| 編號 | 中文名稱 | 英文名稱 |
|---|
| UL 1105-1998 | 船用過濾器、凈化器和分離器 | (Marine use filters, strainers and separators ) |
| UL 1129-1999 | 船用發動機排濕部件 | (Wet exhaust components for marine engines ) |
| UL 1102-1999 | 非整體船用燃料貯罐 | (Nonintegral marine fuel tanks ) |
| UL 1130-1999 | 船用機械和電子控制燃油泵 | (Mechanically and electrically operated fuel pumps for marine use ) |
| UL 1112-1997 | 船用電動機和發電機(啟動、外驅動傾角、配平片、發電機、交流發電機) | (Marine electric motors and generators (cranking, outdrive tilt, trim tab, generators, alternators) ) |
| UL 1121-1998 | 船用貫穿船身的配件和舷側進水閥 | (Marine through-hull fittings and sea-valves ) |
| UL 1128-1997 | 船用鼓風機 | (Marine blowers ) |
| UL 1426-2001 | 船用電纜 | (Electrical cables for boats ) |
| UL 1111-1988 | 船用化油器火焰消除裝置 | (Marine carburetor flame arresters ) |
| UL 1149-1994 | 船用低壓照明設備 | (Low voltage marine lighting fixtures ) |
| UL 458-1993 | 陸上車輛和船用電源變換器及其系統 | (Power converters/inverters and power converter/inverter systems for land vehicles and marine crafts ) |
| UL 1123-1996 | 船用浮力救生器材 | (Marine buoyant devices ) |
| ASTM F 1298-1990 | 船用柔性擴展型球連接 | Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications |
| ASTM F 1338-1991 | 船用主動力中速柴油發動機覆蓋性能和機組最小工作范圍 | Main Propulsion Medium Speed Marine Diesel Engines Covering Performance and Minimum Scope of Assembly |
| ANSI/SAE J620-1993 | 與配備驅動環型偏心離合器及安裝船用齒輪發動機的工業動力輸出軸一起使用的工業發動機的飛輪 | Flywheels for Industrial Engines Used With Industrial Power Take-Offs Equipped With Driving-Ring Type Overcenter Clutches and Engine Mounted Marine Gears |
| ANSI/AGMA 6032-A-1994 | 船用齒輪裝置標準:等級 | Standard for Marine Gear Units: Rating |
| ANSI/ASTM F1166-1995 | 船用系統、設備和設施人機工程學設計慣例 | Practice for Human Engineering Design for Marine Systems, Equipment and Facilities |
| ANSI/ASTM F1073-1987 | 船用防水、防氣體/防空氣和防風雨門配件和非密封門規范 | Specification for Door Fittings, for Watertight/Gastight/Airtight, Weathertight, and Non-Tight Doors, for Marine Use |
| ANSI/ASTM F1070-1987 | 船用非鎖閉門規范 | Specification for Doors, Non-Tight, for Marine Use |
| ANSI/ASTM F1069-1987 | 船用單扇防水、防氣體/防空氣和防風雨門規范 | Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use |
| ANSI/ASTM F826-1994 | 頂蓋、家具船用鋼規范 | Specification for Tops, Furniture, Marine, Steel |
| ANSI/ASTM F825-1993 | 抽屜、家具船用鋼規范 | Specification for Drawers, Furniture, Marine, Steel |
| ANSI/ASTM F824-1993 | 桌子、餐廳船用鋼規范 | Specification for Tables, Mess, Marine, Steel |
| ANSI/ASTM F823-1993 | 帶客艙的甲板和計程儀的船用鋼規范 | Specification for Desk, Log, Marine, Steel, with Cabinet |
| ANSI/ASTM F822-1993 | 抽屜箱船用鋼規范 | Specification for Chest of Drawers (Chiffonier), Steel, Marine |
| ANSI/ASTM F1121-1987 | 船用火災設備的國際海岸連接方式規范 | Specification for International Shore Connections for Marine Fire Applications |
| ANSI/ASTM F1384-1993 | 船用接合門著火試驗慣例 | Practice for Fire Tests of Marine Joiner Doors |
| ANSI/SAE J1527-1993 | 船用燃料軟管 | Marine Fuel Hoses |
| ANSI/ASTM F1068-1990 | 船用單扇固定防氣體/防空氣的雙層門的規范 | Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use |
| ANSI/ASTM F1309-1998 | 船用機械基座固定楔安裝程序慣例 | Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations |
| ANSI/ASTM F1322-1990 | 船用焚燒裝置選用指南 | Guide for Selection of Shipboard Incinerators |
| ANSI/ASTM F1323-2001 | 船用焚燒裝置規范 | Specification for Shipboard Incinerators |
| ANSI/ASTM F906-1985 | 海船用字母和數字規范 | Specification for Letters and Numerals for Ships |
| ANSI/ASTM F840-1983 | 垂向固定梯子船用鋼的規范 | Specification for Ladders, Fixed, Vertical, Steel, Ships |
| ANSI/ASTM D2481-1996 | 用小尺寸樣品加速評定船用木材防腐劑的方法 | Method for Accelerated Evaluation of Wood Preservatives for Marine Service by Means of Small-Size Specimens |
| ANSI/ASTM F782-2001 | 船用家具門規范 | Specification for Doors, Furniture, Marine |
| ANSI/ASTM F1006-1997 | 船用管道裝置用液滴分離器規范 | Specification for Entrainment Separators for Use in Marine Piping Applications |
| ANSI/ASTM F1007-1997 | 船用套裝滑動型管道膨脹節規范 | Specification for Pipe-Line Expansion Joints of the Packed Slip Type for Marine Application |
| ANSI/ASTM F1020-1997 | 船用管路截流閥慣例 | Practice for Line Blind Valves for Marine Applications |
| ANSI/ASTM F1134-1997 | 船用電動機和發電機絕緣電阻監測器規范 | Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators |
| ANSI/ASTM F1173-2001 | 船用熱固樹脂玻璃纖維管和配件規范 | Specification for Thermosetting Resin Fiberglass Pipe and Fittings to be Used for Marine Applications |
| ANSI/ASTM F1716-1997 | 船用軟件系統性能和轉換維護指南 | Guide for Transition and Performance of Marine Software Systems Maintenance |
| ANSI/ASTM F1669M-1997 | 船用電氣系統絕緣監視器規范(米制) | Specification for Insulation Monitors for Shipboard Electrical Systems (Metric) |
| ANSI/ASTM F1338-1997 | 船用主動力中速柴油發動機覆蓋性能和機組最小工作范圍指南 | Guide for Main Propulsion Medium Speed Marine Diesel Engines Covering Performance and Minimum Scope of Assembly |
| ANSI/ASTM F1245-1997 | 船用壓縮和自閉型單式與雙式水龍頭規范 | Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| ANSI/ASTM F1298-1997 | 船用柔性擴展型球連接規范 | Specification for Flexible, Expansion-Type Ball Joints for Marine Applications |
| ANSI/ASTM F998-2004 | 船用離心泵規范 | Specification for Centrifugal Pump, Shipboard Use |
| ANSI/ASTM F1014-2002 | 船用閃光燈規范 | Specification for Flashlights on Vessels |
| ANSI/ASTM F1455-1992 | 造船用結構部件的選擇指南 | Guide for Selection of Structural Details for Ship Construction |
| ANSI/ASTM F1370-1992 | 艦船用水系統減壓閥的規范 | Specification for Pressure-Reducing Valves for Water Systems, Shipboard |
| ANSI/ASTM F1099-1998 | 船用防鼠裝置的標準規范 | Specification for Rat Guards, Ship's |
| ANSI/ASTM F1507-2000 | 船用電涌抑制器標準規范 | Specification for Surge Suppressors for Shipboard Use |
| ANSI/ASTM F1755/F 1755M-1996 | 船用固態線條圖形測量器標準規范(米制) | Specification for Solid State Bargraph Meters for Shipboard Use [Metric] |
| ANSI/ASTM F940-2000 | 海上建筑物及造船用保護性涂料的質量控制驗收檢驗程序的標準操作規程 | Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
| ASTM F 906-1985 | 船用字母及數碼 | Standard Specification for Letters and Numerals for Ships |
| ASTM F 1007-1986 | 套裝滑動成型或船用管道膨脹節 | Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application |
| ASTM F 1006-1986 | 船用管道裝置用液滴分離器 | Entrainment Separators for Use in Marine Piping Applications |
| ASTM F 1020-1986 | 船用暗線閥 | Standard Specification for Line-Blind Valves for Marine Applications |
| ASTM F 1070-1987 | 船用非密閉門 | Standard Specification for Doors, Non-Tight, for Marine Use |
| ASTM F 1069-1987 | 船用水密,氣密/不透氣和不透風各扇單獨安夾扣的門 | Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use |
| ASTM F 1073-1987 | 船用水密,氣密/不透氣和防風雨及無夾扣門的門配件 | Standard Specification for Door Fittings, for Watertight/Gastight/Airtight, Weathertight, and Non-Tight Doors, for Marine Use |
| ASTM F 1068-1990 | 船用耐氣密造/不透氣雙層單獨安夾扣的門標準規范 | Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use |
| ASTM F 1099-1990 | 船用防鼠裝置 | Rat Guards, Ship's |
| ASTM F 840-1983 | 船用垂直固定式鋼舷梯 | Standard Specification for Ladders, Fixed, Vertical, Steel, Ship's |
| ASTM F 1507-1994 | 船用電涌抑制器標準規范 | Standard Specification for Surge Suppressors for Shipboard Use |
| ASTM F 826-1994 | 鋼制船用家具頂蓋 | Standard Specification for Tops, Furniture, Marine, Steel |
| ASTM F 823-1993 | 船用木制有鋼柜的辦公桌 | Standard Specification for Desk, Log, Marine, Steel, with Cabinet |
| ASTM F 822-1993 | 船用鋼櫥柜(碗碟柜) | Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine |
| ASTM F 1134-1994 | 船用電動機和發電機絕緣電阻監測器 | Standard Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators |
| ASTM F 1455-1992 | 造船用結構部件選擇的標準導則 | Standard Guide for Selection of Structural Details for Ship Construction |
| ASTM F 824-1993 | 船用鋼制餐桌 | Standard Specification for Tables, Mess, Marine, Steel |
| ASTM F 765-1993 | 船用錨鏈及錨鏈輪 | Standard Specification for Wildcats, Ship Anchor Chain |
| ASTM D 880-1992 | 船用集裝箱的沖擊試驗的試驗方法 | Test Method for Impact Testing for Shipping Containers and Systems |
| ASTM F 1716-1996 | 船用軟件系統的性能和轉換維護用標準導則 | Standard Guide for Transition and Performance of Marine Software Systems Maintenance |
| ASTM F 1323-2001 | 船用焚燒裝置標準規范 | Standard Specification for Shipboard Incinerators |
| ASTM F 1309-1998 | 船用機械基礎制動器的安裝程序的標準操作規程 | Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations |
| ASTM F 1099M-1998 | 船用米制雷達警戒裝置的標準規范 | Standard Specification for Rat Guards, Ship's (Metric) |
| ASTM F 940-1999 | 海上建筑物及造船用保護性涂料的質量控制驗收檢驗程序的標準操作規程 | Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
| ASTM D 642-2000 | 確定船用集裝箱、組合件和單體加載的抗壓縮能力的標準試驗方法 | Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads |
| ASTM F 782-2001 | 船用家具門的標準規范 | Standard Specification for Doors, Furniture, Marine |
| ASTM F 1510-2001 | 商業船用旋轉式正排量泵標準規范 | Standard Specification for Rotary Positive Displacement Pumps, Commercial Ships Use |
| ASTM A 131/A 131Ma-2004 | 船用結構鋼的標準規范 | Standard Specification for Structural Steel for Ships |
| ASTM F 998-2004 | 船用離心泵標準規范 | Standard Specification for Centrifugal Pump, Shipboard Use |
| ASTM D 2481-2005 | 用小尺寸樣品加速評定船用木材防腐劑的標準試驗方法 | Standard Test Method for Accelerated Evaluation of Wood Preservatives for Marine Services by Means of Small Size Specimens |
| 編號 | 中文名稱 | 英文名稱 |
|---|