| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| EN 1011-4-2000 | 焊接 金屬材料焊接的推薦規范 第4部分：鋁和鋁合金的電弧焊接 | Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys |
| EN 10154-2002 | 連續熱浸鍍鋁硅鋼薄板和帶材 交貨技術條件 | Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet - Technical delivery conditions |
| EN 10214-1995 | 連續熱浸鍍鋅鋁薄鋼板和鋼帶 交貨技術條件 | Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet - Technical delivery conditions |
| EN 10215-1995 | 連續熱浸鍍鋁鋅薄鋼板和鋼帶 交貨技術條件 | Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet - Technical delivery conditions |
| EN 10244-3-2001 | 鋼絲和鋼絲制品 鋼絲上的非黑色金屬外層 第3部分：鋁鍍層 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings |
| EN 1092-4-2002 | 法蘭及其連接 按PN標注的管、閥門、配件及其附件用圓形法蘭 第4部分：鋁合金法蘭 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges |
| EN 12020-1-2001 | 鋁和鋁合金 合金EN AW-6060和EN AW-6063的精密壓制型材 第1部分：檢驗與交貨技術條件 | Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery |
| EN 12020-2-2001 | 鋁和鋁合金 合金EN AW-6060和EN AW-6063的精密壓制型材 第2部分：尺寸與形狀公差 | Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form |
| EN 12258-1-1998 | 鋁和鋁合金 術語和定義 第1部分：通用術語 | Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
| EN 12258-3-2003 | 鋁和鋁合金 術語和定義 第3部分：廢料 | Aluminium and aluminium alloys - Terms and definitions - Part 3: Scrap |
| EN 12373-1-2001 | 鋁和鋁合金 陽極氧化 第1部分：鋁上裝飾和保護陽極氧化膜的測定方法 | Aluminium and aluminium alloys - Anodizing - Part 1: Method for specifying decorative and protective anodic oxidation coatings on aluminium |
| EN 12373-10-1998 | 鋁和鋁合金 陽極氧化 第10部分：用磨擦噴射試驗機測定陽極氧化膜的平均比耐磨性 | Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus |
| EN 12373-11-2000 | 鋁和鋁合金 陽極氧化 第11部分：20°、45°、60°或85°角處測量陽極氧化膜在的鏡面反射率和鏡面光澤度 | Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20? 45? 60?or 85?國際標準分類號：25.220.20 77.120.10英文標準名稱：Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20? 45? 60?or 85? |
| EN 12373-12-2000 | 鋁和鋁合金 陽極氧化 第12部分：用積分球儀測量鋁表面的反射特性 | Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments |
| EN 12373-13-2000 | 鋁和鋁合金 陽極氧化 第13部分：用測角光度儀或?yàn)V色測角光度儀測量鋁表面的反射特性 | Aluminium and aluminium alloys - Anodizing - Part 13: Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer |
| EN 12373-14-2000 | 鋁和鋁合金 陽極氧化 第14部分：陽極氧化膜成象清晰度的目測 座標比例尺法 | Aluminium and aluminium alloys - Anodizing - Part 14: Visual determination of image clarity of anodic oxidation coatings - Chart scale method |
| EN 12373-15-2000 | 鋁和鋁合金 陽極氧化 第15部分：陽極氧化膜抗形變破裂性的評定 | Aluminium and aluminium alloys - Anodizing - Part 15: Assessment of resistance of anodic oxidation coatings to cracking by deformation |
| EN 12373-16-2001 | 鋁和鋁合金 陽極氧化 第16部分：薄陽極氧化膜的連續性檢驗 硫酸銅試驗 | Aluminium and aluminium alloys - Anodizing - Part 16: Check of continuity of thin anodic oxdation coatings; Copper sulfate test |
| EN 12373-17-2001 | 鋁和鋁合金 陽極氧化 第17部分：電擊穿電壓的測定 | Aluminium and aluminium alloys - Anodizing - Part 17: Determination of electric breakdown potential |
| EN 12373-18-2001 | 鋁和鋁合金 陽極氧化 第18部分：點蝕評定鋁用檢定系統 圖表法 | Aluminium and aluminium alloys - Anodizing - Part 18: Rating system for the evaluation of pitting corrosion; Chart method |
| EN 12373-19-2001 | 鋁和鋁合金 陽極氧化 第19部分：點蝕評定鋁用檢定系統 網格法 | Aluminium and aluminium alloys - Anodizing - Part 19: Rating system for the evaluation of pitting corrosion; Grid method |
| EN 12373-2-1998 | 鋁和鋁合金 陽極氧化 第2部分：陽極氧化膜單位面積質量（表面密度）的測定 重量分析法 | Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method |
| EN 12373-3-1998 | 鋁和鋁合金 陽極氧化 第3部分：陽極氧化膜厚度的測定 分束顯微鏡無損測量 | Aluminium and aluminium alloys - Anodizing - Part 3: Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope |
| EN 12373-4-1998 | 鋁和鋁合金 陽極氧化 第4部分：通過事先經酸處理的染斑試驗估計封閉后 陽極氧化膜吸收能力的損失 | Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment |
| EN 12373-5-1998 | 鋁和鋁合金 陽極氧化 第5部分：用導納測量法評定封閉陽極氧化膜的質量 | Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance |
| EN 12373-6-1998 | 鋁和鋁合金 陽極氧化 第6部分：通過測量事發未經酸處理的磷酸/鉻酸中浸泡后的質量損失評定封閉陽極氧化膜 | Aluminium and aluminium alloys - Anodizing - Part 6: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment |
| EN 12373-7-2002 | 鋁和鋁合金 陽極氧化 第7部分：通過測量事發經酸處理的磷酸/鉻酸中浸泡后的質量損失評定封閉陽極氧化膜的 | Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment |
| EN 12373-8-1998 | 鋁和鋁合金 陽極氧化 第8部分：著色陽極氧化膜可比耐紫外光和耐熱色牢固度的測定 | Aluminium and aluminium alloys - Anodizing - Part 8: Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings |
| EN 12373-9-1998 | 鋁和鋁合金 陽極氧化 第9部分：用磨擦輪磨損試驗機測定陽極氧化膜耐磨性和耐磨系數 | Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus |
| EN 12375-1998 | 包裝 軟鋁管 壁厚測定方法 | Packaging - Flexible aluminium tubes - Wall thickness determination method |
| EN 12392-2000 | 鋁和鋁合金 鍛制品 壓力設備生產用制品的特殊要求 | Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment |
| EN 12441-1-2001 | 鋅和鋅合金 化學分析 第1部分：鋅合金中鋁的測定 滴定法 | Zinc and zinc alloys - Chemical analysis - Part 1: Determination of aluminium in zinc alloys; Titrimetric method |
| EN 12441-6-2003 | 鋅和鋅合金 化學分析 第6部分：用原子吸收光譜法測定鋁和鐵 | Zinc and zinc alloys - Chemical analysis - Part 6: Determination of aluminium and iron-Flame atomic absorption spectrometric method |
| EN 12475-1-1998 | 致密成形型耐火制品的分類 第1部分：硅酸鋁制品 | Classification of dense shaped refractory products - Part 1: Aluminia-silica products |
| EN 12482-1-1998 | 鋁和鋁合金 一般用重軋坯料 第1部分： 熱軋重軋坯料規范 | Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot rolled reroll stock |
| EN 12482-2-1998 | 鋁和鋁合金 一般用重軋坯料 第2部分：冷軋重軋坯料規范 | Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stock |
| EN 12487-2000 | 金屬的防腐蝕 鋁和鋁合金上清洗和非清洗的鉻酸鹽轉化鍍層 | Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| EN 12816-2001 | 可移動再充式液化石油氣（LPG）鋼瓶和鋁瓶 處理 | Transportable refillable steel and aluminium LPG cylinders - Disposal |
| EN 12862-2000 | 可運輸氣瓶 可移動再充式焊接鋁合金氣瓶的設計和結構規范 | Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders |
| EN 1301-1-1997 | 鋁和鋁合金 拉制線材 第1部分：檢查和交貨的技術條件 | Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery |
| EN 1301-2-1997+AC-1998 | 鋁和鋁合金 拉制線材 第2部分：機械性能 | Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties |
| EN 1301-3-1997 | 鋁和鋁合金 拉制線材 第3部分：尺寸和公差 | Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions |
| EN 1302-1999 | 民用水處理用化學品 鋁基凝結劑 分析方法 | Chemicals used for treatment of water intended for human consumption - Aluminium-based coagulants - Analytical methods |
| EN 130300-1998 | 分規范：固體和非固體電解質鋁電解質電容器 | Sectional specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte |
| EN 130301-2002 | 空白詳細規范：非固體電解質鋁電解質電容器 | Blank detail specification: Aluminium electrolytic capacitors with non-solid electrolyte |
| EN 13048-2000 | 包裝 撓性鋁管 內部漆膜厚度測量法 | Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method |
| EN 13110-2002 | 可移動再充式焊接液化石油氣鋁瓶 設計和構造 | Transportable refillable welded aluminium cylinders for liquefied petroleum gas - Design and construction |
| EN 13195-1-2002 | 鋁和鋁合金 海洋設備（造船、海運和海上設備）用鍛造和澆鑄產品 | Aluminium and aluminium alloys - Wrought and cast products for marine applications (shipbuilding, marine and offshore) - Part 1: Specifications |
| EN 137000-1995 | 通用規范：發動機用非固體電解質的鋁電解交流固定電容器 | Generic specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors |
| EN 137100-1995 | 分規范：發動機起動器用非固體電解質鋁電解交流固定電容器 鑒定批準 | Sectional specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval |
| EN 137101-1995 | 空白詳細規范：發動機起動器用非固體電解質鋁電解交流固定電容器 鑒定批準 | Blank detail specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval |
| EN 13753-2002 | 人類生活用水處理用產品 粒狀氧化鋁 | Products used for treatment of water intended for human consumption - Granular activated aluminia |
| EN 1386-1996 | 鋁和鋁合金 梯級金屬板 規范 | Aluminium and aluminium alloys - Tread plate - Specifications |
| EN 13920-1-2003 | 鋁和鋁合金 廢料 第1部分：一般要求、取樣和試驗 | Aluminium and aluminium alloys - Scrap - Part 1: General requirements, sampling and tests |
| EN 13920-10-2003 | 鋁和鋁合金 廢料 第10部分：由用過的鋁飲料罐組成的廢料 | Aluminium and aluminium alloys - Scrap - Part 10: Scrap consisting of use aluminium beverage cans |
| EN 13920-11-2003 | 鋁和鋁合金 廢料 第11部分：包括鋁-銅散熱器在內的廢料 | Aluminium and aluminium alloys - Scrap - Part 11: Scrap consisting of aluminium-copper radiators |
| EN 13920-12-2003 | 鋁和鋁合金 廢料 第12部分：由單一合金組成的廢料 | Aluminium and aluminium alloys - Scrap - Part 12: Turnings consisting of one single alloy |
| EN 13920-13-2003 | 鋁和鋁合金 廢料 第13部分：由兩種或多種合金組成的混合切屑 | Aluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys |
| EN 13920-14-2003 | 鋁和鋁合金 廢料 第14部分：消費品鋁包裝生產的廢料 | Aluminium and aluminium alloys - Scrap - Part 14: Scrap from post-consumer aluminium packagings |
| EN 13920-15-2003 | 鋁和鋁合金 廢料 第15部分：消費品鋁包裝產生的去涂層鋁廢料 | Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer aluminium packagings |
| EN 13920-16-2003 | 鋁和鋁合金 廢料 第16部分：由浮渣、碎屑、鑄錠的金屬物組成的廢料 | Aluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and metallics |
| EN 13920-2-2003 | 鋁和鋁合金 廢料 第2部分：純鋁廢料 | Aluminium and aluminium alloys - Scrap - Part 2: Unalloyed aluminium scrap |
| EN 13920-3-2003 | 鋁和鋁合金 廢料 第3部分：線頭和纜繩 | Aluminium and aluminium alloys - Scrap - Part 3: Wire and cable scrap |
| EN 13920-4-2003 | 鋁和鋁合金 廢料 第4部分：由單一鍛壓合金組成的廢料 | Aluminium and aluminium alloys - Scrap - Part 4: Scrap consisting of one single wrought alloy |
| EN 13920-5-2003 | 鋁和鋁合金 廢料 第5部分：由同一系列的兩種或多種鍛壓合金組成的廢料 | Aluminium and aluminium alloys - Scrap - Part 5: Scrap consisting of two or more wrought alloys of the same series |
| EN 13920-6-2003 | 鋁和鋁合金 廢料 第6部分：由兩種或多種鍛壓合金組成的廢料 | Aluminium and aluminium alloys - Scrap - Part 6: Scrap consisting of two or more wrought alloys |
| EN 13920-7-2003 | 鋁和鋁合金 廢料 第7部分：由鑄錠組成的廢料 | Aluminium and aluminium alloys - Scrap - Part 7: Scrap consisting of castings |
| EN 13920-8-2003 | 鋁和鋁合金 廢料 第8部分：由鋁分離工藝必經的切歲程序中產生的非鐵質材料組成的廢料 | Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes |
| EN 13920-9-2003 | 鋁和鋁合金 廢料 第9部分：非鐵質碎料的鋁分離工藝所產生的廢料 | Aluminium and aluminium alloys - Scrap - Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials |
| EN 13957-2003 | 鋁合及鋁合金 一般用途擠壓圓形、蛇形管 規范 | Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification |
| EN 13958-2003 | 鋁及鋁合金 一般用途冷拉圓形、蛇形管 規范 | Aluminium and aluminium alloys - Cold drawn round, coiled tube for general applications - Specification |
| EN 1396-1996 | 鋁和鋁合金 一般用途的盤繞涂層薄板和帶材 規范 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| EN 13981-1-2003 | 鋁及鋁合金 鐵路結構用產品，檢驗和交貨技術條件 第1部分：擠壓產品 | Aluminium and aluminium alloys - Products for structural railway applications; Technical conditions for inspection and delivery - Part 1: Extruded products |
| EN 14121-2003 | 鋁及鋁合金 電工用鋁片、鋁帶和鋁板 | Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications |
| EN 1559-4-1999 | 鑄造 交貨的技術條件 第3部分：鋁合金鑄件的附加要求 | Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings |
| EN 1592-1-1997 | 鋁和鋁合金 HF接縫焊接管 第1部分：檢驗和交貨技術條件 | Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection and delivery |
| EN 1592-2-1997 | 鋁和鋁合金 HF接縫焊接管 第2部分：機械性能 | Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties |
| EN 1592-3-1997 | 鋁和鋁合金 HF接縫焊接管 第3部分：圓形管的尺寸和形狀公差 | Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and form for circular tubes |
| EN 1592-4-1997 | 鋁和鋁合金 HF接縫焊接管 第4部分：方形、矩形和異形管的尺寸和形狀公差 | Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes |
| EN 1669-1996 | 鋁及鋁合金 試驗方法 薄板材和帶材的耳子試驗 | Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip |
| EN 1676-1996 | 鋁及鋁合金 重熔用的合金錠 規范 | Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications |
| EN 1706-1998 | 鋁及鋁合金 鑄件 化學成分和機械性能 | Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
| EN 1715-1-1997 | 鋁和鋁合金 拉制件 第1部分：檢驗和交貨的一般要求及技術條件 | Aluminium and aluminium alloys - Drawing stock - Part 1: General requirements and technical conditions for inspection and delivery |
| EN 1715-2-1997+AC-1998 | 鋁和鋁合金 拉制坯料 第2部分：電氣應用的特殊要求 | Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical applications |
| EN 1715-3-1997+AC-1998 | 鋁和鋁合金 拉制坯料 第3部分：機械應用的特殊要求(包括焊接) | Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding) |
| EN 1715-4-1997 | 鋁和鋁合金 拉制坯料 第4部分：焊接應用的特殊要求 | Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications |
| EN 1759-4-2003 | 法蘭及其接頭 管材、閥門、管件及附件用已命名種類的圓形法蘭 第4部分：鋁合金法蘭 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges |
| EN 1780-1-2002 | 鋁和鋁合金 再熔化母合金和鑄件用合金鋁鑄錠標識 第1部 分：數字標識體系 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system |
| EN 1780-2-2002 | 鋁和鋁合金 再熔化母合金及鑄件用合金鋁鑄錠標識 第2部分：基于化學符號標識體系 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system |
| EN 1780-3-2002 | 鋁和鋁合金 再熔化母合金及鑄件用合金鋁鑄錠標識 第1部分：數字標識體系 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 3: Writing rules for chemical compositon |
| EN 1802-2002 | 可運輸氣瓶 無縫鋁合金氣瓶的周期檢驗和試驗 | Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders |
| EN 1967-2002 | 建筑粘合劑 使用與活動滾筒粘合方法有聯系的潮濕剝離試驗對鋁表面處理效用的評估 | Structural adhesives - Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method |
| EN 1975-1999+AC-1999 | 可運輸氣瓶 容量從0,5L到150L(包括150L)可再灌裝的無縫鋁和鋁合金制氣瓶的設計和結構規范 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litre / Note: To be amended by EN 1975/prA1 (2003-07). |
| EN 1975/prA1-2003 | 可運輸氣瓶 容積從0.5L至150L可再灌裝可運輸無縫鋁和鋁合金氣體瓶設計和結構規范 修改A1 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litres; Amendment A1 / Note: Intended as an amendment to EN |
| EN 2004-1-1993 | 航空航天系列 鋁和鋁合金產品試驗方法 第1部分：鍛鋁合金電導率的測定 | Aerospace series; test methods for aluminium and aluminium alloy products - Part 1: Determination of electrical conductivity of wrought aluminium alloys |
| EN 2004-5-1993 | 航空航天系列 鋁和鋁合金產品試驗方法 第5部分：包層半成品的包層厚度和銅擴散的測定 | Aerospace series; test methods for aluminium and aluminium alloy products - Part 5: Determination of cladding thickness and copper diffusion of clad semi-finished products |
| EN 2044-2001 | 航空航天系列 拉制的圓形鋁和鋁合金型材 容差h11 直徑4mm≤D≤63mm 尺寸 | Aerospace series - Round bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm ≤ D ≤ 63 mm - Dimensions |
| EN 2045-2001 | 航空航天系列 拉制的方形鋁和鋁合金型材 容差h11 厚度6mm≤a≤50mm 尺寸 | Aerospace series - Square bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm ≤ a ≤ 50 mm - Dimensions |
| EN 2046-2001 | 航空航天系列 拉制的六角形鋁和鋁合金型材 容差h11 厚度6mm≤a≤50mm 尺寸 | Aerospace series - Hexagonal bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Width across flats 7 mm ≤ a ≤ 50 mm - Dimensions |
| EN 2047-2001 | 航空航天系列 擠壓的鋁合金珠狀L截面 尺寸 | Aerospace series - Beaded L-section extruded, in aluminium alloys - Dimensions |
| EN 2048-2001 | 航空航天系列 擠壓的鋁合金L截面 尺寸 | Aerospace series - Extruded L-section, in aluminium alloys - Dimensions |
| EN 2049-2001 | 航空航天系列 擠壓的鋁合金槽形材 尺寸 | Aerospace series - Extruded channel section, in aluminium alloys - Dimensions |
| EN 2050-2001 | 航空航天系列 擠壓的鋁合金T型材 尺寸 | Aerospace series - Extruded T-section, in aluminium alloys - Dimensions |
| EN 2066-2001 | 航空航天系列 鋁合金擠壓型材 一般公差 | Aerospace series - Extruded section in aluminium alloys - General tolerances |
| EN 2070-1-1989+A1-1993 | 航空航天系列 鍛造的鋁和鋁合金產品 技術法規 第1部分：一般要求 | Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 1: general requirements |
| EN 2070-2-1989 | 航空航天系列 鍛造的鋁和鋁合金產品 技術規范 第2部分：薄板、帶型材和板材 | Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 2: Sheet, strip formed profiles and plate |
| EN 2070-3-1989 | 航空航天系列 鍛造的鋁和鋁合金產品 技術規范 第3部分：棒材和型材 | Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 3: Bar and section |
| EN 2070-4-1989 | 航空航天系列 鍛造的鋁和鋁合金產品 技術規范 第4部分：結構用管 | Aerospace series - Aluminium and aluminium alloy wrought products - Technical specifications - Part 4: Tube for structures |
| EN 2070-5-1989 | 航空航天系列 鍛造的鋁和鋁合金產品 技術規范 第5部分：壓力下用管 | Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 5: Tube used under pressure |
| EN 2070-6-1989 | 航空航天系列 鍛造的鋁和鋁合金產品 技術規范 第6部分：鉚釘用線材 | Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 6: Rivet wire |
| EN 2070-7-1989 | 航空航天系列 鍛造的鋁和鋁合金產品 技術規范 第7部分：鍛坯 | Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 7: Wrought forging stock |
| EN 2071-2001 | 航空航天系列 鋁和鋁合金薄板 厚度0.25mm≤a≤6mm 尺寸 | Aerospace series - Sheets in aluminium and aluminium alloys - Thickness 0.25 mm≤ a ≤ 6 mm - Dimensions |
| EN 2072-1993 | 航空航天系列 鋁AI-P1050AH14 薄板材和帶材0.4mm≤a≤6mm | Aerospace series - Aluminium Al-P1050A H14; sheet and strip 0.4 ≤ a ≤6 mm |
| EN 2076-1-1989+A1-1993 | 航空航天系列 鋁和鎂合金鑄錠和鑄件 技術規范 第1部分：一般要求 | Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 1: general requirements |
| EN 2076-2-1989 | 航空航天系列 鋁和鎂合金鑄錠和鑄件 技術規范 第2部分：冶煉用鑄錠 | Aerospace series - Aluminium and magnesium alloy ingots and castings - Technical specification - Part 2: Ingots for remelting |
| EN 2076-3-1989 | 航空航天系列 鋁和鎂合金鑄錠和鑄件 技術規范 第3部分：預制件和產品鑄件 | Aerospace series - Aaluminium and magnesium alloy ingots and castings - Technical specification - Part 3: Pre-production and production castings |
| EN 2082-1-1989+A1-1993 | 航空航天系列 鋁合金鍛坯和鍛件 技術規范 第1部分：一般要求 | Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 1: general requirements |
| EN 2082-2-1989 | 航空航天系列 鋁合金鍛坯和鍛件 技術規范 第2部分：鍛坯 | Aerospace series - Aluminium alloy forging stock and forgings - Technical specification - Part 2: Forging stock |
| EN 2082-3-1989 | 航空航天系列 鋁合金鍛坯和鍛件 技術規范 第3部分：預制件和鍛件 | Aerospace series - Aluminium alloy forging stock and forgings - Technical specification - Part 3: Pre-production and production forgings |
| EN 2089-1994 | 航空航天系列 鋁合金AL-P2014A T6或T62 薄板及帶材 0.4mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P2014A-T6 or T62 - sheet and strip - 0.4 mm ≤ a ≤ 6 mm |
| EN 2092-1993 | 航空航天系列 鋁合金AL-P7050-T6或T62 包層薄板和帶材0.4mm≤a≤6mm | Aerospace series - Aluminium alloy Al-P7075-T6 or T62 - Clad sheet and strip 0.4mm≤ a ≤6 mm |
| EN 2093-1992 | 航空航天系列 鋁合金AL-P7009-T74 手工鍛件20mm≤a≤150mm | Aerospace series - Aluminium alloy AL-P7009-T74 - Hand forgins 20 mm ≤ a ≤ 150 mm |
| EN 2094-1992 | 航空航天系列 鋁合金AL-P7009-T74 模鍛件3mm≤a≤150mm | Aerospace series - Aluminium alloy AL-P7009-T74 - Die forgins 3 mm ≤ a ≤ 150 mm |
| EN 2100-1992 | 航空航天系列 鋁合金AL-P2014A-T4511 擠壓棒材和型材a或D≤200mm | Aerospace series - Aluminium alloy AL-P2014A-T4511 - Extruded bars and sections a or D ≤ 200 mm |
| EN 2101-1991 | 航空航天系列 鋁合金和鍛鋁合金鉻酸陽極化處理 | Aerospace series - Chromic acid anodizing of aluminium and wrought aluminium alloys |
| EN 2122-1996 | 航空航天系列 陽極化和鉻酸鹽處理的扁平鋁合金墊圈 | Aerospace series - Washers, flat, in aluminium alloy, anodized or chromated |
| EN 2126-1992 | 航空航天系列 鋁合金AL-P7075-T651 板材 6mm≤a≤80mm | Aerospace series - Aluminium alloy AL-P7075-T651 - Plates 6 mm ≤ a ≤ 80 mm |
| EN 2127-1992 | 航空航天系列 鋁合金AL-P7075-T73511 擠壓棒材和型材 a或D≤100mm | Aerospace series - Aluminium alloy AL-P7075-T73511 - Extrudes bars and sections a or D ≤ 100 mm |
| EN 2128-1992 | 航空航天系列 鋁合金AL-P7075-T7351 拉制棒材 6mm≤a或D≤75mm | Aerospace series - Aluminium alloy AL-P7075-T7351 - Drawn bars 6 mm ≤ a or D ≤ 75 mm |
| EN 2131-2001 | 航空航天系列 鋁合金板材 厚度 6mm≤a≤160mm 尺寸 | Aerospace series - Plates in aluminium alloys - Thickness 6 mm ≤a ≤ 160 mm - Dimensions |
| EN 2134-2001 | 航空航天系列 擠壓鋁和鋁合金圓形型材 直徑10mm≤D≤220mm 尺寸 | Aerospace series - Round bars, extruded, in aluminium and aluminium alloys - Diameter 10 mm ≤ D ≤ 220 mm - Dimensions |
| EN 2144-1994 | 航空航天系列 鋁合金2117系列萬能分度頭型實心鉚釘 英制系列 | Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, inch based series |
| EN 2145-1994 | 航空航天系列 經過陽極氧化或鉻酸鹽處理的2117號鋁合金制萬能分度頭型實心鉚釘 英制系列 | Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series |
| EN 2149-1996 | 航空航天系列 經陽極氧化處理或經鉻酸鹽處理的5056A型鋁制萬能分度頭型實心鉚釘 英制系列 | Aerospace series - Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series |
| EN 22063-1993 | 金屬和其他無機涂覆蓋層 熱噴鍍 鋅、鋁及其合金 | Metallic and other inorganic coatings - Thermal spraying - Zinc, aluminium and their alloys (ISO 2063:1991, modified) |
| EN 2257-1997 | 航空航天系列 結構用鋁和鋁合金環形管 直徑為6mm≤D≤100mm.厚度1mm≤a≤6mm.尺寸 | Aerospace series - Circular tubes for structures in aluminium and aluminium alloys - Diameter 6 mm D 100 mm - Thickness 1 mm a 6 mm - Dimensions |
| EN 2258-1997 | 航空航天系列 流體設備用鋁和鋁合金環形管 直徑為3.2mm≤D≤100mm 厚度0.5mm≤a≤2.5mm.尺寸 | Aerospace series - Circular tubes for fluids in aluminium and aluminium alloys - Diameter 3,2 mm ≤ D≤ 100 mm - Thickness 0,6 mm ≤ a 2,5 mm - Dimensions |
| EN 2284-1991 | 航空航天系列 鋁合金和鍛鋁合金硫酸陽極化處理 | Aerospace series - Sulphuric acid anodizing of aluminium and wrought aluminium alloys |
| EN 2285-1989 | 航空航天系列 具有自潤滑襯套的純鋁合金軸套 尺寸和負荷 | Aerospace series - Bushes, plain aluminium alloy with self-lubricating liner; Dimensions and loads |
| EN 2286-1989 | 航空航天系列 具有自潤滑襯套的法蘭鋁合金軸套筒 尺寸和負荷 | Aerospace series - Bushes, flanged aluminium alloy with self-lubricating liner; Dimensions and loads |
| EN 2289-1996 | 航空航天系列 飛行控制器用鋁合金操縱桿 技術規范 | Aerospace series - Rod bodies in aluminium alloy for flight controls - Technical specification |
| EN 2290-1-1998 | 航空航天系列 可調節終端配件用的鋁合金飛行控制器操縱桿 第1部分：尺寸和荷載 | Aerospace series - Rod bodies, flight control in aluminium alloy, for adjustable end fittings - Part 1: Dimensions and loads |
| EN 2318-1992 | 航空航天系列 AL-P2024-T3511鋁合金 1.2mm≤a或D≤150mm的擠壓棒材和型材 | Aerospace series; aluminium alloy AL-P2024-T3511; extruded bars and sections 1.2 mm ≤ a or D ≤ 150 mm |
| EN 2326-1992 | 航空航天系列 AL-P6082-T6鋁合金 D ≤ 200 mm的擠壓棒材和型材 | Aerospace series - Aluminium alloy AL-P6082-T6; extruded bars and sections a or D ≤ 200 mm |
| EN 2334-1997 | 航空航天系列 鋁和鋁合金鉻硫酸洗液 | Aerospace series - Chromic-sulphuric acid pickle of aluminium and aluminium alloys |
| EN 2365-1989 | 航空航天系列 鋁合金軸環 | Aerospace series; collars, aluminium alloy |
| EN 2381-1992 | 航空航天系列 AL-P7009-T7452鋁合金 40 mm≤ a ≤ 150 mm手工鍛件 | Aerospace series- Aluminium alloy AL-P7009-T7452 - Hand forgings 40 mm ≤ a ≤ 150 mm |
| EN 2384-1992 | 航空航天系列 AL-P2014A-T6511鋁合金 a或D≤ 150 mm擠壓棒材和型材 | Aerospace series - Aluminium alloy AL-P2014A-T6511 - Extruded bars and sections a or D ≤ 150 mm |
| EN 2385-1992 | 航空航天系列 AL-P7009-T74511鋁合金 a或D≤ 125mm擠壓棒材和型材 | Aerospace series - Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D ≤ 125 mm |
| EN 2395-1994 | 航空航天系列 AL-P2014A-T4或T42鋁合金 0.4 mm ≤ a ≤ 6 mm薄板材和帶材 | Aerospace series - Aluminium alloy AL-P2014A - T4 or T42 - Sheet and strip - 0.4 mm ≤ a ≤ 6 mm |
| EN 2437-2001 | 航空航天系列 鋁和鋁合金用鉻酸鹽轉化涂層(黃色) | Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys |
| EN 2536-1995 | 航空航天系列 鋁合金的硬陽極氧化處理 | Aerospace series - Hard anodizing of aluminium alloys |
| EN 2599-2001 | 航空航天系列 鋁和鋁合金帶條 厚度 0.25 mm ≤ a≤ 3.2 mm 尺寸 | Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0.25 mm≤ a ≤ 3.2 mm - Dimensions |
| EN 2630-1993 | 航空航天系列 AL-P7009-T74511鋁合金有a或D ≤125mm的周圍有粗粒控制的擠壓棒材和型材 | Aerospace series - Aluminium alloy Al-P7009-T74511 - Extruded bars and sections a or D ≤ 125 mm with peripheral coarse grain control |
| EN 2632-1993 | 航空航天系列 AL-P7075-T73511鋁合金a或D≤100mm的周圍有粗粒控制的擠壓棒材和型材 | Aerospace series - Aluminium alloy Al-P7075-T73511 - Extruded bars and sections a or D ≤ 100 mm with peripheral coarse grain control |
| EN 2633-1993 | 航空航天系列 AL-P2024-T3511鋁合金a或D≤150mm的周圍有粗粒控制的擠壓棒材和型材 | Aerospace series - Aluminium alloy Al-P2024-T3511 - Extruded bars and sections 1.2 mm ≤ a or D ≤ 150 mm with peripheral coarse grain control |
| EN 2636-1993 | 航空航天系列 AL-P6082-T6鋁合金鋁合金a或D≤200mm的周圍有粗粒控制的擠壓棒材和型材 | Aerospace series - Aluminium alloy Al-P6082-T6 - Extruded bars and sections a or D ≤ 200 mm with peripheral coarse grain control |
| EN 2693-1993 | 航空航天系列 AL-P5086-H111鋁合金 薄板和帶材 0.3 ≤ a≤6 mm | Aerospace series - Aluminium alloy Al-P5086-H111 - Sheet and strip 0.3 ≤ a ≤6 mm |
| EN 2694-1993 | 航空航天系列 AL-P6061-T6或T62鋁合金 薄板和帶材 0.4 ≤a≤6 mm | Aerospace series - Aluminium alloy Al-P6061-T6 or T62 - Sheet and strip 0.4 ≤ a ≤6 mm |
| EN 2695-1993 | 航空航天系列 AL-P6081-T6鋁合金 薄板和帶材 0.3 ≤ a≤ 6 mm | Aerospace series - Aluminium alloy Al-P6081-T6 - Sheet and strip 0.3 ≤ a ≤6 mm |
| EN 2696-1993 | 航空航天系列 AL-P7075-T6或T62鋁合金 薄板和帶材 0.4 ≤ a≤ 6 mm | Aerospace series - Aluminium alloy Al-P7075-T6 or T62 - Sheet and strip 0.4≤ a ≤6 mm |
| EN 286-4-1994 | 裝空氣或氮?dú)獾暮?jiǎn)單不著火的壓力容器 第4部分：鐵路運輸車輛氣動剎車設備和輔助氣動設備用的鋁合金壓力容 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| EN 287-2-1992+A1-1997 | 焊機的合格性測試 熔焊 第2部分：鋁和鋁合金 | Approval testing of welders; fusion welding; part 2: aluminium and aluminium alloys |
| EN 288-4-1992+A1-1997 | 金屬材料焊接程序規范和鑒定 第4部分：鋁及其合金的電弧焊焊接程序試驗 | Specification and approval of welding procedures for metallic materials; part 4: welding procedure tests for the arc welding of aluminium and its alloys |
| EN 2912-1996 | 航空航天系列 陽極氧化或鉻酸鹽處理鋁合金制大直徑平墊圈 | Aerospace series - Washers, flat, large diameter, in aluminium alloy, anodized or chromated |
| EN 29658-1991 | 鋼 鋁含量的測定 火焰原子吸收光譜法 | Steel; determination of aluminium content; flame atomic absorption spectrometric method (ISO 9658:1990) |
| EN 30042-1994 | 鋁和鋁焊合金弧焊接頭 缺陷質量分級指南 | Arc-welded joints in aluminium and its weldable alloys - Guidance on quality levels for imperfections (ISO 10042:1992) |
| EN 3665-1997 | 航空航天系列 色漆和清漆的檢驗方法 鋁合金耐線狀腐蝕的檢驗 | Aerospace series - Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys |
| EN 3730-2001 | 航空航天系列 具有橡膠緩沖的鋁合金鞍壯固定和滑動型夾箍 尺寸質量 | Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions, masses |
| EN 3869-2003 | 航空航天系列 管連接 松套法蘭和密封墊 碳氟橡膠墊和鋁合金附件 | Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy / Note: To be replaced by prEN 3869 (2003-05). |
| EN 40-6-2002 | 燈柱 第6部分：鋁燈柱要求 | Lighting columns - Part 6: Requirements for aluminium lighting columns |
| EN 4054-2003 | 航空航天系列 管連接、松套法蘭和密封件 碳氟橡膠密封件和鋁合金附件 技術規范 | Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy; Technical specification / Note: To be replaced by prEN 4054 (2003-05). |
| EN 4114-2001 | 航空航天系列 帶橡膠墊減震的鋁合金環形Ｐ型卡箍 尺寸、質量 | Aerospace series - Clamps, loop ("P" type) in aluminium alloy with rubber cushioning - Dimensions, masses |
| EN 4324-2001 | 航空航天系列 鋁合金AL-W42201 焊接用填縫金屬桿 | Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding; Rod |
| EN 4341-2001 | 航空航天系列 鋁合金 AL-W46431 焊接用填縫金屬絲和桿 | Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding; Wire and rod |
| EN 485-1-1993 | 鋁和鋁合金 片材、帶材和板材 第1部分：檢驗和交貨的技術條件 | Aluminium and aluminium alloys-Sheet, strip, and plate-Part 1: Technical conditions for inspection and delivery |
| EN 485-2-1994 | 鋁和鋁合金 片材、帶材和板材 第2部分：機械性能 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties |
| EN 485-3-2003 | 鋁和鋁合金 片材、帶材和板材 第3部分：熱軋制品的形狀和尺寸公差 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products |
| EN 485-4-1993 | 鋁和鋁合金 片材、帶材和板材 第4部分：冷軋制品的形狀和尺寸公差 | Aluminium and aluminium alloys-Sheet, strip and plate-Part 4: Tolerances on shape and dimensions for cold-rolled products |
| EN 486-1993 | 鋁和鋁合金 擠壓鑄錠 規范 | Aluminium and aluminium alloys-Extrusion ingots-Specifications |
| EN 487-1993 | 鋁和鋁合金 軋錠 規范 | Aluminium and aluminium alloys- Rrolling ingots- Specifications |
| EN 50052-1986+A2-1993 | 充氣高壓開關控制設備用鑄鋁合金外殼 | Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear |
| EN 50064-1989+A1-1993 | 充氣高壓開關控制設備用鍛制鋁和鋁合金外殼 | Wrouhgt aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear |
| EN 50069-1991+A1-1993 | 充氣高壓開關設備和控制設備用鑄鋁合金和鍛鋁合金焊接的混合材料 外殼規范 | Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear |
| EN 50183-2000 | 架空導線 鋁鎂硅合金導線 | Conductors for overhead lines - Aluminium-magnesium-silicon alloy wires |
| EN 507-1999 | 金屬薄板材制成的屋頂產品 鋁薄板材全支撐屋頂產品規范 | Roofing products from metal sheet - Specification for fully supported roofing products of aluminium sheet |
| EN 508-1-2000 | 金屬薄板材制成的屋頂產品 鋼、鋁或不銹鋼薄板自支撐產品規范 第1部分：鋼 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel |
| EN 508-2-2000 | 金屬薄板材制成的屋頂產品 鋼、鋁或不銹鋼薄板自支撐產品規范 第2部分：鋁 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium |
| EN 508-3-2000 | 金屬薄板材制成的屋頂產品 鋼、鋁或不銹鋼薄板自支撐產品規范 第3部分：不銹鋼 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel |
| EN 515-1993 | 鋁和鋁合金 鍛制品 韌度表示方法 | Aluminium and aluminium alloys; wrought products; Temper designations |
| EN 541-1995 | 鋁和鋁合金 輥壓罐頭、封閉塞和蓋子產品 規范 | Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications |
| EN 546-1-1996 | 鋁及鋁合金 箔 第1部分：檢驗和交貨的技術條件 | Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery |
| EN 546-2-1996 | 鋁及鋁合金 箔 第2部分：機械性能 | Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties |
| EN 546-3-1996 | 鋁及鋁合金 箔 第3部分：尺寸公差 | Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions |
| EN 546-4-1997 | 鋁及鋁合金 箔 第4部分：特殊性能要求 | Aluminium and aluminium alloys - Foil - Part 4: Special property requirements |
| EN 570-1994 | 鋁和鋁合金 來自于鍛制品的沖擊擠壓鋁塊 規范 | Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specifications |
| EN 573-1-1994 | 鋁和鋁合金 鍛制產品化學成分和外形 第1部分：數字標記系統 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system |
| EN 573-2-1994 | 鋁和鋁合金 鍛制產品化學成分和外形 第2部分：基于標記系統的化學符號 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based designation system |
| EN 573-3-2003 | 鋁和鋁合金 鍛制產品化學成分和外形 第3部分：化學成分 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition |
| EN 573-4-1994 | 鋁和鋁合金 鍛制產品化學成分和外形 第4部分：產品外形 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4: Forms of products |
| EN 575-1995 | 鋁和鋁合金 熔鑄生產的母合金 規范 | Aluminium and aluminium alloys - Master alloys produced by melting - Specifications |
| EN 576-1995 | 鋁和鋁合金 再熔非合金鋁錠 規范 | Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications |
| EN 577-1995 | 鋁和鋁合金 液體金屬 規范 | Aluminium and aluminium alloys - Liquid metal - Specifications |
| EN 586-1-1997 | 鋁和鋁合金 鍛件 第1部分：檢驗和交貨的技術條件 | Aluminium and Alluminium alloys - Forgings - Part 1: Technical conditions for inspection and delivery |
| EN 586-2-1994 | 鋁和鋁合金 鍛件 第2部分：機械特性和附加特性要求 | Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements |
| EN 586-3-2001 | 鋁和鋁合金 鍛件 第3部分：尺寸和形狀公差 | Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form |
| EN 601-1994 | 鋁和鋁合金 鑄件 與食品接觸用鑄件的化學成分 | Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with food |
| EN 602-1994 | 鋁和鋁合金 鍛制品 生產與食品接觸的材料中使用的半成品的化學成分 | Aluminium and aluminium alloys - Wrought products - Chemical composition of semi products used for the fabrication of articles for use in contact with food |
| EN 603-1-1996 | 鋁和鋁合金 鍛坯 第1部分：檢驗和交貨的技術條件 | Aluminium and aluminium alloys - Wrought forging stock - Part 1: Technical conditions for inspection and delivery |
| EN 603-2-1996 | 鋁和鋁合金 鍛坯 第2部分：機械性能 | Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties |
| EN 603-3-2000 | 鋁和鋁合金 鍛坯 第3部分：尺寸和形狀公差 | Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form |
| EN 60317-0-3-1998+A1-2000 | 特種繞組線規范 第0部分：一般要求 第3節:漆包圓鋁線 | Specifications for particular types of winding wires - Part 0: General requirements - Section 3: Enamelled round aluminium wire (IEC 60317-0-3:1997) |
| EN 60317-15-1994+A1-1998 | 特種繞組線規范 第15部分：180級聚酯酰亞胺漆包圓鋁線 | Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180 (IEC 60317-15:1990) |
| EN 60317-25-1996+A1-1997+A2-1998 | 特種繞組線規范 第25部分：200級聚酰胺-酰亞胺包敷聚酯或聚酯酰亞胺漆包圓鋁線 | Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 (IEC 60317-25:1990) |
| EN 604-1-1997 | 鋁和鋁合金 鑄鍛件坯 第1部分：檢查和交付的技術條件 | Aluminium and aluminium alloys - Cast forging stock - Part 1: Technical conditions for inspection and delivery |
| EN 604-2-1997 | 鋁和鋁合金 鑄鍛件坯 第2部分：尺寸和形狀公差 | Aluminium and aluminium alloys - Cast forging stock - Part 2: Tolerances on dimensions and form |
| EN 60889-1997 | 架空線導線用硬拉制鋁線 | Hard-drawn aluminium wire for overhead line conductors (IEC 60889:1987) |
| EN 61044-1992 | 牽引用鋁酸蓄電池組的利用機會充電 | Opportunity-charging of lead-acid traction batteries (IEC 61044:1990) |
| EN 61232-1995+A11-2000 | 電氣用鋁包鋼線 | Aluminium-clad steel wires for electrical purposes (IEC 61232:1993, modified) |
| EN 683-1-1996 | 鋁和鋁合金 散熱片坯料 第1部分：檢驗和交貨技術條件 | Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery |
| EN 683-2-1996 | 鋁和鋁合金 散熱片坯料 第2部分：機械特性 | Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties |
| EN 683-3-1996 | 鋁和鋁合金 散熱片坯料 第3部分：尺寸和形狀公差 | Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form |
| EN 725-1-1997 | 先進技術陶瓷 陶瓷粉的試驗方法 第1部分：氧化鋁中雜質的測定 | Advanced technical ceramics - Methods of test for ceramic powders - Part 1: Determination of impurities in alumina |
| EN 754-1-1997 | 鋁和鋁合金 冷拔棒材/條材和管材 第1部分：檢驗和交貨技術條件 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
| EN 754-2-1997 | 鋁和鋁合金 冷拔棒材/條材和管材 第2部分：機械特性 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties |
| EN 754-3-1995 | 鋁和鋁合金 冷拔棒材/條材和管材 第3部分：圓形棒材的尺寸和形狀公差 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form |
| EN 754-4-1995 | 鋁和鋁合金 冷拔棒材/條材和管材 第4部分：方形條材的尺寸和形狀公差 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form |
| EN 754-5-1995 | 鋁和鋁合金 冷拔棒材/條材和管材 第5部分：矩形棒材的尺寸和形狀公差 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form |
| EN 754-6-1995 | 鋁和鋁合金 冷拔棒材/條材和管材 第6部分：六角形條材的尺寸和形狀公差 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form |
| EN 754-7-1998 | 鋁和鋁合金 冷拔棒材/條材和管材 第7部分：無縫管的尺寸和形狀公差 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form |
| EN 754-8-1998 | 鋁和鋁合金 冷拔棒材/條材和管材 第8部分：舷窗管的尺寸和形狀公差 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form |
| EN 755-1-1997 | 鋁和鋁合金 擠壓棒材/條材、管材和型材 第1部分：檢驗和交貨的技術條件 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
| EN 755-2-1997 | 鋁和鋁合金 擠壓棒材/條材、管材和型材 第2部分：機械特性 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties |
| EN 755-3-1995 | 鋁和鋁合金 擠壓棒材/條材、管材和型材 第3部分：圓形棒材的尺寸和形狀公差 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Partie 3: Round bars, tolerances on dimensions and form |
| EN 755-4-1995 | 鋁和鋁合金 擠壓棒材/條材、管材和型材 第4部分：方形條材的尺寸和形狀公差 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Partie 4: Square bars, tolerances on dimensions and form |
| EN 755-5-1995 | 鋁和鋁合金 擠壓棒材/條材、管材和型材 第5部分：矩形棒材的尺寸和形狀公差 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Partie 5: Rectangular bars, tolerances on dimensions and form |
| EN 755-6-1995 | 鋁和鋁合金 擠壓棒材/條材、管材和型材 第6部分：六角形條材的尺寸和形狀公差 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Partie 6: Hexagonal bars, tolerances on dimensions and form |
| EN 755-7-1998 | 鋁和鋁合金 擠壓棒材/條材、管材和型材 第7部分：無縫管的尺寸和形狀公差 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form |
| EN 755-8-1998 | 鋁和鋁合金 擠壓棒材/條材、管材和型材 第8部分：出口孔的尺寸和形狀公差 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form |
| EN 755-9-2001 | 鋁和鋁合金 擠壓棒材/條材、管材和型材 第9部分：型材的尺寸和形狀公差 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form |
| EN 851-1995 | 鋁和鋁合金 生產烹調器具用的圓坯料 規范 | Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications |
| EN 878-1997 | 人類用水處理用的化學制品 硫酸鋁 | Chemicals used for treatment of water intended for human consumption - Aluminium sulfate |
| EN 881-1997 | 人類用水處理用的化學制品 氯化鋁、氯化鋁氫氧化物和硫酸鹽氯化鋁氫氧化物( 單體) | Chemicals used for treatment of water intended for human consumption - Aluminium chloride, aluminium chloride hydroxide and aluminium chloride hydroxide sulfate (monomeric) |
| EN 882-1997 | 人類用水處理用的化學制品 鋁酸鈉 | Chemicals used for treatment of water intended for human consumption - Sodium aluminate |
| EN 883-1997 | 人類用水處理用的化學制品 聚羥基氯化鋁和聚羥基硫酸鹽氯化鋁 | Chemicals used for treatment of water intended for human consumption - Polyaluminium chloride hydroxide and polyaluminium chloride hydroxide sulfate |
| EN 885-2001 | 人類用水處理用的化學制品 多硅酸鹽氯化鋁氫氧化物 | Chemicals used for treatment of water intended for human consumption - Polyaluminium chloride hydroxide silicate |
| EN 886-2001 | 人類用水處理用的化學制品 多硅酸鹽硫酸鹽鋁氫氧化物 | Chemicals used for treatment of water intended for human consumption - Polyaluminium hydroxide silicate sulfate |
| EN 887-2001 | 人類用水處理用的化學制品 硫酸鹽三鐵鋁 | Chemicals used for treatment of water intended for human consumption - Aluminium iron(III) sulfate |
| EN 935-2001 | 人類用水處理用的化學制品 氯化鋁鐵（III）（單體）和氯化烴鋁鐵（III）（單體） | Chemicals used for treatment of water intended for human consumption - Aluminium iron(III) chloride (monomeric) and aluminium iron(III) chloride hydroxide (monomeric) |
| EN 941-1995 | 鋁和鋁合金 一般應用的圓形和圓形原料 規范 | Aluminium and aluminium alloys - Circle and circle stock for general applications - Specifications |
| EN 955-2-1995 | 耐熔產品的化學分析 第2部分：含有硅和/或鋁的產品（濕分析法） | Chemical analysis of refractory products - Part 2: Products containing silica and/or alumina (wet method) |
| EN ISO 105-X01-1995 | 紡織品 色牢度試驗 第X01部分：耐碳化色牢度：硫化鋁法 | Textiles - Tests for colour fastness - Part X01: Colour fastness to carbonizing: Aluminium chloride (ISO 105-X01:1993) |
| EN ISO 11126-7-1999 | 涂裝油漆和有關產品前鋼材預處理 噴射清理用非金屬磨料的技術要求第7部分：熔融氧化鋁 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:1995) |
| EN ISO 12020-2000 | 水質 鋁的測定 原子吸收光譜法 | Water quality - Determination of aluminium - Atomic absorption spectrometric methods (ISO 12020:1997) |
| EN ISO 12215-3-2002 | 小艇 船體結構和尺寸 第3部分：材料：鋼、鋁合金、木材、其它材料 | Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002) |
| EN ISO 13919-2-2001 | 焊接 電子束和激光焊接頭 缺陷的質量分級指南 第2部分：鋁及其可焊合金 | Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001) |
| EN ISO 14713-1999 | 鋼結構腐蝕防護 鋅和鋁鍍層 指南 | Protection against corrosion of iron and steel in structures - Zinc and aluminium coatings - Guidelines (ISO 14713:1999) |
| EN ISO 15546-2002 | 石油和天然氣工業 鋁合鉆管 | Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2002) |
| EN ISO 3262-16-2000 | 涂料用填充劑 規范和測試方法 第16部分：氫氧化鋁 | Extenders for paints - Specifications and methods of test - Part 16: Aluminium hydroxides (ISO 3262-16:2000) |
| EN ISO 3262-18-2000 | 涂料用填充劑 規范和測試方法 第18部分：沉淀硅鋁酸鈉 | Extenders for paints - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate (ISO 3262-18:2000) |
| EN ISO 3613-2001 | 鋅、鎘、鋁鋅合金和鋅鋁合金的鉻酸鹽轉化膜 試驗方法 | Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2000) |
| EN ISO 8362-3-2003 | 注射劑用注射器容器及附件 第3部分：注射瓶鋁蓋 | Injection containers and accessories - Part 3: Aluminium caps for injection vials (ISO 8362-3:2001) |
| EN ISO 8536-3-1999+AC-1999 | 醫用輸液器具 第3部分：輸液瓶鋁蓋 | Infusion equipment for medical use - Part 3: Aluminium caps for infusion bottles (ISO 8536-3:1992) |
| EN ISO 8872-2003 | 輸血、輸液和注射瓶鋁蓋 一般要求和試驗方法 | Aluminium caps for transfusion, infusion and injection bottles - General requirements and test methods (ISO 8872:2003) |
| EN ISO 9692-3-2001 | 焊接和相關工藝 接頭制備的建議 第3部分：鋁及鋁合金的金屬焊條惰性氣體保護焊和鎢焊條惰性氣體保護焊 | Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2000) |
| ENV 14226-2002 | 高級陶瓷 陶粉的試驗方法 用感應耦合等離子原子發射光譜法或火焰原子吸收光譜法測定氮化硅中的鈣、鎂、 | Advanced technical ceramics - Test methods for ceramic powders - Determination of calcium, magnesium, iron and aluminium in silicon nitride by using flame atomic absorption spectroscopy (FAAS) or inductively coupled plasma atomic emission spectroscopy (I |
| ENV 1999-1-1-1998 | 歐洲法典9：鋁結構設計 第1-1部分：一般規則 建筑物的一般規則 | Eurocode 9: Design of aluminium structures - Part 1-1: General rules - General rules and rules for buildings |
| ENV 1999-1-2-1998 | 歐洲法典 9：鋁結構設計 第1-2部分：一般規則 結構防火設計 | Eurocode 9: Design of aluminium structures - Part 1-2: General rules - Structural fire design |
| ENV 1999-2-1998 | 歐洲法典9：鋁結構設計 第2部分：易疲勞結構 | Eurocode 9: Design of aluminium structures - Part 2: Structures susceptible to fatigue |
| ENV 725-4-1994 | 先進技術陶瓷 陶瓷粉的試驗方法 第4部分：XRF分析法測定氮化鋁中氧的含量 | Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of the oxygen content in aluminium nitride by XRF analysis |
| ENV 955-4-1997 | 耐熔產品的化學分析 第4部分：含有硅和/或鋁的產品（通過火焰原子吸收光譜法（FAAS）和誘導偶合等離子原子 | Chemical analysis of refractory products - Part 4: Products containing silica and/or alumina (Analysis by Flame Atomic Absorption Spectrometry (FAAS) and Inductively Coupled Plasma Atomic Emission Spectrography (ICP)) |
| prEN 10318-2000 | 鋅基和鋁基金屬鍍層厚度和化學成分的測定 常規方法 | Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method |
| prEN 12206-1-2001 | 色漆和清漆 建筑用途的鋁和鋁合金涂層 第1部分：由粉末涂料的配制涂層 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from powder coating materials |
| prEN 12258-2-2001 | 鋁和鋁合金 術語和定義 第2部分：化學分析 | Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis |
| prEN 12441-8-2002 | 鋅和鋅合金 化學分析 第8部分：用電感耦合等離子原子發射光譜測定鉛、鐵和鋁 | Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc; Flame atomic absorption spectrometric method |
| prEN 130310-1993 | 分規范：非固體電解質鋁電解質電容器(能力批準) | Sectional specification: aluminium electrolytic capacitors with non-solid electrolyte (capability approval) |
| prEN 130311-1993 | 空白詳細規范：非固體電解質鋁電解質電容器(能力批準) | Blank detail specification: aluminium electrolytic capacitors with non-solid electrolyte (capability approval) |
| prEN 13981-2-2001 | 鋁和鋁合金 鐵路結構用產品，檢驗和交貨技術條件 第2部分：板材和片材 | Aluminium and aluminium alloys - Products for structural railway applications; Technical conditions for inspection and delivery - Part 2: Plates and sheets |
| prEN 14095-2003 | 建筑物內部的水質處理設備 用鋁陽極的電解配料系統 試驗、安全和性能的要求 | Water conditioning equipment inside buildings - Electrolytic treatment systems with aluminium anodes - Requirements for performance and safety, testing |
| prEN 14242-2001 | 鋁及鋁合金 化學分析 感應耦合等離子發射光譜分析 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
| prEN 14286-2001 | 鋁及鋁合金 危險貨物運輸和貯存罐的可焊軋制產品 | Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods |
| prEN 14287-2001 | 鋁及鋁合金 制造包裝及包裝部件用鋁材化學成分的特殊要求 | Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components |
| prEN 14361-2001 | 鋁及鋁合金 化學分析 金屬熔化取樣 | Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts |
| prEN 14369-2003 | 人類生活用水的處理用產品 鐵涂覆活性顆粒氧化鋁 | Products used for treatment of water intended for human consumption - Iron coated granular activated alumina |
| prEN 14391-2002 | 包裝 可活動鋁管 危險感覺警告 | Packaging - Collapsible aluminium tubes - Tactile warnings of danger |
| prEN 14392-2003 | 鋁及鋁合金 與食物接觸的陽極處理產品的特殊要求 | Aluminium and aluminium alloys - Special requirements for anodised products for use in contact with food |
| prEN 2004-2-1997 | 航空航天系列 鋁和鋁合金產品試驗方法 第2部分：電鍍、鍛造和擠壓的超聲試驗 | Test methods for aluminium and aluminium alloy products - Part 2: Ultrasonic testing of plates, forgings and extrusions; Aerospace series |
| prEN 2051-1977 | 航空航天系列 L型材 鋁合金褶皺截面 尺寸 | L-section; aluminium alloy folded profiles; dimensions; aerospace series |
| prEN 2052-1977 | 航空航天系列 L型材 具有內唇狀凸緣的鋁合金褶皺截面 尺寸 | L-section; aluminium alloy folded profiles with internally lipped flanges; dimensions; aerospace series |
| prEN 2053-1977 | 航空航天系列 U型材 鋁合金褶皺截面 尺寸 | U-section; aluminium alloy folded profiles; dimensions; aerospace series |
| prEN 2054-1977 | 航空航天系列 U型材 具有外唇狀凸緣的鋁合金褶皺截面 尺寸 | U-section; aluminium alloy folded profiles with externally lipped flanges; dimensions; aerospace series |
| prEN 2055-1977 | 航空航天系列 U型材 具有內唇狀凸緣的鋁合金褶皺截面 尺寸 | U-section; aluminium alloy folded profiles with internally lipped flanges; dimensions; aerospace series |
| prEN 2056-1977 | 航空航天系列 Z型材 鋁合金褶皺截面 尺寸 | Z-section; aluminium alloy folded profiles; dimensions; aerospace series |
| prEN 2057-1977 | 航空航天系列 Z型材 具有一個唇狀凸緣的鋁合金褶皺截面 尺寸 | Z-section; aluminium alloy folded profiles with one lipped flange; dimensions; aerospace series |
| prEN 2059-1977 | 航空航天系列 TOP hat型材 鋁合金褶皺截面 尺寸 | Top hat section; aluminium alloy folded profiles; dimensions; aerospace series |
| prEN 2060-1977 | 航空航天系列 Bowler hat型材 帶唇狀凸緣的鋁合金褶皺截面 尺寸 | Bowler hat section; aluminium alloy folded profiles; dimensions; aerospace series |
| prEN 2061-1977 | 航空航天系列 TOP hat型材 帶唇狀凸緣的鋁合金褶皺截面 尺寸 | Top hat section; aluminium alloy folded profiles with lipped flanges; dimensions; aerospace series |
| prEN 2086-1998 | 航空航天系列 鋁合金AL-P2618A-T851-手工鍛件a≤150mm | Aerospace series - Aluminium alloy AL-P2618A-T851 - Hand forgings a 150 mm |
| prEN 2087-1998 | 航空航天系列 鋁合金AL-P2014A-T6或T62-包層薄板和帶材-0.4毫米a6毫米 | Aerospace series - Aluminium alloy AL-P2014A-T6 or T62 - Clad sheet and strip - 0,4 mm a 6 mm |
| prEN 2090-1998 | 航空航天系列 鋁合金AL-P2024-T3 包層薄板和帶材 0.3毫米a6毫米 | Aerospace series - Aluminium alloy AL-P2024-T3 - Clad sheet and strip - 0,3 mm a 6 mm |
| prEN 2091-1976 | 航空航天系列 鋁合金AL-P13P1-T4 包層薄板和帶材 | Aluminium alloy AL-P13 PI-T4; clad sheets and strips; aerospace series |
| prEN 2123-1999 | 航空航天系列 鋁合金AL-P2618-T851 板材 6mm≤a≤140mm | Aerospace series - Aluminium alloy AL-P2618A-T851 - Plate, 6 mm ≤ a ≤ 140 mm |
| prEN 2124-1999 | 航空航天系列 鋁合金AL-P2214-T651 板材 6mm≤a≤140mm | Aerospace series - Aluminium alloy AL-P2214-T651 - Plate, 6 mm ≤ a ≤ 140 mm |
| prEN 2143-1998 | 航空航天系列 1050A型鋁制的萬能分度頭型實心鉚釘 英制系列 | Aerospace series - Rivets, solid, universal head, in aluminium 1050A, inch based series |
| prEN 2146-1998 | 航空航天系列 2017A型鋁制的萬能分度頭型實心鉚釘 英制系列 | Aerospace series - Rivets, solid, universal head, in aluminium 2017A, inch based series |
| prEN 2148-1998 | 航空航天系列 5056A型鋁制的萬能頭型實心鉚釘 英制系列 | Aerospace series - Rivets, solid, universal head, in aluminium 5056A, inch based series |
| prEN 2256-1998 | 航空航天系列 鋁合金AL-P2618A-T852 手工鍛造a ≤ 150 mm | Aerospace series - Aluminium alloy AL-P2618A-T852 - Hand forgings a ≤ 150 mm |
| prEN 2345-1982 | 航空航天系列 鋁和鋁合金鉚釘 技術規范 | Aerospace series; aluminium and aluminium alloy rivets; technical specification |
| prEN 2345-2-1999 | 航空航天系列 鋁和鋁合金實芯鉚釘 米制系列 技術規范 | Aerospace series - Rivets, solid, in aluminium or aluminium alloy, metric series - Technical specification |
| prEN 2382-1998 | 航空航天系列 AL-P2214-T6鋁合金 a 100 mm手工和模壓鍛件 | Aerospace series - Aluminium alloy AL-P2214-T6 - Hand and die forgings a 100 mm |
| prEN 2383-1998 | 航空航天系列 AL-P2214-T4鋁合金 a 100 mm手工和模壓鍛件 | Aerospace series - Aluminium alloy AL-P2214-T4 - Hand and die forgings a 100 mm |
| prEN 2386-1998 | 航空航天系列 AL-P7075-T7352鋁合金 a或D 150mm手工鍛造 | Aerospace series - Aluminium alloy AL-P7075-T7352 - Hand forgings a 150 mm |
| prEN 2419-1999 | 航空航天系列 鋁合金AL-P2024-T351 板材 6 mm≤ a ≤ 80 mm | Aerospace series - Aluminium alloy AL-P2024-T351 - Plate, 6 mm ≤ a ≤ 80 mm |
| prEN 2485-1998 | 航空航天系列 鋁合金AL-P2214 鍛坯 | Aerospace series - Aluminium alloy AL-P2214 - Forging stock |
| prEN 2486-1998 | 航空航天系列 鋁合金AL-P2618A 鍛坯 | Aerospace series - Aluminium alloy AL-P2618A - Forging stock |
| prEN 2511-1998 | 航空航天系列 鋁合金AL-P7075-T7351 板材 6 mm a 100 mm | Aerospace series - Aluminium alloy AL-P7075-T7351 - Plate, 6 mm a 100 mm |
| prEN 2512-1999 | 航空航天系列 鋁合金AL-P7175-T7351 板材 6 mm a 100 mm | Aerospace series - Aluminium alloy AL-P7175-T7351 - Plate, 6 mm a 100 mm |
| prEN 2550-1999 | 航空航天系列 1050A型鋁制100°沉頭實心鉚釘 英制系列 | Aerospace series - Rivets, solid, 100?countersunk normal head, in aluminium 1050A, inch based series |
| prEN 2551-1999 | 航空航天系列 2117型鋁合金制100°沉頭圓頂實心鉚釘 英制系列 | Aerospace series - Rivets, solid, 100?countersunk normal head with dome, in aluminium alloy 2117, inch based series |
| prEN 2552-1999 | 航空航天系列 陽極氧化或鉻酸鹽表面處理的2117型鋁合金100°沉頭圓頂實心鉚釘 英制系列 | Aerospace series - Rivets, solid, 100?countersunk normal head with dome, in aluminium alloy 2117, anodized or chromated, inch based series |
| prEN 2553-1999 | 航空航天系列 2017A型鋁合金制100°沉頭圓頂實心鉚釘 英制系列 | Aerospace series - Rivets, solid, 100?countersunk normal head with dome, in aluminium alloy 2017A, inch based series |
| prEN 2555-1999 | 航空航天系列 5056A型鋁合金制100°沉頭圓頂實心鉚釘 英制系列 | Aerospace series - Rivets, solid, 100?countersunk normal head with dome, in aluminium alloy 5056A, inch based series |
| prEN 2556-1999 | 航空航天系列 陽極氧化或鉻酸鹽表面處理的5056A型鋁合金制 100°沉頭圓頂實心鉚釘 英制系列 | Aerospace series - Rivets, solid, 100?countersunk normal head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series |
| prEN 2635-1998 | 航空航天系列 Al-P2014A-T6511鋁合金 a 或D≤200 mm的周圍有粗粒控制的擠壓桿和部件 | Aerospace series - Aluminium alloy Al-P2014A-T6511 - Extruded bar and section - a or D ≤ 200 mm - With peripheral coarse grain control |
| prEN 2681-1998 | 航空航天系列 AL-P7010-T74鋁合金 手工鍛件和硬模鍛件 a ≤150 mm | Aerospace series - Aluminium alloy AL-P7010-T74 - Hand and die forgings a 150 mm |
| prEN 2682-1998 | 航空航天系列 AL-P7010-T7452鋁合金 手工鍛件和硬模鍛件 a≤ 150 mm | Aerospace series - Aluminium alloy AL-P7010-T7452 - Hand and die forgings a 150 mm |
| prEN 2683-1998 | 航空航天系列 AL-P7010-T7651鋁合金 手工鍛件和硬模鍛件 a ≤ 150 mm | Aerospace series - Aluminium alloy AL-P7010-T7651 - Hand forgings a 150 mm |
| prEN 2684-1999 | 航空航天系列 AL-P7010-T7651鋁合金 板材 6 mm ≤ a ≤ 140 mm | Aerospace series - Aluminium alloy AL-P7010-T7651 - Plate 6 mm a 140 mm |
| prEN 2686-1998 | 航空航天系列 AL-P7010-T7451鋁合金 手工鍛件 a ≤ 150 mm | Aerospace series - Aluminium alloy AL-P7010-T7451 - Hand forgings a 150 mm |
| prEN 2687-1999 | 航空航天系列 AL-P7010-T7451鋁合金 板材 6 mm ≤ a≤ 160 mm | Aerospace series - Aluminium alloy AL-P7010-T7451 - Plate 6 mm a 160 mm |
| prEN 2688-1998 | 航空航天系列 AL-P7050-T74鋁合金 硬模鍛件 a ≤150 mm | Aerospace series - Aluminium alloy AL-P7050-T74 - Die forgings a 150 mm |
| prEN 2690-1998 | 航空航天系列 AL-P7050-T7452鋁合金 手工鍛件 a ≤ 200 mm | Aerospace series - Aluminium alloy AL-P7050-T7452 - Hand forgings - a 200 mm |
| prEN 2702-1998 | 航空航天系列 AL-P6061-T6或T62鋁合金 拔拉或擠壓桿和型材 a 或 D ≤ 150 mm | Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Drawn or extruded bar and section - a or D ≤ 150 mm |
| prEN 2726-2001 | 航空航天系列 AL-C42201 T6鋁合金 沙模鑄件 a ≤20 mm | Aerospace series - Aluminium alloy AL-C42201 T6 - Sand casting a 20 mm |
| prEN 2728-2001 | 航空航天系列 AL-C42101 T6鋁合金 沙模鑄件 a ≤20 mm | Aerospace series - Aluminium alloy AL-C42101 T6 - Sand casting a 20 mm |
| prEN 2802-1999 | 航空航天系列 AL-P7475-T761鋁合金 薄板和帶材 0,6 mm ≤a≤6 mm | Aerospace series - Aluminium alloy AL-P7475-T761 - Sheet and strip 0,6 mm a 6 mm |
| prEN 2803-1999 | 航空航天系列 AL-P7475-T761鋁合金 復合薄板和帶材1 mm ≤a ≤ 6 mm | Aerospace series - Aluminium alloy AL-P7475-T761 - Clad sheet and strip 1 mm a 6 mm |
| prEN 2804-1999 | 航空航天系列 AL-P7075-T7651鋁合金 板材6 mm ≤ a ≤ 25 mm | Aerospace series - Aluminium alloy AL-P7075-T7651 - Plate, 6 mm a 25 mm |
| prEN 2805-1999 | 航空航天系列 AL-P7475-T7651鋁合金 板材6 mm≤a≤40 mm | Aerospace series - Aluminium alloy AL-P7475-T7651 - Plate, 6 mm a 40 mm |
| prEN 2813-1999 | 航空航天系列 AL-P6061-T6鋁合金 壓力用拉管 0,6 mm≤a≤12,5 mm | Aerospace series - Aluminium alloy AL-P6061-T6 - Drawn tube for pressure applications 0,6 mm a 12,5 mm |
| prEN 288-13-1995 | 金屬材料焊接程序規范和鑒定 第13部分：鋁和鑄鍛材料化合物弧焊的焊接程序試驗 | Specification and approval of welding procedures for metallic materials - Part 13: Welding procedure tests for the arc welding of aluminium and combinations of cast to wrought material (ISO 9956-3:1995) |
| prEN 3115-2000 | 航空航天系列 AL-P7050鋁合金鉚釘用鋁絲 D≤10 mm | Aerospace series - Aluminium alloy AL-P7050 - Wire for rivets - D 10 mm |
| prEN 3124-2001 | 航空航天系列 AL-C42201 T6鋁合金 高強度鑄件 a ≤ 20 mm | Aerospace series - Aluminium alloy AL-C42201 T6 - High strength casting a 20 mm |
| prEN 3125-2001 | 航空航天系列 AL-C42201 T6鋁合金 熔模鑄件 a ≤20 mm | Aerospace series - Aluminium alloy AL-C42201 T6 - Investment casting a 20 mm |
| prEN 3332-1999 | 航空航天系列 鋁合金 AL-P7475-T762 1 mm≤a≤6 mm復合薄板和帶材 | Aerospace series - Aluminium alloy AL-P7475-T762 - Clad sheet and strip 1 mm a 6 mm |
| prEN 3333-1999 | 航空航天系列 鋁合金 AL-P7475-T762 0,6 mm≤a≤6 mm復合薄板和帶材 | Aerospace series - Aluminium alloy AL-P7475-T762 - Sheet and strip 0,6 mm a 6 mm |
| prEN 3335-1999 | 航空航天系列 鋁合金 AL-P7475-O2 0,8 mm≤a≤6 mm超塑性模壓板材 | Aerospace series - Aluminium alloy AL-P7475-O2 - Sheet for superplastic forming (SPF) 0,8 mm a 6 mm |
| prEN 3336-1999 | 航空航天系列 鋁合金 AL-P7150-T651 6 mm≤a≤40 mm板材 | Aerospace series - Aluminium alloy AL-P7150-T651 - Plate, 6 mm a 40 mm |
| prEN 3338-1999 | 航空航天系列 鋁合金 AL-P7050-T74511a 或 D≤150 mm具有邊緣粗顆粒控制擠壓棒和型材 | Aerospace series - Aluminium alloy AL-P7050-T74511 - Extruded bar and section a or D 150 mm with peripheral coarse grain control |
| prEN 3339-1998 | 航空航天系列 鋁合金 AL-P7010-T76 a≤200 mm模鍛件 | Aerospace series - Aluminium alloy AL-P7010-T76 - Die forgings - a 200 mm |
| prEN 3341-1998 | 航空航天系列 鋁合金 Al-P6061 T4 或 T42 0,4 mm≤a≤6 mm薄板及帶材 | Aerospace series - Aluminium alloy Al-P6061-T4 or T42 - Sheet and strip - 0,4 mm a 6 mm |
| prEN 3342-1998 | 航空航天系列 鋁合金 AL-P6061 T4 或 T42 a或D ≤150 mm拉制或擠壓棒和型材 | Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Drawn or extruded bar and section - a or D 150 mm |
| prEN 3344-1999 | 航空航天系列 鋁合金 AL-P7050-T76511 a 或 D ≤150 mm 具有邊緣粗顆粒控制擠壓棒和型材 | Aerospace series - Aluminium alloy AL-P7050-T76511 - Extruded bar and section a or D 150 mm with peripheral coarse grain control |
| prEN 3346-1997 | 航空航天系列 鋁合金 AL-P2014A-T3 0,6 mm≤a≤12,5 mm結構用的拉制管 | Aerospace series - Aluminium alloy AL-P2014A-T3 - Drawn tube for structural applications - 0,6 mm a 12,5 mm |
| prEN 3347-1998 | 航空航天系列 鋁合金 Al-P2024-T8511 a 或 D≤150 mm 帶邊緣粗顆粒控制擠壓棒和型材 | Aerospace series - Aluminium alloy Al-P2024-T8511 - Extruded bar and section - a or D 150 mm - With peripheral coarse grain control |
| prEN 3474-1998 | 航空航天系列 AL-P2024-T81鋁合金 0,25 mm ≤a≤6 mm薄板和帶材 | Aerospace series - Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm a 6 mm |
| prEN 3553-1999 | 航空航天系列 AL-P2618A-T6511鋁合金 擠壓棒和型材 a 或 D≤160 mm | Aerospace series - Aluminium alloy AL-P2618A-T6511 - Extruded bar and section a or D 160 mm |
| prEN 3557-1997 | 航空航天系列 AL-P6061-T4鋁合金 壓力用拉制管 0,6 mm ≤a≤3,0 mm | Aerospace series - Aluminium alloy AL-P6061-T4 - Drawn tube for pressure applications 0,6 mm a 3,0 mm |
| prEN 3719-1999 | 航空航天系列 電纜用鋁和鋁合金導體 產品標準 | Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard |
| prEN 3982-2000 | 航空航天系列 鋁合金 AL-P7050-T7451 板6 mm≤a≤160 mm | Aerospace series - Aluminium alloy AL-P7050-T7451 - Plate 6 mm a 160 mm |
| prEN 3983-2000 | 航空航天系列 鋁合金AL-P7050-T7651 板6 mm≤a≤160 mm | Aerospace series - Aluminium alloy AL-P7050-T7651 - Plate 6 mm a 160 mm |
| prEN 4071-1999 | 航空航天系列 鋁 IVD涂層鈦合金標準六角頭緊公差普通柄短螺紋螺栓 等級：1100 MPa(環境溫度) /425℃ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃ |
| prEN 4072-1999 | 航空航天系列 鋁 IVD涂層鈦合金、100°埋頭標準頭偏十字凹槽緊公差普通柄短螺紋螺釘 等級：1100 MPa(環境 | Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃ |
| prEN 4100-1993 | 航空航天系列 鋁合金 AL-P2219-T62 薄板和帶材 0,5 mm≤a≤6 mm | Aerospace series - Aluminium alloy AL-P2219-T62 - Sheet and strip 0,5 mm a 6 mm |
| prEN 4127-1999 | 航空航天系列 鈦合金鋁 IVD涂層、標準六角頭松公差普通柄短螺紋螺栓 等級：1100 MPa (環境溫度)/425 ℃ | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVDcoated - Classification: 1100 MPa (at ambient temperature)/425℃ |
| prEN 4128-1999 | 航空航天系列 耐熱鎳基合金鋁 IVD涂層、標準六角邊頭松公差普通柄短螺紋螺栓 等級：1250 MPa (環境溫度)/ | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1250 MPa (at ambient temperature)/425℃ |
| prEN 4174-1999 | 航空航天系列 陽極氧化或鉻酸鹽處理鋁合金 2024、鉚緊剪式墊圈 米制 | Aerospace series - Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series |
| prEN 4176-1999 | 航空航天系列 陽極氧化或有鋁色涂層鈦合金TI-P64001、100°埋頭標準頭或突出頭的張力剪式緊公差鎖緊螺栓、 | Aerospace series - Lockbolts, 100?countersunk normal head or protruding head, tension-sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metric |
| prEN 4204-1999 | 航空航天系列 鋁合金 AL-P8090-T841 薄板 0,6 mm≤a≤6 mm | Aerospace series - Aluminium alloy AL-P8090-T841 - Sheet 0,6 mm a 6 mm |
| prEN 4207-1999 | 航空航天系列 鋁合金 AL-P8090-T89周圍粗粒控制的擠壓棒和型材 a 或 D≤15 mm | Aerospace series - Aluminium alloy AL-P8090-T89 - Extruded bar and section, a or D 15 mm with peripheral coarse grain control |
| prEN 4272-1997 | 航空航天系列 鋁合金 AL-P2219-T854 鍛件 a ≤200 mm | Aerospace series - Aluminium alloy AL-P2219-T854 - Die forgins, a 200 mm |
| prEN 4273-1997 | 航空航天系列 鋁合金 AL-P6082-T6511 擠壓棒和型材、a或 D ≤200 mm | Aerospace series - Aluminium alloy AL-P6082-T6511 - Extruded bar and section, a or D 200 mm |
| prEN 4274-1997 | 航空航天系列 鋁合金 AL-P6082-T6511周圍粗粒控制的擠壓棒和型材 a 或 D≤200 mm | Aerospace series - Aluminium alloy AL-P6082-T6511 - Extruded bar and section, a or D 200 mm with peripheral coarse grain control |
| prEN 4275-1997 | 航空航天系列 鋁合金 AL-P7075-T76511周圍粗粒控制的擠壓棒和型材 a 或 D ≤100 mm | Aerospace series - Aluminium alloy AL-P7075-T76511 - Extruded bar and section, a or D 100 mm with peripheral coarse grain control |
| prEN 4276-1998 | 航空航天系列 鋁合金 AL-P7175-T7351 手制鍛件 a ≤150 mm | Aerospace series - Aluminium alloy AL-P7175-T7351 - Hand forgings a 150 mm |
| prEN 4277-1998 | 航空航天系列 鋁合金 AL-P7175-T7351 手制鍛件和模件鍛 a ≤125 mm | Aerospace series - Aluminium alloy AL-P7175-T73 - Hand and die forgings a 125 mm |
| prEN 4278-1998 | 航空航天系列 鋁合金 AL-P7175-T7352 手制鍛件和模鍛件 a ≤150 mm | Aerospace series - Aluminium alloy AL-P7175-T7352 - Hand and die forgings a 150 mm |
| prEN 4282-1998 | 航空航天系列 鋁合金 AL-P2219-T37 板材 6 mm ≤a≤ 40 mm | Aerospace series - Aluminium alloy AL-P2219-T37 - Plate 6 mm a 40 mm |
| prEN 4283-1998 | 航空航天系列 鋁合金 AL-P2219-T87 板材 6 mm≤a≤40 mm | Aerospace series - Aluminium alloy AL-P2219-T87 - Plate 6 mm a 40 mm |
| prEN 4284-1998 | 航空航天系列 鋁合金 AL-P2219-T852 鍛件 a≤400 mm | Aerospace series - Aluminium alloy AL-P2219-T852 - Forgings a 400 mm |
| prEN 4285-1998 | 航空航天系列 鋁合金 AL-P2219-T851 鍛件a≤400 mm | Aerospace series - Aluminium alloy AL-P2219-T851 - Forgings a 400 mm |
| prEN 4287-1998 | 航空航天系列 鋁合金 AL-P7010 鍛坯 | Aerospace series - Aluminium alloy AL-P7010 - Forging stock |
| prEN 4288-1998 | 航空航天系列 鋁合金 AL-P7050 鍛坯 | Aerospace series - Aluminium alloy AL-P7050 - Forging stock |
| prEN 4289-1998 | 航空航天系列 鋁合金 AL-P7175 鍛坯 | Aerospace series - Aluminium alloy AL-P7175 - Forging stock |
| prEN 4290-1998 | 航空航天系列 鋁合金 AL-P2219 鍛坯 | Aerospace series - Aluminium alloy AL-P2219- - Forging stock |
| prEN 4293-1998 | 航空航天系列 鋁合金 AL-P7175-T73511 擠壓棒和型材a 或 D≤150 mm | Aerospace series - Aluminium alloy AL-P7175-T73511 - Extruded bar and section a or D 150 mm |
| prEN 4294-1998 | 航空航天系列 鋁合金 AL-P7175-T7354 模鍛件a≤150 mm | Aerospace series - Aluminium alloy AL-P7175-T7354 - Die forgings a 150 mm |
| prEN 4312-1999 | 航空航天系列 帶鋁色涂層制 耐熱和耐腐蝕鋼、松公差異徑柄中等長度螺紋的雙頭螺栓 等級：1100 MPa (常溫 | Aerospace series - Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4313-1998 | 航空航天系列 鋁合金 AL-P6013-T6 薄板和帶 0,5 mm≤a≤ 6 mm | Aerospace series - Aluminium alloy AL-P6013-T6 - Sheet and strip 0,5 mm a 6 mm |
| prEN 4360-2000 | 航空航天系列 陽極氧化或鉻酸鹽處理鋁合金 7050、制１００°帶圓頂短頭實心鉚釘 米制 | Aerospace series - Rivets, solid, 100?countersunk reduced head with dome, in aluminium alloy 7050, anodized or chromated - Metric series |
| prEN 4361-2000 | 航空航天系列 陽極氧化或鉻酸鹽處理鋁合金 5056A、制１００°帶圓頂短頭實心鉚釘 米制 | Aerospace series - Rivets, solid, 100?countersunk reduced head with dome, in aluminium alloy 5056A, anodized or chromated - Metric series |
| prEN 4363-1999 | 航空航天系列 帶鋁色涂層鈦合金 Ti 44,5 Cb、制１００°埋頭短頭實心鉚釘 米制 | Aerospace series - Rivets, solid, 100?countersunk reduced head, in titanium alloy Ti 44,5 Cb, with aluminium pigmented coating, metric series |
| prEN 4400-1-1999 | 航空航天系列 鋁和鋁合金鍛制品 技術規范 第1部分：板材 | Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 1: Plate |
| prEN 4400-2-2000 | 航空航天系列 鋁和鋁合金鍛制品 技術規范 第2部分：薄板、帶材 | Aerospace series - Aluminium and aluminium alloy wrought products; technical specification - Part 2: Sheet and strip |
| prEN 4400-3-2001 | 航空航天系列 鋁和鋁合金鍛制品 技術規范 第３部分：棒材和型材 | Aerospace series; Aluminium and aluminium alloy wrought products; Technical specification - Part 3: Bar and section |
| prEN 4401-1999 | 航空航天系列 米制有鋁色涂層鈦合金TI-P64001緊公差剪式突頭鎖緊螺栓 等級：1100 MPa (常溫)/315℃ | Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4402-1999 | 航空航天系列 米制有鋁色涂層鈦合金TI-P64001緊公差剪式100度埋頭標準頭鎖緊螺栓 等級：1100 MPa (常溫)/ | Aerospace series - Lockbolts, 100?countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4403-1999 | 航空航天系列 有鋁色涂層鈦合金Ti44, 5 Cb100度埋頭標準頭實心鉚釘 米制 | Aerospace series - Rivets, solid, 100?countersunk normal head, in titanium alloy Ti 44,5 Cb, with aluminium pigmented coating - metric series |
| prEN 4404-1999 | 航空航天系列 有鋁色涂層鈦合金Ti44, 5 Cb通用頭實心鉚釘 米制 | Aerospace series - Rivets, solid, universal head, in titanium alloy Ti 44,5 Cb, with aluminium pigmented coating - metric series |
| prEN 4407-1997 | 航空航天系列 有IVD鋁涂層的鈦合金全螺紋頭標準六角螺栓 等級：1100 MPa(常溫)/315度 | Aerospace series - Bolts, normal hexagonal head, threaded to head, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃ |
| prEN 4409-1998 | 航空航天系列 鋁和鋁合金擠制方桿 厚度6 mm≤a≤200 mm-尺寸 | Aerospace series - Square bars, extruded in aluminium and aluminium alloys - Thickness 6 mm a 200 mm - Dimensions |
| prEN 4410-1998 | 航空航天系列 鋁和鋁合金擠制矩形桿 厚度為6 mm≤a≤160 mm 尺寸 | Aerospace series - Rectangular bars, extruded in aluminium and aluminium alloys - Thickness 6 mm a 160 mm - Dimensions |
| prEN 4448-1998 | 航空航天系列 AL-P7050-T7452鋁合金 模鍛件 a≥150 mm | Aerospace series - Aluminium alloy AL-P7050-T7452 - Die forgings a 150 mm |
| prEN 4449-1998 | 航空航天系列 鋁合金AL-P7050-T7651 薄板0.8≤a≤6 mm | Aerospace series - Aluminium alloy AL-P7050-T7651 - Sheet 0,8 mm a 6 mm |
| prEN 4450-1998 | 航空航天系列 AL-P7050-T762鋁合金 薄板 0.8≤a≤6 mm | Aerospace series - Aluminium alloy AL-P7050-T762 - Sheet 0,8 mm a 6 mm |
| prEN 4457-1999 | 航空航天系列 AL-P7050-T7351鋁合金 板 6≤a≤100 mm | Aerospace series - Aluminium alloy AL-P7475-T7351 - Plate 6 mm a 100 mm |
| prEN 4473-1999 | 航空航天系列 鋁涂層 技術規范 | Aerospace series - Aluminium pigmented coatings - Technical specification |
| prEN 4474-1999 | 航空航天系列 鋁涂層 涂覆方法 | Aerospace series - Aluminium pigmented coatings - Coating methods |
| prEN 4495-1999 | 航空航天系列 鋁涂層陽極氧化鈦合金緊公差標準體短螺紋 標準六角頭螺栓 等級：1100 MPa (環境溫度下)/31 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4496-1999 | 航空航天系列 鋁涂層陽極氧化鈦合金緊公差標準體短螺紋十字形埋頭100度 標準頭螺釘 等級：1100 MPa (環 | Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4497-1999 | 航空航天系列 鋁涂層陽極氧化鈦合金緊公差標準體短螺紋十字口錐形頭螺釘 等級：1100 MPa (環境溫度下)/31 | Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4498-1999 | 航空航天系列 鋁涂層鈍化耐熱鎳基合金緊公差標準體中長螺紋大雙頭六角頭螺栓 等級：1550 MPa (環境溫度下 | Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating - Classification: 1550 MPa (at ambient temperature)/315℃ |
| prEN 4499-1999 | 航空航天系列 鋁涂層陽極氧化鈦合金緊公差標準體短螺紋十字口矮頭埋頭100度螺釘 等級：1100 MPa (環境溫 | Aerospace series - Screws, 100?countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4501-1999 | 航空航天系列 鋁涂層陽極氧化鈦合金緊公差標準體短螺紋帶肩薄六角頭螺栓 等級：1100 MPa (環境溫度下)/31 | Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4509-1999 | 航空航天系列 鋁涂層陽極氧化鈦合金全螺紋十字口埋頭100度 標準螺釘 等級：1100 MPa (環境溫度下)/315℃ | Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4525-1998 | 航空航天系列 鋁和鋁合金 試驗方法 剪切試驗 | Aerospace series - Aluminium and aluminium alloys - Test methods - Shear testing |
| prEN 4527-1998 | 航空航天系列 鋁和鋁合金制品 試驗方法 應力開裂敏感度的測定 | Aerospace series - Aluminium and aluminium alloy products - Test methods - Determining susceptibility to stress-corrosion cracking |
| prEN 485-2-1999 | 鋁和鋁合金 片材、帶材和板材 第2部分：機械性能 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties |
| prEN 573-4-2003 | 鋁和鋁合金 鍛制產品化學成分和外形 第4部分：產品外形 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4: Forms of products / Note: Intended as replacement for EN 573-4 (1994-08). |
| prEN 573-5-1999 | 鋁和鋁合金 鍛制產品化學成分和外形 第5部分：標準化鍛制產品的編纂法典 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products |
| prEN 576-2002 | 鋁和鋁合金 再熔非合金鋁錠 規范 | Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications |
| prEN 6000-1998 | 航空航天系列 AL-P2024-T351鋁合金 板 6.0 mm≤a≤55 mm 緊公差平面度 | Aerospace series - Aluminium alloy AL-P2024-T351 - Plate - 6,0 mm a 55 mm - Close-tolerances flatness |
| prEN 601-2003 | 鋁和鋁合金 鑄件 與食品接觸用鑄件的化學成分 | Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff / Note: Intended as replacement for EN 601 (1994-11). |
| prEN 602-2003 | 鋁和鋁合金 鍛制品 生產與食品接觸的材料中使用的半成品的化學成分 | Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff / Note: Intended as replacement for EN 602 (1994-11). |
| prEN 6025-1998 | 航空航天系列 板材 AL-P2024鋁合金 緊公差平面度 6 mm≤a≤55 mm 厚度 尺寸 | Aerospace series - Plates - Aluminium alloy 2024 - Close-tolerance flatness - Thickness 6 mm a 55 mm - Dimensions |
| prEN 60384-4-1999 | 電子設備用固定電容器 第4部分：分規范 固體和非固體電解質鋁電解電容器 | Fixed capacitors for use in electronic equipment - Part 4: Sectional specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte (IEC 60384-4:1998) |
| prEN 60384-4/prA1-1999 | 電子設備用固定電容器 第4部分：分規范 固體和非固體電解質鋁電解電容器 修改草案１ | Amendment 1 to IEC 60384-4 |
| prEN 6050-2001 | 航空航天系列 7050鋁合金化學薄膜的剪型沖模鎖緊緊公差的100度埋頭的軋制銷 英制系列 | Aerospace series - Pins, close tolerance, swage locking, 100?countersunk head reduced, shear type, in aluminium alloy 7050, chemical film - Inch series |
| prEN 6051-2001 | 航空航天系列 3003鋁合金化學薄膜剪型沖模鎖緊卡圈 英制系列 | Aerospace series - Collars, swage locking, shear type, in aluminium alloy 3003, chemical film - Inch series |
| prEN 6054-2001 | 航空航天系列 6061鋁合金化學薄膜剪型沖模鎖緊卡圈 英制系列 | Aerospace series - Collars, swage locking, shear type, in aluminium alloy 6061, chemical film - Inch series |
| prEN 60614-2-7-1995 | 電氣裝置用導管規范 第２部分：導管的特殊規范 第７節：無螺紋鋁合金剛性導管 | Draft IEC 614-2-7: Conduits for electrical installations - Specification - Part 2: Particular specifications for conduits - Section 7: Rigid non-threadable conduits of aluminium alloy |
| prEN 6070-1998 | 航空航天系列 鋁和鋁合金 鍛件 技術規范 通用要求 | Aerospace series - Aluminium and aluminium alloy - Wrought products - Technical specification - General requirements |
| prEN 6071-1998 | 航空航天系列 鋁和鋁合金 鍛件 技術規范 中厚板 | Aerospace series - Aluminium and aluminium alloy - Wrought products - Technical specification - Plate |
| prEN 6073-1998 | 航空航天系列 金屬材料 鋁和鋁合金 試驗方法 沖擊試驗 | Aerospace series - Metallic materials - Aluminium and aluminium alloys - Test methods - Drop test |
| prEN 6100-2001 | 航空航天系列 7050鋁合金化學薄膜的100度埋頭剪型沖模鎖緊的緊公差銷 | Aerospace series - Pins, close tolerance, swage locking, 100?countersunk head shear type, in aluminium alloy 7050, chemical film - Inch series |
| prEN 61035-2-4-1995 | 電氣裝置用導管配件規范 第２部分：特殊需要 第４節：鋁合金導管配件 | Draft IEC 1035-2-4: Specification for conduit fittings for electrical installations - Part 2: Particular specifications - Section 4: Conduit fittings of aluminium alloy |
| prEN 6104-2001 | 航空航天系列 鋁或鋁合金實心鉚釘 技術規范 英制系列 | Aerospace series - Rivets, solid, in aluminium or aluminium alloy - Inch series; Technical specification |
| prEN 61545-1995 | 組安全出版物 連接器件 任何材料的夾緊裝置中的鋁線和鋁包夾緊裝置中銅線的連接器件 | Draft IEC 1545: Group safety publication: Connecting devices - Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units |
| prEN 630-1992 | 鋁及其焊接合金中的電弧焊接頭 缺陷質量級別指南 | Arc-welded joints in aluminium and its weldable alloys; guidance on quality levels for imperfections (ISO/DIS 10042 modified) |
| prEN 878-2002 | 人類用水處理用的化學制品 硫酸鋁 | Chemicals used for treatment of water intended for human consumption - Aluminium sulfate |
| prEN 879-1992 | 人類用水處理用低鐵級硫酸鋁 | Aluminium sulfate, low-iron grade, used for treatment of water intended for human consumption |
| prEN 880-1992 | 人類用水處理用特殊級硫酸鋁 | Aluminium sulfate, special grade, used for treatment of water intended for human consumption |
| prEN ISO 15614-2-2000 | 金屬焊接工藝的規范和驗收 焊接工藝試驗 第2部分：鋁及其合金的電弧焊 | Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO/DIS 15614-2:2000) |
| prEN ISO 18273-2003 | 焊接消耗材料 鋁及鋁合金電弧焊用絲狀電極、焊絲和焊條 分類 | Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (ISO/FDIS 18273:2003) |
| 編號 | 中文名稱 | 英文名稱 |