| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI ATIS0900002-2009 | 同步標準.辦公室內基于以太網的時間分配用物理互連 | Synchronization Standard - Physical Interconnection for Intra-Office Ethernet-based Timing Distribution |
| ANSI ATIS1000026-2008 | 時間/邊界控制功能和要求 | Sessions/Border Control Functions and Requirements |
| ANSI C37.06.1-2000 | 快速瞬時恢復壓升時間(非美國標準)用指定對稱電流基礎額定值的高壓斷路器試用指南 | High-Voltage Circuit Breakers Rated on a Symetrical Current Basis Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times |
| ANSI INCITS 310-1998(R2003) | 信息技術用美國國家標準.信息交換時間的表示 | for Information Technology – Representation of Time for Information Interchange |
| ANSI INCITS310-1998 | 信息技術.信息交換用時間的表示法 | Information Technology - Representation of Time for Information Interchange |
| ANSI INCITS346-2001 | 信息技術.防護區運行時間接口擴展服務(PARTIES) | Information Technology - Protected Area Run Time Interface Extension Services (PARTIES) |
| ANSI ISO 19108-2002(R2008) | 地理信息.時間計劃 | Geographic information — Temporal schema |
| ANSI NCITS 310-1998 | 信息技術.信息交換用時間的表示 | Information Technology - Representation of Time for Information Interchange |
| ANSI X9.95-2005 | 可信時間戳管理和安全 | Trusted Time Stamp Management and Security |
| ANSI/(NFPA) T3.21.8-2008 | 氣液傳動.響應時間的測量.方向控制閥 | Pneumatic fluid power - Measurement of response time - Directional control valves |
| ANSI/ANS 58.8-1994 | 核電站.有關安全操作人員行為的時間響應設計準則 | Nuclear Power Plants – Time Response Design Criteria for Safety Related Operator Actions |
| ANSI/ASTM D1901-2000 | 鹵化有機溶劑及其攙合物相對蒸發時間測試方法 | Test Method for Relative Evaportation Time of Halogenated Organic Solvents and their Admixtures |
| ANSI/ASTM D2471-1999 | 活性熱固樹脂膠凝時間和最大放熱溫度測試方法(08.02) | Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins (08.02) |
| ANSI/ASTM D3056-2005 | 無溶劑清漆膠凝時間的試驗方法 | Test Method for Gel Time of Solventless Varnishes |
| ANSI/ASTM D3895-1998 | 熱分析法測定聚烯烴氧化感應時間的方法 | Test Method for Oxidative Induction Time of Polyolefins by Thermal Analysis (08.03) |
| ANSI/ASTM D5455-1993 | 短時間里液體被吸入紙內的試驗方法(BRISTOW試驗) | Test Method for Short-Term Liquid Sorption Into Paper (Bristow Test) |
| ANSI/ASTM D635-1998 | 水平位置自支撐式塑料的燃燒率和/或燃燒程度與燃燒時間測試驗方法 | Test Method for Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position (08.01) |
| ANSI/ASTM E1666-1995 | 辦公設施關于正常時間或條件以外的工作的適用性分類 | Classification for the Serviceability of an Office Facility for Work Outside Normal Hours or Conditions (04.11) |
| ANSI/ASTM E1666-1995A | 辦公設施關于正常時間或條件以外的工作的適用性分類 | Classification for the Serviceability of an Office Facility for Work Outside Normal Hours or Conditions |
| ANSI/ASTM E1666a-1995 | 辦公設施正常時間和條件以外工作的功能分類(04.11) | Classification for the Serviceability of an Office Facility for Work Outside Normal Hours or Conditions (04.11) |
| ANSI/ASTM E292-2001 | 材料斷裂缺口拉伸試驗執行時間測試方法 | Test Methods for Conducting Time for Rupture Notch Tension Tests of Materials |
| ANSI/ASTM F2018-2000 | 使用水平應力拉伸樣品測定塑料失效時間的試驗方法 | Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens |
| ANSI/ASTM F948-1994 | 固定流體內壓下塑料管道系統和組件失效時間-試驗方法 | Test Method for Time-to-Failure of Plastic Piping Systems and Components under Constant Internal Pressure with Flow |
| ANSI/ATIS 1000026-2008 | 時間/邊界控制功能和要求 | Sessions/Border Control Functions and Requirements |
| ANSI/AWWA C750-2003 | 全閉路導管中運送時間流量計 | Transit-Time Flowmeters in Full Closed Conduits |
| ANSI/EIA 364-102-1998 | 電連接器、插孔、電纜組件或互連裝置的上升時間衰減試驗程序 | Rise Time Degradation Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems |
| ANSI/EIA-364-102-1998 | 電連接器、插座、電纜附件或互連系統上升時間降低試驗程序 | Rise Time Degradation Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems |
| ANSI/EIA-364-108-2000 | 電連接器、電纜附件或互連系統在時間和頻率域中測量的阻抗、反射系數、回程損耗和VSWR試驗程序 | Impedance, Reflection Coefficient, Return Loss, and VSWR Test Procedure Measured in the Time and Frequency Domain for Electrical Connectors, Cable Assemblies or Interconnection Systems |
| ANSI/IEEE 1139-2008 | 基本頻率和時間計量學用物理量標準定義.隨機不穩定性 | Standard Definitions of Physical Quantities for Fundamental Frequency and Time Metrology - Random Instabilities |
| ANSI/IEEE 1646-2004 | 電力變電所自動化用標準通訊傳輸時間性能要求 | Standard Communication Delivery Time Performance Requirements for Electric Power Substation Automation |
| ANSI/IEEE C37.20.1a-2005 | 金屬殼密封的低壓電力線路斷路器開關設備標準.修改1:短時間和短路可耐電流測試;多電纜連接的最小區域 | Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear - Amendment 1: Short-Time and Short-Circuit Withstand Current Tests; Minimum Areas for Multiple Cable Connections |
| ANSI/IEEE C57.109-1993 | 液浸式變壓器穿越故障電流持續時間的指南 | Guide for Liquid-Immersed Transformer Through-Fault Current Duration |
| ANSI/IEEE C57.12.59-2002 | 干式變壓器全故障電流持續時間指南 | Guide for Dry-Type Transformer Through-Fault Current Duration |
| ANSI/INCITS/ISO/IEC 18014-2-2002 | 信息技術.保密技術.時間標記業務.第2部分:產生獨立標權的機構 | Information technology - Security techniques - Time-stamping services - Part 2: Mechanisms producing independent tokens |
| ANSI/INCITS/ISO/IEC 18014-3-2004 | 信息技術.安全技術.時間標記業務.第3部分:產生鏈接標記的機制 | Information technology - Security techniques - Time-stamping services - Part 3: Mechanisms producing linked tokens |
| ANSI/ISO/IEC 13818-9-1996 | 信息技術.移動畫面和有關音頻信息的通用編碼.第9部分:系統解碼器的實時時間接口的拓展 | Information technology - Generic coding of moving pictures and associated audio information - Part 9: Extension for real time interface for systems decoders |
| ANSI/UL 796a-2007 | 印制電路板的安全標準(提議時間2007.09.28) | Standard for Safety for Printed-Wiring Boards (Proposal dated September 28, 2007) |
| ASME MFC-5M-1985 | 在封閉導管中用渡越時間超聲波流量計測量液體流量 | (Measurement of liquid flow in closed conduits using transit-time ultrasonic flowmeters) |
| ASME Y10.3M-1984 | 機械和與時間相關的現象用字母符號 | (Letter symbols for mechanics and time-related phenomena) |
| ASTM C1291-2000a(2005) | 高級單片陶瓷的高溫抗拉蠕變應變,蠕變應變率及蠕變斷裂時間的標準試驗方法 | Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics |
| ASTM C1398-2007 | 用吉爾摩(Gillmore)針法測定噴漿用含添加劑水硬水泥灰漿凝固時間的實驗室標準試驗方法 | Standard Test Method for The Laboratory Determination of the Time of Setting of Hydraulic-Cement Mortars Containing Additives for Shotcrete by the Use of Gillmore Needles |
| ASTM C308-2000(2005) | 耐化學腐蝕樹脂灰漿施工時間、凝固時間及維護凝固強度時間的標準試驗方法 | Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars |
| ASTM C953-2006 | 實驗室內測定預置集料混凝土的灌漿料凝固時間的標準試驗方法 | Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory |
| ASTM D1363-2006 | 丙銅和甲醇的高錳酸鹽時間的標準測試方法 | Standard Test Method for Permanganate Time of Acetone and Methanol |
| ASTM D1545-2007 | 用起泡時間法測定透明液體粘度的標準試驗方法 | Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method |
| ASTM D1721-1997(2007) | 磷酸三甲苯酯的高錳酸鹽時間的測試方法 | Standard Test Method for Permanganate Time of Tricresyl Phosphate |
| ASTM D1901-2000(2004) | 鹵化有機溶劑及其添加劑相對蒸發時間的標準試驗方法 | Standard Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures |
| ASTM D2396-1994(2004) | 用轉矩流變儀測定聚氯乙烯(PVC)粉末混合時間的標準試驗方法 | Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer |
| ASTM D3014-2004a | 硬質熱固性泡沫塑料在垂直狀態時火焰高度、燃燒時間和質量損失的標準試驗方法 | Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position |
| ASTM D3056-2005 | 無溶劑清漆凝固時間的標準試驗方法 | Standard Test Method for Gel Time of Solventless Varnishes |
| ASTM D3732-1982(2005) | 紫外線固化涂料固化時間的報告 | Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings |
| ASTM D3895-2007 | 用差示掃描量熱法測定聚烯烴的氧化感應時間的標準試驗方法 | Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry |
| ASTM D4217-2007 | 熱固涂料粉末的膠凝時間用標準試驗方法 | Standard Test Method for Gel Time of Thermosetting Coating Powder |
| ASTM D4497-1994(2004)e1 | 熱熔膠粘劑斷開時間測定的標準試驗方法(手工法) | Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method) |
| ASTM D4680-1998(2004) | 用壓縮負荷靜剪切法法測定膠粘劑蠕變和老化時間的標準試驗方法(木材對木材) | Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
| ASTM D5405-1998(2004) | 非瀝青質有機屋面薄膜材料接縫的蠕變斷裂時間標準試驗方法 | Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material |
| ASTM D5455-1993(2003) | 紙中短時間液體吸附的標準試驗方法(BRISTOW試驗) | Standard Test Method for Short-Term Liquid Sorption Into Paper (Bristow Test) |
| ASTM D5885-2006 | 用高壓差示掃描量熱法測定聚烯烴土工合成織物的氧化感應時間的標準試驗方法 | Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry |
| ASTM D5909-1996a(2006) | 用角鯊烯抗性測試氧化物干燥印刷油墨干燥時間的標準試驗方法 | Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance |
| ASTM D6325-1998(2004) | 測定地毯膠合鋪料粘合劑的開放裝配時間的試驗方法 | Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives |
| ASTM D635-2006 | 塑料在水平狀態時的燃燒速率或者燃燒蔓延程度及燃燒時間的標準試驗方法 | Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position |
| ASTM D6383-1999(2005) | 由EPDM屋頂膜材料制造的膠粘劑接頭的失效時間(蠕變破裂)的標準操作規程 | Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material |
| ASTM D6780-2005 | 時間域反射測量法現場測定土壤含水量和密度的標準試驗方法 | Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR) |
| ASTM D6815-2002a | 木制和木基產品的荷載和蠕變效應的持續時間的評價的標準規范 | Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products |
| ASTM D6820-2002(2007) | 次表面探查用時間域電磁法的使用標準指南 | Standard Guide for Use of the Time Domain Electromagnetic Method for Subsurface Investigation |
| ASTM D711-1989(2004) | 路標漆不粘著時間的試驗方法 | Standard Test Method for No-Pick-Up Time of Traffic Paint |
| ASTM D7134-2005 | 用矩陣輔助激光解吸/離子化(MALDI)-飛行時間(TOF)質譜(MS)法測定無規立構聚苯乙烯的平均分子量和分子量分布 | Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS) |
| ASTM D7278-2006 | 分析儀抽樣系統遲延時間預測的標準指南 | Standard Guide for Prediction of Analyzer Sample System Lag Times |
| ASTM D7406-2007 | 土工合成排水產品用常壓下隨時間變化的(蠕變)變形用標準試驗方法 | Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products |
| ASTM E1666-1995a(2005) | 辦公設備對于正常時間或條件以外的工作的適用性標準分類 | Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions |
| ASTM E1860-2007 | 消逝時間校正熱分析儀的標準試驗方法 | Standard Test Method for Elapsed Time Calibration Thermal Analyzers |
| ASTM E1909-1997(2003) | 感官特征時間強度評價的標準指南 | Standard Guide for Time-Intensity Evaluation of Sensory Attributes |
| ASTM E2109-2001(2007) | 用熱分析法測定反應感應時間的標準試驗方法 | Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings |
| ASTM E2426-2005 | 用SIMS測量同位素比率對脈沖計算系統死時間測定的標準實施規程 | Standard Practice for Pulse Counting System Dead Time Determination by Measuring Isotopic Ratios with SIMS |
| ASTM F1260M-1996(2003) | 集成電路金屬噴鍍總量和電遷移中值失效時間的評定標準試驗方法(米制單位) | Standard Test Method for Estimating Electromigration Median Time-to-Failure and Sigma of Integrated Circuit Metallizations [Metric] |
| ASTM F1536-1995(2005) | 水激活合成聚氨酯玻璃纖維矯型鑄帶強度和凝固時間測定的標準試驗方法 | Standard Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape |
| ASTM F2018-2000(2006) | 使用平應力拉伸樣品測定塑料老化時間的標準試驗方法 | Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens |
| ASTM F2382-2004e1 | 根據部分促凝血酶原激酶時間評估血管內醫療設備材料的標準試驗方法 | Standard Test Method for Assessment of Intravascular Medical Device Materials on Partial Thromboplastin Time (PTT) |
| ASTM F2498-2005 | 用煙熏法測定噴墨介質和墨水的干燥時間的標準實施規程 | Standard Practice for Determining the Drying Time of Inkjet Media and Inks Using a Smudge Method |
| ASTM F948-1994(2006) | 在恒定內流動壓力下塑料管道系統和組件損壞時間的標準試驗方法 | Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow |
| ASTM G84-1989(2005) | 在大氣腐蝕測試中表面暴露在潮濕條件下濕潤時間的測量 | Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing |
| IEEE 1139-1999 | 基本頻率和時間計量學用物理量定義.隨機不穩定性 | (Definitions of physical quantities for fundamental frequency and time metrology - Random instabilities) |
| IEEE C 37.112-1996 | 過流繼電器反向時間特性方程式 | (Inverse-time characteristic equations for overcurrent relays) |
| IEEE C 57.12.59-2001 | 干式變壓器直通故障電流持續時間指南 | (Guide for dry-type transformer through-fault current duration) |
| UL 863-1997 | 時間顯示和記錄裝置 | (Time-indicating and -recording appliances ) |
| 編號 | 中文名稱 | 英文名稱 |