| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 4950-1973 | 工程用噴涂和熔融金屬度層規范 | Specification for sprayed and fused metal coatings for engineering purposes |
| BS 5241-1-1994 | 建筑工地涂覆或噴涂用硬質聚氯酯泡沫塑料.第1部分:外部施覆的隔熱泡沫塑料 | Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam when dispensed or sprayed on a construction site - Specification for sprayed foam thermal insulation applied externally |
| BS 5241-2-1991 | 施工現場配制與噴涂用硬聚氨酯和聚異三聚氰脲酸酯泡沫塑料.第2部分:絕熱或彈性配制泡沫塑料的規范 | Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam when dispensed or sprayed on a construction site - Specification for dispensed foam for thermal insulation or buoyancy applications |
| BS 7021-1989 | 采用噴涂剛性聚氨基甲酸乙酯和聚異三聚氰脲酸酯泡沫對屋頂外部進行隔熱的實用規程 | Code of practice for thermal insulation of roofs externally by means of sprayed rigid polyurethane (PUR) or polyisocyanurate (PIR) foam |
| BS 7335-2-1991 | 整體耐火材料的安裝.噴涂式安裝實用規程 | Installation of monolithic refractories - Code of practice for installation by gunning |
| BS 8202-1-1995 | 建筑構件的防火涂層.無機物噴涂的選擇與設置實用規程 | Coatings for fire protection of building elements - Code of practice for the selection and installation of sprayed mineral coatings |
| BS 8216-1991 | 建筑物用隔熱和吸聲噴涂輕質礦物涂層實用規程 | Code of practice for use of sprayed lightweight mineral coatings used for thermal insulation and sound absorption in buildings |
| BS EN 1274-2005 | 熱噴涂.粉末.成分、交貨技術條件 | Thermal spraying - Powders - Composition, technical supply conditions |
| BS EN 12981-2005 | 涂層設備.噴涂有機粉末涂層材料的噴涂室.安全要求 | Coating plants - Spray booths for application of organic powder coating material - Safety requirements |
| BS EN 13214-2001 | 熱噴涂.熱噴涂協調.任務和責任 | Thermal spraying - Thermal spray coordination - Tasks and responsibilities |
| BS EN 13507-2001 | 熱噴涂.熱噴涂元件和金屬零部件表面預處理 | Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying |
| BS EN 1395-1-2007 | 熱噴涂.熱噴涂設備的驗收檢驗.一般要求 | Thermal spraying - Acceptance inspection of thermal spraying equipment - General requirements |
| BS EN 1395-1996 | 熱噴涂.熱噴涂設備的驗收檢驗 | Thermal spraying - Acceptance inspection of thermal spraying equipment |
| BS EN 1395-2-2007 | 熱噴涂.熱噴涂設備的驗收檢驗.包括超音速火焰噴涂(HVOF)的火焰噴涂 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Flame spraying including HVOF |
| BS EN 1395-3-2007 | 熱噴涂.熱噴涂設備的驗收檢驗.電弧噴涂 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Arc spraying |
| BS EN 1395-4-2007 | 熱噴涂.熱噴涂設備的驗收檢驗.等離子噴涂 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Plasma spraying |
| BS EN 1395-5-2007 | 熱噴涂.熱噴涂設備的驗收檢驗.室內等離子噴涂 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Plasma spraying in chambers |
| BS EN 1395-6-2007 | 熱噴涂.熱噴涂設備的驗收檢驗.操作裝置 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Manipulator systems |
| BS EN 1395-7-2007 | 熱噴涂.熱噴涂設備的驗收檢驗.粉末配送系統 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Powder feed system |
| BS EN 13966-1-2003 | 液態涂層材料用霧化及噴涂設備輸送效率的測定.平板條 | Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Flat panels |
| BS EN 14616-2005 | 熱噴涂.熱噴涂的推薦 | Thermal spraying - Recommendations for thermal spraying |
| BS EN 14665-2005 | 熱噴涂.熱噴涂覆層.圖紙上的符號表示 | Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings |
| BS EN 15311-2007 | 熱噴涂.熱噴覆層元部件.技術供貨條件 | Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions |
| BS EN 15339-2-2007 | 熱噴涂.熱噴涂設備的安全要求.氣體控制部件 | Thermal spraying - Safety requirements for thermal spraying equipment - Gas control units |
| BS EN 15340-2007 | 熱噴涂.熱噴涂層耐剪切負荷的測定 | Thermal spraying - Determination of shear load resistance of thermally sprayed coatings |
| BS EN 15520-2007 | 熱噴涂.熱噴覆層組件結構設計的推薦實施規程 | Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings |
| BS EN 50050-2006 | 潛在爆炸環境用電氣設備.手持式靜電噴涂設備 | Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment |
| BS EN 50059-1991 | 涂漆及拋光用不易燃材料手持靜電噴涂設備規范 | Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing |
| BS EN 50176-1997 | 易燃液體噴涂材料用自動靜電噴涂裝置 | Automatic electrostatic spraying installations for flammable liquid spraying material |
| BS EN 50177-1997 | 易燃噴涂粉末用自動靜電噴涂裝置 | Automatic electrostatic spraying installations for flammable coating powder |
| BS EN 50177-2006 | 易燃噴涂粉末用自動靜電噴涂設備 | Automatic electrostatic spraying equipment for flammable coating powder |
| BS EN 582-1994 | 熱噴涂層的試驗.抗拉膠粘強度的測定 | Thermal spraying - Determination of tensile adhesive strength |
| BS EN 657-2005 | 熱噴涂.術語和分類 | Thermal spraying - Terminology, classification |
| BS EN ISO 14918-1998 | 熱噴涂.熱噴涂人員資格測試 | Thermal spraying - Approval testing of thermal sprayers |
| BS EN ISO 14919-2001 | 熱噴涂.熔噴和電弧噴涂用線材、桿材和軟線.分類.技術支持條件 | Thermal spraying, Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions |
| BS EN ISO 14920-1999 | 熱噴涂.自熔合金的熔化和噴涂 | Thermal spraying - Spraying and fusing of self-fluxing alloys |
| BS EN ISO 14921-2001 | 熱噴涂.工程元件的熱噴涂應用方法 | Thermal spraying - Procedure for the application of thermally sprayed coatings for engineering components |
| BS EN ISO 14922-1-1999 | 熱噴涂.熱噴涂結構件的質量要求.選擇和使用導則 | Thermal spraying - Quality requirements of thermally sprayed structures - Guidance for selection and use |
| BS EN ISO 14922-2-1999 | 熱噴涂.熱噴涂結構件的質量要求.綜合質量要求 | Thermal spraying - Quality requirements of thermally sprayed structures - Comprehensive quality requirements |
| BS EN ISO 14922-3-1999 | 熱噴涂.熱噴涂結構件的質量要求.標準質量要求 | Thermal spraying - Quality requirements of thermally sprayed structures - Standard quality requirements |
| BS EN ISO 14922-4-1999 | 熱噴涂.熱噴涂結構件的質量要求.基本質量要求 | Thermal spraying - Quality requirements of thermally sprayed structures - Elementary quality requirements |
| BS EN ISO 14924-2005 | 熱噴涂.熱噴涂覆層的后處理和精加工 | Thermal spraying - Post-treatment and finishing of thermally sprayed coatings |
| BS EN ISO 17834-2003 | 熱噴涂.高溫腐蝕和氧化防護涂層 | Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures |
| BS EN ISO 17836-2004 | 熱噴涂.沉積效率的測定 | Thermal spraying - Determination of the deposition efficiency |
| BS EN ISO 8028-2000 | 無空氣涂料噴涂用塑料和/或橡膠軟管組件.規范 | Rubber and/or plastics hose assemblies for airless paint spraying - Specification |
| BS ISO 15643-2002 | 道路建設和維修設備.瀝青粘合劑攤鋪機/噴涂機.術語和商業規范 | Road construction and maintenance equipment - Bituminous binder spreaders/sprayers - Terminology and commercial specifications |
| 編號 | 中文名稱 | 英文名稱 |