115 VOLTS DIRECT CURRENT. (RECH.).) |
| NF L94-111-1975 | 飛機地面注油管噴嘴的插頭和插座 | (Aircraft . Fuel nozzle grounding plugs and sockets.) |
| NF S76-024-2-1999 | 呼吸保護裝置.氣瓶閥.插座接頭 | (RESPIRATORY PROTECTIVE DEVICES. GAS CYLINDER VALVES. PART 2 : OUTLET CONNECTIONS. (EUROPEAN STANDARD EN 144-2).) |
| NF S95-111-1997 | 麻醉及呼吸設備.圓錐形連接器.第1部分:錐形頭和插座 | (Anaesthetic and respiratory equipment. Conical connectors. Part 1 : cones and sockets.) |
| NF T54-054-1997 | 塑料管道系統.未增塑聚氯乙烯端點負載軸承雙插座連接件.當彎曲和受到內壓時測定其防漏性和強度的試驗方法 | (Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double socket joints. Test method for leaktightness and strength while subjected to bending and internal pressure.) |
| 編號 | 中文名稱 | 英文名稱 |