Perl的散列(hash)
返回
修改零件的數量
<![CDATA[
use strict;
my(%t,$n,$n1,$n2);
$t{type1id} = '245==332';
$t{partsid} = '3=2=4==2=8';
$t{QTY} = '30=20=40==20=80';
$t{type1id2} = '245==332';
$t{partsid2} = '4==2=8';
$t{QTY2} = '40==20=80';
@{ $t{QTYnew} } = qw/300 200 400 200 800/;
@{ $t{ttt1} } = split(/==/,$t{type1id});
@{ $t{ppp1} } = split(/==/,$t{partsid});
$t{NO}=0;
@{ $t{qqq3} } = ();
for $n ( 0 .. $#{ $t{ttt1} } ) {
$t{ttt2} = $t{ttt1}[$n];
$t{ppp2} = $t{ppp1}[$n];
@{ $t{ppp3} } = split(/=/,$t{ppp2});
@{ $t{qqq1} } = ();
for $n1 ( 0 .. $#{ $t{ppp3} } ) {
$t{NO}++;
$t{ppp4} = $t{ppp3}[$n1];
$t{tp_qty}{$t{ttt2}}{$t{ppp4}} = $t{QTYnew}[$t{NO}-1];
push(@{ $t{qqq1} },$t{QTYnew}[$t{NO}-1]);
}
$t{qqq2} = join('=',@{ $t{qqq1} });
push(@{ $t{qqq3} },$t{qqq2});
}
$t{qqq4} = join('==',@{ $t{qqq3} });
print "enq1 result:\n";
print "old==>$t{QTY}\n";
print "new==>$t{qqq4}\n\n";
@{ $t{ttt1} } = split(/==/,$t{type1id2});
@{ $t{ppp1} } = split(/==/,$t{partsid2});
$t{NO}=0;
@{ $t{qqq3} } = ();
for $n ( 0 .. $#{ $t{ttt1} } ) {
$t{ttt2} = $t{ttt1}[$n];
$t{ppp2} = $t{ppp1}[$n];
@{ $t{ppp3} } = split(/=/,$t{ppp2});
@{ $t{qqq1} } = ();
for $n1 ( 0 .. $#{ $t{ppp3} } ) {
$t{NO}++;
$t{ppp4} = $t{ppp3}[$n1];
push(@{ $t{qqq1} },$t{tp_qty}{$t{ttt2}}{$t{ppp4}});
}
$t{qqq2} = join('=',@{ $t{qqq1} });
push(@{ $t{qqq3} },$t{qqq2});
}
$t{qqq4} = join('==',@{ $t{qqq3} });
print "enq2 result:\n";
print "old==>$t{QTY2}\n";
print "new==>$t{qqq4}\n\n";
enq1 result:
old==>30=20=40==20=80
new==>300=200=400==200=800
enq2 result:
old==>40==20=80
new==>400==200=800
]]>
# 必須置零,因為下一臺主機的DWG極有可能同名!
<![CDATA[
@{ $t{plist}{id}{$t{dwg1}} } = ();
@{ $t{plist}{name}{$t{dwg1}} } = ();
@{ $t{plist}{code}{$t{dwg1}} } = ();
@{ $t{plist}{QTY}{$t{dwg1}} } = ();
@{ $t{plist}{Nuid}{$t{dwg1}} } = ();
]]>
把復數的enq2價格歸并到一個enq1
<![CDATA[
$t{enq2s} = $self->dbh->selectrow_array("SELECT enq2s FROM enq1 WHERE id = $t{quo2_id}");
@{ $t{enq2_ids} } = split(/=/,$t{enq2s});
for $n ( 0 .. $#{ $t{enq2_ids} } ) {
$t{enq2_id} = $t{enq2_ids}[$n];
($t{type1id},$t{partsid},$t{price}) = $self->dbh->selectrow_array("SELECT type1id,partsid,price FROM enq2 WHERE id = $t{enq2_id}");
@{ $t{tts} } = split(/==/,$t{type1id});
@{ $t{pps} } = split(/==/,$t{partsid});
@{ $t{pps2} } = split(/=/,$t{price});
$t{NO} = 0;
for $n1 ( 0 .. $#{ $t{tts} } ) {
$t{tts1} = $t{tts}[$n1];
$t{pps1} = $t{pps}[$n1];
@{ $t{pps1s} } = split(/=/,$t{pps1});
for $n2 ( 0 .. $#{ $t{pps1s} } ) {
$t{NO}++;
$t{pps1s1} = $t{pps1s}[$n2];
$t{list}{$t{tts1}}{$t{pps1s1}} = $t{pps2}[$t{NO}-1];
}
}
}
# enq1
@{ $t{prices} } = ();
($t{type1id},$t{partsid}) = $self->dbh->selectrow_array("SELECT type1id,partsid FROM enq1 WHERE id = $t{quo2_id}");
@{ $t{tts} } = split(/==/,$t{type1id});
@{ $t{pps} } = split(/==/,$t{partsid});
for $n1 ( 0 .. $#{ $t{tts} } ) {
$t{tts1} = $t{tts}[$n1];
$t{pps1} = $t{pps}[$n1];
@{ $t{pps1s} } = split(/=/,$t{pps1});
for $n2 ( 0 .. $#{ $t{pps1s} } ) {
$t{pps1s1} = $t{pps1s}[$n2];
push(@{ $t{prices} },$t{list}{$t{tts1}}{$t{pps1s1}});
}
}
$t{price0} = join("=",@{ $t{prices} });
#$t{price0} = $t{list}{"154"}{"2"};
$t{sql} = 'UPDATE quo2 set price0 = "';
$t{sql} .= $t{price0} . '" where id = ';
$t{sql} .= $t{quo2_id};
$t{DO} = $self->dbh->do($t{sql});
]]>
通過enq2->quo1找出原價
<![CDATA[
$t{sth} = $self->dbh->prepare("select id, enq1id from enq2");
$t{sth}->execute;
while (@rec = $t{sth}->fetchrow_array) {
if ( $rec[1] == $$pref{id} ) {
$t{NO} = 0;
$t{enq2_id} = $rec[0];
# 取出價格
$t{pri} = $self->dbh->selectrow_array("SELECT price FROM quo1 WHERE id = $t{enq2_id}");
@{ $t{pris} } = split(/=/,$t{pri});
($t{tt1},$t{pp1}) = $self->dbh->selectrow_array("SELECT type1id,partsid FROM enq2 WHERE id = $t{enq2_id}");
@{ $t{tt2} } = split(/==/,$t{tt1});
@{ $t{pp2} } = split(/==/,$t{pp1});
for $n ( 0 .. $#{ $t{tt2} } ) {
$t{tt3} = $t{tt2}[$n];
$t{pp3} = $t{pp2}[$n];
@{ $t{pp4} } = split(/=/,$t{pp3});
for $n1 (0 .. $#{ $t{pp4} } ) {
$t{NO}++;
$t{list}{$t{tt3}}{$t{pp4}[$n1]} = $t{pris}[$t{NO}-1];
}
}
}
}
$t{sth}->finish;
]]>
＞＝誤寫成＝＝的BUG(弄了一天才發現)
<![CDATA[
foreach $e (@a,@b) { $count{$e}++ };
#@union = sort {$a<=>$b} keys %count;
@union = sort keys %count;
foreach $e ( keys %count ) {
# if ($count{$e} == 2 ) { # 正好兩個的情況(不對),這個==不對
if ($count{$e} >= 2 ) { # 應該是>=
$count2{$e}++;
}
}
for $n ( 0 .. $#b ) {
next if $count2{$b[$n]};
$t{idmax}++;
push @diff, $b[$n];
$t{enq1_ids}{$b[$n]} = $t{idmax};
}
]]>
刪除重復的項目并排序
<![CDATA[
use strict;
my(%t,$n,@fld);
# 讀取main_maker1_order2.txt文件
open(IN,"main_maker1_order2.txt") or die "Can't open the file main_maker1_order2.txt.\n";
while(<IN>){
next if $. == 1;
chop;
@fld = split(/==>/);
$t{list}{$fld[1]}++;
}
close(IN);
# 讀取makers_tmp2.txt文件
open(IN,"makers_tmp2.txt") or die "Can't open the file makers_tmp2.txt.\n";
while(<IN>){
chop;
$t{list}{$_}++;
}
close(IN);
# 排序操作
@{ $t{orders} } = sort keys %{ $t{list} };
open(OUT,">makers.txt");
print OUT 'Filename=makers.txt',"\n";
$t{NO} = 0;
for $n ( 0 .. $#{ $t{orders} } ) {
$t{NO}++;
$t{N1} = sprintf("%05d",$t{NO});
$t{line} = $t{N1} . '==>' . $t{orders}[$n];
print OUT $t{line},"\n";
}
close(OUT);
__END__
###################################################################
# 把所有的小寫字母改成大寫字母并排序
open(IN,"makers_tmp.txt") or die "Can't open the file makers_tmp.txt.\n";
while(<IN>){
chop;
$t{line} = uc($_);
$t{list}{$t{line}}++; # 刪除相同的項目
}
close(IN);
# 排序操作
@{ $t{orders} } = sort keys %{ $t{list} };
open(OUT,">makers_tmp2.txt");
for $n ( 0 .. $#{ $t{orders} } ) {
print OUT $t{orders}[$n],"\n";
}
close(OUT);
###################################################################
]]>
數據庫操作的一個程序,不用了。留作存檔
<![CDATA[
# 從enq1取出主機編號(type1id),零件號碼(partsid),數量(QTY)
($t{type1id},$t{partsid},$t{QTY}) = $self->dbh->selectrow_array("SELECT type1id,partsid,QTY FROM enq1 WHERE id = $t{enq1_id}");
@loop1 = ();
$t{NO} = 0;
@{ $t{type1id_list} } = split(/==/,$t{type1id});
@{ $t{partsid_list} } = split(/==/,$t{partsid});
@{ $t{QTY_list} } = split(/==/,$t{QTY});
# Table的一行是一個項目
for $n ( 0 .. $#{ $t{type1id_list} } ) {
$t{type1id1} = $t{type1id_list}[$n];
$t{partsid1} = $t{partsid_list}[$n];
$t{QTY1} = $t{QTY_list}[$n];
# 從main_type1中取出主機名和DWG圖號
($t{id1},$t{type1},$t{DWG}) = $self->dbh->selectrow_array("select id, name,DWG from main_type1 where id = $t{type1id1}");
# 從零件名表中取出零件編號和圖紙?zhí)? @{ $t{pid_list} } = split(/=/,$t{partsid1});
@{ $t{Q_list} } = split(/=/,$t{QTY1});
@{ $t{DWGs} } = split(/=/,$t{DWG});
# 生成零件表名,根據enq1的零件編號從數據庫取出零件信息和所屬圖紙?zhí)? $t{ptable} = sprintf("%06d",$t{type1id1});
$t{ptable} = 'a' . $t{ptable};
@{ $t{dwgs1} } = ();
for $n1 ( 0 .. $#{ $t{pid_list} } ) {
$t{pid1} = $t{pid_list}[$n1];
$t{Q1} = $t{Q_list}[$n1];
@{ $t{p1} } = $self->dbh->selectrow_array("select * from $t{ptable} where id = $t{pid1}");
$t{dwg1} = $t{p1}[4];
push(@{ $t{plist}{id}{$t{dwg1}} },$t{p1}[0]);
push(@{ $t{plist}{name}{$t{dwg1}} },$t{p1}[1]);
push(@{ $t{plist}{code}{$t{dwg1}} },$t{p1}[2]);
push(@{ $t{dwgs1} },$t{dwg1});
}
# 合并重復的圖紙?zhí)?=>這個操作充分利用了Perl散列的特性
%seen = ();
@{ $t{dwgs2} } = ();
foreach $item (@{ $t{dwgs1} }) {
unless ( $seen{$item} ) {
$seen{$item} = 1;
push(@{ $t{dwgs2} },$item);
}
}
# 第一層:主機名
# 第二層:圖紙?zhí)?XXXDWG設定為不知道圖紙?zhí)?
# 第三層:零件名
# 把數據放入HTML的TABLE的TR
for $n1 ( 0 .. $#{ $t{dwgs2} } ) {
$t{dwg1} = $t{dwgs2}[$n1];
$t{DWG1} = $t{DWGs}[$t{dwg1}-1];
# 取出圖紙?zhí)? $t{line1} = '<tr bgcolor="#FFF000" align="center"><td colspan=7>';
$t{line1} .= $t{id1} . '==>' . $t{DWG1};
$t{line1} .= '</td></tr>';
my %row = (
line1 => $t{line1}
);
push(@loop1, \%row);
# 處理零件
for $n2 ( 0 .. $#{ $t{plist}{id}{$t{dwg1}} } ) {
$t{NO}++; # enq1的所有Parts的編號
$t{pid1} = $t{plist}{id}{$t{dwg1}}[$n2];
$t{name1} = $t{plist}{name}{$t{dwg1}}[$n2];
$t{code1} = $t{plist}{code}{$t{dwg1}}[$n2];
$t{line1} = '<tr bgcolor="#F0FFF0" align="center"><td>';
$t{line1} .= $t{NO} . '</td><td>';
$t{line1} .= $t{name1} . '</td><td>';
$t{line1} .= $t{code1} . '</td><td>';
$t{line1} .= $t{code1} . '</td><td>';
$t{line1} .= $t{code1} . '</td><td>';
$t{line1} .= $t{code1} . '</td><td>';
$t{line1} .= $t{code1};
$t{line1} .= '</td></tr>';
my %row = (
line1 => $t{line1}
);
push(@loop1, \%row);
}
# 必須置零,因為下一臺主機的DWG極有可能同名!
$t{plist}{id}{$t{dwg1}} = ();
$t{plist}{name}{$t{dwg1}} = ();
$t{plist}{code}{$t{dwg1}} = ();
}
}
]]>
返回
深泽县|
叙永县|
开封县|
西峡县|
香河县|
彝良县|
富宁县|
弥勒县|
安西县|
洛阳市|
调兵山市|
栖霞市|
子长县|
桐梓县|
宁南县|
沁阳市|
佛山市|
荣成市|
涞水县|
宝兴县|
永修县|
迁安市|
贵溪市|
五华县|
荃湾区|
安乡县|
漳州市|
阿坝|
吴川市|
筠连县|
吕梁市|
上栗县|
项城市|
潼关县|
延庆县|
天津市|
金阳县|
易门县|
濮阳市|
丰县|
威海市|