| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| 2SP 68 to 2SP 71-1973 | 鋁和鋁合金100度精密埋頭鉚釘規范 | Specification for 100 countersunk precision head aluminium and aluminium alloy rivets |
| BS 1133-21-1991 | 包裝規程.第21節:再生纖維素薄膜,塑料薄膜,鋁箔,撓性多層板和金屬化材料 | Packaging code - Regenerated cellulose film, films made of plastics, aluminium foil, flexible multilayer structures and metallized materials |
| BS 1139-1.2-1990 | 金屬腳手架.第1部分:管.第2節:鋁管規范 | Metal scaffolding - Tubes - Specification for aluminium tube |
| BS 1139-2.2-1991 | 金屬腳手架.第2部分:聯接件.第2節:管式腳手架鋼和鋁聯接件、配件和附件規范 | Metal scaffolding - Couplers - Specification for steel and aluminium couplers, fittings and accessories for use in tubular scaffolding |
| BS 1161-1977 | 結構用鋁合金型材規范 | Specification for aluminium alloy sections for structural purposes |
| BS 1202-3-1974 | 釘子規范.第3部分:鋁釘 | Specification for nails - Aluminium nails |
| BS 1473-1972 | 一般工程用可鍛鋁和鋁合金規范.鉚釘、螺栓和螺釘坯料 | Specification for wrought aluminium and aluminium alloys for general engineering purposes - rivet, bolt and screw stock |
| BS 1683-1987 | 已加工乳酪包裝用鋁箔規范 | Specification for coated aluminium foil for wrapping processed cheese |
| BS 1728-1-1951 | 鋁與鋁合金的分析方法.第1部分:銅的測定 | Methods for the analysis of aluminium and aluminium alloys - Determination of copper |
| BS 1728-10-1957 | 鋁與鋁合金的分析方法.第10部分:錳的測定(吸收測量法) | Methods for the analysis of aluminium and aluminium alloys - Determination of manganese (absorptiometric method) |
| BS 1728-11-1960 | 鋁與鋁合金的分析方法.第11部分:硅的測定(過氯酸法) | Methods for the analysis of aluminium and aluminium alloys - Determination of silicon (perchloric acid method) |
| BS 1728-12-1961 | 鋁與鋁合金的分析方法.第12部分:硅的測定(鉬藍吸收測定法) | Methods for the analysis of aluminium and aluminium alloys - Determination of silicon (absorptiometric molybdenum blue method) |
| BS 1728-14-1965 | 鋁與鋁合金的分析方法.第14部分:鎳的測定(重量法) | Methods for the analysis of aluminium and aluminium alloys - Determination of nickel (gravimetric method) |
| BS 1728-15-1966 | 鋁與鋁合金的分析方法.第15部分:鎳的測定(光度測量法) | Methods for the analysis of aluminium and aluminium alloys - Determination of nickel (photometric method) |
| BS 1728-16-1968 | 鋁與鋁合金的分析方法.第16部分:鉻的測定(光度測量法) | Methods for the analysis of aluminium and aluminium alloys - Determination of chromium (photometric method) |
| BS 1728-17-1968 | 鋁與鋁合金的分析方法.第17部分:鉻的測定(容量法) | Methods for the analysis of aluminium and aluminium alloys - Determination of chromium (volumetric method) |
| BS 1728-18-1970 | 鋁與鋁合金的分析方法.第18部分:鋅的測定(EDTA離子交換容量法或極譜法) | Methods for the analysis of aluminium and aluminium alloys - Determination of zinc (ion-exchange-volumetric EDTA or polarographic method) |
| BS 1728-19-1971 | 鋁與鋁合金的分析方法.鎂的測定(原子吸收法) | Methods for the analysis of aluminium and aluminium alloys - Determination of magnesium (atomic absorption method) |
| BS 1728-1971 | 鋁與鋁合金的分析方法.第19部分:鎂的測定(原子吸收法) | Methods for the analysis of aluminium and aluminium alloys. Determination of magnesium (atomic absorption method) |
| BS 1728-20-1971 | 鋁與鋁合金的分析方法.第20部分:鉛的測定(原子吸收法) | Methods for the analysis of aluminium and aluminium alloys - Determination of lead (atomic absorption method) |
| BS 1728-21-1973 | 鋁與鋁合金的分析方法.第21部分:鋅(原子吸收法) | Methods for the analysis of aluminium and aluminium alloys - Zinc (atomic absorption method) |
| BS 1728-22-1972 | 鋁與鋁合金的分析方法.第22部分:鎂的測定(CDTA容量法) | Methods for the analysis of aluminium and aluminium alloys - Determination of magnesium (volumetric CDTA method) |
| BS 1728-23-1976 | 鋁與鋁合金的分析方法.第23部分:銅(原子吸收法) | Methods for the analysis of aluminium and aluminium alloys - Copper (atomic absorption method) |
| BS 1728-24-1976 | 鋁與鋁合金的分析方法.第24部分:鎳(原子吸收法) | Methods for the analysis of aluminium and aluminium alloys - Nickel (atomic absorption method) |
| BS 1728-25-1980 | 鋁與鋁合金的分析方法.第25部分:鈦(變色酸分光光度法) | Methods for the analysis of aluminium and aluminium alloys - Titanium (spectrophotometric chromotropic acid method) |
| BS 1728-5-1953 | 鋁與鋁合金的分析方法.第5部分:銅的測定(吸收測量法) | Methods for the analysis of aluminium and aluminium alloys - Determination of copper (absorptiometric method) |
| BS 1728-6-1955 | 鋁與鋁合金的分析方法.第6部分:鐵的測定(容量分析:氯化亞鈦法) | Methods for the analysis of aluminium and aluminium alloys - Determination of iron (volumetric: titanous chloride method) |
| BS 1728-8-1957 | 鋁與鋁合金的分析方法.第8部分:鐵的測定(1:10菲咯啉吸收測量法) | Methods for the analysis of aluminium and aluminium alloys - Determination of iron (absorptiometric 1:10-phenanthroline method) |
| BS 1728-9-1957 | 鋁與鋁合金的分析方法.第9部分:錳的測定(容量分析:亞砷酸鹽/亞硝酸鹽法) | Methods for the analysis of aluminium and aluminium alloys - Determination of manganese (volumetric: arsenite/nitrite method) |
| BS 1748 Pts.1-5-1961 | 銅合金分析方法.第1部分至第5部分:銅合金中銅、鉛、鐵、鋁和鎳的測定方法 | Methods for the analysis of copper alloys - Methods for the determination of copper, lead, iron, aluminium and nickel in copper alloys |
| BS 1902-9.1-1987 | 耐火材料試驗方法.第9部分:化學分析儀法.第1節:硅酸鋁耐火材料X射線熒光分析法 | Methods of testing refractory materials - Chemical analysis by instrumental methods - Analysis of alumino-silicate refractories by X-ray fluorescence |
| BS 1974-1953 | 鋁合金大鉚釘(標稱直徑1/2英寸至1英寸)規范 | Specification for large aluminium alloy rivets (1/2 in. to 1 in. nominal diameters) |
| BS 2000-377-1995 | 石油及石油產品試驗方法.第377部分:石油產品.燃料油中鋁和硅的含量測定.電感耦合等離子體發散和原子吸收光 | Methods of test for petroleum and its products - Petroleum products - Determination of aluminium and silicon in fuel oils - Inductively coupled plasma emission and atomic absorption spectroscopy methods |
| BS 2037-1994 | 便攜式鋁制梯子、踏板、棧橋和輕型工作架規范 | Specification for portable aluminium ladders, steps, trestles and lightweight stagings |
| BS 215-1-1970 | 架空電力傳輸用鋁線和鋼芯鋁線規范.第1部分:鋁絞股導線 | Specification for aluminium conductors and aluminium conductors, steel-reinforced for overhead power transmission - Aluminium stranded conductors |
| BS 215-2-1970 | 架空電力傳輸用鋁線和鋼芯鋁線規范.第2部分:鋼芯鋁線 | Specification for aluminium conductors and aluminium conductors, steel-reinforced for overhead power transmission - Aluminium conductors, steel-reinforced |
| BS 2627-1970 | 電工用鍛鋁規范.線材 | Specification for wrought aluminium for electrical purposes - Wire |
| BS 2649-3-1988 | 玻璃分析方法.第3部分:氧化鉀一氧化鋁-硅石類玻璃 | Methods for analysis of glass - Glasses of the potassium oxide-lead oxide-silica type |
| BS 2897-1970 | 電氣用鍛鋁.帶拉拔或軋制邊的帶材 | Specification for wrought aluminium for electrical purposes - Strip with drawn or rolled edges |
| BS 2A 175-1962 | 飛行器用100°埋頭鋁合金螺栓(統一螺紋)規范 | Specification for 100 ° countersunk head aluminium alloy bolts (Unified threads) for aircraft |
| BS 2A 29-1962 | 飛行器用鋁合金六角螺母(B.A和B.S.F螺紋)(普通和開槽的)規范 | Specification for aluminium alloy hexagonal nuts (B.A and B.S.F. threads) (ordinary and slotted) for aircraft |
| BS 2A 61-1962 | 飛行器用鋁合金制六角頭螺栓(B.A和B.S.F螺紋)規范 | Specification for aluminium alloy hexagonal headed bolts (B.A. and B.S.F. threads) for aircraft |
| BS 2B 27-2002 | 銅鋅鋁鎳硅合金管材 | Copper-zinc-aluminium-nickel-silicon alloy tube |
| BS 2G 215-1-1985 | 飛機鎳-鉻和鎳-鋁熱電偶延伸電纜.第1部分:導線規范 | Nickel-chromium and nickel-aluminium thermocouple extension cables for aircraft - Specification for conductors |
| BS 2G 215-2-1989 | 飛機鎳-鉻和鎳-鋁熱電偶延伸電纜.第2部分:終端規范 | Nickel-chromium and nickel-aluminium thermocouple extension cables for aircraft - Specification for terminations |
| BS 2HC 203-1989 | 鎳-鉻-鋁-鉬-鈮合金鑄件規范(鎳基鉻13.0、鋁6.0、鉬4.5、鈮2.3) | Specification for nickel-chromium-aluminium-molybdenum-niobium alloy castings (Nickel base Cr 13.0, Al 6.0, Mo 4.5, Nb 2.3) |
| BS 2HC 204-1989 | 鎳-鈷-鉻-鋁-鈦-鉬合金鑄件規范(鎳基鈷15.0、鉻10.0、鋁5.5、鈦4.8、鉬3.0) | Specification for nickel-cobalt-chromium-aluminium-titanium-molybdenum alloy castings (Nickel base Co 15.0, Cr 10.0, Al 5.5, Ti 4.8, Mo 3.0) |
| BS 2HC 207-1989 | 鎳-鈷-鎢-鉻-鋁-鉭-鉿-鈦合金鑄件規范(鎳基鈷10.0、鎢10.0、鉻9.0、鋁5.5、鉭25、鉿1.5、鈦1.5) | Specification for nickel-cobalt-tungsten-chromium-aluminium-tantalum-hafnium-titanium alloy castings (Nickel base Co 10.0, W 10.0, Cr 9.0, Al 5.5, Ta 2.5, Hf 1.5, Ti 1.5) |
| BS 2HC 208-1989 | 鎳-鈷-鎢-鉻-鋁-鉬-鈦-鉭合金鑄件規范(鎳基Co 10.0、W 10.0、Cr 9.0、Al 5.5、Mo 2.5、Ti 1.5、Ta 1.5) | Specification for nickel-cobalt-tungsten-chromium-aluminium-molybdenum-titanium-tantal um alloy castings (nickel base Co 10.0, W 10.0, Cr 9.0, Al 5.5, Mo 2.5, Ti 1.5, Ta 1.5) |
| BS 2HC 209-1989 | 低碳、沉淀硬化鎳-鉻-鋁-鉬-鈮合金鑄件規范(鎳基鉻11.5、鋁6.0、鉬4.0、鈮2.0) | Specification for low carbon, precipitation hardening nickel-chromium-aluminium-molybdenum-niobium alloy castings (Nickel base Cr 11.5, Al 6.0, Mo 4.0, Nb 2.0) |
| BS 2HC 210-1989 | 鎳-鎢-鋁-鉻-鉬合金鑄件規范(鎳基鎢10.5、鋁6.0、鉻6.0、鉬2.0) | Specification for nickel-tungsten-aluminium-chromium-molybdenum alloy castings (Nickel base W 10.5, Al 6.0, Cr 6.0, Mo 2.0) |
| BS 2HC 211-1989 | 鎳-鉻-鈷-鉬-鋁鈦合金鑄件規范(鎳基鉻15.5、鈷10.0、鉬8.3、鋁4.2、鈦3.6) | Specification for nickel-chromium-cobalt-molybdenum-aluminium-titanium alloy castings (Nickel base Cr 15.5, Co 10.0, Mo 8,3, Al 4.2, Ti 3.6) |
| BS 2HR 1-1973 | 鎳-鉻-鈦鋁耐熱合金坯錠、棒材、鍛件和部件(鎳基、Cr 19.5、Ti 2.2、Al 1.4)規范 | Specification for nickel-chromium-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 2.2, Al 1.4) |
| BS 2HR 2-1973 | 鎳-鉻-鈦-鋁耐熱合金坯錠、棒材、鍛件和部件(鎳基、Cr 19.5、Co18.0、Ti25、Al 1.5)規范 | Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
| BS 2HR 201-1974 | 鎳-鉻-鈦-鋁耐熱合金板材、薄板材和帶材(鎳基、Cr19.5、Ti2.2、Al1.4)規范 | Specification for nickel-chromium-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Cr 19.5, Ti 2.2, Al 1.4) |
| BS 2HR 401-1973 | 冷加工和軟化的無縫鎳鉻鈦鋁耐熱合金管(鎳基、Cr 19.5、Ti 2.2、Al 1.4)規范 | Specification for nickel-chromium-titanium-aluminium heat-resisting alloy cold worked and softened seamless tubes (nickel base, Cr 19.5, Ti 2.2, Al 1.4) |
| BS 2HR 501-1973 | 彈簧用冷拉固溶熱處理的鎳鉻鈷鈦鋁耐熱合金線材(鎳基、Cr19.5、Co18.0、Ti2.5、Al 1.5)規范 | Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn wire for springs (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
| BS 2HR 502-1973 | 彈簧用冷拉和固溶熱處理的鎳鉻鈷鈦鋁耐熱合金線材(鎳基、Cr19.5、Co18.0、Ti2.5、Al 1.5)規范 | Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn and solution heat treated wire for springs (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
| BS 2HR 503-1973 | 螺紋墊圈(直徑0.45mm-2mm)用鎳鉻鈷鈦鋁耐熱合金線材(鎳基、Cr19.5、Co18.0、Ti2.5、Al 1.5)規范 | Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire for thread inserts (0.45 mm to 2 mm diameter) (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
| BS 2L 169-2002 | 鋁-硅-鎂合金(Si 7、Mg 0.6)(溶解處理和人工老化的)鑄錠和鑄件 | Ingots (as cast) and castings (solution treated and artificially aged) of aluminium-silicon-magnesium alloy (Si 7, Mg 0. 6) |
| BS 2L 503-1973 | 鎂-鋁(6)-鋅(1.0)合金管規范 | Specification for tube of magnesium-6% aluminium-zinc alloy (Al 6.0, Zn 1.0) |
| BS 2L 77-1971 | 鋁-銅(4.4)-鎂(0.5)-硅(0.7)-錳(0.8)合金鍛坯和鍛件的規范(溶解和沉淀處理) | Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) |
| BS 2L 83-1971 | 鋁-銅(2)-鎳(1)-鎂(1)-鐵(0.9)-硅(0.9)合金鍛坯、棒材、擠壓型材和鍛件規范(溶解處理和沉淀處理) | Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-nickel-magnesium-iron-silicon alloy (solution treated and precipitation treated) (Cu 2, Ni 1, Mg 1, Si 0.9, Fe 0.9) |
| BS 2L 85-1971 | 鋁-銅(1.5)-硅(1)和鎂(0.8)合金鍛坯、棒材、擠壓型材和鍛件規范(溶解處理和沉淀處理) | Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-silicon-magnesium alloy (solution treated and precipitation treated) (Cu 1.5, Si 1, Mg 0.8) |
| BS 2L 87-1971 | 用于制造螺母、聯軸節和機加工中空零部件的鋁-銅(4.4)-鎂(0.5)-硅(0.7)-錳(0.8)合金六角棒材規范(固溶處理 | Specification for hexagonal bars for nuts, couplings and hollow machined parts of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (free from peripheral and asymmetric coarse grain) (not less than 14 mm nor more than 36 mm across flats) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) |
| BS 2L 93-1971 | 鋁-銅-鎂-硅-錳合金板規范(溶解處理、受控拉伸和沉淀處理)(Cu 4.4、Mg 0.5、Si 0.7、Mn 0.8) | Specification for plate of aluminium-copper-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) |
| BS 2L 95-1971 | 鋁-鋅(5.8)-鎂(2.5)-銅(1.6)-鉻(0.15)合金板規范(溶解處理、控制拉伸和沉淀處理) | Specification for plate of aluminium-zinc-magnesium-copper-chromium alloy (solution treated, controlled stretched and precipitation treated) (Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.15) |
| BS 2L 97-1971 | 鋁-銅(4.4)-鎂(1.5)-錳(0.6)合金中厚板材規范(固溶處理,室溫時效:控制拉伸) | Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated, controlled stretched and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6) |
| BS 2L 98-1971 | 鋁-銅(4.4)-鎂(1.5)-錳(0.6)合金板規范(溶解處理、室溫時效:不控制拉伸的) | Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature: not controlled stretched) (Cu 4.4, Mg 1.5, Mn 0.6) |
| BS 2L 99-1972 | 鋁-硅(7)-鎂(0.3)合金鑄錠和鑄件規范(固溶處理和沉淀處理) | Specification for ingots and castings of aluminium-silicon-magnesium alloy (solution treated and precipitation treated) (Si 7, Mg 0.3) |
| BS 2SP 148-150-1979 | 鋁合金統一墊圈規范 | Specification for Unified aluminium alloy washers |
| BS 2SP 77 to 2SP 80-1973 | 圓頭形鋁和鋁合金鉚釘規范 | Specification for snap head aluminium and aluminium alloy rivets |
| BS 2SP 83 to 85-1973 | 菌形頭鋁合金鉚釘規范 | Specification for mushroom head aluminium alloy rivets |
| BS 2TA 10-1974 | 鈦鋁釩合金薄板材規范(抗拉強度960-1270MPa) | Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 960-1270 MPa) |
| BS 2TA 11-1974 | 機加工用鈦鋁釩合金棒材和型材規范(抗拉強度900-1160MPa)(限定等圓斷面150mm) | Specification for bar and section for machining of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm) |
| BS 2TA 12-1974 | 鈦鋁釩合金鍛坯規范(抗拉強度900-1160MPa)(限定等圓斷面150mm) | Specification for forging stock of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm) |
| BS 2TA 13-1974 | 鈦鋁釩合金鍛件規范(抗拉強度900-1160MPa)(限定等圓斷面150mm) | Specification for forgings of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm) |
| BS 2TA 28-1974 | 鈦鋁釩合金鍛坯和線材規范(抗拉強度1100-1300MPa)(限定等圓斷面20mm)(主要供加工符合英國標準A系列要求的緊 | Specification for forging stock and wire of titanium-aluminium-vanadium alloy (tensile strength 1100-1300 MPa) (limiting ruling section 20 mm) (primarily intended for the manufacture of fasteners complying with the requirements of the 'A' series of British Standards) |
| BS 3083-1988 | 普通熱浸涂鋅和熱浸涂鋁/鋅波紋薄鋼板規范 | Specification for hot-dip zinc coated and hot-dip aluminium/zinc coated corrugated steel sheets for general purposes |
| BS 3313-1-1968 | 奶制品容器用包覆鋁箔和鋁帶規范.第1部分:玻璃容器用包覆鋁箔 | Specification for aluminium capping foil and strip for dairy product containers - Aluminium capping foil for glass containers |
| BS 3338-18-1966 | 錫及錫合金取樣及分析方法.第18部分:焊料及軸承用白合金中鋁含量測定方法(光度測定法) | Methods for the sampling and analysis of tin and tin alloys - Method for the determination of aluminium in solders and white metal bearing alloys (photometric method) |
| BS 3338-2-1961 | 錫及錫合金取樣及分析方法.第2部分:錫錠中錫含量測定方法(鋁還原法) | Methods for the sampling and analysis of tin and tin alloys - Method for the determination of tin in ingot tin (aluminium reduction method) |
| BS 3727-1-1966 | 電子管和電子閥用鎳的分析方法.第1部分:鋁含量測定(光度測量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of aluminium (photometric method) |
| BS 388-1972 | 鋁顏料規范 | Specification for aluminium pigments |
| BS 3907-1-1965 | 鎂和鎂合金分析方法.第1部分:鎂合金中鋁含量測定(重量法) | Methods for the analysis of magnesium and magnesium alloys - Determination of aluminium in magnesium alloys (gravimetric method) |
| BS 3907-12-1971 | 鎂和鎂合金分析方法.第12部分:鋁含量測定(光度測量法) | Methods for the analysis of magnesium and magnesium alloys - Determination of aluminium in magnesium and magnesium alloys (photometric method) |
| BS 3987-1991 | 建筑物外部裝飾用鍛鋁的陽極氧化物覆層規范 | Specification for anodic oxidation coatings on wrought aluminium for external architectural applications |
| BS 3988-1970 | 電氣用鍛鋁規范.絕緣電纜用實芯導線 | Specification for wrought aluminium for electrical purposes - Solid conductors for insulated cables |
| BS 3A 107-1962 | 飛行器用鋁合金螺母(統一六角形和統一螺紋)(普通和開槽的)規范 | Specification for aluminium alloy nuts (Unified hexagons and Unified threads) (ordinary and slotted) for aircraft |
| BS 3A 171-1962 | 飛行器鋁合金盤頭螺栓(統一螺紋)規范 | Specification for aluminium alloy pan head bolts (Unified threads) for aircraft |
| BS 3HR 601-1989 | 緊固件制造用(最大直徑或小截面尺寸為30mm)鎳-鉻-鈦-鋁耐熱合金棒材和線材(鎳基鉻19.5、鈦2.2、鋁1.4)規范 | Specification for nickel-chromium-titanium-aluminium heat-resisting alloy bar and wire for the manufacture of fasteners (maximum diameter or minor sectional dimension 30 mm) (nickel base Cr 19.5, Ti 2.2, Al 1.4) |
| BS 3L 122-1970 | 鎂-鋁(8)-鋅(0.5)-錳(0.3)合金鑄錠和鑄件規范(固溶處理) | Specification for ingots and castings of magnesium-8% aluminium-zinc-manganese alloy (solution treated) (Al 8, Zn 0.5, Mn 0.3) |
| BS 3L 124-1970 | 鎂-鋁(10)-鋅(0.5)-錳(0.3)合金鑄錠和鑄件規范(溶液處理) | Specification for ingots and castings of magnesium - 10% aluminium-zinc-manganese alloy (solution treated) (Al 10, Zn 0.5, Mn 0.3) |
| BS 3L 125-1970 | 鎂-鋁(10)-鋅(0.5)-錳(0.3)合金鑄錠和鑄件規范(溶液處理和沉淀處理) | Specification for ingots and castings of magnesium - 10% aluminium-zinc-manganese alloy (solution treated and precipitation treated) (Al 10, Zn 0.5, Mn 0.3) |
| BS 3L 51-1970 | 鋁-硅(2.5)-銅(1.2)-鎳(1.0)-鎂(0.1)-鐵(1.0)合金鑄錠和鑄件規范(沉淀熱處理) | Specification for ingots and castings of aluminium-silicon-copper-iron-nickel-magnesium alloy (precipitation treated) (Si 2.5, Cu 1.2, Fe 1, Ni 1, Mg 0.1) |
| BS 3L 63-1971 | 鋁-銅-(4.4)-鎂(0.5)-硅(0.7)-錳(0.8)合金管規范(溶解和沉淀處理) | Specification for tube of aluminium-copper-mangesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) |
| BS 3L 78-1970 | 鋁-硅(5)-銅(1.2)-鎂(0.5)合金鑄錠和鑄件規范(固溶處理和熱處理) | Specification for ingots and castings of aluminium-silicon-copper-magnesium alloy (solution treated and precipitation treated) (Si 5, Cu 1.2, Mg 0.5) |
| BS 3L 80-1985 | 鋁-鎂2.25%合金板材和帶材規范(強度符號-0) | Specification for sheet and strip of aluminium-21/4% magnesium alloy (temper designation-O) |
| BS 3L 81-1985 | 鋁-鎂2.25%合金板材和帶材規范(強度符號-H16或H26) | Specification for sheet and strip of aluminium-21/4% magnesium alloy (temper designation H16 or H26) |
| BS 3L 86-1971 | 鋁-銅(2.5)-鎂(0.3)合金冷鍛實心鉚釘用鋼絲規范(直徑不超過10mm) | Specification for wire for solid, cold-forged rivets of aluminium-copper-magnesium alloy (not exceeding 10 mm diameter) (Cu 2.5, Mg 0.3) |
| BS 4140-0-1986 | 氧化鋁試驗方法.總則 | Methods of test for aluminium oxide - General introduction |
| BS 4140-1-1986 | 氧化鋁試驗方法.第1部分:試樣制備和貯存 | Methods of test for aluminium oxide - Preparation and storage of test samples |
| BS 4140-10-1986 | 氧化鋁的試驗方法.未夯實密度的測定 | Methods of test for aluminium oxide - Determination of untamped density |
| BS 4140-11-1986 | 氧化鋁試驗方法.第11部分:鈉含量測定 | Methods of test for aluminium oxide - Determination of sodium content |
| BS 4140-12-1986 | 氧化鋁試驗方法.第12部分:釩含量測定 | Methods of test for aluminium oxide - Determination of vanadium content |
| BS 4140-13-1986 | 氧化鋁試驗方法.第13部分:試樣溶液鹽酸加壓處理制備方法 | Methods of test for aluminium oxide - Preparation of sample solution by treatment with hydrochloric acid under pressure |
| BS 4140-14-1997 | 氧化鋁試驗方法.第14部分:鈣含量測定 | Methods of test for aluminium oxide - Determination of calcium content |
| BS 4140-16-1986 | 氧化鋁試驗方法.第16部分:用火焰原子吸收法測定鋅含量 | Methods of test for aluminium oxide - Determination of zinc content by flame atomic absorption |
| BS 4140-17-1986 | 氧化鋁試驗方法.第17部分:氟含量測定 | Methods of test for aluminium oxide - Determination of fluorine content |
| BS 4140-18-1986 | 氧化鋁試驗方法.第18部分:磷含量測定 | Methods of test for aluminium oxide - Determination of phosphorus content |
| BS 4140-19-1986 | 氧化鋁的試驗方法.硼含量的測定 | Methods of test for aluminium oxide - Determination of boron content |
| BS 4140-1986 | 氧化鋁的試驗方法.第19部分:硼含量的測定 | Methods of test for aluminium oxide. Determination of boron content |
| BS 4140-20-1980 | 氧化鋁試驗方法.第20部分:取樣 | Methods of test for aluminium oxide - Sampling |
| BS 4140-22-1980 | 氧化鋁試驗方法.第22部分:錳含量的測定 | Methods of test for aluminium oxide - Determination of manganese content |
| BS 4140-24-1987 | 氧化鋁試驗方法.第24部分:粒度分布測定(電鑄篩分法) | Methods of test for aluminium oxide - Determination of fine particle size distribution (method using electroformed sieves) |
| BS 4140-4-1986 | 氧化鋁試驗方法.第4部分:試樣溶液加堿熔化制備 | Methods of test for aluminium oxide - Preparation of sample solution by alkaline fusion |
| BS 4140-5-1986 | 氧化鋁試驗方法.第5部分:二氧化硅含量測定 | Methods of test for aluminium oxide - Determination of silica content |
| BS 4140-6-1980 | 氧化鋁試驗方法.第6部分:鈦含量測定 | Methods of test for aluminium oxide - Determination of titanium content |
| BS 4140-7-1986 | 氧化鋁試驗方法.第7部分:鐵含量測定 | Methods of test for aluminium oxide - Determination of iron content |
| BS 4140-8-1986 | 氧化鋁的試驗方法.用比重瓶計測定絕對密度 | Methods of test for aluminium oxide - Determination of absolute density using a pyknometer |
| BS 4140-9-1986 | 氧化鋁的試驗方法.休止角的測量 | Methods of test for aluminium oxide - Measurement of the angle of repose |
| BS 4300/10-1969 | 普通工程用鍛造鋁和鋁合金規范(補充系列).第10部分:5454型冷拔管 | Wrought aluminium and aluminium alloys for general engineering purposes (supplementary series) - 5454 Drawn tube |
| BS 4756-1998 | 木器用鋁粉調合底漆規范 | Specification for ready-mixed aluminium priming paints for woodwork |
| BS 4842-1984 | 凃用于外部建筑的鋁合金擠壓件、薄板材和預成型件上的液態有機涂層和液態有機涂層的規范 | Specification for liquid organic coatings for application to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with liquid organic coatings |
| BS 4868-1972 | 建筑用成型薄鋁板規范 | Specification for profiled aluminium sheet for building |
| BS 4872-2-1976 | 不要求批準焊接工藝時焊工的鑒定考試規范.第2部分:鋁及鋁合金鎢極惰性氣體保護電弧焊或熔化極惰性氣體保護 | Specification for approval testing of welders when welding procedure approval is not required - TIG or MIG welding of aluminium and its alloys |
| BS 4993-1-1974 | 工業用氟化鋁試驗方法.第1部分:氟含量測定 | Methods of test for aluminium fluoride for industrial use - Determination of fluorine content |
| BS 4993-10-1983 | 工業用氟化鋁試驗方法.第10部分:磷含量測定 | Methods of test for aluminium fluoride for industrial use - Determination of phosphorus content |
| BS 4993-2-1974 | 工業用氟化鋁試驗方法.第2部分:鐵含量測定 | Methods of test for aluminium fluoride for industrial use - Determination of iron content |
| BS 4993-3-1974 | 工業用氟化鋁試驗方法.第3部分:硅含量測定 | Methods of test for aluminium fluoride for industrial use - Determination of silica content |
| BS 4993-4-1980 | 工業用氟化鋁試驗方法.第4部分:試樣制備和貯存 | Methods of test for aluminium fluoride for industrial use - Preparation and storage of test samples |
| BS 4993-5-1980 | 工業用氟化鋁試驗方法.第5部分:含水量測定(卡爾費希爾法) | Methods of test for aluminium fluoride for industrial use - Determination of moisture content (Karl Fischer method) |
| BS 4993-6-1980 | 工業用氟化鋁試驗方法.第6部分:含水量測定(稱重法) | Methods of test for aluminium fluoride for industrial use - Determination of moisture content (gravimetric method) |
| BS 4993-7-1980 | 工業用氟化鋁試驗方法.第7部分:鈉含量測定 | Methods of test for aluminium fluoride for industrial use - Determination of sodium content |
| BS 4993-8-1980 | 工業用氟化鋁試驗方法.第8部分:硫酸鹽含量測定 | Methods of test for aluminium fluoride for industrial use - Determination of sulphate content |
| BS 4993-9-1980 | 工業用氟化鋁試驗方法.第9部分:硫含量測定(x射線熒光光譜法) | Methods of test for aluminium fluoride for industrial use - Determination of sulphur content (X-ray fluorescence spectrometric method) |
| BS 4A 169-2002 | 飛行器用鋁合金螺栓(統一六角形和統一螺紋) | Specification for aluminium alloy bolts (Unified hexagons and Unified threads) for aircraft |
| BS 4A 170-1999 | 鋁合金蘑菇頭開槽螺栓(統一螺紋)規范 | Specification for aluminium alloy, mushroom-headed, slotted drive, bolts (unified thread) |
| BS 4L 100-1993 | 鍛鋁和鋁合金的檢驗、試驗和驗收程序 | Procedure for inspection, testing and acceptance of wrought aluminium and aluminium alloys |
| BS 4L 101-1990 | 鋁基和鎂基鑄錠和鑄件的檢驗、試驗和驗收程序 | Procedure for inspection, testing and acceptance of aluminium-base and magnesium-base ingots and castings |
| BS 4L 54-1986 | 99%鋁管規范(冷拔:無縫:液壓試驗)(壁厚不超過12mm) | Specification for tube of 99% aluminium (cold drawn: seamless: tested hydraulically) (not exceeding 12 mm wall thickness) |
| BS 4L 56-1986 | 鋁-2<1/4>%鎂合金管規范(強度符號-O)(無縫管:液壓試驗)(壁厚不超過12mm) | Specification for tube of aluminium-21/4% magnesium alloy (temper designation-O) (seamless: tested hydraulically) (not exceeding 12 mm wall thickness) |
| BS 4L 59-1985 | 鋁-鎂合金板材和帶材規范(強度符號-H16或H2) | Specification for sheet and strip of aluminium-manganese alloy (temper designation H16 or H26) |
| BS 4L 60-1985 | 鋁-鎂合金板材和帶材規范(強度符號-H12或H22) | Specification for sheet and strip of aluminium-manganese alloy (temper designation H12 or H22) |
| BS 4L 61-1985 | 鋁-鎂合金板材和帶材規范(強度符號-0) | Specification for sheet and strip of aluminium-manganese alloy (temper designation-O) |
| BS 5045-8-2000 | 可運輸?shù)臍馄?特殊便攜的在15℃時最高達300巴充氣壓力的水容量為0.5L-15L的無縫鋁合金氣瓶規范 | Transportable gas containers - Specification for seamless aluminium alloy gas containers of water capacity 0.5 L up to 15 L and up to 300 bar charged pressure at 15 °C for special portable application |
| BS 5117-2.6-1992 | 發動機濃縮冷卻劑(防凍劑)腐蝕抑制試驗.第2部分:防腐蝕性能試驗方法.第6節:熱傳導條件下鑄鋁合金防腐蝕試驗 | Testing corrosion inhibiting, engine coolant concentrate ('antifreeze') - Methods of test for corrosion inhibition performance - Test for corrosion of cast aluminium alloys under heat-transfer conditions |
| BS 5372-1997 | 額定電壓為600/1000V和1900/3700V的銅或鋁導體多芯擠制固體電介質絕緣電纜終端的尺寸規范 | Specification for dimensions of cable terminations for multi-core extruded solid dielectric insulated distribution cables of rated voltages 600/1000 V and 1900/3300 V having copper or aluminium conductors |
| BS 5599-1993 | 工程用鋁及其合金強陽極氧化涂層規范 | Specification for hard anodic oxidation coatings on aluminium and its alloys for engineering purposes |
| BS 5688-11-1979 | 工業用硼酸、氧化硼、四硼酸二鈉、高硼酸鈉與粗硼酸鈉的試驗方法.粗硼酸鈉中鋁總含量的測定 | Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use - Determination of total aluminium content of crude sodium borates |
| BS 5688-20-1979 | 工業用硼酸、氧化硼、四硼酸二鈉、高硼酸鈉與粗硼酸鈉的試驗方法.粗硼酸鈉可溶于堿性介質的鋁含量測定 | Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use - Determination of aluminium soluble in alkaline medium in crude sodium borates |
| BS 5812-1-1979 | 滑動軸承材料.第1部分:整體軸承用鋁合金規范 | Materials for plain bearings - Specification for aluminium alloy for solid bearings |
| BS 5L 34-1985 | 99%鋁鍛坯、棒材、擠壓型材和鍛件規范 | Specification for forging stock, bars, extruded sections and forgings of 99% aluminium |
| BS 5L 36-1985 | 99.5%整體冷鍛鉚釘用鋁絲規范(直徑不超過10mm) | Specification for wire for solid, cold-forged rivets of 99.5% aluminium (not exceeding 10 mm diameter) |
| BS 5L 44-1985 | 鋁-鎂2(1/4)合金鍛坯、棒材、擠壓型材和鍛件規范 | Specification for forging stock, bars, extruded sections and forgings of aluminium-21/4% magnesium alloy |
| BS 6043-1.1-2002 | 制鋁工業用碳素材料的取樣與試驗方法.電極用瀝青.取樣.第1.1節:取樣 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Sampling - Section 1.1: Sampling |
| BS 6043-1.10-2000 | 制鋁工業用碳素材料的取樣與試驗方法.電極用瀝青.揮發物含量的測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of volatile matter content - Section 1.10 Determination of volatile matter content |
| BS 6043-1.11-2000 | 制鋁工業用含碳材料的取樣和試驗方法.喹啉不溶物中C/H原子比的測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Determination of the atomic C/H ratio of the quinoline-insoluble material |
| BS 6043-1.12-1994 | 制鋁工業用炭素材料取樣與試驗方法.第1部分:電極硬柏油脂.第12節:介晶相含量測定 | Method of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of mesophase content |
| BS 6043-1.13-2000 | 制鋁工業用含碳材料的取樣和試驗方法.電極用瀝青.硫含量的測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of sulfur content |
| BS 6043-1.2-1981 | 制鋁工業用炭素材料取樣與試驗方法.第1部分:電極硬柏油脂.第2節:水分測定(迪安 斯達克法) | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of water content (Dean and Stark method) |
| BS 6043-1.3-1983 | 制鋁工業用炭素材料取樣與試驗方法.第1部分:電極硬柏油脂.第3節:軟化點測定(環、球法) | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of softening point (ring and ball method) |
| BS 6043-1.4-1981 | 制鋁工業用炭素材料取樣與試驗方法.第1部分:電極硬柏油脂.第4節:甲苯不溶物質含量測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of content of toluene-insoluble material |
| BS 6043-1.5-1983 | 制鋁工業用炭素材料取樣與試驗方法.第1部分:電極硬柏油脂.第5節:喹啉不溶物質含量測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of content of quinoline-insoluble material |
| BS 6043-1.6-1998 | 制鋁工業用碳素材料的取樣與試驗方法.電極用瀝青.焦化值測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of coking value - Section 1.6 Determination of coking value |
| BS 6043-1.7-1988 | 制鋁工業用炭素材料取樣與試驗方法.第1部分:電極硬柏油脂.第7節:表觀密度測定(浮力法) | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of apparent density (buoyancy method) |
| BS 6043-1.8-1986 | 制鋁工業用炭素材料取樣與試驗方法.第1部分:電極硬柏油脂.第8節:灰分測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of ash |
| BS 6043-1.9-1989 | 制鋁工業用炭素材料取樣與試驗方法.第1部分:電極硬柏油脂.第9節:硫含量測定(氧彈法) | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode pitch - Determination of sulphur content (bomb method) |
| BS 6043-1－1.2-1981 | 鋁制品用碳素材料抽樣和試驗的英國標準方法.第1部分:電極用瀝青.第1.2節:水含量的測定(迪安一斯達克法) | British Standard Methods of sampling and test for Carbonaceous materials used in aluminium manufacter Part 1. Electrode pitch Section 1.2 Determination of water content (Dean and Stark method) |
| BS 6043-2-18-2001 | 制鋁工業用含碳材料的取樣和試驗方法.電極用焦炭.用埃斯卡法測定總硫量 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of total sulfur by the Eschka method |
| BS 6043-2.1-1985 | 制鋁工業用炭素材料取樣與試驗方法.第2部分:電極用焦炭.第1節:取樣 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Sampling |
| BS 6043-2.10-1996 | 制鋁工業用炭素材料取樣與試驗方法.第2部分:電極用焦炭.第10節:焙燒焦碳顆粒電阻率測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of electrical resistivity of calcined coke granules |
| BS 6043-2.11-1995 | 制鋁工業用炭素材料取樣與試驗方法.第2部分:電極用焦炭.第11節:揮發物含量測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of volatile matter content |
| BS 6043-2.12-1994 | 制鋁工業用炭素材料取樣與試驗方法.第2部分:電極用焦炭.第12節:碎焦粒度分布測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of particle size distribution of fine coke |
| BS 6043-2.13-1996 | 制鋁工業用炭素材料取樣與試驗方法.第2部分:電極用焦炭.第13節:未焙燒焦炭和焙燒焦炭散裝密度測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of tapped bulk density of green and calcined coke |
| BS 6043-2.15-1997 | 制鋁工業用炭素材料抽樣和試驗方法.第2部分:電極焦炭.第15節:使用實驗室震動粉碎機測定焙燒焦炭的結晶穩定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of grain stability of calcined coke using a laboratory vibration mill |
| BS 6043-2.16-1998 | 鋁制造用炭素物的抽樣和試驗方法.電極焦炭.煅燒焦碳水含量的測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of water content of calcined coke |
| BS 6043-2.20.1-2001 | 制鋁工業用碳素材料的取樣與試驗方法.電極用焦炭.煅燒焦炭的羧基反應性.通過質量損失法測定反應性 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Carboxy reactivity of calcined coke - Determination of the reactivity by a loss in mass method - Section 2.20: Carboxy reactivity of calcined coke Subsection 2.20.1: Determination of the reactivity by a loss in mass method |
| BS 6043-2.21.1-2001 | 鋁生產用碳素材料的取樣和試驗方法.電極用焦炭.煅燒焦炭的空氣反應性.通過灼燒溫度測定反應性 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Air reactivity of calcined coke - Determination of the reactivity by determination of ignition temperature - Section 2.21: Air reactivity of calcined coke Subsection 2.21.1: Determination of the reactivity by determination of ignition temperature |
| BS 6043-2.3-1997 | 制鋁工業用炭素材料取樣與試驗方法.第2部分:電極用焦炭.第3節:用火焰原子吸收光譜法測定痕量元素 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of trace elements in green and calcined coke by flame atomic absorption spectroscopy |
| BS 6043-2.4-2000 | 制鋁工業用含碳材料的取樣和試驗方法.電極焦炭.用X射線熒光光譜分析法 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Analysis by X-ray fluorescence spectroscopy |
| BS 6043-2.6-1986 | 制鋁工業用炭素材料取樣與試驗方法.第2部分:電極用焦炭.第6節:焙燒焦炭二甲苯密度測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of the density in xylene of calcined cokes |
| BS 6043-2.7-1986 | 制鋁工業用炭素材料取樣與試驗方法.第2部分:電極用焦炭.第7節:焙燒焦炭表觀油含量測定(重量法) | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of the apparent oil content of calcined cokes (gravimetric method) |
| BS 6043-2.8-1987 | 制鋁工業用炭素材料取樣與試驗方法.第2部分:電極用焦炭.第8節:用焙燒焦炭溶劑萃取法測定油含量 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of oil content by solvent extraction of calcined coke |
| BS 6043-2.9-2000 | 制鋁工業用含碳材料的取樣和試驗方法.電極焦炭.粒度分布的測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of particle size distribution |
| BS 6043-3.1.1-1999 | 制鋁工業用含碳材料的取樣和試驗方法.電極.取樣.陰極取樣 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Sampling - Sampling of cathodes |
| BS 6043-3.1.2-1999 | 制鋁工業用含碳材料的取樣和試驗方法.電極.取樣.陽極取樣 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Sampling - Sampling of anodes |
| BS 6043-3.2-1997 | 制鋁工業用炭素材料抽樣和試驗方法.第3部分:電極.第2節:陰極塊和預焙陽極密度測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of density of cathode blocks and prebaked anodes |
| BS 6043-3.3-2000 | 制鋁工業用含碳材料的取樣和試驗方法.電極.用尺寸法測定陰極碳塊和預焙陽極的體密度(表觀密度) | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of the bulk density (apparent density) of cathode blocks and prebaked anodes using a dimensions method |
| BS 6043-3.4-2000 | 制鋁工業用含碳材料的取樣和試驗方法.電極.用流體靜力學法測定陰極碳塊和預焙陽極的開放式孔隙率和體密度( | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of the open porosity and bulk density (apparent density) of cathode blocks and prebaked anodes by a hydrostatic method |
| BS 6043-3.5.1-2000 | 制鋁工業用含碳材料的取樣和試驗方法.電極.抗彎強度的測定.三點法 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method |
| BS 6043-3.6-2000 | 制鋁工業用含碳材料的取樣和試驗方法.電極.室溫下陰極碳塊和預焙陽極電阻率的測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of electrical resistivity of cathode blocks and prebaked anodes at ambient temperature |
| BS 6043-3.8.1-2001 | 制鋁工業用含碳材料的取樣和試驗方法.電極.預焙陽極的羧基反應性.通過質量損失法測定化學反應性 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Carboxy reactivity of prebaked anodes - Determination of the reactivity by a loss in mass method |
| BS 6043-3.9.1-2002 | 制鋁工業用炭素材料的取樣與試驗方法.電極.預焙陽極對空氣的化學反應性.用質量損失法測定其化學反應性 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Chemical reactivity to air of prebaked anodes - Determination of the reactivity by a loss in mass method |
| BS 6043-4.0-1991 | 制鋁工業用炭素材料試驗及抽樣方法.第4部分:冷搗糊塊.第0節:總則 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - General introduction |
| BS 6043-4.1-2000 | 制鋁工業用含碳材料的取樣和試驗方法.冷搗糊料.取樣方法 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Methods of sampling |
| BS 6043-4.10-1991 | 制鋁工業用碳素材料的取樣和試驗方法.第4部分:冷搗糊塊.第10節:熱搗糊塊表觀孔隙率測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the apparent porosity of baked rammed paste |
| BS 6043-4.11-1991 | 制鋁工業用碳素材料取樣和試驗方法.第4部分:冷搗糊塊.第11節:烘焙搗糊塊熱膨脹性測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the thermal expansion of baked rammed paste |
| BS 6043-4.12-1992 | 制鋁工業用炭素材料取樣與試驗方法.第4部分:冷搗糊塊.第12節:烘焙搗糊塊熱導率測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the thermal conductivity of baked rammed paste |
| BS 6043-4.13-1991 | 制鋁工業用碳素材料取樣和試驗方法.第4部分:冷搗糊塊.第13節:烘焙搗實糊塊灰分測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of ash of baked rammed paste |
| BS 6043-4.2-2000 | 制鋁用碳素材料的取樣和試驗方法.冷壓糊料.通過喹啉萃取測定有效粘合劑含量和集料含量.集料尺寸分布的測定. | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution - Section 4. 2 Determination of effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution |
| BS 6043-4.3-1991 | 制鋁工業用炭素材料取樣和試驗方法.第4部分:冷搗糊塊.第3節:二氯甲烷萃取后集料粒徑分布測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of aggregate size distribution after extraction by dichloromethane |
| BS 6043-4.4-2000 | 制鋁工業用碳素材料的取樣和試驗方法.冷壓糊料.未烘燒糊料的揮發物含量的測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the volatile matter content of unbaked paste - Section 4.4 Determination of the volatile matter content of unbaked paste |
| BS 6043-4.5-1991 | 制鋁工業用碳素材料取樣和試驗方法.第4部分:冷搗糊塊.第5節:未烘焙糊塊含水量測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of water content of unbaked pastes |
| BS 6043-4.6-1991 | 制鋁工業用碳素材料取樣和試驗方法.第4部分:冷搗糊塊.第6節:未烘焙糊塊最大表觀搗實密度測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of maximum rammed apparent density of unbaked paste |
| BS 6043-4.7-1991 | 制鋁工業用炭素材料取樣和試驗方法.第4部分:冷搗糊塊.第7節:熱搗試塊制備和烘焙表觀密度、體積變化及質量損 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Preparation of baked rammed test pieces and determination of baked apparent density, change in volume and loss in mass |
| BS 6043-4.8-1991 | 制鋁工業用碳素材料取樣和試驗方法.第4部分:冷搗糊塊.第8節:烘焙搗實糊塊電阻率測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of electrical resistivity of baked rammed paste |
| BS 6043-4.9-1991 | 制鋁工業用炭素材料取樣和試驗方法.第4部分:冷搗糊塊.第9節:熱搗糊塊冷壓碎強度測定 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of the cold crushing strength of baked rammed paste |
| BS 6068-2.49-1995 | 水質.第2部分:物理、化學和生物化學法.第49節:鋁含量測定:鄰苯二酚紫光譜測定法 | Water quality - Physical, chemical and biochemical methods - Determination of aluminium - Spectrometric method using pyrocatechol violet |
| BS 6161-11-1985 | 鋁及鋁合金陽極氧化鍍層試驗方法.第11部分:光電反射計測量總反射率 | Methods of test for anodic oxidation coatings on aluminium and its alloys - Measurement of total reflectance using a photoelectric reflectometer |
| BS 6161-14-1987 | 鋁及鋁合金陽極氧化鍍層試驗方法.第14部分:紅外反射率測定 | Methods of test for anodic oxidation coatings on aluminium and its alloys - Determination of infra-red reflectance |
| BS 6161-18-1991 | 鋁及鋁合金陽極氧化鍍層試驗方法.第18部分:表面耐磨性測定 | Methods of test for anodic oxidation coatings on aluminium and its alloys - Determination of surface abrasion resistance |
| BS 6161-1993 | 鋁及其合金的陽極氧化鍍層的試驗方法.第19部分:圖象清晰度的測定.儀器測定法 | Methods of test for anodic oxidation coatings on aluminium and its alloys. Determination of image clarity. Instrumental method |
| BS 6161-7-1984 | 鋁及其合金陽極氧化鍍層試驗方法.第7部分:陽極氧化有色鍍層的人造光耐光度加速測定法 | Methods of test for anodic oxidation coatings on aluminium and its alloys - Accelerated determination of light fastness of coloured anodic oxidation coatings using artificial light |
| BS 6200-3.1.1-1991 | 鐵、鋼和其他鐵金屬的抽樣和分析.第3部分:分析方法.第1節:鋁含量測定.第1小節:鋼、鑄鐵、低碳鉻鐵和鉻金屬: | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of aluminium - Steel, cast iron, low carbon ferro-chromium and chromium metal: volumetric method |
| BS 6200-3.1.2-1991 | 鐵、鋼和其他黑色金屬抽樣和分析.第3部分:分析方法.第1節:鋁含量測定.第2小節:鋼和鑄鐵:分光光度法 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of aluminium - Steel and cast iron: spectrophotometric method |
| BS 6200-3.1.4-1990 | 鐵、鋼和其他黑色金屬抽樣和分析.第3部分:分析方法.第1節:鋁含量測定.第4小節:非合金鋼:火焰原子吸收分光光 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of aluminium - Non-alloyed steel: flame atomic absorption spectrometric method |
| BS 6200-3.1.5-1985 | 鐵、鋼和其他黑色金屬抽樣與分析.第3部分:分析方法.第1節:鋁含量測定.第5小節:鐵硅合金:原子吸收光譜法 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of aluminium - Ferrosilicon: atomic absorption spectrometric method |
| BS 6200-3.1.6-1991 | 鐵、鋼和其他黑色金屬抽樣與分析.第3部分:分析方法.第1節:鋁含量測定.第6小節:永磁合金:體積法 | Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of aluminium - Permanent magnet alloys: volumetric method |
| BS 6496-1984 | 施加并焙固于鋁合金的擠壓材、板材和預成型材(外部建筑用)的粉末有機涂層和帶有粉末有機涂層的鋁合金擠壓材 | Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with powder organic coatings |
| BS 6870-2.1-1987 | 鋁礦石分析.第2部分:化學方法.第1節:預干試樣的制備方法 | Analysis of aluminium ores - Chemical methods - Method of preparation of pre-dried test samples |
| BS 6870-2.2-1987 | 鋁礦石分析.第2部分:化學方法.第2節:分析試樣吸濕水分的測定方法:重力分析法 | Analysis of aluminium ores - Chemical methods - Method for determination of hygroscopic moisture in analytical samples: gravimetric method |
| BS 6870-2.3-1987 | 鋁礦石分析.化學方法.1075℃下的質量損失的測定方法:重力分析法 | Analysis of aluminium ores - Chemical methods - Method for determination of loss of mass at 1075 °C: gravimetric method |
| BS 6870-2.4-1987 | 鋁礦石分析.化學方法.含硅量的測定方法:重力和分光光度綜合分析法 | Analysis of aluminium ores - Chemical methods - Method for determination of silicon content: combined gravimetric and spectrophotometric method |
| BS 6870-2.5-1987 | 鋁礦石分析.化學方法.鐵含量測定方法:滴定法 | Analysis of aluminium ores - Chemical methods - Method for determination of iron content: titrimetric method |
| BS 6870-2.6-1987 | 鋁礦石分析.化學方法.鋁含量測定方法:乙二胺四乙酸(EDTA)滴定法 | Analysis of aluminium ores - Chemical methods - Method for determination of aluminium content: EDTA titrimetric method |
| BS 6870-2.7-1987 | 鋁礦石分析.化學方法.鈦含量測定方法:分光光度分析法 | Analysis of aluminium ores - Chemical methods - Method for determination of titanium content: spectrophotometric method |
| BS 6870-2.8-1987 | 鋁礦石分析.化學方法.磷含量測定方法:分光光度分析法 | Analysis of aluminium ores - Chemical methods - Method for determination of phosphorus content: spectrophotometric method |
| BS 6870-3-1989 | 鋁礦石分析.第3部分:采用波長色散式X射線熒光法對多元素分析的方法 | Analysis of aluminium ores - Method for multi-element analysis by wavelength dispersive X-ray fluorescence |
| BS 6878-1988+A2-1993 | 工業用高壓開關裝置和控制裝置用規范.鑄鋁合金外殼或充氣式高壓開關裝置和控制裝置 | Specification for high-voltage switchgear and controlgear for industrial use - Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear |
| BS 6886-1987 | 煉焦?fàn)t用硅酸鋁耐火材料規范 | Specification for alumino-silicate refractories for use in coke ovens |
| BS 6L 16-1985 | 99%鋁板材和帶材規范(強度符號-H14或H24) | Specification for sheet and strip of 99% aluminium (temper designation H14 or H24) |
| BS 6L 17-1985 | 99%鋁板材和帶材規范(強度符號-0) | Specification for sheet and strip of 99% aluminium (temper designation-O) |
| BS 7020-8.1-1988 | 鐵礦石分析.鋁含量測定方法.滴定法 | Analysis of iron ores - Methods for the determination of aluminium content - Titrimetric method |
| BS 7079-F10-2000 | 涂料和相關制品使用前鋼底襯材料的制備.非金屬噴砂清理磨料.鐵鋁榴石 | Preparation of steel substrates before application of paints and related products - Non-metallic blast-cleaning abrasives - Almandite garnet |
| BS 7252-10-1997 | 外科植物入用金屬材料.第10部分:煅制鈦5-鋁2.5-鐵合金規范 | Metallic materials for surgical implants - Specification for wrought titanium 5-aluminium 2,5-iron alloy |
| BS 7252-11-1995 | 外科植入物用金屬材料.第11部分:可鍛鈦6-鋁7-鈮合金規范 | Metallic materials for surgical implants - Specification for wrought titanium 6-aluminium 7-niobium alloy |
| BS 7252-3-1997 | 外科植入物用金屬材料.鍛制鈦6-鋁4-釩合金規范 | Metallic materials for surgical implants - Specification for wrought titanium 6-aluminium 4-vanadium alloy |
| BS 7253-2-1997 | 外科植入物用非金屬材料.高純度氧化鋁陶瓷材料規范 | Non-metallic materials for surgical implants - Specification for ceramic materials based on high purity alumina |
| BS 7315-1990+A1-1993 | 充氣式高壓開關裝置和控制裝置用鍛鋁和鋁合金殼體的規范 | Specification for Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear |
| BS 7455-7-1992 | 用火焰原子吸收光譜測定法對鎳合金的分析.第7部分:鋁含量的測定方法 | Analysis of nickel alloys by flame atomic absorption spectrometry - Method for determination of aluminium |
| BS 7609-1992 | 銅或鋁導線動力電纜用非絕緣壓縮和機械聯接器的安裝和檢驗實用規程 | Code of practice for installation and inspection of uninsulated compression and mechanical connectors for power cables with copper or aluminium conductors |
| BS 7709-4-1993 | 玻璃萃取溶液的分析.第4部分:采用分子吸收光譜法對二氧化鋁的測定方法 | Analysis of extract solutions of glass - Method for determination of aluminium oxide by molecular absorption spectrometry |
| BS 7870-3.10-2001 | 供電與動力裝置用低電壓和常電壓聚合絕緣電纜.額定電壓為0.6/1KV的配電電纜規范.有銅線或鋁導體的PVC隔絕的 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors |
| BS 7870-3.11-2001 | 供電與動力裝置用低電壓和常電壓聚合絕緣電纜.額定電壓為0.6/1KV的配電電纜規范.有銅線或鋁導體的XLPE隔絕 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors |
| BS 7870-3.12-2001 | 供電與動力裝置用低電壓和常電壓聚合絕緣電纜.額定電壓為0.6/1KV的配電電纜規范.當有火焰影響時煙和腐蝕性 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors, having low emission of smoke and corrosive gases when affected by fire |
| BS 7870-3.20-2001 | 供電與動力裝置用低電壓和常電壓聚合絕緣電纜.額定電壓為0.6/1KV的配電電纜規范.有銅或鋁導體的PVC隔絕的分 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - PVC insulated split concentric cables with copper or aluminium conductors |
| BS 7870-3.21-2001 | 供電與動力裝置用低電壓和常電壓聚合絕緣電纜.額定電壓為0.6/1KV的配電電纜規范.有銅或鋁導體的XLPE隔絕的 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated split concentric cables with copper or aluminium conductors |
| BS 7870-3.40-2001 | 供電與動力裝置用低電壓和常電壓聚合絕緣電纜.額定電壓為0.6/1KV的配電電纜規范.有固態鋁導體的銅線波型同 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated, copper wire waveform concentric cables with solid aluminium conductors |
| BS 7870-3.50-2005 | 配電和發電裝置用低壓和常壓聚合絕緣電纜.額定電壓為0.6/1KV的配電電纜規范.著火時輕微散發煙氣和腐蝕性氣 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for distribution cables of rated voltage 0.6/1 kV - XLPE insulated, copper wire waveform or helical concentric cables with solid aluminium conductors, having low emission of smoke and corrosive gases when affected by fire - (Implementation of HD 603) |
| BS 7870-7.1-2003 | 配電和發電設施用LV和MV聚合物絕緣電纜.電站用有防火性能的額定電壓為3.8/6.6KV和6.35/11KV電力電纜規范.鹵 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations - Single core and 3-core cables with halogenated materials and with aluminium or steel wire armouring |
| BS 7870-7.2-2003 | 配電和發電設施用LV和MV聚合絕緣電纜.電站用具有特殊防火性能的額定電壓為3.8/6.6KV和6.35/11KV電力電纜規 | LV and MV polymeric insulated cables for use by distribution and generation utilities - Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations - Single-core and 3-core cables with halogen-free materials and with aluminium or steel wire armouring |
| BS 7905-2-2000 | 演出、廣播和類似項目用提升設備.鋁和鋼桁架和塔狀構架的設計和制造規范 | Lifting equipment for performance, broadcast and similar applications - Specification for design and manufacture of aluminium and steel trusses and towers |
| BS 7906-2-2000 | 演出、廣播和類似項目用提升設備.鋁和鋼桁架和塔狀構架的使用實施規范 | Lifting equipment for performance, broadcast and similar applications - Code of practice for use of aluminium and steel trusses and towers |
| BS 7954-1999 | 珠狀干燥活性鋁氧粉規范 | Beaded desiccant activated alumina - Specification |
| BS 7L 37-1989 | 鋁-銅-鎂-硅-錳合金的整體冷鍛制鉚釘用金屬線規范(用于溶解處理和自然老化狀態)(直徑不超過10mm)(銅4.4、鎂 | Specification for wire for solid cold-forged rivets of aluminium-copper-magnesium-silicon-manganese alloy (for use in the solution treated and naturally aged condition) (not exceeding 10 mm diameter) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) (2014A) |
| BS 8118 Pt.2-1992 | 鋁的結構應用.第2部分;材料、工藝和防護規范 | Structural use of aluminium. Specification for materials, workmanship and protection |
| BS 8118-1-1992 | 鋁的結構使用.設計實用規程 | Structural use of aluminium - Code of practice for design |
| BS 8118-2-1992 | 鋁結構使用.材料、工藝和防護規范 | Structural use of aluminium - Specification for materials, workmanship and protection |
| BS 9124-2008 | 帶大于1m凈孔的鋼和鋁通路蓋設備用規范 | Specification for steel and aluminium access cover systems with over 1 m clear opening |
| BS AU 210-2-1994 | 大篷車和輕型掛車用拉桿.第2部分:鋁拉桿和底盤設計規范 | Drawbars for caravans and light trailers - Specification for the design of aluminium drawbars and chassis |
| BS B 23-1991 | 銅-鋁-鎳-鐵合金棒材、型材、鍛坯和鍛件規范 | Specification for copper-aluminium-nickel-iron alloy rods, sections, forging stock and forgings |
| BS CECC 30301 024-1981 | 固定式鋁電解質電容器(長壽命級)詳細規范.非固態電解質.圓形極性金屬外殼、箝位式或螺柱式安裝螺旋終端.全 | Harmonized detail specification for fixed aluminium electrolytic capacitors (long-life grade) - Non-solid electrolyte - Cylindrical, polar insulated metallic case, clamp or stud mounting screw terminations - Full plus additional assessment level |
| BS CECC 30302-1978 | 電子元器件用質量評估協調體系規范.空白詳細規范.固態介質鋁電解質電容器 | Specification for harmonized system of quality assessment for electronic components - Blank detail specification: aluminium electrolytic capacitors with solid electrolyte |
| BS CP 143-1-1958 | 薄板屋頂和墻面飾層的實施規程. 波紋和槽形薄鋁板 | Code of practice for sheet roof and wall coverings - Aluminium, corrugated and troughed |
| BS CP 143-15-1973 | 薄板屋頂和墻面飾層的實施規程.鋁.米制單位 | Code of practice for sheet roof and wall coverings - Code of practice for sheet roof and wall coverings - Aluminium - Metric units |
| BS CWA 15902-1-2008 | 娛樂業中舞臺和其他演出區域用提升和承載設備.一般要求(不包括鋁和鋼架及塔) | Lifting and load-bearing equipment for stages and other production areas within the entertainment industry - General requirements (excluding aluminium and steel trusses and towers) |
| BS CWA 15902-2-2008 | 娛樂業中舞臺和其他演出區域用提升和承載設備.設計、制造和鋁和鋼架及塔使用的規范 | Lifting and load-bearing equipment for stages and other production areas within the entertainment industry - Specifications for design, manufacture and for use of aluminium and steel trusses and towers |
| BS DD 139-1986 | 鋅鋁合金鑄錠和鑄件規范 | Specification for zinc-aluminium alloy ingots and castings |
| BS DD CEN/TS 15412-2006 | 固體再生燃料.金屬鋁測定方法 | Solid recovered fuels - Methods for the determination of metallic aluminium |
| BS DD ENV 14226-2002 | 高技術陶瓷.陶瓷粉末的試驗方法.使用燃燒原子吸收光譜測定法(FAAS)或誘導偶合等離子體-原子發射光譜法(ICP- | Advanced technical ceramics - Test methods for ceramic powders - Determination of calcium, magnesium, iron and aluminium in silicon nitride by using flame atomic absorption spectroscopy (FAAS) or inductively coupled plasma atomic emission spectroscopy (ICP-AES) |
| BS DD ENV 1999-1-2-2000 | 歐洲法規9.鋁合金結構件的設計.一般規則.結構的防火設計 | Eurocode 9. Design of aluminium structures. General rules. Structural fire design |
| BS EN 1011-4-2000 | 焊接.金屬材料焊接的推薦規范.鋁及鋁合金的電弧焊接 | Welding - Recommendations for welding of metallic materials - Arc welding of aluminium and aluminium alloys |
| BS EN 10244-3-2001 | 鋼絲及其制品.鋼絲上的非有色金屬涂層.鋁涂層 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Aluminium coatings |
| BS EN 10318-2005 | 測定鋅基和鋁基金屬覆層的厚度和化學成分.常規法 | Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method |
| BS EN 1090-2-2008 | 鋼結構和鋁結構的施工.鋼結構的執行用技術要求 | Execution of steel structures and aluminium structures - Technical requirements for the execution of steel structures |
| BS EN 1090-3-2008 | 鋼結構和鋁結構的施工.鋁結構的技術要求 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| BS EN 1092-4-2002 | 法蘭及其連接件.按PN標注的管道、閥門、配件和附件用圓形法蘭.鋁合金法蘭 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Aluminium alloy flanges |
| BS EN 12020-1-2008 | 鋁及鋁合金.合金EN AW-6060和EN AW-6063的擠壓精密型材:檢驗和交付用技術條件 | Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063: Technical conditions for inspection and delivery |
| BS EN 12020-2-2008 | 鋁及鋁合金.合金EN AW-6060和EN AW-6063擠壓的精密型材:尺寸和形狀公差 | Aluminium and aluminium alloys — Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 — Part 2: Tolerances on dimensions and form |
| BS EN 12206-1-2004 | 顏料和清漆.建筑用鋁和鋁合金涂層.涂覆粉末制涂層 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Coatings prepared from coating powder |
| BS EN 12258-1-1998 | 鋁和鋁合金.術語和定義.通用術語 | Aluminium and aluminium alloys - Terms and definitions - General terms |
| BS EN 12258-2-2004 | 鋁和鋁合金.術語和定義.化學分析 | Aluminium and aluminium alloys - Terms and definitions - Chemical analysis |
| BS EN 12258-3-2003 | 鋁和鋁合金.術語和定義.廢料 | Aluminium and aluminium alloys - Terms and definitions - Scrap |
| BS EN 12258-4-2004 | 鋁和鋁合金.術語和定義.鋁工業殘留物 | Aluminium and aluminium alloys - Terms and definitions - Residues of the aluminium industry |
| BS EN 12373-1-2001 | 鋁及鋁合金.陽極氧化.規定鋁裝飾和保護用陽極氧化覆層的方法 | Aluminium and aluminium alloys - Anodizing - Method for specifying decorative and protective anodic oxidation coatings on aluminium |
| BS EN 12373-10-1999 | 鋁和鋁合金.陽極氧化.使用磨損射流設備測定陽極氧化鍍涂層主要特殊磨損抗性 | Aluminium and aluminium alloys - Anodizing - Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus |
| BS EN 12373-11-2001 | 鋁和鋁合金.陽極氧化.20°、45°、60°和85°角的陽極氧化覆層的鏡面反射系數和鏡面光澤度的測量 | Aluminium and aluminium alloys - Anodizing - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 °, 45 °, 60 °, and 85 ° |
| BS EN 12373-12-2001 | 鋁和鋁合金.陽極氧化.用集成球形儀器測量鋁表面反射特性 | Aluminium and aluminium alloys - Anodizing - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments |
| BS EN 12373-13-2001 | 鋁和鋁合金.陽極氧化.用角度光度計或?yàn)V色角度光度計測量鋁表面反射特性 | Aluminium and aluminium alloys - Anodizing - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer |
| BS EN 12373-14-2001 | 鋁和鋁合金.陽極氧化.陽極氧化層鏡相清析的目視測定.表格刻度法 | Aluminium and aluminium alloys - Anodizing - Visual determination of image clarity of anodic oxidation coatings - Chart scale method |
| BS EN 12373-15-2001 | 鋁和鋁合金.陽極氧化.檢查變形評估陽極氧化層耐裂性 | Aluminium and aluminium alloys - Anodizing - Assessment of resistance of anodic oxidation coatings to cracking by deformation |
| BS EN 12373-16-2001 | 鋁及鋁合金.陽極氧化.陽極氧化薄覆層連續性檢查.硫酸銅試驗 | Aluminium and aluminium alloys - Anodizing - Check for continuity of thin anodic oxidation coatings - Copper sulfate test |
| BS EN 12373-17-2001 | 鋁及鋁合金.陽極化.電介質擊穿潛在性的測定 | Aluminium and aluminium alloys - Anodizing - Determination of electric breakdown potential |
| BS EN 12373-18-2001 | 鋁及鋁合金.陽極氧化.斑蝕評定的等級系統.圖表法 | Aluminium and aluminium alloys - Anodizing - Rating system for the evaluation of pitting corrosion - Chart method |
| BS EN 12373-19-2001 | 鋁及鋁合金.陽極氧化.斑蝕評定的等級系統.坐標法 | Aluminium and aluminium alloys - Anodizing - Rating system for the evaluation of pitting corrosion - Grid method |
| BS EN 12373-2-1999 | 鋁和鋁合金.陽極氧化.陽極氧化涂層單位面積(表面密度)質量的測定.重量劑法 | Aluminium and aluminium alloys - Anodizing - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method |
| BS EN 12373-3-1999 | 鋁和鋁合金.陽極氧化.陽極氧化涂層單位面積(表面密度)質量的測定.分束顯微鏡無損測量 | Aluminium and aluminium alloys - Anodizing - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope |
| BS EN 12373-4-1999 | 鋁和鋁合金.陽極氧化.預先酸處理的染料污點密封試驗的陽極氧鍍層吸收強度損失評估 | Aluminium and aluminium alloys - Anodizing - Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment |
| BS EN 12373-5-1999 | 鋁和鋁合金.陽極氧化.通過導納測量評估密封陽極氧化物鍍層質量 | Aluminium and aluminium alloys - Anodizing - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance |
| BS EN 12373-6-1999 | 鋁和鋁合金.陽極氧化.測定未預先酸處理的浸入磷酸/鉻酸溶液后質量損失以評估密封陽極氧化鍍層質量 | Aluminium and aluminium alloys - Anodizing - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment |
| BS EN 12373-7-1999 | 鋁和鋁合金.陽極氧化.測定預先酸處理的浸入磷酸/鉻酸溶液后質量損失評估密封陽極氧化鍍層質量 | Aluminium and aluminium alloys - Anodizing - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment |
| BS EN 12373-8-1999 | 鋁和鋁合金.陽極氧化.有色陽極氧化鍍層對紫外光和熱的比較牢固度測定 | Aluminium and aluminium alloys - Anodizing - Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings |
| BS EN 12373-9-1999 | 鋁和鋁合金.陽極氧化.使用磨損輪磨損試驗設備測定陽極氧化鍍層磨損指數和磨損抗性 | Aluminium and aluminium alloys - Anodizing - Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus |
| BS EN 12375-1998 | 包裝.軟鋁管.壁厚度測定方法 | Packaging - Flexible aluminium tubes - Wall thickness determination method |
| BS EN 12392-2000 | 鋁和鋁合金.鍛壓產品.生產壓力設備用產品專門要求 | Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment |
| BS EN 12441-1-2002 | 鋅及鋅合金.化學分析.鋅合金中鋁的測定.滴定法 | Zinc and zinc alloys - Chemical analysis - Determination of aluminium in zinc alloys - Titrimetric method |
| BS EN 12441-6-2003 | 鋅和鋅合金.化學分析.鋁及鐵含量的測定.火焰原子吸收光譜測定法 | Zinc and zinc alloys - Chemical analysis - Determination of aluminium and iron - Flame atomic absorption spectrometric method |
| BS EN 12475-1-1998 | 密度成型耐火產品分類.硅酸鋁產品 | Classification of dense shaped refractory products - Alumina-silica products |
| BS EN 12482-1-1998 | 鋁和鋁合金.通用重軋胚料.熱軋重軋胚料規范. | Aluminium and aluminium alloys - Reroll stock for general applications - Specifications for hot rolled reroll stock |
| BS EN 12482-2-1998 | 鋁和鋁合金.通用重軋胚料.冷軋重軋胚料規范. | Aluminium and aluminium alloys - Reroll stock for general applications - Specifications for cold rolled reroll stock |
| BS EN 12487-2007 | 金屬的腐蝕防護.鋁和鋁合金上經清洗和未清洗的鉻酸鹽轉化涂層 | Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| BS EN 12517-2-2008 | 焊縫的無損檢驗.通過射線照相術評估鋁及鋁合金的焊接接頭.驗收等級 | Non-destructive testing of welds - Part 2: Evaluation of welded joints in aluminium and its alloys by radiography - Acceptance levels |
| BS EN 12816-2001 | 便攜式可再灌裝的液化石油氣鋼瓶和鋁瓶.處置 | Transportable refillable steel and aluminium LPG cylinders - Disposal |
| BS EN 12862-2000 | 可運輸氣瓶.可反復灌裝可運輸焊接鋁合金氣瓶的設計和制造規范 | Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders |
| BS EN 12905-2005 | 人類生活用水處理產品.膨脹硅鋁酸鹽 | Products used for treatment of water intended for human consumption - Expanded aluminosilicate |
| BS EN 1301-1-2008 | 鋁和鋁合金.拉制鋼絲.檢驗和交付用技術條件 | Aluminium and aluminium alloys - Drawn wire - Technical conditions for inspection and delivery |
| BS EN 1301-2-2008 | 鋁和鋁合金.拉制鋼絲.機械性能 | Aluminium and aluminium alloys - Drawn wire - Mechanical properties |
| BS EN 1301-3-2008 | 鋁和鋁合金.拉制鋼絲.尺寸公差 | Aluminium and aluminium alloys - Drawn wire - Tolerances on dimensions |
| BS EN 1302-1999 | 人消耗用的水處理用化學物質.鋁基絮凝劑.分析方法 | Chemicals used for treatment of water intended for human consumption - Aluminium-based coagulants - Analytical methods |
| BS EN 13048-2000 | 包裝.鋁軟管.內部清漆膜厚度測量方法 | Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method |
| BS EN 13110-2002 | 液化石油氣用可運輸、可再充氣的焊接鋁瓶.設計和制造 | Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction |
| BS EN 13195-1-2002 | 鋁和鋁合金.海上(造船業,海運和近海工程)用煅造和鑄造產品.規范 | Aluminium and aluminium alloys - Wrought and cast products for marine applications (shipbuilding, marine and offshore) - Specifications |
| BS EN 13445-8-2006 | 非受火壓力容器.第8部分:鋁和鋁合金壓力容器附加要求 | Unfired pressure vessels — Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys |
| BS EN 13480-8-2007 | 金屬工業管道.第8部分:鋁和鋁合金管道附加要求 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
| BS EN 137100-1996 | 電子元件質量評估用協調體系.分規范.電動機起動器用非固體電解質的電解鋁交流固定電容器.合格鑒定 | Harmonized system of quality assessment for electronic components - Sectional specification - Fixed aluminium electrolytic a. c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval |
| BS EN 137101-1996 | 電子元器件質量評定協調體系.空白詳細規范.發電動機起動器鋁交流電解質固定電容器.合格鑒定批準 | Harmonized system of quality assessment for electronic components - Blank detail specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications (Qualification approval) |
| BS EN 13753-2002 | 人生活用水的水處理用品.粒狀活性鋁氧土 | Products used for treatment of water intended for human consumption - Granular activated alumina |
| BS EN 1386-2007 | 鋁和鋁合金.踏板.規范 | Aluminium and aluminium alloys - Tread plate - Specifications |
| BS EN 13920-1-2003 | 鋁和鋁合金.廢料.一般要求、取樣和試驗 | Aluminium and aluminium alloys - Scrap - General requirements, sampling and tests |
| BS EN 13920-10-2003 | 鋁和鋁合金.廢料.鋁制廢飲料罐的廢料 | Aluminium and aluminium alloys - Scrap - Scrap consisting of used aluminium beverage cans |
| BS EN 13920-11-2003 | 鋁和鋁合金.廢料.鋁銅散熱器的廢料 | Aluminium and aluminium alloys - Scrap - Scrap consisting of aluminium-copper radiators |
| BS EN 13920-12-2003 | 鋁和鋁合金.廢料.單一合金的車床切屑 | Aluminium and aluminium alloys - Scrap - Turnings consisting of one single alloy |
| BS EN 13920-13-2003 | 鋁和鋁合金.廢料.含兩種或多種合金的混合車床切屑 | Aluminium and aluminium alloys - Scrap - Mixed turnings consisting of two or more alloys |
| BS EN 13920-14-2003 | 鋁和鋁合金.廢料.廢鋁包裝件 | Aluminium and aluminium alloys - Scrap - Scrap from post-consumer aluminium packagings |
| BS EN 13920-15-2003 | 鋁和鋁合金.廢料.已去除廢鋁包裝件中涂層的鋁廢料 | Aluminium and aluminium alloys - Scrap - Decoated aluminium scrap from post-consumer aluminium packagings |
| BS EN 13920-16-2003 | 鋁和鋁合金.廢料.浮渣、渣滓、疤皮和金屬粒子的廢料 | Aluminium and aluminium alloys - Scrap - Scrap consisting of skimmings, drosses, spills and metallics |
| BS EN 13920-2-2003 | 鋁和鋁合金.廢料.非合金廢鋁 | Aluminium and aluminium alloys - Scrap - Unalloyed aluminium scrap |
| BS EN 13920-3-2003 | 鋁和鋁合金.廢料.廢金屬絲和電纜 | Aluminium and aluminium alloys - Scrap - Wire and cable scrap |
| BS EN 13920-4-2003 | 鋁和鋁合金.廢料.單一鍛造合金的廢料 | Aluminium and aluminium alloys - Scrap - Scrap consisting of one single wrought alloy |
| BS EN 13920-5-2003 | 鋁和鋁合金.廢料.同一系列兩種或多種鍛造合金的廢料 | Aluminium and aluminium alloys - Scrap - Scrap consisting of two or more wrought alloys of the same series |
| BS EN 13920-6-2003 | 鋁和鋁合金.廢料.含兩種或多種鍛造鋁合金的廢料 | Aluminium and aluminium alloys - Scrap - Scrap consisting of two or more wrought alloys |
| BS EN 13920-7-2003 | 鋁和鋁合金.廢料.鑄件廢料 | Aluminium and aluminium alloys - Scrap - Scrap consisting of castings |
| BS EN 13920-8-2003 | 鋁和鋁合金.廢料.為實施鋁分離加工，含粉碎加工產生的 非鐵材料廢料 | Aluminium and aluminium alloys - Scrap - Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes |
| BS EN 13920-9-2003 | 鋁和鋁合金.廢料.從粉碎的非鐵材料中分離出的鋁廢料 | Aluminium and aluminium alloys - Scrap - Scrap from aluminium separation processes of non-ferrous shredded materials |
| BS EN 13958-2008 | 鋁和鋁合金.一般用途的冷拉、圓形盤管.規范 | Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification |
| BS EN 1396-2007 | 鋁和鋁合金.通用卷繞涂層薄板材和帶材.規范 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| BS EN 13981-1-2003 | 鋁和鋁合金.結構性鐵道制品.檢驗和交貨技術條件.擠壓制品 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Extruded products |
| BS EN 13981-2-2004 | 鋁和鋁合金.結構性軌道用制品.檢驗和交貨技術條件.板材和薄板材 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Plates and sheets |
| BS EN 13981-3-2006 | 鋁和鋁合金.結構性鐵路設施用產品.檢驗和交貨用技術條件.鑄件 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Castings |
| BS EN 13981-4-2006 | 鋁和鋁合金.結構性鐵道設施用產品.檢驗和交貨技術條件.鍛制品 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Forgings |
| BS EN 14095-2004 | 建筑物內部水調節設備.鋁陽極的電解處理.性能、安全和試驗要求 | Water conditioning equipment inside buildings - Electrolytic treatment with aluminium anodes - Requirements for performance, safety and testing |
| BS EN 14121-2003 | 鋁和鋁合金.電工用鋁薄板、帶材和板材 | Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications |
| BS EN 14242-2004 | 鋁和鋁合金.化學分析.感應耦合等離子體光學輻射光譜分析 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
| BS EN 14287-2004 | 鋁和鋁合金.包裝和包裝元件制造用產品的化學成分的具體要求 | Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components |
| BS EN 14361-2004 | 鋁和鋁合金.化學分析.金屬熔料抽樣 | Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts |
| BS EN 14369-2003 | 人類用水處理用制品.覆鐵粒狀活性鋁 | Products used for treatment of water intended for human consumption - Iron-coated granular activated alumina |
| BS EN 14391-2004 | 包裝.可折疊鋁管.觸摸式危險警告 | Packaging - Collapsible aluminium tubes - Tactile warnings of danger |
| BS EN 14392-2007 | 鋁和鋁合金.與食品接觸的陽極產品的要求 | Aluminium and aluminium alloys - Requirements for anodised products for use in contact with foodstuff |
| BS EN 14532-3-2005 | 焊接消耗品.試驗方法和質量要求.鋁合金焊接用焊絲電極、焊絲和焊棒的合格評定 | Welding consumables - Test methods and quality requirements - Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys |
| BS EN 14647-2005 | 鋁酸鈣水泥.成分、規范和一致性標準 | Calcium aluminate cement - Composition, specifications and conformity criteria |
| BS EN 14726-2005 | 鋁和鋁合金.化學分析.閃光光學發射光譜測定分析指南 | Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis |
| BS EN 14730-1-2006 | 道路設施.軌道.鐵軌的鋁熱劑焊接.焊接過程的驗收 | Railway applications - Track - Aluminothermic welding of rails - Approval of welding processes |
| BS EN 14730-2-2006 | 道路設施.軌道.鐵軌的鋁熱劑焊接.鋁熱焊接工資格、合同認可和焊縫的驗收 | Railway applications - Track - Aluminothermic welding of rails - Qualifications of aluminothermic welders, approval of contractors and acceptance of welds |
| BS EN 14795-2005 | 液化石油氣(LPG)設備和附件.液化石油氣(LPG)用可運輸可再填充的鋁儲氣瓶.周期性檢驗 | LPG equipment and accessories - Transportable refillable aluminium cylinders for liquefied petroleum gas (LPG) - Periodic inspection |
| BS EN 14936-1-2006 | 銅和銅合金.鋁含量的測定.滴定法 | Copper and copper alloys - Determination of aluminium content - Titrimetric method |
| BS EN 14936-2-2006 | 銅和銅合金.鋁含量的測定.FAAS法 | Copper and copper alloys - Determination of aluminium content - FAAS method |
| BS EN 15006-2006 | 金屬霧化劑罐.鋁罐.孔徑25.4 mm尺寸 | Metal aerosol containers — Aluminium containers — Dimensions of the 25,4 mm aperture |
| BS EN 15008-2006 | 霧化劑罐.鋁罐.孔徑25.4 mm的整體罐尺寸 | Aerosol containers — Aluminium containers — Dimensions of one-piece cans with 25,4 mm aperture |
| BS EN 15010-2006 | 空氣溶膠容器.鋁罐.與鏈扣連接的基準尺寸公差 | Aerosol containers — Aluminium containers — Tolerances of the fundamenta dimensions in connection with the clinch |
| BS EN 15088-2005 | 鋁和鋁合金.施工作業用結構產品.檢驗和交付用技術條件 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery |
| BS EN 15206-2007 | 釉層和搪瓷.薄鋼板、薄鋁板和鑄鐵上測試瓷漆用試樣的制備 | Vitreous and porcelain enamels — Production of specimens for testing enamel on sheet steel, sheet aluminium and cast iron |
| BS EN 15384-2007 | 包裝.柔性鋁管.內部涂層空隙率測定用試驗方法 | Packaging - Flexible aluminium tubes - Test method to determine the porosity of the internal coating |
| BS EN 15421-2007 | 包裝.軟鋁管.內部和外部防護清漆粘附力的測定 | Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering |
| BS EN 15530-2008 | 鋁和鋁合金.鋁制品的環境效應.標準中包含環境效應的一般指南 | Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards |
| BS EN 1559-4-1999 | 鑄造.交付技術狀態.鋁合金鑄件的附加要求 | Founding - Technical conditions of delivery - Additional requirements for aluminium alloy castings |
| BS EN 1592-1-1998 | 鋁和鋁合金.HF縫焊管.檢驗和交付技術狀態 | Aluminium and aluminium alloys - HF seam welded tubes - Technical conditions for inspection and delivery |
| BS EN 1592-2-1998 | 鋁和鋁合金.HF縫焊管.機械特性 | Aluminium and aluminium alloys - HF seam welded tubes - Mechanical properties |
| BS EN 1592-3-1998 | 鋁和鋁合金.HF縫焊管.圓形管的尺寸和形狀公差 | Aluminium and aluminium alloys - HF seam welded tubes - Tolerances on dimensions and form for circular tubes |
| BS EN 1592-4-1998 | 鋁和鋁合金.HF縫焊管.正方形、矩形和異型管的尺寸和形狀公差 | Aluminium and aluminium alloys - HF seam welded tubes - Tolerances on dimensions and form for square, rectangular and shaped tubes |
| BS EN 1669-1997 | 鋁及鋁合金試驗方法.薄板材和帶材的耳索試驗 | Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip |
| BS EN 1676-1997 | 鋁及鋁合金試驗方法.再熔用的合金鑄錠.規范 | Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications |
| BS EN 1706-1998 | 鋁及鋁合金.鑄件.化學成分和機械特性 | Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
| BS EN 1715-2-2008 | 鋁和鋁合金.繪圖臺.電氣應用的特殊要求 | Aluminium and aluminium alloys - Drawing stock - Specific requirements for electrical applications |
| BS EN 1715-3-2008 | 鋁和鋁合金.拉制坯料.機械用途(不包括焊接)特殊要求 | Aluminium and aluminium alloys - Drawing stock - Specific requirements for mechanical uses (excluding welding) |
| BS EN 1759-4-2003 | 法蘭及其連接件.標注等級的管道、閥門、配件及附件用圓形法蘭.鋁合金法蘭 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Aluminium alloy flanges |
| BS EN 1780-1-2002 | 鋁和鋁合金.再熔、母合金和鑄件的非合金和合金鋁錠的命名.數字命名系統 | Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings - Numerical designation system |
| BS EN 1780-2-2002 | 鋁和鋁合金.再熔、母合金和鑄件用非合金和合金鋁錠的命名.用化學符號表示命名系統 | Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings - Chemical symbol based designation system |
| BS EN 1780-3-2002 | 鋁和鋁合金.再熔、母合金和鑄件的非合金和合金鋁錠的命名.化學成份的書寫規則 | Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings - Writing rules for chemical composition |
| BS EN 1802-2002 | 可運輸儲氣瓶.無縫鋁合金儲氣瓶的周期性檢驗和測試 | Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders |
| BS EN 1967-2002 | 結構膠粘劑.用與漂浮滾筒法有關的濕剝離試驗評價鋁表面處理技術的有效性 | Structural adhesives - Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method |
| BS EN 1975-2000 | 便攜氣體鋼瓶.容量由0,5升到150升(包括150升)的由無縫鋁和鋁合金制氣體瓶的設計和結構規范. | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litre |
| BS EN 1999-1-1-2007 | 歐洲法規9:鋁結構的設計.一般結構規則 | Eurocode 9: Design of aluminium structures — Part 1-1: General structural rules |
| BS EN 1999-1-2-2007 | 歐洲法規9.鋁結構設計.結構防火設計 | Eurocode 9. Design of aluminium structures - Structural fire design |
| BS EN 1999-1-3-2007 | 歐洲法規9:鋁結構的設計.易疲勞的結構 | Eurocode 9. Design of aluminium structures - Structures susceptible to fatigue |
| BS EN 1999-1-4-2007 | 歐洲法規9:鋁結構設計.冷成型結構鋼板 | Eurocode 9 — Design of aluminium structures — Part 1-4: Cold-formed structural sheeting |
| BS EN 1999-1-5-2007 | 鋁結構設計.殼層結構 | Eurocode 9 — Design of aluminium structures — Part 1-5: Shell structures |
| BS EN 2004-1-1993 | 鋁和鋁合金產品試驗方法.第1部分:鍛鋁合金電導率的測定 | Test methods for aluminium and aluminium alloy products - Determination of electrical conductivity of wrought aluminium alloys |
| BS EN 2004-5-1993 | 鋁和鋁合金產品試驗方法.第5部分:復合半成品的包層厚度和銅擴散的測定 | Test methods for aluminium and aluminium alloy products - Determination of cladding thickness and copper diffusion of clad semi-finished products |
| BS EN 2044-2001 | 航空航天系列.鋁及鋁合金拉制圓棒.公差等級h11.直徑為4mm D 63mm.尺寸 | Aerospace series - Round bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm D 63 mm - Dimensions |
| BS EN 2045-2001 | 航空航天系列.鋁及鋁合金拉制方棒.公差等級h11.厚度為6mm a 50mm.尺寸 | Aerospace series - Square bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm a 50 mm - Dimensions |
| BS EN 2046-2001 | 鋁及鋁合金拉制六角形棒材.公差等級h11.對邊寬度為7mm a 50mm.尺寸 | Hexagonal bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Width across flats 7 mm a 50 mm - Dimensions |
| BS EN 2047-2001 | 航空航天系列.帶邊的L形鋁及鋁合金擠壓件.尺寸 | Aerospace series - Beaded L-section extruded, in aluminium and aluminium alloys - Dimensions |
| BS EN 2048-2001 | 航空航天系列.鋁合金L形擠壓型材.尺寸 | Aerospace series - Extruded L-section in aluminium alloys - Dimensions |
| BS EN 2049-2001 | 航空航天系列.U形鋁及鋁合金擠壓件.尺寸 | Aerospace series - Extruded channel section, in aluminium alloys - Dimensions |
| BS EN 2050-2001 | 航空航天系列.T形鋁及鋁合金擠壓件.尺寸 | Aerospace series - Extruded T-section, in aluminium alloys - Dimensions |
| BS EN 2066-2002 | 航空航天系列.鋁合金擠制型材.一般公差 | Aerospace series - Extruded section in aluminium alloys - General tolerances |
| BS EN 2070-1-1991 | 鋁和鋁合金鍛制品規范.技術規范.一般要求 | Specification for aluminium and aluminium alloy wrought products - Technical specification - General requirements |
| BS EN 2070-2-1991 | 鋁和鋁合金鍛制品規范.技術規范.薄板材、帶成形的型材和中厚板材 | Specification for aluminium and aluminium alloy wrought products - Technical specification - Sheet, strip formed profiles and plate |
| BS EN 2070-3-1991 | 鋁和鋁合金鍛制品規范.技術規范.棒材和型材 | Specification for aluminium and aluminium alloy wrought products - Technical specification - Bar and section |
| BS EN 2070-4-1991 | 鋁和鋁合金鍛制產品規范.技術規范.結構管材 | Specification for aluminium and aluminium alloy wrought products - Technical specification - Tube for structures |
| BS EN 2070-5-1991 | 鋁和鋁合金鍛制品規范.技術規范.承壓用的管材 | Specification for aluminium and aluminium alloy wrought products - Technical specification - Tube used under pressure |
| BS EN 2070-6-1991 | 鋁和鋁合金鍛制品規范.技術規范.鉚釘絲材 | Specification for aluminium and aluminium alloy wrought products - Technical specification - Rivet wire |
| BS EN 2070-7-1991 | 鋁和鋁合金鍛制品規范.技術規范.鍛坯 | Specification for aluminium and aluminium alloy wrought products - Technical specification - Wrought forging stock |
| BS EN 2071-2002 | 航空航天系列.鋁及鋁合金板.厚度為0.25mm a 6mm.尺寸 | Aerospace series - Sheets in aluminium and aluminium alloys - Thickness 0,25 mm a 6 mm - Dimensions |
| BS EN 2072-2005 | 航空航天系列.AL-P1050A型鋁合金.H14.薄板材和帶材.0.4mm≤a≤6mm | Aerospace series - Aluminium AL-P1050A - H14 - Sheet and strip - 0, 4 mm a 6 mm |
| BS EN 2076-1-1991 | 鋁和鎂合金鑄錠和鑄件.技術規范.一般要求 | Aluminium and magnesium alloy ingots and castings - Technical specification - General requirements |
| BS EN 2076-2-1991 | 鋁和鎂合金鑄錠和鑄件.技術規范.重熔用的鑄錠 | Aluminium and magnesium alloy ingots and castings - Technical specification - Ingots for remelting |
| BS EN 2076-3-1991 | 鋁和鎂合金鑄錠和鑄件.技術規范.預生產鑄件和生產鑄件 | Aluminium and magnesium alloy ingots and castings - Technical specification - Pre-production and production castings |
| BS EN 2082-1-1991 | 鋁合金鍛坯和鍛件規范.技術規范.一般要求 | Specification for aluminium alloy forging stock and forgings - Technical specification - General requirements |
| BS EN 2082-2-1991 | 鋁合金鍛坯和鍛件規范.技術規范.鍛坯 | Specification for aluminium alloy forging stock and forgings - Technical specification - Forging stock |
| BS EN 2082-3-1991 | 鋁合金鍛坯和鍛件規范.技術規范.試生產鍛件和生產鍛件 | Specification for aluminium alloy forging stock and forgings - Technical specification - Pre-production and production forgings |
| BS EN 2085-2005 | 航空航天系列.鋁合金AL-P2618A-T6.手鍛和模鍛件.a150 mm | Aerospace series - Aluminium alloy AL-P2618A-T6 - Hand and die forgings - a 150 mm |
| BS EN 2086-2005 | 航空航天系列.鋁合金AL-P2618A-T851.手鍛和模鍛.a150 mm | Aerospace series - Aluminium alloy AL-P2618A-T851 - Hand and die forgings - a 150 mm |
| BS EN 2087-2005 | 航空航天系列.AL-P2014A型鋁合金.T6或T62.覆層薄板材和帶材0.4mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheet & strip 0,4 mm a 6 mm |
| BS EN 2088-2005 | 航空航天系列.AL-P2014A-T4型或AL-P2014A-T42型鋁合金.覆層薄板材和帶材.0.4mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P2014A - T4 or T42 - Clad sheet and strip - 0,4 mm a 6 mm |
| BS EN 2089-2005 | AL-P2014A T6或T62鋁合金.0.4mm-6mm的薄板及帶材 | Aluminium alloy AL-P2014A T6 or T62 - Sheet and strip - 0,4 mm a 6 mm |
| BS EN 2090-2005 | 鋁合金AL-P2024-T3.覆層薄板和帶材.0.3 mm≤a≤6 mm | Aluminium alloy AL-P2024-T3 - Clad sheet and strip - 0,3 mm a 6 mm |
| BS EN 2092-2005 | 航空航天系列.AL-P7075.T6或T62型鋁合金.覆層鋁合金板材及帶材.0.4mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip - 0,4 mm a 6 mm |
| BS EN 2093-1992 | AL-P 7009-T74鋁合金.20mm≤a≤150mm手工鍛件 | Aluminium alloy AL-P7009-T74 - Hand forgings 20 mm a 150 mm |
| BS EN 2094-1992 | AL-P 7009-T74鋁合金.3mm≤a≤150mm模鍛件 | Aluminium alloy AL-P7009-T74 - Die forgings 3 mm a 150 mm |
| BS EN 2100-1992 | AL-P2014A-T4511鋁合金.a或D≤200mm的擠壓棒材和型材 | Aluminium alloy AL-P2014A-T4511 - Extruded bars and sections a or D 200 mm |
| BS EN 2101-1991 | 鋁合金和鍛鋁合金鉻酸陽極化規范 | Specification for chromic acid anodizing of aluminium and wrought aluminium alloys |
| BS EN 2122-1996 | 經陽極電鍍或鉻酸鹽處理的扁平鋁合金墊圈 | Washers, flat, in aluminium alloy, anodized or chromated |
| BS EN 2126-1992 | AL-P7075-T651鋁合金.6mm≤a≤80mm板材 | Aluminium alloy AL-P7075-T651 - Plate 6 mm a 80 mm |
| BS EN 2127-1992 | AL-P7075-T73511鋁合金.a或D≤100mm的擠壓棒材和型材 | Aluminium alloy AL-P7075-T73511 - Extruded bars and sections a or D 100 mm |
| BS EN 2128-1992 | AL-P7075-T7351鋁合金.6mm≤a或D≤75mm拉制棒材 | Aluminium alloy AL-P7075-T7351 - Drawn bars 6 mm a or D 75 mm |
| BS EN 2131-2002 | 航空航天系列.鋁合金板.厚度6mm < a> 160mm.尺寸 | Aerospace series - Plates in aluminium alloys - Thickness 6 mm a 160 mm - Dimensions |
| BS EN 2134-2002 | 航空航天系列.鋁及鋁合金擠制圓棒.直徑為10mm D 220mm.尺寸 | Aerospace series - Round bars, extruded in aluminium and aluminium alloys - Diameter 10 mm D 220 mm - Dimensions |
| BS EN 2143-1993 | 1050A型鋁制通用頭型實心鉚釘.英制系列 | Rivets, solid, universal head, in aluminium 1050A, inch based series |
| BS EN 2144-1994 | 鋁合金2117通用頭型實心鉚釘.英制系列 | Rivets, solid, universal head, in aluminium alloy 2117, inch based series |
| BS EN 2145-1994 | 英制系列的陽極氧化或鉻酸鹽處理的2117號鋁合金通用頭實心鉚釘 | Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series |
| BS EN 2146-1993 | 2017A型鋁制通用頭型實心鉚釘.英制系列 | Rivets, solid, universal head, in aluminium alloy 2017A, inch based series |
| BS EN 2148-1993 | 5056A型鋁制通用頭型實心鉚釘.英制系列 | Rivets, solid, universal head, in aluminium alloy 5056A, inch based series |
| BS EN 2149-1996 | 經陽極電鍍或鉻酸鹽處理的5056A型鋁合金通用頭型實心鉚釘.英制系列 | Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series |
| BS EN 2256-2005 | 航空航天系列.鋁合金AL-P2618A-T852.手鍛和模鍛.a150 mm | Aerospace series - Aluminium alloy AL-P2618A-T852 - Hand and die forgings - a 150 mm |
| BS EN 2257-1997 | 鋁和鋁合金結構用圓管.直徑為6mmD100mm.厚度為1mma6mm.尺寸 | Circular tubes for structures in aluminium and aluminium alloys - Diameter 6 mm D 100 mm - Thickness 1 mm a 6 mm - Dimensions |
| BS EN 2258-1997 | 鋁和鋁合金流體用圓管.直徑為3.2mmD100mm.厚度為0.5mma2.5mm.尺寸 | Circular tubes for fluids in aluminium and aluminium alloys - Diameter 3,2 mm D 100 mm - Thickness 0,6 mm a 2,5 mm - Dimensions |
| BS EN 2284-1991 | 鋁合金和鍛鋁合金硫酸陽極化規范 | Specification for sulfuric acid anodizing of aluminium and wrought aluminium alloys |
| BS EN 2285-1990 | 帶自潤滑內襯的鋁合金普通套管規范.尺寸和負荷 | Specification for bushes plain, aluminium alloy with self-lubricating liner - Dimensions and loads |
| BS EN 2286-1990 | 帶自潤滑內襯的鋁合金帶法蘭緣的套管規范.尺寸和負荷 | Specification for bushes flanged, aluminium alloy with self-lubricating liner - Dimensions and loads |
| BS EN 2289-1996 | 飛行控制用鋁合金拉桿.技術規范 | Rod bodies in aluminium alloy for flight controls - Technical specification |
| BS EN 2290-1-1998 | 飛行控制可調節終端配合鋁合金桿.尺寸和荷載 | Rod bodies, flight control in aluminium alloy, for adjustable end fittings - Dimensions and loads |
| BS EN 2318-1992 | AL-P2024-T3511鋁合金.1,2mm≤a或D≤150mm的擠壓棒材和型材 | Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm a or D 150 mm |
| BS EN 2326-1992 | AL-P6082-T6鋁合金.a或D≤200mm的擠壓棒材和型材 | Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D 200 mm |
| BS EN 2334-1997 | 鋁和鋁合金鉻硫酸液 | Chromic-sulphuric acid pickle of aluminium and aluminium alloys |
| BS EN 2365-1989 | 鋁合金軸環規范 | Specification for collars, aluminium alloy |
| BS EN 2381-1992 | AL-P7009-T7452鋁合金.40mm≤a≤150mm的手工鍛件 | Aluminium alloy AL-P7009-T7452 - Hand forgings 40 mm a 150 mm |
| BS EN 2384-1992 | AL-P2014-T6511鋁合金.a或D≤150mm的擠壓棒材和型材 | Aluminium alloy AL-P2014A-T6511 - Extruded bars and sections a or D 150 mm |
| BS EN 2385-1992 | AL-P7009-T74511鋁合金.a或D≤125mm的擠壓棒材和型材 | Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D 125 mm |
| BS EN 2395-2005 | 航空航天系列.AL-P2014A-T4或T42型鋁合金.0.4mm≤a≤6mm薄板材和帶材 | Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Sheet and strip - 0,4 mm a 6 mm |
| BS EN 2422-2005 | 鋁合金AL-P2124-T351.板材.25 mm≤a≤120 mm | Aluminium alloy AL-P2124-T351 - Plate - 25 mm a 120 mm |
| BS EN 2437-2002 | 航空航天系列.鋁及鋁合金的鉻酸鹽轉化涂層(黃色) | Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys |
| BS EN 2486-2005 | 航天航空系列.AL-P2618A 型鋁合金.鍛坯件 | Aerospace series - Aluminium alloy AL-P2618A - Forging stock |
| BS EN 2511-2005 | 鋁合金AL-P7075-T7351.板材.6 mm≤a≤100 mm | Aluminium alloy AL-P7075-T7351 - Plate - 6 mm a 100 mm |
| BS EN 2536-1995 | 鋁合金的硬陽極氧化 | Hard anodizing of aluminium alloys |
| BS EN 2550-1993 | 1050A型鋁制100°標準埋頭實心鉚釘.英制系列 | Rivets, solid 100 ° normal countersunk head, in aluminium 1050A, inch based series |
| BS EN 2551-1993 | 2117型鋁合金制100°標準埋頭圓頂實心鉚釘.英制系列 | Rivets, solid, 100 ° normal countersunk head with dome, in aluminium alloy 2117, inch based series |
| BS EN 2552-1993 | 經陽極氧化或鉻酸鹽表面處理的2117型鋁合金制100°標準埋頭圓頂實心鉚釘.英制系列 | Rivets, solid, 100 ° normal countersunk head with dome, in aluminium alloy 2117, anodized or chromated, inch based series |
| BS EN 2553-1993 | 2017A型鋁合金制100°標準埋頭圓頂實心鉚釘.英制系列 | Rivets, solid, 100 ° normal countersunk head with dome, in aluminium alloy 2017A, inch based series |
| BS EN 2555-1993 | 5056A型鋁合金制100°標準埋頭圓頂實心鉚釘.英制系列 | Rivets, solid, 100 ° normal countersunk head with dome, in aluminium alloy 5056A, inch based series |
| BS EN 2556-1993 | 經陽極氧化或鉻酸鹽表面處理的5056A型鋁合金制100°標準埋頭圓頂實心鉚釘.英制系列 | Rivets, solid, 100 ° normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series |
| BS EN 2599-2001 | 航空航天系列.鋁和鋁合金帶材.厚度0.25mm,3.2mm.尺寸 | Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm a 3.2 mm - Dimensions |
| BS EN 2630-1994 | AL-P7009-T74511鋁合金.對周邊粗晶粒控制的a或D為125mm 擠壓棒材和型材 | Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D 125 mm with peripheral coarse grain control |
| BS EN 2632-2005 | 航空航天系列.AL-P7075型鋁合金.T73511.擠壓棒材和型材.周邊粗晶粒控制a或D≤150mm | Aerospace series - Aluminim alloy AL-P7075 - T73511 - Extruded bar and section - a or D 150 mm with peripheral coarse grain control |
| BS EN 2633-1994 | 鋁合金AL-P2024-T3511.對周邊粗晶粒控制的1,2 mm 或D≤150mm擠壓棒材和型材. | Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm a or D 150 mm with peripheral coarse grain control |
| BS EN 2635-2005 | 航空航天系列.AL-P2014A型鋁合金.T6511.擠壓棒材和型材.周邊粗粒控制a/D≤200mm | Aerospace series - Aluminium alloy AL-P2014A - T6511 - Extruded bar and section - a or D 200 mm with peripheral coarse grain control |
| BS EN 2636-1994 | 鋁合金AL-P6082-T6.對周邊粗晶粒控制的擠壓棒材和型材.a或D≤200mm, | Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D 200 mm with peripheral coarse grain control |
| BS EN 2680-2006 | 航空航天系列.MoS2潤滑鎘鍍層鋁合金雙耳游動自調自鎖托板螺母.等級:900MPa(室溫)/235℃ | Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 235 °C |
| BS EN 2681-2005 | 航空航天系列.鋁合金AL-P7010-T74.手鍛和模鍛.a150 mm | Aerospace series - Aluminium alloy AL-P7010-T74 - Hand and die forgings - a 150 mm |
| BS EN 2684-2005 | 航空航天系列.鋁合金AL-P7010-T7651.板材.6mma140mm | Aerospace series - Aluminium alloy AL-P7010-T7651 - Plate - 6 mm a 140 mm |
| BS EN 2687-2005 | 航空航天系列.鋁合金AL-P7010-T7451.板材.6mma160mm | Aerospace series - Aluminium alloy AL-P7010-T7451 - Plate - 6 mm a 160 mm |
| BS EN 2693-2005 | 航空航天系列.AL-P5086-H111型鋁合金.0.3mm≤a≤6mm 薄板材和帶材 | Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip - 0,3 mm a 6 mm |
| BS EN 2694-2005 | 航空航天系列.AL-P6061-T6或T62鋁合金.0.4mm≤a≤6mm 薄板和帶材 | Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Sheet and strip - 0,4 mm a 6 mm |
| BS EN 2695-2005 | 航空航天系列.AL-P6081-T6型鋁合金.0.3mm≤a≤6mm薄板材和帶材 | Aerospace series - Aluminium alloy AL-P6081-T6 - Sheet and strip - 0,3 mm a 6 mm |
| BS EN 2696-2005 | 航空航天系列.AL-P7075-T6或T62型鋁合金.0.4mm≤a≤6mm薄板材和帶材 | Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Sheet and strip - 0,4 mm a 6 mm |
| BS EN 2702-2005 | 航空航天系列.鋁合金.AL-P6061-T6或T62.拉拔或擠壓棒材和型材.a/D≤200mm | Aerospace series - Aluminium alloy - AL-P6061 - T6 or T62 - Drawn or extruded bar and section - a or D 200 mm |
| BS EN 2703-2005 | 鋁合金AL-P2024-T4或T42.覆層薄板和帶材.0.3 mm≤a≤6 mm | Aluminium alloy AL-P2024-T4 or T42 - Clad sheet and strip - 0,3 mm a 6 mm |
| BS EN 2802-2005 | 鋁合金AL-P7475-T761.薄板和帶材.0.6 mm≤a≤6 mm | Aluminium alloy AL-P7475-T761 - Sheet and strip - 0,6 mm a 6 mm |
| BS EN 2803-2005 | 航空航天系列.AL-P7475-T761型鋁合金.覆層薄板材和帶材.1.0mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P7475-T761 - Clad sheet and strip - 1,0 mm a 6 mm |
| BS EN 286-4-1995 | 裝空氣或氮?dú)庥玫牟稽c(diǎn)火加熱的一般壓力容器.第4部分:用于鐵路運輸車輛空氣制動和輔助氣動設備的鋁合金壓力 | Simple unfired pressure vessels designed to contain air or nitrogen - Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| BS EN 2912-1996 | 經陽極化或鉻酸鈍化處理的鋁合金大直徑扁平墊圈 | Washers, flat, large diameter, in aluminium alloy, anodized or chromated |
| BS EN 3332-2005 | 航空航天系列.AL-P7475-T762型鋁合金.覆層鋁合金薄板材和帶材.1.0mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P7475-T762 - Clad sheet and strip - 1,0 mm a 6 mm |
| BS EN 3333-2005 | 鋁合金AL-P7475-T762.薄板和帶材.0.6 mm≤a≤6 mm | Aluminium alloy AL-P7475-T762 - Sheet and strip - 0,6 mm a 6 mm |
| BS EN 3335-2005 | 鋁合金AL-P7475-O2.超塑性成型用薄板(SPF).0.8 mm≤a≤6 mm | Aluminium alloy AL-P7475-O2 - Sheet for superplastic forming (SPF) - 0,8 mm a 6 mm |
| BS EN 3338-2005 | 航空航天系列.AL-P7050型鋁合金.T74511.擠壓棒材和型材.周邊粗粒控制a/D≤150 mm | Aerospace series - Aluminim alloy AL-P7050 - T74511 - Extruded bar and section - a or D 150 mm with peripheral coarse grain control |
| BS EN 3339-2006 | 航空航天系列.AL-P7010-T76型鋁合金.壓模鍛件.a≤200mm | Aerospace series — Aluminium alloy AL-P7010- — T76 — Die forgings — a u 200 mm |
| BS EN 3341-2005 | 鋁合金AL-P6061-T4或T42.薄板和帶材.0.4 mm≤a≤6 mm | Aluminium alloy AL-P6061-T4 or T42 - Sheet and strip - 0,4 mm a 6 mm |
| BS EN 3342-2005 | 航空航天系列.AL-P6061型鋁合金.T4或T42.拉拔或擠壓棒材和型材.a/D≤150mm | Aerospace series - Aluminim alloy AL-P6061 - T4 or T42 - Drawn or extruded bar and section - a or D 150 mm |
| BS EN 3344-2005 | 航空航天系列.AL-P7050型鋁合金.T76511.擠壓棒材和型材.周邊粗粒控制a或D≤150mm | Aerospace series - Aluminim alloy AL-P7050 - T76511 - Extruded bar and section - a or D $3l 150 mm with peripheral coarse grain control |
| BS EN 3347-2005 | 航空航天系列.AL-P2024型鋁合金.T8511.擠壓棒材和型材.周邊粗粒控制a/D≤150mm | Aerospace series - Aluminim alloy AL-P2024 - T8511 - Extruded bar and section - a or D 150 mm with peripheral coarse grain control |
| BS EN 3474-2005 | 航空航天系列.AL-P2024-T81型鋁合金.薄板材和帶材.0.25mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm $3l a 6 mm |
| BS EN 3475-514-2007 | 航空航天系列.航空器用電纜.試驗方法.鋁絞線上鍍銅的孔隙率 | Aerospace series - Cables, electrical, aircraft use - Test methods - Porosity of copper cladding on aluminium strands |
| BS EN 3552-2005 | 鋁合金AL-P2618A-T6或T62.覆層薄板和帶材.0.4 mm≤a≤6 mm | Aerospace series - Aluminium alloy AL-P2618A-T6 or T62 - Clad sheet and strip - 0,4 mm a 6 mm |
| BS EN 3553-2005 | 航空航天系列.鋁合金AL-P2618A-T6511.擠制棒材和型材.a或D160mm | Aerospace series - Aluminium alloy AL-P2618A-T6511 - Extruded bar and section - a or D 160 mm |
| BS EN 3665-1997 | 清漆和涂料檢驗方法.鋁合金耐纖維狀腐蝕檢驗 | Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys |
| BS EN 3719-2005 | 電纜的鋁或鋁合金導體.產品標準 | Aluminium or aluminium alloy conductors for electrical cables — Product standard |
| BS EN 3730-2001 | 航空航天系列..鞍座形夾子.帶橡膠彈性墊料的鋁合金的固定式滑動型.尺寸.質量 | Aerospace series - Clamps, saddle - Fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions - Masses |
| BS EN 3869-2004 | 航空航天系列.管連接件、松套法蘭和密封件.碳氟化合物橡膠密封件和鋁合金保護殼 | Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy |
| BS EN 3872-2005 | 航空航天系列.AL-R39002-H112型鋁合金.模鍛件.a≤200mm | Aerospace series - Aluminium alloy AL-R39002-H112 - Die forgings - a 200mm |
| BS EN 3979-2005 | 航空航天系列.AL-P8090-O2型鋁合金.超塑性成型(SPF)用薄板材.0.8mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P8090-O2 - Sheet for superplastic forming (SPF) - 0,8 mm a 6 mm |
| BS EN 3997-2007 | 航空航天系列.AL-P2024-T3型鋁合金.薄板材和帶材.0.4mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P2024-T3 - Sheet and strip 0,4 mm $3Q a $3Q 6 mm |
| BS EN 3998-2007 | 航空航天系列.AL-P2024-T4或T42型鋁合金.薄板材和帶材.0.3mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Sheet and strip - 0,3 mm a 6 mm |
| BS EN 3999-2007 | 航空航天系列.AL-P2024-T351型鋁合金.改進的化學銑削性能1.6mm≤a≤6mm的薄板材和帶材 | Aerospace series — Aluminium alloy AL-P2024-T351 — Sheet and strip with improved chemical milling capability 1,6 mm ≤ 6 mm |
| BS EN 40-6-2002 | 燈柱.鋁燈柱的要求 | Lighting columns - Requirements for aluminium lighting columns |
| BS EN 4001-2007 | 航空航天系列.AL-P2024-T351型鋁合金.改進的化學銑削性能1.6mm≤a≤6mm的鍍鋁薄板材和帶材 | Aerospace series - Aluminium alloy AL-P2024-T351 - Clad sheet and strip with improved chemical milling capability 1,6 mm a 6 mm |
| BS EN 4002-2007 | 航空航天系列.AL-P2219-T81型鋁合金.0.5mm≤a≤6mm的薄板材和帶材 | Aerospace series - Aluminium alloy AL-P2219-T81 - Sheet and strip 0,5 mm ≤ a ≤ 6 mm |
| BS EN 4003-2006 | 航空航天系列.AL-P2219-T87型鋁合金.0.5mm≤a≤6mm的薄板材和帶材 | Aerospace series - Aluminium alloy AL-P2219-T87 - Sheet and strip 0,5 mm a 6 mm |
| BS EN 4004-2007 | 航空航天系列.AL-P3103-H16型鋁合金.薄板材和帶材.0.4mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P3103-H16 - Sheet and strip - 0,4 mm a 6 mm |
| BS EN 4005-2007 | 航空航天系列.AL-P5052-O型鋁合金.薄板材和帶材.0.3mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P5052-O - Sheet and strip 0, 3 mm a 6 mm |
| BS EN 4006-2007 | 航空航天系列.AL-P6082-T4或T42型鋁合金.薄板材和帶材.0.4mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P6082-T4 or T42 - Sheet and strip 0,4 mm a 6 mm |
| BS EN 4007-2005 | 鋁合金AL-P6082-T6或T62.薄板和帶材.0.4 mm≤a≤6 mm | Aerospace series - Aluminium alloy AL-P6082-T6 or T62 - Sheet and strip - 0,4 mm a 6 mm |
| BS EN 4049-003-2006 | 航空航天系列.熱電偶膨脹電纜.工作溫度為65℃～260℃.第003部分:單芯鎳鉻/鎳鋁電纜.產品標準 | Aerospace series - Thermocouple extension cable - Operating temperatures between p 65 °C to 260 °C - Part 003: Single core nickel chromium/nickel aluminium - Product standard |
| BS EN 4049-004-2006 | 航空航天系列.熱電偶膨脹電纜.工作溫度在65℃～260℃之間.第004部分:雙芯鎳鉻/鎳鋁屏蔽電纜和護套電纜.產品 | Aerospace series - Thermocouple extension cable - Operating temperatures between p 65 °C to 260 °C - Part 004: Two core nickel chromium/nickel aluminium shielded and jacketed - Product standard |
| BS EN 4054-2004 | 航空航天系列.管連接件、松套法蘭和密封件.碳氟化合物橡膠密封件和鋁合金保護殼.技術規范 | Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy - Technical specification |
| BS EN 4099-2005 | 鋁合金AL-P2219-T6或T62.覆層薄板和帶材.0.5 mm≤a≤6 mm | Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Clad sheet and strip - 0,5 mm a 6 mm |
| BS EN 4100-2005 | 鋁合金AL-P2219-T6或T62.薄板和帶材.0.5 mm≤a≤6 mm | Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Sheet and strip - 0,5 mm a 6 mm |
| BS EN 4101-2005 | 鋁合金AL-P2024-T4.改進拉伸成形性能的薄板和帶材.0.4 mm≤a≤6 mm | Aerospace series - Aluminium alloy AL-P2024-T4 - Sheet and strip with improved stretch forming capability - 0,4 mm a 6 mm |
| BS EN 4102-2005 | 航空航天系列.AL-P2219-T81型鋁合金.覆層薄板材和帶材.0.5mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P2219-T81 - Clad sheet and strip - 0,5 mm a 6 mm |
| BS EN 4114-2001 | 航空航天系列.帶橡膠襯料的鋁合金環形卡箍("P"型).尺寸和質量 | Aerospace series - Clamps, loop ("P" type) in aluminium alloy with rubber cushioning - Dimensions and masses |
| BS EN 4174-2006 | 航天航空系列.陽極電鍍或鉻酸鹽處理鋁合金2024米制系列、連接模壓鎖緊凹頭緊固件 | Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series |
| BS EN 4176-2005 | 航空航天系列.緊公差TI-P64001鈦合金制陽極電鍍或鋁質有色覆層100°正常或沉頭緊固/凹頭鎖緊螺栓.TI-P99002 | Aerospace series - Lockbolts, 100 ° countersunk normal head or protruding head, tension-/ sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metric series - Technical specification |
| BS EN 4202-2005 | 航空航天系列.AL-P6082-T651型鋁合金.板材.6mm＜a≤25mm | Aerospace series - Aluminium alloy AL-P6082-T651 - Plate - 6 mm a 25 mm |
| BS EN 4203-2005 | 航空航天系列.AL-P8090-T89型鋁合金.薄板材.0.6mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P8090-T89 - Sheet - 0,6 mm a 6 mm |
| BS EN 4204-2005 | 航空航天系列.AL-P8090-T841型鋁合金.薄板材.0.6mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P8090 - T841 - Sheet - 0,6 mm a 6 mm |
| BS EN 4209-2005 | 航空航天系列.AL-P2219-T851型鋁合金.厚板材. 6mm＜a ≤50mm | Aerospace series - Aluminium alloy AL-P2219-T851 - Plate - 6 mm a 50 mm |
| BS EN 4211-2005 | 航空航天系列.AL-P2024-T42型鋁合金.覆層板材.6mm＜a≤25mm | Aerospace series - Aluminium alloy AL-P2024-T42 - Clad plate - 6mm a 25mm |
| BS EN 4212-2005 | 航空航天系列.AL-P5086-H111型鋁合金.板材.6mm＜a≤80mm | Aerospace series - Aluminium alloy AL-P5086-H111 - Plate - 6mm a 8 0mm |
| BS EN 4213-2005 | 航空航天系列.AL-P6061-T651型鋁合金.板材.6mm＜a≤80mm | Aerospace series - Aluminium alloy AL-P6061-T651 - Plate - 6mm a 80mm |
| BS EN 4214-2005 | 航空航天系列.AL-P7010-T651型鋁合金.板材.6mm＜a≤20mm | Aerospace series - Aluminium alloy AL-P7010-T651 - Plate - 6 mm a 20 mm |
| BS EN 4215-2005 | 航空航天系列.AL-P7175-T651型鋁合金.板材.6mm＜a≤80mm | Aerospace series - Aluminium alloy AL-P7175-T651 - Plate - 6 mm a 80 mm |
| BS EN 4247-2005 | 航空航天系列.AL-P2024-T42型鋁合金.板材.6mm＜a≤140mm | Aerospace series - Aluminium alloy AL-P2024-T42 - Plate - 6 mm a 140 mm |
| BS EN 4283-2005 | 航空航天系列.AL-P2219-T87型鋁合金.板材.6mm≤a≤40mm | Aerospace series - Aluminium alloy AL-P2219-T87 - Plate - 6 mm a 40 mm |
| BS EN 4286-2005 | 航空航天系列.AL-P8090-T89型鋁合金.模鍛件.a≤125mm | Aerospace series - Aluminium alloy AL-P8090-T89 - Die forgings - a 125 mm |
| BS EN 4287-2005 | 航天航空系列.AL-P7010型鋁合金.鍛坯件 | Aerospace series - Aluminium alloy AL-P7010 - Forging stock |
| BS EN 4291-2005 | 航空航天系列.鋁合金AL-P8090.鍛造坯料 | Aerospace series - Aluminium alloy AL-P8090 - Forging stock |
| BS EN 4292-2005 | 航空航天系列.鋁合金AL-R39002.鍛造坯料 | Aerospace series - Aluminium alloy AL-R39002 - Forging stock |
| BS EN 4312-2006 | 航空航天系列.帶有鋁涂料涂層的耐熱和耐腐蝕鋼制中等長度螺紋的粗公差異徑柱螺紋.等級:1100MPa(室溫)/315℃ | Aerospace series - Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature) / 315 °C |
| BS EN 4313-2005 | 航空航天系列.AL-P6013-T6型鋁合金.薄板材和帶材.0.5mm≤a≤6mm | Aerospace series - Aluminium aloy AL-P6013-T6 - Sheet and strip - 0,5 mm a 6 mm |
| BS EN 4324-2002 | 航空航天系列.AL-W42201鋁合金.焊接用填充金屬.焊條 | Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding - Rod |
| BS EN 4341-2001 | 航空航天系列.鋁合金AL-W46431.焊接填充金屬.金屬絲和焊條 | Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding - Wire and rod |
| BS EN 4401-2006 | 航空航天系列.緊公差TI-P64001鋁制有色覆層的米制鈦合金桿沉頭、凹頭鎖緊螺栓.分類:1100 MPa / 315 °C（周 | Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C |
| BS EN 4402-2006 | 航空航天系列.TI-P64001鈦合金帶有鋁熱鍍涂層、米制系列、緊公差、剪切型、標稱100°沉頭鎖緊螺栓.等級:110 | Aerospace series - Lockbolts, 100 ° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001,with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C |
| BS EN 4449-2005 | AL-P7050-T76型鋁合金.薄板材.0.8mm≤a≤6mm | Aluminium alloy AL-P7050 - T76 - Sheet - 0,8 mm ≤ a ≤ 6 mm |
| BS EN 4450-2005 | 航空航天系列.AL-P7050-T762型鋁合金.薄板材.0.8mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P7050-T762 - Sheet - 0,8 mm a 6 mm |
| BS EN 4495-2006 | 航空航天系列.米制系列帶有鋁涂料涂層的陽極處理的鈦合金短螺紋緊公差標準桿、標準六角頭螺栓.等級:1100MPa | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C |
| BS EN 4496-2005 | 航空航天系列.有色鋁涂層、陽極化的、鈦合金、短螺紋、緊公差標稱桿、偏位十字凹槽沉頭標稱100 °螺釘.等級 | Aerospace series - Screws, 100 ° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| BS EN 4497-2005 | 航空航天系列.有色鋁涂層、陽極化的、鈦合金、短螺紋、緊公差標稱桿、偏位十字凹槽平頭螺釘.等級:1100MPa( | Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| BS EN 4498-2005 | 航空航天系列.有色鋁涂層、鈍化的、耐熱鎳基合金、中等長度螺紋、緊公差標稱桿、大雙六角頭螺栓.等級:1550M | Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating - Classification: 1 550 MPa (at ambient temperature) / 315 °C |
| BS EN 4501-2006 | 航空航天系列.帶鍍鋁涂層的陽極電鍍鈦合金短螺紋緊公差標準柄正六角頭螺栓、米制系列.等級:1100MPa(室溫)/3 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C |
| BS EN 4509-2006 | 航空航天系列.帶鍍鋁涂層陽極氧化的鈦合金螺紋延伸到螺頭100°沉頭偏置十字凹槽螺釘、米制系列.等級:1100MP | Screws, 100 ° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature)/315 °C |
| BS EN 485-1-2008 | 鋁和鋁合金.薄板材、帶材和厚板材.檢驗和交貨技術條件 | Aluminium and aluminium alloys — Sheet, strip and plate — Part 1: Technical conditions for inspection and delivery |
| BS EN 485-2-2008 | 鋁和鋁合金.薄板材、帶材和厚板材.機械性能 | Aluminium and aluminium alloys - Sheet, strip and plate - Mechanical properties |
| BS EN 485-3-2003 | 鋁和鋁合金.片材、帶材和板材.熱軋制品的形狀和尺寸公差 | Aluminium and aluminium alloys - Sheet, strip and plate - Tolerances on dimensions and form for hot-rolled products |
| BS EN 485-4-1994 | 鋁和鋁合金.薄板材、帶材和板材.冷軋制品的形狀和尺寸公差 | Aluminium and aluminium alloys - Sheet, strip and plate - Tolerances on shape and dimensions for cold-rolled products |
| BS EN 486-1994 | 鋁和鋁合金.擠壓鑄錠.規范 | Aluminium and aluminium alloys - Extrusion ingots - Specifications |
| BS EN 487-1994 | 鋁和鋁合金.滾軋錠.規范 | Aluminium and aluminium alloys - Rolling ingots - Specifications |
| BS EN 50069-1991+A1-1993 | 充氣式高壓開關裝置和控制器用鑄造和鍛造鋁合金的焊接復合封閉物用規范 | Specification for welded composite enclosures of cast and wrought aluminium alloys for gas-filled high- voltage switchgear and controlgear |
| BS EN 50183-2000 | 架空導線.鋁鎂硅合金導線 | Conductors for overhead lines - Aluminium-magnesium-silicon alloy wires |
| BS EN 507-2000 | 金屬屋面板.鋁制全支撐屋頂產品規范 | Roofing products from metal sheet - Specification for fully supported roofing products of aluminium sheet |
| BS EN 508-1-2000 | 金屬制屋面產品.鋼,鋁和不銹鋼薄板材自撐式產品規范.鋼 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Steel |
| BS EN 508-2-2000 | 金屬制屋面產品.鋼,鋁和不銹鋼薄板材自撐式產品規范.鋁 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Aluminium |
| BS EN 508-3-2000 | 金屬制屋面產品.鋼,鋁和不銹鋼薄板材自撐式產品規范.不銹鋼 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Stainless steel |
| BS EN 515-1993 | 鋁和鋁合金.鍛制品.回火標志 | Aluminium and aluminium alloys - Wrought products - Temper designations |
| BS EN 541-2006 | 鋁和鋁合金.金屬罐、密封物和蓋子用軋制品.規范 | Aluminium and aluminium alloys — Rolled products for cans, closures and lids — Specifications |
| BS EN 546-1-2006 | 鋁和鋁合金.箔.第1部分:檢驗和交付用技術條件 | Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery |
| BS EN 546-2-2006 | 鋁和鋁合金.第2部分:箔.機械性能 | Aluminium and aluminium alloys - Part 2: Foil - Mechanical properties |
| BS EN 546-3-2006 | 鋁和鋁合金.箔.第3部分:尺寸公差 | Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions |
| BS EN 546-4-2006 | 鋁和鋁合金.箔.第4部分:特殊性能要求 | Aluminium and aluminium alloys - Foil - Part 4: Special property requirements |
| BS EN 570-2007 | 鋁和鋁合金.鍛造沖擠金屬棒.規范 | Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification |
| BS EN 573-1-2004 | 鋁和鋁合金.鍛制產品化學組成和外形.數字標示系統 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Numerical designation system |
| BS EN 573-2-1995 | 鋁和鋁合金.鍛制產品的化學成分和外形.基于化學標志的命名系統 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Chemical symbol based designation system |
| BS EN 573-3-2007 | 鋁和鋁合金.鍛制品的化學成分和形狀.產品的化學成分和形狀 | Aluminium and aluminium alloys — Chemical composition and form of wrought products — Part 3: Chemical composition and form of products |
| BS EN 573-5-2007 | 鋁和鋁合金.鍛制品的化學成分和形狀.第5部分:標準鍛制品匯編 | Aluminium and aluminium alloys — Chemical composition and form of wrought products — Part 5: Codification of standardized wrought products |
| BS EN 575-1996 | 鋁和鋁合金.熔鑄母合金.規范 | Aluminium and aluminium alloys - Master alloys produced by melting - Specifications |
| BS EN 576-2003 | 鋁和鋁合金.再熔非合金鋁錠.規范 | Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications |
| BS EN 577-1996 | 鋁和鋁合金.液體金屬.規范 | Aluminium and aluminium alloys - Liquid metal - Specifications |
| BS EN 586-1-1998 | 鋁和鋁合金.鍛件.檢驗和交付技術狀態 | Aluminium and aluminium alloys - Forgings - Technical conditions for inspection and delivery |
| BS EN 586-2-1994 | 鋁和鋁合金.鍛件.機械特性和附加特性要求 | Aluminium and aluminium alloys - Forgings - Mechanical properties and additional property requirements |
| BS EN 586-3-2002 | 鋁和鋁合金.鍛件.尺寸和形狀公差 | Aluminium and aluminium alloys - Forgings - Tolerances on dimensions and form |
| BS EN 601-2004 | 鋁和鋁合金.鑄件.與食品接觸用鑄件的化學成分 | Aluminum and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff |
| BS EN 602-2004 | 鋁和鋁合金.鍛件.與食品接觸的產品制造用半成品的化學成分 | Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff |
| BS EN 603-1-1997 | 鋁及鋁合金.鍛坯.檢驗和交付技術狀態 | Aluminium and aluminium alloys - Wrought forging stock - Technical conditions for inspection and delivery |
| BS EN 603-2-1997 | 鋁及鋁合金.鍛坯.機械性能 | Aluminium and aluminium alloys - Wrought forging stock - Mechanical properties |
| BS EN 603-3-2000 | 鋁及鋁合金.鍛坯.尺寸和形狀公差 | Aluminium and aluminium alloys - Wrought forging stock - Tolerances on dimensions and form |
| BS EN 60317-0-3-2008 | 特殊型繞組線規范.通用要求.漆包圓鋁線 | Specifications for particular types of winding wires - General requirements - Enamelled round aluminium wire |
| BS EN 60317-15-2004 | 特種繞組線規范.聚酯酰亞胺漆包圓鋁線(180級) | Specifications for particular types of winding wires - Polyesterimide enamelled round aluminium wire, class 180 |
| BS EN 60317-25-1993 | 特種繞線規范.200級涂覆有聚酯或聚酰胺酯的聚酰胺－酰亞胺漆包圓鋁線 | Specifications for particular types of winding wires - Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 |
| BS EN 60384-18-2-2007 | 電子設備用固定電容器.空白詳細規范.帶非固體電解質的鋁電解表面安裝固定電容器.評定等級EZ | Fixed capacitors for use in electronic equipment - Blank detail specification - Fixed aluminium electrolytic surface mount capacitors with non-solid electrolyte - Assessment level EZ |
| BS EN 60384-25-1-2006 | 電子設備用固定電容器.空白詳細規范.帶導電聚合固體電解質的表面安裝固定鋁電解電容器.評定級EZ | Fixed capacitors for use in electronic equipment - Blank detail specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ |
| BS EN 60384-25-2006 | 電子設備用固定電容器.分規范.帶導電聚合固體電解質的表面安裝固定鋁電解電容器 | Fixed capacitors for use in electronic equipment - Sectional specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte |
| BS EN 60384-4-1-2007 | 電子設備用固定電容器.空白詳細規范.帶非固體電解質的鋁電解固定電容器.評估等級EZ | Fixed capacitors for use in electronic equipment - Part 4-1: Blank detail specification — Fixed aluminium electrolytic capacitors with non-solid electrolyte — Assessment level EZ |
| BS EN 60384-4-2-2007 | 電子設備用固定電容器.空白詳細規范.固體(MnO2)電解質的鋁電解固定電容器.評估等級EZ | Fixed capacitors for use in electronic equipment — Part 4-2: Blank detail specification — Fixed aluminium electrolytic capacitors with solid (MnO2) electrolyte — Assessment level EZ |
| BS EN 60384-4-2007 | 電子設備用固定電容器.第4部分:分規范.采用固體二氧化錳(MnO2)和非固體電解質的鋁電解電容器 | Fixed capacitors for use in electronic equipment - Part 4: Sectional specification — Aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte |
| BS EN 604-1-1997 | 鋁及鋁合金.鑄鍛件坯.檢查和交付技術狀態 | Aluminium and aluminium alloys - Cast forging stock - Technical conditions for inspection and delivery |
| BS EN 604-2-1997 | 鋁及鋁合金.鑄鍛件坯.尺寸和形位公差 | Aluminium and aluminium alloys - Cast forging stock - Tolerances on dimensions and form |
| BS EN 60889-1997 | 架空線導線用硬拉制鋁線 | Hard drawn aluminium wire for overhead line conductors |
| BS EN 61232-1997 | 電氣用包鋁鋼絲 | Aluminium-clad steel wires for electrical purposes |
| BS EN 683-1-2006 | 鋁和鋁合金.葉片坯料.第1部分:檢驗和交付技術條件 | Aluminium and aluminium alloys. Finstock. Part 1: Technical conditions for inspection and delivery |
| BS EN 683-2-2006 | 鋁和鋁合金.散熱片坯料.第2部分:機械特性 | Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties |
| BS EN 683-3-2006 | 鋁和鋁合金.散熱片坯料.第3部分:尺寸和形狀公差 | Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form |
| BS EN 725-1-2007 | 高級工業陶瓷.陶瓷粉末的試驗方法.第1部分:氧化鋁中雜質的測定 | Advanced technical ceramics — Methods of test for ceramic powders — Part 1: Determination of impurities in alumina |
| BS EN 725-4-2006 | 高級工業陶瓷.陶瓷粉末試驗方法.用X射線熒光光譜(XRF)分析法測定氮化鋁中氧含量 | Advanced technical ceramics - Methods of test for ceramic powders - Determination of oxygen content in aluminium nitride by XRF analysis |
| BS EN 754-1-2008 | 鋁和鋁合金.冷拉桿材/棒材和管材.檢驗和交貨用技術條件 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Technical conditions for inspection and delivery |
| BS EN 754-2-2008 | 鋁和鋁合金.冷拉桿材/棒材和管材.機械特性 | Aluminium and aluminium alloys — Cold drawn rod/bar and tube — Part 2: Mechanical properties |
| BS EN 754-3-2008 | 鋁和鋁合金.冷拉桿材/棒材和管材.圓棒材的尺寸和形狀公差 | Aluminium and aluminium alloys — Cold drawn rod/bar and tube — Part 3: Round bars, tolerances on dimensions and form |
| BS EN 754-4-2008 | 鋁和鋁合金.冷拉桿材/棒材和管材.方棒材的尺寸和形狀公差 | Aluminium and aluminium alloys — Cold drawn rod/bar and tube — Part 4: Square bars, tolerances on dimensions and form |
| BS EN 754-5-2008 | 鋁和鋁合金.冷拉桿材/棒材和管材.矩形棒材尺寸和形狀公差 | Aluminium and aluminium alloys — Cold drawn rod/bar and tube — Part 5: Rectangular bars, tolerances on dimensions and form |
| BS EN 754-6-2008 | 鋁和鋁合金.冷拉桿材/棒材和管材.六角形棒材的尺寸和形狀公差 | Aluminium and aluminium alloys — Cold drawn rod/bar and tube — Part 6: Hexagonal bars, tolerances on dimensions and form |
| BS EN 754-7-2008 | 鋁和鋁合金.冷拉桿材/棒材和管材.無縫管尺寸和形狀公差 | Aluminium and aluminium alloys — Cold drawn rod/bar and tube — Part 7: Seamless tubes, tolerances on dimensions and form |
| BS EN 754-8-2008 | 鋁和鋁合金.冷拉桿材/棒材和管材.出水孔管材尺寸和形狀公差 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Porthole tubes, tolerances on dimensions and form |
| BS EN 755-1-2008 | 鋁和鋁合金.擠壓桿材/棒材、管材和型材.檢驗和交貨技術條件 | Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 1: Technical conditions for inspection and delivery |
| BS EN 755-2-2008 | 鋁和鋁合金.擠壓桿材/棒材、管材和型材.機械性能 | Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 2: Mechanical properties |
| BS EN 755-3-2008 | 鋁和鋁合金.擠壓桿材/棒材、管材和型材.圓棒材的尺寸和形狀公差 | Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 3: Round bars, tolerances on dimensions and form |
| BS EN 755-4-2008 | 鋁和鋁合金.擠壓的桿材/棒材、管材和型材.方棒材的尺寸和形狀公差 | Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 4: Square bars, tolerances on dimensions and form |
| BS EN 755-5-2008 | 鋁和鋁合金.擠壓的桿材/棒材、管材和型材.矩形棒材的尺寸和形狀公差 | Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 5: Rectangular bars, tolerances on dimensions and form |
| BS EN 755-6-2008 | 鋁和鋁合金.擠壓的桿材/棒材、管材和型材.六角形棒材的尺寸和形狀公差 | Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 6: Hexagonal bars, tolerances on dimensions and form |
| BS EN 755-7-2008 | 鋁和鋁合金.擠壓的桿材/棒材、管材和型材.無縫管的尺寸和形狀公差 | Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 7: Seamless tubes, tolerances on dimensions and form |
| BS EN 755-8-2008 | 鋁和鋁合金.擠壓的桿材/棒材、管材和型材.出水孔管的尺寸和形狀公差 | Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 8: Porthole tubes, tolerances on dimensions and form |
| BS EN 755-9-2008 | 鋁和鋁合金.擠壓桿材/棒材、管材及型材.型材的尺寸和形狀公差 | Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles — Part 9: Profiles, tolerances on dimensions and form |
| BS EN 851-1996 | 鋁和鋁合金.鍛制品.烹調器具用圓形材料和圓坯料規范 | Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications |
| BS EN 878-2004 | 人類生活用水處理用化學試劑.硫酸鋁 | Chemicals used for treatment of water intended for human consumption - Aluminium sulfate |
| BS EN 881-2004 | 人類用水處理的化學試劑.氯化鋁(單體)、羥基氯化鋁(單體)和羥基硫酸鹽氯化鋁(單體) | Chemicals used for treatment of water intended for human consumption - Aluminium chloride (monomeric), aluminium chloride hydroxide (monomeric) and aluminium chloride hydroxide sulfate (monomeric) |
| BS EN 882-2004 | 人類用水處理的化學試劑.鋁酸鈉 | Chemicals used for treatment of water intended for human consumption - Sodium aluminate |
| BS EN 883-2004 | 人類用水處理的化學試劑.聚羥基氯化鋁和聚羥基硫酸鹽氯化鋁 | Chemicals used for treatment of water intended for human consumption - Polyaluminium chloride hydroxide and polyaluminium chloride hydroxide sulfate |
| BS EN 885-2004 | 人類用水處理的化學試劑.聚羥基硅酸鹽氯化鋁 | Chemicals used for treatment of water intended for human consumption - Polyaluminium chloride hydroxide silicate |
| BS EN 886-2004 | 人類用水處理的化學試劑.聚羥基硅酸鹽硫酸鋁 | Chemicals used for treatment of water intended for human consumption - Polyaluminium hydroxide silicate sulfate |
| BS EN 887-2004 | 人類用水處理的化學試劑.硫酸鋁鐵(III) | Chemicals used for treatment of water intended for human consumption - Aluminium iron (III) sulfate |
| BS EN 935-2004 | 人類用水處理的化學試劑.氯化鋁鐵(III)(單體)和羥基氯化鋁鐵(III)(單體) | Chemicals used for treatment of water intended for human consumption - Aluminium iron(III) chloride (monomeric) and aluminium iron(III) chloride hydroxide (monomeric) |
| BS EN 941-1996 | 鋁和鋁合金.圓形材料和圓坯料的通用要求.規范 | Aluminium and aluminium alloys - Circle and circle stock for general applications - Specifications |
| BS EN ISO 10042-2006 | 焊接.鋁和鋁合金弧焊接頭.缺陷質量分級 | Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections |
| BS EN ISO 10081-1-2003 | 致密成型耐火產品的分類.硅酸鋁 | Classification of dense shaped refractory products - Alumina-silica |
| BS EN ISO 105-X01-1996 | 紡織品.色牢度試驗.第X01部分:耐碳化色牢度.氯化鋁法 | Textiles - Tests for colour fastness - Colour fastness to carbonizing: Aluminium chloride |
| BS EN ISO 11126-10-2000 | 涂裝油漆和有關產品前鋼材預處理.噴射清理用非金屬磨料規范.鐵鋁石榴石 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Almandite garnet |
| BS EN ISO 11126-7-2001 | 涂料和相關制品使用前鋼襯底的制備.非金屬噴砂清理磨料的規范.熔融氧化鋁規范 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Specification for fused aluminium oxide |
| BS EN ISO 11846-1996 | 金屬和合金的腐蝕.溶解熱處理鋁合金抗粒間腐蝕的測定 | Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat- treatable aluminium alloys |
| BS EN ISO 12020-2000 | 水的質量.鋁的測定.原子吸收光譜法 | Water quality - Determination of aluminium - Atomic absorption spectrometric methods |
| BS EN ISO 12215-3-2002 | 小艇.船體構造和船材尺寸.材料.鋼、鋁合金、木材及其它材料 | Small craft - Hull construction and scantlings - Materials - Steel, aluminium alloys, wood, other materials |
| BS EN ISO 13919-2-2001 | 焊接.電子和激光束焊接接頭.缺陷的質量分級指南.鋁及其可焊合金 | Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Aluminium and its weldable alloys |
| BS EN ISO 14713-1999 | 鐵和鋼結構的防腐.鋅和鋁涂層.指南 | Protection against corrosion of iron and steel in structures - Zinc and aluminium coatings - Guidelines |
| BS EN ISO 15329-2006 | 金屬和合金的腐蝕.可熱處理的鋁合金粒間腐蝕敏感性的評估用陽極試驗 | Corrosion of metals and alloys - Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys |
| BS EN ISO 15546-2007 | 石油和天然氣工業.鋁合金鉆桿 | Petroleum and natural gas industries - Aluminium alloy drill pipe |
| BS EN ISO 15547-2-2005 | 石油、石化和天然氣工業.板式熱交換器.銅焊鋁板熱交換器 | Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Brazed aluminium plate-fin heat exchangers |
| BS EN ISO 15614-2-2005 | 金屬材料焊接過程的規范和鑒定.焊接過程試驗.鋁及其合金的電弧焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Arc welding of aluminium and its alloys |
| BS EN ISO 15614-4-2005 | 金屬材料焊接過程的規范和鑒定.焊接過程試驗.鋁鑄件的精焊接 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Finishing welding of aluminium castings |
| BS EN ISO 18273-2004 | 焊接消耗品.鋁和鋁合金焊接用絲狀電極、焊絲和焊條.分類 | Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification |
| BS EN ISO 18594-2007 | 電阻點焊、凸焊和縫隙焊接.測定鋁和鋼材料躍遷電阻的方法 | Resistance spot-, projection- and seam-welding - Method for determining the transition resistance on aluminium and steel material |
| BS EN ISO 18595-2007 | 電阻焊接.鋁和鋁合金的點焊.可焊性、焊接和測試 | Resistance welding - Spot welding of aluminium and aluminium alloys - Weldability, welding and testing |
| BS EN ISO 2063-2005 | 熱噴鍍.金屬和其他無機覆層.鋅、鋁及其合金 | Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys |
| BS EN ISO 21587-1-2007 | 硅酸鋁耐熔制品的化學分析(可選擇X射線熒光法).儀器、試劑、硅石的分解和重量測定 | Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Apparatus, reagents, dissolution and gravimetric silica |
| BS EN ISO 21587-2-2007 | 硅酸鋁耐熔制品的化學分析(可選擇X射線熒光法).濕化學分析 | Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Wet chemical analysis |
| BS EN ISO 21587-3-2007 | 硅酸鋁耐熔制品的化學分析(可選擇X射線熒光法).感應耦合等離子體和原子吸收光譜測定法 | Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Inductively coupled plasma and atomic absorption spectrometry methods |
| BS EN ISO 3262-16-2000 | 油漆調和料.規范和試驗方法.氫氧化鋁 | Extenders for paints - Specifications and methods of test - Aluminium hydroxides |
| BS EN ISO 3262-18-2000 | 涂料填充劑.規范和試驗方法.沉淀硅鋁酸鈉 | Extenders for paints - Specifications and methods of test - Precipitated sodium aluminium silicate |
| BS EN ISO 3613-2001 | 鋅,鎘,鋁-鋅合金和鋅鋁合金的鉻酸鹽轉化鍍層.試驗方法 | Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods |
| BS EN ISO 4623-2-2004 | 色漆和清漆.耐絲狀腐蝕的測定.鋁襯底 | Paints and varnishes - Determination of resistance to filiform corrosion - Aluminium substrates |
| BS EN ISO 8362-3-2003 | 注射液容器及附件.注射小瓶用的鋁蓋 | Injection containers and accessories - Aluminium caps for injection vials |
| BS EN ISO 8536-3-1999 | 醫用輸液設備.輸液瓶的鋁制瓶蓋 | Infusion equipment for medical use - Aluminium caps for infusion bottles |
| BS EN ISO 8872-2003 | 輸血、輸液及注射瓶的鋁蓋.一般要求和試驗方法 | Aluminium caps for transfusion, infusion and injection bottles - General requirements and test methods |
| BS EN ISO 9606-2-2004 | 焊工的認可試驗.熔焊.鋁和鋁合金 | Qualification test of welders - Fusion welding - Aluminium and aluminium alloys |
| BS EN ISO 9692-3-2001 | 焊接和相關工藝.接頭的準備.鋁及其合金的金屬極惰性氣體保護焊和鎢極惰性氣體保護焊 | Welding and allied processes - Joint preparation - Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys |
| BS F 139-1989 | 航空航天用滲鋁聚氯丁橡膠的尼龍織物(350g/m**2)規范 | Specification for aluminized polychloroprene rubber-coated nylon fabric (350 g/m2) for aerospace purposes |
| BS G 184 to G 188-1964 | 航空用六角形壓合鋁制電纜的鋁接線板端頭和嵌入式連接器規范 | Specification for aluminium terminal ends and in-line connectors for hexagonal crimping to aircraft aluminium electrical cables |
| BS HC 502-1981 | 銅基鋁-鎳-鐵合金鑄件規范(620MPa)(鋁9.5、鎳5、鐵5) | Specification for copper base aluminium-nickel-iron alloy castings (620 MPa) (Al 9.5, Ni 5, Fe 5) |
| BS HR 10-1972 | 鎳-鈷-鉻-鉬-鈦-鋁耐合金坯錠、棒材、鍛件和零件(鎳基、Co20、Cr20、Mo5.9、Ti2.1、Al0.5)規范 | Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) |
| BS HR 206-1973 | 鎳-鈷-鉻-鉬-鈦-鋁耐熱合金板材、薄板材和帶材(鎳基、Co20、Cr20、Mo5.9、Ti2.1、Al0.5)規范 | Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) |
| BS HR 207-1973 | 鎳-鐵-鉻-鉬-鋁-鈦耐熱合金板材、薄板材和帶材(Ni/Co43.5、Cr16.5、Mo3.3、Al1.2、Ti1.2、Fe余量)規范 | Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder) |
| BS HR 209-1989 | 鎳-鉻-鈷-鉬-鈦-鋁耐熱合金薄板材、帶材和板材:軟化的(鎳基、Cr18、Co14、 Mo7、Ti2.2、Al2.1)規范 | Specification for nickel-chromium-cobalt-molybdenum-titanium-aluminium heat-resisting alloy sheet, strip and plate: softened (nickel base, Cr 18, Co 14, Mo 7, Ti 2.2, Al 2.1) |
| BS HR 3-1972 | 鎳-鈷-鉻-鉬-鈦-鋁耐熱合金坯錠、棒材、鍛件和部件規范(鎳基、Co20、Cr14.8、Mo05、Al4.7、Ti1.2) | Specification for nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14. 8, Mo 5, Al 4.7, Ti 1.2) |
| BS HR 4-1972 | 鎳-鉻-鈷-鋁-鉬-鈦耐熱合金坯錠、棒材、鍛件和部件規范(鎳基Cr 15、Co 14.2、Al 5、Mo 4、Ti 4) | Specification for nickel-chromium-cobalt-aluminium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 15, Co 14. 2, Al 5, Mo 4, Ti 4) |
| BS HR 402-1973 | 冷加工和軟化的無縫鎳鉻鈷鈦鋁耐熱合金管(鎳基、Cr19.5、Co18.0、Ti2.5、Al1.5)規范 | Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold worked and softened seamless tubes (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
| BS HR 404-1973 | 冷加工溶液處理的無縫鎳鈷鉻鉬鈦鋁耐熱合金管(鎳基、Co20、Cr20、Mo5.9、Ti2.1、Al0.5)規范 | Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy cold worked solution treated seamless tubes (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) |
| BS HR 505-1981 | 螺紋墊圈(最大直徑2mm)用鎳鉻鐵鈦鈮鋁耐熱合金圓線材(鎳基、Cr15.5、Fe7.0、Ti2.5、N6/Ta0.95、Al0.70)規范 | Specification for nickel-chromium-iron-titanium-niobium-aluminium heat-resisting alloy round wire for thread inserts (maximum diameter 2 mm) (nickel base, Cr 15.5, Fe 7.0, Ti 2.5, Nb/Ta 0.95, Al 0.70) |
| BS HR 506-1989 | 鎳-鉻-鈷-鈦-鋁耐熱合金線材:軟化的(鎳基、Cr19.5、Co1.8、Ti2.5、Al1.5)規范 | Nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire: softened (Nickel base, Cr 19.5, Co 18, Ti 2.5, Al 1.5) |
| BS HR 55-1980 | 鎳-鐵-鉻-鉬-鋁-鈦耐熱合金坯錠、棒材、鍛件和部件規范(Ni/Co43.5、Cr16.5、Mo3.3、 Al1.2、Ti1.2、剩余Fe) | Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 43.5, Cr 16.5, Mo 3. 3, Al 1.2, Ti 1.2, Fe remainder) |
| BS ISO 10081-1-2003 | 致密定型耐火制品的分類.硅酸鋁 | Classification of dense shaped refractory products - Alumina-silica |
| BS ISO 11846-1996 | 金屬和合金的腐蝕.可溶液熱處理的鋁合金抗顆粒間腐蝕的測定 | Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys |
| BS ISO 12103-2-1998 | 道路車輛.過濾器評估用試驗粉塵.氧化鋁試驗粉塵 | Road vehicles - Test dust for filter evaluation - Aluminium oxide test dust |
| BS ISO 12986-2-2005 | 鋁生產用碳素材料.預焙陽極和陰極碳塊.用四點法測定抗彎強度 | Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Determination of flexural strength by the four-point method |
| BS ISO 12987-2005 | 鋁制品用碳質材料.陽極、陰極塊、側壁磚和烤灌糊.使用比較法測定熱傳導性 | Carbonaceous materials for the production of aluminium - Anodes, cathodes blocks, sidewall blocks and baked ramming pastes - Determination of the thermal conductivity using a comparative method |
| BS ISO 12988-2-2004 | 鋁生產用含碳材料.焙燒陽極.對二氧化碳反應性的測定.熱解重量分析法 | Carbonaceous materials used in the production of aluminium - Baked anodes - Determination of the reactivity to carbon dioxide - Thermogravimetric method |
| BS ISO 12989-2-2005 | 鋁生產用碳素材料.焙燒陽極和側壁塊.空氣反應性的測定.熱重分析法 | Carbonaceous materials used in the production of aluminium - Baked anodes and sidewall blocks - Determination of the reactivity to air - Thermogravimetric method |
| BS ISO 13804-2000 | 鋁用釉瓷和搪瓷.試件的制備 | Vitreous and porcelain enamels for aluminium - Production of specimens for testing |
| BS ISO 13805-2000 | 鋁用釉瓷和搪瓷.在電解溶液的作用下鋁與搪瓷粘合性的測定. | Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test) |
| BS ISO 14420-2005 | 鋁生產用含碳產品.焙燒陽極和成形碳產品.線性熱膨脹系數的測定 | Carbonaceous products for the production of aluminium - Baked anodes and shaped carbon products - Determination of the coefficient of linear thermal expansion |
| BS ISO 14427-2004 | 鋁生產用含碳材料.冷和微熱搗實糊料.非烤試驗樣品的制備和壓實后表觀密度的測定 | Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Preparation of unbaked test specimens and determination of apparent density after compaction |
| BS ISO 14428-2004 | 鋁生產用含碳材料.冷和微溫沖壓漿料.烘烤時的膨脹/收縮 | Carbonaceous materials for the production of aluminium - Cold and tepid ramming pastes - Expansion/shrinkage during baking |
| BS ISO 14435-2006 | 鋁生產用含碳材料.石油焦.用感應耦合等離子體原子發射光譜測定法測定痕量金屬 | Carbonaceous materials for the production of aluminium - Petroleum coke - Determination of trace metals by inductively coupled plasma atomic emission spectrometry |
| BS ISO 14788-2005 | 連續熱浸鍍鋅5%鋁合金涂層鋼薄板 | Continuous hot-dip zinc-5% aluminium alloy coated steel sheet |
| BS ISO 15329-2006 | 金屬和合金的腐蝕.熱處理鋁合金的粒間腐蝕易感性評價的陽極試驗 | Corrosion of metals and alloys - Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys |
| BS ISO 15379-1-2004 | 鋁生產用含碳材料.陰極塊材料.壓力作用下由于鈉滲透引起的膨脹的測定 | Carbonaceous materials for the production of aluminium - Cathode block materials - Determination of the expansion due to sodium penetration with application of pressure |
| BS ISO 15379-2-2004 | 鋁生產用碳質材料.陰極塊材料.無壓力作用下由于鈉滲透引起的膨脹的測定 | Carbonaceous materials for the production of aluminium - Cathode block materials - Determination of the expansion due to sodium penetration without application of pressure |
| BS ISO 15906-2007 | 鋁生產用碳素材料.焙燒陽極.透氣率測定 | Carbonaceous materials for the production of aluminium - Baked anodes - Determination of the air permeability |
| BS ISO 17499-2006 | 鋁生產用碳質材料.測定用等效溫度表示的烘烤等級 | Carbonaceous materials used in the production of aluminium - Determination of baking level expressed by equivalent temperature |
| BS ISO 17500-2006 | 原鋁生產用氧化鋁.磨損指數測定 | Aluminium oxide used for the production of primary aluminium - Determination of attrition index |
| BS ISO 17544-2004 | 鋁生產用含碳材料.冷和微熱搗實糊料.非烤糊料的可壓實性測定 | Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Determination of rammability of unbaked pastes |
| BS ISO 17615-2007 | 鋁和鋁合金.重熔用合金鑄錠.規范 | Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications |
| BS ISO 18515-2007 | 鋁生產用碳素材料.陰極塊和焙燒陽極.耐壓強度測定 | Carbonaceous materials for the production of aluminium - Cathode blocks and baked anodes - Determination of compressive strength |
| BS ISO 20202-2004 | 鋁生產用含碳材料.冷和微熱搗實糊料.焙燒試樣的制備和焙烤時損失的測定 | Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Preparation of baked test pieces and determination of loss on baking |
| BS ISO 20203-2006 | 鋁生產用碳素材料.煅燒焦炭.用X射線衍射法測定煅燒石油焦炭的晶體粒度 | Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of crystallite size of calcined petroleum coke by X-ray diffraction |
| BS ISO 20703-2007 | 儲氣瓶.可再填充的焊接鋁合金氣瓶.設計、結構和試驗 | Gas cylinders - Refillable welded aluminium-alloy cylinders - Design, construction and testing |
| BS ISO 209-2007 | 鋁和鋁合金.化學成分 | Aluminium and aluminium alloys - Chemical composition |
| BS ISO 21687-2007 | 鋁生產用含碳材料.以氮作為分析氣體的氣體比重測量法(測定體積的)測定密度.固體材料 | Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials |
| BS ISO 22779-2006 | 金屬鍍層.物理蒸發沉淀鋁鍍層.規范和試驗方法 | Metallic coatings - Physical vapour-deposited coatings of aluminium - Specification and test methods |
| BS ISO 23202-2007 | 鋁生產用氧化鋁.測定通過20μm篩孔粒子 | Aluminium oxide used for the production of aluminium - Determination of particles passing a 20 micrometre aperture sieve |
| BS ISO 2926-2005 | 主要用于鋁生產的氧化鋁.45 μm至150 μm范圍內的粒度分析.電刻篩分法 | Aluminium oxide used for the production of primary aluminium - Particle size analysis for the range 45 ?m to 150 ?m - Method using electroformed sieves |
| BS ISO 3620-1995 | 攝影技術.洗片化學制品.硫酸鋁鉀規范 | Photography - Processing chemicals - Specifications for aluminium potassium sulfate |
| BS ISO 4688-1-2006 | 鐵礦石.鋁的測定.火焰原子吸收光譜測量法 | Iron ores - Determination of aluminium - Flame atomic absorption spectrometric method |
| BS ISO 5832-14-2009 | 外科植入物.金屬材料.鍛造鈦15-鉬5-鋯3-鋁合金 | Implants for surgery - Metallic materials - Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy |
| BS ISO 5940-2-2007 | 鋁生產用碳素材料.電極用硬瀝青.軟化點的測定(梅特勒軟化點法) | Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of the softening point (Mettler softening point method) |
| BS ISO 8005-2006 | 鋁生產用碳素材料.生焦炭和煅燒焦炭.灰分含量的測定 | Carbonaceous materials used in the production of aluminium - Green and calcined coke - Determination of ash content |
| BS ISO 8007-3-2005 | 鋁生產用碳素材料.單個材料的取樣方案和取樣.側壁塊 | Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Sidewall blocks |
| BS ISO 8008-2006 | 主要用于鋁生產的氧化鋁.用氮吸收法測定表面吸附指數 | Aluminium oxide primarily used for the production of aluminium - Determination of specific surface area by nitrogen adsorption |
| BS ISO 806-2004 | 主要用于鋁生產的氧化鋁.在300鳦和1000鳦時質量損失的測定 | Aluminium oxide primarily used for the production of aluminium - Determination of loss of mass at 300 ?C and 1 000 ?C |
| BS ISO 9285-1997 | 磨料顆粒和粗料.熔化氧化鋁的化學分析 | Abrasive grains and crude - Chemical analysis of fused aluminium oxide |
| BS L 103-1971 | 鋁-銅-鎂-硅-錳合金(室溫溶解處理和老化)鍛坯和鍛件規范(Cu 4.4、Mg 0.5、Si 0.7、Mn 0.8) | Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0. 8) |
| BS L 105-1971 | 鋁-銅(4.4)-鎂(0.5)-硅(0.7)-錳(0.8)合金管材規范(固溶處理和室溫效)(壁厚度小于10mm) | Specification for tube of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) |
| BS L 109-1971 | 鋁-銅(4.4)-鎂(1.5)-錳(0.6)合金鋁涂層薄板和帶材規范(溶液處理和室溫時效) | Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6) |
| BS L 110-1971 | 鋁-銅(4.4)-鎂(1.5)-錳(0.6)合金鋁涂層薄板材和帶材規范(由用戶進行溶液處理) | Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy (supplied for solution treatment by the user) (Cu 4.4, Mg 1.5, Mn 0.6) |
| BS L 112-1971 | 鋁-鎂(0.8)-硅(1)-錳(0.7)合金鍛坯和鍛件規范(溶液處理和沉淀處理)(適用于焊接) | Specification for forging stock and forgings of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) |
| BS L 113-1971 | 鋁-鎂(0.8)-硅(1)-錳(0.7)合金薄板材和帶材規范(溶液處理和沉淀處理)(適用于焊接) | Specification for sheet and strip of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) |
| BS L 114-1971 | 鋁-鎂(0.8)硅(1)-錳(0.7)合金管規范(溶液處理和沉淀處理)(壁厚度小于10mm)(適用于焊接) | Specification for tube of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (not exceeding 10 mm wall thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) |
| BS L 115-1971 | 鋁-鎂(0.8)硅(1)-錳(0.7)合金板規范(溶液處理,拉伸控制及沉淀處理)(厚度小于25mm)(適用于焊接) | Specification for plate of aluminium-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (not exceeding 25 mm thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7) |
| BS L 117-1975 | 鋁-鎂(1.0)-硅(0.6)-銅(0.28)-鉻(0.2)合金管規范(溶液處理和人工時效:未經液壓試驗)(厚度小于10mm) | Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: not tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2) |
| BS L 118-1975 | 鋁-鎂(1.0)-硅(0.6)-銅(0.28)-鉻(0.2)合金管規范(溶液處理和人工時效:液壓試驗)(壁厚度小于10mm) | Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2) |
| BS L 119-1975 | 鋁-銅(5.0)-鎳(1.5)-錳(0.5)-鈦(0.2)-鋯(0.2)-鈷(0.2)-銻(0.2)合金鑄錠和鑄件規范(溶液處理和人工時效) | Specification for ingots and castings of aluminium-copper-nickel-manganese-titanium-zirconium-cobalt-antimony alloy (solution treated and artificially aged) (Cu 5.0, Ni 1.5, Mn 0.25, Ti 0.2, Zr 0.2, Co 0.2, Sb 0.2) |
| BS L 154-1977 | 鋁-銅(4)-硅(1)合金鑄錠和鑄件規范(溶液處理和室溫時效) | Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and aged at room temperature) (Cu 4, Si 1) |
| BS L 155-1977 | 鋁-銅(4)-硅(1)合金鑄錠和鑄件規范(溶液處理和人工時效) | Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and artificially aged) (Cu 4, Si 1) |
| BS L 158-1978 | 鋁-銅-鎂-硅-錳合金(室溫溶解處理和老化)緊公差薄板材和帶材規范(Cu 4.4、Mg 0.5、Si 0.8、Mn 0.8) | Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0. 8) |
| BS L 159-1978 | 鋁-銅(4.4)-鎂(0.5)-硅(0.8)-錳(0.8)合金緊公差薄板材和帶材規范(溶液處理和人工時效) | Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) |
| BS L 161-1976 | 規范.鋁-鋅(5.6)-鎂(2.5)-銅(1.6)-鋯(0.22)合金手工鍛件和模壓鍛件(溶液處理和人工時效至過老化條件) | Specification - Hand and die forgings of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22) |
| BS L 162-1976 | 規范.鋁-鋅(5.6)-鎂(2.5)-銅(1.6)-鉻(0.22)合金冷壓手工鍛件(溶液處理和人工時效至過老化條件) | Specification - Cold compressed hand forgings of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22) |
| BS L 163-1978 | 鋁涂層鋁-銅-鎂-硅-錳合金薄板材和帶材規范(溶液處理、冷加工壓平和室溫老化)(Cu 4.4、Mg 0.5、Si 0.8、Mn | Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated, cold worked for flattening and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) |
| BS L 164-1978 | 鋁涂層的鋁-銅-鎂-硅-錳合金(室溫溶解處理和老化)薄板材和帶材規范(Cu 4.4、Mg 0.5、Si 0.8、Mn 0.8) | Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0. 8) |
| BS L 165-1978 | 鋁涂層鋁-銅(4.4)-鎂(0.5)-硅(0.8)-錳(0.8)合金薄板材和帶材規范(固溶處理和人工時效的) | Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) |
| BS L 166-1978 | 鋁涂層鋁-銅(4.4)-鎂(0.5)-硅(0.8)-錳(0.8)合金緊公差薄板材和帶材規范(溶液處理和室溫時效) | Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) |
| BS L 167-1978 | 鋁-鍍鋁-銅(4.4)-鎂(0.5)-硅(0.8)-錳合金緊公差薄板材和帶材規范(固溶處理和人工時效的) | Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) |
| BS L 168-1978 | 鋁-銅(4.4)-鎂(0.5)-硅(0.7)-錳(0.8)合金棒材和擠壓型材規范(固溶處理和人工時效)(直徑不超過200mm或較小的 | Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) |
| BS L 170-1989 | 鋁-鋅-銅-鉻合金擠壓棒材和型材用規范(溶解處理、受控拉伸和人工時效)(直徑或較小截面尺寸小于150mm)(Zn 5. | Specification for extruded bars and sections of aluminium-zinc-copper-chromium alloy (solution treated, controlled stretched and artificially aged) (not exceeding 150 mm diameter or minor sectional dimension) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.23) (7075) |
| BS L 171-1990 | 鋁-鋅(5.7)-鎂(2.5)-錳(0.5)-銅(0.5)合金鍛件規范(鍛件或經過退火隨后熱處理鍛件)(直徑或較小截面尺寸小于1 | Specification for forging of aluminium-zinc-magnesium-manganese-copper alloy (supplied as-forged or annealed for subsequent heat treatment) (not exceeding 150 mm diameter or minor sectional dimension) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5) (7014) |
| BS L 172-1989 | 鋁-鋅-鎂-錳-銅合金擠壓、軋制或鑄鍛坯用規范(BS L 171鍛件制造用)(Zn5.7、Mg2.7、Mn0.5、Cu0.5)(7014) | Specification for extruded, rolled or cast forging stock of aluminium-zinc-magnesium-manganese-copper alloy (for manufacture of forgings to BS L 171) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5) (7014) |
| BS L 173-1991 | 冷鑄用鋁-硅-鎂合金鑄件規范.(過量條件下溶液處理和沉淀處理(T7)) | Specification for castings of aluminium-silicon-magnesium alloy, chill cast (solution treated and precipitation treated to an overaged (T7) condition) |
| BS L 174-1991 | 砂型鑄造用鋁-硅-鎂合金鑄件規范(過量條件下溶液處理和沉淀處理(T7)) | Specification for castings of aluminium-silicon-magnesium alloy, sand cast (solution treated and precipitation treated to an overaged (T7) condition) |
| BS L 512-1973 | 鎂-鋁(6.0)-鋅(1.0)合金棒材和擠壓型材規范(直徑不超過150mm或較小截面尺寸) | Specification for bars and extruded sections of magnesium-6% aluminium-zinc alloy (not exceeding 150 mm diameter or minor sectional dimension) (Al 6.0, Zn 1.0) |
| BS L 513-1973 | 鎂-鋁(6.0)-鋅(1.0)合金鍛坯和鍛件規范 | Specification for forging stock and forgings of magnesium-6% aluminium-zinc alloy (Al 6.0, Zn 1.0) |
| BS MA 78-1978 | 鋁制靠岸跳板規范 | Specification for aluminium shore gangways |
| BS QC 300301-1993 | 電子元器件質量評估協調體系規范.空白詳細規范.電子設備用固定電容器.非固體電解質鋁電解質電容器.評估等級 | Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Fixed capacitors for use in electronic equipment - Aluminium electrolytic capacitors with non-solid electrolyte - Assessment level E |
| BS S 206-1999 | 鉻鎳鋁耐腐蝕鋼(沉淀硬化)棒材、冷拉線材和彈簧 | Chromium-nickel-aluminium corrosion resisting steel (precipitation hardening) rod, cold drawn wire and springs |
| BS SP 172-1999 | 鋁或鋁合金實心鉚釘.采購規范 | Rivets, solid, in aluminium or aluminium alloys - Procurement specification |
| BS SP 65-1955 | 航空用鋁合金錐形銷規范 | Specification for aluminium alloy taper pins for aeronautical purposes |
| BS TA 38-1971 | 機加工用鈦-鋁-鉬-錫-硅-碳合金棒材規范(抗拉強度1250-1420牛頓/平方毫米)(限定控制剖面25mm) | Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1250-1420 N/mm2) (limiting ruling section 25 mm) |
| BS TA 39-1971 | 鈦-鋁-鉬-錫-硅-碳合金鍛坯規范(抗拉強度1250-1420牛頓/平方毫米)(限定控制剖面25mm) | Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1250-1420 N/mm2) (limiting ruling section 25 mm) |
| BS TA 40-1971 | 機加工用鈦-鋁-鉬-錫-硅-碳合金棒材規范(抗拉強度1205-1375牛頓/平方毫米)(限定控制剖面大于25mm,達到并含7 | Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 N/mm2) (limiting ruling section over 25 mm up to and including 75 mm) |
| BS TA 41-1971 | 鈦鋁鉬錫硅碳合金鍛坯規范(抗拉強度1205-1375牛頓/平方毫米)(限定控制剖面大于25mm,達到并含75mm) | Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 N/mm2) (limiting ruling section over 25 mm up to and including 75 mm) |
| BS TA 42-1971 | 鈦-鋁-鉬-錫-硅-碳合金鍛件規范(抗拉強度1205-1375牛頓/平方毫米)(限定控制剖面大于25mm,達到并含75mm) | Specification for forgings of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 N/mm2) (limiting ruling section over 25 mm up to and including 75 mm) |
| BS TA 43-1972 | 鈦-鋁-鋯-鉬-硅合金鍛坯規范(抗拉強度990-1140牛頓/平方毫米)(限定控制剖面65mm) | Specification for forging stock of titanium-aluminium-zirconium-molybdenum-silicon alloy (tensile strength 990-1140 N/mm2) (limiting ruling section 65 mm) |
| BS TA 44-1972 | 鈦-鋁-鋯-鉬-硅合金鍛件規范(抗拉強度990-1140牛頓/平方毫米)(限定控制剖面65mm) | Specification for forgings of titanium-aluminium-zirconium-molybdenum-silicon alloy (tensile strength 990-1140 N/mm2) (limiting ruling section 65 mm) |
| BS TA 45-1973 | 機加工用鈦鋁鉬錫硅合金棒材和型材規范(抗拉強度1100-1280 N/mm<上標2>)(限定等圓斷面25mm) | Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1100-1280 N/mm2) (limiting ruling section 25 mm) |
| BS TA 46-1973 | 機加工用鈦鋁鉬錫硅合金棒材和型材規范(抗拉強度1050-1220 N/mm<上標2>)(限定等圓斷面25mm以上100mm以下(含 | Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 N/mm2) (limiting ruling section over 25 mm up to and including 100 mm) |
| BS TA 47-1973 | 鈦鋁鉬錫硅合金鍛坯規范(抗拉強度1050-1220 N/mm<上標2>)(限定等圓斷面100mm) | Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 N/mm2) (limiting ruling section 100 mm) |
| BS TA 48-1973 | 鈦鋁鉬錫硅合金鍛件規范(抗拉強度1050-1200 N/mm<上標2>)(限定等圓斷面100mm) | Specification for forgings of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1200 N/mm2) (limiting ruling section 100 mm) |
| BS TA 49-1973 | 鈦鋁鉬錫硅合金棒材和型材規范(抗拉強度1000-1200 N/mm<上標2>)(極限等圓截面100mm以上150mm以下(含150mm)) | Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mm2) (limiting ruling section over 100 mm up to and including 150 mm) |
| BS TA 50-1973 | 鈦鋁鉬錫硅合金鍛坯規范(抗拉強度1000-1200 N/mm<上標2>)(限定等圓斷面100mm以上150mm以下(含150mm)) | Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mm2) (limiting ruling section over 100 mm up to and including 150 mm) |
| BS TA 51-1973 | 鈦鋁鉬錫硅合金鍛件規范(抗拉強度1000-1200 N/mm<上標2>)(限定等圓斷面100mm以上150mm以下(含150mm)) | Specification for forgings of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mm2) (limiting ruling section over 100 mm up to and including 150 mm) |
| BS TA 56-1974 | 鈦-鋁-釩合金板材規范(抗拉強度895-1150MPa)(最大厚度100mm) | Specification for plate of titanium-aluminium-vanadium alloy (tensile strength 895-1150 MPa) (maximum thickness 100 mm) |
| BS TA 57-1974 | 鈦-鋁-鉬-錫-硅合金板材規范(抗拉強度1030-1220MPa)(最大厚度65mm) | Specification for plate of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1030-1220 MPa) (maximum thickness 65 mm) |
| BS TA 59-1980 | 鈦-鋁-釩合金板材和帶材規范(抗拉強度920-1180MPa) | Specification for sheet and strip of titanium-aluminium-vanadium alloy (tensile strength 920 MPa to 1180 MPa) |
| BSEN60317-0-3-1998 | 特種繞組線規范.一般要求.漆包圓鋁線 | Specifications for particular types of winding wires - General requirements - Enamelled round aluminium wire |
| CP 143-1-1958 | 薄板屋頂和墻面覆料實用規程.波紋和槽形鋁材 | Code of practice for sheet roof and wall coverings. Aluminium, corrugated and troughed |
| CP 143-15-1973 | 薄板屋頂和墻覆料實施規程.鋁.米制單位 | Code of practice for sheet roof and wall coverings. Code of practice for sheet roof and wall coverings. Aluminium. Metric units |
| DD 139-1986 | 鋅鋁合金錠和鑄件規范 | Specification for zinc-aluminium alloy ingots and castings |
| DD ENV 725-4-1994 | 高技術陶瓷.陶瓷粉末試驗方法.用X射線熒光光譜分析法對氮化鋁氧含量的測定 | Advanced technical ceramics. Methods of test for ceramic powders. Determination of oxygen content in aluminium nitride by XRF analysis |
| KT 1-1999 | 鋁和鋁合金 | Aluminium and aluminium alloys |
| NA to BS EN 1999-1-1-2007 | 歐洲法規9的英國國家附錄.鋁結構的設計.通用結構規則 | UK National Annex to Eurocode 9. Design of aluminium structures - General structural rules |
| NA to BS EN 1999-1-3-2007 | 歐洲法規9的英國國家附錄.鋁結構的設計.易疲勞的結構 | UK National Annex to Eurocode 9. Design of aluminium structures - Structures susceptible to fatigue |
| PD IEC 61394-2001 | 架空線.鋁、鋁合金和鋼裸導線用潤滑脂的特性 | Overhead lines. Characteristics of greases for aluminium, aluminium alloy and steel bare conductors |
| 編號 | 中文名稱 | 英文名稱 |